2009/09/07

Cheapest & Latest BSI Standard (PDF) (10)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS ISO 15967:2007 BS ISO 15967:2007. Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
BS ISO/IEC 24724:2006 BS ISO/IEC 24724:2006. Information technology. Automatic identification and data capture techniques. Reduced space symbology (RSS) bar code symbology specification
BS ISO/IEC 24728:2006 BS ISO/IEC 24728:2006. Information technology. Automatic identification and data capture techniques. MicroPDF417 bar code symbology specification
BS ISO 4926:2006 BS ISO 4926:2006. Road vehicles. Hydraulic braking systems. Non-petroleum-base reference fluids
BS EN 60947-1:2007 BS EN 60947-1:2007. Low-voltage switchgear and controlgear. General rules
BS EN 60947-5-8:2006 BS EN 60947-5-8:2006. Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Three-position enabling switches
BS EN 15207:2006 BS EN 15207:2006. Tanks for transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
BS EN 15208:2007 BS EN 15208:2007. Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications
BS EN 1092-1:2007 BS EN 1092-1:2007. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
BS EN 15200:2007 BS EN 15200:2007. Sanitary appliances. Multifunction shower cabinets
BS ISO 22896:2006 BS ISO 22896:2006. Road vehicles. Deployment and sensor bus for occupant safety systems
BS ISO 20753:2008 BS ISO 20753:2008. Plastics. Test specimens
ISO21847-1 : 2007 EDTN1 ISO21847-1 : 2007 EDTN1. ISO21847-1 : 2007 Nuclear fuel technology. Alpha spectrometry. Part 1: Determination of neptunium in uranium and its compounds
ISO21847-2 : 2007 EDTN1 ISO21847-2 : 2007 EDTN1. ISO21847-2 : 2007 Nuclear fuel technology. Alpha spectrometry. Part 2: Determination of plutonium in uranium and its compounds
ISO21847-3 : 2007 EDTN1 ISO21847-3 : 2007 EDTN1. ISO21847-3 : 2007 Nuclear fuel technology. Alpha spectrometry. Part 3: Determination of uranium 232 in uranium and its compounds
BS EN ISO 22254:2005 BS EN ISO 22254:2005. Manual toothbrushes. Resistance of tufted portion to deflection
BS EN 482:2006 BS EN 482:2006. Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents
BS ISO 1437:2007 BS ISO 1437:2007. Rubber compounding ingredients. Carbon black. Determination of sieve residue
BS ISO 4664-2:2006 BS ISO 4664-2:2006. Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Torsion pendulum methods at low frequencies
BS EN 1395-1:2007 BS EN 1395-1:2007. Thermal spraying. Acceptance inspection of thermal spraying equipment. General requirements
BS EN 1395-3:2007 BS EN 1395-3:2007. Thermal spraying. Acceptance inspection of thermal spraying equipment. Arc spraying
BS EN 1395-4:2007 BS EN 1395-4:2007. Thermal spraying. Acceptance inspection of thermal spraying equipment. Plasma spraying
BS EN 1395-5:2007 BS EN 1395-5:2007. Thermal spraying. Acceptance inspection of thermal spraying equipment. Plasma spraying in chambers
BS EN 1395-6:2007 BS EN 1395-6:2007. Thermal spraying. Acceptance inspection of thermal spraying equipment. Manipulator systems
BS ISO 21360:2007 BS ISO 21360:2007. Vacuum technology. Standard methods for measuring vacuum-pump performance. General description
BS ISO 21994:2007 BS ISO 21994:2007. Passenger cars. Stopping distance at straight-line braking with ABS. Open-loop test method
BS EN ISO 5999:2007 BS EN ISO 5999:2007. Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
BS EN ISO 8307:2007 BS EN ISO 8307:2007. Flexible cellular polymeric materials. Determination of resilience by ball rebound
PD CLC/TR 50507:2007 PD CLC/TR 50507:2007. Railway applications. Interference limits of existing track circuits used on European railways
BS ISO 230-3:2007 BS ISO 230-3:2007. Test code for machine tools. Determination of thermal effects
ISO12460-1 : 2007 EDTN1 ISO12460-1 : 2007 EDTN1. ISO12460-1 : 2007 Wood-based panels. Determination of formaldehyde release. Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
BS EN 60904-1:2006 BS EN 60904-1:2006. Photovoltaic devices. Measurement of photovoltaic current-voltage characteristics
BS EN 61193-2:2007 BS EN 61193-2:2007. Quality assessment systems. Selection and use of sampling plans for inspection of electronic components and packages
BS EN 60068-2-82:2007 BS EN 60068-2-82:2007. Environmental testing. Tests. Test Tx. Whisker test methods for electronic and electric components
BS EN 62137-1-1:2007 BS EN 62137-1-1:2007. Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Pull strength test
BS EN 61190-1-2:2007 BS EN 61190-1-2:2007. Attachment materials for electronic assembly. Requirements for soldering pastes for high-quality interconnects in electronics assembly
BS EN 61190-1-3:2007 BS EN 61190-1-3:2007. Attachment materials for electronic assembly. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
ISO15531-43 : 2006 EDTN1 ISO15531-43 : 2006 EDTN1. ISO 15531-43 Industrial automation systems and integration - Industrial manufacturing management data -. Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange
ISO18629-14 : 2006 EDTN1 ISO18629-14 : 2006 EDTN1. ISO 18629-14 Industrial automation systems and integration - Process specification language -. Part 14: Resource theories
BS ISO 4665:2006 BS ISO 4665:2006. Rubber, vulcanized or thermoplastic. Resistance to weathering
BS EN 860:2007 BS EN 860:2007. Safety of woodworking machines. One side thickness planing machines
BS ISO 18898:2006 BS ISO 18898:2006. Rubber. Calibration and verification of hardness testers
BS ISO 5940-2:2007 BS ISO 5940-2:2007. Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Determination of the softening point (Mettler softening point method)
ISO18629-42 : 2006 EDTN1 ISO18629-42 : 2006 EDTN1. ISO 18629-42 Industrial automation systems and integration - Process specification language -. Part 42: Definitional extension: Temporal and state extension
BS EN 62076:2006 BS EN 62076:2006. Industrial electroheating installations. Test methods for induction channel and induction crucible furnaces
ISO18213-2 : 2007 EDTN1 ISO18213-2 : 2007 EDTN1. ISO 18213 : 2007 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 2:Data standardization for tank calibration
ISO18213-1 : 2007 EDTN1 ISO18213-1 : 2007 EDTN1. ISO18213 : 2007 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 1:Procedural Overview
ISO18213-4 : 2008 EDTN1 ISO18213-4 : 2008 EDTN1. ISO 18213-4 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 4: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, slow bubbling rate
ISO18213-5 : 2008 EDTN1 ISO18213-5 : 2008 EDTN1. ISO 18213-5 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 5: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, fast bubbling rate
ISO18213-6 : 2008 EDTN1 ISO18213-6 : 2008 EDTN1. ISO 18213-6 Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 6: Accurate in-tank determination of liquid density in accountancy tanks equipped with dip tubes
BS 7882:2008 BS 7882:2008. Method for calibration and classification of torque measuring devices
PD IEC/TR 60787:2007 PD IEC/TR 60787:2007. Application guide for the selection of high-voltage current-limiting fuse-links for transformer circuits
BS ISO 5667-20:2008 BS ISO 5667-20:2008. Water quality. Sampling. Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems
BS EN ISO 11890-2:2006 BS EN ISO 11890-2:2006. Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
BS EN ISO 11998:2006 BS EN ISO 11998:2006. Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings
BS EN 62137-1-2:2007 BS EN 62137-1-2:2007. Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Shear strength test
BS EN ISO 8434-1:2007 BS EN ISO 8434-1:2007. Metallic tube connections for fluid power and general use. 24 degree cone connectors
BS 8500-1:2006 BS 8500-1:2006. Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier
BS 8500-2:2006 BS 8500-2:2006. Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete
BS ISO 21398:2007 BS ISO 21398:2007. Hard coal and coke. Guidance to the inspection of mechanical sampling systems
BS EN ISO 9453:2006 BS EN ISO 9453:2006. Soft solder alloys. Chemical compositions and forms
BS ISO 17500:2006 BS ISO 17500:2006. Aluminium oxide used for the production of primary aluminium. Determination of attrition index
BS EN 10028-7:2007 BS EN 10028-7:2007. Flat products made of steels for pressure purposes. Stainless steels
BS ISO 13947:2007 BS ISO 13947:2007. Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
BS ISO 13374-2:2007 BS ISO 13374-2:2007. Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Data processing
BS EN 61169-37:2007 BS EN 61169-37:2007. Radio-frequency connectors. Sectional specification for STWX8 R.F connectors
BS EN 61587-1:2007 BS EN 61587-1:2007. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
BS EN 61800-5-2:2007 BS EN 61800-5-2:2007. Adjustable speed electrical power drive systems. Safety requirements. Functional
BS EN 12642:2006 BS EN 12642:2006. Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements
BS EN ISO 3411:2007 BS EN ISO 3411:2007. Earth-moving machinery. Physical dimensions of operators and minimum operator space envelope
ISO5010 : 2007 EDTN3 ISO5010 : 2007 EDTN3. ISO 5010 Earth-moving machinery - Rubber tyred machines - Steering requirements
BS EN 14591-4:2007 BS EN 14591-4:2007. Explosion prevention and protection in underground mines. Protective systems. Automatic extinguishing systems for road headers
BS EN 15233:2007 BS EN 15233:2007. Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
BS EN 50461:2006 BS EN 50461:2006. Solar cells. Datasheet information and product data for crystalline silicon solar cells
DD ISO/TS 17104:2006 DD ISO/TS 17104:2006. Rotary tool for threaded fasteners. Hydraulic impulse tools. Performance test method
BS ISO 17066:2007 BS ISO 17066:2007. Hydraulic tools. Vocabulary
BS ISO 22900-1:2008 BS ISO 22900-1:2008. Road vehicles. Modular vehicle communication interface (MVCI). Hardware design requirements
BS ISO 3338-2:2007 BS ISO 3338-2:2007. Cylindrical shanks for milling cutters. Dimensional characteristics of flatted cylindrical shanks
BS ISO 1726-2:2007 BS ISO 1726-2:2007. Road vehicles. Mechanical couplings between tractors and semi-trailers. Interchangeability between low-coupling tractors and high-volume semi-trailers
BS ISO 3842:2006 BS ISO 3842:2006. Road vehicles. Fifth wheels. Interchangeability
ISO12357-2 : 2007 EDTN1 ISO12357-2 : 2007 EDTN1. ISO 12357-2:2007 Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars -. Part 2: Strength tests for special applications
BS ISO/IEC 9973:2006 BS ISO/IEC 9973:2006. Information technology. Computer graphics, image processing and environmental data representation. Procedures for registration of items
BS EN 62271-207:2007 BS EN 62271-207:2007. High-voltage switchgear and controlgear. Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV
BS EN 61071:2007 BS EN 61071:2007. Capacitors for power electronics
BS ISO 10934-2:2007 BS ISO 10934-2:2007. Optics and optical instruments. Vocabulary for microscopy. Advanced techniques in light microscopy
BS ISO 23600:2007 BS ISO 23600:2007. Assistive products for persons with vision impairments and persons with vision and hearing impairments. Acoustic and tactile signals for pedestrian traffic lights
BS ISO 22196:2007 BS ISO 22196:2007. Plastics. Measurement of antibacterial activity on plastics surfaces
BS EN 13544-1:2007 BS EN 13544-1:2007. Respiratory therapy equipment. Nebulizing systems and their components
BS ISO 23273-2:2006 BS ISO 23273-2:2006. Fuel cell road vehicles. Safety specifications. Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
BS ISO 14065:2007 BS ISO 14065:2007. Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
BS 6002-1:2007 BS 6002-1:2007. Sampling procedures for inspection by variables. Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS 6002-2:2007 BS 6002-2:2007. Sampling procedures for inspection by variables. General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS ISO 20128:2006 BS ISO 20128:2006. Milk products. Enumeration of presumptive Lactobacillus acidophilus on a selective medium. Colony-count technique at 37°C
BS EN 50131-6:2008 BS EN 50131-6:2008. Alarm systems. Intrusion and hold-up systems. Power supplies
BS EN 15255:2007 BS EN 15255:2007. Energy performance of buildings. Sensible room cooling load calculation. General criteria and validation procedures
BS EN 60793-2-10:2007 BS EN 60793-2-10:2007. Optical fibres. Product specifications. Sectional specification for category A1 multimode fibres
BS ISO 6722:2006 BS ISO 6722:2006. Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements
BS ISO 11898-5:2007 BS ISO 11898-5:2007. Road vehicles. Controller area network (CAN). High-speed medium access unit with low-power mode
BS EN ISO 14855-1:2007 BS EN ISO 14855-1:2007. Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. General method
BS EN 61290-5-1:2006 BS EN 61290-5-1:2006. Optical amplifiers. Test methods. Reflectance parameters. Optical spectrum analyzer method
BS EN 15132:2006 BS EN 15132:2006. Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
BS ISO 1088:2007 BS ISO 1088:2007. Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS ISO 17554:2005 BS ISO 17554:2005. Reaction to fire tests. Mass loss measurement
BS ISO 12643-1:2007 BS ISO 12643-1:2007. Graphic technology. Safety requirements for graphic technology equipment and systems. General requirements
BS EN 61937-5:2006 BS EN 61937-5:2006. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the DTS (digital theatre systems) format(s)
BS IEC 60987:2007 BS IEC 60987:2007. Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
BS ISO 36:2005 BS ISO 36:2005. Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
BS 1970:2006 BS 1970:2006. Hot water bottles manufactured from rubber and PVC. Specification
ISO/IEC14165-251 : 2008 EDTN1 ISO/IEC14165-251 : 2008 EDTN1. ISO/IEC14165-251 : 2008 Information technology. Fibre channel. Part 251. Framing and signalling (FC-FS)
PD IEC/TR 61282-9:2006 PD IEC/TR 61282-9:2006. Fibre optic communication system design guides. Guidance on polarization mode dispersion measurements and theory
BS EN 61290-1-1:2006 BS EN 61290-1-1:2006. Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method
BS ISO/IEC 19798:2006 BS ISO/IEC 19798:2006. Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
BS ISO/IEC 24711:2006 BS ISO/IEC 24711:2006. Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
BS ISO/IEC 24712:2006 BS ISO/IEC 24712:2006. Colour test pages for measurement of office equipment consumable yield
BS EN 61000-4-3:2006+A1:2008 BS EN 61000-4-3:2006+A1:2008. Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio- Frequency, electromagnetic field immunity test
BS EN 15257:2006 BS EN 15257:2006. Cathodic protection. Competence levels and certification of cathodic protection personnel
BS ISO 8820-7:2007 BS ISO 8820-7:2007. Road vehicles. Fuse-links. Fuse-links with tabs (Type G) with rated voltage of 450 V
BS ISO 20904:2006 BS ISO 20904:2006. Hard coal. Sampling of slurries
PAS 68:2007 PAS 68:2007. Specification for vehicle security barriers
PAS 69:2006 PAS 69:2006. Guidelines for the specification and installation of vehicle security barriers
BS EN 62317-8:2006 BS EN 62317-8:2006. Ferrite cores. Dimensions. E-cores
BS EN 351-2:2007 BS EN 351-2:2007. Durability of wood and wood-based products. Preservative-treated solid wood. Guidance on sampling for the analysis of preservative-treated wood
BS ISO 14572:2006 BS ISO 14572:2006. Road vehicles. Round, screened and unscreened, 60 V and 600 V multi-core sheathed cables. Test methods and requirements for basic and high-performance cables
BS ISO 22413:2007 BS ISO 22413:2007. Transfer sets for pharmaceutical preparations. Requirements and test methods
BS EN 61753-021-6:2008 BS EN 61753-021-6:2008. Fibre optic interconnecting devices and passive components performance standard. Grade B/2 single-mode fibre optic connectors for category O. Uncontrolled environment
ISO18629-13 : 2006 EDTN1 ISO18629-13 : 2006 EDTN1. ISO 18629-13 Industrial automation systems and integration - Process specification language - . Part 13: Duration and ordering theories
ISO18629-43 : 2006 EDTN1 ISO18629-43 : 2006 EDTN1. ISO 18629-43 Industrial automation systems and integration - Process specification language - . Part 43: Activity ordering and duration extensions
ISO18629-44 : 2006 EDTN1 ISO18629-44 : 2006 EDTN1. ISO 18629-44 Industrial automation systems and integration - Process specification language - . Part 44: Definitional extension: resource extensions
BS EN 15182-4:2007 BS EN 15182-4:2007. Hand-held branchpipes for fire service use. High pressure branchpipes PN 40
BS EN 61788-1:2007 BS EN 61788-1:2007. Superconductivity. Critical current measurement. D.C. critical current of Nb-Ti composite superconductors
BS ISO 3408-1:2006 BS ISO 3408-1:2006. Ball screws. Vocabulary and designation
BS ISO 3408-3:2006 BS ISO 3408-3:2006. Ball screws. Acceptance conditions and acceptance tests
BS 7959-3:2007 BS 7959-3:2007. Materials used for the control of liquid spillages. Colour coding of sorbent materials
BS EN 15496:2008 BS EN 15496:2008. Cycles. Requirements and test methods for cycle locks
BS EN 15271:2007 BS EN 15271:2007. Inland navigation vessels. Studless anchor chain. Anchor equipment
BS ISO/IEC 24707:2007 BS ISO/IEC 24707:2007. Information technology. Common Logic (CL). A framework for a family of logic-based languages
BS EN 61169-8:2007 BS EN 61169-8:2007. Radio-frequency connectors. Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
BS EN 61169-16:2007 BS EN 61169-16:2007. Radio-frequency connectors. Sectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N)
BS EN 10292:2007 BS EN 10292:2007. Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions
BS EN ISO 18276:2006 BS EN ISO 18276:2006. Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels. Classification
BS EN 60269-1:2007, BS 88-1:2007 BS EN 60269-1:2007, BS 88-1:2007. Low-voltage fuses. General requirements
BS 88-2:2007 BS 88-2:2007. Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I
BS EN 60269-4:2007, BS 88-4:2007 BS EN 60269-4:2007, BS 88-4:2007. Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devices
BS 88-3:2007 BS 88-3:2007. Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications). Examples of standardized systems of fuses A to F
BS EN 15272-2:2007 BS EN 15272-2:2007. Inland navigation vessels. Rope leading. Fairlead
BS ISO 8820-5:2007 BS ISO 8820-5:2007. Road vehicles. Fuse-links. Fuse-links with axial terminals (strip fuse-links) types SF 30 and SF 51 and test fixtures
BS EN ISO 16812:2007 BS EN ISO 16812:2007. Petroleum, petrochemical and natural gas industries. Shell-and-tube heat exchangers
ISO7240-10 : 2007 EDTN1 ISO7240-10 : 2007 EDTN1. ISO7240-10 : 2007 Fire detection and alarm systems . Part 10 : Point-type flame detectors
BS ISO 13292:2006 BS ISO 13292:2006. Copper, lead, zinc and nickel concentrates. Experimental methods for checking the bias of sampling
BS EN 61753-083-2:2008 BS EN 61753-083-2:2008. Fibre optic interconnecting devices and passive components performance standard. Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C. Controlled environment
BS EN 15274:2007 BS EN 15274:2007. General purpose adhesives for structural assembly. Requirements and test methods
BS EN 15275:2007 BS EN 15275:2007. Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
BS EN 60216-3:2006 BS EN 60216-3:2006. Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics
BS EN 15283-1:2008 BS EN 15283-1:2008. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Gypsum boards with mat reinforcement
BS EN 15283-2:2008 BS EN 15283-2:2008. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Gypsum fibre boards
BS EN 13611:2007 BS EN 13611:2007. Safety and control devices for gas burners and gas burning appliances. General requirements
BS EN 161:2007 BS EN 161:2007. Automatic shut-off valves for gas burners and gas appliances
DD CLC/TS 50502:2007 DD CLC/TS 50502:2007. Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems
DD ISO/PAS 22574:2007 DD ISO/PAS 22574:2007. Road vehicles. Brake linings friction materials. Visual inspection
PD ISO/IEC TR 18047-6:2006 PD ISO/IEC TR 18047-6:2006. Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz
PD ISO/IEC TR 18047-2:2006 PD ISO/IEC TR 18047-2:2006. Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communication below 135 kHz
BS EN 15282:2007 BS EN 15282:2007. Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
BS EN 15284:2007 BS EN 15284:2007. Materials and articles in contact with food stuffs. Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
BS ISO 18415:2007 BS ISO 18415:2007. Cosmetics. Microbiology. Detection of specified and non-specified microorganisms
BS ISO 18416:2007 BS ISO 18416:2007. Cosmetics. Microbiology. Detection of Candida albicans
BS ISO 11625:2007 BS ISO 11625:2007. Gas cylinders. Safe handling
BS EN 14359:2006 BS EN 14359:2006. Gas-loaded accumulators for fluid power applications
PD CEN/TR 15281:2006 PD CEN/TR 15281:2006. Guidance on inerting for the prevention of explosions
BS EN 60426:2007 BS EN 60426:2007. Electrical insulating materials. Determination of electrolytic corrosion caused by insuating materials. Test methods
BS EN 13234:2006 BS EN 13234:2006. Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Evaluation of the resistance to crack propagation by notch sensitivity testing
BS EN 1482-1:2007 BS EN 1482-1:2007. Fertilizers and liming materials. Sampling and sample preparation. Sampling
BS EN 755-1:2008 BS EN 755-1:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Technical conditions for inspection and delivery
BS EN ISO 4628-6:2007, BS 3900-H6:2007 BS EN ISO 4628-6:2007, BS 3900-H6:2007. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by tape method
BS EN 13235:2006 BS EN 13235:2006. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour
BS EN 1071-6:2007 BS EN 1071-6:2007. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test
BS EN 755-2:2008 BS EN 755-2:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
BS EN 755-4:2008 BS EN 755-4:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Square bars, tolerances on dimensions and form
BS EN 755-5:2008 BS EN 755-5:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Rectangular bars, tolerances on dimensions and form
BS EN 755-7:2008 BS EN 755-7:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Seamless tubes, tolerances on dimensions and form
BS EN 755-8:2008 BS EN 755-8:2008. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Porthole tubes, tolerances on dimensions and form
BS EN 12020-2:2008 BS EN 12020-2:2008. Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form
BS ISO 17382:2007 BS ISO 17382:2007. Oil of magnolia flower, China type (Michelia x alba DC)
BS ISO 11486:2006 BS ISO 11486:2006. Motorcycles. Methods for setting the running resistance on a chassis dynamometer
BS EN 61534-21:2006 BS EN 61534-21:2006. Powertrack systems. Particular requirements for powertrack systems intended for wall and ceiling mounting
BS EN ISO 5398-1:2007 BS EN ISO 5398-1:2007. Leather. Chemical determination of chromic oxide content. Quantification by titration
BS EN ISO 5398-3:2007 BS EN ISO 5398-3:2007. Leather. Chemical determination of chromic oxide content. Quantification by atomic absorption spectrometry
BS EN ISO 5398-4:2007 BS EN ISO 5398-4:2007. Leather. Chemical determination of chromic oxide content. Quantification by inductive coupled plasma-optical emission spectrometer (ICP-OES)
PD CEN ISO/TR 3834-6:2007 PD CEN ISO/TR 3834-6:2007. Quality requirements for fusion welding of metallic materials. Guidelines on implementing ISO 3834
BS EN ISO 105-E16:2007 BS EN ISO 105-E16:2007. Textiles. Tests for colour fastness. Colour fastness to water spotting on upholstery fabrics
BS ISO 11040-4:2007 BS ISO 11040-4:2007. Prefilled syringes . Glass barrels for injectables
BS ISO 14229:2006 BS ISO 14229:2006. Road vehicles. Unified diagnostic services (UDS). Specification and requirements
BS ISO 4252:2007 BS ISO 4252:2007. Agricultural tractors. Operator's workplace, access and exit. Dimensions
BS ISO 7635:2006 BS ISO 7635:2006. Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures
06/30136412 DC 06/30136412 DC. ISO 21299. Powered ride-on turf care equipment. Roll-over protective structures (ROPS). Test procedures and acceptance criteria
BS ISO 17577:2006 BS ISO 17577:2006. Steel. Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
BS EN 15307:2007 BS EN 15307:2007. Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
BS EN 15311:2007 BS EN 15311:2007. Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions
BS EN 754-1:2008 BS EN 754-1:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Technical conditions for inspection and delivery
BS ISO 23996:2007 BS ISO 23996:2007. Resilient floor coverings. Determination of density
BS ISO 23997:2007 BS ISO 23997:2007. Resilient floor coverings. Determination of mass per unit area
BS EN 754-2:2008 BS EN 754-2:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties
BS EN 754-3:2008 BS EN 754-3:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Round bars, tolerances on dimensions and form
BS EN 754-4:2008 BS EN 754-4:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Square bars, tolerances on dimensions and form
BS EN 1395-7:2007 BS EN 1395-7:2007. Thermal spraying. Acceptance inspection of thermal spraying equipment. Powder feed system
BS EN 754-6:2008 BS EN 754-6:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Hexagonal bars, tolerances on dimensions and form
BS EN 754-7:2008 BS EN 754-7:2008. Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Seamless tubes, tolerances on dimensions and form
BS EN ISO 2814:2006, BS 3900-D4:2006 BS EN ISO 2814:2006, BS 3900-D4:2006. Paints and varnishes. Comparison of contrast ratio (hiding power) of paints of the same type and colour
BS EN ISO 23747:2007 BS EN ISO 23747:2007. Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
PD CEN/TR 15278:2006 PD CEN/TR 15278:2006. Workplace exposure. Strategy for the evaluation of dermal exposure
PD CISPR/TR 16-4-5:2006 PD CISPR/TR 16-4-5:2006. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Conditions for the use of alternative test methods
BS EN 60309-4:2007 BS EN 60309-4:2007. Plugs, socket-outlets and couplers for industrial purposes. Switched socket-outlets and connectors, with or without interlock
BS ISO/IEC 16085:2006 BS ISO/IEC 16085:2006. Systems and software engineering. Life cycle processes. Risk management
PD IEC/TR 61948-4:2007 PD IEC/TR 61948-4:2007. Nuclear medicine instrumentation. Routine tests. Radionuclide calibrators
DD CEN/TS 15231:2006 DD CEN/TS 15231:2006. Open data communication in building automation, controls and building management. Mapping between Lonworks and BACnet
DD IEC/TS 62228:2007 DD IEC/TS 62228:2007. Integrated circuits. EMC evaluation of CAN transceivers
BS EN 61788-7:2006 BS EN 61788-7:2006. Superconductivity. Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencies
BS EN 15259:2007 BS EN 15259:2007. Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report
BS EN 15267-3:2007 BS EN 15267-3:2007. Air quality. Certification of automated measuring systems. Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
BS EN 3745-306:2005 BS EN 3745-306:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Variation of attenuation during temperature cycling
BS EN 3745-401:2005 BS EN 3745-401:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Accelerated ageing
BS EN 15265:2007 BS EN 15265:2007. Energy performance of buildings. Calculation of energy needs for space heating and cooling using dynamic methods. General criteria and validation procedures
BS ISO 17080:2005 BS ISO 17080:2005. Manually portable agricultural and forestry machines and powered lawn and garden equipment. Design principles for single-panel product safety labels
BS ISO 11783-1:2007 BS ISO 11783-1:2007. Tractors and machinery for agriculture and forestry. Serial control and communications data network. General standard for mobile data communication
BS ISO 11783-13:2007 BS ISO 11783-13:2007. Tractors and machinery for agriculture and forestry. Serial control and communications data network. File server
BS EN 15301-1:2007 BS EN 15301-1:2007. Surfaces for sports areas. Determination of rotational resistance
BS EN 15306:2007 BS EN 15306:2007. Surfaces for outdoor sports areas. Exposure of synthetic turf to simulated wear
BIP 2078:2007 BIP 2078:2007. Managing food safety the 22000 way
BS EN 15178:2007 BS EN 15178:2007. Elements for the identification of products in emergency enquiries
PD CEN/TR 15298:2006 PD CEN/TR 15298:2006. Foodstuffs. Sample comminution for mycotoxins analysis. Comparison between dry milling and slurry mixing
BS EN 2546:2006 BS EN 2546:2006. Aerospace series. Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods. Dimensions
BS EN 2327:2006 BS EN 2327:2006. Aerospace series. Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods. Dimensions
BS ISO 14488:2007 BS ISO 14488:2007. Particulate materials. Sampling and sample splitting for the determination of particulate properties
ISO6935-1 : 2007 EDTN2 ISO6935-1 : 2007 EDTN2. ISO6935-1 : 2007 Steel for the reinforcement of concrete. Part 1: Plain bars
ISO6935-2 : 2007 EDTN2 ISO6935-2 : 2007 EDTN2. ISO6935-2 : 2007 Steel for the reinforcement of concrete. Part 1: Ribbed bars
06/30137125 DC 06/30137125 DC. ISO 15011-3. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 3. Determination of ozone emission rate
BS EN 4421:2007 BS EN 4421:2007. Aerospace series. Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel. Strength class: 1 100 MPa (at ambient temperature)
BS EN 2335:2005 BS EN 2335:2005. Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads
BS EN 15232:2007 BS EN 15232:2007. Energy performance of buildings. Impact of building automation, controls and building management
BS EN 15384:2007 BS EN 15384:2007. Packaging. Flexible aluminium tubes. Test method to determine the porosity of the internal coating
BS EN 15385:2007 BS EN 15385:2007. Packaging. Flexible laminate tubes. Test methods to determine the strength of the head welding
BS EN 15386:2007 BS EN 15386:2007. Packaging. Flexible laminate and plastic tubes. Test method to determine the print adhesion
BS ISO 81060-1:2007 BS ISO 81060-1:2007. Non-invasive sphygmomanometers. Requirements and test methods for non-automated measurement type
ISO2321 : 2006 EDTN3 ISO2321 : 2006 EDTN3. ISO 2321 Rubber threads - Method of test
BS ISO 20828:2006 BS ISO 20828:2006. Road vehicles. Security certificate management
BS EN 61753-101-2:2006 BS EN 61753-101-2:2006. Fibre optic interconnecting devices and passive components performance standard. Fibre management systems for category C. Controlled environment
BS EN 1364-3:2006 BS EN 1364-3:2006. Fire resistance tests for non-loadbearing elements. Curtain walling. Full configuration (complete assembly)
DD ISO/TS 10465-1:2007 DD ISO/TS 10465-1:2007. Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Installation procedures
PD ISO/TR 10465-2:2007 PD ISO/TR 10465-2:2007. Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Comparison of static calculation methods
PD ISO/TR 10465-3:2007 PD ISO/TR 10465-3:2007. Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Installation parameters and application limits
ISO/IECTR23000-1 : 2007 EDTN1 ISO/IECTR23000-1 : 2007 EDTN1. ISO/IECTR23000-1 : 2007 Information technology - Multimedia application format (MPEG-A). Part 1 : Purpose for multimedia application formats
06/30137498 DC 06/30137498 DC. EN 415-9. Safety of packaging machines. Part 9. Noise measurement methods for packaging machines, packaging lines and auxiliary equipment. Grade 2 and 3 accuracy
BS ISO 11451-3:2007 BS ISO 11451-3:2007. Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. On-board transmitter simulation
BS ISO 19712-2:2007 BS ISO 19712-2:2007. Plastics. Decorative solid surfacing materials. Determination of properties. Sheet goods
ISO21415-2 : 2006 EDTN1 ISO21415-2 : 2006 EDTN1. ISO21415-2 : 2006 Wheat and wheat flour - Gluten content. Part 2 : Determination of wet gluten by mechanical means
BS EN 3745-402:2005 BS EN 3745-402:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Temperature cycling
BS EN 3745-404:2005 BS EN 3745-404:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal shock
BS EN 3745-406:2005 BS EN 3745-406:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cold bend test
BS EN 3745-407:2005 BS EN 3745-407:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Flammability
BS EN 3745-503:2005 BS EN 3745-503:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Scrape abrasion
BS EN 3745-513:2005 BS EN 3745-513:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Crush resistance
BS EN 3745-412:2005 BS EN 3745-412:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Humidity resistance
BS ISO 24497-2:2007 BS ISO 24497-2:2007. Non-destructive testing. Metal magnetic memory. General requirements
BS ISO 24497-1:2007 BS ISO 24497-1:2007. Non-destructive testing. Metal magnetic memory. Vocabulary
BS ISO 24497-3:2007 BS ISO 24497-3:2007. Non-destructive testing. Metal magnetic memory. Inspection of welded joints
BS EN ISO 24014-1:2007 BS EN ISO 24014-1:2007. Public transport. Interoperable fare management system. Architecture
PD CEN/TR 15299:2006 PD CEN/TR 15299:2006. Health informatics. Safety procedures for identification of patients and related objects
BS ISO 21501-2:2007 BS ISO 21501-2:2007. Determination of particle size distribution. Single particle light interaction methods. Light scattering liquid-borne particle counter
BS ISO 21501-3:2007 BS ISO 21501-3:2007. Determination of particle size distribution. Single particle light interaction methods. Light extinction liquid-borne particle counter
BS ISO 21501-4:2007 BS ISO 21501-4:2007. Determination of particle size distribution. Single particle light interaction methods. Light scattering airborne particle counter for clean spaces
BS ISO 14435:2005 BS ISO 14435:2005. Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry
BS 8476:2007 BS 8476:2007. Code of practice for the safe use of concrete pumps
BS EN 15312:2007 BS EN 15312:2007. Free access multi-sports equipment. Requirements, including safety, and test methods
BS 6465-3:2006 BS 6465-3:2006. Sanitary installations. Code of practice for the selection, installation and maintenance of sanitary and associated appliances
BS ISO 362-1:2007 BS ISO 362-1:2007. Measurement of noise emitted by accelerating road vehicles. Engineering method. M and N categories
BS EN 60976:2007 BS EN 60976:2007. Medical electrical equipment. Medical electron accelerators. Functional performance characteristics
06/30137794 DC 06/30137794 DC. ISO 24353. Hygrothermal performance of building materials and products. Determination of moisture adsorption/desorption properties in response to humidity variation
BS EN 13126-15:2008 BS EN 13126-15:2008. Building hardware. Requirements and test methods for windows and doors height windows. Rollers for horizontal sliding and sliding folding windows and doors
BS EN 13126-16:2008 BS EN 13126-16:2008. Building hardware. Requirements and test methods for windows and doors height windows. Hardware for Lift&Slide windows and doors
BS EN 13126-17:2008 BS EN 13126-17:2008. Building hardware. Requirements and test methods for windows and doors height windows. Hardware for Tilt&Slide windows and doors
BS ISO 3776-1:2006 BS ISO 3776-1:2006. Tractors and machinery for agriculture. Seat belts. Anchorage location requirements
BS ISO 9679:2006 BS ISO 9679:2006. Aerospace. Clamps for fluid systems. Test methods
BS ISO 12319:2006 BS ISO 12319:2006. Aerospace. 'P' (loop style) clamps. Procurement specification
DD IEC/TS 62215-2:2007 DD IEC/TS 62215-2:2007. Integrated circuits. Measurement of impulse immunity. Synchronous transient injection method
BS 8477:2007 BS 8477:2007. Code of practice for customer service
BS 9250:2007 BS 9250:2007. Code of practice for design of the airtightness of ceilings in pitched roofs
BS EN 62220-1-2:2007 BS EN 62220-1-2:2007. Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency. Detectors used in mammography
BS ISO 19072-2:2007 BS ISO 19072-2:2007. Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Test methods and general performance requirements
BS ISO 19072-1:2007 BS ISO 19072-1:2007. Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pocket interface definition
ISO16100-4 : 2006 EDTN1 ISO16100-4 : 2006 EDTN1. Industrial automation systems and integration - Manufacturing software capability profiling for interoperability -. Part 4: Conformance test methods, criteria and reports
BS EN 14561:2006 BS EN 14561:2006. Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2)
BS EN 14562:2006 BS EN 14562:2006. Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2)
PD CEN/TR 15314:2006 PD CEN/TR 15314:2006. Durability of wood and wood-based products. Quantitative determination of quaternary ammonium compounds in wood
BS EN 12691:2006 BS EN 12691:2006. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
BS ISO 12151-4:2007 BS ISO 12151-4:2007. Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6149 metric stud ends
BS ISO 12151-5:2007 BS ISO 12151-5:2007. Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-2 37° flared ends
BS EN 15320:2007 BS EN 15320:2007. Identification card systems. Surface transport applications. Interoperable public transport applications. Framework
BS EN 15319:2007 BS EN 15319:2007. General principles of design of fibrous (gypsum) plaster works
BS EN 15318:2007 BS EN 15318:2007. Design and application of gypsum blocks
PD ISO/IEC TR 14471:2007 PD ISO/IEC TR 14471:2007. Information technology. Software engineering. Guidelines for the adoption of CASE tools
08/30138102 DC 08/30138102 DC. BS ISO 25780. Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques
BS ISO 10110-7:2008 BS ISO 10110-7:2008. Optics and photonics. Preparation of drawings for optical elements and systems. Surface imperfection tolerances
BS ISO 9911:2006 BS ISO 9911:2006. Agricultural irrigation equipment. Manually operated small plastics valves
BS 8478:2006 BS 8478:2006. Respiratory protective devices. Breathing gases for diving and hyperbaric applications
BS EN 60034-8:2007 BS EN 60034-8:2007. Rotating electrical machines. Terminal markings and direction of rotation
BS EN 62271-109:2006 BS EN 62271-109:2006. High-voltage switchgear and controlgear. Alternating-current series capacitor by-pass switches
BS ISO 9635-2:2006 BS ISO 9635-2:2006. Agricultural irrigation equipment. Irrigation valves. Isolating valves
BS ISO 9635-3:2006 BS ISO 9635-3:2006. Agricultural irrigation equipment. Irrigation valves. Check valves
BS ISO 9635-4:2006 BS ISO 9635-4:2006. Agricultural irrigation equipment. Irrigation valves. Air valves
BS ISO 9635-5:2006 BS ISO 9635-5:2006. Agricultural irrigation equipment. Irrigation valves. Control valves
BS 7941-1:2006 BS 7941-1:2006. Methods for measuring the skid resistance of pavement surfaces. Sideway-force coefficient routine investigation machine
BS ISO 11783-3:2007 BS ISO 11783-3:2007. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Data link layer
BS EN 12592:2007, BS 2000-47:2007 BS EN 12592:2007, BS 2000-47:2007. Bitumen and bituminous binders. Determination of solubility
BS EN 1426:2007, BS 2000-49:2007 BS EN 1426:2007, BS 2000-49:2007. Bitumen and bituminous binders. Determination of needle penetration
BS EN 12593:2007, BS 2000-80:2007 BS EN 12593:2007, BS 2000-80:2007. Bitumen and bituminous binders. Determination of the Fraass breaking point
BS EN 12595:2007, BS 2000-319:2007 BS EN 12595:2007, BS 2000-319:2007. Bitumen and bituminous binders. Determination of kinematic viscosity
BS EN 12594:2007, BS 2000-461:2007 BS EN 12594:2007, BS 2000-461:2007. Bitumen and bituminous binders. Preparation of test samples
BS EN 12596:2007, BS 2000-222:2007 BS EN 12596:2007, BS 2000-222:2007. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary
BS EN 12606-1:2007, BS 2000-459.1:2007 BS EN 12606-1:2007, BS 2000-459.1:2007. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
BS EN 12607-1:2007, BS 2000-460.1:2007 BS EN 12607-1:2007, BS 2000-460.1:2007. Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RTFOT method
BS EN 12607-2:2007, BS 2000-460.2:2007 BS EN 12607-2:2007, BS 2000-460.2:2007. Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. TFOT Method
BS EN 12607-3:2007, BS 2000-460.3:2007 BS EN 12607-3:2007, BS 2000-460.3:2007. Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RFT Method
BS 4163:2007 BS 4163:2007. Health and safety for design and technology in schools and similar establishments. Code of practice
BS EN 14257:2006 BS EN 14257:2006. Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT '91)
BS EN 14459:2007 BS EN 14459:2007. Control functions in electronic systems for gas burners and gas burning appliances. Methods for classification and assessment
ISO/TR25901 : 2007 EDTN1 ISO/TR25901 : 2007 EDTN1. ISO/TR25901 : 2007 Welding and related processes. Vocabulary
BS EN 15323:2007, BS 2000-551:2007 BS EN 15323:2007, BS 2000-551:2007. Bitumen and bituminous binders. Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
DD CEN/TS 15325:2008 DD CEN/TS 15325:2008. Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
BS EN 15326:2007, BS 2000-549:2007 BS EN 15326:2007, BS 2000-549:2007. Bitumen and bituminous binders. Measurement of density and specific gravity. Capillary-stoppered pyknometer method
BS EN 13501-1:2007 BS EN 13501-1:2007. Fire classification of construction products and building elements. Classification using data from reaction to fire tests
BS EN 13501-2:2007 BS EN 13501-2:2007. Fire classification of construction products and building elements. Classification using data from fire resistance tests, excluding ventilation services
BS EN ISO 16276-2:2007 BS EN ISO 16276-2:2007. Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating. Cross-cut testing and X-cut testing
BS EN 60669-2-2:2006 BS EN 60669-2-2:2006. Switches for household and similar fixed electrical installations. Particular requirements. Electromagnetic remote-control switches (RCS)
BS EN 60669-2-3:2006 BS EN 60669-2-3:2006. Switches for household and similar fixed electrical installations. Particular requirements. Time delay switches (TDS)
BS EN ISO 18453:2005 BS EN ISO 18453:2005. Natural gas. Correlation between water content and water dew point
ISO/IEC25436 : 2006 EDTN1 ISO/IEC25436 : 2006 EDTN1. ISO/IEC25436 : 2006 Information technology - Eiffel: Analysis, design and programming language
BS 6195:2006 BS 6195:2006. Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads
BS EN 752:2008 BS EN 752:2008. Drain and sewer systems outside buildings
06/30138608 DC 06/30138608 DC. IEC 60601-2-56. Medical electrical equipment. Part 2-56. Particular requirements for basic safety and essential performance of screening thermographs for human febrile temperature screening
ISO/IEC14496-22 : 2007 EDTN1 ISO/IEC14496-22 : 2007 EDTN1. ISO/IEC14496-22 : 2007 Information technology -- Coding of audio-visual objects. Part 22: Open Font Format
BS ISO 4930:2006 BS ISO 4930:2006. Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150°C max.)
07/30138759 DC 07/30138759 DC. BS ISO 24613. Language resource management. Lexical markup framework (LMF)
08/30138762 DC 08/30138762 DC. BS EN ISO 11980. Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations
08/30138766 DC 08/30138766 DC. BS EN ISO 10940. Ophthalmic instruments. Fundus cameras
BS ISO 9233-1:2007 BS ISO 9233-1:2007. Cheese, cheese rind and processed cheese. Determination of natamycin content. Molecular absorption spectrometric method for cheese rind
BS ISO 9233-2:2007 BS ISO 9233-2:2007. Cheese, cheese rind and processed cheese. Determination of natamycin content. High-performance liquid chromatographic method for cheese, cheese rind and processed cheese
BS EN 62421:2007 BS EN 62421:2007. Electronics assembly technology. Electronic modules
BS ISO 8486-2:2007 BS ISO 8486-2:2007. Bonded abrasives. Determination and designation of grain size distribution. Microgrits F230 to F2000
BS EN 50470-1:2006 BS EN 50470-1:2006. Electricity metering equipment (a.c.). General requirements, tests and test conditions. Metering equipment (class indexes A, B and C)
BS EN 50470-2:2006 BS EN 50470-2:2006. Electricity metering equipment (a.c.). Particular requirements. Electromechanical meters for active energy (class indexes A and B)
BS EN 50470-3:2006 BS EN 50470-3:2006. Electricity metering equipment (a.c.). Particular requirements. Static meters for active energy (class indexes A, B and C)
BS ISO/IEC 14763-3:2006 BS ISO/IEC 14763-3:2006. Information technology. Implementation and operation of customer premises cabling. Testing of optical fibre cabling
DD 264:2007 DD 264:2007. Packaging. Braille and other formats for medicinal products
BS IEC 60671:2007 BS IEC 60671:2007. Nuclear power plants. Instrumentation and control systems important to safety. Surveillance testing
ISO12052 : 2006 EDTN1 ISO12052 : 2006 EDTN1. ISO 12052 Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management
BS EN 1504-7:2006 BS EN 1504-7:2006. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Reinforcement corrosion protection
DD CEN/TS 839:2008 DD CEN/TS 839:2008. Wood preservatives. Determination of the protective effectiveness against wood destroying basidiomycetes. Application by surface treatment
BS EN 15335:2007 BS EN 15335:2007. Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000°C
BS EN 61747-3:2006 BS EN 61747-3:2006. Liquid crystal display devices. Liquid crystal display (LCD) cells. Sectional specification
BS EN 225-1:2007 BS EN 225-1:2007. Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensions. Oil burner pumps
BS EN 225-2:2007 BS EN 225-2:2007. Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensions. Oil burner motors
BS EN 15332:2007 BS EN 15332:2007. Heating boilers. Energy assessment of hot water storage systems
BS EN 15334:2007 BS EN 15334:2007. Sanitary appliances. Methacrylic dispersions of high filler content
DD 263:2007 DD 263:2007. Intruder and hold-up alarm systems. Commissioning, maintenance and remote support. Code of practice
BS ISO 8331:2007 BS ISO 8331:2007. Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
BS EN 60286-3:2007 BS EN 60286-3:2007. Packaging of components for automatic handling. Packaging of surface mount components on continuous tapes
BS EN 61800-5-1:2007 BS EN 61800-5-1:2007. Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy
BS ISO 9841:2007 BS ISO 9841:2007. Oil of hyssop (Hyssopus officinalis L. ssp. officinalis)
BS ISO 3061:2008 BS ISO 3061:2008. Oil of black pepper (Piper nigrum L.)
ISO8124-2 : 2007 EDTN2 ISO8124-2 : 2007 EDTN2. ISO 8124-2 Safety of toys -. Part 2: Flammability
BS EN 12572-1:2007 BS EN 12572-1:2007. Artificial climbing structures. Safety requirements and test methods for ACS with protection points
BS ISO 15230:2007 BS ISO 15230:2007. Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration
ISO/TR14121-2 : 2007 EDTN1 ISO/TR14121-2 : 2007 EDTN1. ISO14121-2 : 2007 Safety of machinery. Risk assessment. Part 2. Practical guidance and examples of methods
BS EN 15339-2:2007 BS EN 15339-2:2007. Thermal spraying. Safety requirements for thermal spraying equipment. Gas control units
BS EN 15340:2007 BS EN 15340:2007. Thermal spraying. Determination of shear load resistance of thermally sprayed coatings
BS EN 14879-5:2007 BS EN 14879-5:2007. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Linings on concrete components
BS EN 14879-4:2007 BS EN 14879-4:2007. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Linings on metallic components
BS EN 15336:2007 BS EN 15336:2007. Adhesives. Determination of the time to rupture of bonded joints under static load
BS EN 15337:2007 BS EN 15337:2007. Adhesives. Determination of shear of anaerobic adhesives using pin-and-collar specimens
BS EN 445:2007 BS EN 445:2007. Grout for prestressing tendons. Test methods
BS EN 446:2007 BS EN 446:2007. Grout for prestressing tendons. Grouting procedures
BS EN 447:2007 BS EN 447:2007. Grout for prestressing tendons. Basic requirements
BS ISO/IEC 4909:2006 BS ISO/IEC 4909:2006. Identification cards. Financial transaction cards. Magnetic stripe data content for track 3
BS ISO/IEC 7813:2006 BS ISO/IEC 7813:2006. Information technology. Identification cards. Financial transaction cards
BS ISO/IEC 8484:2007 BS ISO/IEC 8484:2007. Information technology. Magnetic stripes on savingsbooks
BS EN 15602:2008 BS EN 15602:2008. Security service providers. Terminology
ISO/TR22676 : 2006 EDTN1 ISO/TR22676 : 2006 EDTN1. ISO 22676 Prosthetics - Testing of ankle-foot devices and foot units - Guidance on the application of the test loading conditions of ISO 22675 and on the design of appropriate test equipment
BS ISO 19332:2007 BS ISO 19332:2007. Oil of blue chamomile [Chamomilla recutita (L.) Rauschert syn. Matricaria chamomilla auct.]
BS EN 60079-17:2007 BS EN 60079-17:2007. Explosive atmospheres. Electrical installations inspection and maintenance
BS ISO 6771:2007 BS ISO 6771:2007. Aerospace. Fluid systems and components. Pressure and temperature classifications
BS ISO 22554:2007 BS ISO 22554:2007. Ships and marine technology. Propeller shaft revolution indicators. Electric type and electronic type
BS ISO 22555:2007 BS ISO 22555:2007. Ships and marine technology. Propeller pitch indicators
06/30139466 DC 06/30139466 DC. ISO 3046-4. Recipricating internal combustion engines. Performance. Part 4. Speed governing
BS ISO 11452-8:2007 BS ISO 11452-8:2007. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Immunity to magnetic fields
BS EN 581-3:2007 BS EN 581-3:2007. Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for tables
BS 1722-1:2006 BS 1722-1:2006. Fences. Specification for chain link fences
BS 1722-2:2006 BS 1722-2:2006. Fences. Specification for strained wire and wire mesh netting fences
BS 1722-5:2006 BS 1722-5:2006. Fences. Specification for close-boarded and wooden palisade fences
BS 1722-7:2006 BS 1722-7:2006. Fences. Specification for wooden post and rail fences
BS 1722-8:2006 BS 1722-8:2006. Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles
BS 1722-9:2006 BS 1722-9:2006. Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
BS 1722-10:2006 BS 1722-10:2006. Fences. Specification for anti-intruder fences in chain link and welded mesh
BS 1722-11:2006 BS 1722-11:2006. Fences. Specification for prefabricated wood panel fences
BS 1722-14:2006 BS 1722-14:2006. Fences. Specification for open mesh steel panel fences
BS 1722-17:2006 BS 1722-17:2006. Fences. Specification for electric security fences. Design, installation and maintenance
BS EN ISO 8750:2007 BS EN ISO 8750:2007. Spring-type straight pins. Coiled, standard duty
BS EN ISO 8751:2007 BS EN ISO 8751:2007. Spring-type straight pins. Coiled, light duty
BS ISO 23274:2007 BS ISO 23274:2007. Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
BS EN 50160:2007 BS EN 50160:2007. Voltage characteristics of electricity supplied by public distribution networks
BS ISO 7637-3:2007 BS ISO 7637-3:2007. Road vehicles. Electrical disturbances from conduction and coupling. Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
BS EN ISO 6647-1:2007 BS EN ISO 6647-1:2007. Rice. Determination of amylose content. Reference method
BS EN ISO 6647-2:2007 BS EN ISO 6647-2:2007. Rice. Determination of amylose content. Routine methods
BS ISO 19334:2006 BS ISO 19334:2006. Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis
BS EN 12059:2008 BS EN 12059:2008. Natural stone products. Dimensional stone work. Requirements
BS EN 12407:2007 BS EN 12407:2007. Natural stone test methods. Petrographic examination
BS EN 12440:2008 BS EN 12440:2008. Natural stone. Denomination criteria
BS EN 1337-3:2005 BS EN 1337-3:2005. Structural bearings. Elastomeric bearings
BS EN 1337-5:2005 BS EN 1337-5:2005. Structural bearings. Pot bearings
BS EN 60068-2-69:2007 BS EN 60068-2-69:2007. Environmental testing. Tests. Test Te. Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
BS EN 55012:2007 BS EN 55012:2007. Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers
BS ISO 15706-2:2007 BS ISO 15706-2:2007. Information and documentation. International Standard Audiovisual Number (ISAN). Version identifier
BS 25999-1:2006 (Paperback) BS 25999-1:2006 (Paperback). Business continuity management. Code of practice
DD CLC/TS 62441:2007 DD CLC/TS 62441:2007. Accidentally caused candle flame ignition for audio/video, communication and information technology equipment
BS EN 62258-5:2006 BS EN 62258-5:2006. Semiconductor die products. Requirements for information concerning electrical simulation
BS EN 62258-6:2006 BS EN 62258-6:2006. Semiconductor die products. Requirements for information concerning thermal simulation
BS ISO 9727-1:2007 BS ISO 9727-1:2007. Cylindrical cork stoppers. Physical tests. Determination of dimensions
BS ISO 9727-2:2007 BS ISO 9727-2:2007. Cylindrical cork stoppers. Physical tests. Determination of mass and apparent density for agglomerated cork stoppers
BS ISO 9727-3:2007 BS ISO 9727-3:2007. Cylindrical cork stoppers. Physical tests. Determination of humidity content
BS ISO 9727-4:2007 BS ISO 9727-4:2007. Cylindrical cork stoppers. Physical tests. Determination of dimensional recovery after compression
BS ISO 9727-5:2007 BS ISO 9727-5:2007. Cylindrical cork stoppers. Physical tests. Determination of extraction force
BS ISO 9727-6:2007 BS ISO 9727-6:2007. Cylindrical cork stoppers. Physical tests. Determination of liquid tightness
BS ISO 9727-7:2007 BS ISO 9727-7:2007. Cylindrical cork stoppers. Physical tests. Determination of dust content
ISO10364 : 2007 EDTN2 ISO10364 : 2007 EDTN2. ISO10364 : 2007 Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
PD CEN/TR 15350:2006 PD CEN/TR 15350:2006. Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery
BS ISO 5518:2007 BS ISO 5518:2007. Fruits, vegetables and derived products. Determination of benzoic acid content. Spectrophotometric method
BS EN 648:2006 BS EN 648:2006. Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
BS ISO 19813:2006 BS ISO 19813:2006. Road vehicles. Ignition systems. Test methods and requirements for high voltage boots on plug-top coils and pencil coils
BS EN 3155-071:2007 BS EN 3155-071:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3155-070:2007 BS EN 3155-070:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3475-506:2007 BS EN 3475-506:2007. Aerospace series. Cables, electrical, aircraft use. Test methods. Plating continuity
BS EN 3475-507:2007 BS EN 3475-507:2007. Aerospace series. Cables, electrical, aircraft use. Test methods. Adherence of plating
BS EN 3475-508:2007 BS EN 3475-508:2007. Aerospace series. Cables, electrical, aircraft use. Test methods. Plating thickness
BS EN 3475-514:2007 BS EN 3475-514:2007. Aerospace series. Cables, electrical, aircraft use. Test methods. Porosity of copper cladding on aluminium strands
BS EN 62226-3-1:2007 BS EN 62226-3-1:2007. Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body. Exposure to electric fields. Analytical and 2D numerical models
08/30140122 DC 08/30140122 DC. BS EN ISO 12706. Non-destructive testing. Vocabulary of terms used in penetrant testing
BS EN 61937-8:2007 BS EN 61937-8:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the Windows Media Audio (WMA) Professional format
BS EN 60958-3:2006 BS EN 60958-3:2006. Digital audio interface. Consumer applications
BS EN 1993-1-12:2007 BS EN 1993-1-12:2007. Eurocode 3. Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700
BS EN 50083-2:2006 BS EN 50083-2:2006. Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for equipment
BS EN 62025-1:2007 BS EN 62025-1:2007. High frequency inductive components. Non-electrical characteristics and measuring methods. Fixed, surface mounted inductors for use in electronic and telecommunication equipment
BS 8481:2006 BS 8481:2006. Design, preparation and application of internal gypsum, cement, cement and lime plastering systems. Specification
BS ISO 15242-4:2007 BS ISO 15242-4:2007. Rolling bearings. Measuring methods for vibration. Radial cylindrical roller bearings with cylindrical bore and outside surface
BS EN ISO 12944-5:2007 BS EN ISO 12944-5:2007. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Protective paint systems
BS ISO 212:2007 BS ISO 212:2007. Essential oils. Sampling
BS EN 62337:2007 BS EN 62337:2007. Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
BS EN 62381:2007 BS EN 62381:2007. Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
BS EN 62382:2007 BS EN 62382:2007. Electrical and instrumentation loop check
BS EN ISO 15181-1:2007 BS EN ISO 15181-1:2007. Paints and varnishes. Determination of release rate of biocides from antifouling paints. General method for extraction of biocides
BS EN ISO 15181-2:2007 BS EN ISO 15181-2:2007. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of copper-ion concentration in the extract and calculation of the release rate
BS EN 15341:2007 BS EN 15341:2007. Maintenance. Maintenance key performance indicators
BS 8480:2006 BS 8480:2006. Medical devices. Chairs with electrically operated support surfaces. Requirements
BS EN 3475-418:2007 BS EN 3475-418:2007. Aerospace series. Cables, electrical, aircraft use. Test methods. Thermal endurance for conductors
BS ISO 702-2:2007 BS ISO 702-2:2007. Machine tools. Connecting dimensions of spindle noses and work holding chucks. Camlock type
BS ISO 702-3:2007 BS ISO 702-3:2007. Machine tools. Connecting dimensions of spindle noses and work holding chucks. Bayonet type
BS EN ISO 21952:2007 BS EN ISO 21952:2007. Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel. Classification
BS EN 15378:2007 BS EN 15378:2007. Heating systems in buildings. Inspection of boilers and heating systems
BS EN 15377-3:2007 BS EN 15377-3:2007. Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Optimizing for use of renewable energy sources
BS ISO 16110-1:2007 BS ISO 16110-1:2007. Hydrogen generators using fuel processing technologies. Safety
BS EN 2588:2006 BS EN 2588:2006. Aerospace series. Bearings, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads
BS ISO 6534:2007 BS ISO 6534:2007. Forestry machinery. Portable chain-saw hand-guards. Mechanical strength
BS EN 2549:2006 BS EN 2549:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 2889:2006 BS EN 2889:2006. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 235°C
BS 5N 100-5:2006 BS 5N 100-5:2006. Aircraft oxygen systems and equipment. Guide to fire and explosion hazards associated with oxygen, including handling, storage and replenishment
BS EN 416-2:2006 BS EN 416-2:2006. Single burner gas-fired overhead radiant tube heaters for non-domestic use. Rational use of energy
BS ISO 18916:2007 BS ISO 18916:2007. Imaging materials. Processed imaging materials. Photographic activity test for enclosure materials
BS EN 2680:2006 BS EN 2680:2006. Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235°C
ISO17052 : 2007 EDTN1 ISO17052 : 2007 EDTN1. ISO17052 : 2007 Rubber, raw. Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography. Thermal desorption (dynamic headspace) method
BS EN 3475-302:2006 BS EN 3475-302:2006. Aerospace series. Cable, electrical, aircraft use. Test methods. Voltage proof test
BS EN 419-2:2006 BS EN 419-2:2006. Non-domestic gas-fired overhead luminous radiant heaters. Rational use of energy
BS EN ISO 4869-3:2007 BS EN ISO 4869-3:2007. Acoustics. Hearing protectors. Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
BS ISO 3846:2008 BS ISO 3846:2008. Hydrometry. Open channel flow measurement using rectangular broad-crested weirs
BS EN 3745-601:2007 BS EN 3745-601:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Smoke density
BS EN 3820:2006 BS EN 3820:2006. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
BS EN 4312:2006 BS EN 4312:2006. Aerospace series. Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C
BS ISO 21482:2007 BS ISO 21482:2007. Ionizing-radiation warning. Supplementary symbol
PD IEC/TR 62324:2007 PD IEC/TR 62324:2007. Single-mode optical fibres. Raman gain efficiency measurement using continuous wave method. Guidance
BS EN 15361:2007 BS EN 15361:2007. Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
ISO10972-5 : 2006 EDTN1 ISO10972-5 : 2006 EDTN1. ISO 10972-5 Cranes - Requirements for mechanisms -. Part 5: Bridge and gantry cranes
BS ISO 19933:2007 BS ISO 19933:2007. Space systems. Format for spacecraft launch environment test report
BS EN 15316-2-3:2007 BS EN 15316-2-3:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Space heating distribution systems
BS EN 15316-4-3:2007 BS EN 15316-4-3:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Heat generation systems, thermal solar systems
BS EN 15316-4-4:2007 BS EN 15316-4-4:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Heat generation systems, building-integrated cogeneration systems
BS EN 15316-4-5:2007 BS EN 15316-4-5:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Space heating generation systems, the performance and quality of district heating and large volume systems
BS EN 15316-4-6:2007 BS EN 15316-4-6:2007. Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Heat generation systems, photovoltaic systems
DD CEN/TS 15359:2006 DD CEN/TS 15359:2006. Solid recovered fuels. Specifications and classes
BS EN 60974-3:2007 BS EN 60974-3:2007. Arc welding equipment. Arc striking and stabilizing devices
BS ISO 15906:2007 BS ISO 15906:2007. Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability
BS EN 50463:2007 BS EN 50463:2007. Railway applications. Energy measurement on board trains
ISO15745-5 : 2007 EDTN1 ISO15745-5 : 2007 EDTN1. ISO15745-5 : 2007 Industrial automation systems and integration - Open systems application integration framework - . Part 5 : Reference description for HDLC-based control systems
BS ISO 10791-10:2007 BS ISO 10791-10:2007. Test conditions for machining centres. Evaluation of thermal distortions
BS ISO 8636-2:2007 BS ISO 8636-2:2007. Machine tools. Test conditions for bridge-type milling machines. Testing of the accuracy. Travelling bridge (gantry-type) machines
08/30141132 DC 08/30141132 DC. BS EN ISO 10423. Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
ISO10303-112 : 2006 EDTN 1 ISO10303-112 : 2006 EDTN 1. Industrial automation systems and integration - Product data representation and exchange -. Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models
BS EN 14390:2007 BS EN 14390:2007. Fire test. Large-scale room reference test for surface products
ISO7240-8 : 2007 EDTN1 ISO7240-8 : 2007 EDTN1. ISO 7240-8 : 2007 Fire detection and alarm systems -. Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
BS ISO 7240-8:2007 BS ISO 7240-8:2007. Fire detection and alarm systems. Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
BS ISO/IEC 26300:2006 BS ISO/IEC 26300:2006. Information technology. Open document format for office applications (OpenDocument) v1.0
BS EN 2647:2006 BS EN 2647:2006. Aerospace series. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235°C
BS EN 646:2006 BS EN 646:2006. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN ISO 8895:2006 BS EN ISO 8895:2006. Shaped insulating refractory products. Determination of cold crushing strength
BS EN 74-1:2005 BS EN 74-1:2005. Couplers, spigot pins and baseplates for use in falsework and scaffolds. Couplers for tubes. Requirements and test procedures
BS ISO 21630:2007 BS ISO 21630:2007. Pumps. Testing. Submersible mixers for wastewater and similar applications
BS ISO 21459:2006 BS ISO 21459:2006. Space data and information transfer systems. Proximity-1 space link protocol. Coding and synchronization sublayer
BS EN 50173-1:2007 BS EN 50173-1:2007. Information technology. Generic cabling systems. General requirements
BS EN 50173-2:2007 BS EN 50173-2:2007. Information technology. Generic cabling systems. Office premises
ISO15500-20 : 2007 EDTN1 ISO15500-20 : 2007 EDTN1. ISO15500-20 : 2007 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 20: Rigid fuel line in material other than stainless steel
BS EN 50173-4:2007 BS EN 50173-4:2007. Information technology. Generic cabling systems. Homes
BS EN 50173-5:2007 BS EN 50173-5:2007. Information technology. Generic cabling systems. Data centres
BS ISO 21460:2006 BS ISO 21460:2006. Space data and information transfer systems. Proximity-1 space link protocol. Physical layer
ISO26202 : 2007 EDTN1 ISO26202 : 2007 EDTN1. ISO26202 : 2007 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
DD CEN/TR 10347:2006 DD CEN/TR 10347:2006. Guidance for forming of structural steels in processing
BS EN 1507:2006 BS EN 1507:2006. Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage
BS EN ISO 19111:2007 BS EN ISO 19111:2007. Geographic information. Spatial referencing by coordinates
BS ISO/IEC 42010:2007 BS ISO/IEC 42010:2007. Systems and software engineering. Recommended practice for architectural description of software-intensive systems
BS EN 4617:2006 BS EN 4617:2006. Aerospace series. Recommended practices for standardizing company standards
BS EN 50478:2007 BS EN 50478:2007. Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite . Modem layer specification
06/30141610 DC 06/30141610 DC. ISO 20612. Water quality. Interlaboratory comparisons for proficiency testing of analytical testing laboratories
ISO/TS20612 : 2007 EDTN1 ISO/TS20612 : 2007 EDTN1. ISO/TS20612 : 2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
BS IEC 62342:2007 BS IEC 62342:2007. Nuclear power plants. Instrumentation and control systems important to safety. Management of ageing
BS EN 15270:2007 BS EN 15270:2007. Pellet burners for small heating boilers. Definitions, requirements, testing, marking
BS EN 60405:2007 BS EN 60405:2007. Nuclear instrumentation. Constructional requirements and classification of radiometric gauges
06/30141731 DC 06/30141731 DC. ISO 11484. Steel products. Employer's qualification system of non-destructive testing (NDT) personnel
BS EN 4429:2006 BS EN 4429:2006. Aerospace series. Textiles. Testing of narrow woven fabrics. Determination of warp bow
BS ISO 10251:2006 BS ISO 10251:2006. Copper, lead, zinc and nickel concentrates. Determination of mass loss of bulk material on drying
BS ISO 12743:2006 BS ISO 12743:2006. Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content
PD CEN/TR 15369:2006 PD CEN/TR 15369:2006. Postal services. Quality of service. Guide for the implementation of EN 14534, Measurement of the transit time of end-to-end services for bulk mail
BS EN 60194:2006 BS EN 60194:2006. Printed board design, manufacture and assembly. Terms and definitions
ISO10245-1 : 2008 EDTN2 ISO10245-1 : 2008 EDTN2. ISO10245 : 2008 Cranes - Limiting and indicating devices. Part 1: General
DD ISO/TS 24817:2006 DD ISO/TS 24817:2006. Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
PAS 77:2006 PAS 77:2006. IT Service Continuity Management. Code of Practice
PD CLC/TR 50501-1:2007 PD CLC/TR 50501-1:2007. Railway applications. Rolling stock. Intercommunication between vehicles and train/wayside. Data dictionary and rules for functional standardisation
BS EN 15380-1:2006 BS EN 15380-1:2006. Railway applications. Designation system for railway vehicles. General principles
BS EN 15380-2:2006 BS EN 15380-2:2006. Railway applications. Designation systemat for railway vehicles. Product groups
BS EN 15380-3:2006 BS EN 15380-3:2006. Railway applications. Designation system for railway vehicles. Designation of installation sites and locations
DD CEN/TS 15397:2006 DD CEN/TS 15397:2006. Wood preservatives. Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
ISO22965-1 : 2007 EDTN1 ISO22965-1 : 2007 EDTN1. ISO22965-1 : 2007 Concrete. Part 1: Methods for specifying and guidance for the specifier
ISO22965-2 : 2007 EDTN1 ISO22965-2 : 2007 EDTN1. ISO22965-2 : 2007 Concrete. Part 2. Specification of constituent materials, production of concrete and conformity of concrete
BS ISO 11076:2006 BS ISO 11076:2006. Aircraft. Ground-based de-icing/anti-icing methods with fluids
PD IEC/TR 61000-2-14:2006 PD IEC/TR 61000-2-14:2006. Electromagnetic compatibility (EMC). Environment. Overvoltages on public electricity distribution networks
BS EN 3155-053:2007 BS EN 3155-053:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female 053, type A, crimp, class S. Product standard
BS EN 3155-052:2007 BS EN 3155-052:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male 052, type A, crimp, class S. Product standard
BS EN 3155-046:2007 BS EN 3155-046:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, double crimping, class S. Product Standard
BS EN 3155-047:2007 BS EN 3155-047:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, double crimping, class S. Product standard
DD CEN/TS 15398:2006 DD CEN/TS 15398:2006. Resilient, textile and laminate floor coverings. Floor covering standard symbols
BS ISO 355:2007 BS ISO 355:2007. Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations
BS ISO 10285:2007 BS ISO 10285:2007. Rolling bearings. Sleeve type linear ball bearings. Boundary dimensions and tolerances
BS EN 12413:2007 BS EN 12413:2007. Safety requirements for bonded abrasive products
BS ISO 21849:2006 BS ISO 21849:2006. Aircraft and space. Industrial data. Product identification and traceability
BS ISO 25861:2007 BS ISO 25861:2007. Ships and marine technology. Navigation. Daylight signalling lamps
PD CEN/TR 15310-1:2006 PD CEN/TR 15310-1:2006. Characterization of waste. Sampling of waste materials. Guidance on selection and application of criteria for sampling under various conditions
BS ISO/IEC 15457-2:2007 BS ISO/IEC 15457-2:2007. Identification cards. Thin flexible cards. Magnetic recording technique
BS EN 15417:2006 BS EN 15417:2006. Gas-fired central heating boilers. Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW
BS EN 13203-1:2006 BS EN 13203-1:2006. Gas-fired domestic appliances producing hot water. Appliances not exceeding 70 kW heat input and 300 l water storage capacity. Assessment of performance of hot water deliveries
BS EN 1890:2006 BS EN 1890:2006. Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 15416-4:2006 BS EN 15416-4:2006. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Determination of open assembly time for one component polyurethane adhesives
BS EN 15416-5:2006 BS EN 15416-5:2006. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Determination of conventional pressing time
BS EN 60384-6:2005 BS EN 60384-6:2005. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors
BS EN 60384-6-1:2005 BS EN 60384-6-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed metallized polycarbonate film dielectric d.c. capacitors. Assessment level E
PD/ISO TR 24532:2006 PD/ISO TR 24532:2006. Intelligent transport systems. System architecture, taxonomy and terminology. Using CORBA (control object request broker architecture) in ITS standards, data registries and data dictionaries
PD IEC/TR 62456:2007 PD IEC/TR 62456:2007. An electrochemical reference system for use in different solvent media. The decamethylated ferricinium/ferrocene redox couple
BS EN ISO 14644-6:2007 BS EN ISO 14644-6:2007. Cleanrooms and associated controlled environments. Vocabulary
BS EN 60384-4:2007 BS EN 60384-4:2007. Fixed capacitors for use in electronic equipment. Sectional specification. Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
BS EN 60384-4-1:2007 BS EN 60384-4-1:2007. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed aluminium electrolytic capacitors with non-solid electrolyte. Assessment level EZ
BS EN 3716-001:2006 BS EN 3716-001:2006. Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data. Technical specification
BS EN 3716-003:2006 BS EN 3716-003:2006. Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data. Solder receptacle. Product standard
BS EN 3716-004:2006 BS EN 3716-004:2006. Aerospace series. Connectors, single-way with triaxial interface, for transmission of digital data. Solder plug. Product standard
BS EN 4199-001:2006 BS EN 4199-001:2006. Aerospace series. Bonding straps for aircraft. Technical specification
BS EN 15416-2:2007 BS EN 15416-2:2007. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Static load test of multiple bondline specimens in compression shear
BS EN 15425:2008 BS EN 15425:2008. Adhesives. One component polyurethane for load bearing timber structures. Classification and performance requirements
BS EN 3716-002:2006 BS EN 3716-002:2006. Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data. Conditions of use and list of product standards
BS EN 15429-1:2007 BS EN 15429-1:2007. Sweepers. Classification and Terminology
BS EN 15431:2008 BS EN 15431:2008. Winter and road service area maintenance equipments. Power system and related controls. Interchangeability and performance requirements
BS EN 15432:2008 BS EN 15432:2008. Winter and road service area maintenance equipments. Front-mounted equipments. Interchangeability
BS EN 4402:2006 BS EN 4402:2006. Aerospace series. Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
BS AU 223a:2006 BS AU 223a:2006. Design, construction performance and marking of vehicle support stands for cars and light vans. Specification
BS EN 2859:2006 BS EN 2859:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS EN 2888:2006 BS EN 2888:2006. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) / 425°C
BS EN 4509:2006 BS EN 4509:2006. Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1 100 MPa (at ambient temperature)/315°C
BS EN 4501:2006 BS EN 4501:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
06/30142607 DC 06/30142607 DC. ISO 9927-1. Cranes. Inspection. Part 1. General
BS EN 3545-005:2006 BS EN 3545-005:2006. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C. Male coding and attachment system for mounting on free housing (plug). Product standard
BS EN 3646-010:2006 BS EN 3646-010:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling. Operating temperature 175°C or 200°C continuous duty. Protective cover for plug. Product standard
BS EN 3646-003:2006 BS EN 3646-003:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Receptacle, square flange mounting. Product standard
BS EN 3646-004:2006 BS EN 3646-004:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Receptacle, jam-nut mounting. Product standard
BS EN 3646-005:2006 BS EN 3646-005:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Receptacle, hermetic, square flange mounting. Product standard
BS EN 3646-006:2006 BS EN 3646-006:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Receptacle, hermetic jam-nut mounting. Product standard
BS EN 3646-007:2006 BS EN 3646-007:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Receptacle, hermetic, round flange, welding or brazing mounting. Product standard
BS EN 3646-008:2006 BS EN 3646-008:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Plug. Product standard
BS EN 3646-009:2006 BS EN 3646-009:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Protective cover for receptacle. Product standard
BS ISO 2328:2007 BS ISO 2328:2007. Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions
BS ISO 20752:2007 BS ISO 20752:2007. Cork stoppers. Determination of releasable 2, 4, 6 trichloroanisol (TCA)
BS ISO 22662:2007 BS ISO 22662:2007. Milk and milk products. Determination of lactose content by high-performance liquid chromatography (Reference method)
BS EN 13203-2:2006 BS EN 13203-2:2006. Gas-fired domestic appliances producing hot water. Appliances not exceeding 70 kW heat input and 300 l water storage capacity. Assessment of energy consumption
BS EN 3218-001:2006 BS EN 3218-001:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Technical specification
BS EN 3218-002:2006 BS EN 3218-002:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Specification of performance and contact arrangements
BS EN 3218-005:2006 BS EN 3218-005:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Plug with non-removable size 22 solder contacts. Product standard
BS EN 3218-006:2006 BS EN 3218-006:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Receptacle with non-removable size 22 solder contacts. Product standard
BS EN 3218-007:2006 BS EN 3218-007:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Plug with rear-removable size 20 crimp contacts. Product standard
BS EN 3218-008:2006 BS EN 3218-008:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Receptacle with rear-removable size 20 crimp contacts. Product standard
BS EN 3218-009:2006 BS EN 3218-009:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Protective covers for EN 3218-005 and EN 3218-007 connectors. Product standard
BS EN 3218-010:2006 BS EN 3218-010:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Protective covers for EN 3218-006 and EN 3218-008 connectors. Product standard
BS EN 3218-011:2006 BS EN 3218-011:2006. Aerospace series. Connectors, rectangular, with metallic shells and screw-locking. Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors. Product standard
BS EN 2435-001:2006 BS EN 2435-001:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. Minimum requirements
BS EN 2435-002:2006 BS EN 2435-002:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance
BS EN 2435-003:2006 BS EN 2435-003:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance
BS EN 2435-004:2006 BS EN 2435-004:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance
BS EN 2436-002:2006 BS EN 2436-002:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion resistance
ISO/IEC21000-18 : 2007 EDTN1 ISO/IEC21000-18 : 2007 EDTN1. ISO/IEC 21000-18:2007 Information technology - Multimedia Framework (MPEG-21). Part 18: Digital Item Streaming
DD CEN/TS 15400:2006 DD CEN/TS 15400:2006. Solid recovered fuels. Methods for the determination of calorific value
DD CEN/TS 15401:2006 DD CEN/TS 15401:2006. Solid recovered fuels. Methods for the determination of bulk density
DD CEN/TS 15402:2006 DD CEN/TS 15402:2006. Solid recovered fuels. Methods for the determination of the content of volatile matter
DD CEN/TS 15403:2006 DD CEN/TS 15403:2006. Solid recovered fuels. Methods for the determination of ash content
DD CEN/TS 15404:2006 DD CEN/TS 15404:2006. Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures
DD CEN/TS 15405:2006 DD CEN/TS 15405:2006. Solid recovered fuels. Methods for the determination of density of pellets and briquettes
DD CEN/TS 15406:2006 DD CEN/TS 15406:2006. Solid recovered fuels. Methods for the determination of bridging properties of bulk materials
DD CEN/TS 15407:2006 DD CEN/TS 15407:2006. Solid recovered fuels. Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
DD CEN/TS 15410:2006 DD CEN/TS 15410:2006. Solid recovered fuels. Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
DD CEN/TS 15411:2006 DD CEN/TS 15411:2006. Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
DD CEN/TS 15412:2006 DD CEN/TS 15412:2006. Solid recovered fuels. Methods for the determination of metallic aluminium
DD CEN/TS 15413:2006 DD CEN/TS 15413:2006. Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
DD CEN/TS 15414-1:2006 DD CEN/TS 15414-1:2006. Solid recovered fuels. Determination of moisture content using the oven dry method. Determination of total moisture by a reference method
DD CEN/TS 15414-2:2006 DD CEN/TS 15414-2:2006. Solid recovered fuels. Determination of moisture content using the oven dry method. Determination of total moisture by a simplified method
DD CEN/TS 15414-3:2006 DD CEN/TS 15414-3:2006. Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
DD CEN/TS 15415:2006 DD CEN/TS 15415:2006. Solid recovered fuels. Determination of particle size and particle size distribution by screen method
BS EN ISO 13445:2006 BS EN ISO 13445:2006. Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
BS EN 50050:2006 BS EN 50050:2006. Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
BS EN ISO 5817:2007 BS EN ISO 5817:2007. Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
BS EN 13016-1:2007, BS 2000-394:2007 BS EN 13016-1:2007, BS 2000-394:2007. Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS EN 13016-2:2007, BS 2000-409:2007 BS EN 13016-2:2007, BS 2000-409:2007. Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40°C and 100°C
BS 7412:2007 BS 7412:2007. Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
BS EN 62391-1:2006 BS EN 62391-1:2006. Fixed electric double-layer capacitors for use in electronic equipment. Generic specification
BS EN 62391-2: 2006 BS EN 62391-2: 2006. Fixed electric double-layer capacitors for use in electronic equipment. Sectional specification. Electric double-layer capacitors for power application
BS EN 2881:2006 BS EN 2881:2006. Aerospace series. Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 120°C
BS EN 62391-2-1: 2006 BS EN 62391-2-1: 2006. Fixed electric double-layer capacitors for use in electronic equipment. Blank detail specification. Electric double-layer capacitors for power application. Assessment level EZ
BS EN 4494:2006 BS EN 4494:2006. Aerospace series. Rings, split, in stainless steel
BS EN 4111:2006 BS EN 4111:2006. Aerospace series. Wrenches, splined, sockets, for pipe fittings. Technical specification
BS ISO 21995:2008 BS ISO 21995:2008. Road vehicles. Test of vehicle air braking systems with a permissible mass of over 3,5 t. Acquisition and use of reference values using a roller brake tester
BS EN 15421:2007 BS EN 15421:2007. Packaging. Flexible aluminium tubes. Determination of the adhesion of the internal and external protective lacquering
BS EN 15433-6:2007 BS EN 15433-6:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loads. Automatic recording systems for measuring randomly occurring shock during monitoring of transports
PD IEC/TR 61282-8:2006 PD IEC/TR 61282-8:2006. Fibre optic communication system design guides. Calculating dispersion penalty from measured time-resolved chirp data
BS ISO 20773:2007 BS ISO 20773:2007. Cigarettes. Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke. Method using a routine analytical linear smoking machine equipped with a fishtail chimney
BS ISO 20774:2007 BS ISO 20774:2007. Cigarettes. Determination of carbon monoxide in sidestream smoke. Method using a routine analytical linear smoking machine equipped with a fishtail chimney
BS 7786:2006 BS 7786:2006. Specification for unsintered PTFE tapes for general use
BS ISO 8334:2007 BS ISO 8334:2007. Forestry machinery. Portable chain-saws. Determination of balance and maximum holding moment
06/30143321 DC 06/30143321 DC. ISO 7005-1. Metallic flanges. Part 1. Steel flanges
BS ISO 8943:2007 BS ISO 8943:2007. Refrigerated light hydrocarbon fluids. Sampling of liquefied natural gas. Continuous and intermittent methods
BS EN ISO 17695:2005 BS EN ISO 17695:2005. Footwear. Test methods for uppers. Deformability
BS ISO 12647-7:2007 BS ISO 12647-7:2007. Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Proofing processes working directly from digital data
BS EN 14908-3:2006 BS EN 14908-3:2006. Open data communication in building automation, controls and building management. Control network protocol. Power line channel specification
BS ISO 16702:2007 BS ISO 16702:2007. Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography
BS EN 14908-4:2006 BS EN 14908-4:2006. Open data communication in building automation, controls and building management. Control network protocol. IP communication
BS EN 61760-2:2007 BS EN 61760-2:2007. Surface mounting technology. Transportation and storage conditions of surface mounting devices (SMD). Application guide
BS EN ISO 105-J05:2007 BS EN ISO 105-J05:2007. Textiles. Tests for colour fastness. Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2)
ISO14469-2 : 2007 EDTN1 ISO14469-2 : 2007 EDTN1. ISO14469 : 2007 Road vehicles - Compressed natural gas (CNG) refuelling connector. Part 2:20 MPa (200 bar) connector, size 2
BS EN 61290-10-4:2007 BS EN 61290-10-4:2007. Optical amplifiers. Test methods. Multichannel parameters. Interpolated source subtraction method using an optical spectrum analyzer
BS EN 3682-001:2006 BS EN 3682-001:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous. Technical specification
BS EN 3708-001:2006 BS EN 3708-001:2006. Aerospace series. Modular interconnection systems. Terminal junction systems. Technical specification
BS EN 2436-001:2006 BS EN 2436-001:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Basic requirements
BS EN 2436-003:2006 BS EN 2436-003:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance
BS EN 2436-004:2006 BS EN 2436-004:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance
BS EN 2436-005:2006 BS EN 2436-005:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. For exterior use with surface preparation tolerance
BS ISO 26143:2007 BS ISO 26143:2007. Space data and information transfer systems. Space link extension(SLE). Return operational control fields service
BS ISO 22671:2007 BS ISO 22671:2007. Space data and information transfer systems. Space link extension (SLE). Forward communications link transmission unit (CLTU) service
BS ISO 22669:2007 BS ISO 22669:2007. Space data and information transfer systems. Space link extension (SLE). Return-all-frames service
BS ISO 24531:2007 BS ISO 24531:2007. Intelligent transport systems. System architecture, taxonomy and terminology. Using XML in ITS standards, data registries and data dictionaries
BS EN 60587:2007 BS EN 60587:2007. Electrical insulating materials used under severe ambient conditions. Test methods for evaluating resistance to tracking and erosion
BS ISO/IEC 18000-7:2008 BS ISO/IEC 18000-7:2008. Information technology. Radio frequency identification for item management. Parameters for active air interface communications at 433 MHz
BS ISO/IEC 15459-5:2007 BS ISO/IEC 15459-5:2007. Information technology. Unique identifiers. Unique identifier for returnable transport items (RTIs)
BS ISO/IEC 16390:2007 BS ISO/IEC 16390:2007. Information technology. Automatic identification and data capture techniques. Interleaved 2 of 5 bar code symbology specification
BS ISO/IEC 16388:2007 BS ISO/IEC 16388:2007. Information technology. Automatic identification and data capture techniques. Code 39 bar code symbology specification
BS ISO/IEC 15417:2007 BS ISO/IEC 15417:2007. Information technology. Automatic identification and data capture techniques. Code 128 bar code symbology specification
BS ISO 25981:2008 BS ISO 25981:2008. Road vehicles. Connectors for the electrical connection of towing and towed vehicles. Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
BS ISO 2017-2:2007 BS ISO 2017-2:2007. Mechanical vibration and shock. Resilient mounting systems. Technical information to be exchanged for the application of vibration isolation associated with railway systems
BS EN 13407:2006 BS EN 13407:2006. Wall-hung urinals. Functional requirements and test methods
BS ISO 12643-2:2007 BS ISO 12643-2:2007. Graphic technology. Safety requirements for graphic technology equipment and systems. Press equipment and systems
BS EN ISO 3954:2007 BS EN ISO 3954:2007. Powders for powder metallurgical purposes. Sampling
BS ISO 18515:2007 BS ISO 18515:2007. Carbonaceous materials for the production of aluminium. Cathode blocks and baked anodes. Determination of compressive strength
BS EN 12353:2006 BS EN 12353:2006. Chemical disinfectants and antiseptics. Preservation of test organisms used for the determination of bactericidal, sporicidal and fungicidal activity
BS EN 14035-5:2006 BS EN 14035-5:2006. Fireworks. Batteries and combinations. Specification and test methods
BS EN 15433-4:2007 BS EN 15433-4:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loads. Data evaluation
BS ISO 16883:2007 BS ISO 16883:2007. Packaging. Transport packages for dangerous goods. Test methods for large packagings
BS EN ISO 26082:2007 BS EN ISO 26082:2007. Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather
BS EN 15433-5:2007 BS EN 15433-5:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loads. Derivation of test specifications
BS ISO 22241-1:2006 BS ISO 22241-1:2006. Diesel engines. NOx reduction agent AUS 32. Quality requirements
BS EN 15433-2:2007 BS EN 15433-2:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loads. Data acquisition and general requirements for measuring equipment
BS EN 15433-1:2007 BS EN 15433-1:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loads. General requirements
BS EN 15433-3:2007 BS EN 15433-3:2007. Transportation loads. Measurement and evaluation of dynamic mechanical loads. Data validity check and data editing for evaluation
BS EN ISO 23910:2007 BS EN ISO 23910:2007. Leather. Physical and mechanical tests. Measurement of stitch tear resistance
BS ISO/IEC 24762:2008 BS ISO/IEC 24762:2008. Information technology. Security techniques. Guidelines for information and communications technology disaster recovery services
BS 7655-0:2006 BS 7655-0:2006. Specification for insulating and sheathing materials for cables. General introduction
ISO/IEC23000-3 : 2007 EDTN1 ISO/IEC23000-3 : 2007 EDTN1. ISO/IEC 23000-3 Information technology - Multimedia application format (MPEG-A) -. Part 3: MPEG photo player application format
BS EN ISO 11442:2006 BS EN ISO 11442:2006. Technical product documentation. Document management
BS EN 61915-1:2008 BS EN 61915-1:2008. Low-voltage switchgear and controlgear. Device profiles for networked industrial devices. General rules for the development of device profiles
ISO3573 : 2008 EDTN4 ISO3573 : 2008 EDTN4. ISO3573 : 2008 Hot-rolled carbon steel sheet of commercial and drawing qualities
PD CEN/TR 15371:2006 PD CEN/TR 15371:2006. Safety of toys. Replies to requests for interpretation of EN 71-1, EN 71 -2, and EN 71-8
PD ISO/TR 22221:2006 PD ISO/TR 22221:2006. Health informatics. Good principles and practices for a clinical data warehouse
BS EN 3059:2007 BS EN 3059:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated. Dimensions and loads
BS EN 3060:2007 BS EN 3060:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated. Dimensions and loads
BS EN 15426:2007 BS EN 15426:2007. Candles. Specification for sooting behaviour
BS EN 4033:2007 BS EN 4033:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9, reduced internal radial clearance. Dimensions and loads
BS EN 4034:2007 BS EN 4034:2007. Aerospace series. Bearings, airframe rolling. Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
ISO13856-3 : 2006 EDTN1 ISO13856-3 : 2006 EDTN1. ISO 13856-3 Safety of machinery - Pressure-sensitive protective devices -. Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices
BS EN 301:2006 BS EN 301:2006. Adhesives, phenolic and aminoplastic, for loading bearing timber structures. Classification and performance requirements
PAS 99:2006 PAS 99:2006. Specification of common management system requirements as a framework for integration
BS EN 60601-2-12:2006 BS EN 60601-2-12:2006. Medical electrical equipment. Particular requirements for the safety of lung ventilators. Critical care ventilators
BS ISO 13492:2007 BS ISO 13492:2007. Financial services. Key management related data element. Application and usage of ISO 8583 data elements 53 and 96
BS ISO 13491-1:2007 BS ISO 13491-1:2007. Banking. Secure cryptographic devices (retail). Concepts, requirements and evaluation methods
BS ISO 3442-3:2007 BS ISO 3442-3:2007. Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws. Power-operated chucks with serrated jaws
ISO3574 : 2008 EDTN4 ISO3574 : 2008 EDTN4. ISO 3574 Cold-reduced carbon steel sheet of commercial and drawing qualities
ISO4996 : 2007 EDTN4 ISO4996 : 2007 EDTN4. ISO4996 : 2007 Hot-rolled steel sheet of high yield stress structural quality
BS ISO 4960:2007 BS ISO 4960:2007. Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
BS ISO 4997:2007 BS ISO 4997:2007. Cold-reduced carbon steel sheet of structural quality
ISO5001 : 2007 EDTN4 ISO5001 : 2007 EDTN4. ISO 5001:2007 Cold-reduced carbon steel sheet for vitreous enamelling
ISO5002 : 2008 EDTN3 ISO5002 : 2008 EDTN3. ISO5002 : 2008 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
BS ISO 5954:2007 BS ISO 5954:2007. Cold-reduced carbon steel sheet according to hardness requirements
BS ISO/IEC 25001:2007 BS ISO/IEC 25001:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Planning and management
BS EN 3682-002:2006 BS EN 3682-002:2006. Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous. Specification of performance and contact arrangements
BS ISO/IEC 24744:2007 BS ISO/IEC 24744:2007. Software engineering. Metamodel for development methodologies
BS EN 3708-002:2006 BS EN 3708-002:2006. Aerospace series. Modular interconnection systems. Terminal junction systems. Performance specification
BS EN 3708-003:2006 BS EN 3708-003:2006. Aerospace series. Modular interconnection systems. Terminal junction systems. Removable feedback modules version, sealed. Product standard
BS EN 3708-004:2006 BS EN 3708-004:2006. Aerospace series. Modular interconnection systems. Terminal junction systems. Removable feedback modules version, unsealed. Product standard
BS EN 3708-005:2006 BS EN 3708-005:2006. Aerospace series. Modular interconnection systems. Terminal junction systems. Frames with accessories for feedback modules version, sealed and unsealed. Product standard
BS EN 2235:2006 BS EN 2235:2006. Aerospace series. Single and multicore electrical cables, screened and jacketed
BS EN 3155-012:2006 BS EN 3155-012:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 8, male, type D, solder, class R. Product standard
BS EN 3155-013:2006 BS EN 3155-013:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 8, female, type D, solder, class R. Product standard
BS EN 3155-022:2006 BS EN 3155-022:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, rectangular, male, type A, crimp, class R. Product standard
BS EN 3155-027:2006 BS EN 3155-027:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class R. Product standard
BS EN 3155-042:2006 BS EN 3155-042:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P. Product standard
BS EN 4056-001:2006 BS EN 4056-001:2006. Aerospace series. Cable ties for harnesses. Technical specification
BS EN 2713-002:2006 BS EN 2713-002:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened and jacketed. General
BS EN 2713-011:2006 BS EN 2713-011:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Silver plated copper screened (spiral) and jacketed, UV laser printable. Product standard
BS EN 3155-017:2006 BS EN 3155-017:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, relay base, female, type A, crimp, class P. Product standard
BS EN 3155-028:2006 BS EN 3155-028:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R. Product standard
BS EN 3155-029:2007 BS EN 3155-029:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R. Product standard
BS EN 3155-043:2006 BS EN 3155-043:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P. Product standard
BS EN 3155-004:2007 BS EN 3155-004:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class T. Product standard
ISO12466-1 : 2007 EDTN2 ISO12466-1 : 2007 EDTN2. ISO12466-1 : 2007 Plywood. Bonding quality . Part 1. Test methods
ISO12466-2 : 2007 EDTN2 ISO12466-2 : 2007 EDTN2. ISO12466-2 : 2007 Plywood. Bonding quality . Part 2. Requirements
BS EN ISO 1167-4:2007 BS EN ISO 1167-4:2007. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of assemblies
06/30144290 DC 06/30144290 DC. ISO 4499-1. Hardmetals. Metallographic determination of microstructure. Part 1. Photomicrographs and description
06/30144293 DC 06/30144293 DC. ISO 4499-2. Hardmetals. Metallographic determination of microstructure. Part 2. Measurement of WC grain size
BS ISO 23273-3:2006 BS ISO 23273-3:2006. Fuel cell road vehicles. Safety specifications. Protection of persons against electric shock
BS EN 61400-2:2006 BS EN 61400-2:2006. Wind turbines. Design requirements for small wind turbines
BS ISO 3776-2:2007 BS ISO 3776-2:2007. Tractors and machinery for agriculture. Seat belts. Anchorage strength requirements
BS ISO 11815:2007 BS ISO 11815:2007. Milk. Determination of total milk-clotting activity of bovine rennets
BS EN ISO 11979-6:2007 BS EN ISO 11979-6:2007. Ophthalmic implants. Intraocular lenses. Shelf-life and transport stability
BS ISO 4427-1:2007 BS ISO 4427-1:2007. Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. General
BS ISO 4427-2:2007 BS ISO 4427-2:2007. Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Pipes
BS EN 60641-1:2008 BS EN 60641-1:2008. Specification for pressboard and presspaper for electrical purposes. Definitions and general requirements
BS EN 15272-1:2007 BS EN 15272-1:2007. Inland navigation vessels. Equipment for rope leading. General requirements
BS EN 15272-4:2007 BS EN 15272-4:2007. Inland navigation vessels. Equipment for rope leading. Rope lead
PD IEC/TR 62316:2007 PD IEC/TR 62316:2007. Guidance for the interpretation of OTDR backscattering traces
BS ISO/IEC 7812-1:2006 BS ISO/IEC 7812-1:2006. Identification cards. Identification of issuers. Numbering system


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment