2009/09/07

Cheapest & Latest BSI Standard (PDF) (11)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS ISO 8188:2007 BS ISO 8188:2007. Textile machinery and accessories. Pitches of knitting machines
BS ISO 8121:2007 BS ISO 8121:2007. Textile machinery. Knitting machines. Nameplate information
ISO12480-4 : 2007 EDTN1 ISO12480-4 : 2007 EDTN1. ISO 12480-4 Cranes — Safe use —. Part 4: Jib cranes
ISO22719 : 2008 EDTN1 ISO22719 : 2008 EDTN1. ISO22719 : 2008 Water quality - Determination of total alkalinity in sea water using high precision potentiometric titration
ISO10972-4 : 2007 EDTN1 ISO10972-4 : 2007 EDTN1. ISO10972-4 : 2007 Cranes - Requirements for mechanisms. Part 4 - Jib cranes
BS EN ISO 4892-3:2006 BS EN ISO 4892-3:2006. Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps
PD ISO/TR 25599:2006 PD ISO/TR 25599:2006. Cranes. Jib cranes. International standards for design, manufacturing, use and maintenance requirements and recommendations
BS EN 2856:2006 BS EN 2856:2006. Aerospace series. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore. Classification: 1100 MPa/235°C
BS EN 3626:2006 BS EN 3626:2006. Aerospace series. Nuts, hexagon, self-locking in steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS ISO/IEC 15414:2006 BS ISO/IEC 15414:2006. Information technology. Open distributed processing. Reference model. Enterprise language
DD IEC/TS 62396-1:2006 DD IEC/TS 62396-1:2006. Process management for avionics. Atmospheric radiation effects. Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment
DD IEC/TS 60695-1-20:2008 DD IEC/TS 60695-1-20:2008. Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
BS EN 60601-1-8:2007 BS EN 60601-1-8:2007. Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
BS EN ISO 17075:2007 BS EN ISO 17075:2007. Leather. Chemical tests. Determination of chromium(VI) content
BS EN 1332-4:2007 BS EN 1332-4:2007. Identification card systems. Man-machine interface. Coding of user requirements for people with special needs
BS EN 15450:2007 BS EN 15450:2007. Heating systems in buildings. Design of heat pump heating systems
BS EN ISO 9967:2007 BS EN ISO 9967:2007. Thermoplastics pipes. Determination of creep ratio
BS ISO 18373-1:2007 BS ISO 18373-1:2007. Rigid PVC pipes. Differential scanning calorimetry (DSC) method. Measurement of the processing temperature
BS EN 573-3:2007 BS EN 573-3:2007. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
BS EN 1386:2007 BS EN 1386:2007. Aluminium and aluminium alloys. Tread plate. Specifications
BS EN 1396:2007 BS EN 1396:2007. Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications
BS EN 60068-2-6:2008 BS EN 60068-2-6:2008. Environmental testing. Tests. Test Fc. Vibration (sinusoidal)
BS ISO 17363:2007 BS ISO 17363:2007. Supply chain applications of RFID. Freight containers
BS EN 60068-2-54:2006 BS EN 60068-2-54:2006. Environmental testing. Tests. Test Ta: Solderability testing of electronic components by the wetting balance method
BS EN 61760-1:2006 BS EN 61760-1:2006. Surface mounting technology. Standard method for the specification of surface mounting components (SMDs)
08/30145057 DC 08/30145057 DC. BS ISO 8729-1. Ships and marine technology. Marine radar reflectors. Part 1. Passive type
BS EN 60684-3-246:2007 BS EN 60684-3-246:2007. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded
BS EN 13269:2006 BS EN 13269:2006. Maintenance. Guideline on preparation of maintenance contracts
BS EN ISO 7823-3:2007 BS EN ISO 7823-3:2007. Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics. Continuous cast sheets
BS EN 3727:2006 BS EN 3727:2006. Aerospace series. Bearings, airframe rolling rigid with flanged alignment housing. Technical specification
BS EN 4041:2006 BS EN 4041:2006. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads
BS EN 12710:2006 BS EN 12710:2006. Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l
06/30145152 DC 06/30145152 DC. ISO 15874-3:2003 AMD 1. Plastics piping systems for hot and cold water installations. Polypropyl ene (PP). Part 3. Fittings
BS ISO 16532-2:2007 BS ISO 16532-2:2007. Paper and board. Determination of grease resistance. Surface repellency test
BS ISO 5415:2007 BS ISO 5415:2007. Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
PD CEN/TR 15589:2007 PD CEN/TR 15589:2007. Non-destructive testing. Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC
BS EN 3660-001:2006 BS EN 3660-001:2006. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Technical specification
BS EN ISO 15015:2007 BS EN ISO 15015:2007. Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
BS EN 3660-002:2006 BS EN 3660-002:2006. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Index of product standards
BS ISO 12742:2007 BS ISO 12742:2007. Copper, lead, and zinc sulfide concentrates. Determination of transportable moisture limits. Flow-table method
BS ISO 21687:2007 BS ISO 21687:2007. Carbonaceous materials used in the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
BS ISO 24233:2008 BS ISO 24233:2008. Tools for moulding. Tool specification sheet for diecasting dies
BS ISO 20918:2007 BS ISO 20918:2007. Road vehicles. Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems. Test with roller brake tester
BS 25999-2:2007 (Paperback) BS 25999-2:2007 (Paperback). Specification for business continuity management
BS ISO 2171:2007 BS ISO 2171:2007. Cereals, pulses and by-products. Determination of ash yield by incineration
BS ISO 209:2007 BS ISO 209:2007. Aluminium and aluminium alloys. Chemical composition
BS EN ISO 8502-6:2006 BS EN ISO 8502-6:2006. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Extraction of soluble contaminants for analysis. The Bresle method
PD IEC/TR 61352:2006 PD IEC/TR 61352:2006. Mnemonics and symbols for integrated circuits
BS EN 60519-11:2007 BS EN 60519-11:2007. Safety in electroheat installations. Particular requirements for installations using the effect of electromagnetic forces on liquid metals
DD IEC/TS 60870-5-601:2006 DD IEC/TS 60870-5-601:2006. Telecontrol equipment and systems. Conformance test cases for the IEC 60870-5-101 companion standard
BS 2F 151:2007 BS 2F 151:2007. Specification for shuttleless woven cotton webbing for aerospace purposes
BS EN 50270:2006 BS EN 50270:2006. Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 62026-1:2007 BS EN 62026-1:2007. Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). General rules
BS EN 61970-404:2007 BS EN 61970-404:2007. Energy management system application program interface (EMS-API). High speed data access (HSDA)
BS EN 61970-405:2007 BS EN 61970-405:2007. Energy management system application program interface (EMS-API). Generic eventing and subscription (GES)
BS EN 61970-407:2007 BS EN 61970-407:2007. Energy management system application program interface (EMS-API). Time series data access (TSDA)
BS EN 61850-7-410:2007 BS EN 61850-7-410:2007. Communication networks and systems for power utility automation. Hydroelectric power plants. Communication for monitoring and control
DD IEC/TS 62351-3:2007 DD IEC/TS 62351-3:2007. Power systems management and associated information exchange. Data and communications security. Communication network and system security. Profiles including TCP/IP
DD IEC/TS 62351-4:2007 DD IEC/TS 62351-4:2007. Power systems management and associated information exchange. Data and communications security. Profiles including MMS
DD IEC/TS 62351-6:2007 DD IEC/TS 62351-6:2007. Power systems management and associated information exchange. Data and communication security. Security for IEC 61850 profiles
06/30145474 DC 06/30145474 DC. ISO 11876. Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic aborption spectrometric method
06/30145477 DC 06/30145477 DC. ISO 3327. Hardmetals. Determination of transverse rupture strength
BS EN 2713-005:2006 BS EN 2713-005:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (spiral) and jacketed, CO2 laser printable. Product standard
BS EN 2713-009:2006 BS EN 2713-009:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (spiral) and jacketed, YAG X3 laser printable. Product standard
PD IEC/TR 60695-8-2:2008 PD IEC/TR 60695-8-2:2008. Fire hazard testing. Heat release. Summary and relevance of test methods
BS ISO 7870-1:2007 BS ISO 7870-1:2007. Control charts. General guidelines
BS EN 50436-2:2007 BS EN 50436-2:2007. Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for general preventive use
BS EN 4531-001:2007 BS EN 4531-001:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Technical specification
BS EN 4531-002:2007 BS EN 4531-002:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Specification of performance and contact arrangements
BS EN 4531-003:2007 BS EN 4531-003:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Square flange receptacle. Product standard
BS EN 4531-004:2007 BS EN 4531-004:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Jam nut receptacle. Product standard
BS EN 4531-005:2007 BS EN 4531-005:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Plug. Product standard
BS EN 4531-101:2007 BS EN 4531-101:2007. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Optical contact for EN 4641-100 cable. 55°C to 125°C. Product standard
BS EN 2591-223:2007 BS EN 2591-223:2007. Aerospace series. Elements of electrical and optical connection. Test methods. Measurement of characteristic impedance of a coaxial connector or contact
BS EN 2591-224:2007 BS EN 2591-224:2007. Aerospace series. Elements of electrical and optical connection. Test methods. RF leakage
BS EN 2591-225:2007 BS EN 2591-225:2007. Aerospace series. Elements of electrical and optical connection. Test methods. RF high potential withstanding voltage
BS EN 2591-226:2007 BS EN 2591-226:2007. Aerospace series. Elements of electrical and optical connection. Test methods. Corona level
BS EN 14236:2007 BS EN 14236:2007. Ultrasonic domestic gas meters
BS EN 61558-2-7:2007 BS EN 61558-2-7:2007. Safety of power transformers, power supplies, reactors and similar products. Particular requirements and tests for transformers and power supplies for toys
BS EN 15459:2007 BS EN 15459:2007. Energy performance of buildings. Economic evaluation procedure for energy systems in buildings
DD CEN/TS 15084:2006 DD CEN/TS 15084:2006. Liming materials. Guide to the determination of the lime requirement
DD CEN/TS 15451:2006 DD CEN/TS 15451:2006. Fertilizers. Determination of chelating agents. Determination of iron chelated by EDDHSA by ion pair chromatography
DD CEN/TS 15452:2006 DD CEN/TS 15452:2006. Fertilizers. Determination of chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC
BS ISO 3547-5:2007 BS ISO 3547-5:2007. Plain bearings. Wrapped bushes. Checking the outside diameter
BS EN 4639-102:2007 BS EN 4639-102:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Optical contact for cable EN 4641-102. Operating temperatures between -55°C and 100°C. Product standard
BS EN 4639-101:2007 BS EN 4639-101:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Optical contact for cable EN 4641-100. Operating temperatures between -65°C and 125°C. Product standard
BS EN 4639-005:2007 BS EN 4639-005:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Removable alignment sleeve holder. Product standard
BS EN 4639-004:2007 BS EN 4639-004:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Female optical module. Product standard
BS EN 4639-003:2007 BS EN 4639-003:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Male optical module. Product standard
BS EN 4639-002:2007 BS EN 4639-002:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. List of product standards
BS EN 4639-001:2007 BS EN 4639-001:2007. Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Technical specification
BS ISO 3547-6:2007 BS ISO 3547-6:2007. Plain bearings. Wrapped bushes. Checking the inside diameter
BS ISO 3547-7:2007 BS ISO 3547-7:2007. Plain bearings. Wrapped bushes. Measurement of wall thickness of thin-walled bushes
BS ISO 12301:2007 BS ISO 12301:2007. Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
BS ISO 24537:2007 BS ISO 24537:2007. Micrographics. Dimensions for reels used for 16 mm and 35 mm microfilm
BS EN 60384-3:2006 BS EN 60384-3:2006. Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
BS ISO 9517:2007 BS ISO 9517:2007. Iron ores. Determination of water-soluble chloride content. Ion-selective electrode method
BS EN 15416-3:2007 BS EN 15416-3:2007. Adhesives for load bearing timber structures. Test methods. Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
PD IEC/TR 61734:2006 PD IEC/TR 61734:2006. Application of symbols for binary logic and analogue elements
ISO16852 : 2008 EDTN1 ISO16852 : 2008 EDTN1. ISO16852 : 2008 Flame arresters - Performance requirements, test methods and limits for use
BS EN ISO 10650-2:2007 BS EN ISO 10650-2:2007. Dentistry. Powered polymerization activators. Light-emitting diode (LED) lamps
ISO8995-3 : 2006 EDTN1 ISO8995-3 : 2006 EDTN1. ISO 8995-3 Lighting of work places -. Part 2-3: Lighting requirements for safety and security of outdoor work places
BS ISO 9683-1:2006 BS ISO 9683-1:2006. Iron ores. Determination of vanadium. BPHA spectrophotometric method
BS ISO 5418-2:2006 BS ISO 5418-2:2006. Iron ores. Determination of copper. Flame atomic absorption spectrometric method
BS EN ISO 10993-12:2007 BS EN ISO 10993-12:2007. Biological evaluation of medical devices. Sample preparation and reference materials
ISO26907 : 2007 ( HEADER) EDTN1 ISO26907 : 2007 ( HEADER) EDTN1. ISO26907 : 2007 High Rate Ultra Wideband PHY and MAC Standard
WD/ISO/IEC26925 : 2006 EDTN1 WD/ISO/IEC26925 : 2006 EDTN1. ISO/IEC26925 : 2006 Information technology. Digital storage media for information interchange. Data Interchange on 120 mm and 80 mm Optical Disk using +RW HS Format. Capacity: 4,7 and 1,46 Gbytes per Side (Recording speed 8X)
ISO/IEC26908 : 2007 EDTN1 ISO/IEC26908 : 2007 EDTN1. ISO/IEC26908 : 2007 Information technology. MAC-PHY Interface for ISO/IEC 26907
PD ISO/IEC TR 24741:2007 PD ISO/IEC TR 24741:2007. Information technology. Biometrics tutorial
BS EN 15494:2007 BS EN 15494:2007. Candles. Product safety labels
BS EN 15493:2007 BS EN 15493:2007. Candles. Specification for fire safety
08/30146006 DC 08/30146006 DC. BS ISO/IEC 29794-1. Information technology. Biometric sample quality. Part 1. Framework
BS EN 13947:2006 BS EN 13947:2006. Thermal performance of curtain walling. Calculation of thermal transmittance
BS ISO 1224-2:2007 BS ISO 1224-2:2007. Rolling bearings. Instrument precision bearings. Boundary dimensions, tolerances and characteristics of inch series bearings
BS ISO 18902:2007 BS ISO 18902:2007. Imaging materials. Processed imaging materials. Albums, framing and storage materials
BS ISO 5529:2007 BS ISO 5529:2007. Wheat. Determination of the sedimentation index. Zeleny test
BS ISO 10907-2:2007 BS ISO 10907-2:2007. Tools for moulding. Locating rings. Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
ISO7240-16 : 2007 EDTN1 ISO7240-16 : 2007 EDTN1. ISO 7240-16:2007 Fire detection and alarm systems -. Part 16: Sound system control and indicating equipment
ISO7240-19 : 2007 EDTN1 ISO7240-19 : 2007 EDTN1. ISO 7240 : 2007 Fire detection and alarm systems -. Part 19: Design, installation, commissioning and service of sound systems for emergency purposes
BS EN ISO 11052:2006 BS EN ISO 11052:2006. Durum wheat flour and semolina. Determination of yellow pigment content
ISO16893-1 : 2008 EDTN1 ISO16893-1 : 2008 EDTN1. ISO16893 : 2008 Wood-based panels - Particleboard . Part 1:Classifications
BS EN 60738-1:2006 BS EN 60738-1:2006. Thermistors. Directly heated positive temperature coefficient. Generic specification
BS ISO/IEC 15438:2006 BS ISO/IEC 15438:2006. Information technology. Automatic identification and data capture techniques. PDF417 bar code symbology specification
PAS 125:2007 PAS 125:2007. Automotive services. Vehicle body repair. Specification
WD/ISO/IEC17341 : 2006 EDTN3 WD/ISO/IEC17341 : 2006 EDTN3. ISO/IEC 17341 Information technology - Data Interchange on 120 mm and 80 mm Optical Disk using +RW Format - Capacity: 4,7 Gbytes and 1,46 Gbytes per Side (Recording speed up to 4X)
WD/ISO/IEC17344 : 2006 EDTN3 WD/ISO/IEC17344 : 2006 EDTN3. ISO/IEC 17344 Information technology - Data Interchange on 120 mm and 80 mm Optical Disk using +R Format - Capacity; 4,7 and 1,46 Gbytes per side (Recording speed up to 16X)
ISO/IEC17345 : 2006 EDTN2 ISO/IEC17345 : 2006 EDTN2. ISO/IEC17345 : 2006 Information technology - Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation
08/30146353 DC 08/30146353 DC. BS EN ISO 17078-4. Petroleum and natural gas industries. Drilling and production equipment. Part 4. Practices for side-pocket mandrels and related equipment
ISO15439-2 : 2007 EDTN1 ISO15439-2 : 2007 EDTN1. ISO15439-2 : 2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 4 bar. Polyamid (PA). Part 2. Pipes
ISO15439-3 : 2007 EDTN1 ISO15439-3 : 2007 EDTN1. ISO15439-3 : 2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 4 bar. Polyamid (PA). Part 3. Fittings
DD CLC/TS 61643-12:2006 DD CLC/TS 61643-12:2006. Low-voltage surge protective devices. Surge protective devices connected to low-voltage power systems. Selection and application principles
BS EN 957-4:2006 BS EN 957-4:2006. Stationary training equipment. Strength training benches, additional specific safety requirements and test methods
06/30146603 DC 06/30146603 DC. IEC 61935-1 ED3. Testing of balanced communication cabling in accordance with ISO/IEC 11801. Part 1. Installed cabling
PD CEN/TR 81-10:2004 PD CEN/TR 81-10:2004. Safety rules for the construction and installation of lifts. Basics. System of the EN 81 series of standards
BS ISO 12234-1:2007 BS ISO 12234-1:2007. Electronic still-picture imaging. Removable memory. Basic removable-memory model
BS EN ISO 15189:2007 BS EN ISO 15189:2007. Medical laboratories. Particular requirements for quality and competence
BS ISO 4575:2007 BS ISO 4575:2007. Plastics. Poly(vinyl chloride) pastes. Determination of apparent viscosity using the Severs rheometer
BS EN 60384-3-1:2006 BS EN 60384-3-1:2006. Fixed capacitors for use in electronic equipment. Blank detail specification. Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte. Assessment level EZ
BS EN 12967-2:2007 BS EN 12967-2:2007. Health informatics. Service architecture. Information viewpoint
PD 6689:2006 PD 6689:2006. Surface dressing. Guidance on the use of BS EN 12271
BS 4841-1:2006 BS 4841-1:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated insulation boards with auto-adhesively or separately bonded facings
BS 4841-2:2006 BS 4841-2:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards with auto-adhesively bonded facings for use as thermal insulation for internal wall linings and ceilings
BS 4841-3:2006 BS 4841-3:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes
BS 8901:2007 BS 8901:2007. Specification for a sustainable event management system with guidance for use
BS EN 60601-1-2:2007 BS EN 60601-1-2:2007. Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Electromagnetic compatibility. Requirements and tests
BS ISO 3116:2007 BS ISO 3116:2007. Magnesium and magnesium alloys. Wrought magnesium alloys
BS EN 934-1:2008 BS EN 934-1:2008. Admixtures for concrete, mortar and grout. Common requirements
BS EN ISO 14880-3:2006 BS EN ISO 14880-3:2006. Optics and photonics. Microlens arrays. Test methods for optical properties other than wavefront aberrations
BS EN 3475-603:2007 BS EN 3475-603:2007. Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to wet arc tracking
BS EN 2882:2006 BS EN 2882:2006. Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS EN 3426:2006 BS EN 3426:2006. Aerospace series. Groove dimensions for axial mounting external type retaining rings
BS EN 3425:2006 BS EN 3425:2006. Aerospace series. Groove dimensions for axial mounting internal type retaining rings
BS EN ISO 835:2007 BS EN ISO 835:2007. Laboratory glassware. Graduated pipettes
BS EN 3444:2006 BS EN 3444:2006. Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C
BS EN 15468:2007 BS EN 15468:2007. Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods
ISO10303-28 : 2007 EDTN1 ISO10303-28 : 2007 EDTN1. ISO10303 : 2007 Industrial automation systems and integration - Product data representation and exchange. Part 28:Implementation methods: XML representations of EXPRESS schemas and data, using XML schemas
BS EN ISO 9187-1:2008 BS EN ISO 9187-1:2008. Injection equipment for medical use. Ampoules for injectables
PD 6691:2007 PD 6691:2007. Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications
PD 6692:2006 PD 6692:2006. Asphalt. Guidance on the use of BS EN 12697 "Bituminous mixtures. Test methods for hot mix asphalt"
ISO15878 : 2008 EDTN1 ISO15878 : 2008 EDTN1. ISO15878 : 2008 Road construction and maintenance equipment. Asphalt pavers. Terminology and commercial specifications
BS EN 60870-5-104:2006 BS EN 60870-5-104:2006. Telecontrol equipment and systems. Transmission protocols. Network access for IEC 60870-5-101 using standard transport profiles
BS EN 13035-9:2006 BS EN 13035-9:2006. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Washing installations
KIT 189 KIT 189. BS 6465 sanitary installations kit
PD CEN/TR 15419:2006 PD CEN/TR 15419:2006. Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
PD CEN/TR 15449:2006 PD CEN/TR 15449:2006. Geographic information. Standards, specifications, technical reports and guidelines, required to implement spatial data infrastructure
BS EN 15469:2007 BS EN 15469:2007. Petroleum products. Test method for free water in liquefied petroleum gas by visual inspection
BS EN 15470:2007 BS EN 15470:2007. Liquefied petroleum gases. Determination of dissolved residues. High temperature gas chromatographic method
BS EN 15471:2007 BS EN 15471:2007. Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method
DD IEC/PAS 61300-3-43:2006 DD IEC/PAS 61300-3-43:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Mode transfer function measurement for fibre optic sources
BS 8486-1:2007 BS 8486-1:2007. Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81. Electric lifts
BS 8486-2:2007 BS 8486-2:2007. Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81. Hydraulic lifts
PD CLC/TR 50451:2007 PD CLC/TR 50451:2007. Railway applications. Systematic allocation of safety integrity requirements
PD CLC/TR 50452:2007 PD CLC/TR 50452:2007. Railway applications. Radio remote control system of traction vehicle for freight traffic in multiple traction operation
BS ISO 7267-3:2007 BS ISO 7267-3:2007. Rubber-covered rollers. Determination of apparent hardness. Pusey and Jones method
BS EN 4036:2006 BS EN 4036:2006. Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
BS 7499:2007 BS 7499:2007. Static site guarding and mobile patrol services. Code of practice
BS EN 3661-006:2006 BS EN 3661-006:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Bus bar version. Product standard
BS ISO/IEC 26702:2007 BS ISO/IEC 26702:2007. Systems engineering. Application and management of the systems engineering process
BS ISO 8820-6:2007 BS ISO 8820-6:2007. Road vehicles. Fuse-links. Single-bolt fuse-links
BS ISO 7634:2003 BS ISO 7634:2003. Road vehicles. Compressed-air braking systems. Test procedures
BS EN 15484:2007, BS 2000-552:2007 BS EN 15484:2007, BS 2000-552:2007. Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method
BS ISO 19712-3:2007 BS ISO 19712-3:2007. Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
BS EN 15486:2007, BS 2000-554:2007 BS EN 15486:2007, BS 2000-554:2007. Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method
BS EN 15487:2007, BS 2000-555:2007 BS EN 15487:2007, BS 2000-555:2007. Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method
BS EN 15488:2007, BS 2000-556:2007 BS EN 15488:2007, BS 2000-556:2007. Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method
BS EN 15489:2007, BS 2000-539:2007 BS EN 15489:2007, BS 2000-539:2007. Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method
BS EN 15490:2007, BS 2000-557:2007 BS EN 15490:2007, BS 2000-557:2007. Ethanol as a blending component for petrol. Determination of pHe
BS EN 15491:2007, BS 2000-538:2007 BS EN 15491:2007, BS 2000-538:2007. Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method
ISO/IEC23003-1 : 2007 EDTN1 ISO/IEC23003-1 : 2007 EDTN1. ISO/IEC 23003-1 Information technology - MPEG audio technologies -. Part 1: MPEG Surround
BS EN 3475-704:2007 BS EN 3475-704:2007. Aerospace series. Cables, electrical, aircraft use. Test methods. Flexibility
BS ISO 17532:2007 BS ISO 17532:2007. Stationary equipment for agriculture. Data communications network for livestock farming
BS ISO 4000-2:2007 BS ISO 4000-2:2007. Passenger car tyres and rims. Rims
BS EN 62271-209:2007 BS EN 62271-209:2007. High-voltage switchgear and controlgear. Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV. Fluid-filled and extruded insulation cables. Fluid-filled and dry-type cable-terminations
PD IEC/TR 61430:1997 PD IEC/TR 61430:1997. Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
BS EN 14730-2:2006 BS EN 14730-2:2006. Railway applications. Track. Aluminothermic welding of rails. Qualifications of aluminothermic welders, approval of contractors and acceptance of welds
BS 434-2:2006 BS 434-2:2006. Bitumen road emulsions. Code of practice for the use of cationic bitumen emulsions on roads and other paved areas
BS ISO 14531-3:2006 BS ISO 14531-3:2006. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for mechanical jointing (including PE-X/metal transitions)
BS ISO 14531-2:2004 BS ISO 14531-2:2004. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for heat-fusion jointing
BS EN 3909:2007 BS EN 3909:2007. Aerospace series. Test fluids and test methods for electric components and sub-assemblies
BS EN 2713-004:2006 BS EN 2713-004:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (braided) and jacketed, ink jet printable. Product standard
BS EN 2713-006:2006 BS EN 2713-006:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (braided) and jacketed, CO2 laser printable. Product standard
BS EN 2713-008:2006 BS EN 2713-008:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°. Screened (braided) and jacketed, UV laser printable. Product standard
BS EN 2713-010:2006 BS EN 2713-010:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (braided) and jacketed, YAG X3 laser printable. Product standard
BS EN 2714-004:2006 BS EN 2714-004:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed, ink jet printable. Product standard
BS EN 2714-006:2006 BS EN 2714-006:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed, CO2 laser printable. Product standard
BS EN 2714-008:2006 BS EN 2714-008:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed, UV laser printable. Product standard
BS EN 2714-010:2006 BS EN 2714-010:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed, YAG X3 laser Printable. Product standard
PD ISO/TR 27628:2007 PD ISO/TR 27628:2007. Workplace atmospheres. Ultrafine, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment
BS ISO 7388-1:2007 BS ISO 7388-1:2007. Tool shanks with 7/24 taper for automatic tool changers. Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
BS EN 3733-007:2007 BS EN 3733-007:2007. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous. Ferrule (optical contact) for EN 4532 (200 μm/280 μm fibre). Product standard
BS ISO 7388-2:2007 BS ISO 7388-2:2007. Tool shanks with 7/24 taper for automatic tool changers. Dimensions and designation of shanks of forms J, JD and JF
BS EN 3733-008:2006 BS EN 3733-008:2006. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous . Plug sub-assembly for cable to EN 4532 (200 μm/280 μm fibre). Product standard
BS ISO 7388-3:2007 BS ISO 7388-3:2007. Tool shanks with 7/24 taper for automatic tool changers. Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
BS EN 2349-201:2006 BS EN 2349-201:2006. Aerospace series. Requirements and test procedures for relays and contactors. Visual inspection
BS EN 2349-202:2006 BS EN 2349-202:2006. Aerospace series. Requirements and test procedures for relays and contactors. Examination of dimensions and mass
BS EN 2349-301:2006 BS EN 2349-301:2006. Aerospace series. Requirements and test procedures for relays and contactors. Pick up and drop out voltage
BS EN 2349-302:2006 BS EN 2349-302:2006. Aerospace series. Requirements and test procedures for relays and contactors. Insulation resistance
BS EN 2349-303:2006 BS EN 2349-303:2006. Aerospace series. Requirements and test procedures for relays and contactors. Dielectric strength
BS EN 2349-304:2006 BS EN 2349-304:2006. Aerospace series. Requirements and test procedures for relays and contactors. Operate and release time
BS EN 2349-305:2006 BS EN 2349-305:2006. Aerospace series. Requirements and test procedures for relays and contactors. Bounce time
BS EN 2349-306:2006 BS EN 2349-306:2006. Aerospace series. Requirements and test procedures for relays and contactors. Overload d.c and a.c.
BS EN 2349-307:2006 BS EN 2349-307:2006. Aerospace series. Requirements and test procedures for relays and contactors. Contact voltage drop
BS EN 2349-308:2006 BS EN 2349-308:2006. Aerospace series. Requirements and test procedures for relays and contactors. Coil current
BS EN 2349-310:2006 BS EN 2349-310:2006. Aerospace series. Requirements and test procedures for relays and contactors. Rupture
BS EN 2349-312:2006 BS EN 2349-312:2006. Aerospace series. Requirements and test procedures for relays and contactors. Electrical service life. Mixed load
BS EN 2349-316:2006 BS EN 2349-316:2006. Aerospace series. Requirements and test procedures for relays and contactors. Mechanical life (endurance at reduced load)
BS EN 2349-317:2006 BS EN 2349-317:2006. Aerospace series. Requirements and test procedures for relays and contactors. Service life of coil switching device
BS EN 2349-318:2006 BS EN 2349-318:2006. Aerospace series. Requirements and test procedures for relays and contactors. Pick-up voltage at high temperature and drop-out voltage at low temperature
BS EN 2349-319:2006 BS EN 2349-319:2006. Aerospace series. Requirements and test procedures for relays and contactors. Miss test
DD CEN/TS 15480-1:2007 DD CEN/TS 15480-1:2007. Identification card systems. European Citizen Card. Physical, electrical and transport protocol characteristics
DD CEN/TS 15480-2:2007 DD CEN/TS 15480-2:2007. Identification card systems. European Citizen Card. Logical data structures and card services
BS EN 15505:2008 BS EN 15505:2008. Foodstuffs. Determination of trace elements. Determination of sodium and magnesium by flame atomic absorption spectrometry (AAS) after microwave digestion
DD IEC/PAS 62396-2:2007 DD IEC/PAS 62396-2:2007. Process management for avionics. Atmospheric radiation effects. Guidelines for single event effects testing for avionics systems
DD IEC/PAS 62396-4:2007 DD IEC/PAS 62396-4:2007. Process management for avionics. Atmospheric radiation effects. Guidelines for designing with high voltage aircraft electronics and potential single event effects
DD IEC/PAS 62396-5:2007 DD IEC/PAS 62396-5:2007. Process management for avionics. Atmospheric radiation effects. Guidelines for assessing thermal neutron fluxes and effects in avionics systems
BS 8487:2007 BS 8487:2007. The design and construction of gas boosters used in association with combustion equipment. Specification
BS OHSAS 18001:2007 BS OHSAS 18001:2007. Occupational health and safety management systems. Requirements
BS ISO 363-1:2006 BS ISO 363-1:2006. Textile machinery and accessories. Flat steel healds with closed end loops. Dimensions of healds manufactured of rolled steel wire
BS EN 2349-402:2006 BS EN 2349-402:2006. Aerospace series. Requirements and test procedures for relays and contactors. Corrosion, salt spray
BS EN 2349-405:2006 BS EN 2349-405:2006. Aerospace series. Requirements and test procedures for relays and contactors. Fluid resistance
BS EN 2349-407:2006 BS EN 2349-407:2006. Aerospace Series. Requirements and test procedures for relays and contactors. Cold/low pressure and moist heat
PD CLC/TR 50489:2006 PD CLC/TR 50489:2006. Smart tracker chips. Feasibility study on the inclusion of RFID in electrical and electronic equipment for WEEE management
06/30148173 DC 06/30148173 DC. ISO 9809-1. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 1. Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
06/30148176 DC 06/30148176 DC. ISO 9809-2. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 2. Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
06/30148179 DC 06/30148179 DC. ISO 9809-3. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 3. Normalized steel cylinders
BS EN ISO 1167-3:2007 BS EN ISO 1167-3:2007. Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of components
08/30148224 DC 08/30148224 DC. BS ISO 26444. Gas cylinders. Refillable welded aluminium alloy gas cylinders for greater than 60 bar test pressure. Design, construction and testing
DD CEN/TS 15234:2006 DD CEN/TS 15234:2006. Solid biofuels. Fuel quality assurance
BS EN 4416:2006 BS EN 4416:2006. Aerospace series. Non-metallic materials. Textiles. Wide woven fabrics. Technical specification
BS EN 4415:2006 BS EN 4415:2006. Aerospace series. Non-metallic materials. Textiles. Narrow woven fabrics. Technical specification
BS EN ISO 105-X18:2007 BS EN ISO 105-X18:2007. Textiles. Tests for colour fastness. Assessment of the potential to phenolic yellowing of materials
BS EN 60423:2007 BS EN 60423:2007. Conduit systems for cable management. Outside diameters of conduits for electrical installations and threads for conduits and fittings
BS 5357:2007 BS 5357:2007. Code of practice for installation and application of security glazing
BS 4978:2007 BS 4978:2007. Visual strength grading of softwood. Specification
BS 5756:2007 BS 5756:2007. Visual grading of hardwood. Specification
BS EN 4424:2006 BS EN 4424:2006. Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads
BS 9222:2007 BS 9222:2007. Personal financial planning. Guidance on the application of BS ISO 22222 and assessment of compliance
BS EN 4198:2006 BS EN 4198:2006. Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads
BIP 3024:2006 BIP 3024:2006. The UK Guide to standardization for overhead electrical lines CD-ROM
BS EN 3372-001:2007 BS EN 3372-001:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Technical specification
BS EN 3372-002:2007 BS EN 3372-002:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Specification of performance and contact arrangement
BS EN 3372-003:2007 BS EN 3372-003:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Square flange receptacle. Product standard
BS EN 3372-005:2007 BS EN 3372-005:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Receptacle, hermetic, round flange, solder mounting. Product standard
BS EN 3372-006:2007 BS EN 3372-006:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Protective cover for receptacle. Product standard
BS EN 3372-007:2007 BS EN 3372-007:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Protective cover for plug. Product standard
BS EN 3372-008:2007 BS EN 3372-008:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Free plug with grounding spring. Product standard
BS EN 3372-009:2007 BS EN 3372-009:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Receptacle, jam nut mounting. Product standard
BS EN 3372-011:2007 BS EN 3372-011:2007. Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous. Dummy receptacle. Product standard
BS EN 3155-016:2006 BS EN 3155-016:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3545-008:2006 BS EN 3545-008:2006. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C. Tools for assembly/removal of coding and attachment systems. Product standard
BS EN 2997-001:2006 BS EN 2997-001:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Technical specification
BS EN 2997-002:2006 BS EN 2997-002:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Specification of performance and contact arrangements
BS EN 2997-003:2006 BS EN 2997-003:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Square flange receptacle. Product standard
BS EN 2997-004:2006 BS EN 2997-004:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Jam-nut mounted receptacle. Product standard
BS EN 2997-005:2006 BS EN 2997-005:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Hermetic square flange receptacle. Product standard
BS EN 2997-006:2006 BS EN 2997-006:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Hermetic jam-nut mounted receptacle. Product standard
BS EN 2997-007:2006 BS EN 2997-007:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Hermetic receptacle with round flange attached by welding or brazing. Product standard
BS EN 2997-008:2006 BS EN 2997-008:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Plug. Product standard
BS EN 2997-009:2006 BS EN 2997-009:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Protective cover for receptacle. Product standard
BS EN 2997-010:2006 BS EN 2997-010:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Protective cover for plug. Product standard
BS EN 2997-011:2006 BS EN 2997-011:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Dummy receptacle. Product standard
BS ISO 22716:2007 BS ISO 22716:2007. Cosmetics. Good manufacturing practices (GMP). Guidelines on good manufacturing practices
ISO/IEC9594-1 : 2006 EDTN 5 ISO/IEC9594-1 : 2006 EDTN 5. Information technology. Open Systems Interconnection. The Directory -. Part 1: Overview of concepts, models and services
ISO/IEC9594-7 : 2006 EDTN 5 ISO/IEC9594-7 : 2006 EDTN 5. Information technology. Open Systems Interconnection The Directory. Part 7: Selected object classes
ISO/IEC9594-9 : 2006 EDTN 4 ISO/IEC9594-9 : 2006 EDTN 4. Information technology. Open Systems Interconnection. The Directory. Part 9: Replication
DD CEN/TS 15504:2007 DD CEN/TS 15504:2007. Public transport. Road vehicles. Visible variable passenger information devices inside the vehicle
BS EN 15485:2007, BS 2000-553:2007 BS EN 15485:2007, BS 2000-553:2007. Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
BS EN 12229:2007 BS EN 12229:2007. Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces
PD CLC/TR 50459-7:2007 PD CLC/TR 50459-7:2007. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Specific transmission modules
BS EN IS0 22825:2006 BS EN IS0 22825:2006. Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
BIP 2105:2006 BIP 2105:2006. Environmental Management Report : Focus on climate change
BS EN 60512-1-100:2006 BS EN 60512-1-100:2006. Connectors for electronic equipment. Test and measurements. General. Applicable publications
BS EN 50152-2:2007 BS EN 50152-2:2007. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase disconnectors, earthing switches and switches with Un above 1 kV
BS ISO 22096:2007 BS ISO 22096:2007. Condition monitoring and diagnostics of machines. Acoustic emission
BS EN 50152-1:2007 BS EN 50152-1:2007. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase circuit-breakers with Un above 1 kV
BS EN 13138-2:2007 BS EN 13138-2:2007. Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be held
BS EN 13138-3:2007 BS EN 13138-3:2007. Buoyant aids for swimming instruction. Safety requirements and test methods for swim seats to be worn
BIP 2107:2006 BIP 2107:2006. Auditing for the 21st century
BS ISO/IEC 27006:2007 BS ISO/IEC 27006:2007. Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
BS EN ISO 17070:2006 BS EN ISO 17070:2006. Leather. Chemical tests. Determination of pentachlorophenol content
BS ISO 9852:2007 BS ISO 9852:2007. Unplasticized poly(vinyl chloride) (PVC-U) pipes. Dichloromethane resistance at specified temperature (DCMT). Test method
ISO/IEC14496-16 : 2006 EDTN2 ISO/IEC14496-16 : 2006 EDTN2. ISO/IEC14496-16 : 2006 Information technology - Coding of audio-visual objects. Part 16 : Animation Framework eXtension (AFX)
BS EN ISO 5943:2006 BS EN ISO 5943:2006. Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS EN ISO 10426-1:2006 BS EN ISO 10426-1:2006. Petroleum and natural gas industries. Cements and materials for well cementing. Specification
BS EN ISO 8502-11:2006, BS 7079-B11:2006 BS EN ISO 8502-11:2006, BS 7079-B11:2006. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the turbidimetric determination of water-soluble sulfate
PD CEN/TR 15508:2006 PD CEN/TR 15508:2006. Key properties on solid recovered fuels to be used for establishing a classification system
BS EN 13412:2006 BS EN 13412:2006. Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
BS ISO 17268:2006 BS ISO 17268:2006. Compressed hydrogen surface vehicle refuelling connection devices
BS ISO 1230:2007 BS ISO 1230:2007. Photography. Determination of flash guide numbers for electronic flash equipment
06/30149088 DC 06/30149088 DC. ISO 5630-6. Paper and board. Accelerated ageing. Part 6. Exposure to atmospheric pollution
BS EN 4425:2006 BS EN 4425:2006. Aerospace series. Washers, tab in corrosion resisting steel for flight control rods. Dimensions
BS ISO 23611-4:2007 BS ISO 23611-4:2007. Soil quality. Sampling of soil invertebrates. Sampling, extraction and identification of soil-inhabiting nematodes
PD CEN/TR 15640:2007 PD CEN/TR 15640:2007. Health informatics. Measures for ensuring the patient safety of health software
BS EN 1926:2006 BS EN 1926:2006. Natural stone test methods. Determination of uniaxial compressive strength
BS ISO 4000-1:2007 BS ISO 4000-1:2007. Passenger car tyres and rims. Tyres (metric series)
BS EN 12372:2006 BS EN 12372:2006. Natural stone test methods. Determination of flexural strength under concentrated load
BS EN 1936:2006 BS EN 1936:2006. Natural stone test methods. Determination of real density and apparent density, and of total and open porosity
ISO/IEC23001-2 : 2008 EDTN1 ISO/IEC23001-2 : 2008 EDTN1. ISO/IEC23001-2 : 2008 Information technology - MPEG systems technologies. Part 2: Fragment request units
ISO/IEC14496-4 AMD15 (08/07) ISO/IEC14496-4 AMD15 (08/07) . ISO/IEC14496-4 : 2004 Information technology. Coding of audio visual objects . Part 4. Conformance testing
ISO/IEC23004-2 : 2007 EDTN1 ISO/IEC23004-2 : 2007 EDTN1. ISO/IEC23004-2 : 2007 Information technology. MPEG Multimedia Middleware . Part 2. Multimedia API
ISO/IEC23002-3 : 2007EDTN1cdrom ISO/IEC23002-3 : 2007EDTN1cdrom. ISO/IEC23002-3 : 2007 Information technology. MPEG video technologies . Part 3. Auxilliary video data
BS EN 15510:2007 BS EN 15510:2007. Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES
BS ISO 15003:2006 BS ISO 15003:2006. Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
BS EN 14810:2006 BS EN 14810:2006. Surfaces for sports areas. Determination of spike resistance
BS EN 14904:2006 BS EN 14904:2006. Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
BS EN 60904-2:2007 BS EN 60904-2:2007. Photovoltaic devices. Requirements for reference solar devices
BS EN ISO 1798:2008 BS EN ISO 1798:2008. Flexible cellular polymeric materials. Determination of tensile strength and elongation at break
BS EN ISO 13704:2007 BS EN ISO 13704:2007. Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
BS ISO 19499:2007 BS ISO 19499:2007. Mechanical vibration. Balancing. Guidance on the use and application of balancing standards
BS ISO 22514-3:2008 BS ISO 22514-3:2008. Statistical methods in process management. Capability and performance. Machine performance studies for measured data on discrete parts
BS EN 15509:2007 BS EN 15509:2007. Road transport and traffic telematics. Electronic fee collection. Interoperability application profile for DSRC
BS ISO 22241-3:2008 BS ISO 22241-3:2008. Diesel engines. NOx reduction agent AUS 32. Handling, transportation and storage
BIP 0015:2006 BIP 0015:2006. IT service management. Self assessment workbook. 2nd edition
06/30149441 DC 06/30149441 DC. ISO 8362-5. Injection containers and accessories. Part 5. Freeze drying closures for injection vials
DD ISO/TS 25238:2007 DD ISO/TS 25238:2007. Health informatics. Classification of safety risks from health software
BS EN 1866-1:2007 BS EN 1866-1:2007. Mobile fire extinguishers. Characteristics, performance and test methods
BS EN 62132-4:2006 BS EN 62132-4:2006. Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHz. Direct RF power injection method
BS IEC 60880:2006 BS IEC 60880:2006. Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions
08/30149503 DC 08/30149503 DC. BS EN ISO 14161. Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
BS EN ISO 14596:2007, BS 2000-447:2007 BS EN ISO 14596:2007, BS 2000-447:2007. Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN 14358:2006 BS EN 14358:2006. Timber structures. Calculation of characteristic 5-percentile values and acceptance criteria for a sample
BS EN 383:2007 BS EN 383:2007. Timber structures. Test methods. Determination of embedment strength and foundation values for dowel type fasteners
BS EN 3155-030:2006 BS EN 3155-030:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R. Product standard
BS EN 3155-031:2006 BS EN 3155-031:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R. Product standard
BS ISO 6460-1:2007 BS ISO 6460-1:2007. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements
BS ISO 6460-2:2007 BS ISO 6460-2:2007. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Test cycles and specific test conditions
BS ISO 6460-3:2007 BS ISO 6460-3:2007. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Fuel consumption measurement at a constant speed
BS 7907:2007 BS 7907:2007. Code of practice for the design and manufacture of children's clothing to promote mechanical safety
BS EN 12094-8:2006 BS EN 12094-8:2006. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for connectors
BS EN 12094-6:2006 BS EN 12094-6:2006. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical disable devices
BS EN 2349-309:2006 BS EN 2349-309:2006. Aerospace series. Requirements and test procedures for relays and contactors. Exported spikes
DD IEC/TS 62257-8-1:2007 DD IEC/TS 62257-8-1:2007. Recommendations for small renewable energy and hybrid systems for rural electrification. Selection of batteries and battery management systems for stand-alone electrification systems. Specific case of automotive flooded lead-acid batteries available in developing countries
BS EN ISO 9969:2007 BS EN ISO 9969:2007. Thermoplastics pipes. Determination of ring stiffness
BS ISO 8070:2007 BS ISO 8070:2007. Milk and milk products. Determination of calcium, sodium, potassium and magnesium contents. Atomic absorption spectrometric method
BS 8485:2007 BS 8485:2007. Code of practice for the characterization and remediation from ground gas in affected developments
BS ISO 11451-4:2006 BS ISO 11451-4:2006. Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
BS ISO 17355:2007 BS ISO 17355:2007. Space data and information transfer systems. CCSDS file delivery protocol
BS ISO 15396:2007 BS ISO 15396:2007. Space data and information transfer systems. Cross support reference model. Space link extension services
BIP 2112:2006 BIP 2112:2006. The audit of active fire safety systems. Practitioner's assessment and approval procedures manual
BS ISO 11075:2007 BS ISO 11075:2007. Aircraft. De-icing/anti-icing fluids. ISO type I
BS EN 62264-3:2007 BS EN 62264-3:2007. Enterprise-control system integration. Activity models of manufacturing operations management
BIP 3071:2006 BIP 3071:2006. Emergency lighting CD-ROM
BS EN 14463:2007 BS EN 14463:2007. Health informatics. A syntax to represent the content of medical classification systems. ClaML
BS EN 15517:2008 BS EN 15517:2008. Foodstuffs. Determination of trace elements. Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
BS EN 1870-14:2007 BS EN 1870-14:2007. Safety of woodworking machines. Circular sawing machines. Vertical panel sawing machines
BS ISO 8936:2007 BS ISO 8936:2007. Awnings for leisure accommodation vehicles. Requirements and test methods
DD ISO/TS 2963:2006 DD ISO/TS 2963:2006. Cheese and processed cheese products. Determination of citric acid content. Enzymatic method
PD CEN/TR 15472:2006 PD CEN/TR 15472:2006. Postal services. Measurement of transit times for parcels by the use of a track and trace system
BS ISO 10842:2006 BS ISO 10842:2006. Aircraft. Ground service connections. Locations and types
BS EN 50342-1:2006 BS EN 50342-1:2006. Lead-acid starter batteries. General requirements and methods of test
BS ISO 4306-5:2005 BS ISO 4306-5:2005. Cranes. Vocabulary. Bridge and gantry cranes
DD IEC/TS 62257-9-5:2007 DD IEC/TS 62257-9-5:2007. Recommendations for small renewable energy and hybrid systems for rural electrification. Integrated system. Selection of portable PV lanterns for rural electrification projects
BS EN 45020:2007 BS EN 45020:2007. Standardization and related activities. General vocabulary
BS ISO 6883:2007 BS ISO 6883:2007. Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air)
DD CEN/TS 15213-3:2006 DD CEN/TS 15213-3:2006. Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for short range communication
DD CEN/TS 15213-4:2006 DD CEN/TS 15213-4:2006. Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for long range communication
DD CEN/TS 15213-5:2006 DD CEN/TS 15213-5:2006. Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Messaging interface
PD IEC/TR 61282-3:2006 PD IEC/TR 61282-3:2006. Fibre optic communication system design guides. Calculation of link polarization mode dispersion
BS ISO 1977:2006 BS ISO 1977:2006. Conveyor chains, attachments and sprockets
PD CEN/TR 15463:2007 PD CEN/TR 15463:2007. Characterization of sludges. Physical consistency. Thixotropic behaviour and piling behaviour
BS EN 3745-303:2007 BS EN 3745-303:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Bandwidth
BS EN 3745-505:2007 BS EN 3745-505:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable tension strength
DD IEC/PAS 62396-3:2007 DD IEC/PAS 62396-3:2007. Process management for avionics. Atmospheric radiation effects. Optimising system design to accommodate the single event effects (SEE) of atmospheric radiation
BIP 2102:2006 BIP 2102:2006. Environment management report. Focus on Waste Management
BS EN 61033:2006 BS EN 61033:2006. Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
PD CEN/TR 15351:2006 PD CEN/TR 15351:2006. Plastics. Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
PD IEC/TR 61000-3-7:2008 PD IEC/TR 61000-3-7:2008. Electromagnetic compatability (EMC). Limits. Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
PD CLC/TR 50473:2007 PD CLC/TR 50473:2007. Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations
BS EN 13948:2007 BS EN 13948:2007. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to root penetration
BS 1123:2006 BS 1123:2006. Fusible plugs for steam boilers and compressed air applications. Specification
DD ISO/TS 21108:2005 DD ISO/TS 21108:2005. Hand-held power tools. Impulse wrenches. Dimensions and tolerances of interface to power socket
DD CEN/TS 14014:2006 DD CEN/TS 14014:2006. Postal services. Hybrid mail. XML definition of encapsulation of letters for automated postal handling
BS EN 50155:2007 BS EN 50155:2007. Railway applications. Electronic equipment used on rolling stock
BS EN 14681:2006 BS EN 14681:2006. Safety of machinery. Safety requirements for machinery and equipment for production of steel by electric arc furnaces
BS EN ISO 5674:2006 BS EN ISO 5674:2006. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
BS EN ISO 22868:2006 BS EN ISO 22868:2006. Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (grade 2 accuracy)
BS 5000-3:2006 BS 5000-3:2006. Rotating electrical machines of particular types or for particular applications. Generators to be driven by reciprocating internal combustion engines. Requirements for resistance to vibration
DD IEC/PAS 61169-4:2006 DD IEC/PAS 61169-4:2006. Radio-frequency connectors . Sectional specification. Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock. Characteristic impedance 50 Ω (type 7-16)
BS 6F 49:2007 BS 6F 49:2007. Specification for shuttle woven cotton webbing for aerospace purposes
BS ISO 4097:2007 BS ISO 4097:2007. Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
BS EN 14411:2006 BS EN 14411:2006. Ceramic tiles. Definitions, classification, characteristics and marking
DD IEC/TS 62454:2007 DD IEC/TS 62454:2007. Mechanical structures for electronic equipment. Design guide. Interface dimensions and provisions for water cooling of electronic equipment within cabinets of the IEC 60297 and IEC 60917 series
BS EN ISO 13857:2008 BS EN ISO 13857:2008. Safety of machinery. Safety distances to prevent hazard zones being reached by upper and lower limbs
06/30150517 DC 06/30150517 DC. IEC 62153-4-9. Metallic communication cable test methods. Part 4-9. Electromagnetic compatibility (EMC). Coupling attenuation of screened balanced cables, triaxial method
BS EN 61023:2007 BS EN 61023:2007. Maritime navigation and radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance requirements, methods of testing and required test results
BS EN 61097-1:2007 BS EN 61097-1:2007. Global maritime distress and safety system (GMDSS). Radar transponder. Marine search and rescue (SART). Operational and performance requirements, methods of testing and required test results
BS EN 15521:2007 BS EN 15521:2007. Health informatics. Categorial structure for terminologies of human anatomy
BS EN 4406:2006 BS EN 4406:2006. Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant
BS EN 4592:2006 BS EN 4592:2006. Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance
BS EN 12588:2006 BS EN 12588:2006. Lead and lead alloys. Rolled lead sheet for building purposes
BS EN 15520:2007 BS EN 15520:2007. Thermal spraying. Recommendations for constructional design of components with thermally sprayed coatings
BS ISO 6452:2007 BS ISO 6452:2007. Rubber- or plastics-coated fabrics. Determination of fogging characteristics of trim materials in the interior of automobiles
BS EN ISO 5981:2007 BS EN ISO 5981:2007. Rubber or plastics-coated fabrics. Determination of resistance to combined shear flexing and rubbing
BS ISO 1728:2006 BS ISO 1728:2006. Road vehicles. Pneumatic braking connections between motor vehicles and towed vehicles. Interchangeability
ISO11674 : 2006 EDTN2 ISO11674 : 2006 EDTN2. ISO 11674 Ships and marine technology - Heading control systems
DD ISO/PAS 20282-3:2007 DD ISO/PAS 20282-3:2007. Ease of operation of everyday products. Test method for consumer products
DD ISO/PAS 20282-4:2007 DD ISO/PAS 20282-4:2007. Ease of operation of everyday products. Test method for the installation of consumer products
BS ISO 14469-3:2006 BS ISO 14469-3:2006. Road vehicles. Compressed natural gas (CNG) refuelling connector. 25 MPa (250 bar) connector
BS EN 3155-045:2006 BS EN 3155-045:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, double crimping, class T. Product standard
BS ISO 16107:2007 BS ISO 16107:2007. Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
BS EN 50494:2007 BS EN 50494:2007. Satellite signal distribution over a single coaxial cable in single dwelling installations
PD IEC/TR 62350:2006 PD IEC/TR 62350:2006. Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use
BS EN 61482-1-2:2007 BS EN 61482-1-2:2007. Live working. Protective clothing against the thermal hazards of an electric arc. Test methods. Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)
BS ISO 4928:2006 BS ISO 4928:2006. Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120°C max.)
08/30150768 DC 08/30150768 DC. BS ISO 4254-11. Agricultural machinery. Safety. Part 11. Pick-up balers
BS EN 3646-011:2006 BS EN 3646-011:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Dummy receptacle. Product standard
08/30150772 DC 08/30150772 DC. BS ISO 4254-12. Agricultural machinery. Safety. Part 12. Rotary mowers a nd flail-mowers
BS ISO 6118:2006 BS ISO 6118:2006. Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70°C max.)
BS 5440-1:2008 BS 5440-1:2008. Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases). Specification for installation of gas appliances to chimneys and for maintenance of chimneys
BS EN 3716-005:2006 BS EN 3716-005:2006. Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data. Crimp receptacle. Product standard
BS EN 3716-006:2006 BS EN 3716-006:2006. Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data. Crimp plug. Product standard
BS EN 3299:2007 BS EN 3299:2007. Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification
BS ISO 20653:2006 BS ISO 20653:2006. Road vehicles. Degrees of protection (IP-Code). Protection of electrical equipment against foreign objects, water and access
BS EN 4359:2006 BS EN 4359:2006. Aerospace series. Six lobe recess. Drivers. Technical Specification
BS EN 4396:2008 BS EN 4396:2008. Aerospace series. Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
BS EN 4358:2006 BS EN 4358:2006. Aerospace series. Six lobe recess. Drivers, double ended, 90
BS EN 4357:2006 BS EN 4357:2006. Aerospace series. Six lobe recess. Drivers, handle
BS EN 4356:2006 BS EN 4356:2006. Aerospace series. Six lobe recess. Drivers, short
BS EN 4354:2006 BS EN 4354:2006. Aerospace series. Six lobe recess. Drivers, relieved
BS EN 4110:2006 BS EN 4110:2006. Aerospace series. Wrenches, open end, box
BS EN 4302:2008 BS EN 4302:2008. Aerospace series. Open ring insert tool, square drive
BS EN 4109:2006 BS EN 4109:2006. Aerospace series. Wrenches, face spanner
BS EN 4108:2006 BS EN 4108:2006. Aerospace series. Wrenches, crow foot, attachment socket, socket drive
BS EN 4399:2008 BS EN 4399:2008. Aerospace series. Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
BS EN 3913:2007 BS EN 3913:2007. Aerospace series. Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
BS EN 3912:2007 BS EN 3912:2007. Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated. Classification: 1100 MPa (at ambient temperature) / 650°C
BS EN 4158:2006 BS EN 4158:2006. Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers
BS ISO 19706:2007 BS ISO 19706:2007. Guidelines for assessing the fire threat to people
BS 8490:2007 BS 8490:2007. Guide to siphonic roof drainage systems
BIP 2103:2006 BIP 2103:2006. Environmental Management Report. Focus on Environment & Corporate Responsibility Communications
ISO/IEC9995-1 : 2006 EDTN2 ISO/IEC9995-1 : 2006 EDTN2. ISO/IEC 9995-1 Information technology - Keyboard layouts for text and office systems. Part 1: General principles governing keyboard layouts
ISO/IEC9995-5 : 2006 EDTN2 ISO/IEC9995-5 : 2006 EDTN2. ISO/IEC 9995-5 Information technology - Keyboard layouts for text and office systems. Part 5: Editing section
ISO/IEC9995-6 : 2006 EDTN2 ISO/IEC9995-6 : 2006 EDTN2. ISO/IEC 9995-6 Information technology - Keyboard layouts for text and office systems. Part 6: Function section
ISO/IEC9995-8 : 2006 EDTN2 ISO/IEC9995-8 : 2006 EDTN2. ISO/IEC 9995-8 Information technology - Keyboard layouts for text and office systems. Part 8: Allocation of letters to the keys of a numeric keypad
DD CEN/TS 14175-5:2006 DD CEN/TS 14175-5:2006. Fume cupboards. Recommendations for installation and maintenance
BS ISO 8454:2007 BS ISO 8454:2007. Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke. NDIR method
08/30151040 DC 08/30151040 DC. BS ISO 27306. Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS EN 61076-7-100:2006 BS EN 61076-7-100:2006. Connectors for electronic equipment. Product requirements. Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
ISO10245-3 : 2008 EDTN2 ISO10245-3 : 2008 EDTN2. ISO10245 : 2008 Cranes - Limiting and indicating devices. Part 3:Tower cranes
BS EN 50497:2007 BS EN 50497:2007. Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables
BS ISO 16750-1:2006 BS ISO 16750-1:2006. Road vehicles. Environmental conditions and testing for electrical and electronic equipment. General
BS ISO 16750-2:2006 BS ISO 16750-2:2006. Road vehicles. Environmental conditions and testing for electrical & electronic equipment. Electrical loads
BS ISO 16750-4:2006 BS ISO 16750-4:2006. Road vehicles. Environmental conditions and testing for electrical & electronic equipment. Climatic loads
BS ISO 16750-3:2007 BS ISO 16750-3:2007. Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Mechanical loads
BS ISO 19703:2005 BS ISO 19703:2005. Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
BS EN ISO 13366-1:2008 BS EN ISO 13366-1:2008. Milk. Enumeration of somatic cells. Microscopic method (Reference method)
BS ISO 9043:2008 BS ISO 9043:2008. Mopeds. Measurement method for moments of inertia
BS ISO 22673:2008 BS ISO 22673:2008. Ships and marine technology. Launching appliances for free-fall lifeboats
BS EN 1124-2:2007 BS EN 1124-2:2007. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System S; dimensions
BS ISO/IEC 7812-2:2007 BS ISO/IEC 7812-2:2007. Identification cards. Identification of issuers. Application and registration procedures
BS ISO/IEC 7811-8:2008 BS ISO/IEC 7811-8:2008. Identification cards. Recording technique. Magnetic stripe. Coercivity of 51,7 kA/m (650 Oe)
BS EN 55015:2006+A2:2009 BS EN 55015:2006+A2:2009. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS ISO 1409:2006 BS ISO 1409:2006. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method
ISO/IEC24738 : 2006 EDTN1 ISO/IEC24738 : 2006 EDTN1. ISO/IEC24738 : 2006 Information technology - Icon symbols and functions for multimedia link attributes
BS EN ISO 22088-4:2006 BS EN ISO 22088-4:2006. Plastics. Determination of resistance to environmental stress cracking (ESC). Ball or pin impression method
ISO/IEC24702 : 2006 EDTN1 ISO/IEC24702 : 2006 EDTN1. ISO/IEC24702 : 2006 Information technology. Generic cabling. Industrial premises
BS EN 60601-2-13:2006 BS EN 60601-2-13:2006. Medical electrical equipment. Particular requirements for the safety and essential performance of anaesthetic systems
BS EN 14673:2006 BS EN 14673:2006. Safety of machinery. Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
BS EN ISO 22088-1:2006 BS EN ISO 22088-1:2006. Plastics. Determination of resistance to environmental stress cracking (ESC). General guidance
BS EN ISO 22088-2:2006 BS EN ISO 22088-2:2006. Plastics. Determination of resistance to environmental stress cracking (ESC). Constant tensile load method
BS EN ISO 22088-3:2006 BS EN ISO 22088-3:2006. Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method
08/30151428 DC 08/30151428 DC. BS ISO 26802. Nuclear facilities. Criteria for the design and the operat ion of containment and ventilation systems for nuclear reactors
BS EN 14877:2006 BS EN 14877:2006. Synthetic surfaces for outdoor sports areas. Specification
BS EN 14808:2005 BS EN 14808:2005. Surfaces for sports areas. Determination of shock absorption
BS EN 14837:2006 BS EN 14837:2006. Surfaces for sports areas. Determination of slip resistance
BS ISO 247:2006 BS ISO 247:2006. Rubber. Determination of ash
BS ISO 9028:2006 BS ISO 9028:2006. Rubber. Dissolution by acid digestion
BS EN 14656:2006 BS EN 14656:2006. Safety of machinery. Safety requirements for extrusion presses for steel and non-ferrous metals
PAS 121:2007 PAS 121:2007. Specification for active fire curtain barrier assemblies and active fire barrier assemblies with smoke rating
PD CLC/TR 61800-6:2007 PD CLC/TR 61800-6:2007. Adjustable speed electrical power drive systems. Guide for determination of types of load duty and corresponding current ratings
BS EN ISO 8988:2006 BS EN ISO 8988:2006. Plastics. Phenolic resins. Determination of hexamethylene-tetramine content. Kjeldahl method, perchloric acid method and hydrochloric acid method
DD CEN/TS 15475:2006 DD CEN/TS 15475:2006. Fertilizers. Determination of ammoniacal nitrogen
DD CEN/TS 15476:2006 DD CEN/TS 15476:2006. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Devarda
DD CEN/TS 15477:2006 DD CEN/TS 15477:2006. Fertilizers. Determination of the water-soluble potassium content
DD CEN/TS 15478:2006 DD CEN/TS 15478:2006. Fertilizers. Determination of total nitrogen in urea
DD CEN/TS 15479:2006 DD CEN/TS 15479:2006. Fertilizers. Spectrophotometric determination of biuret in urea
PD IEC/TR 61912-1:2007 PD IEC/TR 61912-1:2007. Low-voltage switchgear and controlgear. Overcurrent protective devices. Application of short-circuit ratings
BS EN 12698-2:2007 BS EN 12698-2:2007. Chemical analysis of nitride bonded silicon carbide refractories. XRD methods
BS ISO 9183-1:2008 BS ISO 9183-1:2008. Tools for pressing. Wear plates for press dies. Type A
BS EN 942:2007 BS EN 942:2007. Timber in joinery. General requirements
08/30151717 DC 08/30151717 DC. BS ISO 23185. Assessment and benchmarking of terminological resources. General concepts, principles and requirements
BS 8213-4:2007 BS 8213-4:2007. Windows, doors and rooflights. Code of practice for the survey and installation of windows and external doorsets
BS EN 61937-1:2007 BS EN 61937-1:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. General
BS ISO/IEC 15459-6:2007 BS ISO/IEC 15459-6:2007. Information technology. Unique identifiers. Unique identifier for product groupings
DD ISO/PAS 27145-1:2006 DD ISO/PAS 27145-1:2006. Road vehicles. Implementation of WWH-OBD communication requirements. General information and use case definition
BS EN 60664-5:2007 BS EN 60664-5:2007. Insulation coordination for equipment within low-voltage systems. Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
DD ISO/PAS 27145-2:2006 DD ISO/PAS 27145-2:2006. Road vehicles. Implementation of WWH-OBD communication requirements. Common emissions-related data dictionary
DD ISO/PAS 27145-3:2006 DD ISO/PAS 27145-3:2006. Road vehicles. Implementation of WWH-OBD communication requirements. Common message dictionary
DD ISO/PAS 27145-4:2006 DD ISO/PAS 27145-4:2006. Road vehicles. Implementation of WWH-OBD communication requirements. Connection between vehicle and test equipment
BS EN 541:2006 BS EN 541:2006. Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications
BS ISO 18373-2:2008 BS ISO 18373-2:2008. Rigid PVC pipes. Differential scanning calorimetry (DSC) method. Measurement of the enthalpy of fusion of crystallites
BS EN ISO 7225:2007 BS EN ISO 7225:2007. Gas cylinders. Precautionary labels
BS EN 4199-006:2006 BS EN 4199-006:2006. Aerospace series. Bonding straps for aircraft. Round braid copper conductors for bonding straps, tin plated up to 150°C or nickel plated up to 260°C. Product standard
DD ISO/TS 10993-19:2006 DD ISO/TS 10993-19:2006. Biological evaluation of medical devices. Physico-chemical, morphological and topographical characterization of materials
08/30152038 DC 08/30152038 DC. BS ISO 24631-1. Radiofrequency identification of animals. Part 1. Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)
08/30152041 DC 08/30152041 DC. BS ISO 24631-2. Radiofrequency identification of animals. Part 2. Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
08/30152044 DC 08/30152044 DC. BS ISO 24631-3. Radio frequency identification of animals. Part 3. Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785
08/30152047 DC 08/30152047 DC. BS ISO 24631-4. Radio frequency identification of animals. Part 4. Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
PAS 11000:2006 PAS 11000:2006. Collaborative business relationships. A framework specification
BS EN ISO 15103-2:2007 BS EN ISO 15103-2:2007. Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Preparation of test specimens and determination of properties
DD CEN/TS 15531-1:2007 DD CEN/TS 15531-1:2007. Public transport. Service interface for real-time information relating to public transport operations. Context and framework
DD CEN/TS 15531-2:2007 DD CEN/TS 15531-2:2007. Public transport. Service interface for real-time information relating to public transport operations. Communications infrastructure
DD CEN/TS 15531-3:2007 DD CEN/TS 15531-3:2007. Public transport. Service interface for real-time information relating to public transport operations. Functional service interfaces
BS EN 3155-014:2006 BS EN 3155-014:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3155-015:2006 BS EN 3155-015:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3375-001:2007 BS EN 3375-001:2007. Aerospace series. Cable, electrical, for digital data transmission. Technical specification
BS EN 3375-006:2006 BS EN 3375-006:2006. Aerospace series. Cable, electrical, for digital data transmission. Single braid. 78 Ohms. Type XM. Product standard
BS EN 3375-007:2006 BS EN 3375-007:2006. Aerospace series. Cable, electrical, for digital data transmission. Double braid. 77 Ohms. Type WW. Product standard
BS EN 3645-003:2006 BS EN 3645-003:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Receptacle square flange mounting. Product standard
BS EN 3645-004:2006 BS EN 3645-004:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Receptacle, hermetic, square flange mounting. Product standard
BS EN 3645-005:2006 BS EN 3645-005:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Receptacle, hermetic, round flange, brasage mounting. Product standard
BS EN 3645-006:2006 BS EN 3645-006:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Protective cover for receptacle. Product standard
BS EN 3645-007:2007 BS EN 3645-007:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Protective cover for plug. Product standard
BS EN 3645-008:2007 BS EN 3645-008:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Non release plug with grounding ring. Product standard
BS EN 3645-009:2006 BS EN 3645-009:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Receptacle, round flange, jam nut mounting. Product standard
BS EN 3645-010:2006 BS EN 3645-010:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Receptacle, hermetic, round flange, jam nut mounting. Product standard
BS EN 3645-011:2006 BS EN 3645-011:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Lanyard release plug with grounding fingers. Type 1. Product standard
BS EN 3645-012:2006 BS EN 3645-012:2006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Lanyard release plug with grounding fingers. Type 2. Product standard
BS EN 3645-013:2007 BS EN 3645-013:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Dummy receptacle. Product standard
BS EN 3660-009:2007 BS EN 3660-009:2007. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style J, straight, sealed, for heat shrinkable boot. Product standard
BS EN 4008-015:2007 BS EN 4008-015:2007. Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories. Positioner for crimping tool M22520/2-01. Product standard
BS EN 4008-017:2006 BS EN 4008-017:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Head for crimping tool M22520/4-01. Product standard
PD CEN/TR 15545:2006 PD CEN/TR 15545:2006. Guide to the use of EN 545
PD CEN/TR 15321:2006 PD CEN/TR 15321:2006. Guidelines on the selection, use, care and maintenance of protective clothing
DD IEC/TS 62045-1:2006 DD IEC/TS 62045-1:2006. Multimedia security. Guideline for privacy protection of equipment and systems in and out of use. General
BS EN 15221-2:2006 BS EN 15221-2:2006. Facility management. Guidance on how to prepare facility management agreements
BS EN ISO 21969:2006 BS EN ISO 21969:2006. High-pressure flexible connections for use with medical gas systems
BS ISO/IEC 15939:2007 BS ISO/IEC 15939:2007. Systems and software engineering. Measurement process
BS EN ISO 1873-2:2007 BS EN ISO 1873-2:2007. Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 15529:2007 BS EN 15529:2007. Derivatives from coal pyrolysis. Terminology
DD CEN/TS 15534-2:2007 DD CEN/TS 15534-2:2007. Wood-plastics composites (WPC). Characterisation of WPC materials
DD CEN/TS 15534-3:2007 DD CEN/TS 15534-3:2007. Wood-plastics composites (WPC). Characterisation of WPC products
BS EN 3507:2006 BS EN 3507:2006. Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Hardened and tempered. Forgings. De ≤ 100 mm. 930 MPa ≤ Rm ≤ 1080 MPa
BS EN 3523:2007 BS EN 3523:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bar for machining. De ≤ 100 mm. 1080 MPa ≤ Rm ≤ 1280 MPa
BS EN 3524:2007 BS EN 3524:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 2 mm ≤ a ≤ 6 mm. 1080 MPa ≤ Rm ≤1280 MPa
BS EN 3525:2007 BS EN 3525:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Plate. 6 mm $3Q a ≤ 20 mm. 1080 MPa ≤ Rm ≤ 1280 MPa
BS EN 3526:2007 BS EN 3526:2007. Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm. 980 MPa ≤ Rm ≤ 1180 MPa
06/30152460 DC 06/30152460 DC. BS IEC 60335-2-72 AMD 2. Household and similar electrical appliances. Safety. Part 2-72. Particular requirements for automatic machines for floor treatment for commercial and industrial use
DD IEC/TS 62257-12-1:2007 DD IEC/TS 62257-12-1:2007. Recommendations for small renewable energy and hybrid systems for rural electrification. Selection of self-ballasted lamps (CFL) for rural electrification systems and recommendations for household lighting equipment
BS ISO 13373-2:2005 BS ISO 13373-2:2005. Condition monitoring and diagnostics of machines. Vibration condition monitoring. Processing, analysis and presentation of vibration data
BS EN 61937-2:2007 BS EN 61937-2:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Burst-info
06/30152560 DC 06/30152560 DC. BS IEC 60603-7. Connectors for electronic equipment. Part 7. Detail specification for 8-way, unshielded, free and fixed connectors
DD IEC/TS 62224:2007 DD IEC/TS 62224:2007. Multimedia home server systems. Conceptual model for digital rights management
BS EN 1729-2:2006 BS EN 1729-2:2006. Furniture. Chairs and tables for educational institutions. Safety requirements and test methods
BS EN 1729-1:2006 BS EN 1729-1:2006. Furniture. Chairs and tables for educational institutions. Functional dimensions
BS EN 3155-009:2006 BS EN 3155-009:2006. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
BS EN 3646-001:2007 BS EN 3646-001:2007. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Technical specification
BS 8491:2008 BS 8491:2008. Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
BS ISO 12161:2006 BS ISO 12161:2006. Road vehicles. Endurance braking systems of motor vehicles and towed vehicles. Test procedures
06/30152634 DC 06/30152634 DC. BS IEC 62433. Models of Integrated Circuits for EMI behavioural simulation
06/30152653 DC 06/30152653 DC. BS IEC 61360-1. Standard data element types with associated classification scheme for electric components. Part 1. Definitions. Principles and methods
BS EN ISO 15302:2007 BS EN ISO 15302:2007. Animal and vegetable fats and oils. Determination of benzo[a]pyrene content. Reverse-phase high-performance liquid chromatography method
06/30152690 DC 06/30152690 DC. BS ISO 1161 DAmd 1. Series 1. Freight containers. Corner fittings. Specification
BS ISO 8013:2006 BS ISO 8013:2006. Rubber, vulcanized. Determination of creep in compression or shear
ISO5478 : 2006 EDTN3 ISO5478 : 2006 EDTN3. ISO 5478 Rubber - Determination of styrene content - Nitration method
ISO6225-1 : 2006 EDTN2 ISO6225-1 : 2006 EDTN2. ISO 6225-1 Rubber, raw, natural - Determination of castor oil content. Part 1: Determination of castor oil glyceride content by thin-layer chromatography
BS ISO 13381-1:2004 BS ISO 13381-1:2004. Condition monitoring and diagnostics of machines. Prognostics. General guidelines
BS EN 50342-2:2007 BS EN 50342-2:2007. Lead-acid starter batteries. Dimensions of batteries and marking of terminals
PD CEN ISO/TR 20572:2007 PD CEN ISO/TR 20572:2007. Footwear. Performance requirements for components for footwear. Accessories
PD CEN ISO/TR 20879:2007 PD CEN ISO/TR 20879:2007. Footwear. Performance requirements for components for footwear. Uppers
PD CEN ISO/TR 20880:2007 PD CEN ISO/TR 20880:2007. Footwear. Performance requirements for components for footwear. Outsoles
PD CEN ISO/TR 20881:2007 PD CEN ISO/TR 20881:2007. Footwear. Performance requirements for components for footwear. Insoles
PD CEN ISO/TR 20882:2007 PD CEN ISO/TR 20882:2007. Footwear. Performance requirements for components for footwear. Lining and insocks
PD CEN ISO/TR 20883:2007 PD CEN ISO/TR 20883:2007. Footwear. Performance requirements for components for footwear. Shanks
PD CEN ISO/TR 22648:2007 PD CEN ISO/TR 22648:2007. Footwear. Performance requirements for components for footwear. Stiffeners and toepuffs
BS EN 62317-1:2007 BS EN 62317-1:2007. Ferrite cores. Dimensions. General specification
BS ISO 6101-5:2006 BS ISO 6101-5:2006. Rubber. Determination of metal content by atomic absorption spectrometry. Determination of iron content
PD ISO/TR 27609:2007 PD ISO/TR 27609:2007. Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
06/30152938 DC 06/30152938 DC. BS IEC 60335-2-49 AMD 1. Household and similar electrical appliances. Safety. Part 2-49: Particular requirements for commercial electric hot cupboards
06/30152958 DC 06/30152958 DC. BS IEC 60335-2-64 AMD 1. Household and similar electrical appliances. Safety. Part 2-64. Particular requirements for commercial electric kitchen machines
BIP 0068:2006 BIP 0068:2006. Delivering and managing real world network security
DD CEN/TS 15523:2006 DD CEN/TS 15523:2006. Postal service. Statement of mailing submission
DD CEN/TS 15524:2006 DD CEN/TS 15524:2006. Postal service. Customer-directed information including track and trace. General concepts and definitions
ISO/TS24348 : 2007 EDTN2 ISO/TS24348 : 2007 EDTN2. ISO/TS24348 : 2007 Ophthalmic optics. Spectacle frames. Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames
06/30153072 DC 06/30153072 DC. BS IEC 61280-4-1. Fibre optic communication subsystem test procedures. Part 4-1. Cable plant and links. Premises cabling attenuation measurement
06/30153107 DC 06/30153107 DC. BS IEC 62460. Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations
06/30153111 DC 06/30153111 DC. BS IEC 60695-11-11. Fire hazard testing. Part 11-11. Test flames. Determination of the ignition characteristic heat flux from a flame source
ISO/TR22790 : 2007 EDTN1 ISO/TR22790 : 2007 EDTN1. ISO/TR22790 : 2007 Health informatics. Functional characteristics of prescriber support systems
BS EN 60904-9:2007 BS EN 60904-9:2007. Photovoltaic devices. Solar simulator performance requirements
06/30153142 DC 06/30153142 DC. BS EN 15544. Tiled/mortared stoves. Calculation method
06/30153145 DC 06/30153145 DC. BS IEC 62295. Common communication protocol for generic linkage on heterogeneous networks
BIP 2114:2006 BIP 2114:2006. ISO 9001:2000 case studies. Experiences from auditing practice
BS EN ISO 11979-1:2006 BS EN ISO 11979-1:2006. Ophthalmic implants. Intraocular lenses. Vocabulary
BS EN 15542:2008 BS EN 15542:2008. Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods
08/30153234 DC 08/30153234 DC. BS ISO 17484-2. Plastics piping systems. Multilayer pipe systems for indoor gas installations. Part 2. Code of pratice
06/30153237 DC 06/30153237 DC. BS ISO 16003. Components for gaseous media and fire extinguishing systems. Requirements and test methods. Container valve assemblies and their actuators, selector valves and their actuators, nozzles, flexible connectors, and check valves and non-return valves
BS EN 13577:2007 BS EN 13577:2007. Chemical attack on concrete. Determination of aggressive carbon dioxide content in water
06/30153256 DC 06/30153256 DC. BS EN 14079-2. Non-active medical devices. Properties for compresses and wound packing products for medical use. Part 2. Test methods for absorbent cotton gauze and absorbent cotton and viscose gauze
DD ISO/TS 16952-1:2007 DD ISO/TS 16952-1:2007. Technical product documentation. Reference designation system. General application rules
06/30153305 DC 06/30153305 DC. BS ISO 3356. Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder. Determination of residual alkaline phosphatase
06/30153327 DC 06/30153327 DC. BS ISO 20182. Refractory test piece preparation. Gunning refractory panels by the pneumatic-nozzle mixing type guns
06/30153342 DC 06/30153342 DC. BS IEC 61746-. Calibration of optical time-domain reflectometers (OTDR). Part 1. OTDRf or single-mode fibres
06/30153345 DC 06/30153345 DC. BS IEC 61746-2. Calibration of optical time-domain reflectometers (OTDR) . Part 2. OTDR for multimode fibres
PD IEC/TR 62469:2007 PD IEC/TR 62469:2007. Guidance for residual stress measurement of optical fibre
06/30153363 DC 06/30153363 DC. BS IEC 60079-31. Explosive atmospheres. Part 31. Equipment. Protection by enclosure "tD"
PD ISO/TR 25417:2007 PD ISO/TR 25417:2007. Acoustics. Definitions of basic quantities and terms
CWA 15557:2006 CWA 15557:2006. Scenarios and XML templates for B2B in textile clothing manufacturing and retail
06/30153399 DC 06/30153399 DC. IEC 62481-1. DLNA Home networked device interoperability guidelines. Part 1. Architecture and Protocols
06/30153404 DC 06/30153404 DC. IEC 62481-2. DLNA Home networked device interoperability guidelines. Part 2. Media format
DD ISO/TS 11073-92001:2007 DD ISO/TS 11073-92001:2007. Health informatics. Medical waveform format. Encoding rules
BS EN ISO 10993-2:2006 BS EN ISO 10993-2:2006. Biological evaluation of medical devices. Animal welfare requirements
BS EN ISO 10993-11:2006 BS EN ISO 10993-11:2006. Biological evaluation of medical devices. Tests for systemic toxicity
ISO/IECTR24800-1 : 2007 EDTN1 ISO/IECTR24800-1 : 2007 EDTN1. ISO/IEC/TR24800 : 2007 Information technology - JPSearch. Part 1:System framework and components
BS EN 61157:2007 BS EN 61157:2007. Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
06/30153516 DC 06/30153516 DC. EN 60745-2-17 AMD. Hand-held motor-operated electric tools. Safety. Part 2-17. Particular requirements for routers
06/30153520 DC 06/30153520 DC. EN 62468. The marking for presence and absence of the specified chemical substance in materials, components and mounted boards in electrical and electronic equipment
PP 7722:2006 BOOK PP 7722:2006 BOOK. Designing safe machinery. Guidance for higher education to the standards and regulations
PP 7722:2006 CD & BOOK PP 7722:2006 CD & BOOK. Designing safe machinery. Guidance for higher education to the standards and regulations (book and CD)
BS EN ISO 10524-1:2006 BS EN ISO 10524-1:2006. Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
DD CEN ISO/TS 25377:2007 DD CEN ISO/TS 25377:2007. Hydrometric uncertainty guide
BS EN 15111:2007 BS EN 15111:2007. Foodstuffs. Determination of trace elements. Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
08/30153603 DC 08/30153603 DC. BS ISO 10957. Information and documentation. International standard music number (ISMN)
BS EN 12004:2007 BS EN 12004:2007. Adhesives for tiles. Requirements, evaluation of conformity, classification and designation
BS EN 1308:2007 BS EN 1308:2007. Adhesives for tiles. Determination of slip
BS EN 1323:2007 BS EN 1323:2007. Adhesives for tiles. Concrete slabs for tests
BS EN 1324:2007 BS EN 1324:2007. Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives
BS EN 1346:2007 BS EN 1346:2007. Adhesives for tiles. Determination of open time
BS EN 1347:2007 BS EN 1347:2007. Adhesives for tiles. Determination of wetting capability
BS EN 1348:2007 BS EN 1348:2007. Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives
06/30153646 DC 06/30153646 DC. EN 61558-2-23. Safety of power transformers, power supplies, reactors and similar products. Part 2-23. Particular requirements for transformers and power supplies for control sites
06/30153650 DC 06/30153650 DC. EN 61914. Cable cleats for electrical installations
ISO/IEC14543-2-1 : 2006 EDTN1 ISO/IEC14543-2-1 : 2006 EDTN1. ISO/IEC 14543-2-1 Information technology - Home electronic systems (HES) architecture -. Part 2-1: Introduction and device modularity
ISO/IEC14543-3-1 : 2006 EDTN1 ISO/IEC14543-3-1 : 2006 EDTN1. ISO/IEC 14543-3-1 Information technology - Home Electronic Systems (HES) Architecture -. Part 3-1: Communication layers - Application layer for network based control of HES Class 1
ISO/IEC14543-3-2 : 2006 EDTN1 ISO/IEC14543-3-2 : 2006 EDTN1. ISO/IEC 14543-3-2 Information technology - Home electronic systems (HES) architecture -. Part 3-2: Communication layers - Transport, network and general parts of data link layer for network based control of HES Class 1
BS ISO 27107:2008 BS ISO 27107:2008. Animal and vegetable fats and oils. Determination of peroxide value. Potentiometric end-point determination
BS EN 50116:2006 BS EN 50116:2006. Information technology equipment. Routine electrical safety testing in production
WD/ISO/IEC23000-2 : 2006 EDTN1 WD/ISO/IEC23000-2 : 2006 EDTN1. ISO/IEC 23000-2 Information technology - Multimedia application format (MPEG-A). Part 2: MPEG music player application format
ISO/IEC23004-5 : 2008 EDTN1 ISO/IEC23004-5 : 2008 EDTN1. ISO/IEC23004-5 : 2008 Information technology. Multimedia Middleware. Part 5. Component download
ISO/IEC23004-6 : 2008 EDTN1 ISO/IEC23004-6 : 2008 EDTN1. ISO/IEC23004-6 : 2008 Information technology. Multimedia Middleware. Part 6. Fault management
ISO/IEC23004-7 : 2008 EDTN1 ISO/IEC23004-7 : 2008 EDTN1. ISO/IEC23004-7 : 2008 Information technology. Multimedia Middleware. Part 7. System integrity management
CWA 15574:2006 CWA 15574:2006. Commission Recommendation 1994/820/EC October 1994, proposed revision with the requirements of Directive 2001/115/EC, present day e-commerce practices and revised definition of EDI electronic data interchange
CWA 15575:2006 CWA 15575:2006. The list of invoice content details identified in the Directive 2001/115/EC expressed as UN/CEFACT core components
CWA 15576:2006 CWA 15576:2006. Recommendation to allow coded identifiers as an alternative to the current unstructured clear text identifications
CWA 15577:2006 CWA 15577:2006. A standardised set of codes with definitions to replace plain text clauses in eInvoice messages for VAT exemptions
CWA 15578:2006 CWA 15578:2006. Survey of VAT data element usage in the Member States and the use of codes for VAT Exemptions
CWA 15580:2006 CWA 15580:2006. Storage of electronic invoices
CWA 15581:2006 CWA 15581:2006. Guidelines for einvoicing service providers
CWA 15582:2006 CWA 15582:2006. eInvoice reference model for EU VAT purposes specification
06/30153824 DC 06/30153824 DC. ISO 26845. Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma methods
BS ISO 13300-2:2006 BS ISO 13300-2:2006. Sensory analysis. General guidance for the staff of a sensory evaluation laboratory. Recruitment and training of panel leaders
DD 266:2007 DD 266:2007. Design of accessible housing. Lifetime home. Code of practice
BS EN 61204-7:2006 BS EN 61204-7:2006. Low voltage power supplies, d.c. Output. Safety requirements
06/30153862 DC 06/30153862 DC. BS ISO 8031. Rubber and plastics hoses and hose assemblies. Determination of electrical properties
08/30153875 DC 08/30153875 DC. BS ISO 25720. Genomic sequence variation markup language
BS EN 4533-001:2006 BS EN 4533-001:2006. Aerospace series. Fibre optic systems. Handbook. Termination methods and tools
BS EN 4533-003:2006 BS EN 4533-003:2006. Aerospace series. Fibre optic systems. Handbook. Looming and installation practices
BS EN 3973:2006 BS EN 3973:2006. Aerospace series. Steel FE-CM3801 (X5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened. Investment casting. De ≤ 50 mm. Rm ≥ 1030 MPa
BS EN 3972:2006 BS EN 3972:2006. Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Hardened and tempered. Bar for machining. De ≤ 50 mm. 1250 MPa ≤ Rm ≤ 1400 MPa
BS EN 3971:2006 BS EN 3971:2006. Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Annealed. Forging stock. a or D ≤ 350 mm
BS EN 3969:2006 BS EN 3969:2006. Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm
BS EN 3816:2006 BS EN 3816:2006. Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened and cold rolled. Sheet and strip. a ≤ 3 mm. Rm ≥ 800 MPa
BS EN 2947:2006 BS EN 2947:2006. Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm
ISO10303-522 : 2006 EDTN2 ISO10303-522 : 2006 EDTN2. ISO 10303-522 Industrial automation systems and integration - Product data representation and exchange -. Part 522: Application interpreted construct: Machining features
KIT 192 KIT 192. Information and documentation standards kit
06/30153920 DC 06/30153920 DC. BS EN 15548-1. Thermal insulation products for building equipment and industrial installations. Determination of thermal resistance by means of the guarded hot plate method. Part 1. Measurements at elevated temperatures from 100°C to 850°C
06/30153938 DC 06/30153938 DC. ISO 27470. Aircraft ground equipment. Upper deck catering vehicle. Functional requirements
BS EN 12899-3:2007 BS EN 12899-3:2007. Fixed, vertical road traffic signs. Delineator posts and retroreflectors
BS EN 12899-4:2007 BS EN 12899-4:2007. Fixed, vertical road traffic signs. Factory production control
BS EN 12899-5:2007 BS EN 12899-5:2007. Fixed, vertical road traffic signs . Initial type testing
ISO/IEC28361 : 2007 EDTN1 ISO/IEC28361 : 2007 EDTN1. ISO/IEC 28361 Information technology - Telecommunications and information exchange between systems - Near Field Communication Wired Interface (NFC-WI)
BIP 2116:2006 BIP 2116:2006. The Translation Service Provider's Guide to BS EN 15038
06/30153965 DC 06/30153965 DC. ISO/IEC 28630. Information technology. Determination of chemical emission rates from electronic equipment
BS EN 50173-3:2007 BS EN 50173-3:2007. Information technology. Generic cabling systems. Industrial premises
BS ISO 15930-7:2008 BS ISO 15930-7:2008. Graphic technology. Prepress digital data exchange using PDF. Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6
06/30154044 DC 06/30154044 DC. EN 12566-7. Small wastewater treatment systems for up to 50 PT. Part 7. Prefabricated tertiary treatment units
BS EN 50464-1:2007 BS EN 50464-1:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. General requirements
BS ISO/IEC 15457-1:2008 BS ISO/IEC 15457-1:2008. Identification cards. Thin flexible cards. Physical characteristics
BS 848-9:2007, ISO 13348:2007 BS 848-9:2007, ISO 13348:2007. Fans for general purposes. Tolerances, methods of conversion and technical data presentation
DD ISO/TS 23165:2006 DD ISO/TS 23165:2006. Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
BS EN 2003-009:2007 BS EN 2003-009:2007. Aerospace series. Test methods. Titanium and titanium alloys. Determination of surface contamination
PD ISO/TR 9212:2006 PD ISO/TR 9212:2006. Hydrometry. Measurement of liquid flow in open channels. Methods of measurement of bedload discharge
BS EN 2003-010:2007 BS EN 2003-010:2007. Aerospace series. Titanium and titanium alloys. Test methods. Sampling for determination of hydrogen content
BS EN 545:2006 BS EN 545:2006. Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
ISO/IECTR25438 : 2006 EDTN1 ISO/IECTR25438 : 2006 EDTN1. ISO/IEC TR 25438 Information technology - Common Language Infrastructure (CLI) - Technical Report: Common Generics
BS ISO 24101-1:2008 BS ISO 24101-1:2008. Intelligent transport systems. Communications access for land mobiles (CALM). Application management. General requirements
BS ISO 15077:2008 BS ISO 15077:2008. Tractors and self-propelled machinery for agriculture. Operator controls. Actuating forces, displacement, location and method of operation
BS EN 975-2:2004 BS EN 975-2:2004. Sawn timber. Appearance grading of hardwoods. Poplars
06/30154256 DC 06/30154256 DC. ISO 9650-3. Small craft. Inflatable liferafts. Part 3. Materials
BS EN 12967-3:2007 BS EN 12967-3:2007. Health informatics. Service architecture. Computational viewpoint
BIP 0062:2006 BIP 0062:2006. IT Service Management Collection
BS EN 15536:2007 BS EN 15536:2007. Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods
DC07/30154389 DC07/30154389. BS ISO 7619-1 AMD1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness) DAM 1: Addition of precision statement’
BS ISO 7619-1:2004+A1:2008 BS ISO 7619-1:2004+A1:2008. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS EN 12697-31:2007 BS EN 12697-31:2007. Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by gyratory compactor
06/30154411 DC 06/30154411 DC. ISO 25297. Optics and photonics. Fundamental standards. Electronic exchange of optical data
BS EN ISO 14044:2006 BS EN ISO 14044:2006. Environmental management. Life cycle assessment. Requirements and guidelines
BS EN ISO 14040:2006 BS EN ISO 14040:2006. Environmental management. Life cycle assessment. Principles and framework
BIP 0067:2006 BIP 0067:2006. A guide to developing a retention and disposal schedule for business information
BS EN ISO 12680-1:2007 BS EN ISO 12680-1:2007. Methods of test for refractory products. Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration
06/30154447 DC 06/30154447 DC. IEC 62449. Connectors for electronic equipment. Product requirements. Detail specification for SCA-2 (Single Connector Attach -2) unshielded connectors
BS EN 15550:2007 BS EN 15550:2007. Animal feeding stuffs. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
BS EN 60947-2:2006 BS EN 60947-2:2006. Low-voltage switchgear and control gear. Circuit-breakers
BS EN 263:2008 BS EN 263:2008. Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
06/30154517 DC 06/30154517 DC. EN 61966-2-5. Multimedia systems and equipment. Colour measurement and management. Part 2-5. Colour management. Optional RGB colour space. opRGB
PD CEN/TR 15522-1:2006 PD CEN/TR 15522-1:2006. Oil spill identification. Waterborne petroleum and petroleum products. Sampling
ISO8510-2 : 2006 EDTN2 ISO8510-2 : 2006 EDTN2. ISO8510-2 : : 2006 Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly. Part 2 : 180 degree peel
08/30154538 DC 08/30154538 DC. BS ISO 18857-2. Water quality. Determination of selected alkylphenols. Part 2. Determination of alkylphenols, alkylphenol ethoxylates and bisphenol A. Method for non-filtered samples using solidphase extraction and gas chromatography with mass selective detection after derivation
06/30154548 DC 06/30154548 DC. EN 60601-2-19. Medical electrical equipment. Part 2-19. Particular requirements for basic safety and essential performance of baby incubators
06/30154556 DC 06/30154556 DC. EN 60601-2-20. Medical electrical equipment. Part 2-20. Particular requirements for basic safety and essential performance of transport incubators
PD ISO/TR 17737:2007 PD ISO/TR 17737:2007. Workplace air. Guidelines for selecting analytical methods for sampling and analyzing isocyanates in air
06/30154593 DC 06/30154593 DC. EN 61988-2-3. Plasma display panels. Part 2-3. Measuring methods. Quality
ISO2739 : 2006 EDTN2 ISO2739 : 2006 EDTN2. ISO2739 : 2006 Sintered metal bushes - Determination of radial crushing strength
08/30154605 DC 08/30154605 DC. BS ISO 15223-2. Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied. Part 2. Symbol development, selection and validation
BS ISO 16367:2008 BS ISO 16367:2008. Tools for pressing. Guide plates. U- and V-blocks
DD CEN/TS 1591-4:2007 DD CEN/TS 1591-4:2007. Flanges and their joints. Design rules for gasketed circular flange connections. Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
06/30154694 DC 06/30154694 DC. EN 267 AMD 1. Automatic forced draught burners for liquid fuels
06/30154705 DC 06/30154705 DC. EN 267 AMD 2. Automatic forced draught burners for liquid fuels
BS ISO 2782:2006 BS ISO 2782:2006. Rubber, vulcanized or thermoplastic. Determination of permeability to gases
BS EN ISO 15535:2006 BS EN ISO 15535:2006. General requirements for establishing anthropometric databases
DD ISO/TS 10993-20:2006 DD ISO/TS 10993-20:2006. Biological evaluation of medical devices. Principles and methods for immunotoxicology testing of medical devices
BS EN 50378-3-2:2007 BS EN 50378-3-2:2007. Passive components to be used in optical fibre communication systems. Product specifications. Type 4/8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
06/30154747 DC 06/30154747 DC. EN 50377-2-2. Product specification for connectors adaptors and patchcords to be used in single mode optical fibre communication systems. Part 2-2. Type FC/APC 8 terminated on IEC 60793-2-50 Category B1.1 and B1.3 single mode fibre, Zirconia ferrule, for Category C
BS EN 50377-8-2:2007 BS EN 50377-8-2:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
BS EN 50377-6-2:2007 BS EN 50377-6-2:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U
BS EN 50377-8-3:2007 BS EN 50377-8-3:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C
BS EN 50377-8-4:2007 BS EN 50377-8-4:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
06/30154770 DC 06/30154770 DC. EN 60050-212. International Electrotechnical Vocabulary (IEC). Chapter 212. Insulating solids, liquids and gases
BS EN 62305-1:2006 BS EN 62305-1:2006. Protection against lightning. General principles
BS EN 62305-3:2006 BS EN 62305-3:2006. Protection against lightning. Physical damage to structures and life hazard
BS EN 61290-7-1:2007 BS EN 61290-7-1:2007. Optical amplifiers. Test methods. Out-of-band insertion losses. Filtered optical power meter method
BS EN 61291-2:2007 BS EN 61291-2:2007. Optical amplifiers. Digital applications. Performance specification template
BS 594987:2007 BS 594987:2007. Asphalt for roads and other paved areas - Specification for transport, laying and compaction and type testing protocols.
BS EN 14116:2007 BS EN 14116:2007. Tanks for transport of dangerous goods. Digital interface for the product recognition device
BS ISO 5496:2006 BS ISO 5496:2006. Sensory analysis. Methodology. Initiation and training of assessors in the detection and recognition of odours
06/30154871 DC 06/30154871 DC. BS ISO 4254-8. Agricultural machinery. Safety. Part 8. Solid fertilizer distributors
BS EN 196-7:2007 BS EN 196-7:2007. Methods of testing cement. Methods of taking and preparing samples of cement
BS ISO 12082:2006 BS ISO 12082:2006. Processed cheese and processed cheese products. Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid
ISO3369 : 2006 EDTN2 ISO3369 : 2006 EDTN2. ISO3369 :2006 Impermeable sintered metal materials and hardmetals - Determination of density
08/30154948 DC 08/30154948 DC. BS ISO 21809-4. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 4. Polyethylene coatings (2-layer PE)
BS EN 4382:2006 BS EN 4382:2006. Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm
BS EN 4383:2006 BS EN 4383:2006. Aerospace series. Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock
BS EN 3976:2006 BS EN 3976:2006. Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content
BS EN 3668:2006 BS EN 3668:2006. Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm
BS EN 3114-004:2006 BS EN 3114-004:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. Microstructure of sheet for superplastic forming
BS EN 3114-003:2006 BS EN 3114-003:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. Microstructure of plate
BS EN 3114-002:2007 BS EN 3114-002:2007. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. Microstructure of bars, sections, forging stock and forgings
BS EN 3114-001:2006 BS EN 3114-001:2006. Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products. General requirements
BS EN 3339:2006 BS EN 3339:2006. Aerospace series. Aluminium alloy AL-P7010-T76. Die Forgings. a ≤ 200 mm
PAS 2010:2006 PAS 2010:2006. Planning to halt the loss of biodiversity
BS 8494:2007 BS 8494:2007. Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air. Requirements and test methods
BS EN 50377-8-5:2007 BS EN 50377-8-5:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U
BS EN 50377-8-6:2007 BS EN 50377-8-6:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-7:2007 BS EN 50377-8-7:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-8:2007 BS EN 50377-8-8:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
06/30155065 DC 06/30155065 DC. EN 61754-24. Fibre optic connector interfaces. Part 24. Type SC-RJ connector family
BS EN 15330-2:2008 BS EN 15330-2:2008. Surfaces for sports areas. Synthetic turf and needle- punched surfaces primarily designed for outdoor use. Specification for needle-punched surfaces
BS EN 15301-2:2007 BS EN 15301-2:2007. Surfaces for sports areas. Determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory
BS ISO 12043:2007 BS ISO 12043:2007. Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
BS ISO 246:2007 BS ISO 246:2007. Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
06/30155268 DC 06/30155268 DC. ISO 12460-2. Wood-based panels. Determination of formaldehyde release. Part 2. Small-scale chamber method
06/30155271 DC 06/30155271 DC. ISO 12460-3. Wood-based panels. Determination of formaldehyde release. Part 3. Gas analysis method
ISO12460-3 : 2008 EDTN1 ISO12460-3 : 2008 EDTN1. ISO 12460-3 Wood-based panels - Determination of formaldehyde release. Part 3: Gas analysis method
06/30155274 DC 06/30155274 DC. ISO 12460-4. Wood-based panels. Determination of formaldehyde release. Part 4. Desiccator method
ISO12460-4 : 2008 EDTN1 ISO12460-4 : 2008 EDTN1. ISO 12460-4 Wood-based panels - Determination of formaldehyde release. Part 4: Desiccator method
BS 7176:2007 BS 7176:2007. Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS EN 14528:2007 BS EN 14528:2007. Bidets. Functional requirements and test methods
06/30155363 DC 06/30155363 DC. EN 60853-1 AMD 2. Calculation of cyclic and emergency current rating of cables. Part 1. Cyclic rating factor for cables up to and including 18/30 (36) kV
06/30155366 DC 06/30155366 DC. EN 60853-2 AMD 1. Calculation of cyclic and emergency current rating of cables. Part 2. Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
06/30155368 DC 06/30155368 DC. EN 14879-6. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 6. Combined linings with tile and brick layers
BS EN 61228:2008 BS EN 61228:2008. Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
ISO/TR15403-2 : 2006 EDTN1 ISO/TR15403-2 : 2006 EDTN1. ISO/TR 15403-2 Natural gas - Natural gas for use as a compressed fuel for vehicles. Part 2: Specification of the quality
06/30155398 DC 06/30155398 DC. EN 2234. Cables, electrical, fire resistant. Technical specification
06/30155419 DC 06/30155419 DC. EN 61058-2-1 AMD 2. Switches for appliances. Part 2-1. Particular requirements for cord switches
ISO/PAS26183 : 2006 EDTN1 ISO/PAS26183 : 2006 EDTN1. ISO/PAS 26183 SASIG Product data quality guidelines for the global automotive industry
06/30155498 DC 06/30155498 DC. ISO 4126-10. Safety devices for protection against excessive pressure. Part 10. Sizing of safety valves and connected inlet and outlet lines for gas/liquid two-phase flow
BS ISO 28000:2007 BS ISO 28000:2007. Specification for security management systems for the supply chain
DD ISO/PAS 28004:2006 DD ISO/PAS 28004:2006. Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000
BS ISO 1739:2006 BS ISO 1739:2006. Butter. Determination of the refractive index of the fat (reference method)
BS ISO 3889:2006 BS ISO 3889:2006. Milk and milk products. Specification of Mojonnier-type fat extraction flasks
06/30155557 DC 06/30155557 DC. EN 71-5 AMD 2. Safety of toys. Part 5. Chemical toys (sets) other than experimental sets
BS 6231:2006 BS 6231:2006. Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
BS 7671:2008 BS 7671:2008. Requirements for electrical installations. IEE Wiring Regulations. Seventeenth edition
06/30155617 DC 06/30155617 DC. EN 60076-12. Power transformers. Part 12. Loading guide for dry-type power transformers
BS EN ISO 9169:2006 BS EN ISO 9169:2006. Air quality. Definition and determination of performance characteristics of an automatic measuring system
ISO/IEC 21000-8:2008 (CDROM)HEADER EDTN2 ISO/IEC 21000-8:2008 (CDROM)HEADER EDTN2. ISO/IEC21000-8 : 2008 Information technology. Multimedia framework (MPEG-21). Part 8. Reference Software
ISO/TS22809 : 2007 EDTN1 ISO/TS22809 : 2007 EDTN1. ISO/TS22809 : 2007 Non-destructive testing. Discontinuities in specimens for use in qualification examinations
BS EN 50194-2:2006 BS EN 50194-2:2006. Electrical apparatus for the detection of combustible gases in domestic premises. Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises. Additional test methods and performance requirements
BS ISO 8470:2006 BS ISO 8470:2006. Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
06/30155753 DC 06/30155753 DC. ISO 1750. Pesticides and other agrochemicals. Common names
BS EN 61996-2:2006 BS EN 61996-2:2006. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results
BIP 3073:2006 BIP 3073:2006. Environment labelling and lifecycle assessment CD-ROM
BIP 3075:2006 BIP 3075:2006. Environment management systems CD-ROM
BIP 0060:2006 BIP 0060:2006. Spatial datasets for geographical referencing. BS 7666 collection CD-ROM
DD CEN/TS 14159:2007 DD CEN/TS 14159:2007. Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
BS EN ISO 3251:2008 BS EN ISO 3251:2008. Paints, varnishes and plastics. Determination of non- volatile-matter content
06/30155776 DC 06/30155776 DC. BS EN 197-4 AMD 1. Cement. Part 4. Composition, specifications and conformity criteria for low early strength blast furnace cements
BS EN 62379-1:2007 BS EN 62379-1:2007. Common control interface for networked digital audio and video products. General
BS EN 13999-2:2007 BS EN 13999-2:2007. Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
BS EN ISO 21415-1:2007 BS EN ISO 21415-1:2007. Wheat and wheat flour. Gluten content. Determination of wet gluten by a manual method
BS EN ISO 21415-3:2007 BS EN ISO 21415-3:2007. Wheat and wheat flour. Gluten content. Determination of dry gluten from wet gluten by an oven drying method
BS EN ISO 21415-4:2007 BS EN ISO 21415-4:2007. Wheat and wheat flour. Gluten content. Determination of dry gluten from wet gluten by a rapid drying method
08/30155823 DC 08/30155823 DC. BS EN ISO 13503-2 AMD1. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 2. Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
DD CEN/TS 15590:2007 DD CEN/TS 15590:2007. Solid recovered fuels. Determination of potential rate of microbial self heating using the real dynamic respiration index
PD CEN/TR 15591:2007 PD CEN/TR 15591:2007. Solid recovered fuels. Determination of the biomass content based on the 14C method
06/30155852 DC 06/30155852 DC. BS EN 60286-3-VI. Packaging of components for automatic handling. Part 3. Type VI. Packaging of surface mount components on blister carrier tapes 4 mm in width
06/30155866 DC 06/30155866 DC. BS EN 62451. HSSDC-2 shielded connectors
06/30155872 DC 06/30155872 DC. IEC/TS 62452. Testing and performance requirements for high speed serial and parallel-serial copper links
BS EN 3476:2006 BS EN 3476:2006. Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 3479:2007 BS EN 3479:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Plate. 6 mm < a ≤ 20 mm. 1070 MPa ≤ Rm ≤ 1220 MPa
BS EN 3490:2007 BS EN 3490:2007. Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Bar for machining. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1100 MPa
BS EN 3491:2006 BS EN 3491:2006. Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Forgings. De ≤ 100 mm. 900 MPa ≤ Rm ≤ 1100 MPa
BS EN 3527:2007 BS EN 3527:2007. Aerospace series. Steel FE-PL1504 (33CrMoV12). Air melted. Softened. Forging stock. a or D ≤ 300 mm
BS EN 3531:2007 BS EN 3531:2007. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a ≤ 6 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 3532:2007 BS EN 3532:2007. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Plate. 6 mm $3Q a ≤ 40 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 3671:2007 BS EN 3671:2007. Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm
BS EN 3678:2007 BS EN 3678:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa
BS EN 3684:2007 BS EN 3684:2007. Aerospace series. Test methods. Titanium alloy wrought products. Determination of β transus temperature. Metallographic method
BS EN 2469:2007 BS EN 2469:2007. Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa
BS EN 2821:2007 BS EN 2821:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1310 MPa
KIT 193 KIT 193. Software engineering. Product quality kit
BS EN 140401-803:2007 BS EN 140401-803:2007. Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 140401-802:2007 BS EN 140401-802:2007. Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2
BS EN 140401-801:2007 BS EN 140401-801:2007. Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 0,1; 0,25; 0,5; 1
ERROR - CWA15596 : 2006 ERROR - CWA15596 : 2006.
CWA 15596:2006 CWA 15596:2006. Code of practice on cleanability of commercial food equipment used in the retail and catering sectors
BS EN 140100:2008 BS EN 140100:2008. Sectional specification. Fixed low power film resistors
PD CLC/TR 50456:2008 PD CLC/TR 50456:2008. Alarm systems. Guidelines to achieving compliance with EC directives for equipment of alarm systems
BS ISO 28004:2007 BS ISO 28004:2007. Security management systems for the supply chain. Guidelines for the implementation of ISO 28000
BS EN 137:2006 BS EN 137:2006. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking
DD ISO/TS 3716:2006 DD ISO/TS 3716:2006. Hydrometry. Functional requirements and characteristics of suspended-sediment samplers
BS 6400-1:2006 BS 6400-1:2006. Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m3/h. Low pressure (2nd family gases)
08/30156013 DC 08/30156013 DC. BS EN ISO 21987. Ophthalmic optics. Mounted spectacle lenses
BIP 2089:2006 BIP 2089:2006. A Guide to corporate social responsibility
DD ISO/TS 23081-2:2007 DD ISO/TS 23081-2:2007. Information and documentation. Records management processes. Metadata for records. Conceptual and implementation issues
08/30156074 DC 08/30156074 DC. BS EN 1012-3. Compressors and vacuum pumps. Safety requirements. Part 3. Process compressors
06/30156096 DC 06/30156096 DC. ISO CEN TS 12977-3. Performance test methods. Thermal solar systems and components. Custom built systems. Part 3. Performance test methods for solar water heater stores
BS EN ISO 1248:2008 BS EN ISO 1248:2008. Iron oxide pigments. Specifications and methods of test
BS EN 3475-203:2006 BS EN 3475-203:2006. Aerospace series. Cables, electrical, aircraft use. Test methods. Dimensions
06/30156146 DC 06/30156146 DC. IEC/TS 62450. Technical specification for 40 pin SCA 2 connector with parallel selection
06/30156182 DC 06/30156182 DC. BS EN 61753-022-2. Fibre optic interconnecting devices and passive components. Performance standard. Part 022-2. Fibre optic connectors terminated on multimode fibre for category C. Controlled environment
06/30156187 DC 06/30156187 DC. BS EN 61753-121-2. Fibre optic interconnecting devices and passive components. Terminated cable assemblies part. Part 121-2. Performance standard for simplex and duplex cords with singlemode fibre optic cylindrical ferrule connectors for category C. Controlled environment
BS EN 14682:2007 BS EN 14682:2007. Safety of children's clothing. Cords and drawstrings on children's clothing. Specifications
BS EN 50411-2-3:2007 BS EN 50411-2-3:2007. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed inline fibre splice closures Type 1, for category S & A
BS EN 50378-3-1:2007 BS EN 50378-3-1:2007. Passive components to be used in optical fibre communication systems. Product specifications. Type 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
BS EN 50377-10-1:2007 BS EN 50377-10-1:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
BS EN 50377-8-9:2007 BS EN 50377-8-9:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
06/30156243 DC 06/30156243 DC. BS EN 197-1 AMD 2. Cement. Part 1. Composition, specifications and conformity criteria for common cements
BS EN 50464-2-2:2007 BS EN 50464-2-2:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1
BS EN 50464-2-3:2007 BS EN 50464-2-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1
BS EN 50464-4:2007 BS EN 50464-4:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Requirements and tests concerning pressurised corrugated tanks
BS EN 50464-3:2007 BS EN 50464-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating of a transformer loaded with non-sinusoidal currents
BS EN 50464-2-1:2007 BS EN 50464-2-1:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high-voltage and/or low-voltage side. General requirements
06/30156305 DC 06/30156305 DC. BS EN 14079-1. Non-active medical devices. Properties for compresses and wound packing products for medical use. Part 1. Test methods and requirements for absorbent cotton gauze and absorbent cotton and viscose gauzes used in the manufacturing of compresses and wound packing products
KIT 194 KIT 194. BS ISO/IEC 18028 IT network security Kit
ISO/TS22595-1 : 2006 EDTN1 ISO/TS22595-1 : 2006 EDTN1. ISO/TS 22595-1 Dentistry. Plant area equipment. Part 1: Suction systems
06/30156317 DC 06/30156317 DC. BS EN 71-1 AMD 2. Safety of toys. Part 1. Mechanical and physical properties
BS 8495:2007 BS 8495:2007. Code of practice for digital CCTV recording systems for the purpose of image export to be used as evidence
BS ISO 8018:2007 BS ISO 8018:2007. Tools for moulding. Guide bushes, headed, and locating guide bushes, headed
BS ISO 9449:2007 BS ISO 9449:2007. Tools for moulding. Centring sleeves
BS ISO 11900-1:2007 BS ISO 11900-1:2007. Tools for pressing. Ball-lock punch retainers. Types A and B, rectangular and square for light duty
BS ISO 1795:2007 BS ISO 1795:2007. Rubber, raw natural and raw synthetic. Sampling and further preparative procedures


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment