2009/09/07

Cheapest & Latest BSI Standard (PDF) (67)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS 6376-1:1983, ISO 6353-1:1982 BS 6376-1:1983, ISO 6353-1:1982. Reagents for chemical analysis. Methods of test
BS 6376-2:1984, ISO 6353-2:1983 BS 6376-2:1984, ISO 6353-2:1983. Reagents for chemical analysis. Specifications (first series)
BS 6392-0:1983 BS 6392-0:1983. Testing of ethanol for industrial use. General introduction
BS 6392-1:1983 BS 6392-1:1983. Testing of ethanol for industrial use. Method for detection of alkalinity or determination of acidity to phenolphthalein
BS 6392-2:1983 BS 6392-2:1983. Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in small amounts (photometric method)
BS 6392-3:1983 BS 6392-3:1983. Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method)
BS 6392-4:1983 BS 6392-4:1983. Testing of ethanol for industrial use. Method for determination of aldehydes content
BS 6392-5:1983 BS 6392-5:1983. Testing of ethanol for industrial use. Method of test for miscibility with water
BS 6392-6:1983 BS 6392-6:1983. Testing of ethanol for industrial use. Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method)
BS 6392-7:1983 BS 6392-7:1983. Testing of ethanol for industrial use. Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method)
BS 6392-8:1983 BS 6392-8:1983. Testing of ethanol for industrial use. Method for determination of esters content
BS 6392-9:1983 BS 6392-9:1983. Testing of ethanol for industrial use. Method for determination of permanganate time
BS 4285-1.2:1984 BS 4285-1.2:1984. Microbiological examination for dairy purposes. Guide to general procedures. Diluents, media and apparatus and their preparation and sterilization
BS 4285-1.3:1984 BS 4285-1.3:1984. Microbiological examination for dairy purposes. Guide to general procedures. Procedures for obtaining incubation conditions
BS 4285-2.1:1984 BS 4285-2.1:1984. Microbiological examination for dairy purposes. Methods of general application for enumeration of microorganisms. Enumeration of microorganisms by poured plate technique for colony count
BS 4285-2.3:1984 BS 4285-2.3:1984. Microbiological examination for dairy purposes. Methods of general application for enumeration of microorganisms. Enumeration of microorganisms by surface plate technique for colony count
BS 4285-2.6:1984 BS 4285-2.6:1984. Microbiological examination for dairy purposes. Methods of general application for enumeration of microorganisms. Enumeration of microorganisms by most probable number technique
BS 5586-1:1978, ISO 3591-1977 BS 5586-1:1978, ISO 3591-1977. Sensory analysis apparatus. Specification for wine-tasting glass
BS 6298:1982, ISO 6644-1981 BS 6298:1982, ISO 6644-1981. Methods for automatic sampling of cereals and milled cereal products by mechanical means
BS 6325:1982, ISO 6078-1982 BS 6325:1982, ISO 6078-1982. Glossary of terms relating to black tea
BS 6379-1:1983, ISO 4072-1982 BS 6379-1:1983, ISO 4072-1982. Sampling of coffee and coffee products. Method of sampling green coffee in bags
BS 6379-2:1984, ISO 6670:1983 BS 6379-2:1984, ISO 6670:1983. Sampling of coffee and coffee products. Methods of sampling instant coffee in cases with liners
BS 6379-3:1983, ISO 6666-1983 BS 6379-3:1983, ISO 6666-1983. Sampling of coffee and coffee products. Specification for a coffee trier for sampling green coffee
BS 6394-1:1983, ISO 5738-1980 BS 6394-1:1983, ISO 5738-1980. Trace elements in milk and milk products. Method for the determination of copper content (reference method)
BS 6324-1:1983 BS 6324-1:1983. Terms relating to surgical implants. Glossary of general medical terms
BS 6324-2:1983 BS 6324-2:1983. Terms relating to surgical implants. Glossary of terms relating to mechanics
BS 6324-3:1983 BS 6324-3:1983. Terms relating to surgical implants. Glossary of terms relating to materials
BS 6324-4:1983 BS 6324-4:1983. Terms relating to surgical implants. Glossary of orthopaedic surgical terms
BS 3618-1:1969 BS 3618-1:1969. Glossary of mining terms. Planning and surveying
BS 3618-2:1971 BS 3618-2:1971. Glossary of mining terms. Ventilation
BS 3618-3:1971 BS 3618-3:1971. Glossary of mining terms. Boring and exploration
BS 3618-4:1971 BS 3618-4:1971. Glossary of mining terms. Drainage
BS 3618-5:1971 BS 3618-5:1971. Glossary of mining terms. Geology
BS 3618-6:1972 BS 3618-6:1972. Glossary of mining terms. Drilling and blasting
BS 3618-8:1974 BS 3618-8:1974. Glossary of mining terms. Winning and working
BS 3618-9:1974 BS 3618-9:1974. Glossary of mining terms. Shafts and associated equipment
BS 3618-10:1967 BS 3618-10:1967. Glossary of mining terms. Transport
BS 3618-11:1967 BS 3618-11:1967. Glossary of mining terms. Strata control
BS 5367:1976 BS 5367:1976. Dimensions of coated abrasives
BS 5517:1977 BS 5517:1977. Specification for dimensions of metric long arbors and their accessories for milling machines
BS 5587:1978, ISO 5429:1977 BS 5587:1978, ISO 5429:1977. Specification for coated abrasives. Flap wheels with incorporated flanges or separate flanges. Designation and dimensions
BS 5739:1979 BS 5739:1979. Method of presentation of lubrication instructions for machine tools
BS 5831:1979, ISO 6104-1979 BS 5831:1979, ISO 6104-1979. Specification for designation and multilingual nomenclature for diamond or cubic boron nitride grinding wheels and saws
BS 5851:1980, ISO 6106-1979 BS 5851:1980, ISO 6106-1979. Specification for grain sizes of diamond or cubic boron nitride
BS 6386-2:1983, ISO 5414-2:1982 BS 6386-2:1983, ISO 5414-2:1982. Tool chucks with clamp screws for flatted parallel shanks. Specification for dimensions of taper shanks
BS 16:1974 BS 16:1974. Specification for telegraph material (insulators, pole fittings, etc.)
BS 185-1:1969 BS 185-1:1969. Glossary of aeronautical and astronautical terms. General
BS 185-2:1969 BS 185-2:1969. Glossary of aeronautical and astronautical terms. Motion of aircraft
BS 185-3:1969 BS 185-3:1969. Glossary of aeronautical and astronautical terms. Structures
BS 185-4:1969 BS 185-4:1969. Glossary of aeronautical and astronautical terms. Aerodynamics
BS 185-5:1969 BS 185-5:1969. Glossary of aeronautical and astronautical terms. Heavier-than-air aircraft (aerodynes)
BS 185-6:1970 BS 185-6:1970. Glossary of aeronautical and astronautical terms. Ballistic and guided missiles
BS 185-7:1969 BS 185-7:1969. Glossary of aeronautical and astronautical terms. Lighter-than-air aircraft (aerostats)
BS 185-8:1970 BS 185-8:1970. Glossary of aeronautical and astronautical terms. Power plant
BS 185-9:1970 BS 185-9:1970. Glossary of aeronautical and astronautical terms. Propellers
BS 185-10:1970 BS 185-10:1970. Glossary of aeronautical and astronautical terms. Auxiliary services
BS 185-13:1972 BS 185-13:1972. Glossary of aeronautical and astronautical terms. Air-traffic and ground services
BS 185-14:1972 BS 185-14:1972. Glossary of aeronautical and astronautical terms. Radiocommunication and radiolocation
BS 185-15:1972 BS 185-15:1972. Glossary of aeronautical and astronautical terms. Meteorology
BS 185-16:1973 BS 185-16:1973. Glossary of aeronautical and astronautical terms. Personnel
BS 185-17:1973 BS 185-17:1973. Glossary of aeronautical and astronautical terms. Aerospace medicine
BS 185-18:1970 BS 185-18:1970. Glossary of aeronautical and astronautical terms. Astronautics
BS 185:Index:1973 BS 185:Index:1973. Glossary of aeronautical and astronautical terms. Alphabetical index
BS 354:1961 BS 354:1961. Recommendations for photometric integrators
BS 1571-2:1975 BS 1571-2:1975. Specification for testing of positive displacement compressors and exhausters. Methods for simplified acceptance testing for air compressors and exhausters
BS 1904:1984, IEC 60751:1983 BS 1904:1984, IEC 60751:1983. Specification for industrial platinum resistance thermometer sensors
BS 2567:1972 BS 2567:1972. Specification for steel non-powered roller conveyors
BS 3166:1959 BS 3166:1959. Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20°F to 220°F ( -30°C to 105°C)
BS 3231:1960 BS 3231:1960. Specification for thermographs (bimetallic type) for air temperatures within the range 0°F to 140°F (-20°C to 60°C)
BS 3274:1960 BS 3274:1960. Specification for tubular heat exchangers for general purposes
BS 3417-1:1984, ISO 5673-1980 BS 3417-1:1984, ISO 5673-1980. Power take-off shafts and guards for tractors and machinery for agriculture and forestry. Specification for power take-off drive shafts
BS 3417:Part 2:1984, ISO 5674-1982 BS 3417:Part 2:1984, ISO 5674-1982. Power take-off shafts and guards for tractors and machinery for agriculture and forestry. Methods for testing guards
BS 3509:1962 BS 3509:1962. Specification for spirit level vials
BS 3648:1963 BS 3648:1963. Specification for cycle rear lamps
BS 3799:1974 BS 3799:1974. Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
BS 4084:1978 BS 4084:1978. Specification for UNJ threads, with controlled root radius, for aerospace: inch series
BS 4151:1967 BS 4151:1967. Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge)
BS 4208:1967 BS 4208:1967. Specification for carbon and low alloy steel containment structures for stationary nuclear power reactors
BS 4276:1968 BS 4276:1968. Specification for hard metal for wire, bar and tube drawing dies
BS 4358:1968 BS 4358:1968. Glossary of terms used in air gauging with notes on the technique
BS 4631:1970 BS 4631:1970. Specification for parking discs
BS 4654:1970 BS 4654:1970. Specification for hooks for lifting freight containers of up to 30 tonnes
BS 4669:1971 BS 4669:1971. Specification for an artificial ear of the wide band type for the calibration of earphones used in audiometry
BS 4687:1984, ISO 1275:1984 BS 4687:1984, ISO 1275:1984. Specification for extended pitch precision roller chains and chainwheels
BS 4779:1971 BS 4779:1971. Recommendations for measurement of the optical transfer function of optical devices
BS 4793:1972 BS 4793:1972. Recommendations for specifying the optical performance of lenses for television cameras
BS 5078:1974 BS 5078:1974. Specification for jig and fixture components
BS 5138:1974 BS 5138:1974. Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts
BS 5235:1975 BS 5235:1975. Specification for dial-type expansion thermometers
BS 5344:1985, ISO 2787-1984 BS 5344:1985, ISO 2787-1984. Methods for performance tests for rotary and percussive pneumatic tools
BS 5347:1976 BS 5347:1976. Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment
BS 5540-1:1978, ISO 3722-1976 BS 5540-1:1978, ISO 3722-1976. Specification for evaluating particulate contamination of hydraulic fluids. Qualifying and controlling of cleaning methods for sample containers
BS 5540-3:1978 BS 5540-3:1978. Specification for evaluating particulate contamination of hydraulic fluids. Methods of bottling fluid samples
BS 5543:1978, ISO 3753-1977 BS 5543:1978, ISO 3753-1977. Vacuum technology - graphical symbols
BS 5639-1:1978, ISO 2331-1974 BS 5639-1:1978, ISO 2331-1974. Fork arms for fork lift trucks. Vocabulary for hook-on type fork arms
BS 5639:Part 2:1978, ISO 2328-1977 BS 5639:Part 2:1978, ISO 2328-1977. Fork arms for fork lift trucks. Specification for mounting dimensions of hook-on type fork arms and fork carriers
BS 5639:Part 3:1978 BS 5639:Part 3:1978. Fork arms for fork lift trucks. Recommendations for dimensions of fork arms
BS 5639:Part 4:1978, ISO 2330-1974 BS 5639:Part 4:1978, ISO 2330-1974. Fork arms for fork lift trucks. Specification for technical characteristics and testing
BS 5639:Part 5:1978 BS 5639:Part 5:1978. Fork arms for fork lift trucks. Guide for inspection and repair of fork arms in service
BS 5667-1:1979, ISO 1819-1977 BS 5667-1:1979, ISO 1819-1977. Specification for continuous mechanical handling equipment - safety requirements. General
BS 5667-2:1979, ISO 5028-1977 BS 5667-2:1979, ISO 5028-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: pneumatic handling installations
BS 5667-3:1979, ISO 5029-1977 BS 5667-3:1979, ISO 5029-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: storage equipment fed by a pneumatic handling system
BS 5667-4:1979, ISO 5030-1977 BS 5667-4:1979, ISO 5030-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: mobile suction pipes suspended from derrick jibs used in pneumatic handling
BS 5667-5:1979, ISO 5031-1977 BS 5667-5:1979, ISO 5031-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: couplings and hose components used in pneumatic handling
BS 5667-6:1979, ISO 5032-1977 BS 5667-6:1979, ISO 5032-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: rotary feeders used in pneumatic handling
BS 5667-7:1979, ISO 5033-1977 BS 5667-7:1979, ISO 5033-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: rotary drum feeders and rotary vane feeders
BS 5667-8:1979, ISO 5034-1977 BS 5667-8:1979, ISO 5034-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: hand-operated power shovels
BS 5667-9:1979, ISO 5035-1977 BS 5667-9:1979, ISO 5035-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: bulk throwing machines
BS 5667-10:1979, ISO 5036-1977 BS 5667-10:1979, ISO 5036-1977. Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: vertical screw conveyors
BS 5667-11:1979, ISO 5037-1977 BS 5667-11:1979, ISO 5037-1977. Specification for continuous mechanical handling equipment - safety requirements. Unit loads: fixed slat conveyors (metal or wood) with horizontal shafts
BS 5667-12:1979, ISO 5038-1977 BS 5667-12:1979, ISO 5038-1977. Specification for continuous mechanical handling equipment - safety requirements. Unit loads: mobile slat conveyors (metal or wood) with horizontal shafts
BS 5667-13:1979, ISO 5039-1977 BS 5667-13:1979, ISO 5039-1977. Specification for continuous mechanical handling equipment. - safety requirements. Unit loads: arm elevators and push bar conveyors
BS 5667-14:1979, ISO 5040-1977 BS 5667-14:1979, ISO 5040-1977. Specification for continuous mechanical handling equipment - safety requirements. Unit loads: live roller conveyors (with positive or friction drive)
BS 5667-15:1979, ISO 5041-1977 BS 5667-15:1979, ISO 5041-1977. Specification for continuous mechanical handling equipment - safety requirements. Unit loads: crate-carrying chain conveyors having biplanar chains for flat-bottomed unit loads
BS 5667-16:1979, ISO 5042-1977 BS 5667-16:1979, ISO 5042-1977. Specification for continuous mechanical handling equipment - safety requirements. Unit loads: slat band chain conveyors
BS 5667-17:1979, ISO 5043-1977 BS 5667-17:1979, ISO 5043-1977. Specification for continuous mechanical handling equipment - safety requirements. Unit loads: continuous plate conveyors (horizontal)
BS 5667-18:1979 BS 5667-18:1979. Specification for continuous mechanical handling equipment - safety requirements. Conveyors and elevators with chain-elements - examples for guarding of nip points
BS 5667-19:1980 BS 5667-19:1980. Specification for continuous mechanical handling equipment - safety requirements. Belt conveyors - examples for guarding of nip points
BS 5671:1979, IEC 60545:1976 BS 5671:1979, IEC 60545:1976. Guide for commissioning, operation and maintenance of hydraulic turbines
BS 5776:1979 BS 5776:1979. Specification for powered stairlifts
BS 5777:1979, ISO 5766-1978 BS 5777:1979, ISO 5766-1978. Methods of test for verification of stability of pallet stackers and high lift platform trucks
BS 5778:1979, ISO 5767:1978 BS 5778:1979, ISO 5767:1978. Methods of test for verification of stability of industrial trucks operating in special condition of stacking with mast tilted forward
BS 5801:1979, ISO 4348-1978 BS 5801:1979, ISO 4348-1978. Specification for flat-top chains and associated chainwheels for conveyors
BS 5816:1979, ISO 3922-1977 BS 5816:1979, ISO 3922-1977. Specification for dimensions of rotary vane feeders for continuous mechanical handling equipment
BS 5829:1979, ISO 3287-1978 BS 5829:1979, ISO 3287-1978. Specification for control symbols for powered industrial trucks
BS 5860:1980, IEC 60607:1978 BS 5860:1980, IEC 60607:1978. Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method)
BS 5933:1980, ISO 6055-1979 BS 5933:1980, ISO 6055-1979. Specification for overhead guards for high-lift rider trucks
BS 5934:1980, ISO 5048:1979 BS 5934:1980, ISO 5048:1979. Method for calculation of operating power and tensile forces in belt conveyors with carrying idlers on continuous mechanical handling equipment
BS 5995:1980 BS 5995:1980. Methods of test for electrohydraulic servovalves
BS 5261-2:1976 BS 5261-2:1976. Copy preparation and proof correction. Specification for typographic requirements, marks for copy preparation and proof correction, proofing procedure
BS 4257:1967 BS 4257:1967. Specification for the dimensions of E-cores made of ferromagnetic oxides for use in telecommunication and allied electronic equipment.
BS 4505-1:1981, ISO 1745-1975 BS 4505-1:1981, ISO 1745-1975. Digital data transmission. Specification for basic mode control procedures
BS 4505-3:1981, ISO 1155-1978 BS 4505-3:1981, ISO 1155-1978. Digital data transmission. Method for use of longitudinal parity to detect errors in information messages
BS 4505-4:1971 BS 4505-4:1971. Digital data transmission. Basic mode control procedures. Code independent information transfer
BS 4505-6:1976 BS 4505-6:1976. Digital data transmission. Complements to the basic mode control procedures; recovery, abort and interrupt, multiple station selection
BS 4505-7:1976 BS 4505-7:1976. Digital data transmission. Basic mode control procedures; conversational information message transer
BS 4739-1:1979, IEC 60351-1:1976 BS 4739-1:1979, IEC 60351-1:1976. Method for expression of the properties of cathode-ray oscilloscopes. General
BS 4739-2:1979, IEC 60351-2:1976 BS 4739-2:1979, IEC 60351-2:1976. Method for expression of the properties of cathode-ray oscilloscopes. Storage oscilloscopes
BS 4808-1:1972 BS 4808-1:1972. Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. General requirements and tests
BS 4808-2:1972 BS 4808-2:1972. Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. Equipment wires with solid or stranded conductors, unscreened, single
BS 4808-3:1972 BS 4808-3:1972. Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. Cables and equipment wires, with solid or stranded conductors, screened, single
BS 4808-4:1974 BS 4808-4:1974. Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples
BS 4808-5:1973 BS 4808-5:1973. Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. Cables with solid or stranded conductors, screened and sheathed, one pair
BS 4846:1972 BS 4846:1972. Specification for resistors for traction purposes
BS 5148:1975 BS 5148:1975. Method for specifying the performance of stabilized power supply apparatus
BS 5575:1978, IEC 60503:1975 BS 5575:1978, IEC 60503:1975. Specification for spools for 1 in (25.4 mm) video magnetic tape
BS 5647:1979, IEC 60561:1976 BS 5647:1979, IEC 60561:1976. Specification for electro-acoustical measuring equipment for aircraft noise certification
BS 5648:1978 BS 5648:1978. Specification for screw cores made of magnetic oxides or iron powder
BS 5721:1979, IEC 60537:1976 BS 5721:1979, IEC 60537:1976. Specification for frequency weighting for the measurement of aircraft noise (D-weighting)
BS 5844:1980, ISO 5168-1978 BS 5844:1980, ISO 5168-1978. Methods of measurement of fluid flow: estimation of uncertainty of a flow-rate measurement
BS 5857-1.1:1980, ISO 2975-I:1974 BS 5857-1.1:1980, ISO 2975-I:1974. Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. General
BS 5857-1.2:1980, ISO 2975-II:1975 BS 5857-1.2:1980, ISO 2975-II:1975. Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. Constant rate injection method using non-radioactive tracers
BS 5857-1.3:1980, ISO 2975-III:1977 BS 5857-1.3:1980, ISO 2975-III:1977. Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. Constant rate injection method using radioactive tracers
BS 5857-1.4:1980, ISO 2975-VI:1977 BS 5857-1.4:1980, ISO 2975-VI:1977. Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. Transit time method using non-radioactive tracers
BS 5857-1.5:1980, ISO 2975-VII:1977 BS 5857-1.5:1980, ISO 2975-VII:1977. Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. Transit time method using radioactive tracers
BS 5857-2.1:1980, ISO 4053-I:1977 BS 5857-2.1:1980, ISO 4053-I:1977. Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of gas flow. General
BS 5857-2.4:1980, ISO 4053-IV:1978 BS 5857-2.4:1980, ISO 4053-IV:1978. Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of gas flow. Transit time method using radioactive tracers
BS 5938-1:1984, IEC 60367-1:1982 BS 5938-1:1984, IEC 60367-1:1982. Cores for inductors and transformers for telecommunications. Methods of measurement
BS 5938-2:1980, IEC 60367-2:1974,IEC 60367-2A:1976 BS 5938-2:1980, IEC 60367-2:1974,IEC 60367-2A:1976. Cores for inductors and transformers for telecommunications. Guide to the drafting of performance specifications
BS 5966:1980, IEC 60645:1979 BS 5966:1980, IEC 60645:1979. Specification for audiometers
BS 4341:Addendum No. 1:1971 BS 4341:Addendum No. 1:1971. Methods of test for formic acid
BS 2S 516:1969 BS 2S 516:1969. Specification for carbon-manganese steel sheet and strip (93/116 hbar)
BS 2S 517:1969 BS 2S 517:1969. Specification for carbon-manganese steel sheet and strip (116/131 hbar)
BS S 528:1970 BS S 528:1970. Specification for 23/14 chromium-nickel heat-resisting steel sheet and strip (titanium stabilized: 54 hbar) (elevated temperature properties not verified)
BS S 529:1970 BS S 529:1970. Specification for 23/14 chromium-nickel heat-resisting steel sheet and strip (niobium stabilized: 54 hbar) (elevated temperature properties not verified)
BS S 531:1970 BS S 531:1970. Specification for 24/17 chromium-nickel heat-resisting steel sheet and strip (niobium stabilized: 54 hbar) (elevated temperature properties not verified)
BS 2SP 47:1957 BS 2SP 47:1957. Single coil spring washers for aircraft
BS 2SP 68 to 2SP 71:1973 BS 2SP 68 to 2SP 71:1973. Specification for 100° countersunk precision head aluminium and aluminium alloy rivets
BS SP 76:1958 BS SP 76:1958. Snap head steel rivets for aircraft
BS 2SP 77 to 2SP 80:1973 BS 2SP 77 to 2SP 80:1973. Specification for snap head aluminium and aluminium alloy rivets
BS 2SP 81 and 2SP 82:1973 BS 2SP 81 and 2SP 82:1973. Specification for snap head high nickel-copper alloy rivets
BS 2SP 83 to 85:1973 BS 2SP 83 to 85:1973. Specification for mushroom head aluminium alloy rivets
BS SP 86:1959 BS SP 86:1959. 100° countersunk head steel rivets for aircraft
BS 2SP 87 and 2SP 88:1973 BS 2SP 87 and 2SP 88:1973. Specification for 100° countersunk head high nickel-copper alloy rivets
BS 3SP 89:1983, ISO 1002-1983 BS 3SP 89:1983, ISO 1002-1983. Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings
BS SP 90:1961 BS SP 90:1961. Specification for corrosion-resisting steel split cotter pins for aircraft
BS 2SP 91-92:1973 BS 2SP 91-92:1973. Specification for carbon steel worm drive clamps for aircraft
BS 2SP 93:1974 BS 2SP 93:1974. Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use
BS SP 94:1964 BS SP 94:1964. Specification for bronze oil-retaining bushes and thrust washers for aircraft
BS 2SP 95:1974 BS 2SP 95:1974. Specification for elastomeric grommets (polychloroprene) for aerospace use
BS 2SP 96:1982 BS 2SP 96:1982. Specification for internal retaining rings (imperial sizes)
BS 2SP 101-104:1956 BS 2SP 101-104:1956. Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads) for aircraft
BS SP 118:1958 BS SP 118:1958. Tie rods (Unified threads) for aircraft
BS SP 119 and SP 120:1957 BS SP 119 and SP 120:1957. High tensile steel fork joints (Unified threads) for aircraft
BS SP 121:1958 BS SP 121:1958. Collars for shear pins for aircraft
BS SP 122 to 125:1958 BS SP 122 to 125:1958. Washers for Unified hexagons for aircraft (primarily for packing purposes)
BS SP 126 and SP 127:1959 BS SP 126 and SP 127:1959. Washers for Unified hexagons for aircraft (primarily for facing purposes)
BS SP 128 to 133:1965 BS SP 128 to 133:1965. Specifications for wood screws for aircraft
BS SP 134 to SP 138:1968 BS SP 134 to SP 138:1968. Specification for copper beryllium crinkle washers
BS SP 139 and SP 140:1969 BS SP 139 and SP 140:1969. Specification for corrosion-resisting steel crinkle washers
BS SP 141:1970 BS SP 141:1970. Specification for design and performance requirements for toggle type panel fasteners
BS 2SP 142 and SP 143:1973 BS 2SP 142 and SP 143:1973. Specification for solid rivets with 100° countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials
BS SP 144-147:1971 BS SP 144-147:1971. Specification for corrosion resisting worm drive clamps for aircraft
BS 2SP 148-150:1979 BS 2SP 148-150:1979. Specification for Unified aluminium alloy washers
BS 2SP 151-153:1979 BS 2SP 151-153:1979. Specification for Unified alloy steel washers
BS 2SP 154-156:1979 BS 2SP 154-156:1979. Specification for Unified corrosion-resistant steel washers
BS 2SP 157-163:1973 BS 2SP 157-163:1973. Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials
BS SP 164:1978 BS SP 164:1978. Specification for design and performance requirements for turnlock, stud-type panel fasteners (metric series)
BS 2SP 170-171:1985 BS 2SP 170-171:1985. Specification for braided rubber cord assemblies for aerospace use
BS 6523:1984 BS 6523:1984. Specification for glass beakers for laboratory use
BS 6584:1985, ISO 4198-1984 BS 6584:1985, ISO 4198-1984. Guide for comparative testing of performance of detergents for hand dishwashing
BS 6471:1984 BS 6471:1984. Method for determination of the antimicrobial value of QAC disinfectant formulations
BS 6413-0:1983, ISO 6743-0:1981 BS 6413-0:1983, ISO 6743-0:1981. Lubricants, industrial oils and related products (class L). Classification (general)
BS 6413-1:1983, ISO 6743-1:1981 BS 6413-1:1983, ISO 6743-1:1981. Lubricants, industrial oils and related products (class L). Classification for family A (total loss systems)
BS 6413-2:1983, ISO 6743-2:1981 BS 6413-2:1983, ISO 6743-2:1981. Lubricants, industrial oils and related products (class L). Classification for family F (spindle bearings, bearings and associated clutches)
BS 6413-4:1983, ISO 6743/4-1982 BS 6413-4:1983, ISO 6743/4-1982. Lubricants, industrial oils and related products (class L). Classification for family H (hydraulic systems)
BS 6578:Part 1:1985, ISO 7376/1-1984 BS 6578:Part 1:1985, ISO 7376/1-1984. Laryngoscopic fittings. Specification for hook-on type handle-blade fittings
BS 6578:Part 2:1985, ISO 7376/2-1984 BS 6578:Part 2:1985, ISO 7376/2-1984. Laryngoscopic fittings. Specification for screw threads for miniature electric lamps and sockets
PD 6504:1983 PD 6504:1983. Medical information on human reaction to skin contact with hot surfaces
BS 6400:1985 BS 6400:1985. Specification for installation of domestic gas meters (2nd family gases)
BS 6505:1984 BS 6505:1984. Specification for rubber-type materials used for controls components for use with 1st, 2nd and 3rd family gases
BS 6404-1:1984 BS 6404-1:1984. Magnetic materials. Classification
BS 6479:1984 BS 6479:1984. Method for determination and verification of the effective depth of carburized and hardened cases in steels
BS 6481:1984 BS 6481:1984. Method for determination of effective depth of hardening of steel after flame or induction hardening
BS 6533:1984 BS 6533:1984. Guide to macroscopic examination of steel by etching with strong mineral acids
BS 6464:1984 BS 6464:1984. Specification for reinforced plastics pipes, fittings and joints for process plants
BS 5767:1979, ISO 5285-1978 BS 5767:1979, ISO 5285-1978. Guide for storage and handling of conveyor belts
BS 6449-2:1984, ISO 5794-2:1982 BS 6449-2:1984, ISO 5794-2:1982. Rubber compounding ingredients: precipitated, hydrated silica. Method for determination of physical properties in rubber (including test recipe)
BS 6515:1984 BS 6515:1984. Specification for polyethylene damp-proof courses for masonry
BS 6576:1985 BS 6576:1985. Code of practice for installation of chemical damp-proof courses
BS 6543:1985 BS 6543:1985. Guide to use of industrial by-products and waste materials in building and civil engineering
BS 6461-1:1984 BS 6461-1:1984. Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat). Code of practice for masonry chimneys and flue pipes
BS 6446:1984 BS 6446:1984. Specification for manufacture of glued structural components of timber and wood based panel products
BS 6566:Part 1:1985 BS 6566:Part 1:1985. Plywood. Specification for construction of panels and characteristics of plies including marking
BS 6566:Part 2:1985 BS 6566:Part 2:1985. Plywood. Glossary of terms
BS 6566:Part 3:1985 BS 6566:Part 3:1985. Plywood. Specification for acceptance levels for post-manufacture batch testing including sampling
BS 6566:Part 6:1985 BS 6566:Part 6:1985. Plywood. Specification for limits of defects for the classification of plywood by appearance
BS AU 182:1982 BS AU 182:1982. Specification for plastics safety glazing materials for use in road vehicles
BS AU 189:1983, ISO 4138-1982 BS AU 189:1983, ISO 4138-1982. Method of test for steady state cornering behaviour for road vehicles
BS AU 190:1983 BS AU 190:1983. Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg
BS AU 191:1983, ISO 6813-1981 BS AU 191:1983, ISO 6813-1981. Glossary of terms for road vehicle collisions
BS AU 192:1983, ISO 7237-1981 BS AU 192:1983, ISO 7237-1981. Glossary of terms for masses and dimensions of caravans
BS AU 194:1984 BS AU 194:1984. Specification for performance of electrical connections between towing vehicles and trailers
BS AU 196:1984 BS AU 196:1984. Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles
BS AU 197:1984 BS AU 197:1984. Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal)
BS AU 198:1984 BS AU 198:1984. Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary)
BS AU 199:1984, ISO 4040-1983 BS AU 199:1984, ISO 4040-1983. Specification for location of hand controls, indicators and tell-tales in passenger cars
BS AU 200-1a:1984 BS AU 200-1a:1984. Spray reducing devices for heavy goods vehicles. Specification for design of containment devices
BS AU 200-2a:1984 BS AU 200-2a:1984. Spray reducing devices for heavy goods vehicles. Specification for performance of suppression material and devices, and air/water separating material and devices
BS 500:1956 BS 500:1956. Specification for steel railway sleepers for flat bottom railway rails
BS 3818:1964 BS 3818:1964. Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
BS AU 153:1970 BS AU 153:1970. Specification for fuel injection high pressure pipe fittings
BS 6486:1984, ISO 7457-1983 BS 6486:1984, ISO 7457-1983. Method for measurement of turning dimensions of wheeled earthmoving machinery
BS 6490:1984, ISO 7852-1983 BS 6490:1984, ISO 7852-1983. Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery
BS 6574:1985, ISO 8152-1984 BS 6574:1985, ISO 8152-1984. Guide to training of mechanics concerned with the operation and maintenance of earth-moving machinery
BS 6544:1984, ISO 7891-1984 BS 6544:1984, ISO 7891-1984. Specification for holes in dozer end bits for earth moving machinery
BS 6342:1983 BS 6342:1983. Specification for 105 mm microcopying of technical drawings (single image, A6 size)
BS 6354:1983 BS 6354:1983. Method for measuring the screen luminance, contrast and reflectance of microform readers
BS 6359:1983 BS 6359:1983. Specification for dimensions and position of microfiche heading coating (colour stripe)
BS 6474:Part 1:1984, ISO 5426-1983 BS 6474:Part 1:1984, ISO 5426-1983. Coded character sets for bibliographic information interchange. Specification for extension of the Latin alphabet coded character set
BS 6474:Part 3:1984, ISO 6438-1983 BS 6474:Part 3:1984, ISO 6438-1983. Coded character sets for bibliographic information interchange. Specification for African coded character set
BS 6529:1984 BS 6529:1984. Recommendations for examining documents, determining their subjects and selecting indexing terms
BS 4532:1969 BS 4532:1969. Specification for snorkels and face masks
BS 5577:1984 BS 5577:1984. Specification for table cutlery
BS 6534:1984 BS 6534:1984. Method for quantitative determination of lead in tin coatings
BS 4139:1967 BS 4139:1967. Specification for safety requirements for perambulators (baby carriages)
BS 4792:1984 BS 4792:1984. Specification for safety requirements for pushchairs
BS 2609:Part 1:1979 BS 2609:Part 1:1979. Warp stop motions. Specification for dimensions of drop wires for mechanical and electrical warp stop motions
BS 2609:Part 2:1979, ISO 1150:1978 BS 2609:Part 2:1979, ISO 1150:1978. Warp stop motions. Specification for dimensions of closed-end drop wires for mechanical and electrical warp stop motions and automatic drawing-in machines
BS 3866:1979 BS 3866:1979. Specification for holes and shanks for buttons
BS 4981:1984 BS 4981:1984. Specification for Mondopoint footwear sizing and marking system
BS 6372:1983, ISO 6939-1982 BS 6372:1983, ISO 6939-1982. Method for determination of breaking strength of yarn from packages: skein method
BS 6383:1983, ISO 6173-1982 BS 6383:1983, ISO 6173-1982. Glossary of terms for open-end spinning machines
BS 6395:1983 BS 6395:1983. Method for numerical designation of fabric faults by visual inspection
BS 6451:1984 BS 6451:1984. Specification for netting and fibre rope load restraint systems in surface transport
BS 6453:1984 BS 6453:1984. Specification for performance of leathers for garments
BS 6476:1984 BS 6476:1984. Guide to garment quality and relevant British Standards
BS 6524:1984 BS 6524:1984. Method for determination of the surface resistivity of a textile fabric
BS 6526:1984 BS 6526:1984. Specification for domestic oven gloves
BS 6545:1984, ISO 6177-1983 BS 6545:1984, ISO 6177-1983. Specification for main dimensions of, and terminology for, cloth rollers in textile machinery
BS 6549:1984, ISO 5247-1983 BS 6549:1984, ISO 5247-1983. Glossary of terms for classification of weaving machines
BS 6504:1984 BS 6504:1984. Method for determination of water absorption of paper and board (Klemm method)
BS 6538-1:1985, ISO 5636-1:1984 BS 6538-1:1985, ISO 5636-1:1984. Air permeance of paper and board. Method for determination of air permeance: general aspects of testing
BS 6382-1:1983 BS 6382-1:1983. Flexible intermediate bulk containers. Specification for flexible intermediate bulk containers designed to be lifted from above by integral or detachable devices
BS 6407-1:1983 BS 6407-1:1983. Cage pallets for retail use. Specification for collapsible cage pallets rated at 300 kg
BS 6407-2:1984 BS 6407-2:1984. Cage pallets for retail use. Guide to the safe handling and use of collapsible cage pallets rated at 300 kg
BS 6455:1984 BS 6455:1984. Method for monitoring the levels of residual solvents in flexible packaging materials
BS 6489:1984 BS 6489:1984. Specification for headforms for use in the testing of protective helmets
BS 6466:1984 BS 6466:1984. Code of practice for design and installation of ceramic fibre furnace linings
BS 5700:1984 BS 5700:1984. Guide to process control using quality control chart methods and cusum techniques
BS 5703-1:1980 BS 5703-1:1980. Guide to data analysis and quality control using cusum techniques. Introduction to cusum charting
BS 5703-2:1980 BS 5703-2:1980. Guide to data analysis and quality control using cusum techniques. Decision rules and statistical tests for cusum charts and tabulations
BS 5703-3:1981 BS 5703-3:1981. Guide to data analysis and quality control using cusum techniques. Cusum methods for process/quality control by measurement
BS 5703-4:1982 BS 5703-4:1982. Guide to data analysis and quality control using cusum techniques. Cusums for counted/attributes data
BS 6065:1981, ISO 5022-1979 BS 6065:1981, ISO 5022-1979. Methods for sampling and acceptance testing of shaped refractory products
BS 6434:1984 BS 6434:1984. Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
BS 5904:1980 BS 5904:1980. Specification for computer programming language RTL/2
BS 5905:1980 BS 5905:1980. Specification for computer programming language CORAL 66
BS 6154:1981 BS 6154:1981. Method of defining syntactic metalanguage
BS 3900:Part F12:1985, ISO 7253-1984 BS 3900:Part F12:1985, ISO 7253-1984. Methods of test for paint. Durability tests on paint films. Determination of resistance to neutral salt spray
BS 6244:1982, ISO 5388-1981 BS 6244:1982, ISO 5388-1981. Code of practice for stationary air compressors
BS 6275-1:1982, ISO 4572-1981 BS 6275-1:1982, ISO 4572-1981. Hydraulic fluid power filter elements. Method of evaluating filtration performance (multi-pass method)
BS 6275:Part 2:1984 BS 6275:Part 2:1984. Hydraulic fluid power filter elements. Methods of test to verify structural integrity
BS 6277:1982, ISO 3968-1981 BS 6277:1982, ISO 3968-1981. Method for determination of pressure drop/flow characteristics of hydraulic fluid power filters
BS 6327:1982, ISO 6826:1982 BS 6327:1982, ISO 6826:1982. Specification for fire protection of reciprocating internal combustion engines
BS 6494:Part 1:1984, ISO 4401-1980 BS 6494:Part 1:1984, ISO 4401-1980. Hydraulic fluid power valve mounting surfaces. Specification for four-port directional control valves
BS 6525:1984 BS 6525:1984. Specification for design and construction of reservoirs used in hydraulic fluid power systems
BS 6537:1984 BS 6537:1984. Specification for staple typeconnectors for hydraulic fluid power applications
BS 6560:1984, ISO 5593-1984 BS 6560:1984, ISO 5593-1984. Glossary of terms for rolling bearings
BS 6318-1:1982, ISO 7190-1981 BS 6318-1:1982, ISO 7190-1981. Bucket elevators. Classification of bucket elevators
BS 6318-2:1982, ISO 5050-1981 BS 6318-2:1982, ISO 5050-1981. Bucket elevators. Specification for dimensions of vertical bucket elevators with calibrated round steel link chains
BS 6318-3:1982, ISO 5051-1981 BS 6318-3:1982, ISO 5051-1981. Bucket elevators. Specification for dimensions of deep elevator bucket with flat rear wall
BS 6405:1984 BS 6405:1984. Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2
BS 6521:1984, ISO 7592-1983 BS 6521:1984, ISO 7592-1983. Guide for proper use and maintenance of calibrated round steel link lifting chains
BS 6347-2:1983, ISO 789-2:1983 BS 6347-2:1983, ISO 789-2:1983. Performance assessment of agricultural tractors. Methods for determination of hydraulic power and lifting capacity
BS 6347-3:1983, ISO 789-3:1982 BS 6347-3:1983, ISO 789-3:1982. Performance assessment of agricultural tractors. Method for determination of turning and clearance diameters
BS 6355:1983, ISO 5681:1981 BS 6355:1983, ISO 5681:1981. Glossary of terms for equipment for crop protection
BS 6356:Part 1:1983, ISO 5682/1-1981 BS 6356:Part 1:1983, ISO 5682/1-1981. Spraying equipment for crop protection. Method of test for sprayer nozzles
BS 6384:1983, ISO 5697-1982 BS 6384:1983, ISO 5697-1982. Methods for determination of braking performance of agricultural and forestry vehicles
BS 6389:1983, ISO 5721-1981 BS 6389:1983, ISO 5721-1981. Methods for determination of operator's field of vision for agricultural tractors
BS 6483-1:1984, ISO 5690-1:1982 BS 6483-1:1984, ISO 5690-1:1982. Fertilizer distributors. Methods of evaluating performance under laboratory and field conditions
BS 6508:1984, ISO 4004-1983 BS 6508:1984, ISO 4004-1983. Recommendations for track widths for agricultural tractors and machinery
BS 6509:1984, ISO 2332:1983 BS 6509:1984, ISO 2332:1983. Specification for clearance zone on implements for the three-point linkage to agricultural tractors
BS 6102-2:1982 BS 6102-2:1982. Cycles. Specification for photometric and physical requirements of reflective devices
BS 6102-7:1982, ISO 6693:1981 BS 6102-7:1982, ISO 6693:1981. Cycles. Specification for cotter pins and assembly of the axle/cotter pin/crank
BS 6202:1982, ISO 3649-1980 BS 6202:1982, ISO 3649-1980. Glossary of terms for cleaning equipment for air or other gases
BS 6468:1984 BS 6468:1984. Specification for depth micrometers
BS 6487:1984, ISO 7378-1983 BS 6487:1984, ISO 7378-1983. Specification for split pin holes and wire holes in bolts, screws and studs
BS 6511:1984, ISO 7806-1983 BS 6511:1984, ISO 7806-1983. Specification for designation of perforations in industrial plate screens
BS 6528:1984, ISO 5408-1983 BS 6528:1984, ISO 5408-1983. Glossary of terms for cylindrical screw threads
BS 6567:1985, ISO 4753-1983 BS 6567:1985, ISO 4753-1983. Specification for ends of fasteners with external metric ISO thread
BS 6587:1985 BS 6587:1985. Method of acceptance inspection for fasteners
BS 6374-2:1984 BS 6374-2:1984. Lining of equipment with polymeric materials for the process industries. Specification for lining with non-sheet applied thermoplastics
BS 6374-3:1984 BS 6374-3:1984. Lining of equipment with polymeric materials for the process industries. Specification for lining with stoved thermosetting resins
BS 6374-4:1984 BS 6374-4:1984. Lining of equipment with polymeric materials for the process industries. Specification for lining with cold curing thermosetting resins
PD 6510:1983 PD 6510:1983. A review of the present state of the art of assessing remanent life of pressure vessels and pressurized systems designed for high temperature service
BS 6503:1984 BS 6503:1984. Specification for handheld blowpipes, mixers and nozzles, using fuel gas and oxygen, for gas welding, cutting and related processes
BS 3593:1963 BS 3593:1963. Recommendation on preferred frequencies for acoustical measurements
BS 5330:1976 BS 5330:1976. Method of test for estimating the risk of hearing handicap due to noise exposure
BS 5331:1976 BS 5331:1976. Method of test for measurement of the physical properties of sonic bangs
BS 5727:1979, ISO 3891-1978 BS 5727:1979, ISO 3891-1978. Method for describing aircraft noise heard on the ground
BS 6086:1981, ISO 5128-1980 BS 6086:1981, ISO 5128-1980. Method of measurement of noise inside motor vehicles
BS 2808:1969 BS 2808:1969. Specification for artists' water-colour brushes for local authorities
BS 3375:Part 1:1984 BS 3375:Part 1:1984. Work study and organization and methods (O & M). Guide to organization study
BS 5478-2:1977, ISO 3792-1976 BS 5478-2:1977, ISO 3792-1976. Calculators and adding machines. Layout of function keys on adding machines
BS 5614:1978 BS 5614:1978. Specification for round sealed metal cans for motor oil and allied products
BS 6358:1983, ISO 5799:1981 BS 6358:1983, ISO 5799:1981. Method for determination of ISO speed and average gradient of direct-exposure medical and dental radiographic film/process combinations
BS 6456:1983, ISO 6924:1983 BS 6456:1983, ISO 6924:1983. Glossary of terms for correspondence envelopes
BS 6460-1:1983 BS 6460-1:1983. Accreditation of testing laboratories. Specification of the general requirements for the technical competence of testing laboratories
BS 6043:Part 1:Section 1.6:1984, ISO 6998-1984 BS 6043:Part 1:Section 1.6:1984, ISO 6998-1984. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value
BS 6100-3.2.1:1984 BS 6100-3.2.1:1984. Glossary of building and civil engineering terms. Services. Internal communication and transport. Internal communication
BS 6100-4.2:1984 BS 6100-4.2:1984. Glossary of building and civil engineering terms. Forest products. Sizes and quantities of solid timber
BS 6100-4.3:1984 BS 6100-4.3:1984. Glossary of building and civil engineering terms. Forest products. Wood based panel products
PD 6497:1982 PD 6497:1982. Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982
BS 5T 2:1972 BS 5T 2:1972. Specification for 4/1 nickel-chromium steel tube (1300 N/mm2)
BS 4T 45:1972 BS 4T 45:1972. Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable)
BS 3T 53:1980 BS 3T 53:1980. Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
BS 2T 57:1972 BS 2T 57:1972. Specification for 4/1 nickel-chromium steel tube (1150 N/mm2)
BS 3T 60:1980 BS 3T 60:1980. Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
BS T 64:1972 BS T 64:1972. Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable)
BS 2T 66:1980 BS 2T 66:1980. Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
BS T 67:1972 BS T 67:1972. Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm2) (weldable)
BS 2T 68:1980 BS 2T 68:1980. Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
BS T 69:1972 BS T 69:1972. Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm2) (weldable)
BS T 72-T 73:1977 BS T 72-T 73:1977. Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)
BS T 74:1972 BS T 74:1972. Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel tube (500 N/mm2)
BS T 75:1972 BS T 75:1972. Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel tube (500 N/mm2)
BS T 76:1978 BS T 76:1978. Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
BS T 77:1980 BS T 77:1980. Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
BS 3T 100:1978 BS 3T 100:1978. Procedure for inspection and testing of steel tubes
BS 2TA 3:1973 BS 2TA 3:1973. Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mm2)
BS 2TA 4:1973 BS 2TA 4:1973. Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm2)
BS 2TA 5:1973 BS 2TA 5:1973. Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm2)
BS 2TA 7:1973 BS 2TA 7:1973. Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mm2)
BS 2TA 8:1973 BS 2TA 8:1973. Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm2)
BS 2TA 9:1973 BS 2TA 9:1973. Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm2)
BS 2TA 10:1974 BS 2TA 10:1974. Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
BS 2TA 11:1974 BS 2TA 11:1974. Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 12:1974 BS 2TA 12:1974. Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 13:1974 BS 2TA 13:1974. Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 22:1973 BS 2TA 22:1973. Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm2)
BS 2TA 23:1973 BS 2TA 23:1973. Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm2)
BS 2TA 24:1973 BS 2TA 24:1973. Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm2)
BS 2TA 28:1974 BS 2TA 28:1974. Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners complying with the requirements of the 'A' series of British Standards)
BS TA 38:1971 BS TA 38:1971. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm2) (limiting ruling section 25 mm)
BS TA 39:1971 BS TA 39:1971. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm2) (limiting ruling section 25 mm)
BS TA 40:1971 BS TA 40:1971. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm)
BS TA 41:1971 BS TA 41:1971. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm)
BS TA 42:1971 BS TA 42:1971. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm)
BS TA 43:1972 BS TA 43:1972. Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
BS TA 44:1972 BS TA 44:1972. Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
BS TA 45:1973 BS TA 45:1973. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 N/mm2) (limiting ruling section 25 mm)
BS TA 46:1973 BS TA 46:1973. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section over 25 mm up to and including 100 mm)
BS TA 47:1973 BS TA 47:1973. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section 100 mm)
BS TA 48:1973 BS TA 48:1973. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm2) (limiting ruling section 100 mm)
BS TA 49:1973 BS TA 49:1973. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
BS TA 50:1973 BS TA 50:1973. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
BS TA 51:1973 BS TA 51:1973. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm)
BS TA 52:1973 BS TA 52:1973. Specification for sheet and strip of titanium-copper alloy (tensile strength 690-920 N/mm2)
BS TA 53:1973 BS TA 53:1973. Specification for bar and section for machining of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 54:1973 BS TA 54:1973. Specification for forging stock of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 55:1973 BS TA 55:1973. Specification for forgings of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 56:1974 BS TA 56:1974. Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS TA 57:1974 BS TA 57:1974. Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm)
BS 2V 35:1966 BS 2V 35:1966. Specification for plywood for aeronautical purposes
BS 2V 37:1968 BS 2V 37:1968. Specification for Sitka spruce as finished timber
BS V 38:1967 BS V 38:1967. Specification for Sitka spruce as rough timber
BS TA 58:1974 BS TA 58:1974. Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
BS TA 59:1980 BS TA 59:1980. Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa)
BS 2W 11:1967 BS 2W 11:1967. Specification for aircraft material. Preformed corrosion-resisting steel wire rope
BS W 13:1973 BS W 13:1973. Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths)
BS 6368:1983, IEC 60701:1981 BS 6368:1983, IEC 60701:1981. Specification for axial lead cores made of magnetic oxides or iron powder
BS 6310:1982, IEC 60711:1981 BS 6310:1982, IEC 60711:1981. Specification for occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts
BS 6329:1982, IEC 60714:1981 BS 6329:1982, IEC 60714:1981. Method of expression of the properties of spectrum analyzers
BS 6397:1983, IEC 60263:1982 BS 6397:1983, IEC 60263:1982. Specification for scales and sizes for plotting frequency characteristics and polar diagrams
BS 6438-1:1984, IEC 60746-1:1982 BS 6438-1:1984, IEC 60746-1:1982. Electrochemical analyzers. Method for specifying performance common to all analyzers
BS 6438-2:1984, IEC 60746-2:1982 BS 6438-2:1984, IEC 60746-2:1982. Electrochemical analyzers. Method for specifying performance of pH value analyzers
BS 6513-1:1984 BS 6513-1:1984. Wideband cabled distribution systems. Glossary of terms
BS 6513-2:1984 BS 6513-2:1984. Wideband cabled distribution systems. Methods of measurement
BS 6513:Part 3:1984 BS 6513:Part 3:1984. Wideband cabled distribution systems. Specification for performance requirements, for downstream television and f.m. sound radio signals
BS 6513-4:1984 BS 6513-4:1984. Wideband cabled distribution systems. Specification for performance requirements, for upstream television
BS 6522:1984 BS 6522:1984. Methods for determination of percentage water saturation of insulating oil
BS 6447:1984 BS 6447:1984. Specification for absolute and gauge pressure transmitters with electrical outputs
BS 6553:1984, IEC 60787:1983 BS 6553:1984, IEC 60787:1983. Guide for selection of fuse links of high-voltage fuses for transformer circuit applications
BS 6581:1985, IEC 60694:1980 BS 6581:1985, IEC 60694:1980. Specification for common requirements for high-voltage switchgear and controlgear standards
BS 6430:1983, ISO 2955-1983 BS 6430:1983, ISO 2955-1983. Method for representing SI and other units in information processing systems with limited character sets
BS 6488:1984 BS 6488:1984. Code of practice for configuration management of computer-based systems
BS 638:Part 8:1984 BS 638:Part 8:1984. Arc welding power sources, equipment and accessories. Specification for electrode holders and hand held torches and guns for MIG, MAG and TIG welding
BS 2782-3:Method 346A:1984 BS 2782-3:Method 346A:1984. Methods of testing plastics. Mechanical properties. Determination of cohesion between layers of laminated tube
BS 5600-2.2.3:1984 BS 5600-2.2.3:1984. Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of apparent density. Oscillating funnel method
BS 6161:Part 6:1984, ISO 2931-1983 BS 6161:Part 6:1984, ISO 2931-1983. Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of admittance or impedance
BS 6161-7:1984 BS 6161-7:1984. Methods of test for anodic oxidation coatings on aluminium and its alloys. Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light
BS 6542-1:1984, ISO 7665-1983 BS 6542-1:1984, ISO 7665-1983. File structure and labelling of flexible disk cartridges for information interchange. Specification for sequential file allocation structure
PD 6498:1981 PD 6498:1981. Detail drawings for fire propagation apparatus specified in BS 476:Part 6:1981
BS 1494-1:1964 BS 1494-1:1964. Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
BS 3951:Part 1:Section 1.6:1985, ISO 6346-1984 BS 3951:Part 1:Section 1.6:1985, ISO 6346-1984. Freight containers. General. Specification for coding, identification and marking
BS 4327:Part 3:1984, ISO 476-1982 BS 4327:Part 3:1984, ISO 476-1982. Glossary of terms relating to the winding of textile yarns. Pirn winders
BS 5086-4:1985 BS 5086-4:1985. Analysis of butter. Method for determination of salt content (reference method)
BS 6331-4:1985 BS 6331-4:1985. Mounting dimensions of single rod double acting hydraulic cylinders. Specification for 63 bar series, including associated components
BS 6340-8:1985 BS 6340-8:1985. Shower units. Specification for prefabricated shower trays made from glazed ceramic
BS 9610:1982 BS 9610:1982. Specification for quartz crystal units of assessed quality: generic data and methods of test
BS 9612 N008:1977 BS 9612 N008:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N007:1977 BS 9612 N007:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9090:1977 BS 9090:1977. Variable capacitors of assessed quality: generic data and methods of test
BS 9093 N001:1977 BS 9093 N001:1977. Detail specification for variable pre-set air dielectric capacitors (type C). Vane type without locking device, not sealed. Full assessment level
BS 9150:1983 BS 9150:1983. Specification for electrical relays of assessed quality: generic data and methods of test
PD 6467:1972 PD 6467:1972. Arrangement of vibration tester
BS 1902:Part 4:Section 4.4:1984 BS 1902:Part 4:Section 4.4:1984. Methods of testing refractory materials. Properties measured under an applied stress. Determination of modulus of rupture at ambient temperature (method 1902-404)
BS 9151:1972 BS 9151:1972. Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality. Full and basic assessment levels
BS E9375:1975, CECC 50005:1975 BS E9375:1975, CECC 50005:1975. Specification. Harmonized system of quality assessment for electronic components. Blank detail specification: voltage regulator diodes and voltage reference diodes excluding precision-voltage temperature-compensated reference diodes
BS QC 300401:1984, IEC 60384-2-1:1982,QC 300401 BS QC 300401:1984, IEC 60384-2-1:1982,QC 300401. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors. Assessment level E
BS QC 301201:1984, IEC 60384-16-1:1982,QC 301201 BS QC 301201:1984, IEC 60384-16-1:1982,QC 301201. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polypropylene film dielectric d.c. capacitors. Assessment level E
BS EN 150006:1993 BS EN 150006:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Variable capacitance diode(s)
BS 6385:1983, ISO 6687-1982 BS 6385:1983, ISO 6687-1982. Method of specifying performance requirements for winches on forestry machinery
BS 6475:1984 BS 6475:1984. Specification for processor system bus interface (Eurobus A)
BS 9751:1979 BS 9751:1979. Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level
BS 9152:1978 BS 9152:1978. Rules for the preparation of detail specifications for reed relays of assessed quality
BS 9153:1982 BS 9153:1982. Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality primarily intended for telecommunication applications. Full and basic assessment levels
BS 9200:1972 BS 9200:1972. Specification for reed contact units of assessed quality: generic data and methods of test
BS 9562:1982 BS 9562:1982. Specification for microswitches (sensitive switches) of assessed quality: generic data and methods of test: general rules for the preparation of detail specifications. Basic and full assessment levels
BS 9563 N0032:1980 BS 9563 N0032:1980. Detail specification for rotary wafer switch (manual). 30 mm central hole mounting, spindle and panel sealed or non-sealed, solder terminations. Full assessment level
BS 9564:1980 BS 9564:1980. Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9566:1984 BS 9566:1984. Rules for the preparation of detail specifications for printed board programming switches
BS CECC 16100:1980 BS CECC 16100:1980. Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing relays
BS CECC 16101:1980 BS CECC 16101:1980. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing relays. Test schedule 3
BS CECC 18000:1984 BS CECC 18000:1984. Harmonized system of quality assessment for electronic components: generic specification: dry reed change-over contact units mechanically biased
BS CECC 19000:1979 BS CECC 19000:1979. Harmonized system of quality assessment for electronic components: generic specification: dry reed make contact units
BS 3620:1963 BS 3620:1963. Methods for the expression and presentation of results of coal cleaning tests
BS CECC 17001:1984 BS CECC 17001:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Mercury wetted make contact units for general application
BS 9600:1983 BS 9600:1983. Specification for piezoelectric crystal filters of assessed quality: generic data and methods of test
BS 9612 N004:1977 BS 9612 N004:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N005:1977 BS 9612 N005:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N006:1977 BS 9612 N006:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N009:1977 BS 9612 N009:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N010:1979 BS 9612 N010:1979. Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 6.0 to 25 MHz frequency range. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N016:1979 BS 9612 N016:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N017:1979 BS 9612 N017:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N018:1979 BS 9612 N018:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N019:1979 BS 9612 N019:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N020:1979 BS 9612 N020:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N021:1979 BS 9612 N021:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9617:1982 BS 9617:1982. Rules for the preparation of detail specifications for quartz crystal units of assessed quality. Full assessment level
BS 9625:1983 BS 9625:1983. Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level
BS 9925-0:1984, IEC 60723-1:1982,QC 250000:1982 BS 9925-0:1984, IEC 60723-1:1982,QC 250000:1982. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunications. Generic specification
BS 9925-01.0:1984, IEC 60723-2:1983,QC 250100:1983 BS 9925-01.0:1984, IEC 60723-2:1983,QC 250100:1983. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunications. Sectional specification: magnetic oxide cores for inductor applications
BS 9925-01.01:1984, IEC 60723-2-1:1983,QC 250101:1983 BS 9925-01.01:1984, IEC 60723-2-1:1983,QC 250101:1983. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunications. Blank detail specification: magnetic oxide cores for inductor applications. Assessment level A
BS EN 125100:1993, CECC 25100:1976 BS EN 125100:1993, CECC 25100:1976. Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for inductor applications
BS EN 125200:1993, CECC 25200:1977 BS EN 125200:1993, CECC 25200:1977. Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for linear transformers
BS CECC 25300:1981 BS CECC 25300:1981. Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for power applications
BS EN 125400:1993, CECC 25400:1982 BS EN 125400:1993, CECC 25400:1982. Harmonized system of quality assessment for electronic components: sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers
BS 9561:1979 BS 9561:1979. Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9130:1972 BS 9130:1972. Specification for potentiometers of assessed quality: generic data and methods of test
BS 9131:1973 BS 9131:1973. Rules for the preparation of detail specifications for lead-screw actuated preset potentiometers of assessed quality
BS 9131 N001 to 016:1974 BS 9131 N001 to 016:1974. Detail specification for lead-screw actuated wirewound or non-wirewound preset potentiometers. Rectangular and square forms, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel. Full assessment level
BS 9133:1973 BS 9133:1973. Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality
BS 9133 N001 to 003:1975 BS 9133 N001 to 003:1975. Detail specification for single turn low power non-wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed. Full assessment level
BS 9133 N004 to 010:1975 BS 9133 N004 to 010:1975. Detail specification for single turn low power wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed. Full assessment level
BS 9940-01.0:1983, IEC 60115-2:1982,QC 400100:1982 BS 9940-01.0:1983, IEC 60115-2:1982,QC 400100:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed low power non-wirewound resistors
BS 9940-01.01:1983, IEC 60115-2-1:1982,QC 400101:1982 BS 9940-01.01:1983, IEC 60115-2-1:1982,QC 400101:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed low power non-wirewound resistors. Assessment level E
BS QC 400200:1993, IEC 60115-4:1982,QC 400200:1982 BS QC 400200:1993, IEC 60115-4:1982,QC 400200:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed power resistors
BS QC 400201:1993, IEC 60115-4-1:1983,QC 400201 BS QC 400201:1993, IEC 60115-4-1:1983,QC 400201. Specification for harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed power resistors. Assessment level E
BS 9940-03.0:1983, IEC 60115-5:1982,QC 400300:1982 BS 9940-03.0:1983, IEC 60115-5:1982,QC 400300:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed precision resistors
BS 9940-03.01:1984, IEC 60115-5-1:1983,QC 400301 BS 9940-03.01:1984, IEC 60115-5-1:1983,QC 400301. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed precision resistors. Assessment level E
BS 9940-04.0:1984, IEC 60115-6:1983,QC 400400:1983 BS 9940-04.0:1984, IEC 60115-6:1983,QC 400400:1983. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed resistor networks with individually measurable resistors
BS 9940-04.01:1984, IEC 60115-6-1:1983,QC 400401 BS 9940-04.01:1984, IEC 60115-6-1:1983,QC 400401. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed resistor networks with individually measurable resistors all of equal value and equal dissipation. Assessment level E
BS 9940-04.02:1984, IEC 60115-6-2:1983,QC 400402 BS 9940-04.02:1984, IEC 60115-6-2:1983,QC 400402. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed resistor networks with individually measurable resistors of either different resistance values or different rated dissipations. Assessment level E
BS CECC 40000:1980 BS CECC 40000:1980. Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS CECC 40100:1981 BS CECC 40100:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed low power non-wirewound resistors
BS CECC 40101 019:1977 BS CECC 40101 019:1977. Detail specification for fixed low power non-wirewound insulated resistors. Metal oxide film, helically cut. Full assessment level
BS CECC 40102:1981 BS CECC 40102:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors. Assessment level M
BS CECC 40200:1981 BS CECC 40200:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed power resistors
BS CECC 40201:1981 BS CECC 40201:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level S
BS CECC 40202:1981 BS CECC 40202:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level M
BS CECC 40203:1981 BS CECC 40203:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level H
BS CECC 40300:1981 BS CECC 40300:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed precision resistors
BS CECC 41000:1977 BS CECC 41000:1977. Harmonized system of quality assessment for electronic components: generic specification for potentiometers
BS CECC 41100:1978 BS CECC 41100:1978. Harmonized system of quality assessment for electronic components: sectional specification: lead screw actuated and rotary preset potentiometers
BS CECC 41101:1978 BS CECC 41101:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: preset potentiometers (assessment level S)
BS CECC 41102:1978 BS CECC 41102:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: preset potentiometers (assessment level M)
BS CECC 41200:1979 BS CECC 41200:1979. Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
BS CECC 41201:1978 BS CECC 41201:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: power potentiometers (assessment level S)
BS CECC 41202:1978 BS CECC 41202:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: power potentiometers (assessment level M)
BS CECC 41300:1979 BS CECC 41300:1979. Harmonized system of quality assessment for electronic components. Sectional specification: low power single-turn rotary potentiometers
BS CECC 41301:1979 BS CECC 41301:1979. Specification for harmonized system of quality assessment for electronic components.Blank detail specification: low power single turn rotary potentiometers (assessment level S)
BS CECC 41302:1979 BS CECC 41302:1979. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low power single turn rotary potentiometers (assessment level M)
BS CECC 41400:1980 BS CECC 41400:1980. Harmonized system of quality assessment for electronic components: sectional specification: rotary precision potentiometers
BS CECC 41401:1979 BS CECC 41401:1979. Specification for harmonized system of quality assessment for electronic conponents. Blank detail specification: rotary precision potentiometers (assessment level S)
BS CECC 42000:1978 BS CECC 42000:1978. Harmonized system of quality assessment for electronic components: generic specification: varistors
BS CECC 42100:1978 BS CECC 42100:1978. Harmonized system of quality assessment for electronic components: sectional specification: low voltage varistors primarily for telephony applications
BS CECC 42101:1978 BS CECC 42101:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low voltage varistors primarily for telephony applications (assessment level P)
BS 9070:Sections 1 and 2:1969 BS 9070:Sections 1 and 2:1969. Specification for fixed capacitors of assessed quality: generic data and methods of test. Principles and mandatory procedures. General rules for drafting detail specifications
BS 9070-4:1971 BS 9070-4:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Polystyrene dielectric capacitors
BS 9070-5:1971 BS 9070-5:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Ceramic dielectric capacitors
BS 9070-6:1971 BS 9070-6:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and polypropylene dielectric capacitors for d.c. and a.c. use
BS 9070-7:1971 BS 9070-7:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Mica dielectric capacitors
BS 9070 N002:1971 BS 9070 N002:1971. Detail specification for fixed metallized mica dielectric capacitors (style C2AED). Rectangular non-metallic case, centred wires on one face. General application category
BS 9070 N003:1971 BS 9070 N003:1971. Detail specification for fixed metallized mica dielectric capacitors (style C2AEA). Rectangular non-metallic case, axial wires at both ends. General application category
BS 9073 N0034:1978 BS 9073 N0034:1978. Detail specification for fixed tantalum electrolytic capacitors. Porous anode, polar non-solid electrolyte. Tubular insulated metallic case, PTFE/elastomer seal, axial wire terminations. Full plus additional assessment level
BS 9074 N002:1974 BS 9074 N002:1974. Detail specification for fixed polystyrene foil dielectric capacitors. Tubular insulated case, axial terminations. Full asessment level
BS 9074 N007:1981 BS 9074 N007:1981. Detail specification for polystyrene film dielectric capacitors, extended foil. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level
BS 9075 N001:1981 BS 9075 N001:1981. Detail specification for fixed ceramic dielectric capacitors (type 1 and type 2). Rectangular monolithic chip. Full assessment level
BS 9075 N023:1978 BS 9075 N023:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 1B). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9075 N024:1978 BS 9075 N024:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 2C1). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9075 N025:1978 BS 9075 N025:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 2F4). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9076 N001 to 004:1974 BS 9076 N001 to 004:1974. Detail specification for fixed metallized polyethylene terephthalate (PETP) film or metallized polycarbonate film dielectric capacitors. Rectangular non-metallic case axial or radial terminations, centrally spaced. Full assessment level
BS 9100:1983 BS 9100:1983. Specification for capability approval for custom-built capacitors and capacitor modules: generic data and methods of test


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment