2009/09/07

Cheapest & Latest BSI Standard (PDF) (40)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS ISO 13218:1998 BS ISO 13218:1998. Road vehicles. Child restraint systems. Report form for accidents involving child passengers
BS EN ISO 10535:1998 BS EN ISO 10535:1998. Hoists for the transfer of disabled persons. Requirements and test methods
98/541902DC 98/541902DC. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus incorporating a hood (compressed air escape apparatus with hood). Requirements, testing, marking (prA1. EN 1146:1997)
98/710212DC 98/710212DC. Installation of flues and ventilation for gas appliances of rated input not exceeding 70 kW (1st, 2nd and 3rd family gases). Part 2. Specification for installation of ventilation for gas appliances. PT2.Specification for installation of ventilation for gas appliances
98/262147DC 98/262147DC. CISPR 16-2:1996. New sub-clauses 2.6.4. Measurement of equipment in situ (CISPR/A/233/CD). Methods of measurement of disturbances and immunity
HB 10149:1998 HB 10149:1998. 16th Edition of the Wiring Regulations: Guidance Note 7: Special locations
EP 511 EP 511. BSI Electronic Book. Occupational Health and Safety
BS ISO 15010:1998 BS ISO 15010:1998. Disposable hanging devices for transfusion and infusion bottles. Requirements and test methods
BS ISO/IEC 15773:1998 BS ISO/IEC 15773:1998. Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Transit counter additional network feature
BS ISO/IEC 13871:1995 BS ISO/IEC 13871:1995. Information technology. Telecommunications and information exchange between systems. Private telecommunications networks. Digital channel aggregation
BS ISO/IEC 15802-5:1998 BS ISO/IEC 15802-5:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications. Remote media access control (MAC) bridging
BS EN 2591-323:1998 BS EN 2591-323:1998. Elements of electrical and optical connection. Test methods. Thermal shock
BS EN 2591-324:1998 BS EN 2591-324:1998. Elements of electrical and optical connection. Test methods. Interfacial sealing
BS EN 2591-322:1998 BS EN 2591-322:1998. Elements of electrical and optical connection. Test methods. Hermeticity
BS EN 2591-318:1998 BS EN 2591-318:1998. Elements of electrical and optical connection. Test methods. Fire-resistance
BS EN 2591-317:1998 BS EN 2591-317:1998. Elements of electrical and optical connection. Test methods. Flammability
BS EN 2591-315:1998 BS EN 2591-315:1998. Elements of electrical and optical connection. Test methods. Fluid resistance
BS EN 2591-310:1998 BS EN 2591-310:1998. Elements of electrical and optical connection. Test methods. Cold
BS EN 2591-308:1998 BS EN 2591-308:1998. Elements of electrical and optical connection. Test methods. Sand and dust
BS EN 2591-307:1998 BS EN 2591-307:1998. Elements of electrical and optical connection. Test methods. Salt mist
BS EN 2591-306:1998 BS EN 2591-306:1998. Elements of electrical and optical connection. Test methods. Mould growth
98/202745DC 98/202745DC. IEC 60092-504. Electrical installations in ships. Part 504. Special features. Control and instrumentation (IEC document 18/848/CD). Special features - Control and instrumentation
98/123102DC 98/123102DC. Amendment No. 3 to BS 1970:1984. Rubber hot water bottles
98/123103DC 98/123103DC. Amendment No. 1 to BS 6728:Part 2:1993. Thermoplastics hot water bottles. Part 2. Specification for hot water bottles manufactured from polyolefin materials. Specification for hot water bottles manufactured from PVC compounds
98/123104DC 98/123104DC. Amendment No. 1 to BS 6728:Part 1:1986. Thermoplastics hot water bottles, Part 1. Specification for hot water bottles manufactured from PVC compounds. Specification for hot water bottles manufactured from polyolefin materials
BS EN 2591-210:1998 BS EN 2591-210:1998. Elements of electrical and optical connection. Test methods. Electrical overload
PD 6633:1998, CR 13259:1998 PD 6633:1998, CR 13259:1998. Gas welding equipment. Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes
BS ISO 5270:1998 BS ISO 5270:1998. Pulps. Laboratory sheets. Determination of physical properties
BS EN 12429:1998 BS EN 12429:1998. Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions
BS EN 1646-2:1999 BS EN 1646-2:1999. Leisure accommodation vehicles. Motor caravans. User payloads
BS EN 1645-2:1999 BS EN 1645-2:1999. Leisure accommodation vehicles. Caravans. User payloads
BS EN 721:1999 BS EN 721:1999. Leisure accommodation vehicles. Safety ventilation requirements
BS ISO/IEC 10022:1996 BS ISO/IEC 10022:1996. Information technology. Open systems interconnection. Physical service definition
BS ISO/IEC 8882-1:1996 BS ISO/IEC 8882-1:1996. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testing. General principles
BS ISO/IEC 13642:1996 BS ISO/IEC 13642:1996. Information technology. Elements of management information related to the OSI Physical Layer
BS 2782-5:Method 552A:1999, ISO 4582:1998 BS 2782-5:Method 552A:1999, ISO 4582:1998. Methods of testing plastics. Optical and colour properties, weathering. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS EN ISP 12064-1:1998 BS EN ISP 12064-1:1998. Information technology. International standardized profile FOD112. Open document format: image applications. Simple document structure. Raster graphics content architecture. Document application profile (DAP) (ISO/IEC ISP 12064-1:1995)
BS ISO/IEC TR 11802-2:1997 BS ISO/IEC TR 11802-2:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines. Standard group MAC addresses
BS ISO/IEC 11584:1996 BS ISO/IEC 11584:1996. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Circuit-mode multi-rate bearer services. Service description, functional capabilities and information flows
BS EN ISO 14555:1998 BS EN ISO 14555:1998. Welding. Arc stud welding of metallic materials
BS ISO 12647-3:1998 BS ISO 12647-3:1998. Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Coldset offset lithography and letterpress on newsprint
BS EN ISO 10344:1998, BS 7208-11:1998 BS EN ISO 10344:1998, BS 7208-11:1998. Optics and optical instruments. Contact lenses. Saline solution for contact lens testing
DD ENV 1402-7:1998 DD ENV 1402-7:1998. Unshaped refractory products. Tests for preformed shapes
BS EN 658-1:1998 BS EN 658-1:1998. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of tensile strength
98/654081DC 98/654081DC. ISO/IEC FCD 14496-1. Information technology. Very-low bitrate audio-visual coding. Part 1. Systems. Systems
BS 7755-3.13:1998, ISO 11047:1998 BS 7755-3.13:1998, ISO 11047:1998. Soil quality. Chemical methods. Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil. Flame and electrothermal atomic absorption spectrometric methods
98/708084DC 98/708084DC. Test sieves for cereals. Amendment 1. Additional sizes (ISO 5223:1995/DAM 1)
98/652420DC 98/652420DC. ISO/IEC 9797-1. Information technology. Security techniques. Message authentication codes (MACs). Part 1. Mechanisms using a block cipher. Mechanisms using a block cipher
98/202793DC 98/202793DC. IEC 60927. Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
BS EN ISO 11402:1998 BS EN ISO 11402:1998. Plastics. Condensation resins. Determination of free formaldehyde
BS EN ISO 8989:1998, BS 2782-4:Method 451T:1998 BS EN ISO 8989:1998, BS 2782-4:Method 451T:1998. Plastics. Liquid phenolic resins. Determination of water miscibility
BS EN ISO 8987:1998, BS 2782-8:Methods 835I & J BS EN ISO 8987:1998, BS 2782-8:Methods 835I & J. Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
BS EN ISO 11409:1998 BS EN ISO 11409:1998. Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry
BS EN ISO 11401:1998 BS EN ISO 11401:1998. Plastics. Phenolic resins. Separation by liquid chromatography
BS EN ISO 9338:1998, BS 7208-15:1998 BS EN ISO 9338:1998, BS 7208-15:1998. Optics and optical instruments. Contact lenses. Determination of the diameters
BS EN ISO 14534:1998, BS 7208-17:1998 BS EN ISO 14534:1998, BS 7208-17:1998. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN ISO 9340:1999, BS 7208-9:1999 BS EN ISO 9340:1999, BS 7208-9:1999. Optics and optical instruments. Contact lenses. Determination of strains for rigid contact lenses
BS EN ISO 9341:1998, BS 7208-10:1998 BS EN ISO 9341:1998, BS 7208-10:1998. Optics and optical instruments. Contact lenses. Determination of inclusions and surface imperfections for rigid contact lenses
BS EN ISO 12864:1998 BS EN ISO 12864:1998. Ophthalmic optics. Contact lenses. Determination of scattered light
BS ISO 6344-2:1998 BS ISO 6344-2:1998. Coated abrasives. Grain size analysis. Determination of grain size distribution of macrogrits P12 to P220
BS ISO 14865:1998 BS ISO 14865:1998. Machinery for forestry. Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source. Safety requirements and testing
BS ISO 14740:1998 BS ISO 14740:1998. Forestry machinery. Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances. Safety requirements and testing
BS 1192-5:1998 BS 1192-5:1998. Construction drawing practice. Guide for structuring and exchange of CAD data
BS 7370-5:1998 BS 7370-5:1998. Grounds maintenance. Recommendations for the maintenance of water areas
PD 6636:1998, CR 13033:1997 PD 6636:1998, CR 13033:1997. Personal protective equipment. Lifejackets and buoyancy aids. Guide for selection and use
BS AU 50-1.4.1b:1998, ISO 4251-1:1998 BS AU 50-1.4.1b:1998, ISO 4251-1:1998. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for designation and dimensions for ply rating marked series tyres
98/655985DC 98/655985DC. ISO/IEC 14165-111. Information technology. Fibre channel. Part 111. Physical and signalling interface (FC-PH). Physical and Signaling Interface (FC-PH)
98/123044DC 98/123044DC. Agglomerated cork floor tiles. Determination of dimensions and control of squareness and straightness of edges (ISO/DIS 9366)
98/104723DC 98/104723DC. ISO/DIS 14688. Geotechnics in civil engineering. Identification and classification of soils
BS 7920:1998 BS 7920:1998. Specification for luminance meters
BS EN 60904-10:1998, IEC 60904-10:1998 BS EN 60904-10:1998, IEC 60904-10:1998. Photovoltaic devices. Methods of linearity measurement
BS EN 60904-8:1998, IEC 60904-8:1998 BS EN 60904-8:1998, IEC 60904-8:1998. Photovoltaic devices. Measurement of spectral response of a photovoltaic (PV) device
98/561739DC 98/561739DC. BS 6068. Water quality. Part 5. Biological methods. New section. Determination of long term toxicity of substances to Daphnia magna Straus (ISO/DIS 10706)
BSI Shade chart BSI Shade chart. Methods of measuring the performance of household electrical appliances. Methods of measuring the performance of household electrical appliances. Shade chart for the assessment of browning
BS EN 1981:1998 BS EN 1981:1998. Copper and copper alloys. Master alloys
BS EN 12338:1998 BS EN 12338:1998. Water quality. Determination of mercury. Enrichment methods by amalgamation
BS EN ISO 12224-1:1998 BS EN ISO 12224-1:1998. Solder wire, solid and flux cored. Specification and test methods. Classification and performance requirements
BS EN 61345:1998, IEC 61345:1998 BS EN 61345:1998, IEC 61345:1998. UV test for photovoltaic (PV) modules
BS EN 60904-7:1998, IEC 60904-7:1998 BS EN 60904-7:1998, IEC 60904-7:1998. Photovoltaic devices. Computation of spectral mismatch error introduced in the testing of a photovoltaic device
BS EN 10130:1999 BS EN 10130:1999. Cold-rolled low-carbon steel flat products for cold forming. Technical delivery conditions
BS ISO 14050:1998 BS ISO 14050:1998. Environmental management. Vocabulary
BS ISO 9022-21:1998 BS ISO 9022-21:1998. Optics and optical instruments. Environmental test methods. Combined low pressure and ambient temperature or dry heat
BS ISO 9022-16:1998 BS ISO 9022-16:1998. Optics and optical instruments. Environmental test methods. Combined bounce or steady-state acceleration and dry heat or cold
BS ISO 9022-15:1998 BS ISO 9022-15:1998. Optics and optical instruments. Environmental test methods. Combined digitally controlled broad-band random vibration and dry heat or cold
BS ISO 9022-13:1998 BS ISO 9022-13:1998. Optics and optical instruments. Environmental test methods. Combined shock, bump or free fall and dry heat or cold
BS ISO 9022-3:1998 BS ISO 9022-3:1998. Optics and optical instruments. Environmental test methods. Mechanical stress
BS EN 50107:1998 BS EN 50107:1998. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS ISO TR 5658-1:1997 BS ISO TR 5658-1:1997. Reaction to fire tests. Spread of flame. Guidance on flame spread
BS EN 12655:1998 BS EN 12655:1998. Gymnastic equipment. Hanging rings. Functional and safety requirements, test methods
BS EN 1900:1998 BS EN 1900:1998. Materials and articles in contact with foodstuffs. Non-metallic tableware. Terminology
BS EN ISO 15141-2:1998 BS EN ISO 15141-2:1998. Foodstuffs. Determination of ochratoxin A in cereals and cereal products. High performance liquid chromatographic method with bicarbonate clean up
BS EN ISO 15141-1:1998 BS EN ISO 15141-1:1998. Foodstuffs. Determination of ochratoxin A in cereals and cereal products. High performance liquid chromatographic method with silica gel clean up
98/541667DC 98/541667DC. prEN 13238. Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
98/541656DC 98/541656DC. Protective helmets. Test methods. Part 9. Mechanical rigidity (prEN 13087-9). Part 9: Mechanical rigidity
98/122963DC 98/122963DC. Textile floor coverings. Determination of resistance to staining (ISO/DIS 13750)
98/122962DC 98/122962DC. Textile floor coverings. Determination of size, squareness and straightness of edge tiles (ISO/DIS 13747)
98/122960DC 98/122960DC. Textile floor coverings. Assessment of changes in appearance (ISO/DIS 9405)
98/202493DC 98/202493DC. IEC 61892-5. Mobile and fixed offshore units. Electrical installations. Part 5. Mobile units (IEC document 18/846/CD). Mobile units
BS ISO 15166-1:1998 BS ISO 15166-1:1998. Adhesives. Methods of preparing bulk specimens. Two-part systems
BS ISO TR 12767:1998 BS ISO TR 12767:1998. Measurement of fluid flow by means of pressure-differential devices. Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1
BS EN 61557-6:1998, IEC 61557-6:1997 BS EN 61557-6:1998, IEC 61557-6:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Residual current devices (RCD) in TT, TN and IT systems
BS EN 60143-3:1998, IEC 60143-3:1998 BS EN 60143-3:1998, IEC 60143-3:1998. Series capacitors for power systems. Internal fuses
BS IEC 61314-1-1:1996, IEC 61314-1-1:1996,QC 880001:1996 BS IEC 61314-1-1:1996, IEC 61314-1-1:1996,QC 880001:1996. Fibre optic fan-outs. Blank detail specification. Environmental categories 1, 2, 3, 5 and 99
BS EN 61360-2:1998, IEC 61360-2:1998 BS EN 61360-2:1998, IEC 61360-2:1998. Standard data element types with associated classification scheme for electric components. EXPRESS dictionary schema
BS EN 60794-3:1998, IEC 60794-3:1998 BS EN 60794-3:1998, IEC 60794-3:1998. Optical fibre cables. Duct, buried and aerial cables. Sectional specification
BS 3900-J3:1998, ISO 8130-6:1992 and Amd1:1998 BS 3900-J3:1998, ISO 8130-6:1992 and Amd1:1998. Methods of test for paints. Testing of coating powders. Determination of gel time of coating powders
BS 4553-3:1998 BS 4553-3:1998.
BS 4553-2:1998 BS 4553-2:1998.
BS 4553-1:1998 BS 4553-1:1998.
BS IEC 60874-14-1:1997, QC 910004XX0001:1997 BS IEC 60874-14-1:1997, QC 910004XX0001:1997. Connectors for optical fibres and cables. Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b
BS IEC 60874-10-3:1997, QC 910003XX0003:1997 BS IEC 60874-10-3:1997, QC 910003XX0003:1997. Connectors for optical fibres and cables. Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre
BS EN 61069-6:1998, IEC 61069-6:1998 BS EN 61069-6:1998, IEC 61069-6:1998. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of system operability
BS ISO 8548-4:1998 BS ISO 8548-4:1998. Prosthetics and orthotics. Limb deficiencies. Description of causal conditions leading to amputation
98/261911DC 98/261911DC. IEC 60068-2-28. Edition 4.0. Environmental testing. Part 2-28. Tests. Guidance for damp heat tests (IEC/104/71/CD). Tests. Guidance for damp heat tests
BS ISO 1985:1998 BS ISO 1985:1998. Machine tools. Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table. Testing of the accuracy
98/708827DC 98/708827DC. Aerospace series. Primary active lithium battery. Aircraft use. Technical specification (prEN 4240)
98/654079DC 98/654079DC. ISO/IEC FCD 13818-10. Information technology. Generic coding of moving pictures and associated audio information. Part 10. Conformance extensions for digital storage media command and control (DSM-CC). Conformance extensions for Digital Storage Media Command and Control (DSM-CC)
98/541608DC 98/541608DC. Ergonomic requirements for office work with visual display terminals (VDTs). Part 9. Requirements for non-keyboard input devices (prEN ISO 9241-9). Part 9: Requirements for non-keyboard input devices
BS 684-1.17:1998, ISO 15267:1998 BS 684-1.17:1998, ISO 15267:1998. Methods of analysis of fats and fatty oils. Physical methods. Flashpoint limit test using Pensky-Martens closed-cup flash tester
BS ISO 7278-3:1998, ISO 7278-3:1998 BS ISO 7278-3:1998, ISO 7278-3:1998. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Pulse interpolation techniques
BS EN 153000:1998 BS EN 153000:1998. Harmonized system of quality assessment for electronic components. Generic specification: discrete pressure contact power semiconductor devices (qualification approval)
BS ISO 15:1998 BS ISO 15:1998. Rolling bearings. Radial bearings. Boundary dimensions, general plan
BS Z 11:1998, ISO 15396:1998 BS Z 11:1998, ISO 15396:1998. Space data and information transfer systems. Cross support reference model. Space link extension services
BS EN ISO 10673:1999 BS EN ISO 10673:1999. Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
BS A 326:1998, ISO 3230:1998 BS A 326:1998, ISO 3230:1998. Rivets, solid, 100° normal countersunk head with dome, metallic material, with or without surface treatment. Dimensions
BS A 325:1998, ISO 245:1998 BS A 325:1998, ISO 245:1998. Lockwire. Diameters
BS 2A 294:1998, ISO 7403:1998 BS 2A 294:1998, ISO 7403:1998. Spline drives. Wrenching configuration. Metric series
BS A 327:1998, ISO 13589:1998 BS A 327:1998, ISO 13589:1998. Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/425°C and 1550 MPa (at ambient temperature)/600°C. Dimensions
BS ISO 1122-1:1998 BS ISO 1122-1:1998. Vocabulary of gear terms. Definitions related to geometry
BS ISO 15469:1997 BS ISO 15469:1997. Spatial distribution of daylight. CIE standard overcast sky and clear sky
BS EN ISO 14982:1998 BS EN ISO 14982:1998. Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
BS EN 60601-2-24:1998, BS 5724-2.124:1998,IEC 60601-2-24:1998 BS EN 60601-2-24:1998, BS 5724-2.124:1998,IEC 60601-2-24:1998. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of infusion pumps and controllers
BS CECC 200025:1998 BS CECC 200025:1998. Harmonized system of quality assessment for electronic components. Process assessment schedule: printed board assembly facilities
BS 4001-1:1998 BS 4001-1:1998. Care and maintenance of underwater breathing apparatus. Recommendations for the compressed air open circuit type
BS N 6:1998 BS N 6:1998. Specification for aeromedical portable oxygen concentrator systems. General requirements
BS EN 521:1998 BS EN 521:1998. Specification for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances
BS EN ISO 13736:1998, BS 2000-170:1998 BS EN ISO 13736:1998, BS 2000-170:1998. Petroleum products and other liquids. Determination of flash point. Abel closed cup method
BS EN ISO 6246:1998, BS 2000-131:1998,ISO 6246:1995 BS EN ISO 6246:1998, BS 2000-131:1998,ISO 6246:1995. Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method
BS EN 116:1998, BS 2000-309:1998 BS EN 116:1998, BS 2000-309:1998. Diesel and domestic heating fuels. Determination of cold filter plugging point
BS EN ISO 5165:1998, BS 2000-41:1998,ISO 5165:1998 BS EN ISO 5165:1998, BS 2000-41:1998,ISO 5165:1998. Petroleum products. Determination of the ignition quality of diesel fuels. Cetane engine method
98/202315DC 98/202315DC. IEC 60335-2-11 Ed. 4. Particular requirements for tumble dryers. Amendment to sub-clause 19.102 concerning bare heating elements (IEC Document 61/1459/CD). Particular requirements for tumble dryers
98/122849DC 98/122849DC. ISO/DIS 836. Refractories. Vocabulary
BS EN 1410:1998 BS EN 1410:1998. Chemicals used for treatment of water intended for human consumption. Cationic polyacrylamides
BS EN 1409:1998 BS EN 1409:1998. Chemicals used for treatment of water intended for human consumption. Polyamines
BS EN 1408:1998 BS EN 1408:1998. Chemicals used for treatment of water intended for human consumption. Poly(diallyldimethylammonium chloride)
BS EN 1407:1998 BS EN 1407:1998. Chemicals used for treatment of water intended for human consumption. Anionic and non-ionic polyacrylamides
BS EN 1406:1998 BS EN 1406:1998. Chemicals used for treatment of water intended for human consumption. Modified starches
BS EN 1405:1998 BS EN 1405:1998. Chemicals used for treatment of water intended for human consumption. Sodium alginate
BS EN 1018:1998 BS EN 1018:1998. Chemicals used for treatment of water intended for human consumption. Calcium carbonate
BS EN 1017:1998 BS EN 1017:1998. Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite
BS EN 61400-12:1998, IEC 61400-12:1998 BS EN 61400-12:1998, IEC 61400-12:1998. Wind turbine generator systems. Wind turbine power performance testing
PD 6632:1998, CR 12739:1998 PD 6632:1998, CR 12739:1998. Biotechnology. Laboratories for research, development and analysis. Guidance on the selection of equipment needed for biotechnology laboratories according to the degree of hazard
BS EN 12689:1998 BS EN 12689:1998. Biotechnology. Guidance on assessment of the purity, biological activity and stability of micro-organism based products
BS EN 12687:1998 BS EN 12687:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the genomic modification
BS EN 12686:1998 BS EN 12686:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified micro-organisms, including viruses
BS EN 12685:1998 BS EN 12685:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate release of genetically modified micro-organisms, including viruses
BS EN 12683:1998 BS EN 12683:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the molecular stability of the genomic modification
BS EN 12682:1998 BS EN 12682:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the functional expression of the genomic modification
BS EN 12462:1998 BS EN 12462:1998. Biotechnology. Performance criteria for pumps
BS EN 1254-1:1998 BS EN 1254-1:1998. Copper and copper alloys. Plumbing fittings. Fittings with ends for capillary soldering or capillary brazing to copper tubes
BS EN 1254-5:1998 BS EN 1254-5:1998. Copper and copper alloys. Plumbing fittings. Fittings with short ends for capillary brazing to copper tubes
BS 7925-2:1998 BS 7925-2:1998. Software testing. Software component testing
BS 7925-1:1998 BS 7925-1:1998. Software testing. Vocabulary
BS 7926:1998 BS 7926:1998. Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel
98/541527DC 98/541527DC. Respiratory protective devices. Self-contained closed-circuit breathing apparatus, compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking
98/708732DC 98/708732DC. Aerospace series. Rivets, solid. Test methods (ISO/CD 17057)
BSI Shade gauge BSI Shade gauge. Methods of measuring the performance of household electrical appliances. Methods of measuring the performance of household electrical appliances. Shade gauge for the assessment of browning
BS ISO/IEC 8802-2:1998 BS ISO/IEC 8802-2:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Logical link control
BS IEC 61428:1998 BS IEC 61428:1998. Nuclear instrumentation. Sample containers for gamma-ray spectrometry with Ge-detectors
PD 6631:1998 PD 6631:1998. Technical guide to ISO/IEC 13522-5:1997. Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications (MHEG-5)
BS EN ISO 13090-1:1998 BS EN ISO 13090-1:1998. Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people. Exposure to whole-body mechanical vibration and repeated shock
BS ISO 11415:1997 BS ISO 11415:1997. Tools for pressing. Die sets
BS ISO 8694:1998 BS ISO 8694:1998. Tools for moulding. Shouldered ejector pins
BS ISO 6753-2:1998 BS ISO 6753-2:1998. Tools for pressing and moulding. Machined plates. Machined plates for moulds
BS ISO 6751:1998 BS ISO 6751:1998. Tools for moulding. Ejector pins with cylindrical head
BS EN 3542:1998 BS EN 3542:1998. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
BS EN 3044:1998 BS EN 3044:1998. Installation holes for inserts, screw thread, helical coil, self-locking. Design standard
BS EN 3011:1998 BS EN 3011:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification:1210 MPa (at ambient temperature)/730 °C
BS EN 3010:1998 BS EN 3010:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 3009:1998 BS EN 3009:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification. 1275 MPa (at ambient temperature)/650°C
BS EN 3008:1998 BS EN 3008:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C
BS EN 2945:1998 BS EN 2945:1998. Inserts, screw thread, helical coil, self-locking. Assembly procedure
BS EN 2944:1998 BS EN 2944:1998. Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
BS EN 2942:1998 BS EN 2942:1998. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
BS EN 410:1998 BS EN 410:1998. Glass in building. Determination of luminous and solar characteristics of glazing
BS EN 539-2:1998 BS EN 539-2:1998. Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Test for frost resistance
BS EN 1541:1998 BS EN 1541:1998. Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract
BS EN 920:1998 BS EN 920:1998. Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract
98/541500DC 98/541500DC. Industrial safety helmets
98/122521DC 98/122521DC. ISO/DIS 15877-7. Plastics piping systems for hot and cold water. Chlorinated poly(vinyl chloride) (PVC-C). Part 7. Assessment of conformity. Part 7 : Assessment of conformity
98/122516DC 98/122516DC. ISO/DIS 15876-7. Plastics piping systems for hot and cold water. Polybutylene (PB). Part 7. Assessment of conformity. Part 7 : Assessment of conformity
98/122511DC 98/122511DC. ISO/DIS 15875-7. Plastics piping systems for hot and cold water. Crosslinked polyethylene (PE-X). Part 7. Assessment of conformity. Part 7 : Assessment of conformity
BS EN ISO 6877:1998 BS EN ISO 6877:1998. Dental root-canal obturating points
BS 4363:1998 BS 4363:1998. Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites
BS EN 1742:1998 BS EN 1742:1998. Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 1741:1998 BS EN 1741:1998. Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 1740:1998 BS EN 1740:1998. Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
BS EN 61751:1998, IEC 61751:1998 BS EN 61751:1998, IEC 61751:1998. Laser modules used for telecommunication. Reliability assessment
BS EN 61300-2-41:1998, IEC 61300-2-41:1998 BS EN 61300-2-41:1998, IEC 61300-2-41:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors
BS EN 186170:1998 BS EN 186170:1998. Harmonized system of quality assessment for electronic components. Sectional specification:connector sets for optical fibres and cables. Type RCC
BS EN 61395:1998, IEC 61395:1998 BS EN 61395:1998, IEC 61395:1998. Overhead electrical conductors. Creep test procedures for stranded conductors
BS EN 60454-3-3:1998, IEC 60454-3-3:1998 BS EN 60454-3-3:1998, IEC 60454-3-3:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polyester film tapes with rubber thermoplastic adhesive
BS EN 3917:1998 BS EN 3917:1998. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste
BS EN 3207:1998 BS EN 3207:1998. Rubber compounds. Technical specification
BS EN 3918:1998 BS EN 3918:1998. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape
BS EN 3919:1998 BS EN 3919:1998. Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil
BS EN 3922:1998 BS EN 3922:1998. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil
BS EN 3924:1998 BS EN 3924:1998. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape
BS EN 3928:1998 BS EN 3928:1998. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape
BS EN 3931:1998 BS EN 3931:1998. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape
BS EN 3940:1998 BS EN 3940:1998. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape
BS EN 3944:1998 BS EN 3944:1998. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape
BS EN 3947:1998 BS EN 3947:1998. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil
BS EN 3948:1998 BS EN 3948:1998. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire
BS EN 4105:1998 BS EN 4105:1998. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape
98/122589DC 98/122589DC. BS ISO 8096-3. Rubber- or plastics-coated fabrics for water-resistant clothing. Specification. Part 3. Natural rubber- and synthetic rubber-coated fabrics (ISO/CD 8096-3). Part 3: Natural rubber- and synthetic rubber-coated fabrics
98/122588DC 98/122588DC. BS ISO 7617-3. Plastics-coated fabrics for upholstery. Part 3. Specification for polyurethane-coated woven fabrics (ISO/CD 7617-3). Part 3: Specification for polyurethane-coated woven fabrics
98/122587DC 98/122587DC. Rubber- or plastics-coated fabrics. Determination of resistance to penetration by water (ISO/CD 1420)
BS EN 2644:1998 BS EN 2644:1998. Rod assemblies for flight controls. Technical specification
BS EN 1861:1998 BS EN 1861:1998. Refrigerating systems and heat pumps. System flow diagrams and piping and instrument diagrams. Layout and symbols
BS ISO 12478-1:1998 BS ISO 12478-1:1998. Cranes. Maintenance manual. General
BS ISO 11630:1997 BS ISO 11630:1997. Cranes. Measurement of wheel alignment
BS ISO 11994:1997 BS ISO 11994:1997. Cranes. Availability. Vocabulary
BS ISO 4619:1998 BS ISO 4619:1998. Driers for paints and varnishes
BS ISO 9022-10:1998 BS ISO 9022-10:1998. Optics and optical instruments. Environmental test methods. Combined sinusoidal vibration and dry heat or cold
BS EN 1770:1998 BS EN 1770:1998. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion
BS EN 61300-3-40:1998, IEC 61300-3-40:1998 BS EN 61300-3-40:1998, IEC 61300-3-40:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector
BS EN 61300-3-21:1998, IEC 61300-3-21:1998 BS EN 61300-3-21:1998, IEC 61300-3-21:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Examinations and measurements. Switching time and bounce time
BS ISO 14180:1998 BS ISO 14180:1998. Solid mineral fuels. Guidance on the sampling of coal seams
BS ISO TR 15377:1998 BS ISO TR 15377:1998. Measurement of fluid flow by means of pressure differential devices. Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1
BS ISO TR 3313:1998 BS ISO TR 3313:1998. Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS EN 60875-1-1:1998, IEC 60875-1-1:1996,QC 810001:1996 BS EN 60875-1-1:1998, IEC 60875-1-1:1996,QC 810001:1996. Fibre optic branching devices. Blank detail specification
BS EN 60875-1:1998, IEC 60875-1:1996,QC 810000:1996 BS EN 60875-1:1998, IEC 60875-1:1996,QC 810000:1996. Fibre optic branching devices. Generic specification
98/708298DC 98/708298DC. ISO/DIS 4223-1. Definitions of some terms used in the tyre industry. Part 1. Pneumatic tyres. Pneumatic tyres
98/708312DC 98/708312DC. ISO/DIS 10464. Gas cylinders. Refillable welded steel cylinders for LPG. Periodic requalification
BS EN 45510-6-1:1998 BS EN 45510-6-1:1998. Guide for the procurement of power station equipment. Turbine auxiliaries. Deaerators
BS 6043-2.16:1998, ISO 11412:1998 BS 6043-2.16:1998, ISO 11412:1998. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke
BS ISO 7198:1998 BS ISO 7198:1998. Cardiovascular implants. Tubular vascular prostheses
BS EN 1317-1:1998 BS EN 1317-1:1998. Road restraint systems. Terminology and general criteria for test methods
BS EN 1738:1998 BS EN 1738:1998. Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
BS EN 1737:1998 BS EN 1737:1998. Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 12016:1998 BS EN 12016:1998. Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Immunity
BS EN 12015:1998 BS EN 12015:1998. Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Emission
BS EN 957-7:1999 BS EN 957-7:1999. Stationary training equipment. Rowing machines, additional specific safety requirements and test methods
BS EN 957-8:1998 BS EN 957-8:1998. Stationary training equipment. Steppers, stairclimbers and climbers. Additional specific safety requirements and test methods
BS EN 12346:1999 BS EN 12346:1999. Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods
DD ENV 12014-3:1998 DD ENV 12014-3:1998. Foodstuffs. Determination of nitrate and/or nitrite content. Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite
DD ENV 12014-4:1998 DD ENV 12014-4:1998. Foodstuffs. Determination of nitrate and/or nitrite content. Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products
BS EN 752-6:1998 BS EN 752-6:1998. Drain and sewer systems outside buildings. Pumping installations
BS Z 10:1998, ISO 15395:1998 BS Z 10:1998, ISO 15395:1998. Space data and information transfer systems. Standard formatted data units. Control Authority data structures
BS ISO 13592:1998 BS ISO 13592:1998. Small craft. Backfire flame control for petrol engines
98/122295DC 98/122295DC. Petroleum and liquid petroleum products. Determination of volume, density and mass of the contents of vertical cylindrical tanks by hybrid tank measurement systems (ISO/CD 15169)
98/261629DC 98/261629DC. IEC 60721-4-3. Technical report type 3. Edition 1.0. Classification of environmental conditions. Part 4-3. Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Stationary use at weatherprotected locations (IEC/104/59/CDV). Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Stationary use at weather protected locations
98/541375DC 98/541375DC. Protective helmets. Test methods. Part 8. Electrical properties (prEN 13087-8). Part 8: Electrical properties
98/122471DC 98/122471DC. Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC. ISO/DIS 15033
BS EN 1097-3:1998 BS EN 1097-3:1998. Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids
BS EN ISO 1421:1998 BS EN ISO 1421:1998. Rubber-or plastics-coated fabrics. Determination of tensile strength and elongation at break
98/231051DC 98/231051DC. IEC 61260:1995. Electroacoustics. Octave-band and fractional-octave-bank filters. Electromagnetic and electrostatic compatibility requirements and test procedures (IEC DOCUMENT 29/409/CD). Amendment to introduce EMC requirements
BS ISO 10791-4:1998 BS ISO 10791-4:1998. Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes
BS 7854-4:1998, ISO 10816-4:1998 BS 7854-4:1998, ISO 10816-4:1998. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Gas turbine driven sets excluding aircraft derivatives
BS 7854-3:1998, ISO 10816-3:1998 BS 7854-3:1998, ISO 10816-3:1998. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
BS 4483:1998 BS 4483:1998. Steel fabric for the reinforcement of concrete
BS ISO 8543:1998 BS ISO 8543:1998. Textile floor coverings. Methods for determination of mass
BS ISO/IEC 14478-4:1998 BS ISO/IEC 14478-4:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Modelling, rendering and interaction component
BS ISO/IEC 14478-3:1998 BS ISO/IEC 14478-3:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Multimedia systems services
BS ISO/IEC 14478-2:1998 BS ISO/IEC 14478-2:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Foundation component
BS ISO/IEC 14478-1:1998 BS ISO/IEC 14478-1:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Fundamentals of PREMO
KIT 50 KIT 50. Information security guidance kit
BS 4756:1998 BS 4756:1998. Specification for ready-mixed aluminium priming paints for woodwork
98/202066DC 98/202066DC. IEC 60044-2. Voltage transformers. Measurement of radio interference voltage (R.I.V.). Inductive Voltage transformers
98/202051DC 98/202051DC. IEC 60335-2-14:Ed. 3. Safety of household and similar electrical appliances. Part 2. Particular requirements for kitchen machines (61/1456/CD). Particular requirements for electric kitchen machines
98/202052DC 98/202052DC. IEC 60335-2-8. Ed. 4. Safety of household and similar electrical appliances. Part 2-8. Particular requirements for electric shavers, hair clippers and similar appliances (61/1452/CD). Particular requirements for shavers, hair clippers and similar appliances
BS EN 12308:1998 BS EN 12308:1998. Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping
BS EN ISO 13370:1998 BS EN ISO 13370:1998. Thermal performance of buildings. Heat transfer via the ground. Calculation methods
PD 6630:1998, CR 13217:1998 PD 6630:1998, CR 13217:1998. Nomenclature system for medical devices for the purpose of regulatory data exchange. Rationale
BS EN 12298:1998 BS EN 12298:1998. Biotechnology. Equipment. Guidance on testing procedures for leaktightness
BS EN 12297:1998 BS EN 12297:1998. Biotechnology. Equipment. Guidance on testing procedures for sterilizability
BS EN 12296:1998 BS EN 12296:1998. Biotechnology. Equipment. Guidance on testing procedures for cleanability
BS EN 12128:1998 BS EN 12128:1998. Biotechnology. Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
BS EN 60454-3-7:1998, IEC 60454-3-7:1998 BS EN 60454-3-7:1998, IEC 60454-3-7:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polyimide film tapes with pressure-sensitive adhesive
BS EN 60454-3-6:1998, IEC 60454-3-6:1998 BS EN 60454-3-6:1998, IEC 60454-3-6:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polycarbonate film tapes with acrylic thermoplastic adhesive
BS EN 60454-3-5:1998, IEC 60454-3-5:1998 BS EN 60454-3-5:1998, IEC 60454-3-5:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Cellulosic paper, non-creped, with rubber thermosetting adhesive
BS EN 60454-3-4:1998, IEC 60454-3-4:1998 BS EN 60454-3-4:1998, IEC 60454-3-4:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Cellulosic paper, creped, with rubber thermosetting adhesive
BS EN 60454-3-12:1998, IEC 60454-3-12:1998 BS EN 60454-3-12:1998, IEC 60454-3-12:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polyethylene film tapes with pressure-sensitive adhesive
BS EN 60454-3-11:1998, IEC 60454-3-11:1998 BS EN 60454-3-11:1998, IEC 60454-3-11:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Combination tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive
BS EN 60454-3-9:1998, IEC 60454-3-9:1998 BS EN 60454-3-9:1998, IEC 60454-3-9:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Cellulose acetate woven fabric tapes with rubber thermosetting adhesive
BS EN 60454-3-8:1998, IEC 60454-3-8:1998 BS EN 60454-3-8:1998, IEC 60454-3-8:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Glass fabric with pressure-sensitive adhesive
BS EN ISO 8619:1998, BS 2782-8:Method 835H:1998 BS EN ISO 8619:1998, BS 2782-8:Method 835H:1998. Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate
BS EN ISO 8618:1998, BS 2782-4:Method 451M:1998 BS EN ISO 8618:1998, BS 2782-4:Method 451M:1998. Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter
BS EN 844-11:1998 BS EN 844-11:1998. Round and sawn timber. Terminology. Terms relating to degrade by insects
BS EN 844-10:1998 BS EN 844-10:1998. Round and sawn timber. Terminology. Terms relating to stain and fungal attack
BS EN 1923:1998 BS EN 1923:1998. European character repertoires and their coding. 8-bit single-byte coding
BS ISO 11800:1998 BS ISO 11800:1998. Information and documentation. Requirements for binding materials and methods used in the manufacture of books
BSISO12640 : 1997 (R03) BSISO12640 : 1997 (R03).
DD ENV 13154-2:1998 DD ENV 13154-2:1998. Data communication for HVAC application field net. Protocols
WD/HB10004 WD/HB10004. Newnes Mechanical Engineer's Pocket Book
98/122154DC 98/122154DC. Technical report ISO/DTR 11856. Textile floor coverings. Test methods for determination of fibre bind
Video "Profiting from the environment" Video "Profiting from the environment".
BS 148:1998 BS 148:1998. Specification for unused and reclaimed mineral insulating oils for transformers and switchgear
BS 5268-3:1998 BS 5268-3:1998. Structural use of timber. Code of practice for trussed rafter roofs
BS EN ISO 11216:1998 BS EN ISO 11216:1998. Modified starch. Determination of content of carboxymethyl groups in carboxymethyl starch
BS EN 12014-7:1998 BS EN 12014-7:1998. Foodstuffs. Determination of nitrate and/or nitrite content. Continuous flow method for the determination of nitrate content of vegetables and vegetable products after cadmium reduction
BS EN 1518:1998 BS EN 1518:1998. Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors
WD/HB10148 WD/HB10148. Commentary on BS 7671:1992,Requirements for Electrical Installations. IEE Wiring Regulations
BS ISO 8566-4:1998 BS ISO 8566-4:1998. Cranes. Cabins. Jib cranes
BS ISO 10972-1:1998 BS ISO 10972-1:1998. Cranes. Requirements for mechanisms. General
BS EN ISO 3651-2:1998 BS EN ISO 3651-2:1998. Determination of resistance to intergranular corrosion of stainless steels. Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid
BS EN ISO 3651-1:1998 BS EN ISO 3651-1:1998. Determination of resistance to intergranular corrosion of stainless steels. Austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
98/122135DC 98/122135DC. Plastics. Determination of physical dimensions of solid plastic specimens (ISO/CD 16012)
98/122128DC 98/122128DC. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48/DAM 1)
98/707307DC 98/707307DC. Aerospace series. Rivets, solid, in titanium alloy. Procurement specification (ISO/CD 12290)
98/707306DC 98/707306DC. Aerospace series. Rivets, solid, in nickel alloy. Procurement specification (ISO/CD 1228)
98/707587DC 98/707587DC. Food processing machinery. Vegetable peelers. Safety and hygiene requirements (prEN 13208)
BS IEC 60050-807:1998 BS IEC 60050-807:1998. International electrotechnical vocabulary. Digital recording of audio and video signals
BS EN 130300:1998 BS EN 130300:1998. Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte
BS 7816-3:1998, IEC 61244-3:1998 BS 7816-3:1998, IEC 61244-3:1998. Determination of long-term radiation ageing in polymers. Procedures for in-service monitoring of low-voltage cable materials
DD ENV 50208-6:1998 DD ENV 50208-6:1998. Data interchange format for simulated and measured data (ISMD)
BS EN 60454-3-2:1998, IEC 60454-3-2:1998 BS EN 60454-3-2:1998, IEC 60454-3-2:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polyester film tapes with rubber thermosetting or acrylic crosslinked adhesives
BS EN ISO 13918:1998 BS EN ISO 13918:1998. Welding. Studs and ceramic ferrules for arc stud welding
BS EN ISO 7944:1998 BS EN ISO 7944:1998. Optics and optical instruments. Reference wavelengths
98/122131DC 98/122131DC. Road vehicles. Labelling of containers for petroleum based and non-petroleum based brake fluid (ISO/CD 3871)
BS 1344-17:1998, ISO 2745:1998 BS 1344-17:1998, ISO 2745:1998. Methods of testing vitreous enamel finishes. Resistance to hot sodium hydroxide solution
BS EN ISO 2286-3:1998 BS EN ISO 2286-3:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Method for determination of thickness
BS EN ISO 2286-2:1998 BS EN ISO 2286-2:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN ISO 2286-1:1998 BS EN ISO 2286-1:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of length, width and net mass
BS EN 61436:1998, IEC 61436:1998 BS EN 61436:1998, IEC 61436:1998. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride rechargeable single cells
BS EN 60646:1999 BS EN 60646:1999. Test methods for crucible induction furnaces
BS EN 60265-1:1998, IEC 60265-1:1998 BS EN 60265-1:1998, IEC 60265-1:1998. Specification for high-voltage switches. Switches for rated voltages above 1 kV and less than 52 kV
BS EN 12576:1998 BS EN 12576:1998. Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
BS EN 12575:1998 BS EN 12575:1998. Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC
BS EN ISO 3452-3:1999 BS EN ISO 3452-3:1999. Non-destructive testing. Penetrant testing. Reference test blocks
98/201767DC 98/201767DC. IEC 60335-2-6, ED. 4. Part 2-6. Particular requirements for cooking ranges, hobs, ovens and similar appliances, subclauses 7, 19 and 22. Particular requirements for cooking ranges, hobs, ovens and similar appliances
98/707273DC 98/707273DC. Ventilation for buildings. Instrumentation requirements for air velocity measurements in ventilated spaces (prEN 13182)
BS 559:1998 BS 559:1998. Specification for design, construction and installation of signs
WD/HB10146 : 1998 WD/HB10146 : 1998. Countdown to 2000. A guide to the legal issues
BS EN ISO 9999:1998 BS EN ISO 9999:1998. Technical aids for disabled persons. Classification
DD ENV 12789:1998 DD ENV 12789:1998. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
DD ENV 12788:1998 DD ENV 12788:1998. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength
DD ENV 1007-5:1998 DD ENV 1007-5:1998. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
BS EN 12278:1998 BS EN 12278:1998. Mountaineering equipment. Pulleys. Safety requirements and test methods
BS EN 12277:1998 BS EN 12277:1998. Mountaineering equipment. Harnesses. Safety requirements and test methods
BS ISO 844:1998 BS ISO 844:1998. Cellular plastics. Compression test for rigid materials. Specification
BS ISO 14848:1998 BS ISO 14848:1998. Plastics. Unsaturated-polyester resins. Determination of reactivity at 130°C
98/706424 DC 98/706424 DC. prEN 81-11. Safety rules for the construction and installation of lifts. Part 11. New lifts in existing buildings
BS EN 1303:1998 BS EN 1303:1998. Building hardware. Cylinders for locks. Requirements and test methods
DD ENV 13106-1:1998 DD ENV 13106-1:1998. Road transport and traffic telematics. Traffic and travel data dictionary. General definitions, entities, attributes
DD ENV 12313-1:1998 DD ENV 12313-1:1998. Traffic and traveller information (TTI). TTI messages via traffic message coding. Coding protocol for Radio data system. Traffic message channel (RDS-TMC) (RDS-TMC using ALERT C) Version 3.0
DD ENV 13093:1998 DD ENV 13093:1998. Public transport. Road vehicles. Driver's console mechanical interface requirements. Minimum display and keypad parameters
BS EN 130202:1998 BS EN 130202:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
BS EN 133101:1998 BS EN 133101:1998. Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required
BS EN 133100:1998 BS EN 133100:1998. Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required
BS EN 130502:1998 BS EN 130502:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. Assessment level EZ
BS EN 130501:1998 BS EN 130501:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. Assessment level E
BS EN 130500:1998 BS EN 130500:1998. Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
DD 239:1998 DD 239:1998. Recommendations for the preservation of timber
BS EN 10139:1998 BS EN 10139:1998. Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions
BS EN 12438:1998 BS EN 12438:1998. Magnesium and magnesium alloys. Magnesium alloys for cast anodes
BS EN 12421:1998 BS EN 12421:1998. Magnesium and magnesium alloys. Unalloyed magnesium
BS EN ISO 2739:1998 BS EN ISO 2739:1998. Sintered metal bushes. Determination of radial crushing strength
BS ISO/IEC 10036:1996 BS ISO/IEC 10036:1996. Information technology. Font information interchange. Procedures for registration of font-related identifiers
BS EN ISO/IEC 11159:1998 BS EN ISO/IEC 11159:1998. Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines
BS EN ISO 3452-4:1999 BS EN ISO 3452-4:1999. Non-destructive testing. Penetrant testing. Equipment
PD 6623:1998 PD 6623:1998. PNO-ISC specification number 007. ISDN user part (ISUP)
BS EN 1330-8:1998 BS EN 1330-8:1998. Non-destructive testing. Terminology. Terms used in leak tightness testing
BS EN 12454:1998 BS EN 12454:1998. Founding. Visual examination of surface discontinuities. Steel sand castings
BS EN 1371-2:1998 BS EN 1371-2:1998. Founding. Liquid penetrant inspection. Investment castings
BS EN 1810:1998 BS EN 1810:1998. Body-piercing post assemblies. Reference test method for determination of nickel content by flame atomic absorption spectrometry
BS 1344-11:1998, ISO 2746:1998 BS 1344-11:1998, ISO 2746:1998. Methods of testing vitreous enamel finishes. High voltage test for enamelled articles for service under highly corrosive conditions
98/706642DC 98/706642DC. Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore). Specifications (prEN 13195)
98/706176DC 98/706176DC. Bolts, mushroom headed, slotted drive, unified thread aluminium alloys (BS 4A 170:1998)
98/645156DC 98/645156DC. ISO/IEC ISP 12067-5/DAM 1. Information technology. International standardized profile RB. Relaying the connection-mode network service. Part 5. Definition of profile RB51.1121, relaying the connection-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access. Amendment 1. Addition of management requirements. Definition of profile RB51.1121, relaying the connection-mode Network Service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access
98/645155DC 98/645155DC. ISO/IEC ISP 12067-4/DAM 1. Information technology. International standardized profile RB. Relaying the connection-mode network service. Part 4. Definition of profile RB51.1111, relaying the connection-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access. Amendment 1. Addition of management requirements. Definition of profile RB51.1111,relaying the connection-mode Network Service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access
98/645154DC 98/645154DC. ISO/IEC ISP 10614-6/DAM 1. Information technology. International standardized profile RC - X.25 protocol relaying. Part 6. Definition of profile RC51.1121, X.25 protocol relaying between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access. Amendment 1. Addition of management requirements. Definition of profile RC51.1121, X.25 protocol relaying between CSMA/CD LANsubnetworks and PSDNs using virtual calls over a digital data circuit
98/645153DC 98/645153DC. ISO/IEC ISP 10614-5/DAM 1. Information technology. International standardized profile RC. X.25 protocol. Part 5. Definition of profile RC51.1111, X.25 protocol relaying between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access. Amendment 1. Addition of management requirements. Definition of profile RC51.1111, X.25 protocol relaying between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access
98/645152DC 98/645152DC. ISO/IEC ISP 10609-15/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 15. Definition of profile TC54, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to an FDDI LAN. Amendment 1. Addition of management requirements. Definition of profile TC54, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to an FDDI LAN
98/645151DC 98/645151DC. ISO/IEC ISP 10609-14/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 14. Definition of profile TC53, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a token ring LAN. Amendment 1. Addition of management requirements. Definition of profile TC53,Provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a Token Ring LAN
98/645150DC 98/645150DC. ISO/IEC ISP 10609-12/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 12. Definition of profile TC51, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a CSMA/CD LAN. Amendment 1. Addition of management requirements. Definition of profile TC51, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a CSMA/CD LAN
98/645149DC 98/645149DC. ISO/IEC ISP 10609-7/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 7. Definition of profiles TD1111/TD1121. Amendment 1. Addition of management requirements. Definition of profiles TD1111/TD1121
98/645148DC 98/645148DC. ISO/IEC ISP 10609-6/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 6. Definition of profiles TC1111/TC1121. Amendment 1. Addition of management requirements. Definition of profiles TC1111/TC1121
98/645147DC 98/645147DC. ISO/IEC ISP 10609-8/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection mode transport service over connection-mode network service. Part 8. Definition of profiles TE1111/TE1121. Amendment 1. Addition of management requirements. Definition of profiles TE1111/TE1121
98/645146DC 98/645146DC. ISO/IEC ISP 10609-5/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service. Part 5. Definition of profiles TB111/TB1121. Amendment 1. Addition of management requirements. Definition profiles TB1111/TB1121
98/561116DC 98/561116DC. Infusion equipment for medical use. Part 3. Aluminium caps for infusion bottles (ISO/DIS 8536-3). Part 3: Aluminium caps for infusion bottles
98/561115DC 98/561115DC. Infusion equipment for medical use. Part 7. Caps made of aluminium-plastics combinations for infusion bottles (ISO/DIS 8536-7). Part 7: Caps made of aluminium-plastics combinations for infusion bottles
98/561114DC 98/561114DC. Caps made of aluminium-plastics combinations for infusion bottles and injection vials. Requirements and test methods (ISO/DIS 10985)
98/121868DC 98/121868DC. Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading (ISO/DIS 6238)
BS EN ISO 105-Z03:1998 BS EN ISO 105-Z03:1998. Textiles. Tests for colour fastness. Intercompatibility of basic dyes for acrylic fibres
BS EN ISO 9241-4:1998 BS EN ISO 9241-4:1998. Ergonomic requirements for office work with visual display terminals (VDTs). Keyboard requirements
BS 1344-9:1998, ISO 2744:1998 BS 1344-9:1998, ISO 2744:1998. Methods of testing vitreous enamel finishes. Determination of resistance to boiling water and water vapour
BS EN ISO 105-Z05:1998 BS EN ISO 105-Z05:1998. Textiles. Tests for colour fastness. Determination of the dusting behaviour of dyes
BS AU 50-1.5.5:1998, ISO 10499-2:1998 BS AU 50-1.5.5:1998, ISO 10499-2:1998. Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for solid tyres (metric series) for pneumatic tyre rims. Load ratings
BS EN 1413:1998 BS EN 1413:1998. Textiles. Determination of pH of aqueous extract
BS ISO 1628-5:1998, BS 2782-7:Method 732E:1998 BS ISO 1628-5:1998, BS 2782-7:Method 732E:1998. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Thermoplastic polyester (TP) homopolymers and copolymers
BS ISO 13741-2:1998 BS ISO 13741-2:1998. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Headspace method
BS ISO 13741-1:1998 BS ISO 13741-1:1998. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Direct liquid injection method
BS 7011-1-1.1:1998, ISO 8036-1:1998 BS 7011-1-1.1:1998, ISO 8036-1:1998. Consumable accessories for light microscopes. Immersion oils. Specification for immersion oils for general use
BS 7012-10.4:1998, ISO 15362:1998 BS 7012-10.4:1998, ISO 15362:1998. Light microscopes. Minimum requirements for stereo microscopes. Information provided to the user
BS 6068-4.12:1998, ISO 11731:1998 BS 6068-4.12:1998, ISO 11731:1998. Water quality. Microbiological methods. Detection and enumeration of Legionella
BS 7755-5.4:1998, ISO 11277:1998 BS 7755-5.4:1998, ISO 11277:1998. Soil quality. Physical methods. Method by sieving and sedimentation
BS EN ISO 14160:1998 BS EN ISO 14160:1998. Sterilization of single-use medical devices incorporating materials of animal origin. Validation and routine control of sterilization by liquid chemical sterilants
DD ENV 1090-1:1998 DD ENV 1090-1:1998. Execution of steel structures. General rules and rules for buildings (together with United Kingdom national application document)
BS ISO 3086:1998 BS ISO 3086:1998. Iron ores. Experimental methods for checking the bias of sampling
BS EN 10228-3:1998 BS EN 10228-3:1998. Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
BS EN 1706:1998 BS EN 1706:1998. Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
BS EN 1911-3:1998 BS EN 1911-3:1998. Stationary source emissions. Manual method of determination of HCI. Absorption solutions analysis and calculation
BS EN 1911-2:1998 BS EN 1911-2:1998. Stationary source emissions. Manual method of determination of HCI. Gaseous compounds absorption
BS EN 1911-1:1998 BS EN 1911-1:1998. Stationary source emissions. Manual method of determination of HCI. Sampling of gases
BS 7251-14:1998, ISO 7207-2:1998 BS 7251-14:1998, ISO 7207-2:1998. Orthopaedic joint prostheses. Components for partial and total knee-joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
BS ISO 14408:1998 BS ISO 14408:1998. Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
BS EN 60601-2-40:1998, BS 5724-2.40:1998,IEC 60601-2-40:1998 BS EN 60601-2-40:1998, BS 5724-2.40:1998,IEC 60601-2-40:1998. Medical electrical equipment. Particular requirements for safety. Specification for electromyographs and evoked response equipment
BS EN ISO 11905-1:1998, BS 6068-2.62:1998 BS EN ISO 11905-1:1998, BS 6068-2.62:1998. Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate
BS EN 61675-3:1998, IEC 61675-3:1998 BS EN 61675-3:1998, IEC 61675-3:1998. Radionuclide imaging devices. Characteristics and test conditions. Gamma camera based wholebody imaging systems
BS EN 60601-2-7:1998, BS 5724-2.7:1998,IEC 60601-2-7:1998 BS EN 60601-2-7:1998, BS 5724-2.7:1998,IEC 60601-2-7:1998. Medical electrical equipment. Particular requirements for safety. Specification for high voltage generators of diagnostic X-ray generators
BS 684-2.47:1998, ISO 15302:1998 BS 684-2.47:1998, ISO 15302:1998. Methods of analysis of fats and fatty oils. Other methods. Determination of benzo[α]pyrene content by reverse-phase high-performance liquid chromatography
BS EN 972:1998 BS EN 972:1998. Tannery machines. Reciprocating roller machines. Safety requirements
BS EN 12347:1998 BS EN 12347:1998. Biotechnology. Performance criteria for steam sterilizers and autoclaves
BS EN 61920:1998, IEC 61920:1998 BS EN 61920:1998, IEC 61920:1998. Infrared transmission systems. Free air applications
BS EN 61883-5:1998, IEC 61883-5:1998 BS EN 61883-5:1998, IEC 61883-5:1998. Consumer audio/video equipment. Digital interface. SDL-DVCR data transmission
BS EN 61883-4:1998, IEC 61883-4:1998 BS EN 61883-4:1998, IEC 61883-4:1998. Consumer audio/video equipment. Digital interface. MPEG2-TS data transmission
BS EN 61883-3:1998, IEC 61883-3:1998 BS EN 61883-3:1998, IEC 61883-3:1998. Consumer audio/video equipment. Digital interface. HD-DVCR data transmission
BS EN 61883-2:1998, IEC 61883-2:1998 BS EN 61883-2:1998, IEC 61883-2:1998. Consumer audio/video equipment. Digital interface. SD-DVCR data transmission
BS EN 61883-1:1998, IEC 61883-1:1998 BS EN 61883-1:1998, IEC 61883-1:1998. Consumer audio/video equipment. Digital interface. General
BS EN 61760-2:1998, IEC 61760-2:1998 BS EN 61760-2:1998, IEC 61760-2:1998. Surface mounting technology. Transportation and storage conditions of surface mounting devices (SMD). Application guide
BS EN 61846:1999, IEC 61846:1998 BS EN 61846:1999, IEC 61846:1998. Ultrasonics. Pressure pulse lithotripters. Characteristics of fields
BS EN 61333:1998, IEC 61333:1996 BS EN 61333:1998, IEC 61333:1996. Marking on U and E ferrite cores
BS EN 61810-5:1999, IEC 61810-5:1998 BS EN 61810-5:1999, IEC 61810-5:1998. Electromechanical non-specified time all-or-nothing relays. Insulation coordination
BS EN 60679-4-1:1998, IEC 60679-4-1:1998 BS EN 60679-4-1:1998, IEC 60679-4-1:1998. Quartz crystal controlled oscillators of assessed quality. Blank detail specification. Capability approval
BS EN 60118-14:1998, IEC 60118-14:1998 BS EN 60118-14:1998, IEC 60118-14:1998. Hearing aids. Specification of a digital interface device
BS EN 60503:1998, IEC 60503:1998 BS EN 60503:1998, IEC 60503:1998. Spools for broadcast videotape recorders (VTRS)
BS EN 60849:1998, IEC 60849:1998 BS EN 60849:1998, IEC 60849:1998. Sound systems for emergency purposes
BS EN 60268-16:1998, BS 6840-16:1998,IEC 60268-16:1998 BS EN 60268-16:1998, BS 6840-16:1998,IEC 60268-16:1998. Sound system equipment. Objective rating of speech intelligibility by speech transmission index
DISC PD 2000-3:1998 DISC PD 2000-3:1998. Understanding the century date change problem
BS 3598:1998 BS 3598:1998. Fissile materials. Criticality safety in handling and processing. Recommendations
DISC PD 3004:1998 DISC PD 3004:1998. Guide to BS 7799 auditing
DISC PD 3003:1998 DISC PD 3003:1998. Are you ready for a BS 7799 audit?
DISC PD 3002:1998 DISC PD 3002:1998. Guide to BS 7799 risk assessment and risk management
DISC PD 3001:1998 DISC PD 3001:1998. Preparing for BS 7799 certification
DISC PD 3000:1998 DISC PD 3000:1998. Information security management: an introduction
BS EN 186270:1998 BS EN 186270:1998. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSH
98/560828DC 98/560828DC. BS EN 45502-2-2. Active implantable medical devices. Part 2-2. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes inplantable defibrillators) (prEN 45502-2-2). Part 2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes inmplantable defibrillators)
98/201414DC 98/201414DC. EN 60034-12:1995. Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz (EN 60034-12:1995/prAA:1998). Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz
BS ISO 69:1998 BS ISO 69:1998. Cinematography. 16 mm motion-picture magnetic film. Cutting and perforating dimensions
BS EN 12083:1998 BS EN 12083:1998. Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing, marking
BS ISO 11599:1997 BS ISO 11599:1997. Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
98/637039DC 98/637039DC. prEN 50098-1. Customer premises cabling for information technology. Part 1. ISDN basic access. Part 1 ISDN basic access
98/540940DC 98/540940DC. ISO/DIS 11393-3. Protective clothing for users of hand-held chain-saws. Part 3. Test methods for footwear. Part 3: Test methods for footwear
BS ISO 11907-3:1998 BS ISO 11907-3:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a travelling furnace
BS ISO 11907-1:1998 BS ISO 11907-1:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Guidance
98/706277DC 98/706277DC. ISO 10231:1997/DAM 1. Motorcycle tyres. Test methods for verifying tyre capabilities. Amendment 1
BS ISO 11907-4:1998 BS ISO 11907-4:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a conical radiant heater
BS 6913-3:1998, ISO 7129:1997 BS 6913-3:1998, ISO 7129:1997. Operation and maintenance of earth-moving machinery. Specification for cutting edges used on tractor-dozers, graders and scrapers. Principal shapes and basic dimensions
BS 5763-13:1998 BS 5763-13:1998. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of Escherichia coli. Colony-count technique at 44°C using membranes
BS 192-2:1998 BS 192-2:1998. Open-ended wrenches. BS and Whitworth
BS 5489-8:1998 BS 5489-8:1998. Road lighting. Code of practice for lighting that may affect the safe use of aerodromes, railways, harbours and navigable inland waterways
WD/98/260973DC WD/98/260973DC. IEC 60684-3-145 to 147. Flexible insulating sleeving. Part 3. Specifications for individual types of sleeving. Sheets 145 to 147. Extruded PTFE sleeving (IEC/15C/964/CDV). Specification for requirements for individual types of sleevings. Extruded PTFE
98/705770DC 98/705770DC. Hydraulic fluid power. Cleanliness of components. Inspection document and methods of sample collection, sample analysis, and data reporting (ISO/CD 10949)
DD ENV 12497:1998 DD ENV 12497:1998. Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract
BS EN ISO 12241:1998 BS EN ISO 12241:1998. Thermal insulation for building equipment and industrial installations. Calculation rules
BS EN 61061-1:1998, IEC 61061-1:1998 BS EN 61061-1:1998, IEC 61061-1:1998. Non-impregnated densified laminated wood for electrical purposes. Definitions, designations and general requirements
BS EN 60674-3-1:1998, IEC 60674-3-1:1998 BS EN 60674-3-1:1998, IEC 60674-3-1:1998. Specification for plastic films for electrical purposes. Specifications for individual materials. Biaxially oriented polypropylene (PP) films for capacitors
DD ENV 13065:1998 DD ENV 13065:1998. Bar coding. Test specifications for bar code masters
DD ENV 13066:1998 DD ENV 13066:1998. Bar coding. Test specifications for bar code production software
BS EN 12403:1998 BS EN 12403:1998. Bar coding. Structured data files
BS EN 1556:1998 BS EN 1556:1998. Bar coding. Terminology
98/121065DC 98/121065DC. Injection-moulded unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-butadiene-acrylester (ASA) fittings. Behaviour to heat. Oven and liquid-bath methods (ISO/DIS 580)
98/561058DC 98/561058DC. Implants for surgery. Copolymers and blends based on polylactide. In vitro degradation testing (ISO/DIS 15814)
BS 7916:1998 BS 7916:1998. Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes
BS EN 1195:1998 BS EN 1195:1998. Timber structures. Test methods. Performance of structural floor decking
BS ISO 10770-1:1998 BS ISO 10770-1:1998. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for four-way directional flow control valves
BS ISO 10770-2:1998 BS ISO 10770-2:1998. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-way directional flow control valves
BS ISO 4413:1998 BS ISO 4413:1998. Hydraulic fluid power. General rules relating to systems
BS ISO 4414:1998 BS ISO 4414:1998. Pneumatic fluid power. General rules relating to systems
BS EN 898:1998 BS EN 898:1998. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate
BS A 324:1998, ISO 9199:1998 BS A 324:1998, ISO 9199:1998. Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/425°C and 1550 MPa (at ambient temperature)/600°C. Dimensions
BS A 323:1998, ISO 4095:1998 BS A 323:1998, ISO 4095:1998. Bihexagonal drives. Wrenching configuration. Metric series
98/560722DC 98/560722DC. Amendment No. 1. Sterile, single-use syringes, with or without needle, for insulin (ISO 8537:1992/DAM 1)
98/121085DC 98/121085DC. Code of practice for selection, installation and maintenance of entrance flooring systems
BS IEC 61366-2:1998 BS IEC 61366-2:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents. Guidelines for technical specifications for Francis turbines
BS EN ISO 10944:1998 BS EN ISO 10944:1998. Ophthalmic optics. Synoptophores
BS EN ISO 10943:1998 BS EN ISO 10943:1998. Ophthalmic instruments. Indirect ophthalmoscopes
BS EN ISO 10939:1998 BS EN ISO 10939:1998. Ophthalmic instruments. Slit-lamp microscopes
BS EN ISO 10940:1998 BS EN ISO 10940:1998. Ophthalmic instruments. Fundus cameras
BS EN ISO 10938:1998 BS EN ISO 10938:1998. Ophthalmic instruments. Chart projectors
BS EN 61298-3:1998, IEC 61298-3:1998 BS EN 61298-3:1998, IEC 61298-3:1998. Process measurement and control devices. General methods and procedures for evaluating performance. Tests for the effects of influence quantities
BS IEC 61292-1:1998 BS IEC 61292-1:1998. Fibre optics. Parameters of amplifier components
BS ISO/IEC TR 13818-5:1997 BS ISO/IEC TR 13818-5:1997. Information technology. Generic coding of moving pictures and associated audio information. Software simulation
BS 6840-13:1998, IEC 60268-13:1998 BS 6840-13:1998, IEC 60268-13:1998. Sound system equipment. Listening tests on loudspeakers
BS CECC 23700-801:1998 BS CECC 23700-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flex-rigid double-sided printed boards with through connections
BS CECC 23100-801:1998 BS CECC 23100-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double-sided printed boards with plain holes
BS CECC 23200-801:1998 BS CECC 23200-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double-sided printed boards with plated through holes
BS CECC 23300-801:1998 BS CECC 23300-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: multi-layer printed boards
BS CECC 23600-801:1998 BS CECC 23600-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flex-rigid multilayer printed boards with through connections
BS CECC 23800-801:1998 BS CECC 23800-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flexible multilayer printed boards with through connections
BS EN 60534-2-3:1998, IEC 60534-2-3:1997 BS EN 60534-2-3:1998, IEC 60534-2-3:1997. Industrial-process control valves. Flow capacity. Test procedures
BS ISO 8622:1998 BS ISO 8622:1998. Cinematography. Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes. A-chain reproduction characteristics
BS EN 45510-8-1:1998 BS EN 45510-8-1:1998. Guide for the procurement of power station equipment. Control and instrumentation
BS EN 1678:1998 BS EN 1678:1998. Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements
BS EN 1974:1998 BS EN 1974:1998. Food processing machinery. Slicing machines. Safety and hygiene requirements
BS EN 12131:1998 BS EN 12131:1998. Feather and down. Test methods. Determination of the quantitive composition of feather and down (manual method)
BS EN ISO 659:1999, BS 4289-4:1999 BS EN ISO 659:1999, BS 4289-4:1999. Oilseeds. Determination of oil content (Reference method)
BS ISO 6301-2:1997 BS ISO 6301-2:1997. Pneumatic fluid power. Compressed air lubricators. Test methods to determine the main characteristics to be included in supplier's literature
BS EN ISO 12865:1998 BS EN ISO 12865:1998. Ophthalmic instruments. Retinoscopes
BS EN ISO 12867:1998 BS EN ISO 12867:1998. Ophthalmic instruments. Trial frames
DD ENV 13070:1998 DD ENV 13070:1998. Fruit and vegetable juices. Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruit juices. Method using isotope ratio mass spectrometry
BS ISO 6264:1998 BS ISO 6264:1998. Hydraulic fluid power. Pressure-relief valves. Mounting surfaces
BS EN 993-15:1998 BS EN 993-15:1998. Methods of test for dense shaped refractory products. Determination of thermal conductivity by the hot-wire (parallel) method
BS EN 993-14:1998, BS 1902-5.6:1998 BS EN 993-14:1998, BS 1902-5.6:1998. Methods of test for dense shaped refractory products. Determination of thermal conductivity by the hot-wire (cross-array) method
BS EN ISO 4608:1998, BS 2782-4:Method 454E:1998 BS EN ISO 4608:1998, BS 2782-4:Method 454E:1998. Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature
BS EN 50136-1-2:1998 BS EN 50136-1-2:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for systems using dedicated alarm paths
BS EN 50136-1-3:1998 BS EN 50136-1-3:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for systems with digital communicators using the public switched telephone network
BS EN 50136-2-4:1998 BS EN 50136-2-4:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with voice communicators using the public switched telephone network
BS EN 50136-2-3:1998 BS EN 50136-2-3:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with digital communicators using the public switched telephone network
BS EN 50136-2-2:1998 BS EN 50136-2-2:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems using dedicated alarm paths
BS EN 50136-1-4:1998 BS EN 50136-1-4:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for systems with voice communicators using the public switched telephone network
BS EN ISO 1158:1998 BS EN ISO 1158:1998. Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine content
BS 4551-2:1998 BS 4551-2:1998. Methods of testing mortars, screeds and plasters. Chemical analysis and aggregate grading
BS ISO 14269-5:1997 BS ISO 14269-5:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Pressurization system test method
BS ISO 14269-4:1997 BS ISO 14269-4:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Air filter element test method
BS ISO 14269-3:1997 BS ISO 14269-3:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Determination of effect of solar heating
BS ISO 14269-2:1997 BS ISO 14269-2:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Heating, ventilating and air-conditioning test method and performance
BS ISO 14269-1:1997 BS ISO 14269-1:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Vocabulary
BS EN 10257-2:1998 BS EN 10257-2:1998. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables
BS 7012-10.1:1998, ISO 11884-1:1998 BS 7012-10.1:1998, ISO 11884-1:1998. Light microscopes. Minimum requirements for stereo microscopes. Stereo microscopes for general use
BS EN 12461:1998 BS EN 12461:1998. Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of waste
BS EN 12460:1998 BS EN 12460:1998. Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk
98/705265DC 98/705265DC. Aerospace series. Nickel-cadmium batteries. Technical specification
98/121223DC 98/121223DC. BS ISO 10086-1. Coal. Methods for evaluating flocculants for use in coal preparation. Part 1. Basic parameters
98/260820DC 98/260820DC. A2 amendment to EN 50014:1997. Electrical apparatus for potentially explosive atmospheres. General requirements
98/201211DC 98/201211DC. EN 60570. Electrical supply track systems for luminaires
BS ISO 13344:1996 BS ISO 13344:1996. Determination of the lethal toxic potency of fire effluents
98/201135DC 98/201135DC. IEC 60034-7:1992. Rotating electrical machinery. Part 7. Classification of types of construction and mounting arrangements (IM code) (IEC document 2/1009/CD). Classification of types of construction and mounting arrangements (IM code)
BS EN 331:1998 BS EN 331:1998. Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings
PD 6622:1998, CR 10260:1998 PD 6622:1998, CR 10260:1998. Designation systems for steel. Additional symbols
BS ISO/IEC 9579-2:1998 BS ISO/IEC 9579-2:1998. Information technology. Open systems interconnection. Remote database access. SQL Specialization
98/120951DC 98/120951DC. prEN 13207. Silage thermoplastic films
BS 4368-1:1998 BS 4368-1:1998. Metallic tube connectors for fluid power and general use. Split collet compression fittings
BS EN 12094-8:1998 BS EN 12094-8:1998. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for flexible connectors for CO2 systems
BS EN 1822-1:1998 BS EN 1822-1:1998. High efficiency air filters (HEPA and ULPA). Classification, performance testing, marking
BS EN 1822-2:1998 BS EN 1822-2:1998. High efficiency air filters (HEPA and ULPA). Aerosol production, measuring equipment, particle counting statistics
BS EN 1822-3:1998 BS EN 1822-3:1998. High efficiency air filters (HEPA and ULPA). Testing flat sheet filter media
BS EN 1846-1:1998 BS EN 1846-1:1998. Firefighting and rescue service vehicles. Nomenclature and designation
BS EN ISO 8985:1998 BS EN ISO 8985:1998. Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS EN 1891:1998 BS EN 1891:1998. Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
98/121311DC 98/121311DC. BS ISO 13936-1. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Part 1. Fixed opening method. Part 1: Fixed opening method
98/121312DC 98/121312DC. BS ISO 13936-2. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Part 2. Fixed load method. Part 2: Fixed load method
98/260748DC 98/260748DC. CISPR 14-2 (1997). Clause 1.1. Add 'similar radiators' (CISPR/F/245/CD). Immunity - Product family standard
98/560921DC 98/560921DC. BS 7755. Soil quality. Part 3. Chemical methods. New section. Determination of total trace element content. Digestion with hydrofluoric and perchloric acids (ISO/DIS 14869-1). Part 1: Digestion with hydrofluoric and perchloric acids
PD 6615:1998 PD 6615:1998. Guide to setting up a parts database
BS EN ISO 11690-3:1999 BS EN ISO 11690-3:1999. Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Sound propagation and noise prediction in workrooms
BS EN ISO 11688-1:1998 BS EN ISO 11688-1:1998. Acoustics. Recommended practice for the design of low-noise machinery and equipment. Planning
BS ISO/TR 9494:1997, ISO/TR 9494:1997 BS ISO/TR 9494:1997, ISO/TR 9494:1997. Petroleum liquids. Automatic pipeline sampling. Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids
BS ISO TR 15069:1997 BS ISO TR 15069:1997. Series 1 freight containers. Handling and securing. Rationale for ISO 3874 annex A
BS ISO TR 10495:1997 BS ISO TR 10495:1997. Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336
BS ISO TR 10828:1997 BS ISO TR 10828:1997. Worm gears. Geometry of worm profiles
BS EN 61362:1998 BS EN 61362:1998. Guide to specification of hydroturbine control systems
BS 4102:1998 BS 4102:1998. Specification for steel wire for general fencing purposes
BS EN 1886:1998 BS EN 1886:1998. Ventilation for buildings. Air handling units. Mechanical performance
BS ISO 4433-4:1997, BS 2782-11:Method 1161D:1998 BS ISO 4433-4:1997, BS 2782-11:Method 1161D:1998. Thermoplastics pipes. Resistance to liquid chemicals. Classification. Poly(vinylidene fluoride) (PVDF) pipes
98/704089DC 98/704089DC. Guide for the verification of a pump casing design procedure
98/230486DC 98/230486DC. IEC 60191-4. Mechanical standardization of semiconductor devices. Part 4. Coding system and classification into forms of package outlines for semiconductor device packages [IEC Document 47D/204/CDV]. Coding system and classification into forms of package outlines for semiconductor device packages
98/201009DC 98/201009DC. Conduits systems for electrical installations. Part 23. Particular requirements. Flexible conduit systems (IEC Document 23A/299/CD). Particular requirements - Flexible conduit systems
98/201008DC 98/201008DC. Conduit systems for electrical installations. Part 22. Particular requirement. Pliable conduit systems (IEC Document 23A/298/CD). Particular requirements - Pliable conduit systems
98/201007DC 98/201007DC. IEC 61386. Conduit systems for electrical installations. Part 21. Particular requirements. Rigid conduit systems (IEC Document 23A/297/CD. Particular requirement - Rigid conduit systems
98/200862DC 98/200862DC. IEC 60335-2-6, Ed 1. Safety of household and similar electrical appliances. Part 2.65. Particular requirements for air-cleaning appliances, subclauses 24.101 (61/1421/CD). Particular requirements for air-cleaning appliances
98/200861DC 98/200861DC. IEC 60335-2-59, Ed 2. Safety of household and similar electrical appliances. Part 2.29. Particular requirements for appliances for insect killers, subclauses 22.101 (61/1420/CD)
98/200860DC 98/200860DC. IEC 60335-2-23, Ed. 4. Safety of household and similar electrical appliances. Part 2.23. Particular requirements for appliances for skin or hair care, subclauses 19.101 and 30.101 (61/1419/CD). Particular requirements for appliances for skin or hair care
98/200844DC 98/200844DC. Amendment 2 to IEC 60598-2-23. Luminaires. Part 2.23. Particular requirements for extra-low voltage systems for filament lamps [IEC Document 34D/498/CD). Particular requirements for extra low voltage lighting systems for filament lamps
98/120867DC 98/120867DC. BS 903. Physical testing of rubber. Part A66. Estimation of thermal endurance. Estimation of thermal endurance
98/120224DC 98/120224DC. prEN 13131. Liquid petroleum products. Determination of nickel and vandium content. Atomic absorption spectrometric method
BS ISO 1625:1998 BS ISO 1625:1998. Plastics. Polymer dispersions. Determination of non-volatile matter (residue) at specified temperatures
BS EN ISO 4583:1998, BS 2782-4:Method 433B:1998 BS EN ISO 4583:1998, BS 2782-4:Method 433B:1998. Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine
BS EN ISO 3386-2:1998 BS EN ISO 3386-2:1998. Polymeric materials, cellular flexible. Determination of stress-strain characteristic in compression. High-density materials
BS ISO 6301-1:1997 BS ISO 6301-1:1997. Pneumatic fluid power. Compressed air lubricators. Main characteristics to be included in supplier's literature and product-marking requirements
BS EN ISO 8253-1:1998 BS EN ISO 8253-1:1998. Acoustics. Audiometric test methods. Basic pure tone air and bone conduction threshold audiometry
BS EN 1733:1998 BS EN 1733:1998. Suction catheters for use in the respiratory tract
BS EN ISO 8253-3:1998 BS EN ISO 8253-3:1998. Acoustics. Audiometric test methods. Speech audiometry
BS ISO/IEC ISP 11186-4:1997 BS ISO/IEC ISP 11186-4:1997. Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitions. FVT322. Font Assignment Type No. 2
BS ISO/IEC 10744:1997 BS ISO/IEC 10744:1997. Information technology. Hypermedia/time-based structuring language (HyTime)
BS ISO/IEC 14755:1997 BS ISO/IEC 14755:1997. Information technology. Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
WD/HB10145-BUSINESS GUIDE TO YEAR 2000 WD/HB10145-BUSINESS GUIDE TO YEAR 2000. A Business Guide to the Year 2000
BS 7798:1998 BS 7798:1998. Specification for industrial immersion heaters using metal-sheathed elements
BS 7797:1998 BS 7797:1998. Specification for industrial duct heaters using metal-sheathed elements
BS 3986-2:1998 BS 3986-2:1998. Methods of test for drying performance of agricultural grain dryers. Additional procedures and crop specific requirements
98/704534DC 98/704534DC. Aerospace series. Spring tension clips of electrical wiring, in alloy steel (X12CrNi18-10) (prEN 4420)
98/200790DC 98/200790DC. IEC 60335-2-90. Ed 1. Safety of household and similar electrical appliances. Part 2-90. Particular requirements for commercial microwave ovens, subclause 11.8
98/101750DC 98/101750DC. BS EN 12697-32. Bituminous mixtures. Test methods for hot mix asphalt. Part 32. Laboratory compaction of bituminous mixtures by a vibratory compactor (prEN 12697-32:1997). Part 32 : Laboratory compaction of bituminous mixtures by a vibratory compactor
BS ISO 5348:1998 BS ISO 5348:1998. Mechanical vibration and shock. Mechanical mounting of accelerometers
BS EN 134:1998 BS EN 134:1998. Respiratory protective devices. Nomenclature of components
BS 7825-3.10:1998 BS 7825-3.10:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Conditioning, sample and test piece preparation
BS 7825-3.8:1998 BS 7825-3.8:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Degradation and environmental properties
BS ISO TR 11552:1997 BS ISO TR 11552:1997. Lasers and laser-related equipment. Laser materials-processing machines. Performance specifications and benchmarks for cutting of metals
BS G 262:1998, ISO/TR 224:1998 BS G 262:1998, ISO/TR 224:1998. Aircraft. Declaration of design and performance for aircraft equipment. Standard form
BS IEC 61000-2-7:1998 BS IEC 61000-2-7:1998. Electromagnetic compatibility (EMC). Environment. Low frequency magnetic fields in various environments
BS IEC 60695-2-20:1995 BS IEC 60695-2-20:1995. Fire hazard testing. Glowing/Hot wire based test methods. Hot-wire coil ignitability test on materials
BS EN 61270-1:1998, IEC 61270-1:1996 BS EN 61270-1:1998, IEC 61270-1:1996. Capacitors for microwave ovens. General
BS ISO 11090-1:1998 BS ISO 11090-1:1998. Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy. Single column machines (cross slide table type and fixed table type)
BS ISO 2407:1997 BS ISO 2407:1997. Test conditions for internal cylindrical grinding machines with horizontal spindle. Testing of accuracy
BS ISO 6155:1998 BS ISO 6155:1998. Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy
BS EN ISO 389-7:1998 BS EN ISO 389-7:1998. Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing under free-field and diffuse-field listening conditions
BS EN 1041:1998 BS EN 1041:1998. Information supplied by the manufacturer with medical devices
BS EN 10111:1998 BS EN 10111:1998. Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
EP 203:2000 EP 203:2000. BSI Electronic Book. Project Management
EP 201:1998 EP 201:1998. BSI Electronic Book. Information Security Management
EP 200 EP 200. BSI Electronic Book. Quality Management Systems
BS 6767-2:1998 BS 6767-2:1998. Transportable accommodation units. Recommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to habitation
BS EN 10229:1998 BS EN 10229:1998. Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
BS EN 10228-2:1998 BS EN 10228-2:1998. Non-destructive testing of steel forgings. Penetrant testing
BS 7533-4:1998 BS 7533-4:1998. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of precast concrete flags or natural stone slabs
BS EN 160200-1:1998 BS EN 160200-1:1998. Harmonized system of quality assessment for electronic components. Sectional specification. Microwave modular electronic units of assessed quality. Capability approval procedure
BS EN 1367-2:1998 BS EN 1367-2:1998. Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
BS EN 1367-4:1998 BS EN 1367-4:1998. Tests for thermal and weathering properties of aggregates. Determination of drying shrinkage
BS ISO 10791-5:1998 BS ISO 10791-5:1998. Test conditions for machining centres. Accuracy and repeatability of positioning of work-holding pallets
BS ISO 10791-7:1998 BS ISO 10791-7:1998. Test conditions for machining centres. Accuracy of a finished test piece
98/704627DC 98/704627DC. ISO/CD 13216-1. Road vehicles. Child restraint systems. Anchorages in vehicles and attachments to anchorages. Part 1. Seat bight anchorages and attachments. Seat bight anchorages and attachments
98/645120DC 98/645120DC. ISO/IEC 15433. Information technology. Telecommunications and information exchange between systems. PISN. Inter-exchange signalling protocol. Wireless terminal authentication supplementary services
98/645121DC 98/645121DC. ISO/IEC 15432. Information technology. Telecommunications and information exchange between systems. PISN. Specification, functional model and information flows. Wireless terminal authentication supplementary services (WTAT and WTAN)
98/645122DC 98/645122DC. ISO/IEC 15431. Information technology. Telecommunications and information exchange between systems. PISN. Inter-exchange signalling protocol. Wireless terminal call handling additional network features
98/645123DC 98/645123DC. ISO/IEC 15430. Information technology. Telecommunications and information exchange between systems. PISN. Specification, functional model and information flows. Wireless terminal call handling additional network features
98/645124DC 98/645124DC. ISO/IEC 15429. Information technology. Telecommunications and information exchange between systems. PISN. Inter-exchange signalling protocol. Wireless terminal location registration supplementary services
98/645125DC 98/645125DC. ISO/IEC 15428. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Wireless terminal location registration supplementary service and wireless terminal information exchange additional network feature
98/560776DC 98/560776DC. Water quality. Determination of genotoxicity of water and waste water using the UMU-test (ISO/DIS 13829)
98/200685DC 98/200685DC. IEC 60439-3:1990. Amendment No. 2. Low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards (IEC Document 17D/199/CD). Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards
BS 7755-5.3:1998, ISO 11508:1998 BS 7755-5.3:1998, ISO 11508:1998. Soil quality. Physical methods. Determination of particle density
BS 6068-5.0:1998, ISO/TR 15462:1997 BS 6068-5.0:1998, ISO/TR 15462:1997. Water quality. Biological methods. Selection of tests for biodegradability
BS EN 1744-1:1998 BS EN 1744-1:1998. Tests for chemical properties of aggregates. Chemical analysis
DD ENV 12920:1998 DD ENV 12920:1998. Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditions
BS EN 61069-4:1998, IEC 61069-4:1997 BS EN 61069-4:1998, IEC 61069-4:1997. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of system performance
BS IEC 61624:1997 BS IEC 61624:1997. Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
BS IEC 61000-5-2:1997 BS IEC 61000-5-2:1997. Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Earthing and cabling
BS EN 933-7:1998 BS EN 933-7:1998. Tests for geometrical properties of aggregates. Determination of shell content. Percentage of shells in coarse aggregates
DD 247:1998 DD 247:1998. Documentation. Vocabulary
BS 7825-3.7:1998 BS 7825-3.7:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Rheological properties
BS 7825-3.4:1998 BS 7825-3.4:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Mechanical properties of rubber
BS EN 60243-1:1998, IEC 60243-1:1998 BS EN 60243-1:1998, IEC 60243-1:1998. Methods of test for electric strength of solid insulating materials. Tests at power frequencies
DD ENV 1805-1:1998 DD ENV 1805-1:1998. Data communication for HVAC Application Management Net. Building automation and control networking (BACnet)
BS ISO 11948-2:1998 BS ISO 11948-2:1998. Urine-absorbing aids. Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure
BS EN 60870-5-103:1998, IEC 60870-5-103:1997 BS EN 60870-5-103:1998, IEC 60870-5-103:1997. Telecontrol equipment and systems. Transmission protocols. Companion standard for the informative interface of protection equipment
BS IEC 61334-1-2:1997, IEC 61334-1-2:1997 BS IEC 61334-1-2:1997, IEC 61334-1-2:1997. Distribution automation using distribution line carrier systems. General considerations. Guide for specification
BS EN ISO 9241-7:1998 BS EN ISO 9241-7:1998. Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for display with reflections
BS EN 1504-1:1998 BS EN 1504-1:1998. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Definitions
BS EN 1543:1998 BS EN 1543:1998. Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers
98/200548DC 98/200548DC. IEC 60947-5-1:1997. To remove references to switching overvoltages (IEC Document 17B/890/CDV). Control circuit devices and switching elements. Electromechanical control circuit devices
98/200600DC 98/200600DC. Amendment 1 to IEC 60598-2-4. Luminaires. Part 2-4. Particular requirements for portable purpose luminaires (IEC 34D/497/CD). Particular requirements for general purpose luminaires
98/701317DC 98/701317DC. BS 4401. Methods of test for meat and meat products. Part 9. Measurement of pH. Reference method (ISO/DIS 2917)
BS EN 737-4:1998 BS EN 737-4:1998. Medical gas pipeline systems. Terminal units for anaesthetic gas scavenging systems
BS EN 3236:1998 BS EN 3236:1998. Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 3237:1998 BS EN 3237:1998. Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 3297:1998 BS EN 3297:1998. Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification
98/200612DC 98/200612DC. IEC 60691. 2nd edition. Thermal-links. Requirements and application guide. Revision of 7.1, 7.2, 10.1, 10.3 and 11.4 (IEC Document 32C/199/CD)
BS EN 3298:1998 BS EN 3298:1998. Inserts, thin wall, self-locking. Installation and removal procedure
BS EN 3676:1998 BS EN 3676:1998. Inserts, thin wall, self-locking. Design standard
BS ISO/IEC ISP 11189:1997 BS ISO/IEC ISP 11189:1997. Information technology. International standardized profile FD12. Directory data definitions. MHS use of the directory
BS ISO/IEC 11186-2:1996 BS ISO/IEC 11186-2:1996. Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitions. FVT311. Repertoire Assignment Type for ISO/IEC 10646
BS ISO/IEC ISP 11187-4:1996 BS ISO/IEC ISP 11187-4:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profiles. AVT23. S-mode Paged Application Profile
98/101379DC 98/101379DC. Guide on the interpretation of petrographical examinations for alkali-silica reactivity
98/101449DC 98/101449DC. Amendment No. 3 to BS 4987:Part 1:1993. Coated macadam for roads and other paved areas. Specification for constituent materials and for mixtures. Specification for constituent materials and for mixtures
BS EN ISO 12687:1998 BS EN ISO 12687:1998. Metallic coatings. Porosity tests. Humid sulfur (flowers of sulfur) test
BS EN 1816:1998 BS EN 1816:1998. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
BS EN 1817:1998 BS EN 1817:1998. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings
BS EN 12199:1998 BS EN 12199:1998. Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
BS EN ISO 13341:1998 BS EN ISO 13341:1998. Transportable gas cylinders. Fitting of valves to gas cylinders
BS EN ISO 11114-3:1998 BS EN ISO 11114-3:1998. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Autogenous ignition test in oxygen atmosphere
BS EN ISO 11114-1:1998 BS EN ISO 11114-1:1998. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
BS ISO/IEC TR 15504-3:1998 BS ISO/IEC TR 15504-3:1998. Information technology. Software process assessment. Performing an assessment
BS ISO/IEC TR 15504-2:1998 BS ISO/IEC TR 15504-2:1998. Information technology. Software process assessment. A reference model for processes and process capability
BS ISO/IEC 15504-1:1998 BS ISO/IEC 15504-1:1998. Information technology. Software process assessment. Concepts and introductory guide
BS ISO/IEC TR 15504-9:1998 BS ISO/IEC TR 15504-9:1998. Information technology. Software process assessment. Vocabulary
BS ISO/IEC TR 15504-8:1998 BS ISO/IEC TR 15504-8:1998. Information technology. Software process assessment. Guide for use in determining supplier process capability
BS ISO/IEC TR 15504-7:1998 BS ISO/IEC TR 15504-7:1998. Information technology. Software process assessment. Guide for use in process improvement
BS ISO/IEC TR 15504-6:1998 BS ISO/IEC TR 15504-6:1998. Information technology. Software process assessment. Guide to competency of assessors
BS ISO/IEC TR 15504-4:1998 BS ISO/IEC TR 15504-4:1998. Information technology. Software process assessment. Guide to performing assessments
BS EN 1217:1998 BS EN 1217:1998. Materials and articles in contact with foodstuffs. Test methods for water absorption of ceramic articles
BS 2000-2:1998, ISO 2977:1997 BS 2000-2:1998, ISO 2977:1997. Methods of test for petroleum and its products. Petroleum products and hydrocarbon solvents. Determination of aniline point and mixed aniline point
BS 2000-16:1998, ISO 3013:1997 BS 2000-16:1998, ISO 3013:1997. Methods of test for petroleum and its products. Petroleum products. Determination of the freezing point of aviation fuels
BS 2000-130:1998, ISO 3839:1996 BS 2000-130:1998, ISO 3839:1996. Methods of test for petroleum and its products. Petroleum products. Determination of bromine number of distillates and aliphatic olefins. Electrometric method
BS 2000:Part 432:1998, ISO 8973:1997 BS 2000:Part 432:1998, ISO 8973:1997. Methods of test for petroleum and its products. Liquefied petroleum gases. Calculation method for density and vapour pressure
BS 2000-431:1998, ISO 7537:1997 BS 2000-431:1998, ISO 7537:1997. Methods of test for petroleum and its products. Petroleum products. Determination of acid number. Semi-micro colour-indicator titration method
BS 2000-433:1998, ISO 14597:1997 BS 2000-433:1998, ISO 14597:1997. Methods of test for petroleum and its products. Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN 12080:1998 BS EN 12080:1998. Railway applications. Axleboxes. Rolling bearings
BS EN 12081:1998 BS EN 12081:1998. Railway applications. Axleboxes. Lubricating greases
BS EN 12082:1998 BS EN 12082:1998. Railway applications. Axleboxes. Performance testing
BS 6911-14:1998, ISO 10265:1998 BS 6911-14:1998, ISO 10265:1998. Testing earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems
BS EN 474-11:1998 BS EN 474-11:1998. Earth-moving machinery. Safety. Requirements for earth and landfill compactors
BS EN 474-10:1998 BS EN 474-10:1998. Earth-moving machinery. Safety. Requirements for trenchers
BS EN 474-9:1998 BS EN 474-9:1998. Earth-moving machinery. Safety. Requirements for pipelayers
BS EN 474-8:1998 BS EN 474-8:1998. Earth-moving machinery. Safety. Requirements for graders
BS EN 474-7:1998 BS EN 474-7:1998. Earth-moving machinery. Safety. Requirements for scrapers
BS EN 1978:1998 BS EN 1978:1998. Copper and copper alloys. Copper cathodes
BS EN 1976:1998 BS EN 1976:1998. Copper and copper alloys. Cast unwrought copper products
BS EN 1977:1998 BS EN 1977:1998. Copper and copper alloys. Copper drawing stock (wire rod)
BS EN 10223-6:1998 BS EN 10223-6:1998. Steel wire and wire products for fences. Steel wire chain link fencing
BS EN 10223-5:1998 BS EN 10223-5:1998. Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
BS EN 10223-4:1998 BS EN 10223-4:1998. Steel wire and wire products for fences. Steel wire welded mesh fencing
98/260317DC 98/260317DC. IEC 61000-4-2. Definition of accessible parts under normal operating conditions (IEC SC77B/231/CD). Testing and measurement techniques. Electrostatic discharges. Immunity test.
98/120559DC 98/120559DC. prEN 13122. Hot gas welding of semifinished products of thermoplastic materials
98/120189DC 98/120189DC. BS 6782:Part 16. Binders for paints. Storage stability (ISO/CD 15716)
DD ENV 343:1998 DD ENV 343:1998. Protective clothing. Protection against foul weather
DD ENV 342:1998 DD ENV 342:1998. Protective clothing. Ensembles for protection against cold
BS EN 12468:1998 BS EN 12468:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate releases of genetically modified plants
BS EN 50248:1998 BS EN 50248:1998. Characteristics of DAB receivers
BS EN 160201:1998 BS EN 160201:1998. Harmonized system of quality assessment for electronic components. Blank detail specification. Microwave modular electronic units of assessed quality. Capability approval
BS EN 50083-6:1998 BS EN 50083-6:1998. Cabled distribution systems for television and sound signals. Optical equipment
BS EN 1797-1:1998 BS EN 1797-1:1998. Cryogenic vessels. Gas/material compatibility. Oxygen compatibility
BS ISO 5782-2:1997 BS ISO 5782-2:1997. Pnuematic fluid power. Compressed air filters. Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 5782-1:1997 BS ISO 5782-1:1997. Pnuematic fluid power. Compressed air filters. Main characteristics to be included in supplier's literature and product-marking requirements
BS ISO 13752:1998 BS ISO 13752:1998. Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference
BS EN 1679-1:1998 BS EN 1679-1:1998. Reciprocating internal combustion engines. Safety. Compression ignition engines
BS EN 1070:1998 BS EN 1070:1998. Safety of machinery. Terminology
BS EN 1081:1998 BS EN 1081:1998. Resilient floor coverings. Determination of the electrical resistance
BS ISO/IEC ISP 15121-3:1997 BS ISO/IEC ISP 15121-3:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents. AOD13. DTAM/Manipulation
BS ISO/IEC ISP 15121-2:1997 BS ISO/IEC ISP 15121-2:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents. AOD12. DTAM/Insert
BS ISO/IEC ISP 15121-1:1997 BS ISO/IEC ISP 15121-1:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents. AOD11. DTAM/Read only
BS ISO/IEC 8613-9:1996 BS ISO/IEC 8613-9:1996. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Audio content architectures
BS ISO/IEC 10168-1:1997 BS ISO/IEC 10168-1:1997. Information technology. Open systems interconnection. Conformance test suite for the session protocol. Test suite structure and test purposes
BS ISO/IEC 9074:1997 BS ISO/IEC 9074:1997. Information technology. Open systems interconnection. Estelle: a formal description technique based on an extended state transition model
BS ISO/IEC 15507:1997 BS ISO/IEC 15507:1997. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Inter-exchange signalling protocol. PINX clock synchronization
BS EN ISO 11987:1998, BS 7208-14:1998 BS EN ISO 11987:1998, BS 7208-14:1998. Ophthalmic optics. Contact lenses. Determination of shelf-life
BS 1692:1998 BS 1692:1998. Specification for gin blocks
BS ISO 11379:1997 BS ISO 11379:1997. Textile floor coverings. Laboratory cleaning procedure using spray extraction
BS ISO 11377:1998 BS ISO 11377:1998. Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation
BS Z 7:1998, ISO 14962:1997 BS Z 7:1998, ISO 14962:1997. Space data and information transfer systems. ASCII encoded English
BS Z 6:1998, ISO 14961:1997 BS Z 6:1998, ISO 14961:1997. Space data and information transfer systems. Parameter value language specification
BS Z 8:1998, ISO 13419:1997 BS Z 8:1998, ISO 13419:1997. Space data and information transfer systems. Packet telemetry
BS Z 9:1998, ISO 13420:1997 BS Z 9:1998, ISO 13420:1997. Space data and information transfer systems. Advanced orbiting systems. Networks and data links. Architectural specification
BS EN 1746:1999 BS EN 1746:1999. Safety of machinery. Guidance for the drafting of the noise clauses of safety standards
BS EN 1899-2:1998, BS 6068-2.64:1998 BS EN 1899-2:1998, BS 6068-2.64:1998. Water quality. Determination of biochemical oxygen demand after n days (BODn). Method for undiluted samples
BS EN 1899-1:1998, BS 6068-2.63:1998 BS EN 1899-1:1998, BS 6068-2.63:1998. Water quality. Determination of biochemical oxygen demand after n days (BODn). Dilution and seeding method with allylthiourea addition
BS EN 12011:1998 BS EN 12011:1998. Instrumentation to be used in association with non-active surgical implants. General requirements
BS EN 12010:1998 BS EN 12010:1998. Non-active surgical implants. Joint replacement implants. Particular requirements
98/701005DC 98/701005DC. Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels (ISO/DIS 15394)
98/120287DC 98/120287DC. BS ISO/TR 11974. Measurement of liquid flow in open channels. Electromagnetic current meters
97/565070DC 97/565070DC. Specification for non-prescriptive graduated support hosiery
98/200475DC 98/200475DC. EN 60335-2-14:1996/prA11:1998. Safety of household and similar electrical appliances. Part 2. Particular requirements for kitchen machines
KIT 53 KIT 53. TickIT guide offer pack 2
KIT 52 KIT 52. TickIT guide offer pack 1
BS 7012-4.1:1998, ISO 8038-1:1997 BS 7012-4.1:1998, ISO 8038-1:1997. Light microscopes. Specification for microscope objective and nosepiece screw threads. Screw thread type RMS (4/5 in x 1/36 in)
BS EN 10240:1998 BS EN 10240:1998. Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants
BS 1016-111:1998, ISO 12900:1998 BS 1016-111:1998, ISO 12900:1998. Methods for analysis and testing of coal and coke. Determination of abrasion index of coal
BS 1016-104.3:1998, ISO 562:1998 BS 1016-104.3:1998, ISO 562:1998. Methods for analysis and testing of coal and coke. Determination of volatile matter content
BS EN 12220:1998 BS EN 12220:1998. Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation
PD 6621:1998 PD 6621:1998. Guidance on the new European test method standards for thermal insulation materials
98/200233DC 98/200233DC. IEC 61960-2. Secondary lithium cells and batteries for portable applications. Part 2. Secondary lithium batteries (IEC document 21A/230/CD). Secondary lithium batteries
98/120048DC 98/120048DC. BS ISO 10346-6:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 6. Chrome green glass. Determination of aluminium oxide by complexometry, iron (III) oxide, titanium (IV) oxide and chromium (III) oxide by molecular absorption spectrometry, calcium oxide and magnesium oxide by complexometry (ISO 10346-6)
98/120047DC 98/120047DC. BS ISO 10346-5:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 5. Determination of total sulfur by gravimetric or volumetric analysis (ISO 10346-5)
98/120046DC 98/120046DC. BS ISO 10346-4:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 4. Determination of sodium oxide, potassium oxide, magnesium oxide, calcium oxide, barium oxide, aluminium oxide and total iron (III) oxide by flame absorption spectrometry (ISO 10346-4)
BS 6499:1998 BS 6499:1998. Metal screw necks, screw caps and inner seals for metal containers. Specification


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment