2009/09/07

Cheapest & Latest BSI Standard (PDF) (18)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 14728:2005 BS EN 14728:2005. Imperfections in thermoplastic welds. Classification
BS 1435-2:2005 BS 1435-2:2005. Rubber hose assemblies for oil suction and discharge services. Recommendations for storage, testing and use
BS EN 1992-2:2005 BS EN 1992-2:2005. Eurocode 2. Design of concrete structures. Concrete bridges. Design and detailing rules
BS EN 61315:2006 BS EN 61315:2006. Calibration of fibre-optic power meters
BS ISO 15242-3:2006 BS ISO 15242-3:2006. Rolling bearings. Measuring methods for vibration. Radial spherical and tapered roller bearings with cylindrical bore and outside surface
ISO/IEC8825-5 : 2004 EDTN1 ISO/IEC8825-5 : 2004 EDTN1. ISO/IEC 8825-5 : 2004 Information Technology - ASN.1 encoding rules: Mapping W3C XML Schema Definitions into ASN.1
ISO/IEC18372 : 2004 EDTN1 ISO/IEC18372 : 2004 EDTN1. ISO/IEC18372 : 2004 Information technology - RapidlOTM interconnect specification
BS EN 61280-2-10:2005 BS EN 61280-2-10:2005. Fibre optic communication subsystem test procedures. Digital systems. Time-resolved chirp and alpha-factor measurement of laser transmitters
BS EN 13630-10:2005 BS EN 13630-10:2005. Explosives for civil uses. Detonating cords and safety fuses. Determination of initiating capability of detonating cords
BS EN 13523-24:2004 BS EN 13523-24:2004. Coil coated metals. Test methods. Resistance to blocking and pressure marking
BS EN 13523-20:2004 BS EN 13523-20:2004. Coil coated metals. Test methods. Foam adhesion
BS EN 13523-19:2004 BS EN 13523-19:2004. Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing
BS EN 13523-17:2004 BS EN 13523-17:2004. Coil coated metals. Test methods. Adhesion of strippable films
BS EN 13523-16:2004 BS EN 13523-16:2004. Coil coated metals. Test methods. Resistance to abrasion
BS EN 13523-12:2004 BS EN 13523-12:2004. Coil coated metals. Test methods. Resistance to scratching
BS EN 13523-11:2004 BS EN 13523-11:2004. Coil coated metals. Test methods. Resistance to solvents (rubbing test)
BS EN 50414:2006 BS EN 50414:2006. Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables. Method A: Total lead content determination with flame excitation atomic absorption spectrometry. Method B: Qualitative analysis of lead by lead sulphide staining
BS EN 60695-9-1:2005 BS EN 60695-9-1:2005. Fire hazard testing. Surface spread of flame. General guidance
BS EN 14719:2005 BS EN 14719:2005. Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction
BS ISO 1830:2005 BS ISO 1830:2005. Paper, board and pulps. Determination of acid-soluble manganese
BS EN 13757-4:2005 BS EN 13757-4:2005. Communication systems for meters and remote reading of meters. Wireless meter readout (radio meter reading for operation in the 868-870 MHz SRD band)
BS ISO 5636-4:2005 BS ISO 5636-4:2005. Paper and board. Determination of air permeance (medium range). Sheffield method
05/30096155 DC 05/30096155 DC. BS 9142. Assessment methods for environmental noise. Guide
BS ISO 806:2004 BS ISO 806:2004. Aluminium oxide primarily used for the production of aluminium. Determination of loss of mass at 300 ?C and 1 000 ?C
BS EN ISO 4892-2:2006 BS EN ISO 4892-2:2006. Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps
BS EN 14712:2005 BS EN 14712:2005. Surface active agents. Determination of physical stability in alkaline and acid solutions
BS EN 14626:2005 BS EN 14626:2005. Ambient air quality. Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
BS EN 14625:2005 BS EN 14625:2005. Ambient air quality. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN 14052:2005 BS EN 14052:2005. High performance industrial helmets
BS EN 13149-5:2004 BS EN 13149-5:2004. Public transport. Road vehicle scheduling and control systems. CANopen cabling specifications
BS EN 13149-4:2004 BS EN 13149-4:2004. Public transport. Road vehicle scheduling and control systems. General application rules for CANopen transmission buses
BS EN ISO/IEC 17050-2:2004 BS EN ISO/IEC 17050-2:2004. Conformity assessment. Supplier's declaration of conformity. Supporting documentation
04/30095958 DC 04/30095958 DC. ISO 19292. Ships and marine technology. Point-type resettable flame detectors for ships
BS EN ISO/IEC 17050-1:2004 BS EN ISO/IEC 17050-1:2004. Conformity assessment. Supplier's declaration of conformity. General requirements
BS EN ISO/IEC 17000:2004 BS EN ISO/IEC 17000:2004. Conformity assessment. Vocabulary and general principles
DD CEN ISO/TS 24530-4:2006 DD CEN ISO/TS 24530-4:2006. Traffic and traveller information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). tpeg-ptiML
DD CEN ISO/TS 24530-3:2006 DD CEN ISO/TS 24530-3:2006. Traffic and traveller information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). tpeg-rtmML
DD CEN ISO/TS 24530-2:2006 DD CEN ISO/TS 24530-2:2006. Traffic and travel information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). tpeg-locML
DD CEN ISO/TS 24530-1:2006 DD CEN ISO/TS 24530-1:2006. Traffic and travel information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). Introduction, common data types and tpegML
BS 8217:2005 BS 8217:2005. Reinforced bitumen membranes for roofing. Code of practice
BS ISO 10542-4:2004 BS ISO 10542-4:2004. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant restraint systems. Clamping-type tiedown systems
BS ISO 10542-3:2005 BS ISO 10542-3:2005. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Docking-type tiedown systems
BS ISO 7967-8:2005 BS ISO 7967-8:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Starting systems
BS ISO 7967-7:2005 BS ISO 7967-7:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Governing systems
BS ISO 7967-6:2005 BS ISO 7967-6:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Lubricating systems
BS ISO 7967-4:2005 BS ISO 7967-4:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Pressure charging and air/exhaust gas ducting systems
ISO14708-2 : 2005 EDTN1 ISO14708-2 : 2005 EDTN1. ISO14708-2 : 2005 Implants for surgery - Active implantable medical devices. Part 2 : Cardiac pacemakers
BS EN 61857-21:2004 BS EN 61857-21:2004. Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general purpose models. Wire-wound applications
BS EN 61858:2005 BS EN 61858:2005. Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS ISO 3438:2003 BS ISO 3438:2003. Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
BS EN 14713:2005 BS EN 14713:2005. Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding
BS ISO 17853:2003 BS ISO 17853:2003. Wear of implant materials. Polymer and metal wear particles. Isolation, characterization and quantification
BS EN 61400-1:2005 BS EN 61400-1:2005. Wind turbines. Design requirements
BS EN 60974-1:2005 BS EN 60974-1:2005. Arc welding equipment. Welding power sources
BS EN 62044-2:2005 BS EN 62044-2:2005. Cores made of soft magnetic materials. Measuring methods. Magnetic properties at low excitation level
BS EN 62276:2005 BS EN 62276:2005. Single crystal wafers applied for surface acoustic wave (SAW) device applications. Specification and measuring methods
BS EN 60758:2005 BS EN 60758:2005. Synthetic quartz crystal. Specifications and guide to the use
BS ISO 5797:2004 BS ISO 5797:2004. Ships and marine technology. Windows and side scuttles for fire-resistant constructions
BS ISO 16247:2004 BS ISO 16247:2004. Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
BS ISO 21005:2004 BS ISO 21005:2004. Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles
BS EN 60384-14:2005 BS EN 60384-14:2005. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
BS ISO 3140:2005 BS ISO 3140:2005. Oil of sweet orange [Citrus sinensis (L.) Obsbeck], obtained by mechanical treatment
BS EN 451-1:2003 BS EN 451-1:2003. Method of testing fly ash. Determination of free calcium oxide content
BS 6150:2006 BS 6150:2006. Painting of buildings. Code of practice
BS ISO 2974:2005 BS ISO 2974:2005. Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
BS ISO 13296:2005 BS ISO 13296:2005. Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
ISO16834 : 2006 EDTN1 ISO16834 : 2006 EDTN1. ISO16834 : 2006 Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification
BS ISO 7270-2:2005 BS ISO 7270-2:2005. Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
DD CEN ISO/TS 17845:2004 DD CEN ISO/TS 17845:2004. Welding and allied processes. Designation system for imperfections
BS EN 14710-2:2005 BS EN 14710-2:2005. Fire-fighting pumps. Fire-fighting centrifugal pumps without primer. Verification of general and safety requirements
BS EN ISO 6506-4:2005 BS EN ISO 6506-4:2005. Metallic materials. Brinell hardness test. Table of hardness values
BS EN ISO 6506-3:2005 BS EN ISO 6506-3:2005. Metallic materials. Brinell hardness test. Calibration of reference blocks
BS EN ISO 6506-2:2005 BS EN ISO 6506-2:2005. Metallic materials. Brinell hardness test. Verification and calibration of testing machines
BS EN ISO 6506-1:2005 BS EN ISO 6506-1:2005. Metallic materials. Brinell hardness test. Test method
BS EN 12697-42:2005 BS EN 12697-42:2005. Bituminous mixtures. Test methods for hot mix asphalt. Amount of coarse foreign matter in reclaimed asphalt
BS EN ISO 389-7:2005 BS EN ISO 389-7:2005. Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing under free-field and diffuse-field listening conditions
BS EN ISO 15065:2005 BS EN ISO 15065:2005. Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
BS EN 14349:2004 BS EN 14349:2004. Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in the veterinary field on non-porous surfaces without mechanical action. Test method and requirements (phase 2, step 2)
BS EN 14706:2005 BS EN 14706:2005. Thermal insulation products for building equipment and industrial installations. Determination of maximum service temperature
BS 7533-3:2005 BS 7533-3:2005. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
BS EN ISO 139:2005 BS EN ISO 139:2005. Textiles. Standard atmospheres for conditioning and testing
BS EN 10169-2:2006 BS EN 10169-2:2006. Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
DD CEN ISO/TS 15011-5:2006 DD CEN ISO/TS 15011-5:2006. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials
BS ISO 1431-1:2004 BS ISO 1431-1:2004. Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
ISO7240-11 : 2005 EDTN1 ISO7240-11 : 2005 EDTN1. ISO7240-11 : 2005 Fire detection and alarm systems -. Part 11: Manual call points
ISO7240-6 : 2004 EDTN1 ISO7240-6 : 2004 EDTN1. ISO7240-6 : 2004 Fire detection and alarm systems -. Part 6: Carbon monoxide fire detectors using electro-chemical cells
ISO12468-2 : 2005 EDTN 1 ISO12468-2 : 2005 EDTN 1. ISO12468-2 : 2005 External exposure of roofs to fire. Part 2: Classification of roofs
BS ISO 15886-3:2004 BS ISO 15886-3:2004. Agricultural irrigation equipment. Sprinklers. Characterization of distribution and test methods
BS ISO 15886-1:2004 BS ISO 15886-1:2004. Agricultural irrigation equipment. Definition of terms and classification
05/30094854 DC 05/30094854 DC. ISO 3746. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
06/30094836 DC 06/30094836 DC. ISO 3743-1. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering method for small movable sources in reverberant fields. Part 1. Comparison method for a hard-walled test room
BS EN 2702:2005 BS EN 2702:2005. Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D ≤ 200 mm
BS EN 2635:2005 BS EN 2635:2005. Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D ≤ 200 mm with peripheral coarse grain control
BS EN 3347:2005 BS EN 3347:2005. Aerospace series. Aluminim alloy AL-P2024. T8511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 3344:2005 BS EN 3344:2005. Aerospace series. Aluminim alloy AL-P7050. T76511. Extruded bar and section. a or D $3l 150 mm with peripheral coarse grain control
BS EN 3342:2005 BS EN 3342:2005. Aerospace series. Aluminim alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D ≤ 150 mm
BS EN 3338:2005 BS EN 3338:2005. Aerospace series. Aluminim alloy AL-P7050. T74511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 2632:2005 BS EN 2632:2005. Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 61000-6-2:2005 BS EN 61000-6-2:2005. Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
WD/ISO/IEC18056 : 2004 EDTN1 WD/ISO/IEC18056 : 2004 EDTN1. ISO/IEC18056 Information technology - Telecommunications and information exchange between systems - XML Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III
WD/ISO/IEC18051 : 2004 EDTN2 WD/ISO/IEC18051 : 2004 EDTN2. ISO/IEC18051 : 2004 Information technology - Telecommunications and information exchange between systems - Services for Computer Supported Telecommunications Applications (CSTA) Phase III
BS EN 14866:2005 BS EN 14866:2005. Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
BS EN 14863:2005 BS EN 14863:2005. Vitreous and porcelain enamels. Determination of the edge covering of enamelled steel plate to be used in heat exchangers
BS EN 14670:2005 BS EN 14670:2005. Surface active agents. Sodium dodecyl sulfate. Analytical method
BS EN 14669:2005 BS EN 14669:2005. Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method
BS EN ISO 21329:2004 BS EN ISO 21329:2004. Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors
05/30094604 DC 05/30094604 DC. BS 7000-3. Design management systems. Part 3. Managing the design of services. Guide
BS EN 14667:2005 BS EN 14667:2005. Surface active agents. Determination of low boiling solvents in liquid formulations. Gas chromatographic method
BS EN 14666:2005 BS EN 14666:2005. Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic method
BS EN 60317-22:2004 BS EN 60317-22:2004. Specifications for particular types of winding wires. Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
BS EN 60317-18:2004 BS EN 60317-18:2004. Specifications for particular types of winding wires. Polyvinyl acetal enamelled rectangular copper wire, class 120
BS EN 60317-15:2004 BS EN 60317-15:2004. Specifications for particular types of winding wires. Polyesterimide enamelled round aluminium wire, class 180
BS EN 55016-4-2:2004 BS EN 55016-4-2:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainty in EMC measurements
BS EN 14694:2005 BS EN 14694:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of resistance to dynamic water pressure after damage by pre-treatment
BS EN 14692:2005 BS EN 14692:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the resistance to compaction of an asphalt layer
BS EN 14691:2005 BS EN 14691:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning
BS EN 60704-2-5:2005 BS EN 60704-2-5:2005. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric thermal storage room heaters
BS EN 60086-3:2005 BS EN 60086-3:2005. Primary batteries. Watch batteries
EN60086-3 (IEC60086-3 : 2004) AS EN60086-3 (IEC60086-3 : 2004) AS. EN60086-3 : 2005 Primary batteries. Part 3: Watch batteries
BS EN 14705:2005 BS EN 14705:2005. Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers
BS EN 14700:2005 BS EN 14700:2005. Welding consumables. Welding consumables for hard-facing
BS EN ISO 22827-2:2005 BS EN ISO 22827-2:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Moving mechanism
BS EN ISO 22827-1:2005 BS EN ISO 22827-1:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Laser assembly
BS EN 1545-2:2005 BS EN 1545-2:2005. Identification card systems. Surface transport applications. Transport and travel payment related data elements and code lists
BS EN 1545-1:2005 BS EN 1545-1:2005. Identification card systems. Surface transport applications. Elementary data types, general code lists and general data elements
BS EN ISO 3834-4:2005 BS EN ISO 3834-4:2005. Quality requirements for fusion welding of metallic materials. Elementary quality requirements
BS EN ISO 3834-3:2005 BS EN ISO 3834-3:2005. Quality requirements for fusion welding of metallic materials. Standard quality requirements
BS EN ISO 3834-2:2005 BS EN ISO 3834-2:2005. Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements
BS EN ISO 3834-1:2005 BS EN ISO 3834-1:2005. Quality requirements for fusion welding of metallic materials. Criteria for the selection of the appropriate level of quality requirements
BS EN 1998-6:2005 BS EN 1998-6:2005. Eurocode 8. Design of structures for earthquake resistance. Towers, masts and chimneys
BS EN 1998-5:2004 BS EN 1998-5:2004. Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects
BS EN 1998-3:2005 BS EN 1998-3:2005. Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings
BS EN 1998-2:2005 BS EN 1998-2:2005. Eurocode 8. Design of structures for earthquake resistance. Bridges
BS ISO 14064-2:2006 BS ISO 14064-2:2006. Greenhouse gases. Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
BS ISO 14064-1:2006 BS ISO 14064-1:2006. Greenhouse gases. Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
BS EN 1998-1:2004 BS EN 1998-1:2004. Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings
BS EN 13391:2004 BS EN 13391:2004. Mechanical tests for post-tensioning systems
BS EN 60728-11:2005 BS EN 60728-11:2005. Cable networks for television signals, sound signals and interactive services. Safety
BS 8723-2:2005 BS 8723-2:2005. Structured vocabularies for information retrieval. Guide. Thesauri
PD CEN/TR 14613:2003 PD CEN/TR 14613:2003. Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s
DD IEC TS 61804-1:2003 DD IEC TS 61804-1:2003. Function blocks (FB) for process control. Overview of system aspects
BS EN ISO 10139-1:2005 BS EN ISO 10139-1:2005. Dentistry. Soft lining materials for removable dentures. Materials for short-term use
BS ISO 4081:2005 BS ISO 4081:2005. Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
BS EN 60239:2005 BS EN 60239:2005. Graphite electrodes for electric arc furnaces. Dimensions and designation
BS EN 13032-1:2004 BS EN 13032-1:2004. Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Measurement and file format
BS 5871-3:2005 BS 5871-3:2005. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2nd and 3rd family gases)
BS 5871-1:2005 BS 5871-1:2005. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases)
BS EN ISO 9241-110:2006 BS EN ISO 9241-110:2006. Ergonomics of human-system interaction. Dialogue principles
BS EN 60704-3:2006 BS EN 60704-3:2006. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Procedure for determining and verifying declared noise emission values
BS ISO 14461-2:2005 BS ISO 14461-2:2005. Milk and milk products. Quality control in microbiological laboratories. Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
BS ISO 14461-1:2005 BS ISO 14461-1:2005. Milk and milk products. Quality control in microbiological laboratories. Analyst performance assessment for colony counts
BS EN 14873-2:2005 BS EN 14873-2:2005. Storage of furniture and personal effects for private individuals. Provision of the service
BS EN 14873-1:2005 BS EN 14873-1:2005. Furniture removal activities. Storage of furniture and personal effects for private individuals. Specification for storage facility and related storage provision
ISO/IEC21000-10 : 2006 EDTN1 ISO/IEC21000-10 : 2006 EDTN1. ISO/IEC21000-10 : 2006 Information technology - Multimedia framework (MPEG-21). Part 10: Digital item processing
BS EN 61857-1:2005 BS EN 61857-1:2005. Electrical insulation systems. Procedures for thermal evaluation. General requirements. Low-voltage
BS EN 14662-5:2005 BS EN 14662-5:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-4:2005 BS EN 14662-4:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 61285:2004 BS EN 61285:2004. Industrial-process control. Safety of analyser houses
ISO12480-3 : 2005 EDTN1 ISO12480-3 : 2005 EDTN1. ISO12480-3 : 2005 Cranes - Safe use. Part 3: Tower cranes
ISO21128 : 2006 EDTN1 ISO21128 : 2006 EDTN1. ISO21128 : 2006 Cork Stoppers . Determination of oxidizing residues-Iodometric titration method
BS EN 14662-3:2005 BS EN 14662-3:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
BS EN 14662-2:2005 BS EN 14662-2:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-1:2005 BS EN 14662-1:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14678-1:2006 BS EN 14678-1:2006. LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
BS EN 14665:2004 BS EN 14665:2004. Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
BS EN 657:2005 BS EN 657:2005. Thermal spraying. Terminology, classification
BS EN 1274:2004 BS EN 1274:2004. Thermal spraying. Powders. Composition, technical supply conditions
BS 8888:2004 BS 8888:2004. Technical product specification (TPS). Specification
BS EN 60118-7:2005 BS EN 60118-7:2005. Electroacoustics. Hearing aids. Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
BS ISO 8791-3:2005 BS ISO 8791-3:2005. Paper and board. Determination of roughness/smoothness (air leak methods). Sheffield method
BS ISO 16305:2005 BS ISO 16305:2005. Butter. Determination of firmness
BS ISO 6588-2:2005 BS ISO 6588-2:2005. Paper, board and pulps. Determination of pH of aqueous extracts. Hot extraction
BS ISO 6588-1:2005 BS ISO 6588-1:2005. Paper, board and pulps. Determination of pH of aqueous extracts. Cold extraction
BS ISO 4094:2005 BS ISO 4094:2005. Paper, board and pulps. International calibration of testing apparatus. Nomination and acceptance of standardizing and authorized laboratories
BS ISO 16790:2005 BS ISO 16790:2005. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO 20965:2005 BS ISO 20965:2005. Plastics. Determination of the transient extensional viscosity of polymer melts
BS ISO 17744:2004 BS ISO 17744:2004. Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method
BS ISO 14490-4:2005 BS ISO 14490-4:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for astronomical telescopes
BS EN 1866:2005 BS EN 1866:2005. Mobile fire extinguishers
BS EN ISO 534:2005 BS EN ISO 534:2005. Paper and board. Determination of thickness, density and specific volume
BS EN 1514-2:2005 BS EN 1514-2:2005. Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Spiral wound gaskets for use with steel flanges
BS EN ISO 9000:2005 BS EN ISO 9000:2005. Quality management systems. Fundamentals and vocabulary
DD CEN/TS 14993:2005 DD CEN/TS 14993:2005. Swap bodies for combined transport. Stackable swap bodies type A 1371.Di mensions, design requirements and testing
BS EN 12641-1:2005 BS EN 12641-1:2005. Swap bodies and commercial vehicles. Tarpaulins. Minimum requirements
BS ISO 10368:2006 BS ISO 10368:2006. Freight thermal containers. Remote condition monitoring
BS EN ISO 18777:2005 BS EN ISO 18777:2005. Transportable liquid oxygen systems for medical use. Particular requirements
BS ISO/IEC 9798-6:2005 BS ISO/IEC 9798-6:2005. Information technology. Security techniques. Entity authentication. Mechanisms using manual data transfer
BS ISO 18669-2:2004 BS ISO 18669-2:2004. Internal combustion engines. Pistons pins. Inspection measuring principles
BS ISO 18669-1:2004 BS ISO 18669-1:2004. Internal combustion engines. Pistons pins. General specifications
BS EN 14663:2005 BS EN 14663:2005. Foodstuffs. Determination of vitamin B6 (including its glycosylated forms) by HPLC
BS ISO 16740:2005 BS ISO 16740:2005. Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
BS EN 14675:2006 BS EN 14675:2006. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (phase 2, step 1)
BS ISO 15648:2004 BS ISO 15648:2004. Butter. Determination of salt content. Potentiometric method
BS ISO 5738:2004 BS ISO 5738:2004. Milk and milk products. Determination of copper content. Photometric method. (Reference method)
BS EN 15137:2006 BS EN 15137:2006. Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of NOGE and its hydroxy and chlorinated derivatives
BS EN 15136:2006 BS EN 15136:2006. Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants
BS EN 61162-402:2005 BS EN 61162-402:2005. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnections. Documentation and test requirements
BS EN ISO 3815-2:2005 BS EN ISO 3815-2:2005. Zinc and zinc alloys. Analysis by inductively coupled plasma optical emission spectrometry
BS EN ISO 3815-1:2005 BS EN ISO 3815-1:2005. Zinc and zinc alloys. Analysis of solid samples by optical emission spectrometry
BS EN 12441-10:2004 BS EN 12441-10:2004. Zinc and zinc alloys. Chemical analysis. Determination of chromium and titanium in zinc alloys. Spectrophotometric method
BS EN 12441-9:2004 BS EN 12441-9:2004. Zinc and zinc alloys. Chemical analysis. Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method
BS EN 12441-7:2004 BS EN 12441-7:2004. Zinc and zinc alloys. Chemical analysis. Determination of tin. Flame atomic absorption spectrometric method after extraction
BS EN 14658:2005 BS EN 14658:2005. Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining
ISO19004 : 2004 EDTN 1 ISO19004 : 2004 EDTN 1. ISO19004 : 2004 Rubber and rubber products . Evaluation of the sensitivity of test methods
05/30093062 DC 05/30093062 DC. prEN 15269-2. Extended application of test results for doorsets and shutter assemblies. For doors and shutters. Part 2. Steel hinged and pivoted doorsets
BS EN ISO 19901-1:2005 BS EN ISO 19901-1:2005. Petroleum and natural gas industries. Specific requirements for offshore structures. Metocean design and operating considerations
BS EN 1991-1-6:2005 BS EN 1991-1-6:2005. Eurocode 1. Actions on structures. General actions. Actions during execution
BS ISO 10005:2005 BS ISO 10005:2005. Quality management systems. Guidelines for quality plans
DD CEN/TS 14425-5:2004 DD CEN/TS 14425-5:2004. Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
BS EN 14606:2004 BS EN 14606:2004. Inland navigation vessels. Studless anchor chain. Accessories
BS EN ISO 19901-2:2004 BS EN ISO 19901-2:2004. Petroleum and natural gas industries. Specific requirements for offshore structures. Seismic design procedures and criteria
BS EN 1067:2005 BS EN 1067:2005. Adhesives. Examination and preparation of samples for testing
BS ISO 19860:2005 BS ISO 19860:2005. Gas turbines. Data acquisition and trend monitoring system requirements for gas turbine installations
BS ISO 11345:2006 BS ISO 11345:2006. Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods
BS ISO 20806:2004 BS ISO 20806:2004. Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
BS ISO 18437-3:2005 BS ISO 18437-3:2005. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method
BS 7967-3:2005 BS 7967-3:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for responding to measurements obtained from electronic portable combustion gas analysers
BS 7967-2:2005 BS 7967-2:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for using electronic portable combustion gas analysers in the measurement of carbon monoxide and the determination of combustion performance
BS 7967-1:2005 BS 7967-1:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for identifying and managing sources of fumes, smells, spillage/leakage of combustion products and carbon monoxide detector activation
04/30092689 DC 04/30092689 DC. ISO 22088-5. Plastics. Determination of resistance to environmental stress cracking (ESC). Part 5. Constant tensile deformation method
BS EN 10107:2005 BS EN 10107:2005. Grain-oriented electrical steel sheet and strip delivered in the fully processed state
BS ISO 18437-2:2005 BS ISO 18437-2:2005. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Resonance method
BS EN 14653-2:2005 BS EN 14653-2:2005. Manually operated hydraulic shoring systems for groundwork support. Assessment by calculation or test
BS EN 14653-1:2005 BS EN 14653-1:2005. Manually operated hydraulic shoring systems for groundwork support. Product specifications
BS EN 62271-108:2006 BS EN 62271-108:2006. High-voltage switchgear and controlgear. High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
BS ISO 21368:2005 BS ISO 21368:2005. Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
BS ISO 13894-2:2005 BS ISO 13894-2:2005. High-pressure decorative laminates. Composite elements. Specifications for composite elements with wood-based substrates for interior use
BS EN 14639:2005 BS EN 14639:2005. Crude tar and crude benzole. Characteristics and test methods
PD 6678:2005 PD 6678:2005. Guide to the specification of masonry mortar
BS ISO 2976:2005 BS ISO 2976:2005. Coated abrasives. Abrasive belts. Selection of width/length combinations
BS ISO 5429:2005 BS ISO 5429:2005. Coated abrasives. Flap wheels with incorporated flanges or separate flanges
BS EN 14650:2005 BS EN 14650:2005. Precast concrete products. General rules for factory production control of metallic fibered concrete
BS EN 14649:2005 BS EN 14649:2005. Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test)
BS ISO 3919:2005 BS ISO 3919:2005. Coated abrasives. Flap wheels with shaft
BS ISO 15864:2004 BS ISO 15864:2004. Space systems. General test methods for space craft, subsystems and units
BS ISO 9136-1:2004 BS ISO 9136-1:2004. Abrasive grains. Determination of bulk density. Macrogrits
BS ISO 17733:2004 BS ISO 17733:2004. Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry
BS ISO 6106:2005 BS ISO 6106:2005. Abrasive products. Checking the grit size of superabrasives
BS ISO 22917:2004 BS ISO 22917:2004. Superabrasives. Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride
BS EN ISO 8996:2004 BS EN ISO 8996:2004. Ergonomics of the thermal environment. Determination of metabolic rate
BS EN 13481-8:2006 BS EN 13481-8:2006. Railway applications. Track. Performance requirements for fastening systems. Fastening systems for track with heavy axle loads
BSISO12640-2 : 2004 BSISO12640-2 : 2004 . BSISO12640-2 : 2004 Graphic technology . Prepress digital data exchange . . Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID)
BS ISO 14243-3:2004 BS ISO 14243-3:2004. Implants for surgery. Wear of total knee-joint prostheses. Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
PD IEC/TR 60479-4:2004 PD IEC/TR 60479-4:2004. Effects of current on human beings and livestock. Effects of lightning strokes on human beings and livestock
BS EN 60384-8-1:2005 BS EN 60384-8-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level EZ
BS EN 60384-9:2005 BS EN 60384-9:2005. Fixed capacitors for use in electronic equipment. Sectional specification: fixed capacitors of ceramic dielectric, class 2
BS EN 60384-8:2005 BS EN 60384-8:2005. Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
BS EN 60384-9-1:2005 BS EN 60384-9-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, Class 2. Assessment level EZ
06/30092082 DC 06/30092082 DC. ISO 16293-1. Glass in building. Basic soda lime silicated glass products. Part 1. Definitions and general physical and mechanical properties
DD CLC/TS 62367:2005 DD CLC/TS 62367:2005. Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: digital subscriber line)
BS EN 88528-11:2004 BS EN 88528-11:2004. Reciprocating internal combustion engine driven alternating current generating sets. Rotary uninterruptible power systems. Performance requirements and test methods
ISO/IEC15938-9 : 2005 EDTN1 ISO/IEC15938-9 : 2005 EDTN1. ISO/IEC15938-9 : 2005 Information technology - Multimedia content description interface . Part 9 : Profiles and Levels
BS EN ISO 8502-2:2005 BS EN ISO 8502-2:2005. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces
BS ISO 16412:2005 BS ISO 16412:2005. Air cargo equipment. Air cargo pallets. Utilization guidelines
BS EN 61094-6:2005 BS EN 61094-6:2005. Measurement microphones. Electrostatic actuators for determination of frequency response
BS ISO 9912-1:2004 BS ISO 9912-1:2004. Agricultural irrigation equipment. Filters for micro-irrigation. Terms, definitions and classification
BS EN ISO 13000-2:2005 BS EN ISO 13000-2:2005. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Preparation of test specimens and determination of properties
BS EN ISO 13000-1:2005 BS EN ISO 13000-1:2005. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation
BS ISO 22498:2005 BS ISO 22498:2005. Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving
BS ISO 6415:2005 BS ISO 6415:2005. Internal combustion engines. Spin-on filters for lubricating oil. Dimensions
ISO/IEC14496-5 AMD5(11/04)CD-ROM ISO/IEC14496-5 AMD5(11/04)CD-ROM. ISO/IEC14496-5 : 2001 Information technology - Coding of audio-visual objects -. Part 5: Reference software
BS ISO 16152:2005 BS ISO 16152:2005. Plastics. Determination of xylene-soluble matter in polypropylene
BS EN 62252:2004 BS EN 62252:2004. Maritime navigation and radiocommunication equipment and systems. Radar for craft not in compliance with IMO SOLAS Chapter V. Performance requirements methods of test and required test results
BS ISO 17373:2005 BS ISO 17373:2005. Road vehicles. Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
BS EN 50407-1:2004 BS EN 50407-1:2004. Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor cables
BS EN 50406-2:2004 BS EN 50406-2:2004. End user multi-pair cables used in high bit rate telecommunication networks. Duct and buried cables
BS EN 14573:2004 BS EN 14573:2004. Foodstuffs. Determination of 3-monochloropropane-1,2-diol by GC/MS
BS EN ISO 4167:2006 BS EN ISO 4167:2006. Polyolefin agricultural twines
BS EN 14640:2005 BS EN 14640:2005. Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
BS EN ISO 483:2005 BS EN ISO 483:2005. Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value
ISO15442 : 2005 EDTN1 ISO15442 : 2005 EDTN1. ISO15442 : 2005 Cranes. Safety requirements for loader cranes
BS EN 14772:2005 BS EN 14772:2005. Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
BS EN ISO 1969:2004 BS EN ISO 1969:2004. Fibre ropes. Polyethylene. 3- and 4-strand ropes
BS 6810-2:2005 BS 6810-2:2005. Determination of metals in textiles. Analysis by atomic emission spectroscopy
BS 4060:2006 BS 4060:2006. Pressed wool felts. Specification
BS 2471:2005 BS 2471:2005. Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
BS ISO 15740:2005 BS ISO 15740:2005. Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices
WD/ISO/IEC17341 : 2005 EDTN2 WD/ISO/IEC17341 : 2005 EDTN2. ISO/IEC17341 : 2005 Information technology -- Data interchange on 120 mm and 80 mm optical disk using +RW format -- Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4X)
BS 7540-3:2005 BS 7540-3:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22
BS 7540-2:2005 BS 7540-2:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22
BS EN 61850-10:2005 BS EN 61850-10:2005. Communication networks and systems in substations. Conformance testing
BS EN 1765:2004 BS EN 1765:2004. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS EN ISO 11111-7:2005 BS EN ISO 11111-7:2005. Textile machinery. Safety requirements. Dyeing and finishing machinery
BS EN ISO 11111-6:2005 BS EN ISO 11111-6:2005. Textile machinery. Safety requirements. Fabric manufacturing machinery
BS EN ISO 11111-5:2005 BS EN ISO 11111-5:2005. Textile machinery. Safety requirements. Preparatory machinery to weaving and knitting
BS EN ISO 11111-4:2005 BS EN ISO 11111-4:2005. Textile machinery. Safety requirements. Yarn processing, cordage and rope manufacturing machinery
BS EN ISO 11111-3:2005 BS EN ISO 11111-3:2005. Textile machinery. Safety requirements. Nonwoven machinery
BS EN ISO 11111-2:2005 BS EN ISO 11111-2:2005. Textile machinery. Safety requirements. Spinning preparatory and spinning machines
BS EN ISO 11111-1:2005 BS EN ISO 11111-1:2005. Textile machinery. Safety requirements. Common requirements
BS EN ISO 10821:2005 BS EN ISO 10821:2005. Industrial sewing machines. Safety requirements for sewing machines, units and systems
BS ISO 8640-2:2004 BS ISO 8640-2:2004. Textile machinery and accessories. Flat warp knitting machines. Vocabulary of warp let-off, fabric take-up and batching
BS ISO 8640-1:2004 BS ISO 8640-1:2004. Textile machinery and accessories. Flat warp knitting machines. Vocabulary of basic structure and knitting elements
BS EN 14623:2005 BS EN 14623:2005. Devices to prevent pollution by backflow of potable water. Air gaps with minimum circular overflow (verified by test or measurement). Family A, type G
BS EN 14622:2005 BS EN 14622:2005. Devices to prevent pollution by backflow of potable water. Air gap with circular overflow (restricted). Family A, type F
BS ISO 16121-4:2005 BS ISO 16121-4:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Cabin environment
BS ISO 16121-3:2005 BS ISO 16121-3:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Information devices and controls
BS ISO 16121-2:2005 BS ISO 16121-2:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Visbility
BS ISO 16121-1:2005 BS ISO 16121-1:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. General description, basic requirements
BS EN 13336:2004 BS EN 13336:2004. Leather. Upholstery leather characteristics. Guide for selection of leather for furniture
BS EN 1273:2005 BS EN 1273:2005. Child use and care articles. Baby walking frames. Safety requirements and test methods
BS EN 60335-2-76:2005 BS EN 60335-2-76:2005. Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
BS ISO 21870:2005 BS ISO 21870:2005. Rubber compounding ingredients. Carbon black. Determination of high-temperature loss on heating by thermogravimetry
BS ISO 21869:2006 BS ISO 21869:2006. Rubber compounding ingredients. Magnesium oxide. Methods of test
BS ISO 2108:2005 BS ISO 2108:2005. Information and documentation. International standard book number (ISBN)
BS EN 61338-1:2005 BS EN 61338-1:2005. Waveguide type dielectric resonators. Generic specification
BS EN 61337-1:2004 BS EN 61337-1:2004. Filters using waveguide type dielectric resonators. Generic specification
BS ISO 4138:2004 BS ISO 4138:2004. Passenger cars. Steady-state circular driving behaviour. Open-loop test methods
BS EN 62008:2005 BS EN 62008:2005. Performance characteristics and caliberation for digital data acquisition systems and relevant software
BS ISO 23079:2005 BS ISO 23079:2005. Magnesium and magnesium alloys. Returns. Requirements, classification and acceptance
BS EN ISO 8325:2004 BS EN ISO 8325:2004. Dentistry. Test methods for rotary instruments
BS ISO 14839-2:2004 BS ISO 14839-2:2004. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Evaluation of vibration
BS EN 14619:2005 BS EN 14619:2005. Roller sports equipment. Kick scooters. Safety requirements and test methods
BS EN ISO 12737:2005 BS EN ISO 12737:2005. Metallic materials. Determination of plane-strain fracture toughness
BS ISO 18329:2004 BS ISO 18329:2004. Milk and milk products. Determination of furosine content. Ion-pair reverse-phase high-performance liquid chromatography method
BS ISO 2017-1:2005 BS ISO 2017-1:2005. Mechanical vibration and shock. Resilient mounting systems. Technical information to be exchanged for the application of isolation systems
BS EN 1469:2004 BS EN 1469:2004. Natural stone products. Slabs for cladding. Requirements
BS EN 12058:2004 BS EN 12058:2004. Natural stone products. Slabs for floors and stairs. Requirements
BS EN 12057:2004 BS EN 12057:2004. Natural stone products. Modular tiles. Requirements
ISO13408-4 : 2005 EDTN1 ISO13408-4 : 2005 EDTN1. ISO13408-4 : 2005 Aseptic processing of health care products. Part 4 : Clean-in-place technologies
ISO20179 : 2005 EDTN1 ISO20179 : 2005 EDTN1. ISO20179 : 2005 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
BS 6576:2005 BS 6576:2005. Code of practice for diagnosis of rising damp in walls of buildings and installation of chemical damp-proof courses
BS EN 14627:2005 BS EN 14627:2005. Foodstuffs. Determination of trace elements. Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion
BS EN 13796-2:2005 BS EN 13796-2:2005. Safety requirements for cableway installations designed to carry persons. Carriers. Slipping resistance tests for grips
BS EN 12255-16:2005 BS EN 12255-16:2005. Wastewater treatment plants. Physical (mechanical) filtration
06/30090268 DC 06/30090268 DC. ISO 21489. Fire tests. Method of measurement of gases using fourier transform infrared spectroscopy (FTIR) in cumulative smoke test
BS EN 13186:2004 BS EN 13186:2004. Feather and down. Specification feather and down filled bedding articles
BS EN 62345:2005 BS EN 62345:2005. ID format for 50 mm magneto-optical disc system
BS EN 61603-7:2003 BS EN 61603-7:2003. Transmission systems for audio and/or video and related signals using infra-red radiation. Digital audio signals for conference and similar applications
BS EN 60774-5:2004 BS EN 60774-5:2004. Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. D-VHS
PD 6686:2006 PD 6686:2006. Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
BS EN 12902:2004 BS EN 12902:2004. Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test
BS EN 891:2004 BS EN 891:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) chloride sulfate
BS EN 890:2004 BS EN 890:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate liquid
BS EN 889:2004 BS EN 889:2004. Chemicals used for treatment of water intended for human consumption. Iron (II) sulfate
BS EN 888:2004 BS EN 888:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) chloride
BS EN 883:2004 BS EN 883:2004. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate
BS EN 882:2004 BS EN 882:2004. Chemicals used for treatment of water intended for human consumption. Sodium aluminate
BS EN 881:2004 BS EN 881:2004. Chemicals used for treatment of water intended for human consumption. Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric)
BS EN 14616:2004 BS EN 14616:2004. Thermal spraying. Recommendations for thermal spraying
BS EN 614-1:2006 BS EN 614-1:2006. Safety of machinery. Ergonomic design principles. Terminology and general principles
BS EN ISO 2505:2005 BS EN ISO 2505:2005. Thermoplastics pipes. Longitudinal reversion. Test methods and parameters
BS EN 14628:2005 BS EN 14628:2005. Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods
BS ISO 16587:2004 BS ISO 16587:2004. Mechanical vibration and shock. Performance parameters for condition monitoring of structures
BS 2975-1:2004 BS 2975-1:2004. Sampling and analysis of glass-making sands. Methods for sampling and physical testing of glass-making sands
BS 9251:2005 BS 9251:2005. Sprinkler systems for residential and domestic occupancies. Code of practice
BS EN 14624:2005 BS EN 14624:2005. Performances of mobile leak detectors and of room controllers of halogenated refrigerants
BS EN 61280-4-4:2006 BS EN 61280-4-4:2006. Fibre optic communication subsystem basic test procedures. Cable plants and links. Polarization mode dispersion measurement for installed links
BS EN 14621:2005 BS EN 14621:2005. Textiles. Multifilament yarns. Methods of test for textured or non-textured filament yarns
BS EN 61788-9:2005 BS EN 61788-9:2005. Superconductivity. Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors
BS EN 60836:2005 BS EN 60836:2005. Specifications for unused silicone insulating liquids for electrotechnical purposes
BS EN 61804-2:2004 BS EN 61804-2:2004. Function blocks (FB) for process control. Specification of FB concept and electronic device description language (EDDL)
BS EN 61241-18:2004 BS EN 61241-18:2004. Electrical apparatus for use in the presence of combustible dust. Protection by encapsulation 'mD'
BS EN 62271-110:2005 BS EN 62271-110:2005. High-voltage switchgear and controlgear. Inductive load switching
BS EN 71-10:2005 BS EN 71-10:2005. Safety of toys. Organic chemical compounds. Sample preparation and extraction
BS EN 60974-11:2004 BS EN 60974-11:2004. Arc welding equipment. Electrode holders
BS EN 60645-5:2005 BS EN 60645-5:2005. Electroacoustics. Audiometric equipment. Instruments for the measurement of aural acoustic impedance/admittance
BS EN 62297-1:2005 BS EN 62297-1:2005. Triggering messages for broadcast applications. Format
BS EN 62297-2:2005 BS EN 62297-2:2005. Triggering messages for broadcast applications. Transport methods
BS EN 62298-1:2005 BS EN 62298-1:2005. Teleweb application. General description
BS EN 62298-2:2005 BS EN 62298-2:2005. Teleweb application. Delivery methods
BS EN 62298-3:2005 BS EN 62298-3:2005. Teleweb application. Superteletext profile
BS EN 62356-1:2004 BS EN 62356-1:2004. Video recording. 12,65 mm TYPE D-11 format. Tape recording
BS EN 62356-2:2004 BS EN 62356-2:2004. Video recording. 12,65 mm type D-11 format. Picture compression and data stream
BS EN 62356-3:2004 BS EN 62356-3:2004. Video recording. 12,65 mm type D-11 format. Data mapping over SDTI
ISO10303-227 : 2005 CD-ROM EDTN2 ISO10303-227 : 2005 CD-ROM EDTN2. ISO10303-227 : 2005 Industrial automation systems and integration. Product data representation and exchange. Part 227. Application protocol. Plant spatial configuration
BS 8430:2005 BS 8430:2005. Terminology work. Fundamentals made simple
BS 5656-2:2004 BS 5656-2:2004. Escalator and moving walks. Safety rules for the construction and installation of escalators and moving walks. Code of practice for the selection, installation and location of new escalators and moving walks
BS EN ISO 20864:2004 BS EN ISO 20864:2004. Footwear. Test method for stiffeners and toepuffs. Mechanical characteristics
BS EN ISO 20863:2004 BS EN ISO 20863:2004. Footwear. Test method for stiffeners and toepuffs. Bondability
BS 8446:2005 BS 8446:2005. Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances
BS ISO 19318:2004 BS ISO 19318:2004. Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of methods used for charge control and charge correction
BS ISO 18118:2004 BS ISO 18118:2004. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 7768:2006 BS ISO 7768:2006. Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
BS ISO 7769:2006 BS ISO 7769:2006. Textiles. Test method for assessing the appearance of creases in fabrics after cleansing
BS EN 9121:2005 BS EN 9121:2005. Aerospace series. Quality management systems. Assessment applicable to stockist distributors
BS EN 60439-4:2004 BS EN 60439-4:2004. Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
BS EN ISO 8496:2004 BS EN ISO 8496:2004. Metallic materials. Tube. Ring tensile test
WD/ERROR WD/ERROR. BSEN16241 : 2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe fittin products (PENT)
BS ISO 7612:2006 BS ISO 7612:2006. Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
BS EN 14605:2005 BS EN 14605:2005. Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (type 3) or spray-tight (type 4) connections, including items providing protection to parts of the body only (types PB [3] and PB [4])
BS EN 60086-5:2005 BS EN 60086-5:2005. Primary batteries. Safety of batteries with aqueous electrolyte
BS EN ISO 23953-2:2005 BS EN ISO 23953-2:2005. Refrigerated display cabinets. Classification, requirements and test conditions
BS EN ISO 23953-1:2005 BS EN ISO 23953-1:2005. Refrigerated display cabinets. Vocabulary
BS EN ISO 10424-1:2004 BS EN ISO 10424-1:2004. Petroleum and natural gas industries. Rotary drilling equipment. Rotary drill stem elements
BS EN 14607-8:2004 BS EN 14607-8:2004. Space engineering. Mechanical. Materials
BS EN 14607-7:2004 BS EN 14607-7:2004. Space engineering. Mechanical. Mechanical parts
BS EN 14607-6:2004 BS EN 14607-6:2004. Space engineering. Mechanical. Pyrotechnics
BS EN 14607-5-1:2004 BS EN 14607-5-1:2004. Space engineering. Mechanical. Liquid and electric propulsion for spacecraft
BS EN 14607-2:2004 BS EN 14607-2:2004. Space engineering. Mechanical. Structural
BS EN 14607-1:2004 BS EN 14607-1:2004. Space engineering. Mechanical. Thermal control
PD 2379:2005 PD 2379:2005. Register of colours of manufacturers' identification threads for electric cables and cords. Tenth Edition
BS ISO 8858-3:2004 BS ISO 8858-3:2004. Hard coal. Froth flotation testing. Release evaluation
BS ISO 14428:2004 BS ISO 14428:2004. Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
BS ISO 20202:2004 BS ISO 20202:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
BS ISO 14427:2004 BS ISO 14427:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of unbaked test specimens and determination of apparent density after compaction
BS ISO 17544:2004 BS ISO 17544:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Determination of rammability of unbaked pastes
BS ISO 15379-2:2004 BS ISO 15379-2:2004. Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration without application of pressure
BS ISO 15379-1:2004 BS ISO 15379-1:2004. Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration with application of pressure
DD CEN/TS 15083-2:2005 DD CEN/TS 15083-2:2005. Durability of wood and wood-based products. Determination of the natural durability of solid wood against wood-destroying fungi, test methods. Soft-rotting micro-fungi
BS EN 62150-2:2004 BS EN 62150-2:2004. Fibre optic active components and devices. Test and measurement procedures. ATM-PON transceivers
PD IEC/TR 62152:2004 PD IEC/TR 62152:2004. Background of terms and definitions of cascaded two-ports
BS EN ISO 4254-1:2005 BS EN ISO 4254-1:2005. Agricultural machinery. Safety. General requirements
BS EN 46-1:2005 BS EN 46-1:2005. Wood preservatives. Determination of the preventive action against Hylotrupes bajalus (Linnaeus). Larvicidial effect (laboratory method)
BS ISO 2790:2004 BS ISO 2790:2004. Belt drives. V-belts for the automotive industry and corresponding pulleys. Dimensions
BS EN 13483:2005 BS EN 13483:2005. Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
BS EN 1360:2005 BS EN 1360:2005. Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
BS 4515-1:2004 BS 4515-1:2004. Specification for welding of steel pipelines on land and offshore. Carbon and carbon manganese steel pipelines
BS EN 55016-1-4:2004 BS EN 55016-1-4:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Radiated disturbances
BS ISO 19959:2005 BS ISO 19959:2005. Visual examination of the surface condition of investment castings. Steel, nickel alloys and cobalt alloys
BS EN 14717:2005 BS EN 14717:2005. Welding and allied processes. Environmental check list
BS ISO 20462-3:2005 BS ISO 20462-3:2005. Photography. Psychophysical experimental methods for estimating image quality. Quality ruler method
BS ISO 20462-1:2005 BS ISO 20462-1:2005. Photography. Psychophysical experimental methods for estimating image quality. Overview of psychophysical elements
BS EN 61837-4:2004 BS EN 61837-4:2004. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Hybrid enclosure outlines
BS EN 14519:2005 BS EN 14519:2005. Solid softwood panelling and cladding. Softwood machined profiles with tongue and groove
BS EN 49-2:2005 BS EN 49-2:2005. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by impregnation (laboratory method)
BS EN 49-1:2005 BS EN 49-1:2005. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by surface treatment (laboratory method)
BS ISO 857-2:2005 BS ISO 857-2:2005. Welding and allied processes. Vocabulary. Soldering and brazing processes and related terms
BS ISO/IEC 18028-4:2005 BS ISO/IEC 18028-4:2005. Information technology. Security techniques. IT network security. Securing remote access
BS ISO/IEC 18028-3:2005 BS ISO/IEC 18028-3:2005. Information technology. Security techniques. IT network security. Securing communications between networks using security gateways
BS ISO 4498:2005 BS ISO 4498:2005. Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
BS ISO/IEC 18028-2:2006 BS ISO/IEC 18028-2:2006. Information technology. Security techniques. IT network security. Network security architecture
06/30088031 DC 06/30088031 DC. ISO 17379-2. Water quality. Determination of selenium. Part 2. Method using hydride generation atomic absorption spectrometry (HG-AAS)
06/30088025 DC 06/30088025 DC. ISO 17378-2. Water quality. Determination of arsenic. Part 2. Method using hydride generation atomic absorption spectrometry (HG-AAS)
ISO22743 : 2006 EDTN1 ISO22743 : 2006 EDTN1. ISO22743 : 2006 Water quality - Determination of sulfates. Method of continuousflow anal ysis (CFA)
BS EN 60704-2-10:2004 BS EN 60704-2-10:2004. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these
BS EN ISO 9864:2005 BS EN ISO 9864:2005. Geosynthetics. Test method for the determination of mass per unit area of geotextiles and geotextile-related products
BS EN ISO 9863-1:2005 BS EN ISO 9863-1:2005. Geosynthetics. Determination of thickness at specified pressures. Single layers
BS EN ISO 9862:2005 BS EN ISO 9862:2005. Geosynthetics. Sampling and preparation of test specimens
BS EN ISO 11733:2004 BS EN ISO 11733:2004. Water quality. Determination of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test
BS EN ISO 6683:2005 BS EN ISO 6683:2005. Earth-moving machinery. Seat belts and seat belt anchorages. Performance requierments and tests
BS EN ISO 3449:2005 BS EN ISO 3449:2005. Earth-moving machinery. Falling object protective structures. Laboratory tests and performance requirements
BIP 0014:2004 BIP 0014:2004. Guide to the evaluation of fieldbus protocols. Selecting the best fieldbus for your application
BS EN 61175:2005 BS EN 61175:2005. Industrial systems, installation and equipment and industrial products. Designation of signals
BS EN 384:2004 BS EN 384:2004. Structural timber. Determination of characteristic values of mechanical properties and density
BS EN 50377-7-4:2004 BS EN 50377-7-4:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50377-7-3:2004 BS EN 50377-7-3:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 50377-7-2:2004 BS EN 50377-7-2:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre
BS EN 60068-2-80:2005 BS EN 60068-2-80:2005. Environmental testing. Tests. Test Fi: Vibration. Mixed mode
BS EN 14597:2005 BS EN 14597:2005. Temperature control devices and temperature limiters for heat generating systems
BS EN 14602:2004 BS EN 14602:2004. Footwear. Test methods for the assessment of ecological criteria
BS EN ISO 10848-1:2006 BS EN ISO 10848-1:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms. Frame document
ISO20727 : 2004 (R08) EDTN1 ISO20727 : 2004 (R08) EDTN1. ISO20767 : 2004 Textile machinery - Mixing bale openers for cotton spinning - Vocabulary principles of construction
ISO20726 : 2004 (R08) EDTN1 ISO20726 : 2004 (R08) EDTN1. ISO20726 : 2004 Textile machinery - Hoppers feeders for cotton spinning - Vocabulary and principles of construction
ISO20725 : 2004 (R08) EDTN1 ISO20725 : 2004 (R08) EDTN1. ISO20725 : 2004 Textile machinery - Condenser for cotton spinning - Vocabulary and principles of construction
BS EN 14601:2005 BS EN 14601:2005. Railway applications. Straight and angled end cocks for brake pipe and main reservoir pipe
BS EN 14697:2005 BS EN 14697:2005. Textiles. Terry towels and terry towel fabrics. Specifications and methods of test
BS EN 14598-3:2005 BS EN 14598-3:2005. Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Specific requirements
BS EN 14598-1:2005 BS EN 14598-1:2005. Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Designation
BS EN 14488-5:2006 BS EN 14488-5:2006. Testing sprayed concrete. Determination of energy absorption capacity of fibre reinforced slab specimens
BS EN 12697-41:2005 BS EN 12697-41:2005. Bituminous mixtures. Test methods for hot mix asphalt. Resistance to de-icing fluids
BS EN 12697-39:2004 BS EN 12697-39:2004. Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition
BS EN ISO 5164:2005, BS 2000-237:2005 BS EN ISO 5164:2005, BS 2000-237:2005. Petroleum products. Determination of knock characteristics of motor fuels. Research method
BS IEC 60747-7-5:2005 BS IEC 60747-7-5:2005. Semiconductor devices. Discrete devices. Bipolar transistors for power switching applications
BS EN 14687:2004 BS EN 14687:2004. Mixed polyolefin fibre ropes
BS EN 14684:2004 BS EN 14684:2004. Polyester fibre ropes. Double braid construction
BS EN 14685:2004 BS EN 14685:2004. Polyamide fibre ropes. Double braid construction
BS EN 14686:2004 BS EN 14686:2004. Fibre ropes of polyester/polyolefin dual fibres
BS EN 60076-11:2004 BS EN 60076-11:2004. Power transformers . Dry-type transformers
BS EN 61249-4-12:2005 BS EN 61249-4-12:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-11:2005 BS EN 61249-4-11:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-5:2005 BS EN 61249-4-5:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability
BS EN 61249-4-2:2005 BS EN 61249-4-2:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Multifunctional expoxide woven E-glass prepeg of defined flammability
BS ISO 24134:2006 BS ISO 24134:2006. Industrial trucks. Additional requirements for automated functions on trucks
BS ISO 3053:2004 BS ISO 3053:2004. Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
BS ISO 22857:2004 BS ISO 22857:2004. Health informatics. Guidelines on data protection to facilitate trans-border flows of personal health information
BS EN ISO 24276:2006 BS EN ISO 24276:2006. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
BS ISO 14133-2:2006 BS ISO 14133-2:2006. Optics and optical instruments. Specifications for binoculars, monoculars and spotting scopes. High performance instruments
BS ISO 14133-1:2006 BS ISO 14133-1:2006. Optics and optical instruments. Specifications for binoculars, monoculars and spotting scopes. General purpose instruments
BS EN 1462:2004 BS EN 1462:2004. Brackets for eaves gutters. Requirements and testing
BS ISO 1126:2006 BS ISO 1126:2006. Rubber compounding ingredients. Carbon black. Determination of loss on heating
BS EN ISO 4797:2004 BS EN ISO 4797:2004. Laboratory glassware. Boiling flasks with conical ground joints
BS ISO 15840:2004 BS ISO 15840:2004. Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
05/30086725 DC 05/30086725 DC. EN 15328. Railway applications. Braking. Brake pads
05/30086722 DC 05/30086722 DC. EN 15329. Railway applications. Braking. Brake block holder and brake shoe key for railway vehicles
DD IEC/TS 62332-1:2005 DD IEC/TS 62332-1:2005. Electrical insulation systems (EIS). Thermal evaluation of combinedliqui d and solid components. General requirements
BS 8723-1:2005 BS 8723-1:2005. Structured vocabularies for information retrieval. Guide. Definitions, symbols and abbreviations
BS ISO 10966:2005 BS ISO 10966:2005. Sports and recreational equipment. Fabrics for awnings and camping tents. Specification
DD ISO/TS 17450-2:2002 DD ISO/TS 17450-2:2002. Geometrical product specifications (GPS). General concepts. Basic tenets, specifications,operators and uncertainties
ISO15952 : 2006 EDTN1 ISO15952 : 2006 EDTN1. ISO15952 : 2006 Soil quality - Effects of pollutants on juvenile land snails (helicidae) - Determination of the effects on growth by soil contamination
ISO23753-2 : 2005 EDTN1 ISO23753-2 : 2005 EDTN1. ISO23753-2 : 2005 Soil quality - Determination of dehydrogenase activity. Part 2: Method using iodotetrazolium chloride
BS ISO 22866:2005 BS ISO 22866:2005. Equipment for crop protection. Methods for field measurement of spray drift
BS ISO 11900-3:2004 BS ISO 11900-3:2004. Tools for pressing. Ball-lock punch retainers. Type E, reduced for heavy duty
ISO8871-5 : 2005 EDTN 1 ISO8871-5 : 2005 EDTN 1. ISO8871-5 : 2005 Elastomeric parts for parenterals and for devices for pharmaceutical use. Part 5: Functional requirements and testing
BS EN 61810-2:2005 BS EN 61810-2:2005. Electromechanical elementary relays. Reliability
BS 1703:2005 BS 1703:2005. Refuse chutes and hoppers. Specification
BS ISO 5667-5:2006 BS ISO 5667-5:2006. Water quality. Sampling. Guidance on sampling of drinking water from treatment works and piped distribution systems
BS EN 14579:2004 BS EN 14579:2004. Natural stone test methods. Determination of sound speed propagation
BS EN 14581:2004 BS EN 14581:2004. Natural stone test methods. Determination of linear thermal expansion coefficient
ISO/IEC15444-9 : 2005 EDTN1 ISO/IEC15444-9 : 2005 EDTN1. ISO/IEC15444-9 : 2005 JPEG 2000 Image coding system. Part 9: Interactivity tools , APIs and protocols
BS EN ISO 21571:2005 BS EN ISO 21571:2005. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Nucleic acid extraction
BS EN ISO 21569:2005 BS EN ISO 21569:2005. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Qualitative nucleic acid based methods
BS 6001-7:2006, ISO 18414:2006 BS 6001-7:2006, ISO 18414:2006. Acceptance sampling procedures for inspection by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality
ISO4118 : 2005 EDTN3 ISO4118 : 2005 EDTN3. ISO4118 : 2005 Air cargo - Non-certified containers for the lower deck of large- capacity aircraft - Specification and testing
BS ISO 14490-7:2005 BS ISO 14490-7:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for limit of resolution
BS ISO 14490-6:2005 BS ISO 14490-6:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for veiling glare index
BS ISO 14490-5:2005 BS ISO 14490-5:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for transmittance
BS ISO 14490-1:2005 BS ISO 14490-1:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for basic characteristics
BS EN 165:2005 BS EN 165:2005. Personal eye-protection. Vocabulary
BS EN ISO 15106-3:2005 BS EN ISO 15106-3:2005. Plastics. Film and sheeting. Determinaktion of water vapour transmission rate. Electrolytic detection sensor method
BS EN 13232-9:2006 BS EN 13232-9:2006. Railway applications. Track. Switches and crossings. Layouts
BS EN 13232-7:2006 BS EN 13232-7:2006. Railway applications. Track. Switches and crossings. Crossings with moveable parts
BS EN ISO 21351:2005 BS EN ISO 21351:2005. Space systems. Functional and technical specifications
BS EN ISO 15106-2:2005 BS EN ISO 15106-2:2005. Plastics. Film and sheeting. Determination of water vapour transmission rate. Infrared detection sensor method
BS EN ISO 15106-1:2005 BS EN ISO 15106-1:2005. Plastics. Film and sheeting. Determination of water vapour transmission rate. Humidity detection sensor method
BS EN 1510:2004 BS EN 1510:2004. Playing field equipment. Tennis equipment. Functional and safety requirements, test methods
BS EN 1509:2004 BS EN 1509:2004. Playing field equipment. Badminton equipment. Functional and safety requirements, test methods
BS EN 957-10:2005 BS EN 957-10:2005. Stationary training equipment. Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods
BS EN ISO 22112:2006 BS EN ISO 22112:2006. Dentistry. Artificial teeth for dental prostheses
DD CEN/TS 14038-1:2004 DD CEN/TS 14038-1:2004. Electrochemical realkalization and chloride extraction treatments for reinforced concrete. Realkalisation
BS EN ISO 15854:2005 BS EN ISO 15854:2005. Dentistry. Casting and baseplate waxes
BS EN 13877-3:2004 BS EN 13877-3:2004. Concrete pavements. Specifications for dowels to be used in concrete pavements
BS EN 13100-2:2004 BS EN 13100-2:2004. Non destrictive testing of welded joints of thermoplastics semi-finished products. X-ray radiographic testing
ISO10355 : 2004 EDTN 2 ISO10355 : 2004 EDTN 2. ISO10355 : 2004 Mopeds - Positioning of lighting and light-signalling devices
BS 8435:2005 BS 8435:2005. Small craft. Reserve flotation. Boats up to six metres length of hull
BS EN 60974-12:2005 BS EN 60974-12:2005. Arc welding equipment. Coupling devices for welding cables
BS EN 61249-2-26:2005 BS EN 61249-2-26:2005. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-23:2005 BS EN 61249-2-23:2005. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
BS ISO 19960:2005 BS ISO 19960:2005. Cast steels and alloys with special physical properties
BS EN ISO 24234:2004 BS EN ISO 24234:2004. Dentistry. Mercury and alloys for dental amalgam
ISO4991 : 2005 EDTN2 ISO4991 : 2005 EDTN2. ISO4991 : 2005 Steel castings for pressure purposes
ISO22478 : 2006 EDTN1 ISO22478 : 2006 EDTN1. ISO22478 : 2006 Water quality - Determination of selected explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection
BS ISO 15517:2003 BS ISO 15517:2003. Tobacco. Determination of nitrate content. Continuous-flow analysis method
BS EN 14585-1:2006 BS EN 14585-1:2006. Corrugated metal hose assemblies for pressure applications. Requirements
PD CEN ISO/TR 15608:2005 PD CEN ISO/TR 15608:2005. Welding. Guidelines for a metallic materials grouping system
BS ISO 21538:2004 BS ISO 21538:2004. Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering
BS ISO 21537-2:2004 BS ISO 21537-2:2004. Clamping flanges for superabrasive cutting-off wheels. Building and construction
BS ISO 21537-1:2004 BS ISO 21537-1:2004. Clamping flanges for superabrasive cutting-off wheels. Natural stone. Natural stone
PD CEN/TR 14568:2003 PD CEN/TR 14568:2003. EN 54. Fire detection and fire alarm systems. Interpretation of specific clauses of EN 54-2:1997
BS EN 14468-2:2005 BS EN 14468-2:2005. Table tennis. Posts for net assemblies. Requirements and test methods
BS EN 14468-1:2004 BS EN 14468-1:2004. Table tennis. Table tennis tables, functional and safety requirements, test methods
BS EN ISO 12402-10:2006 BS EN ISO 12402-10:2006. Personal flotation devices. Selection and application of personal flotation devices and other relevant devices
BS EN 10049:2005 BS EN 10049:2005. Measurement of roughness average. Ra and peak count RPc on metallic flat products
BS EN 14569:2004 BS EN 14569:2004. Foodstuffs. Microbiological screening for irradiated food using LAL/GNB procedures
BS EN 14546:2005 BS EN 14546:2005. Foodstuffs. Determination of trace elements. Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing
BS EN 12098-4:2005 BS EN 12098-4:2005. Controls for heating systems. Optimum start-stop control equipment for electrical systems
ISO11451-2 : 2005 EDTN3 ISO11451-2 : 2005 EDTN3. ISO11451-2 : 2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -. Part 2: Off-vehicle radiation sources
BS EN ISO 1140:2004 BS EN ISO 1140:2004. Fibre ropes. Polyamide. 3-, 4- and 8-strand ropes
BS EN ISO 1181:2004 BS EN ISO 1181:2004. Fibre ropes. Manila and sisal. 3-, 4- and 8-strand ropes
BS EN ISO 1141:2004 BS EN ISO 1141:2004. Fibre ropes. Polyester. 3-, 4- and 8-strand ropes
BS EN ISO 8692:2004, BS 6068-5.10:2004 BS EN ISO 8692:2004, BS 6068-5.10:2004. Water quality. Freshwater algal growth inhibition test with unicellular green algae
BS EN ISO 2307:2005 BS EN ISO 2307:2005. Fibre ropes. Determination of certain physical and mechanical properties
BS EN ISO 9554:2005 BS EN ISO 9554:2005. Fibre ropes. General specifications
BS EN ISO 1346:2004 BS EN ISO 1346:2004. Fibre ropes. Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity (PP3). 3-, 4- & 8- strand ropes
BS EN 14583:2004 BS EN 14583:2004. Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods
BS EN 14576:2005 BS EN 14576:2005. Geosynthetics. Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
BS EN 14575:2005 BS EN 14575:2005. Geosynthetic barriers. Screening test method for determining the resistance to oxidation
BS EN 14574:2004 BS EN 14574:2004. Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics
BS EN 14822-3:2005 BS EN 14822-3:2005. Health informatics. General purpose information components. Clinical
BS EN 14822-2:2005 BS EN 14822-2:2005. Health Informatics. General purpose information components. Non-clinical
BS EN 14822-1:2005 BS EN 14822-1:2005. Health Informatics. General purpose information components. Overview
BS EN ISO 11073-30200:2005 BS EN ISO 11073-30200:2005. Health informatics. Point-of-care medical device communication. Transport profile. Cable connected
BS EN ISO 11073-30300:2005 BS EN ISO 11073-30300:2005. Health informatics. Point-of-care medical device communication. Transport profile. Infrared wireless
BS ISO/IEC 18000-4:2004 BS ISO/IEC 18000-4:2004. Information technology. Radio-frequency identification for item management. Parameters for air interface communications at 2,45 GHz
BS ISO/IEC 18000-3:2004 BS ISO/IEC 18000-3:2004. Information technology. Radio frequency identification for item management. Parameters for air interface communications at 13.56 MHz
BS ISO/IEC 18000-2:2004 BS ISO/IEC 18000-2:2004. Information technology. Radio frequency idenficiation for item management. Parameters for air interface communications below 135 KHz
BS ISO/IEC 18000-1:2004 BS ISO/IEC 18000-1:2004. Information technology. Radio frequency identification for item management. Reference architecture and definition of parameters to be standardized
BS EN 1649:2004 BS EN 1649:2004. AIDC technologies. Operational aspects affecting the reading of bar code symbols
BS EN 13232-6:2005 BS EN 13232-6:2005. Railway applications. Track. Switches and crossings. Fixed common and obtuse crossings
BS EN 13232-5:2005 BS EN 13232-5:2005. Railway applications. Track. Switches and crossings. Switches
BS EN ISO 11073-20101:2005 BS EN ISO 11073-20101:2005. Health informatics. Point-of-care medical device communication. Application profiles. Base standard
BS EN ISO 11073-10201:2005 BS EN ISO 11073-10201:2005. Health informatics. Point-of-care medical device communication. Domain information model


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment