2009/09/07

Cheapest & Latest BSI Standard (PDF) (1)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN ISO 10993-5:2009 BS EN ISO 10993-5:2009. Biological evaluation of medical devices. Tests for in vitro cytotoxicity
BS EN ISO 15609-4:2009 BS EN ISO 15609-4:2009. Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser beam welding
BS EN 913:2008 BS EN 913:2008. Gymnastic equipment. General safety requirements and test methods
BS EN 10225:2009 BS EN 10225:2009. Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 10028-6:2009 BS EN 10028-6:2009. Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
BS EN 62271-100:2009 BS EN 62271-100:2009. High-voltage switchgear and controlgear. Alternating current circuit-breakers
PD IEC/TR 61912-2:2009 PD IEC/TR 61912-2:2009. Low-voltage switchgear and controlgear. Over-current protective devices. Selectivity under over-current conditions
BS EN ISO 11806:2008 BS EN ISO 11806:2008. Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety
BS EN 13045:2009 BS EN 13045:2009. Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances
BS EN 50174-1:2009 BS EN 50174-1:2009. Information technology. Cabling installation. Installation specification and quality assurance
BS EN 4632-001:2008 BS EN 4632-001:2008. Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. General requirements
BS EN ISO 18778:2009 BS EN ISO 18778:2009. Respiratory equipment. Infant monitors. Particular requirements
DD IEC/PAS 62596:2009 DD IEC/PAS 62596:2009. Electrotechnical products. Determination of restricted substances. Sampling procedure. Guidelines
BS ISO 3937-3:2008 BS ISO 3937-3:2008. Cutter arbors with tenon drive. Dimensions of hollow taper interface with flange contact surface
BS EN 62430:2009 BS EN 62430:2009. Environmentally conscious design for electrical and electronic products
BS EN 61850-7-420:2009 BS EN 61850-7-420:2009. Communication networks and systems for power utility automation. Basic communication structure. Distributed energy resources logical nodes
BS ISO 22128:2008 BS ISO 22128:2008. Terminology products and services. Overview and guidance
BS EN ISO 21647:2009 BS EN ISO 21647:2009. Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
BS EN 60598-2-14:2009 BS EN 60598-2-14:2009. Luminaires. Particular requirements. Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment
BS EN ISO 7376:2009 BS EN ISO 7376:2009. Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation
BS EN 61290-10-1:2009 BS EN 61290-10-1:2009. Optical amplifiers. Test methods. Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
BS EN ISO 1628-1:2009 BS EN ISO 1628-1:2009. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
BS EN 12847:2009 BS EN 12847:2009. Bitumen and bituminous binders. Determination of setting tendency of bituminous emulsions
BS IEC 60747-14-3:2009 BS IEC 60747-14-3:2009. Semiconductor devices. Semiconductor sensors. Pressure sensors
BS EN ISO 10993-12:2009 BS EN ISO 10993-12:2009. Biological evaluation of medical devices. Sample preparation and reference materials
BS EN 10028-5:2009 BS EN 10028-5:2009. Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
BS EN 60793-2-30:2009 BS EN 60793-2-30:2009. Optical fibres. Product specifications. Sectional specification for category A3 multimode fibres
BS EN ISO 15877-5:2009 BS EN ISO 15877-5:2009. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Fitness for purpose of the system
BS EN ISO 8359:2009 BS EN ISO 8359:2009. Oxygen concentrators for medical use. Safety requirements
BS EN 10028-4:2009 BS EN 10028-4:2009. Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
BS EN ISO 10651-2:2009 BS EN ISO 10651-2:2009. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Home care ventilators for ventilator-dependent patients
BS 5385-1:2009 BS 5385-1:2009. Wall and floor tiling. Design and installation of ceramic, natural stone and mosaic wall tiling in normal internal conditions. Code of practice
BS ISO 28580:2009 BS ISO 28580:2009. Passenger car, truck and bus tyres. Methods of measuring rolling resistance. Single point test and correlation of measurement results
BS EN ISO 10993-15:2009 BS EN ISO 10993-15:2009. Biological evaluation of medical devices. Identification and quantification of degradation products from metals and alloys
BS EN 60793-2-20:2009 BS EN 60793-2-20:2009. Optical fibres. Product specifications. Sectional specification for category A2 multimode fibres
BS EN 50468:2009 BS EN 50468:2009. Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports
BS EN 15767-2:2009 BS EN 15767-2:2009. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Water nozzles
BS ISO 25760:2009 BS ISO 25760:2009. Gas cylinders. Operational procedures for the safe removal of valves from gas cylinders
BS EN 50131-8:2009 BS EN 50131-8:2009. Alarm systems. Intrusion and hold-up systems. Security fog device/systems
BS EN 61770:2009 BS EN 61770:2009. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 10028-3:2009 BS EN 10028-3:2009. Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
BS EN 13075-2:2009/BS 2000-497:2009 BS EN 13075-2:2009/BS 2000-497:2009. Bitumen and bituminous binders. Determination of breaking behaviour. Determination of fines mixing time of cationic bitumen emulsions
DD IEC/PAS 62545:2008 DD IEC/PAS 62545:2008. Environmental information on electrical and electronic equipment (EIEEE)
BS EN 50411-2-5:2009 BS EN 50411-2-5:2009. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed closures for air blown fibre microduct, type 1, for category S & A
BS EN ISO 13678:2009 BS EN ISO 13678:2009. Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
BS EN 60670-23:2008 BS EN 60670-23:2008. Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Particular requirements for floor boxes and enclosures
BS EN 60749-20-1:2009 BS EN 60749-20-1:2009. Semiconductor devices. Mechanical and climatic test methods. Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat
BS EN 10028-2:2009 BS EN 10028-2:2009. Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
BS EN ISO 18777:2009 BS EN ISO 18777:2009. Transportable liquid oxygen systems for medical use. Particular requirements
PD ISO/TR 24156:2008 PD ISO/TR 24156:2008. Guidelines for using UML notation in terminology work
BS EN ISO 660:2009 BS EN ISO 660:2009. Animal and vegetable fats and oils. Determination of acid value and acidity
BS EN 60068-2-27:2009 BS EN 60068-2-27:2009. Environmental testing. Tests. Test Ea and guidance: Shock
BS EN 62271-110:2009 BS EN 62271-110:2009. High-voltage switchgear and controlgear. Inductive load switching
BS EN ISO 5764:2009 BS EN ISO 5764:2009. Milk. Determination of freezing point. Thermistor cryoscope method (Reference method)
BS ISO 18117:2009 BS ISO 18117:2009. Surface chemical analysis. Handling of specimens prior to analysis
BS EN 60424-5:2009 BS EN 60424-5:2009. Ferrite cores. Guide on the limits of surface irregularities. Planar-cores
BS ISO 4691:2009 BS ISO 4691:2009. Iron ores. Determination of titanium. Diantipyrylmethane spectrophotometric method
BS ISO 15767:2009 BS ISO 15767:2009. Workplace atmospheres. Controlling and characterizing uncertainty in weighing collected aerosols
BS EN ISO 23936-1:2009 BS EN ISO 23936-1:2009. Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production. Thermoplastics
BS IEC 62341-1-1:2009 BS IEC 62341-1-1:2009. Organic light emitting diode (OLED) displays. Generic specifications
BS ISO 9682-1:2009 BS ISO 9682-1:2009. Iron ores. Determination of manganese content. Flame atomic absorption spectrometric method
BS EN 1504-9:2008 BS EN 1504-9:2008. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. General principles for use of products and systems
BS EN ISO 15877-2:2009 BS EN ISO 15877-2:2009. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Pipes
BS EN 4537-2:2009 BS EN 4537-2:2009. Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load. Dimensions and loads. Inch series
BS EN ISO 5366-1:2009 BS EN ISO 5366-1:2009. Anaesthetic and respiratory equipment. Tracheostomy tubes. Tubes and connectors for use in adults
DD IEC/TS 62564-1:2009 DD IEC/TS 62564-1:2009. Aerospace qualified electronic component (AQEC). Microcircuits
BS EN 50411-2-8:2009 BS EN 50411-2-8:2009. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Microduct connectors, for air blown optical fibres, Type 1
BS EN 61073-1:2009 BS EN 61073-1:2009. Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables. Generic specification
BS ISO 26430-1:2008 BS ISO 26430-1:2008. Digital cinema (D-cinema) operations. Key delivery message
DD IEC/PAS 61169-41:2009 DD IEC/PAS 61169-41:2009. Radio-frequency connectors. Sectional specification for CQA series quick lock R.F. coaxial connectors
BS 7977-1:2009 BS 7977-1:2009. Specification for safety and rational use of energy of domestic gas appliances. Radiant/convectors
BS ISO 1928:2009 BS ISO 1928:2009. Solid mineral fuels. Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
BS EN 3155-075:2009 BS EN 3155-075:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, quadrax, size 08, female, type E, crimp, class R. Product standard
BS ISO 25762:2009 BS ISO 25762:2009. Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
BS EN 12808-4:2009 BS EN 12808-4:2009. Grouts for tiles. Determination of shrinkage
BS EN 62137-1-5:2009 BS EN 62137-1-5:2009. Surface mounting technology. Environmental and endurance test methods for surface mount solder joints. Mechanical shear fatigue test
PD ISO/TR 12773-2:2009 PD ISO/TR 12773-2:2009. Business requirements for health summary records. Environmental scan
BS EN 55016-2-1:2009 BS EN 55016-2-1:2009. Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements
BS EN 50174-2:2009 BS EN 50174-2:2009. Information technology. Cabling installation. Installation planning and practices inside buildings
BS EN ISO 9919:2009 BS EN ISO 9919:2009. Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
BS ISO 22266-1:2009 BS ISO 22266-1:2009. Mechanical vibration. Torsional vibration of rotating machinery. Land-based steam and gas turbine generator sets in excess of 50 MW
BS EN 140401:2009 BS EN 140401:2009. Blank Detail Specification. Fixed low power film surface mount (SMD) resistors
BS EN ISO 1461:2009 BS EN ISO 1461:2009. Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
BS EN 61300-3-43:2009 BS EN 61300-3-43:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Mode transfer function measurement for fibre optic sources
BS EN 62496-1:2009 BS EN 62496-1:2009. Optical circuit boards. General
BS EN 62097:2009 BS EN 62097:2009. Hydraulic machines, radial and axial. Performance conversion method from model to prototype
PD CLC/TR 50481:2009 PD CLC/TR 50481:2009. Recommendations on filters for shielded enclosures
BS ISO 3937-2:2008 BS ISO 3937-2:2008. Cutter arbors with tenon drive. Dimensions of 7/24 taper
PD ISO/TR 12773-1:2009 PD ISO/TR 12773-1:2009. Business requirements for health summary records. Requirements
PD IEC/TR 62296:2009 PD IEC/TR 62296:2009. Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements
BS ISO 3937-1:2008 BS ISO 3937-1:2008. Cutter arbors with tenon drive. Dimensions of Morse taper
BS EN 15767-1:2009 BS EN 15767-1:2009. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. General requirements for portable monitor assemblies
BS EN ISO 8185:2009 BS EN ISO 8185:2009. Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
BS EN ISO 15004-1:2009 BS EN ISO 15004-1:2009. Ophthalmic instruments. Fundamental requirements and test methods. General requirements applicable to all ophthalmic instruments
BS EN 61753-031-3:2009 BS EN 61753-031-3:2009. Fibre optic interconnecting devices and passive components performance standard. Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category U. Uncontrolled environment
BS ISO 9683-2:2009 BS ISO 9683-2:2009. Iron ores. Determination of vanadium content. Flame atomic absorption spectrometric methods
BS EN ISO 14723:2009 BS EN ISO 14723:2009. Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
BS EN 915:2008 BS EN 915:2008. Gymnastic equipment. Asymmetric bars. Requirements and test methods including safety
PD CISPR/TR 16-2-5:2008 PD CISPR/TR 16-2-5:2008. Specification for radio disturbance and immunity measuring apparatus and methods. In situ measurements of disturbing emissions produced by physically large equipment
BS ISO 5408:2009 BS ISO 5408:2009. Screw threads. Vocabulary
ISO16630 : 2009 EDTN1 ISO16630 : 2009 EDTN1. ISO 16630 Metallic materials - Sheet and strip - Hole expanding test
BS EN 61646:2008 BS EN 61646:2008. Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 914:2008 BS EN 914:2008. Gymnastic equipment. Parallel bars and combination asymmetric/parallel bars. Requirements and test methods including safety
09/30163217 DC 09/30163217 DC. BS EN 10283. Corrosion resistant steel castings
PD CEN ISO/TR 20172:2009 PD CEN ISO/TR 20172:2009. Welding. Grouping systems for materials. European materials
ISO1407 : 2009 EDTN3 ISO1407 : 2009 EDTN3. ISO 1407 Rubber Determination of solvent extract
09/30169508 DC 09/30169508 DC. BS ISO/IEC 13888-2. Information technology. Security techniques. Non-repudiation. Part 2. Mechanisms using symmetric techniques
09/30169518 DC 09/30169518 DC. BS ISO/IEC 10118-2. Information technology. Security techniques. Hash-functions. Part 2. Hash-functions using an n-bit block cipher
BS EN 16001:2009 BS EN 16001:2009. Energy management systems. Requirements with guidance for use
09/30173644 DC 09/30173644 DC. BS EN ISO 80369-1. Small bore connectors for liquids and gases in healthcare applications. Part 1. General requirements
09/30176359 DC 09/30176359 DC. BS ISO 21360-2. Vacuum technology. Standard methods for measuring. vacuum-pump performance. Part 2. Positive displacement vacuum pumps
09/30176416 DC 09/30176416 DC. BS EN 61970-502-8. Energy Management System Application Program Interface (EMS-API). Part 502-8. Web Services Profile for 61970-4 Abstract Services
09/30178078 DC 09/30178078 DC. BS ISO 7116. Mopeds. Measurement method for maximum speed
09/30178938 DC 09/30178938 DC. BS ISO 10244. Document management. Business process baselining and analysis
ISO/IEC12139-1 : 2009 EDTN1 ISO/IEC12139-1 : 2009 EDTN1. ISO/IEC 12139-1 Information technology - Telecommunications and information exchange between systems - Powerline communication (PLC) - High speed PLC medium access control (MAC) and physical layer (PHY) - . Part 1: General requirements
09/30183531 DC 09/30183531 DC. BS EN 50518-3. Monitoring and alarm receiving centre. Part 3. Procedures and requirements for operation
09/30184127 DC 09/30184127 DC. BS EN 61709. Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion
09/30184446 DC 09/30184446 DC. BS EN ISO 24503. Ergonomics. Accessible design. Using tactile dots and bars on consumer products
09/30185270 DC 09/30185270 DC. BS EN ISO 24502. Ergonomics. Accessible design. Specification of age-related relative luminance in visual signs and displays
09/30185848 DC 09/30185848 DC. BS EN 13126-19. Building hardware. Requirements and test methods for windows and door height windows. Part 19. Sliding Closing Devices
09/30187535 DC 09/30187535 DC. BS EN 13000. Cranes. Mobile cranes
09/30187760 DC 09/30187760 DC. BS EN 1562. Founding. Malleable cast irons
09/30192714 DC 09/30192714 DC. BS EN 795. Personal fall protection equipment. Anchor devices
09/30193854 DC 09/30193854 DC. BS EN ISO 7711-2. Dentistry. Rotary diamond instruments. Part 2. Discs
09/30194335 DC 09/30194335 DC. BS EN 61800-3 AMD1. Adjustable speed electrical power drive systems. Part 3. EMC requirements and specific test methods
ISO23570-3 : 2009 EDTN2 ISO23570-3 : 2009 EDTN2. ISO 23570-3 Industrial automation systems and integration - Distributed installation in industrial applications - . Part 3: Power distribution bus
09/30195732 DC 09/30195732 DC. BS ISO 10804. Restrained joint systems for ductile iron pipelines. Design rules and type testing
09/30195818 DC 09/30195818 DC. BS ISO 3613. Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods
09/30196113 DC 09/30196113 DC. BS ISO 9717. Metallic and other inorganic coatings. Phosphate conversion coating of metals
09/30196396 DC 09/30196396 DC. BS ISO 13822. Bases for design of structures. Assessment of existing structures
09/30196505 DC 09/30196505 DC. BS EN ISO 10077-2. Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Part 2. Numerical method for frames
09/30197779 DC 09/30197779 DC. BS ISO 7240-25. Fire detection and fire alarm systems. Part 25. Components using radio transmission paths
09/30200834 DC 09/30200834 DC. BS EN 1559-1. Founding. Technical conditions of delivery. Part 1. General
09/30200837 DC 09/30200837 DC. BS EN 1560. Founding. Designation system for cast iron. Material symbols and material numbers
09/30200840 DC 09/30200840 DC. BS EN 1564. Founding. Ausferritic spheroidal graphite cast iron
09/30202737 DC 09/30202737 DC. BS EN 15964. Breath alcohol test devices other than single use devices. Requirements and test methods
09/30203040 DC 09/30203040 DC. BS EN 15408. Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
09/30203049 DC 09/30203049 DC. BS EN 10351. Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
09/30203307 DC 09/30203307 DC. BS EN 14636-2. Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Part 2. Manholes and inspection chambers
09/30203421 DC 09/30203421 DC. BS 5950-3.1 AMD1. Structural use of steelwork in building. Part 3. Design in composite construction. Code of practice for design of simple and continuous composite beams
09/30203525 DC 09/30203525 DC. BS ISO 2236. Assembly tools for screws and nuts. Forged and tubular socket wrenches. Maximum outside head dimensions
09/30205816 DC 09/30205816 DC. BS ISO 19334. Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis
09/30206303 DC 09/30206303 DC. BS EN 60335-2-40 AMD1. Household and similar electrical appliances. Safety. Part 2-40. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
09/30206330 DC 09/30206330 DC. BS EN 61803 AMD1. Determination of power losses in high-voltage direct current (HVDC) converter stations
09/30206527 DC 09/30206527 DC. BS EN 60079-0. Explosive atmospheres. Part 0. Equipment. General requirements
09/30206605 DC 09/30206605 DC. BS EN 60695-2-10. Fire hazard testing. Part 2-10. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
09/30206609 DC 09/30206609 DC. BS EN 60695-11-10. Fire hazard testing. Part 11-10. Test flames. 50 W horizontal and vertical flame test methods
09/30206613 DC 09/30206613 DC. BS EN 60695-11-20. Fire hazard testing. Part 11-20. Test flames. 500 W flame test methods
09/30206653 DC 09/30206653 DC. BS EN 61591 AMD2. Household range hoods. Methods for measuring performance
09/30206804 DC 09/30206804 DC. BS EN 60335-1 AMD1. Household and similar electrical appliances. Safety. Part 1. General requirements
图片链接
图片链接
图片链接
09/30206286 DC 09/30206286 DC. BS EN 62561-6. Requirements for Lightning Protection System Components (LPSC). Part 6. Requirements for lightning strike counters
09/30203037 DC 09/30203037 DC. BS EN 15407. Solid recovered fuels. Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
09/30202720 DC 09/30202720 DC. BS EN 15962. Fertilizers. Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
BS EN ISO 10993-11:2009 BS EN ISO 10993-11:2009. Biological evaluation of medical devices. Tests for systemic toxicity
BS EN ISO 10993-13:2009 BS EN ISO 10993-13:2009. Biological evaluation of medical devices. Identification and quantification of degradation products from polymeric medical devices
BS EN ISO 10993-18:2009 BS EN ISO 10993-18:2009. Biological evaluation of medical devices. Chemical characterization of materials
BS EN ISO 10993-6:2009 BS EN ISO 10993-6:2009. Biological evaluation of medical devices. Tests for local effects after implantation
BS EN ISO 10993-9:2009 BS EN ISO 10993-9:2009. Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
BS EN ISO 10651-4:2009 BS EN ISO 10651-4:2009. Lung ventilators . Particular requirements for operator-powered resuscitators
BS 4311-2:2009 BS 4311-2:2009. Gauge blocks manufactured to imperial specification. Accessories
BS EN 3155-032:2009 BS EN 3155-032:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R. Product standard
DD ISO/TS 13434:2008 DD ISO/TS 13434:2008. Geosynthetics. Guidelines for the assessment of durability
BS ISO 13779-1:2008 BS ISO 13779-1:2008. Implants for surgery. Hydroxyapatite. Ceramic hydroxyapatite
BS EN ISO 23811:2009 BS EN ISO 23811:2009. Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
BS EN 14133:2009 BS EN 14133:2009. Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with immunoaffinity column clean-up
BS 8522:2009 BS 8522:2009. Furniture removal activities. Commercial moving services
BS EN 13752:2009 BS EN 13752:2009. Products used for treatment of water intended for human consumption. Manganese dioxide
BS ISO 7770:2009 BS ISO 7770:2009. Textiles. Test method for assessing the smoothness appearance of seams in fabrics after cleansing
DD CEN/TS 1992-4-4:2009 DD CEN/TS 1992-4-4:2009. Design of fastenings for use in concrete. Post-installed fasteners. Mechanical systems
DD CEN/TS 1992-4-3:2009 DD CEN/TS 1992-4-3:2009. Design of fastenings for use in concrete. Anchor channels
BS EN 934-2:2009 BS EN 934-2:2009. Admixtures for concrete, mortar and grout. Concrete admixtures. Definitions, requirements, conformity, marking and labelling
BS EN 15559:2009 BS EN 15559:2009. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd
DD CEN/TS 14816:2008 DD CEN/TS 14816:2008. Fixed firefighting systems. Water spray systems. Design and installation
BS EN ISO 13849-1:2008 BS EN ISO 13849-1:2008. Safety of machinery. Safety-related parts of control systems. General principles for design
BS ISO 3862:2009 BS ISO 3862:2009. Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification
BS ISO 1436:2009 BS ISO 1436:2009. Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification
BS EN 4604-001:2009 BS EN 4604-001:2009. Aerospace series. Cable, electrical, for signal transmission. Technical specification
BS ISO 23584-1:2009 BS ISO 23584-1:2009. Optics and photonics. Specification of reference dictionary. General overview on organization and structure
DD CEN/TS 1852-2:2009 DD CEN/TS 1852-2:2009. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity
BS EN 13230-3:2009 BS EN 13230-3:2009. Railway applications. Track. Concrete sleepers and bearers. Twin-block reinforced sleepers
DD CEN/TS 15703-1:2009 DD CEN/TS 15703-1:2009. Copper and copper alloys. Determination of manganese content. Spectrophotometric method
BS EN 61249-2-38:2009 BS EN 61249-2-38:2009. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 525:2009 BS EN 525:2009. Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
BS EN 15652:2009 BS EN 15652:2009. Foodstuffs. Determination of niacin by HPLC
BS EN ISO 11643:2009 BS EN ISO 11643:2009. Leather. Tests for colour fastness. Colour fastness of small samples to solvents
BS EN 13757-5:2008 BS EN 13757-5:2008. Communication systems for meters and remote reading of meters. Wireless relaying
BS EN 12671:2009 BS EN 12671:2009. Chemicals used for treatment of water intended for human consumption. Chlorine dioxide generated in situ
PD ISO/TR 18124:2006 PD ISO/TR 18124:2006. Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
BS EN ISO 8067:2008 BS EN ISO 8067:2008. Flexible cellular polymeric materials. Determination of tear strength
BS ISO 16000-14:2009 BS ISO 16000-14:2009. Indoor air. Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
BS EN 4636:2009 BS EN 4636:2009. Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 15437-1:2009 BS EN 15437-1:2009. Railway applications. Axlebox condition monitoring. Interface and design requirements. Track side equipment and rolling stock axlebox
BS ISO 12637-3:2009 BS ISO 12637-3:2009. Graphic technology. Vocabulary. Printing terms
BS ISO 18672-1:2009 BS ISO 18672-1:2009. Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Pipes and fittings with flexible joints
BS ISO 8178-5:2008 BS ISO 8178-5:2008. Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS EN 15059:2009 BS EN 15059:2009. Snow grooming equipment. Safety requirements
PD ISO/TR 19972-1:2009 PD ISO/TR 19972-1:2009. Hydraulic fluid power. Methods to assess the reliability of hydraulic components . General procedures and calculation method
BS 2482:2009 BS 2482:2009. Specification for timber scaffold boards
BS EN 15170:2008 BS EN 15170:2008. Characterization of sludges. Determination of calorific value
BS EN 9131:2009 BS EN 9131:2009. Aerospace series. Quality management systems. Nonconformance documentation
BS EN 14316-2:2007 BS EN 14316-2:2007. Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products. Specification for the installed products
BS EN 81-43:2009 BS EN 81-43:2009. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Lifts for cranes
BS ISO 13473-5:2009 BS ISO 13473-5:2009. Characteristics of pavement texture by use of surface profiles. Determination of megatexture
BS EN 15169:2007 BS EN 15169:2007. Characterization of waste. Determination of loss on ignition in waste, sludge and sediments
BS ISO 21628:2008 BS ISO 21628:2008. Gardening machinery. Powered material-collecting systems. Safety
BS EN 671-3:2009 BS EN 671-3:2009. Fixed firefighting systems. Hose systems. Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
BS EN ISO 24415-1:2009 BS EN ISO 24415-1:2009. Tips for assistive products for walking. Requirements and test methods. Friction of tips
BS ISO 11379:2009 BS ISO 11379:2009. Textile floor coverings. Laboratory cleaning procedure using spray extraction
BS ISO 23297:2008 BS ISO 23297:2008. Thermoplastics hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification
DD CLC/TS 50131-2-7-1:2009 DD CLC/TS 50131-2-7-1:2009. Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (acoustic)
BS EN ISO 17226-1:2008 BS EN ISO 17226-1:2008. Leather. Chemical determination of formaldehyde content. Method using high performance liquid chromatography
DD IEC/TS 60815-3:2008 DD IEC/TS 60815-3:2008. Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Polymer insulators for a.c. systems
BS EN 14531-6:2009 BS EN 14531-6:2009. Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking. Step by step calculations for train sets or single vehicles
BS EN 15607:2009 BS EN 15607:2009. Foodstuffs. Determination of d-biotin by HPLC
DD CEN/TS 15616:2009 DD CEN/TS 15616:2009. Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS)
BS ISO 26021-4:2009 BS ISO 26021-4:2009. Road vehicles. End-of-life activation of on-board pyrotechnic devices. Additional communication line with bidirectional communication
BS EN ISO 11644:2009 BS EN ISO 11644:2009. Leather. Test for adhesion of finish
BS EN ISO 22959:2009 BS EN ISO 22959:2009. Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection
BS EN 60034-30:2009 BS EN 60034-30:2009. Rotating electrical machines. Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
PD IEC/TR 60943:2009 PD IEC/TR 60943:2009. Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
BS EN 12807:2009 BS EN 12807:2009. LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction
BS EN 15663:2009 BS EN 15663:2009. Railway applications. Definition of vehicle reference masses
BS EN 60851-3:2009 BS EN 60851-3:2009. Winding wires. Test methods. Mechanical properties
BS EN 902:2009 BS EN 902:2009. Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide
BS EN 938:2009 BS EN 938:2009. Chemicals used for treatment of water intended for human consumption. Sodium chlorite
BS EN 14166:2009 BS EN 14166:2009. Foodstuffs. Determination of vitamin B6 by microbiological assay
BS EN 61249-2-36:2009 BS EN 61249-2-36:2009. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 13230-1:2009 BS EN 13230-1:2009. Railway applications. Track. Concrete sleepers and bearers. General requirements
BS EN 1097-4:2008 BS EN 1097-4:2008. Tests for mechanical and physical properties of aggregates. Determination of the voids of dry compacted filler
BS EN 1097-5:2008 BS EN 1097-5:2008. Tests for mechanical and physical properties of aggregates. Determination of the water content by drying in a ventilated oven
BS EN 13230-4:2009 BS EN 13230-4:2009. Railway applications. Track. Concrete sleepers and bearers. Prestressed bearers for switches and crossings
BS EN 13230-5:2009 BS EN 13230-5:2009. Railway applications. Track. Concrete sleepers and bearers. Special elements
BS EN 15766:2009 BS EN 15766:2009. Packaging. Flexible aluminium tubes. Test methods to determine the polymerization of the internal coating with acetone
BS ISO 4079:2009 BS ISO 4079:2009. Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification
DD ISO/IEC PAS 11889-4:2009 DD ISO/IEC PAS 11889-4:2009. Information technology. Trusted Platform Module. Commands
BS EN 15604:2009 BS EN 15604:2009. Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
BS EN 4626-202:2009 BS EN 4626-202:2009. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contacts. Optical contact assembly for 900 μm buffered fibre receptacle. Product standard
BS ISO 6814:2009 BS ISO 6814:2009. Machinery for forestry. Mobile and self-propelled machinery. Terms, definitions and classification
DD CEN/TS 1992-4-1:2009 DD CEN/TS 1992-4-1:2009. Design of fastenings for use in concrete. General
BS EN 13753:2009 BS EN 13753:2009. Products used for treatment of water intended for human consumption. Granular activated alumina
BS EN 12903:2009 BS EN 12903:2009. Products used for the treatment of water intended for human consumption. Powdered activated carbon
BS ISO 8140:2009 BS ISO 8140:2009. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises
BS EN ISO 8586-2:2008 BS EN ISO 8586-2:2008. Sensory analysis. General guidance for the selection, training and monitoring of assessors. Expert sensory assessors
BS ISO 10242-3:2008 BS ISO 10242-3:2008. Tools for pressing. Punch holder shanks. Type D
BS EN 3155-033:2009 BS EN 3155-033:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical,coaxial, 50 ohms, size 5, female, type D, crimp, class R. Product Standard
BS EN ISO 10651-6:2009 BS EN ISO 10651-6:2009. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Home-care ventilatory support devices
BS EN ISO 8536-3:2009 BS EN ISO 8536-3:2009. Infusion equipment for medical use. Aluminium caps for infusion bottles
BS EN ISO 14159:2008 BS EN ISO 14159:2008. Safety of machinery. Hygiene requirements for the design of machinery
09/30206172 DC 09/30206172 DC. BS EN 60695-7-3. Fire hazard testing. Part 7-3. Toxicity of fire effluent. Use and interpretation of test results
09/30206176 DC 09/30206176 DC. BS EN 62137-3. Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints
09/30206282 DC 09/30206282 DC. BS EN 62561-5. Requirements for Lightning Protection System Components (LPSC). Part 5. Requirements for earth electrode inspection housings and earth electrode seals
BS ISO/IEC 7811-2:2001 BS ISO/IEC 7811-2:2001. Identification cards. Recording technique. Magnetic stripe. Low coercivity
BS EN 4199-005:2009 BS EN 4199-005:2009. Aerospace series. Bonding straps for aircraft. Flat braid conductors copper, tin plated -65°C up to 150°C and copper, nickel plated, -65°C up to 260°C. Product standard
BS EN ISO 10993-17:2009 BS EN ISO 10993-17:2009. Biological evaluation of medical devices. Establishment of allowable limits for leachable substances
BS EN ISO 10993-3:2009 BS EN ISO 10993-3:2009. Biological evaluation of medical devices. Tests for genotoxicity, carcinogenicity and reproductive toxicity
BS EN ISO 8835-4:2009 BS EN ISO 8835-4:2009. Inhalational anaesthesia systems. Anaesthetic vapour delivery devices
BS IEC 61588:2008 BS IEC 61588:2008. Precision clock synchronization protocol for networked measurement and control systems
BS EN 14132:2009 BS EN 14132:2009. Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up
BS EN 14121:2009 BS EN 14121:2009. Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications
09/30186350 DC 09/30186350 DC. BS EN 60825-2 AMD2. Safety of optical fibre communication systems (OFCS)
DD CEN/TS 15880:2009 DD CEN/TS 15880:2009. Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre pushout method
BS ISO 10242-2:2008 BS ISO 10242-2:2008. Tools for pressing. Punch holder shanks. Type C
BS EN 12915-2:2009 BS EN 12915-2:2009. Products used for the treatment of water intended for human consumption. Granular activated carbon. Reactivated granular activated carbon
BS EN 12915-1:2009 BS EN 12915-1:2009. Products used for the treatment of water intended for human consumption. Granular activated carbon. Virgin granular activated carbon
BS EN 12907:2009 BS EN 12907:2009. Products used for treatment of water intended for human consumption. Pyrolyzed coal material
BS EN 13754:2009 BS EN 13754:2009. Products used for treatment of water intended for human consumption. Bentonite
DD CEN/TS 1992-4-5:2009 DD CEN/TS 1992-4-5:2009. Design of fastenings for use in concrete. Post-installed fasteners. Chemical systems
DD CEN/TS 1992-4-2:2009 DD CEN/TS 1992-4-2:2009. Design of fastenings for use in concrete. Headed fasteners
BS EN 934-4:2009 BS EN 934-4:2009. Admixtures for concrete, mortar and grout. Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling
BS EN 15560:2009 BS EN 15560:2009. Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free
DD ISO/IEC PAS 11889-2:2009 DD ISO/IEC PAS 11889-2:2009. Information technology. Trusted Platform Module. Design principles
BS ISO 17735:2009 BS ISO 17735:2009. Workplace atmospheres. Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography
BS EN 13279-1:2008 BS EN 13279-1:2008. Gypsum binders and gypsum plasters. Definitions and requirements
BS 8513:2009 BS 8513:2009. Personal fall protection equipment. Twin-legged energy-absorbing lanyards. Specification
BS EN 203-3:2009 BS EN 203-3:2009. Gas heated catering equipment. Materials and parts in contact with food and other sanitary aspects
BS EN 15713:2009 BS EN 15713:2009. Secure destruction of confidential material. Code of practice
BS EN 15711:2009 BS EN 15711:2009. Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements
BS EN 12350-2:2009 BS EN 12350-2:2009. Testing fresh concrete. Slump-test
BS EN 581-2:2009 BS EN 581-2:2009. Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for seating
BS EN 3155-064:2009 BS EN 3155-064:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms size 1, female, type D, solder, class R. Product standard
BS EN 939:2009 BS EN 939:2009. Chemicals used for treatment of water intended for human consumption. Hydrochloric acid
PD ISO/TR 27957:2008 PD ISO/TR 27957:2008. Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations
BS ISO 14524:2009 BS ISO 14524:2009. Photography. Electronic still-picture Cameras. Methods for measuring optoelectronic conversion functions (OECFs)
BS ISO 26021-3:2009 BS ISO 26021-3:2009. Road vehicles. End-of-life activation of on-board pyrotechnic devices. Tool requirements
BS EN 15610:2009 BS EN 15610:2009. Railway applications. Noise emission. Rail roughness measurement related to rolling noise generation
BS EN 15583-1:2009 BS EN 15583-1:2009. Winter maintenance equipment. Snow ploughs. Product description and requirements
DD CLC/TS 50131-2-7-3:2009 DD CLC/TS 50131-2-7-3:2009. Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (active)
BS EN 4614:2009 BS EN 4614:2009. Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
BS EN 4613:2009 BS EN 4613:2009. Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series
BS EN 4535-2:2009 BS EN 4535-2:2009. Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load. Dimensions and loads. Inch series
BS EN 61534-22:2009 BS EN 61534-22:2009. Powertrack systems. Particular requirements for powertrack systems intended for on floor or under floor installation
BS EN 14908-5:2009 BS EN 14908-5:2009. Open data communication in building automation, controls and building management implementation guideline. Control network protocol. Implementation
BS ISO 3082:2009 BS ISO 3082:2009. Iron ores. Sampling and sample preparation procedures
BS ISO/IEC 24761:2009 BS ISO/IEC 24761:2009. Information technology. Security techniques. Authentication context for biometrics
BS EN ISO 19136:2009 BS EN ISO 19136:2009. Geographic information. Geography Markup Language (GML)
BS ISO/IEC 14102:2008 BS ISO/IEC 14102:2008. Information technology. Guideline for the evaluation and selection of CASE tools
BS ISO 20775:2009 BS ISO 20775:2009. Information and documentation. Schema for holdings information
09/30093258 DC 09/30093258 DC. BS 8006-1. Code of practice for strengthened/reinforced soils and other fills
DD IEC/TS 60815-2:2008 DD IEC/TS 60815-2:2008. Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Ceramic and glass insulators for a.c. systems
BS ISO 16877:2008 BS ISO 16877:2008. Short link chains for lifting purposes. Grade TH, fine tolerance for manually operated chain hoists
BS ISO 10505:2009 BS ISO 10505:2009. Photography. Root mean square granularity of photographic films. Method of measurement
BS EN ISO 10319:2008 BS EN ISO 10319:2008. Geosynthetics. Wide-width tensile test
DD IEC/TS 60815-1:2008 DD IEC/TS 60815-1:2008. Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Definitions, information and general principles
BS EN 60422:2006 BS EN 60422:2006. Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
BS EN ISO 11885:2009 BS EN ISO 11885:2009. Water quality. Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
BS ISO 13779-3:2008 BS ISO 13779-3:2008. Implants for surgery. Hydroxyapatite. Chemical analysis and characterization of crystallinity and phase purity
BS EN 14967:2006 BS EN 14967:2006. Flexible sheets for waterproofing. Bitumen damp proof courses. Definitions and characteristics
BS ISO 80000-12:2009 BS ISO 80000-12:2009. Quantities and units. Solid state physics
BS EN ISO 105-B07:2009 BS EN ISO 105-B07:2009. Textiles. Tests for colour fastness. Colour fastness to light of textiles wetted with artificial perspiration
BS ISO 25577:2008 BS ISO 25577:2008. Information and documentation. MarcXchange
BS EN ISO 13968:2008 BS EN ISO 13968:2008. Plastics piping and ducting systems. Thermoplastics pipes. Determination of ring flexibility
BS EN 4534-2:2009 BS EN 4534-2:2009. Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load. Dimensions and loads. Inch series
DD CLC/TS 50131-2-7-2:2009 DD CLC/TS 50131-2-7-2:2009. Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (passive)
BS EN 1474-3:2008 BS EN 1474-3:2008. Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems. Offshore transfer systems
BS EN 13848-3:2009 BS EN 13848-3:2009. Railway applications. Track. Track geometry quality. Measuring systems. Track construction and maintenance machines
BS EN ISO 3950:2009 BS EN ISO 3950:2009. Dentistry. Designation system for teeth and areas of the oral cavity
BS EN 12876:2009 BS EN 12876:2009. Chemicals used for treatment of water intended for human consumption. Oxygen
BS EN 3155-063:2009 BS EN 3155-063:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms size 1, male, type D, solder, class R. Product standard
PD IEC/TR 62517:2009 PD IEC/TR 62517:2009. Magnetizing behaviour of permanent magnets
BS EN 13230-2:2009 BS EN 13230-2:2009. Railway applications. Track. Concrete sleepers and bearers. Prestressed monoblock sleepers
BS EN 1367-4:2008 BS EN 1367-4:2008. Tests for thermal and weathering properties of aggregates. Determination of drying shrinkage
BS ISO 3776-3:2009 BS ISO 3776-3:2009. Tractors and machinery for agriculture. Seat belts. Requirements for assemblies
BS ISO 27447:2009 BS ISO 27447:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials
BS ISO 15900:2009 BS ISO 15900:2009. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS ISO 21501-1:2009 BS ISO 21501-1:2009. Determination of particle size distribution. Single particle light interaction methods. Light scattering aerosol spectrometer
BS EN 13164:2008 BS EN 13164:2008. Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification
BS EN 13897:2004 BS EN 13897:2004. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness after stretching at low temperatures
BS EN 422:2009 BS EN 422:2009. Plastics and rubber machines. Blow moulding machines. Safety requirements
BS ISO 11712:2009 BS ISO 11712:2009. Anaesthetic and respiratory equipment. Supralaryngeal airways and connectors
BS ISO 11664-1:2007 BS ISO 11664-1:2007. Colorimetry. CIE standard colorimetric observers
DD ISO/IEC PAS 11889-3:2009 DD ISO/IEC PAS 11889-3:2009. Information technology. Trusted Platform Module. Structures
BS EN 15561:2009 BS EN 15561:2009. Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates
BS EN 15562:2009 BS EN 15562:2009. Fertilizers. Determination of cyanamide nitrogen
BS ISO 8139:2009 BS ISO 8139:2009. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes
BS EN 590:2009 BS EN 590:2009. Automotive fuels. Diesel. Requirements and test methods
DD CEN/TS 15881:2009 DD CEN/TS 15881:2009. Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
BS EN 13226:2009 BS EN 13226:2009. Wood flooring. Solid parquet elements with grooves and/or tongues
BS ISO 725:2009 BS ISO 725:2009. ISO inch screw threads. Basic dimensions
PD CEN/TR 12401:2009 PD CEN/TR 12401:2009. Dentistry. Guidance on the classification of dental devices and accessories
BS ISO 13779-2:2008 BS ISO 13779-2:2008. Implants for surgery. Hydroxyapatite. Coatings of hydroxyapatite
BS EN ISO 20361:2009 BS EN ISO 20361:2009. Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
BS EN ISO 22867:2008 BS EN ISO 22867:2008. Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
09/30194709 DC 09/30194709 DC. BS 10999. Specification for distress signal units for the Fire and Rescue Service
09/30195191 DC 09/30195191 DC. BS ISO 24101-2. Intelligent transport systems. Communications access for land mobiles (CALM). Application management. Part 2. Conformance test
BS EN ISO 10993-14:2009 BS EN ISO 10993-14:2009. Biological evaluation of medical devices. Identification and quantification of degradation products from ceramics
09/30197687 DC 09/30197687 DC. BS ISO 14921. Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components
PD ISO/TR 10771-2:2008 PD ISO/TR 10771-2:2008. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating method
09/30206144 DC 09/30206144 DC. BS EN 60335-2-76 AMD1. Household and similar electrical appliances. Safety. Part 2-76. Particular requirements for electric fence energizers
09/30206291 DC 09/30206291 DC. BS EN 62549. Articulated systems for cable guiding
09/30206315 DC 09/30206315 DC. BS EN 62639. Fluorescent induction lamps. Performance specification
09/30206120 DC 09/30206120 DC. BS EN 60061-1 AMD44. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps
09/30206094 DC 09/30206094 DC. BS EN 62496-3. Optical circuit boards. Part 3. Performance standards. General and guidance
09/30206090 DC 09/30206090 DC. BS EN 62496-4. Optical circuit boards. Interface standards. Part 4. General and guidance
09/30206024 DC 09/30206024 DC. BS EN 61199. Single-capped fluorescent lamps. Safety specifications
09/30205947 DC 09/30205947 DC. BS EN 62271-206. High-voltage prefabricated switchgear and controlgear assemblies. Part 206. Voltage presence indicating systems
09/30205831 DC 09/30205831 DC. BS ISO/IEC 14496-5 AMD2. Information technology. Coding of audio-visual objects. Part 5. Reference software
09/30205773 DC 09/30205773 DC. PD IEC/TR 62153-4-1. Metallic communication cable test methods. Part 4-1. Electromagnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurements
09/30205730 DC 09/30205730 DC. BS ISO/IEC 25040. Software engineering. Software product Quality Requirements and Evaluation (SQuaRE). Evaluation reference model and guide
09/30205715 DC 09/30205715 DC. BS ISO 15877-5 AMD1. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Part 5. Fitness for purpose of the system
09/30205706 DC 09/30205706 DC. BS ISO 15877-2 AMD1. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Part 2. Pipes
09/30205702 DC 09/30205702 DC. BS EN ISO 15877-1 AMD1. Plastics piping systems for hot and cold water installations. Chlorinated poly (vinyl chloride) (PVC-C). Part 1. General
09/30205350 DC 09/30205350 DC. BS EN 60695-7-2. Fire hazard testing. Part -7-2. Toxicity of fire effluent. Summary and relevance of test methods
09/30204721 DC 09/30204721 DC. BS ISO/IEC 9798-1. Information technology. Security techniques. Entity authentication. Part 1. General
09/30202717 DC 09/30202717 DC. BS EN 12266-2. Industrial valves. Testing of metallic valves. Part 2. Tests, test procedures and acceptance criteria. Supplementary requirements
09/30202714 DC 09/30202714 DC. BS EN 12266-1. Industrial valves. Testing of metallic valves. Part 1. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
09/30202711 DC 09/30202711 DC. BS EN 1267. Industrial valves. Test of flow resistance using water as test fluid
09/30202626 DC 09/30202626 DC. BS EN ISO 12474. Hexagon socket head cap screws with metric fine pitch thread
09/30202538 DC 09/30202538 DC. BS EN 15955-2. Railway applications. Track. Demountable machines and associated equipment. Part 2. General safety requirements
09/30202532 DC 09/30202532 DC. BS EN 15954-2. Railway applications. Track. Trailers and associated equipment. Part 2. General safety requirements
09/30202529 DC 09/30202529 DC. BS EN 15954-1. Railway applications. Track. Trailers and associated equipment. Part 1. Technical requirements for running and working
09/30202519 DC 09/30202519 DC. BS EN 312. Particleboards. Specifications
09/30200381 DC 09/30200381 DC. BS 7928-2. Head and face protection for cricketers. Part 2. Face protectors for cricket wicket-keepers
09/30200047 DC 09/30200047 DC. BS EN 12369-2. Wood-based panels. Characteristic values for structural design. Part 2. Plywood
09/30197604 DC 09/30197604 DC. BS ISO/IEC 15938-7 AMD5. Information technology. Multimedia content description interface. Part 7. Conformance testing
09/30196340 DC 09/30196340 DC. BS ISO 23269-2. Ships and marine technology. Breathing apparatus for ships. Part 2. Breathing apparatus for shipboard firefighters
09/30196279 DC 09/30196279 DC. BS ISO 15375. Medical infusion bottles. Suspension devices for multiple use. Requirements and test methods
09/30195738 DC 09/30195738 DC. BS ISO 23269-3. Ships and marine technology. Breathing apparatus for ships. Part 3. Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC codes
09/30194263 DC 09/30194263 DC. BS EN 61439-6. Low-voltage switchgear and controlgear assemblies. Part 6. Busbar trunking systems (busways)
09/30193520 DC 09/30193520 DC. BS EN 60947-5-3. Low-voltage switchgear and controlgear. Part 5-3. Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
09/30190865 DC 09/30190865 DC. BS ISO 10649-4. Cutter arbors with parallel key and tenon drive. Part 4. Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
09/30190862 DC 09/30190862 DC. BS ISO 10649-3. Cutter arbors with parallel key and tenon drive. Part 3. Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
09/30190859 DC 09/30190859 DC. BS ISO 10649-2. Cutter arbors with parallel key and tenon drive. Part 2. Dimensions and designation of tool holders with hollow taper interface
09/30190856 DC 09/30190856 DC. BS ISO 10649-1. Cutter arbors with parallel key and tenon drive. Part 1. General dimensions
09/30189108 DC 09/30189108 DC. BS EN ISO 2307. Fibre ropes. Determination of certain physical and mechanical properties
09/30189104 DC 09/30189104 DC. BS ISO 9554. Fibre ropes. General specifications
09/30188385 DC 09/30188385 DC. BS EN 15269-2. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Part 2. Fire resistance of hinged and pivoted steel doorsets
09/30184926 DC 09/30184926 DC. BS EN 61439-3. Low-voltage switchgear and controlgear assemblies. Part 3. Distribution boards
09/30182215 DC 09/30182215 DC. BS EN 12001 AMD1. Conveying, spraying and placing machines for concrete and mortar. Safety requirements
09/30182200 DC 09/30182200 DC. BS EN 500-1 AMD1. Mobile road construction machinery. Safety. Part 1. Common requirements
09/30181667 DC 09/30181667 DC. BS EN 13035-6 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 6. Machines for break-out
09/30181664 DC 09/30181664 DC. BS EN 13035-4 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 4. Tilting tables
09/30180865 DC 09/30180865 DC. BS ISO 4209-2. Truck and bus tyres and rims (metric series). Part 2. Rims
09/30180073 DC 09/30180073 DC. BS ISO 13956. Plastics pipes and fittings. Determination of cohesive resistance. Tear test for polyethylene (PE) saddle assemblies
09/30179710 DC 09/30179710 DC. BS EN 13035-5 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 5. Machines and installations for stacking and de-stacking
09/30176666 DC 09/30176666 DC. BS EN 62079. Preparation of instructions for use. Structuring, content and presentation
09/30171670 DC 09/30171670 DC. BS ISO 11479-2. Glass in building. Coated glass. Part 2. Colour of facade
09/30171664 DC 09/30171664 DC. BS ISO 11479-1. Glass in building. Coated glass. Part 1. Physical defects
09/30170408 DC 09/30170408 DC. BS 9295. Guide to the structural design of buried pipelines
09/30153670 DC 09/30153670 DC. BS ISO 14237. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials
09/30151834 DC 09/30151834 DC. BS ISO 24113. Space systems. Space debris mitigation requirements
09/30118876 DC 09/30118876 DC. BS ISO 20785-2. Dosimetry for exposures to cosmic radiation in civilian aircraft. Part 2. Characterization of instrument response
09/30162904 DC 09/30162904 DC. BS EN 61204-3. Low voltage power supplies, D.C. output. Part 3. Product EMC standard
ISO6944-2 : 2009 ED1 ISO6944-2 : 2009 ED1. Fire containment. Elements of building construction. Part 2:Kitchen extract ducts
09/30169892 DC 09/30169892 DC. BS EN 62502. Analysis techniques for dependability. Event tree analysis
ISO13623 : 2009 ED2 ISO13623 : 2009 ED2. Petroleum and natural gas industries. Pipeline transportation systems
09/30174199 DC 09/30174199 DC. BS 8203 AMD1. Code of practice for installation of resilient floor coverings
09/30176675 DC 09/30176675 DC. BS EN ISO 15223-1. Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied. Part 1. General requirements
09/30186157 DC 09/30186157 DC. BS ISO 10677. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
ISO/IEC26925 : 2009 EDTN2 ISO/IEC26925 : 2009 EDTN2. ISO/IEC 26925 Information technology Data interchange on 120 mm and 80 mm optical disk using +RW HS format Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)
ISO/IEC12862 : 2009 EDTN1 ISO/IEC12862 : 2009 EDTN1. ISO/IEC 12862. Information technology. 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
ISO/IEC17344 : 2009 EDTN4 ISO/IEC17344 : 2009 EDTN4. ISO/IEC 17344 Information technology Data interchange on 120 mm and 80 mm optical disk using +R format Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)
ISO/IEC17341 : 2009 EDTN4 ISO/IEC17341 : 2009 EDTN4. ISO/IEC 17341 Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW format. Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
ISO/IEC29642 : 2009 EDTN2 ISO/IEC29642 : 2009 EDTN2. ISO/IEC 29642 Information technology Data interchange on 120 mm and 80 mm optical disk using +RW DL format Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)
09/30189953 DC 09/30189953 DC. BS 8520-1. Equipment used in the controlled removal of asbestos-containing materials. Part 1. Controlled wetting equipment. Specification
09/30189955 DC 09/30189955 DC. BS 8520-2. Equipment used in the controlled removal of asbestos-containing materials. Part 2. Negative pressure units. Specification
09/30189957 DC 09/30189957 DC. BS 8520-3. Equipment used in the controlled removal of asbestos-containing materials. Part 3. Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice
09/30195381 DC 09/30195381 DC. BS EN 60269-6. Low-voltage fuses. Part 6. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
09/30195515 DC 09/30195515 DC. BS ISO/IEC 29199-4. Information technology. JPEG XR image coding system. Part 4. Conformance testing
09/30195517 DC 09/30195517 DC. BS ISO/IEC 29199-5. Information technology. JPEG XR image coding system. Part 5. Reference software
09/30196492 DC 09/30196492 DC. BS EN ISO 25139. Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
09/30197005 DC 09/30197005 DC. BS ISO 10871. Water quality. Determination of the inhibition of dehydrogenase activity of Arthrobacter globiformis. Solid contact test using the redox dye resazurine
09/30197932 DC 09/30197932 DC. BS EN 60512-99-001. Connectors for electronic equipment. Tests and measurements. Part 99-001. Test schedule for mating and un-mating connectors under electrical load. Power over the internet (plus) PoEP, particularly applicable to IEC 60603-7 series connectors
09/30201908 DC 09/30201908 DC. BS EN 15947-1. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 1. Terminology
09/30201912 DC 09/30201912 DC. BS EN 15947-2. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 2. Categories and types of firework
09/30201915 DC 09/30201915 DC. BS EN 15947-3. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 3. Minimum labelling requirements
09/30201918 DC 09/30201918 DC. BS EN 15947-4. Pyrotechnic articles. Fireworks, categories 1, 2 and 3. Part 4. Test methods
09/30201921 DC 09/30201921 DC. BS EN 15947-5. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 5. Requirements for construction and performance
09/30202307 DC 09/30202307 DC. BS EN 12514-1. Parts for supply systems for consuming units with liquid fuels. Part 1. Safety requirements and tests. Terminology, general requirements
09/30202310 DC 09/30202310 DC. BS EN 12514-2. Parts for supply systems for consuming units with liquid fuels. Part 2. Safety requirements and tests. Feed pumps, control and safety devices, service vessels
09/30202313 DC 09/30202313 DC. BS EN 12514-3. Parts for supply systems for consuming units with liquid fuels. Part 3. Safety requirements and tests. Valves and meters
09/30202316 DC 09/30202316 DC. BS EN 12514-4. Parts for supply systems for consuming units with liquid fuels. Part 4. Safety requirements and tests. Pipings and parts within pipelines
09/30202535 DC 09/30202535 DC. BS EN 15955-1. Railway applications. Track. Demountable machines and associated equipment. Part 1. Technical requirements for running and working
09/30202633 DC 09/30202633 DC. BS ISO 5751-1. Motorcycle tyres and rims (metric series). Part 1. Design guides
ISO/TS22745-30 : 2009 CD EDTN1 ISO/TS22745-30 : 2009 CD EDTN1. ISO/TS 22745-30 Industrial automation systems and integration - Open technical dictionaries and their application to master data -. Part 30: Identification guide representation
09/30204029 DC 09/30204029 DC. BS EN 61439-1. Low-voltage switchgear and controlgear assemblies. Part 1. General rules
09/30204033 DC 09/30204033 DC. BS EN 61439-2. Low-voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies
09/30204136 DC 09/30204136 DC. BS ISO 30002. Ships and marine technology. Ship recycling management systems. Guidelines for selection of ship recyclers (and pro forma contract)
09/30204756 DC 09/30204756 DC. BS ISO/IEC 11770-1. Information technology. Security techniques. Key management. Part 1. Framework
09/30205407 DC 09/30205407 DC. BS IEC 60747-1 AMD1. Semiconductor devices. Part 1. General
09/30205410 DC 09/30205410 DC. BS EN 62271-204. High-voltage switchgear and controlgear. Part 204. Rigid high-voltage, gas-insulated transmission lines for rated voltages of 72,5 kV and above
09/30205415 DC 09/30205415 DC. BS EN 60312-1. Vacuum cleaners for houshold use. Part 1. Dry vacuum. Methods for measuring performance
09/30205442 DC 09/30205442 DC. BS EN 61375-1. Electronic railway equipment. Train communication network. Part 1. TCN. Train communication network. General architecture
09/30205446 DC 09/30205446 DC. BS EN 61375-2-1. Electronic railway equipment. Train communication network. Part 2-1. WTB. Wire Train Bus
09/30205450 DC 09/30205450 DC. BS EN 61375-2-2. Electronic railway equipment. Train communication network. Part 2-2. WTB. Wire Train Bus conformance testing
09/30205454 DC 09/30205454 DC. BS EN 61375-3-1. Electronic railway equipment. Train communication network. Part 3-1. MVB. Multipurpose Vehicle Bus
09/30205458 DC 09/30205458 DC. BS EN 61375-3-2. Electronic railway equipment. Train communication network. Part 3-2. MVB. Multipurpose Vehicle Bus conformance testing
09/30205462 DC 09/30205462 DC. BS EN 61375-3-3. Electronic railway equipment. Train communication network. Part 3-3. CCN. CANopen Consist Network Bus
ISO/IEC/TR29138-1 : 2009 EDTN1 ISO/IEC/TR29138-1 : 2009 EDTN1. ISO/IEC 29138-1 Information technology - Accessibility considerations for people with disabilities - . Part 1: User needs summary
ISO/IEC/TR29138-3 : 2009 EDTN1 ISO/IEC/TR29138-3 : 2009 EDTN1. ISO/IEC/TR 29138-3 Information technology - Accessibility considerations for people with disabilities - . Part 3: Guidance on user needs mapping
ISO/IEC/TR29138-2 : 2009 EDTN1 ISO/IEC/TR29138-2 : 2009 EDTN1. ISO/IEC/TR 29138-2 Information technology - Accessibility considerations for people with disabilities - . Part 2: Standards inventory
09/30205330 DC 09/30205330 DC. BS EN 61158-3-22. Industrial communication networks. Fieldbus specifications. Part 3-22. Data-link layer service definition. Type 22 elements
09/30205326 DC 09/30205326 DC. BS EN 61784-3 AMD1. Industrial communication networks. Profiles. Part 3. Functional safety fieldbuses. Additional specifications for CPF 18
09/30205322 DC 09/30205322 DC. BS EN 61784-2 AMD1. Industrial communication networks. Profiles. Part 2. Additional fieldbus profiles for real-time networks (CPF18)
09/30205304 DC 09/30205304 DC. BS EN 3280. Aerospace series. Bearings, airframe rolling, rigid or self-aligning. Technical specification
09/30205302 DC 09/30205302 DC. BS EN 4687. Aerospace series. Paints and varnishes. Chromate free (non corrosion inhibiting) two component cold curing primer. Chromat free primer for military application
09/30205299 DC 09/30205299 DC. BS EN 4688. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing epoxy primer. High corrosion resistance for military application
09/30205296 DC 09/30205296 DC. BS EN 4165-026. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175°C continuous. Part 026. Shielded accessories for single modules
09/30205295 DC 09/30205295 DC. BS EN 4165-025. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175°C continuous. Part 025. Single module receptacle
09/30205293 DC 09/30205293 DC. BS EN 4689. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
09/30205291 DC 09/30205291 DC. BS EN 4165-024. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175°C continuous. Part 024. Single module plug
09/30205281 DC 09/30205281 DC. BS EN 50191. Erection and operation of electrical test equipment
09/30205276 DC 09/30205276 DC. BS EN 2311. Aerospace series. Bushes with self-lubricating liner. Technical specification
09/30205272 DC 09/30205272 DC. BS EN 61290-4-2. Optical amplifiers. Test methods. Part 4-2. Gain transient parameters. Broadband source method
09/30205262 DC 09/30205262 DC. BS EN 61290-4-1. Optical amplifiers. Test methods. Part 4-1. Gain transient parameters. Two-wavelength method
09/30205261 DC 09/30205261 DC. BS ISO/IEC 19794-2 AMD1. Information technology. Biometric data interchange formats. Part 2. Finger minutiae data
09/30205256 DC 09/30205256 DC. BS EN 2483. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Forgings. De ≤ 100 mm
09/30205255 DC 09/30205255 DC. BS EN 2482. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 100 mm
09/30205254 DC 09/30205254 DC. BS EN 2481. Aerospace series. Steel FE-PL76. 1250 MPa ≤ Rm ≤ 1400 MPa. Forgings De ≤ 75 mm
09/30205253 DC 09/30205253 DC. BS EN 4266. Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated, wide series. Dimensions and loads. Inch series
09/30205182 DC 09/30205182 DC. BS EN 50310. Application of equipotential bonding and earthing in buildings with information technology equipment
09/30205176 DC 09/30205176 DC. BS ISO/TS 25680. Medical laboratories. Calculation and expression of measurement uncertainty
09/30205027 DC 09/30205027 DC. BS EN 4265. Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel, wide series. Dimensions and loads. Inch series
09/30205023 DC 09/30205023 DC. BS EN 61158-2. Industrial communication networks. Fieldbus specifications. Part 2. Physical layer specification and service definition
09/30202639 DC 09/30202639 DC. BS ISO 5751-3. Motorcycle tyres and rims (metric series). Part 3. Range of approved rim contours
09/30202636 DC 09/30202636 DC. BS ISO 5751-2. Motorcycle tyres and rims (metric series). Part 2. Tyre dimensions and load-carrying capacities
09/30202630 DC 09/30202630 DC. BS ISO 4249-3. Motorcycle tyres and rims (code-designated series). Part 3. Rims
09/30202303 DC 09/30202303 DC. BS EN 13420. Windows. Behaviour between different climates. Test method
09/30202015 DC 09/30202015 DC. BS EN 15443. Solid recovered fuels. Methods for the preparation of the laboratory sample
09/30202012 DC 09/30202012 DC. BS EN 15442. Solid recovered fuels. Methods for sampling
09/30202009 DC 09/30202009 DC. BS EN 15440. Solid recovered fuels. Method of the determination of biomass content
09/30202006 DC 09/30202006 DC. BS EN 15359. Solid recovered fuels. Specifications and classes
09/30202002 DC 09/30202002 DC. BS EN 15358. Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
09/30201852 DC 09/30201852 DC. BS ISO/IEC 19785-2 AMD1. Information technology. Common biometric exchange formats framework. Part 2. Procedures for the operation of the biometric registration authority
09/30201849 DC 09/30201849 DC. BS ISO/IEC 19785-1 AMD1. Information technology. Common biometric formats framework. Part 1. Data element specification
09/30201334 DC 09/30201334 DC. BS ISO 13127. Packaging. Child resistant packaging. Mechanical test methods for reclosable child resistant packaging systems
09/30200831 DC 09/30200831 DC. BS EN 15312 AMD1. Free access multi-sports equipment. Requirements, including safety, and test methods
09/30196835 DC 09/30196835 DC. BS 8529. Composite doorsets. Domestic external doorsets. Specification
09/30196832 DC 09/30196832 DC. BS ISO 12690. Thermal spraying. Thermal spray coordination. Tasks and responsibilities
09/30192428 DC 09/30192428 DC. BS ISO 9241-129. Ergonomics of human-system interaction. Part 129. Guidance on individualization
09/30188300 DC 09/30188300 DC. BS ISO 24343-3. Resilient and laminate floor coverings. Determination of indentation and residual indentation. Part 3. Resilient semi-flexible/vinyl composition tiles. Indentation
09/30185992 DC 09/30185992 DC. BS EN 13674-1. Railway applications. Track. Rail. Part 1. Vignole railway rails 46 kg/m and above
09/30185845 DC 09/30185845 DC. BS EN 13126-5. Building hardware. Hardware for windows and balcony doors. Requirements and test methods. Part 5. Devices that restrict the opening of windows
09/30175534 DC 09/30175534 DC. BS ISO/IEC 29109-2. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Part 2. Finger minutiae data
09/30175345 DC 09/30175345 DC. BS EN ISO 29701. Nanotechnologies. Endotoxin test on nanomaterial samples for in vitro systems. Limulus amebocyte lysate (LAL) test
09/30175342 DC 09/30175342 DC. BS ISO 10801. Nanotechnologies. Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
09/30173892 DC 09/30173892 DC. BS ISO 16532-3. Paper and board. Determination of grease resistance. Part 3. Turpentine test for voids in glassine and greaseproof papers
09/30167487 DC 09/30167487 DC. BS ISO 21457. Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
09/30167109 DC 09/30167109 DC. BS ISO 3690. Welding and allied processes. Determination of hydrogen content in arc weld metal
PAS 122:2009 PAS 122:2009. Specification for the installation of audiovisual equipment in classrooms and general publicly accessible areas
09/30093195 DC 09/30093195 DC. BS 6349-2. Maritime works. Part 2. Code of practice for the design of quay walls, jetties and dolphins



Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment