2009/09/07

Cheapest & Latest BSI Standard (PDF) (61)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS ISO/IEC 9646-4:1991, EN 29646-4:1992 BS ISO/IEC 9646-4:1991, EN 29646-4:1992. Information technology. Open systems interconnection. Conformance testing methodology and framework. Test realization
BS EN 29646-5:1992, EN 29646-5:1992 BS EN 29646-5:1992, EN 29646-5:1992. Information technology. Open Systems Interconnection. Conformance testing methodology and framework. Requirements on test laboratories and clients for the conformance assessment process
BS 6686:Part 2:Section 2.4:1991, IEC 60704-2-4:1989 BS 6686:Part 2:Section 2.4:1991, IEC 60704-2-4:1989. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Washing machines and spin extractors
BS 7442-0:1991 BS 7442-0:1991. Rubber or plastics covered rollers. Introduction
BS 7442:Part 3:Section 3.1:1991, ISO 7267/1:1986 BS 7442:Part 3:Section 3.1:1991, ISO 7267/1:1986. Rubber or plastics covered rollers. Method of test. Determination of apparent hardness (IRHD method)
BS EN 61054:1993, IEC 61054:1991 BS EN 61054:1993, IEC 61054:1991. Helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type VHS. FM audio recording
BS ISO/IEC TR 9573-13:1991 BS ISO/IEC TR 9573-13:1991. Information processing. SGML support facilities. Techniques for using SGML. Public entity sets for mathematics and science
BS 1449-1.1:1991 BS 1449-1.1:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification
BS 1449:Part 1:Section 1.2:1991 BS 1449:Part 1:Section 1.2:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled steel plate, sheet and wide strip based on formability
BS 1449:Part 1:Section 1.3:1991 BS 1449:Part 1:Section 1.3:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled steel plate, sheet and wide strip for vitreous enamelling based on formability
BS 1449:Part 1:Section 1.4:1991 BS 1449:Part 1:Section 1.4:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled wide material based on specified minimum strength
BS 1449:Part 1:Section 1.5:1991 BS 1449:Part 1:Section 1.5:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled wide material based on specified minimum strength
BS 1449-1.8:1991 BS 1449-1.8:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip based on formability
BS 1449:Part 1:Section 1.9:1991 BS 1449:Part 1:Section 1.9:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled narrow strip based on formability
BS 1449:Part 1:Section 1.10:1991 BS 1449:Part 1:Section 1.10:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip based on specified minimum strength
BS 1449:Part 1:Section 1.11:1991 BS 1449:Part 1:Section 1.11:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled narrow strip based on specified minimum strength
BS 1449:Part 1:Section 1.12:1991 BS 1449:Part 1:Section 1.12:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for tolerances on dimensions and shape for hot rolled narrow strip
BS 1449:Part 1:Section 1.13:1991 BS 1449:Part 1:Section 1.13:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for tolerances on dimensions and shape for cold rolled narrow strip
BS 1449-1.14:1991 BS 1449-1.14:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes
BS 1449-1.15:1991 BS 1449-1.15:1991. Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes
BS 4965:1991 BS 4965:1991. Specification for decorative laminated plastics sheet veneered boards and panels
BS EN 20535:1994, ISO 535:1991 BS EN 20535:1994, ISO 535:1991. Paper and board. Determination of water absorptiveness. Cobb method
BS 6270-3:1991 BS 6270-3:1991. Code of practice for cleaning and surface repair of buildings. Metals (cleaning only)
BS 7121-2:1991 BS 7121-2:1991. Code of practice for safe use of cranes. Inspection, testing and examination
BS 7404-1.1:1991, IEC 60870-1-1:1988 BS 7404-1.1:1991, IEC 60870-1-1:1988. Telecontrol equipment and systems. General considerations. General principles
BS 7404:Part 1:Section 1.3:1991, IEC 60870-1-3:1990 BS 7404:Part 1:Section 1.3:1991, IEC 60870-1-3:1990. Telecontrol equipment and systems. General considerations. Glossary
BS 7404:Part 2:Section 2.1:1991 BS 7404:Part 2:Section 2.1:1991. Telecontrol equipment and systems. Operating conditions. Specification for classes of environmental conditions and power supplies
BS 7404-3:1991, IEC 60870-3:1989 BS 7404-3:1991, IEC 60870-3:1989. Telecontrol equipment and systems. Specification for interfaces (electrical characteristics)
BS 7404-4:1991, IEC 60870-4:1990 BS 7404-4:1991, IEC 60870-4:1990. Telecontrol equipment and systems. Specification for performance
BS EN 438-2:1991 BS EN 438-2:1991. Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. Determination of properties
BS EN 10029:1991 BS EN 10029:1991. Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3 mm thick or above
BS 6686:Part 2:Section 2.3:1991 BS 6686:Part 2:Section 2.3:1991. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Dishwashers
BS 1006:B01C:LFS3:1989 BS 1006:B01C:LFS3:1989. Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 3
BS 1006:B01C:LFS4:1990 BS 1006:B01C:LFS4:1990. Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 4
BS 1006:B01C:LFS5:1988 BS 1006:B01C:LFS5:1988. Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 5
BS 1006:B01C:LFS6:1988 BS 1006:B01C:LFS6:1988. Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 6
BS 1006:B01C:LFS8:1987 BS 1006:B01C:LFS8:1987. Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 8
BS 3930:Part 2:1991, ISO 594-2:1991 BS 3930:Part 2:1991, ISO 594-2:1991. Conical fittings with a 6% (Luer) taper for syringes, needles and other medical equipment. Specification for lock fittings
BS 5293-19:1991, ISO 6894:1991 BS 5293-19:1991, ISO 6894:1991. Sampling and testing carbon black for use in the rubber industry. Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)
BS EN 24006:1993, ISO 4006:1991 BS EN 24006:1993, ISO 4006:1991. Measurement of fluid flow in closed conduits. Vocabulary and symbols
BS 6102-4:1991, ISO 8090:1989 BS 6102-4:1991, ISO 8090:1989. Cycles. Glossary of terms
BS 6199-1.2:1991, ISO 9368-1:1990 BS 6199-1.2:1991, ISO 9368-1:1990. Measurement of liquid flow in closed conduits using weighing and volumetric methods. Weighing method. Procedures for checking static weighing systems
BS CECC 00111-2:1991 BS CECC 00111-2:1991. Rule of Procedure 11. Specifications. Regulations for CECC Specifications for components of enhanced assessment of quality
BS CECC 00111-3:1991 BS CECC 00111-3:1991. Rule of Procedure 11. Specifications. Regulations for CECC Specifications for components for general and professional (civil and military) usage (excluding detail specifications)
BS CECC 00111-4:1991 BS CECC 00111-4:1991. Rule of Procedure 11. Specifications. Regulations for CECC detail specifications
BS CECC 00111-5:1991 BS CECC 00111-5:1991. Rule of Procedure 11. Specifications. Preparation of specifications under the Single Originator Procedure
BS 3396-1:1991 BS 3396-1:1991. Woven glass fibre fabrics for plastics reinforcement. Specification for loom-state fabrics
BS ISO 6199:1991 BS ISO 6199:1991. Micrographics. Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm. Operating procedures
BS EN 29104:1993, ISO 9104:1991 BS EN 29104:1993, ISO 9104:1991. Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS ISO/IEC 10039:1991 BS ISO/IEC 10039:1991. Information technology. Open Systems Interconnection. Local area networks. Medium Access Control (MAC) service definition
BS B 23:1991 BS B 23:1991. Specification for copper-aluminium-nickel-iron alloy rods, sections, forging stock and forgings
BS B 24:1991 BS B 24:1991. Specification for copper-tin-phosphorous alloy rods and sections
BS B 25:1991 BS B 25:1991. Specification for copper-nickel-silicon alloy rods, sections, forging stock and forgings (heat treated)
BS B 26:1991 BS B 26:1991. Specification for copper-nickel-silicon alloy rods and sections (cold worked and heat treated)
BS B 27:1991 BS B 27:1991. Specification for copper-zinc-aluminium-nickel-silicon alloy tube
BS 9000:Part 2:1991 BS 9000:Part 2:1991. General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the CECC system
BS 9000:Part 3:1991 BS 9000:Part 3:1991. General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the IECQ system
BS 9000-4:1991 BS 9000-4:1991. General requirements for a system for electronic components of assessed quality. Specification of procedures for the approval of an organization
BS EN ISO 862:1995 BS EN ISO 862:1995. Glossary of terms for surface active agents
BS 4370-4:1991 BS 4370-4:1991. Methods of test for rigid cellular materials. Method 14. Determination of flexural properties
BS 7523:1991 BS 7523:1991. Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework
BS 1133-4:1991 BS 1133-4:1991. Packaging code. Mechanical aids in package handling
BS 5752-5:1991, ISO 4150:1991 BS 5752-5:1991, ISO 4150:1991. Methods of test for coffee and coffee products. Green coffee: size analysis by manual sieving
BS 6829-1.6:1991, ISO 6839:1982 BS 6829-1.6:1991, ISO 6839:1982. Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
BS 0:Part 1:1991 BS 0:Part 1:1991. A standard for standards. Guide to general principles of standardization
BS 4778-3.1:1991 BS 4778-3.1:1991. Quality vocabulary. Availability, reliability and maintainability terms. Guide to concepts and related definitions
BS CECC 00104:1991 BS CECC 00104:1991. Rule of Procedure 4. CECC Working Groups. General rules and additional rules
BS 0:Part 2:1991 BS 0:Part 2:1991. A standard for standards. Guide to BSI committee procedures
BS 903-A38:1991, ISO 4648:1991 BS 903-A38:1991, ISO 4648:1991. Physical testing of rubber. Methods for the determination of dimensions of test pieces and products for test purposes
BS EN 278:1991 BS EN 278:1991. Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
BS EN 60534-8-2:1993 BS EN 60534-8-2:1993. Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS AU 50-1.3.2a:1991, ISO 4250-2:1991 BS AU 50-1.3.2a:1991, ISO 4250-2:1991. Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for narrow and wide base tyre loads and inflation pressures
BS EN 230:1991 BS EN 230:1991. Specification for monobloc oil burners. Safety, control and regulation devices and safety times
BS ISO/IEC 9496:1989 BS ISO/IEC 9496:1989. CCITT high level language (CHILL)
BS 7378:Part 1:1991 BS 7378:Part 1:1991. Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface. General requirements
BS 5348-1:1991, ISO 3100-1:1991 BS 5348-1:1991, ISO 3100-1:1991. Methods for sampling meat and meat products. Taking primary samples
BS 2782-1:Method 153A:1991, ISO 458-1:1985 BS 2782-1:Method 153A:1991, ISO 458-1:1985. Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (general method)
BS 2782-1:Method 153B:1991, ISO 458-2:1985 BS 2782-1:Method 153B:1991, ISO 458-2:1985. Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds)
BS AU 243-1:1991, ISO 7637-0:1990 BS AU 243-1:1991, ISO 7637-0:1990. Methods of test for electrical disturbance by conduction and coupling. General
BS AU 243-2:1991, ISO 7637-1:1990 BS AU 243-2:1991, ISO 7637-1:1990. Methods of test for electrical disturbance by conduction and coupling. Electrical transient conduction along supply lines only on passenger cars and light commercial vehicles with 12 V supply
BS ISO 9230:1991 BS ISO 9230:1991. Information and documentation. Determination of price indexes for books and serials purchased by libraries
BS ISO 6200:1991 BS ISO 6200:1991. Micrographics. First generation silver-gelatin microforms of source documents. Density specifications
BS 65:1991 BS 65:1991. Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
BS 146:1991 BS 146:1991. Specification for Portland blastfurnace cement
BS 5328:Part 2:1991 BS 5328:Part 2:1991. Concrete. Methods for specifying concrete mixes
BS AU 50-1.2.2:1991, ISO 9112:1991 BS AU 50-1.2.2:1991, ISO 9112:1991. Tyres and wheels. Tyres. Commercial vehicle tyres. Method of measuring tyre rolling circumference. Loaded new tyres
BS EN 60182-2:1991 BS EN 60182-2:1991. Basic dimensions of winding wires. Specification for maximum overall diameters of enamelled round winding wires
BS 6657:1991 BS 6657:1991. Guide to prevention of inadvertent initiation of electro-explosive devices by radio-frequency radiation
BS 7527-2.2:1991, IEC 60721-2-2:1988 BS 7527-2.2:1991, IEC 60721-2-2:1988. Classification of environmental conditions. Environmental conditions appearing in nature. Precipitation and wind
BS 7527-2.7:1991, IEC 60721-2-7:1987 BS 7527-2.7:1991, IEC 60721-2-7:1987. Classification of environmental conditions. Environmental conditions appearing in nature. Fauna and flora
DD ENV 308:1991 DD ENV 308:1991. Heat exchangers. Test procedures for establishing performance of air to air and flue gases heat recovery devices
BS ISO/IEC TR 10172:1991 BS ISO/IEC TR 10172:1991. Information technology. Telecommunications and information exchange between systems. Network Transport Protocol interworking specification
BS EN 26704:1991, ISO 6704:1982 BS EN 26704:1991, ISO 6704:1982. Classification of automatic steam traps
BS QC 750104:1991 BS QC 750104:1991. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Bipolar transistors for switching applications
BS QC 750107:1991 BS QC 750107:1991. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank detail specification. Case-rated bipolar transistors for high-frequency amplifications
BS EN 120001:1993 BS EN 120001:1993. Harmonized system of quality assessment for electronic components. Blank detail specification. Light emitting diodes, light emitting diode arrays, light emitting diode displays without internal logic and resistor
BS EN 120007:1993 BS EN 120007:1993. Harmonized system of quality assessment for electronic components. Blank detail specification. Liquid crystal displays. Monochrome LCDs without electronic circuit
BS 6807:1986 BS 6807:1986. Methods of test for the ignitability of mattresses with primary and secondary sources of ignition
BS ISO/IEC TR 9577:1990 BS ISO/IEC TR 9577:1990. Information technology. Telecommunications and information exchange between systems. Protocol identification in the network layer
BS 6068:Part 0:1988 BS 6068:Part 0:1988. Water quality. Introduction
BS EN 26922:1993, ISO 6922:1987 BS EN 26922:1993, ISO 6922:1987. Adhesives. Determination of tensile strength of butt joints
BS EN 60118-7:1993, IEC 60118-7:1983 BS EN 60118-7:1993, IEC 60118-7:1983. Hearing aids. Methods for measurement of the performance characteristics of hearing aids for quality inspection on delivery
BS 5067:1985 BS 5067:1985. Specification for flameproof transformers for use in mines
BS 6652:1985 BS 6652:1985. Specification for packagings resistant to opening by children
BS EN 190103:1994 BS EN 190103:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS
BS CECC 90202:1985 BS CECC 90202:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated operational amplifiers
BS EN 27828:1994, ISO 7828-1985 BS EN 27828:1994, ISO 7828-1985. Water quality. Methods for biological testing. Methods of biological sampling: guidance on handnet sampling of aquatic benthic macro-invertebrates
BS 1133-7.1:1986 BS 1133-7.1:1986. Packaging code. Paper and board wrappers, bags and containers. Wrapping papers
BS 3321:1986 BS 3321:1986. Method for measurement of the equivalent pore size of fabrics (bubble pressure test)
BS 6676-1:1986 BS 6676-1:1986. Thermal insulation of cavity walls using man-made mineral fibre batts (slabs). Specification for man-made mineral fibre batts (slabs)
BS EN 28265:1994, ISO 8265:1988 BS EN 28265:1994, ISO 8265:1988. Water quality. Biological methods. Methods of biological sampling: guidance on the design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwater
BS 8000-4:1989 BS 8000-4:1989. Workmanship on building sites. Code of practice for waterproofing
PD 6524:1989, IEC 60943:1989 PD 6524:1989, IEC 60943:1989. Guide to specifying permissible temperature and temperature rise for parts of electrical equipment, in particular for terminals
BS 7182:1989 BS 7182:1989. Specification for air-impermeable chemical protective clothing
BS EN 20286-1:1993, ISO 286-1:1988 BS EN 20286-1:1993, ISO 286-1:1988. ISO system of limits and fits. ISO system of limits and fits. Bases of tolerances, deviations and fits
BS 7106:Part 3:1989, EN 27811-3:1989,ISO 7811-3:1985 BS 7106:Part 3:1989, EN 27811-3:1989,ISO 7811-3:1985. Guide to recording techniques for information on identification cards. Guide to recording techniques for information on identification cards. Location of embossed characters on ID-1 cards
DD 182:1990, ISO/IEC TR 9973:1988 DD 182:1990, ISO/IEC TR 9973:1988. Computer graphics: procedures for registration of graphical items
BS EN 28692:1993, BS 6068-5.10:1990,ISO 8692:1989 BS EN 28692:1993, BS 6068-5.10:1990,ISO 8692:1989. Water quality. Biological methods. Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum
BS 3456:Part 202:Section 202.4:1990, EN 60335-2-4:1989 BS 3456:Part 202:Section 202.4:1990, EN 60335-2-4:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements. Spin extractors
BS 3456:Part 202:Section 202.39:1990, EN 60335-2-39:1989 BS 3456:Part 202:Section 202.39:1990, EN 60335-2-39:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric multi-purpose cooking pans
BS 3456-202.46:1990, EN 60335-2-46:1989 BS 3456-202.46:1990, EN 60335-2-46:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric steam cookers
BS EN 29073-1:1992, ISO 9073-1:1989 BS EN 29073-1:1992, ISO 9073-1:1989. Methods of test for nonwovens. Methods of test for nonwovens. Determination of mass per unit area
BS EN 29073-2:1992, ISO 9073-2:1989 BS EN 29073-2:1992, ISO 9073-2:1989. Methods of test for nonwovens. Methods of test for nonwovens. Determination of thickness
BS EN 29073-3:1992, ISO 9073-3:1992 BS EN 29073-3:1992, ISO 9073-3:1992. Methods of test for nonwovens. Methods of test for nonwovens. Determination of tensile strength and elongation
BS EN 29073-4:1992, ISO 9073-4:1989 BS EN 29073-4:1992, ISO 9073-4:1989. Methods of test for nonwovens. Methods of test for nonwovens. Determination of tear resistance
BS EN 29992-1:1993 BS EN 29992-1:1993. Financial transaction cards. Messages between the integrated circuit card and the card accepting device. Concepts and structures
BS EN 27201-1:1994, ISO 7201-1:1989 BS EN 27201-1:1994, ISO 7201-1:1989. Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Specifications for halon 1211 and halon 1301
BS 6742-3:1990, EN 50053-2:1989 BS 6742-3:1990, EN 50053-2:1989. Electrostatic painting and finishing equipment using flammable materials. Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held powder spray guns (energy limit of 5 mJ) and their associated apparatus
BS 6742-4:1990, EN 50053-3:1989 BS 6742-4:1990, EN 50053-3:1989. Electrostatic painting and finishing equipment using flammable materials. Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held flock spray guns (energy limit of 0,24 mJ or 5 mJ) and their associated apparatus
PD 6528:1990, IEC 60996:1989 PD 6528:1990, IEC 60996:1989. Method for verifying accuracy of tan delta measurements applicable to capacitors
BS 3456-202.43:1990, EN 60335-2-43:1989 BS 3456-202.43:1990, EN 60335-2-43:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Specification for safety of household and similar electrical appliances. Particular requirements. Clothes dryers and towel rails
DD 194:1990, ENV 40003:1990 DD 194:1990, ENV 40003:1990. Computer integrated manufacturing (CIM): CIM systems architecture framework for modelling
BS EN 60068-2-1:1993, IEC 60068-2-1:1993 BS EN 60068-2-1:1993, IEC 60068-2-1:1993. Environmental testing. Test methods. Tests A. Cold
BS EN 27185:1992, ISO/IEC 7185:1990 BS EN 27185:1992, ISO/IEC 7185:1990. Information technology. Programming languages. Pascal
BS EN 29945-1:1993, ISO/IEC 9945-1:1990 BS EN 29945-1:1993, ISO/IEC 9945-1:1990. Information technology. Portable operating system interface (POSIX). System application program interface (API) [C LANGUAGE]
BS EN 29367-1:1994, ISO 9367-1:1989 BS EN 29367-1:1994, ISO 9367-1:1989. Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Commercial vehicles and combinations of vehicles, semi-trailers excluded
BS EN 28510-2:1993, ISO 8510-2:1990 BS EN 28510-2:1993, ISO 8510-2:1990. Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 180° peel
BS EN 28510-1:1993, ISO 8510-1:1990 BS EN 28510-1:1993, ISO 8510-1:1990. Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 90° peel
BS EN 30011-1:1993, ISO 10011-1:1990 BS EN 30011-1:1993, ISO 10011-1:1990. Guidelines for auditing quality systems. Guidelines for auditing quality systems. Auditing
BS EN 143:1991 BS EN 143:1991. Specification for particle filters used in respiratory protective equipment
DD 172:1991, ENV 41201:1988 DD 172:1991, ENV 41201:1988. Private message handling system: user agent and message transfer agent: private management domain to private management domain
BS EN 24869-1:1993, ISO 4869-1:1990 BS EN 24869-1:1993, ISO 4869-1:1990. Acoustics. Hearing protectors. Sound attenuation of hearing protectors. Subjective method of measurement
DD 202:1991, ENV 26385:1990,ISO 6385:1981 DD 202:1991, ENV 26385:1990,ISO 6385:1981. Ergonomic principles in the design of work systems
DD 203-1:1991, ISO/TR 10314-1:1990 DD 203-1:1991, ISO/TR 10314-1:1990. Industrial automation: shop floor production. Reference model for standardization and a methodology for identification of requirements
BS EN 60068-2-59:1993 BS EN 60068-2-59:1993. Environmental testing. Test methods. Test Fe and guidance. Vibration (sine-beat method)
BS EN 30011-2:1993, ISO 10011-2:1991 BS EN 30011-2:1993, ISO 10011-2:1991. Guidelines for auditing quality systems. Guidelines for auditing quality systems. Qualification criteria for quality systems auditors
BS EN 30011-3:1993, ISO 10011-3:1991 BS EN 30011-3:1993, ISO 10011-3:1991. Guidelines for auditing quality systems. Guidelines for auditing quality systems. Management of audit programmes
BS 5000:Part 16:1985 BS 5000:Part 16:1985. Rotating electrical machines of particular types or for particular applications. Rotating electrical machines with type of protection 'N'
BS 3955:1986 BS 3955:1986. Specification for electrical controls for household and similar general purposes
BS 6709:1986 BS 6709:1986. Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp
BS EN 116000-2:1994 BS EN 116000-2:1994. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. Generic data and methods of test for time delay relays
BS EN 190109:1994 BS EN 190109:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated HC MOS circuits series HC/HCT/HCU
BS 5754:1987 BS 5754:1987. Specification for electrical analogue and state signals for use in coal mines
BS 6742-1:1987, EN 50050:1986 BS 6742-1:1987, EN 50050:1986. Electrostatic painting and finishing equipment using flammable materials. Electrostatic painting and finishing equipment using flammable materials. Specification for hand-held spray guns and associated apparatus
BS 6705:1987 BS 6705:1987. Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines
BS 6704:1987 BS 6704:1987. Code of Practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
BS EN 60068-2-29:1993, IEC 60068-2-29:1987 BS EN 60068-2-29:1993, IEC 60068-2-29:1987. Environmental testing. Test methods. Environmental testing procedures. Tests. Test Eb and guidance. Bump
BS 814-1:1987, EN 210:1986 BS 814-1:1987, EN 210:1986. Mild steel and tinplate drums (light duty: fixed ends). Mild steel and tinplate drums (light duty: fixed ends). Specification for steel drums with a total capacity of 216.5 litres
BS EN 60068-2-27:1993, IEC 60068-2-27:1987 BS EN 60068-2-27:1993, IEC 60068-2-27:1987. Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ea and guidance. Shock
BS 381C:1988 BS 381C:1988. Specification for colours for identification, coding and special purposes
BS 5501-8:1988, EN 50028:1987 BS 5501-8:1988, EN 50028:1987. Electrical apparatus for potentially explosive atmospheres. Encapsulation 'm'
BS 3849:Part 1:1988, ISO 5356-1:1986 BS 3849:Part 1:1988, ISO 5356-1:1986. Conical connectors for anaesthetic and respiratory equipment. Specification for cones and sockets (excluding 8.5 mm size)
BS EN 28630-1:1992, ISO 8630-1:1987 BS EN 28630-1:1992, ISO 8630-1:1987. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Dimensional, physical and magnetic characteristics
BS EN 28630-2:1992, ISO 8630-2:1987 BS EN 28630-2:1992, ISO 8630-2:1987. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Track format A for 77 tracks
BS EN 28630-3:1992, ISO 8630-3:1987 BS EN 28630-3:1992, ISO 8630-3:1987. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Track format B for 80 tracks
BS 5406-1:1988, EN 60555-1:1987,IEC 60555-1:1982 BS 5406-1:1988, EN 60555-1:1987,IEC 60555-1:1982. Disturbances in supply systems caused by household appliances and similar electrical equipment. Glossary of terms
BS EN 60068-2-55:1993, IEC 60068-2-55:1987 BS EN 60068-2-55:1993, IEC 60068-2-55:1987. Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ee and guidance. Bounce
BS EN 28651-1:1992, ISO 8651-1:1988 BS EN 28651-1:1992, ISO 8651-1:1988. Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindings. FORTRAN
BS EN 60534-1:1993 BS EN 60534-1:1993. Industrial-process control valves. Industrial-process control valves. Control valve terminology and general considerations
BS EN 60546-1:1993 BS EN 60546-1:1993. Controllers with analogue signals for use in industrial-process control systems. Controllers with analogue signals for use in industrial-process control systems. Methods for evaluating performance
BS EN 28651-2:1992, ISO 8651-2:1988 BS EN 28651-2:1992, ISO 8651-2:1988. Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindings. Pascal
BS EN 28651-3:1992, ISO 8651-3:1988 BS EN 28651-3:1992, ISO 8651-3:1988. Information processing systems. Computer graphics. Graphical Kernel System (GKS) language bindings. Ada
BS EN 60068-3-3:1993 BS EN 60068-3-3:1993. Environmental testing. Guidance. Environmental testing. Miscellaneous. Guide to seismic test methods for equipment
BS 903-C1:1991, BS 2782-2:Method 231A:1991 BS 903-C1:1991, BS 2782-2:Method 231A:1991. Physical testing of rubber. Determination of surface resistivity
BS EN 60870-5-1:1994, IEC 60870-5-1:1990 BS EN 60870-5-1:1994, IEC 60870-5-1:1990. Telecontrol equipment and systems. Transmission protocols. Transmission frame formats
DD 203-2:1991, ISO/TR 10314-2:1991 DD 203-2:1991, ISO/TR 10314-2:1991. Industrial automation: shop floor production. Application of the reference model for standardization and methodology
BS 3416:1991 BS 3416:1991. Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water
BS 6949:1991 BS 6949:1991. Specification for bitumen-based coatings for cold application excluding use in contact with potable water
BS EN 60721-3-0:1993, IEC 60721-3-0:1984 BS EN 60721-3-0:1993, IEC 60721-3-0:1984. Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Introduction
BS ISO/IEC 9281-1:1990 BS ISO/IEC 9281-1:1990. Information technology. Picture coding methods. Identification
BS ISO 8802-2:1989 BS ISO 8802-2:1989. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Logical link control
BS 3300:1985 BS 3300:1985. Specification for paraffin unflued space heating and cooking appliances for domestic use
BS 5864:1989 BS 5864:1989. Specification for installation in domestic premises of gas-fired ducted-air heaters of rated input not exceeding 60 kW
BS 5950-1:1990 BS 5950-1:1990. Structural use of steelwork in building. Code of practice for design in simple and continuous construction: hot rolled sections
BS 7354:1990 BS 7354:1990. Code of practice for design of high-voltage open-terminal stations
BS 8210:1986 BS 8210:1986. Guide to building maintenance management
PD 6519:Part 1:1988, IEC 60479-1:1984 PD 6519:Part 1:1988, IEC 60479-1:1984. Guide to effects of current on human beings and livestock. General aspects
PD 6519-2:1988, IEC 60479-2:1987 PD 6519-2:1988, IEC 60479-2:1987. Guide to effects of current on human beings and livestock. Special aspects relating to human beings
BS AU 145b:1989 BS AU 145b:1989. Specification for retroreflecting number plates
DD ENV 41202:1991 DD ENV 41202:1991. Information systems interconnection. Message handling systems. User agent (UA) plus message transfer agent (MTA): access to an administration management domain (ADMD)
Silos Silos. Draft design code for silos, bins, bunkers and hoppers
BS EN 134104:1995 BS EN 134104:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: compression type trimmer capacitors (qualification approval)
BS EN ISO 9856:1996, BS 490-10.8:1996 BS EN ISO 9856:1996, BS 490-10.8:1996. Conveyor belts. Determination of elastic modulus
BS EN ISO 7278-1:1996 BS EN ISO 7278-1:1996. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. General principles
BS EN ISO 4267-2:1996 BS EN ISO 4267-2:1996. Petroleum and liquid petroleum products. Calculation of oil quantities. Dynamic measurements
DC95/216460 DC95/216460. Test methods for accessories for power cables with rated voltage from 3.6/6 kV (Um = 7.2 kV) up to and including 20.8/36 kV (Um = 42 kV) (prHD 628 S1)
BS 5502-32:1990 BS 5502-32:1990. Buildings and structures for agriculture. Guide to noise attenuation
BS 5911-120:1989 BS 5911-120:1989. Precast concrete pipes, fittings and ancillary products. Specification for reinforced jacking pipes with flexible joints
BS 853-1:1996 BS 853-1:1996. Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS EN 10204:1991 BS EN 10204:1991. Metallic products. Types of inspection documents
BS 3555:1988 BS 3555:1988. Specification for ring wrenches
BS 122-3:1987 BS 122-3:1987. Milling cutters. Specification for milling cutters except screwed shank cutters
BS 598-104:1989 BS 598-104:1989. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods of test for the determination of density and compaction
BS 1377-3:1990 BS 1377-3:1990. Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests
BS 7028:1988 BS 7028:1988. Guide for selection, use and maintenance of eye-protection for industrial and other uses
BS 5669:Part 1:1989 BS 5669:Part 1:1989. Particleboard. Methods of sampling, conditioning and test
BS 598-100:1987 BS 598-100:1987. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for sampling for analysis
BS 7121-1:1989 BS 7121-1:1989. Code of practice for safe use of cranes. General
BS 5502-80:1990 BS 5502-80:1990. Buildings and structures for agriculture. Code of practice for design and construction of workshops, maintenance and inspection facilities
BS 1377-2:1990 BS 1377-2:1990. Methods of test for soils for civil engineering purposes. Classification tests
BS EN 60684-1:1996, IEC 60684-1:1980 BS EN 60684-1:1996, IEC 60684-1:1980. Specification for flexible insulating sleeving. Specification for general requirements
BS EN 60215:1996, BS 3192:1996 BS EN 60215:1996, BS 3192:1996. Safety requirements for radio transmitting equipment
BS 171-3:1987 BS 171-3:1987. Power transformers. Specification for insulation levels and dielectric tests
BS 1932-2:1989 BS 1932-2:1989. Testing the strength of yarns and threads from packages. Methods for determination of knot strength and loop strength
BS 6564:Part 2:1991 BS 6564:Part 2:1991. Polytetrafluoroethylene (PTFE) materials and products. Specification for fabricated unfilled polytetrafluoroethylene products
BS 6622:1991 BS 6622:1991. Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19 000/33 000 V
BS EN ISO 7278-2:1996 BS EN ISO 7278-2:1996. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Pipe provers
BS EN ISO 8222:1996 BS EN ISO 8222:1996. Petroleum measurement systems. Calibration. Temperature corrections for use with volumetric reference measuring systems
BS EN ISO 3451-4:1996 BS EN ISO 3451-4:1996. Plastics. Determination of ash. Polyamides
BS EN ISO 1989:1996 BS EN ISO 1989:1996. Programming languages. COBOL
BS 5502-33:1991 BS 5502-33:1991. Buildings and structures for agriculture. Guide to the control of odour pollution
BS 3851:1990, ISO 1925:1990 BS 3851:1990, ISO 1925:1990. Glossary of terms used in the mechanical balancing of rotating machinery
BS 4962:1989 BS 4962:1989. Specification for plastics pipes and fittings for use as subsoil field drains
BS 5651:1989 BS 5651:1989. Method for cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies
BS 3521-2:1991 BS 3521-2:1991. Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to spectacle frames
BS 5839-1:1988 BS 5839-1:1988. Fire detection and alarm systems for buildings. Code of practice for system design, installation and servicing
BS 3456-102.34:1987 BS 3456-102.34:1987. Specification for safety of household and similar electrical appliances. Particular requirements. Motor-compressors
BS 3877:1991 BS 3877:1991. Specification for metal cutting bandsaw blades
BS 5669:Part 2:1989 BS 5669:Part 2:1989. Particleboard. Specification for wood chipboard
BS 6375-2:1987 BS 6375-2:1987. Performance of windows. Specification for operation and strength characteristics
BS 5502-43:1990 BS 5502-43:1990. Buildings and structures for agriculture. Code of practice for design and construction of poultry buildings
BS 5502-41:1990 BS 5502-41:1990. Buildings and structures for agriculture. Code of practice for design and construction of sheep buildings and pens
BS EN 60255-21-1:1996, IEC 60255-21-1:1988 BS EN 60255-21-1:1996, IEC 60255-21-1:1988. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoidal)
BS EN 60255-21-2:1996, IEC 60255-21-2:1988 BS EN 60255-21-2:1996, IEC 60255-21-2:1988. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock and bump tests
BS EN 123400:1992 BS EN 123400:1992. Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
BS EN 123300:1992 BS EN 123300:1992. Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards
BS EN 123200:1992 BS EN 123200:1992. Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plated through holes
BS EN 123100:1992 BS EN 123100:1992. Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plain holes
BS 4317-23:1990, ISO 7971-1986 BS 4317-23:1990, ISO 7971-1986. Methods of test for cereals and pulses. Determination of bulk density of cereals, called 'mass per hectolitre' (reference method)
BS 6758:1987, IEC 60558:1982 BS 6758:1987, IEC 60558:1982. Specification for type C helical video tape recorders
BS 3262:Part 2:1989 BS 3262:Part 2:1989. Hot-applied thermoplastic road marking materials. Specification for road performance
BS 4161-6:1987 BS 4161-6:1987. Gas meters. Specification for rotary displacement and turbine meters for gas pressures up to 100 bar
BS 3243:1990 BS 3243:1990. Specification for hand-operated chain blocks
BS EN 60276:1996, IEC 60276:1968 BS EN 60276:1996, IEC 60276:1968. Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
BS EN ISO/IEC 9314-3:1996 BS EN ISO/IEC 9314-3:1996. Information processing systems. Fibre Distributed Data Interface (FDDI). Physical Layer Medium Dependent (PMD)
BS EN 168200:1996 BS EN 168200:1996. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (qualification approval)
BS 3889-2A:1986 BS 3889-2A:1986. Methods for non-destructive testing of pipes and tubes. Automatic eddy current testing of wrought steel tubes
BS 845-1:1987 BS 845-1:1987. Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. Concise procedure
BS 4161:Part 5:1990 BS 4161:Part 5:1990. Gas meters. Specification for diaphragm meters for working pressures up to 7 bar
BS 4161:Part 3:1989 BS 4161:Part 3:1989. Gas meters. Specification for diaphragm meters of 6 cubic metres (or 212 cubic feet) per hour rating for working pressures up to 50 mbar
WD/BS5430-1 : 1990 WD/BS5430-1 : 1990 .
BS 499-1:1991 BS 499-1:1991. Welding terms and symbols. Glossary for welding, brazing and thermal cutting
BS 7334-3:1990, ISO 8322-3:1989 BS 7334-3:1990, ISO 8322-3:1989. Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS EN 60335-2-53:1991 BS EN 60335-2-53:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Electric sauna heating appliances
BS 6991:1990 BS 6991:1990. Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment
BS 7334-1:1990, ISO 8322-1:1989 BS 7334-1:1990, ISO 8322-1:1989. Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS 7334-2:1990, ISO 8322-2:1989 BS 7334-2:1990, ISO 8322-2:1989. Measuring instruments for building construction. Methods for determining accuracy in use: measuring tapes
BS 6972:1988 BS 6972:1988. Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use
BS 3535-2:1990 BS 3535-2:1990. Isolating transformers and safety isolating transformers. Specification for transformers for reduced system voltage
BS EN 60601-2-17:1996, BS 5724-2.17:1990,IEC 60601-2-17:1989 BS EN 60601-2-17:1996, BS 5724-2.17:1990,IEC 60601-2-17:1989. Medical electrical equipment. Particular requirements for safety. Specification for remote-controlled automatically-driven gamma-ray afterloading equipment
BS 6109-2:1989 BS 6109-2:1989. Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for passenger lifts and ramps
BS 7171:1989 BS 7171:1989. Specification for mobile elevating work platforms
BS 4533:Part 102:Section 102.2:1990, EN 60598-2-2:1989 BS 4533:Part 102:Section 102.2:1990, EN 60598-2-2:1989. Luminaires. Particular requirements. Specification for recessed luminaires
BS 5964-1:1990, ISO 4463-1:1989 BS 5964-1:1990, ISO 4463-1:1989. Building setting out and measurement. Methods of measuring, planning and organization and acceptance criteria
BS 6953:1988, ISO 7078-1985 BS 6953:1988, ISO 7078-1985. Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)
BS 7307-1:1990, ISO 7976-1:1990 BS 7307-1:1990, ISO 7976-1:1990. Building tolerances. Measurement of buildings and building products. Methods and instruments
BS EN 60335-2-44:1991 BS EN 60335-2-44:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Electric ironers
BS EN 60958:1995, BS 7239:1989,IEC 60958:1989 BS EN 60958:1995, BS 7239:1989,IEC 60958:1989. Specification for digital audio interface
BS EN 60927:1991 BS EN 60927:1991. Specification for performance requirements for starting devices (other than glow starters)
BS 5696:Part 2:1986 BS 5696:Part 2:1986. Play equipment intended for permanent installation outdoors. Specification for construction and performance
BS EN ISO 8316:1997 BS EN ISO 8316:1997. Method of liquid flow in closed conduits. Method by collection of the liquid in a volumetric tank
BS QC 760000:1990, IEC 60748-20:1988 BS QC 760000:1990, IEC 60748-20:1988. Harmonized system of quality assessment for electronic components. Film and hybrid film integrated circuits. Generic specification
BS 2654:1989 BS 2654:1989. Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry
BS EN 88:1991 BS EN 88:1991. Pressure governors for gas appliances for inlet pressures up to 200 mbar
BS 7109-3:1990, EN 27816-3:1992,ISO/IEC 7816-3:1989 BS 7109-3:1990, EN 27816-3:1992,ISO/IEC 7816-3:1989. Guide to design and use of identification cards having integrated circuits with contacts. Electronic signals and transmission protocols
BS QC 700000:1991, IEC 60747-10:1991 BS QC 700000:1991, IEC 60747-10:1991. Harmonized system of quality assessment for electric components. Generic specification for discrete devices and integrated circuits
BS 903:Part A21:1989 BS 903:Part A21:1989. Physical testing of rubber. Determination of rubber to metal bond strength
BS EN 60094-5:1994, IEC 60094-5:1988 BS EN 60094-5:1994, IEC 60094-5:1988. Magnetic tape sound recording and reproducing systems. Specification for electrical magnetic tape properties
BS 3604-1:1990 BS 3604-1:1990. Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for seamless and electric resistance welded tubes
BS 848-2:1985 BS 848-2:1985. Fans for general purposes. Methods of noise testing
BS 6493-2.3:1987, IEC 60748-3:1986 BS 6493-2.3:1987, IEC 60748-3:1986. Semiconductor devices. Integrated circuits. Recommendations for analogue integrated circuits
BS EN 60094-3:1997, BS 6288-3:1990,IEC 60094-3:1979 BS EN 60094-3:1997, BS 6288-3:1990,IEC 60094-3:1979. Magnetic tape sound recording and reproducing systems. Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
BS 8000-2.1:1990 BS 8000-2.1:1990. Workmanship on building sites. Code of practice for concrete work. Mixing and transporting concrete
BS 1503:1989 BS 1503:1989. Specification for steel forgings for pressure purposes
BS 5502-42:1990 BS 5502-42:1990. Buildings and structures for agriculture. Code of practice for design and construction of pig buildings
BS 7206:1990 BS 7206:1990. Specification for unvented hot water storage units and packages
BS 1186-3:1990 BS 1186-3:1990. Timber for and workmanship in joinery. Specification for wood trim and its fixing
BS 1186-2:1988 BS 1186-2:1988. Timber for and workmanship in joinery. Specification for workmanship
BS EN ISO 7579:1997 BS EN ISO 7579:1997. Dyestuffs. Determination of solubility of dyestuffs in organic solvents. Gravimetric method
BS EN ISO 3451-5:1997, BS 2782-4:Method 470E:1991 BS EN ISO 3451-5:1997, BS 2782-4:Method 470E:1991. Plastics. Determination of ash. Poly(vinyl chloride)
BS 7291-2:1990 BS 7291-2:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipes and associated fittings
BS EN 29899:1993, ISO/IEC 9899:1990 BS EN 29899:1993, ISO/IEC 9899:1990. Programming languages. C
BS 6399-3:1988 BS 6399-3:1988. Loading for buildings. Code of practice for imposed roof loads
BS EN ISO 4599:1997, BS 2782-8:Method 832A:1991 BS EN ISO 4599:1997, BS 2782-8:Method 832A:1991. Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method
BS 4407:1988 BS 4407:1988. Methods for quantitative analysis of fibre mixtures
BS 5371:1990, EN 60360:1989 BS 5371:1990, EN 60360:1989. Standard method of measurement of lamp cap temperature rise
BS EN ISO 8429:1997 BS EN ISO 8429:1997. Optics and optical instruments. Ophthalmology. Graduated dial scale
BS 3456-202.41:1991, EN 60335-2-41:1990 BS 3456-202.41:1991, EN 60335-2-41:1990. Specification for safety of household and similar electrical appliances. Particular requirements. Electric pumps for liquids having a temperature not exceeding 35°C
BS 3456:Part 202:Section 202.5:1990, EN 60335-2-5:1989 BS 3456:Part 202:Section 202.5:1990, EN 60335-2-5:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Dishwashers
BS EN ISO 6603-2:1997, BS 2782-3:Method 353B:1991 BS EN ISO 6603-2:1997, BS 2782-3:Method 353B:1991. Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture test
BS EN ISO 3146:1997, BS 2782-1:Methods 125A to C2 BS EN ISO 3146:1997, BS 2782-1:Methods 125A to C2. Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
BS 5885-2:1987 BS 5885-2:1987. Automatic gas burners. Specification for packaged burners with input rating 7.5 kW up to but excluding 60 kW
BS 5885-1:1988 BS 5885-1:1988. Automatic gas burners. Specification for burners with input rating 60 kW and above
BS 6853:1987 BS 6853:1987. Code of practice for fire precautions in the design and construction of railway passenger rolling stock
BS 6552:1990, EN 50049-1:1989 BS 6552:1990, EN 50049-1:1989. Specification for domestic and similar electronic equipment. Interconnection requirements: peritelevision connector
BS 5430-2:1990 BS 5430-2:1990. Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for welded steel containers of water capacity 0.5 L up to 150 L
BS 5430-3:1990 BS 5430-3:1990. Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for seamless aluminium alloy containers of water capacity 0.5 litres and above
BS 7314:1990 BS 7314:1990. Specification for electric stunners for poultry
BS 3680:Part 4G:1990, ISO 4377:1990 BS 3680:Part 4G:1990, ISO 4377:1990. Methods of measurement of liquid flow in open channels. Weirs and flumes. Flat-V weirs
BS EN ISO 8256:1997 BS EN ISO 8256:1997. Plastics. Determination of tensile-impact strength
BS EN 123000:1992 BS EN 123000:1992. Harmonized system of quality assessment for electronic components. Generic specification: printed boards
BS 5446-1:1990 BS 5446-1:1990. Components of automatic fire alarm systems for residential premises. Specification for self-contained smoke alarms and point-type smoke detectors
BS 2540:1991 BS 2540:1991. Specification for granular desiccant silica gel
BS 3523:1991 BS 3523:1991. Specification for granular desiccant silica gel impregnated with cobalt chloride
BS 6925:1988 BS 6925:1988. Specification for mastic asphalt for building and civil engineering (limestone aggregate)
BS 4966:1991 BS 4966:1991. Specification for silica refractories for use in coke ovens
BS 1501-3:1990 BS 1501-3:1990. Steels for pressure purposes. Specification for corrosion- and heat-resisting steels: plates, sheet and strip
BS EN 60286-4:1997, IEC 60286-4:1991 BS EN 60286-4:1997, IEC 60286-4:1991. Packaging of components for automatic handling. Stick magazines for dual-in-line packages
BS EN 168101:1997 BS EN 168101:1997. Harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal units (capability approval)
BS 3605-1:1991 BS 3605-1:1991. Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes
BS EN 10142:1991 BS EN 10142:1991. Specification for continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming: technical delivery conditions
BS AU 144f:1988 BS AU 144f:1988. Specification for retreaded car and commercial vehicle tyres
BS 1892-1:1986 BS 1892-1:1986. Gymnasium equipment. Specification of general requirements
BS 6977:1991 BS 6977:1991. Specification for insulated flexible cables for lifts and for other flexible connections
BS EN 60335-2-60:1991 BS EN 60335-2-60:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Whirlpool baths and similar equipment
BS 6141:1991 BS 6141:1991. Specification for insulated cables and flexible cords for use in high temperature zones
BS EN 61021-1:1997, IEC 61021-1:1990 BS EN 61021-1:1997, IEC 61021-1:1990. Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment. Specification for dimensions
BS 2494:1990 BS 2494:1990. Specification for elastomeric seals for joints in pipework and pipelines
BS EN 123500:1992 BS EN 123500:1992. Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections
BS 4213:1991 BS 4213:1991. Specification for cold water storage and combined feed and expansion cisterns (polyolefin or olefin copolymer) up to 500 L capacity used for domestic purposes
BS EN 161:1991 BS EN 161:1991. Automatic shut-off valves for gas burners and gas appliances
BS 476-23:1987 BS 476-23:1987. Fire tests on building materials and structures. Methods for determination of the contribution of components to the fire resistance of a structure
BS 1289-1:1986 BS 1289-1:1986. Flue blocks and masonry terminals for gas appliances. Specification for precast concrete flue blocks and terminals
BS 2971:1991 BS 2971:1991. Specification for class II arc welding of carbon steel pipework for carrying fluids
BS 6990:1989 BS 6990:1989. Code of practice for welding on steel pipes containing process fluids or their residuals
BS EN 20594-1:1994, ISO 594-1:1986 BS EN 20594-1:1994, ISO 594-1:1986. Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment. General requirements
BS 984:1990 BS 984:1990. Method for determination of net mass of retail packages of knitting and rug yarns
BS 5233:1986 BS 5233:1986. Glossary of terms used in metrology (incorporating BS 2643)
BS 4078-1:1987 BS 4078-1:1987. Powder actuated fixing systems. Code of practice for safe use
BS 4156:1990 BS 4156:1990. Recommendations for peat for horticultural and landscape use
BS 5306-2:1990 BS 5306-2:1990. Fire extinguishing installations and equipment on premises. Specification for sprinkler systems
BS EN 60654-4:1998, IEC 60654-4:1987 BS EN 60654-4:1998, IEC 60654-4:1987. Operating conditions for industrial-process measurement and control equipment. Corrosive and erosive influences
BS 6808-3:1989 BS 6808-3:1989. Coordinate measuring machines. Code of practice
BS 3135:1989, ISO 2314:1989 BS 3135:1989, ISO 2314:1989. Specification for gas turbine acceptance test
BS 1006:1990 BS 1006:1990. Methods of test for colour fastness of textiles and leather
BS EN 60551:1993 BS EN 60551:1993. Determination of transformer and reactor sound levels
BS 7001:1988 BS 7001:1988. Specification for interchangeability and safety of a standardized luminaire supporting coupler
BS 5606:1990 BS 5606:1990. Guide to accuracy in building
BS EN 20354:1993, ISO 354:1985 BS EN 20354:1993, ISO 354:1985. Acoustics. Measurement of sound absorption in a reverberation room
BS 3986-1:1998 BS 3986-1:1998. Methods of test for drying performance of agricultural grain dryers. General procedures and limited requirements for wheat
BS 5502-52:1991 BS 5502-52:1991. Buildings and structures for agriculture. Code of practice for design of alarm systems, emergency ventilation and smoke ventilation for livestock housing
BS 5502-23:1990 BS 5502-23:1990. Buildings and structures for agriculture. Code of practice for fire precautions
BS 5502-49:1990 BS 5502-49:1990. Buildings and structures for agriculture. Code of practice for design and construction of milking premises
BS EN 60335-2-6:1991 BS EN 60335-2-6:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Cooking ranges, cooking tables, ovens and similar appliances for household use
BS 4393:1991 BS 4393:1991. Specification for solderable tin or tin-lead coated wires for component terminations
BS EN 60674-1:1998 BS EN 60674-1:1998. Specification for plastic films for electrical purposes. Definitions and general requirements
BS EN 168000:1996 BS EN 168000:1996. Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
BS 4370-1:1988 BS 4370-1:1988. Methods of test for rigid cellular materials. Methods 1 to 5
BS 2633:1987 BS 2633:1987. Specification for Class I arc welding of ferritic steel pipework for carrying fluids
BS 5335-1:1991 BS 5335-1:1991. Continental quilts. Specification for quilts containing fillings other than feather and/or down
BS 4060:1989 BS 4060:1989. Specification for pressed wool felts
BS EN 61012:1998, IEC 61012:1990 BS EN 61012:1998, IEC 61012:1990. Filters for the measurement of audible sound in the presence of ultrasound
BS 1139-2.1:1991, EN 74:1988 BS 1139-2.1:1991, EN 74:1988. Metal scaffolding. Couplers. Specification for steel couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes
BS 6668-2:1987 BS 6668-2:1987. Textile lifting slings. Specification for roundslings made of man-made fibre for general service
BS 1629:1989 BS 1629:1989. Recommendation for references to published materials
BS 7201-1:1989 BS 7201-1:1989. Hydraulic fluid power. Gas loaded accumulators. Specification for seamless steel accumulator bodies above 0.5 L water capacity
BS 7396:1991 BS 7396:1991. Specification for permanent preformed road markings
BS 3262-3:1989 BS 3262-3:1989. Hot-applied thermoplastic road marking materials. Specification for application of material to road surfaces
BS 5306-6.1:1988 BS 5306-6.1:1988. Fire extinguishing installations and equipment on premises. Foam systems. Specification for low expansion foam systems
BS 3143-2:1990 BS 3143-2:1990. Road danger lamps. Specification for low-intensity battery-operated lamps
BS 5605:1990 BS 5605:1990. Recommendations for citing and referencing published material
BS 4723:1990 BS 4723:1990. Specification for stretch covers for upholstered furniture
BS 1129:1990 BS 1129:1990. Specification for portable timber ladders, steps, trestles and lightweight stagings
BS EN 295-3:1991 BS EN 295-3:1991. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods
BS 6100-1.3.7:1991 BS 6100-1.3.7:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Finishes
BS 5588-5:1991 BS 5588-5:1991. Fire precautions in the design, construction and use of buildings. Code of practice for firefighting stairs and lifts
BS ISO 6196-5:1987 BS ISO 6196-5:1987. Micrographics. Vocabulary. Quality of images, legibility, inspection
BS EN 60118-6:1999 BS EN 60118-6:1999. Hearing aids. Characteristics of electrical input circuits for hearing aids
BS EN 61028:1993, IEC 61028:1991 BS EN 61028:1993, IEC 61028:1991. Specification for electrical measuring instruments. X-Y recorders
BS 3539:1986 BS 3539:1986. Specification for sound level meters for the measurement of noise emitted by motor vehicles
BS 4737-4.1:1987 BS 4737-4.1:1987. Intruder alarm systems in buildings. Codes of practice. Code of practice for planning and installation
BS 2000:Part 143:1985 BS 2000:Part 143:1985. Methods of test for petroleum and its products. Asphaltenes in petroleum products (precipitation with normal heptane)
BS 3939:Part 6:1985, IEC 60617-6:1983 BS 3939:Part 6:1985, IEC 60617-6:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Production and conversion of electrical energy
BS 3939:Part 7:1985, IEC 60617-7:1983 BS 3939:Part 7:1985, IEC 60617-7:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Switchgear, controlgear and protective devices
BS 3939:Part 8:1985, IEC 60617-8:1983 BS 3939:Part 8:1985, IEC 60617-8:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Measuring instruments, lamps and signalling devices
BS 3939:Part 9:1985, IEC 60617-9:1983 BS 3939:Part 9:1985, IEC 60617-9:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Telecommunications: switching and peripheral equipment
BS 3939:Part 10:1985, IEC 60617-10:1983 BS 3939:Part 10:1985, IEC 60617-10:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Telecommunications: transmission
BS 3939:Part 11:1985, IEC 60617-11:1983 BS 3939:Part 11:1985, IEC 60617-11:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Architectural and topographical installation plans and diagrams
BS 6629:1985 BS 6629:1985. Specification for optical performance of high-visibility garments and accessories for use on the highway
BS 5117:Part 2:Section 2.3:1985 BS 5117:Part 2:Section 2.3:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Recirculating rig test
BS 5350:Part C4:1986 BS 5350:Part C4:1986. Methods of test for adhesives. Determination of impact resistance of adhesive bonds
BS 6692:Part 1:1986, ISO 6937/1-1983 BS 6692:Part 1:1986, ISO 6937/1-1983. Coded character sets for text communication. General introduction
BS 9210 N0006:Part 3:1985 BS 9210 N0006:Part 3:1985. Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cables. Parameters. Full assessment level
BS 9210 N0006:Part 1:1985 BS 9210 N0006:Part 1:1985. Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cables. Full assessment level
BS CECC 90104:1990 BS CECC 90104:1990. Specification for harmonized system of quality assessment for electronic components. Family specification: C. MOS digital integrated circuits series 4000 B and 4000 UB
BS 9530:1988 BS 9530:1988. Specification for cable fitting accessories of assessed quality for circular electrical connectors: generic data, methods of test and rules for the preparation of detail specifications
BS 6982:1988, EN 60901:1990,IEC 60901:1987 BS 6982:1988, EN 60901:1990,IEC 60901:1987. Single-capped fluorescent lamps. Safety and performance requirements
BS 7026:1989, ISO 8819:1987 BS 7026:1989, ISO 8819:1987. Method for detection of hydrogen sulphide in liquefied petroleum gases using lead acetate
BS 2000:Part 132:1987 BS 2000:Part 132:1987. Methods of test for petroleum and its products. Dropping point of lubricating grease
BS 5763:Part 12:1988, ISO 7954:1987 BS 5763:Part 12:1988, ISO 7954:1987. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of yeasts and moulds
BS 684:Part 2:Section 2.41:1987, ISO 8209-1986 BS 684:Part 2:Section 2.41:1987, ISO 8209-1986. Methods of analysis of fats and fatty oils. Other methods. Determination of erucic acid
BS 7276:1990, ISO 7941:1988 BS 7276:1990, ISO 7941:1988. Method for gas chromatographic analysis of liquefied petroleum gas
BS 6795:1987 BS 6795:1987. Specification for full sequence automatic control systems used on gas-fired appliances
BS 1344:Part 1:1987 BS 1344:Part 1:1987. Methods of testing vitreous enamel finishes. Determination of resistance to thermal shock of coatings on articles other than cooking utensils
BS 5736:Part 10:1988 BS 5736:Part 10:1988. Evaluation of medical devices for biological hazards. Method of test for toxicity to cells in culture of extracts from medical devices
BS 5070:Part 2:1988 BS 5070:Part 2:1988. Engineering diagram drawing practice. Recommendations for electrotechnology diagrams
BS 5120:1987 BS 5120:1987. Specification for rubber hoses for gas welding and allied processes
BS 9618:1988 BS 9618:1988. Specification for capability approval of quartz crystal units: generic data
BS 4129:1990 BS 4129:1990. Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel
BS 4285:Part 5:Section 5.1:1989 BS 4285:Part 5:Section 5.1:1989. Microbiological examination for dairy purposes. Ancillary methods. Resazurin reduction test for raw milk
BS 5736:Part 11:1990 BS 5736:Part 11:1990. Evaluation of medical devices for biological hazards. Method of test for haemolysis
BS 7292:1990, ISO 8884:1989 BS 7292:1990, ISO 8884:1989. Specification for layout and operation of keyboards for multiple latin-alphabet languages
BS 2638:1991, ISO 5164:1990 BS 2638:1991, ISO 5164:1990. Method for determination of knock characteristics of motor fuels (research method)
BS 2637:1991, ISO 5163:1990 BS 2637:1991, ISO 5163:1990. Method for determination of knock characteristics of motor and aviation-type fuels (motor method)
BS 4285-3.4.1:1987 BS 4285-3.4.1:1987. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of lipolytic microorganisms. Victoria blue method
BS 5750:Part 0:Section 0.2:1987, EN 29004-1987,ISO 9004-1987 BS 5750:Part 0:Section 0.2:1987, EN 29004-1987,ISO 9004-1987. Quality systems. Principal concepts and applications. Guide to quality management and quality system elements
BS 5750:Part 0:Section 0.1:1987, EN 29000-1987,ISO 9000-1987 BS 5750:Part 0:Section 0.1:1987, EN 29000-1987,ISO 9000-1987. Quality systems. Principal concepts and applications. Guide to selection and use
BS 3456:Part 202:Section 202.24:1990, EN 60335-2-24:1989 BS 3456:Part 202:Section 202.24:1990, EN 60335-2-24:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Refrigerators and food freezers
DD 200:1991 DD 200:1991. Specification for pliable non-rigid conduit and fittings for direct burial underground (type DB)
BS 6513:Part 6:1987 BS 6513:Part 6:1987. Wideband cabled distribution systems. Specification for safety requirements
BS 6701:Part 2:1987 BS 6701:Part 2:1987. Code of practice for installation of apparatus intended for connection to certain telecommunication systems. Installation of switching apparatus that may be connected to certain analogue telecommunication systems
BS 1853:Part 1:1990, EN 60081:1989,IEC 60081:1984 BS 1853:Part 1:1990, EN 60081:1989,IEC 60081:1984. Tubular fluorescent lamps for general lighting service. Specification for internationally specified lamps
BS 9550:1989 BS 9550:1989. Specification for capability approval procedures for d.c. and low frequency connector cable assemblies and wiring harnesses: generic data
BS 7077:Part 2:Section 2.1:1989, EN 29168:1989,ISO 9168:1988 BS 7077:Part 2:Section 2.1:1989, EN 29168:1989,ISO 9168:1988. Dental handpieces and accessories. Accessories. Specification for hose connectors
BS 7097:1990, ISO 6166:1987 BS 7097:1990, ISO 6166:1987. Procedure for allocating an international securities identification number (ISIN)
BS 4285:Part 3:Section 3.3:1986 BS 4285:Part 3:Section 3.3:1986. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of aerobic bacterial spores
BS 1651:1986 BS 1651:1986. Specification for industrial gloves
BS 3762:Part 3:Section 3.3:1987, ISO 2870-1986 BS 3762:Part 3:Section 3.3:1987, ISO 2870-1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of hydrolyzable and non-hydrolyzable anionic-active matter content after hydrolysis under acid conditions
BS 5736:Part 1:1989 BS 5736:Part 1:1989. Evaluation of medical devices for biological hazards. Guide for the selection of biological methods of test
BS 9230:1986 BS 9230:1986. Specification for connectors of assessed quality for optical fibres and cables: generic data and methods of test
BS 4X 17:1986 BS 4X 17:1986. Specification for varnish for aerospace purposes
BS 5796:1987, ISO 6302-1986 BS 5796:1987, ISO 6302-1986. Specification for drain fill and level plugs for earth-moving machinery
BS CECC 90109:1986 BS CECC 90109:1986. Specification for harmonized system of quality assessment for electronic components. Family specification. Digital integrated HC MOS circuits series HC/HCT/HCU
BS 6847:1987, ISO 6808-1984 BS 6847:1987, ISO 6808-1984. Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids
BS 2W 12:1989 BS 2W 12:1989. Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
BS 5750:Part 1:1987, EN 29001-1987,ISO 9001-1987 BS 5750:Part 1:1987, EN 29001-1987,ISO 9001-1987. Quality systems. Specification for design/development, production, installation and servicing
BS 5750:Part 2:1987, EN 29002-1987,ISO 9002-1987 BS 5750:Part 2:1987, EN 29002-1987,ISO 9002-1987. Quality systems. Specification for production and installation
BS 5750:Part 3:1987, EN 29003-1987,ISO 9003-1987 BS 5750:Part 3:1987, EN 29003-1987,ISO 9003-1987. Quality systems. Specification for final inspection and test
PD 6523:1989 PD 6523:1989. Information on access to and movement within and around buildings and on certain facilities for disabled people
DD 201:1991 DD 201:1991. Specification for suitability of metallic materials for use in contact with water intended for human consumption with regard to their effect on the quality of the water
BS QC 750100:1986, IEC 60747-11:1985 BS QC 750100:1986, IEC 60747-11:1985. Harmonized system of quality assessment for electronic components. Discrete semiconductor devices. Sectional specification
BS 2000:Part 136:1991 BS 2000:Part 136:1991. Methods of test for petroleum and its products. Saponification number of petroleum products
BS 2000:Part 58:1988 BS 2000:Part 58:1988. Methods of test for petroleum and its products. Softening point of bitumen (ring and ball)
BS 6802:1987, IEC 60867:1986 BS 6802:1987, IEC 60867:1986. Specification for unused insulating liquids based on synthetic aromatic hydrocarbons
BS 3365:Part 2:1987, ISO 3824-1984 BS 3365:Part 2:1987, ISO 3824-1984. Dental silicate cement and dental silico-phosphate cement. Specification for dental silico-phosphate cement (hand mixed)
BS 4999:Part 106:1987 BS 4999:Part 106:1987. General requirements for rotating electrical machines. Classification of methods of cooling
BS 4999:Part 109:1987 BS 4999:Part 109:1987. General requirements for rotating electrical machines. Specification for noise levels, including test methods
BS 6814:1987, EN 24104:1990,ISO 4104:1984 BS 6814:1987, EN 24104:1990,ISO 4104:1984. Specification for dental zinc polycarboxylate cements
BS QC 160000-1:1987, IEC 60255-7:1978 BS QC 160000-1:1987, IEC 60255-7:1978. Harmonized system of quality assessment for electronic components. Electrical relays. Generic specification: electromechanical all-or-nothing relays. Test and measurement procedures
BS QC 160000-2:1987, IEC 60255-10:1979 BS QC 160000-2:1987, IEC 60255-10:1979. Harmonized system of quality assessment for electronic components. Electrical relays. Generic specification: electromechanical all-or-nothing relays. Quality assessment procedures
BS 2X 27:1991 BS 2X 27:1991. Specification for cellulose finishing scheme for aerospace purposes
BS 5202:Part 7:1990, ISO 3400:1989 BS 5202:Part 7:1990, ISO 3400:1989. Methods for chemical analysis of tobacco and tobacco products. Determination of alkaloids in smoke condensate of cigarettes (spectrometric method)
BS 5049:1987 BS 5049:1987. Methods for measurement of radio interference characteristics of overhead power lines and high-voltage equipment
BS 3456:Part 202:Section 202.27:1991, EN 60335-2-27:1989 BS 3456:Part 202:Section 202.27:1991, EN 60335-2-27:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Ultra-violet and infra-red radiation skin treatment appliances for household and similar use
BS 9500:1990 BS 9500:1990. Specification for sockets of assessed quality for plug-in electronic components: generic data and methods of test
BS ISO/IEC 9797:1990 BS ISO/IEC 9797:1990. Data cryptographic techniques. Data integrity mechanism using a cryptographic check function employing a block cipher algorithm
BS 9215:1991 BS 9215:1991. Specification for capability approval of radio frequency connector cable assemblies and radio frequency cable assemblies: generic specification, test methods, procedures, customer blank detail specification and guidance
BS EN 100014:1992 BS EN 100014:1992. Harmonized system of quality assessment for electronic components. Basic specification: CECC assessed process average procedure (60% confidence limit)
BS 5911:Part 200:1989 BS 5911:Part 200:1989. Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced manholes and soakaways of circular cross section
BS 6703:1988 BS 6703:1988. Specification for manually operated torque wrenches and drivers
BS 4J 10:1991 BS 4J 10:1991. Specification for pressure-sensitive adhesive water resistant PVC tape
BS 3J 12:1991 BS 3J 12:1991. Specification for pressure-sensitive adhesive identification tape
BS 7073:Part 1:1989, ISO 7555:1987 BS 7073:Part 1:1989, ISO 7555:1987. Oilseeds. Specification for soya beans
BS 7073:Part 2:1989, ISO 7556:1987 BS 7073:Part 2:1989, ISO 7556:1987. Oilseeds. Specification for rape (colza) seeds with high erucic acid content
BS 7073:Part 3:1989, ISO 7557:1988 BS 7073:Part 3:1989, ISO 7557:1988. Oilseeds. Specification for rape (colza) seeds with low erucic acid content
BS ISO/IEC 9574:1989 BS ISO/IEC 9574:1989. Information technology. Telecommunications and information exchange between systems. Provision of the OSI connection-mode network service by packet mode terminal equipment connected to an Integrated Services Digital Network (ISDN)
BS 7531:1992 BS 7531:1992. Specification for compressed non-asbestos fibre jointing
BS 6692:Part 2:1990, ISO 6937-2:1983 BS 6692:Part 2:1990, ISO 6937-2:1983. Coded character sets for text communication. Specification for Latin alphabetic and non-alphabetic graphic characters
BS 3762:Part 3:Section 3.4:1991, ISO 2871-2:1990 BS 3762:Part 3:Section 3.4:1991, ISO 2871-2:1990. Analysis of formulated detergents. Quantitative test methods. Method for determination of lower molecular mass cationic-active matter content
BS 5374:1989, ISO 3166:1988 BS 5374:1989, ISO 3166:1988. Specification for codes for the representation of names of countries
DD 191:1990 DD 191:1990. Method for determination of the containment value of a laboratory fume cupboard
BS 3762:Part 3:Section 3.26:1989, ISO 2871-1:1988 BS 3762:Part 3:Section 3.26:1989, ISO 2871-1:1988. Analysis of formulated detergents. Quantitative test methods. Method for determination of high molecular mass cationic-active matter content
BSI ROOT Thesaurus BSI ROOT Thesaurus.
BS 7261:1990 BS 7261:1990. Safety of small non-domestic flueless space heaters burning 3rd family gases
BS 473; 550:1990 BS 473; 550:1990. Specification for concrete roofing tiles and fittings
BS 6535:Part 2:Section 2.2:1989 BS 6535:Part 2:Section 2.2:1989. Fire extinguishing media. Halons. Code of practice for safe handling and transfer procedures
BS ISO/IEC TR 9578:1990 BS ISO/IEC TR 9578:1990. Information technology. Communication interface connectors used in local area networks
BS 7266:Part 1:1990, EN 28877:1989,ISO 8877:1987 BS 7266:Part 1:1990, EN 28877:1989,ISO 8877:1987. Connectors for access to the Integrated Services Digital Network (ISDN). Specification for a Basic Access Interface connector and its contact assignments
BS 2000:Part 132:1990 BS 2000:Part 132:1990. Methods of test for petroleum and its products. Dropping point of lubricating grease
BS EN 2122:1990 BS EN 2122:1990. Specification for washers, flat aluminium alloy
BS 598:Part 106:1990 BS 598:Part 106:1990. Sampling and examination of bituminous mixtures for roads and other paved areas. Method for the determination of the stability index of pitch-bitumen binders
BS 7248:1990, ISO 8482:1987 BS 7248:1990, ISO 8482:1987. Specification for multipoint interconnection of data communications equipment by twisted pair cable
BS 7260:1989, IEC 60961:1989 BS 7260:1989, IEC 60961:1989. Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type L
BS 6701:Part 1:1990 BS 6701:Part 1:1990. Code of practice for installation of apparatus intended for connection to certain telecommunication systems. General recommendations
PD 6503-1:1990, ISO/TR 9122-1:1989 PD 6503-1:1990, ISO/TR 9122-1:1989. Toxicity of combustion products. General
BS 5919:1991 BS 5919:1991. Specification for children's anoraks
BS EN 21974:1994, ISO 1974:1990 BS EN 21974:1994, ISO 1974:1990. Paper. Determination of tearing resistance (Elmendorf method)
BS 5486:Part 1:1990, EN 60439-1:1990 BS 5486:Part 1:1990, EN 60439-1:1990. Low-voltage switchgear and controlgear assemblies. Requirements for type-tested and partially type-tested assemblies
BS EN ISP 10607-1:1994 BS EN ISP 10607-1:1994. Information technology. International standardized profiles AFTnn. File transfer, access and management. Specification of ACSE, presentation and session protocols for the use by FTAM
BS EN ISP 10607-3:1994 BS EN ISP 10607-3:1994. Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT 11. Simple file transfer service (unstructured)
BS 4533:Part 102:Section 102.57:1990, EN 60570:1989 BS 4533:Part 102:Section 102.57:1990, EN 60570:1989. Luminaires. Particular requirements. Electrical supply track systems for luminaires
BS ISO/IEC TR 9571:1989 BS ISO/IEC TR 9571:1989. Information technology. Open systems interconnection. LOTOS description of the session service
BS ISO/IEC TR 9572:1989 BS ISO/IEC TR 9572:1989. Information technology. Open systems interconnection. LOTOS description of the session protocol
BS IEC 796-3:1990 BS IEC 796-3:1990. Microprocessor system bus. 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
BS ISO/IEC 3309:1991 BS ISO/IEC 3309:1991. Information technology. Telecommunications and information exchange between systems. High-level Data Link Control (HDLC) procedures. Frame structure
BS 6664:Part 5:1990, ISO 2719:1988 BS 6664:Part 5:1990, ISO 2719:1988. Flashpoint of petroleum and related products. Method for determination of flashpoint by Pensky-Martens closed tester
BS 7391:1990, ISO 2977:1989 BS 7391:1990, ISO 2977:1989. Method for determination of aniline point and mixed aniline point of petroleum products and hydrocarbon solvents
BS 5253:1990, IEC 60129:1984 BS 5253:1990, IEC 60129:1984. Specification for alternating current disconnectors and earthing switches
BS 7395:1991, EN 60934:1990 BS 7395:1991, EN 60934:1990. Specification for circuit-breakers for equipment (CBE)
BS 9501:1990 BS 9501:1990. Rules for the preparation of detail specifications for in-line and pin-grid array sockets
BS IEC 796-1:1990 BS IEC 796-1:1990. Microprocessor system bus. 8-bit and 16-bit data MULTIBUS I. Functional description with electrical and timing specifications
BS IEC 796-2:1990 BS IEC 796-2:1990. Microprocessor system bus. 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct)
BS ISO/IEC TR 10034:1990 BS ISO/IEC TR 10034:1990. Guidelines for the preparation of conformity clauses in programming language standards
BS IEC 823:1990 BS IEC 823:1990. Microprocessor system bus (VMSbus). Serial sub-system bus of the IEC 821 bus (VMEbus)
BS 4360:1990 BS 4360:1990. Specification for weldable structural steels
BS EN 295-1:1991 BS EN 295-1:1991. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements
BS EN 60317-29:1997, IEC 60317-29:1990 BS EN 60317-29:1997, IEC 60317-29:1990. Specifications for particular types of winding wires. Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
BS EN 61037:1993 BS EN 61037:1993. Electricity metering. Tarriff and load control. Particular requirements for electronic ripple control receivers
BS EN 61038:1993 BS EN 61038:1993. Specification for time switches for tariff and load control
BS EN 60249-2-4:1994, IEC 60249-2-4:1987 BS EN 60249-2-4:1994, IEC 60249-2-4:1987. Specifications. Specification for epoxide woven glass fabric copper-clad laminated sheet, general purpose grade. Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade
BS EN 55013:1997 BS EN 55013:1997. Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment
BS 6160-3:1990, IEC 60489-3:1988 BS 6160-3:1990, IEC 60489-3:1988. Radio equipment used in mobile services. Methods of measurement for receivers for A3E or F3E emissions
DC90/78665 DC90/78665. Aerospace series - High speed data transmission under STANAG 3838, or fibre optic equivalent control. Technical specification
BS 5449:1990 BS 5449:1990. Specification for forced circulation hot water central heating systems for domestic premises
BS 2456:1990 BS 2456:1990. Specification for floats (plastics) for float operated valves for cold water services
BS 5502-25:1991 BS 5502-25:1991. Buildings and structures for agriculture. Code of practice for design and installation of services and facilities
BS 598-109:1990 BS 598-109:1990. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for the assessment of the compaction performance of a roller and recommended procedures for the measurement of the temperature of bituminous mixtures
BS 598-108:1990 BS 598-108:1990. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for determination of the condition of the binder on coated chippings and for measurement of the rate of spread of coated chippings
BS 598-101:1987 BS 598-101:1987. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for preparatory treatments of samples for analysis
BS 5871-1:1991 BS 5871-1:1991. Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Gas fires, convector heaters and fire/back boilers (1st, 2nd and 3rd family gases)
BS 5871-2:1991 BS 5871-2:1991. Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Inset live fuel effect gas fires of heat input not exceeding 15 kW (2nd and 3rd family gases)
BS 5871-3:1991 BS 5871-3:1991. Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Decorative fuel effect gas appliances of heat input not exceeding 15 kW (2nd and 3rd family gases)
BS IEC 60748-11:2000, QC 790100:1990 BS IEC 60748-11:2000, QC 790100:1990. Semiconductor devices. Integrated circuits. Sectional specification for semiconductor integrated circuits excluding hybrid circuits
BS 5295-0:1989 BS 5295-0:1989. Environmental cleanliness in enclosed spaces. General introduction, terms and definitions for clean rooms and clean air devices
BS 5295-2:1989 BS 5295-2:1989. Environmental cleanliness in enclosed spaces. Method for specifying the design, construction and commissioning of clean rooms and clean air devices
BS 5295-3:1989 BS 5295-3:1989. Environmental cleanliness in enclosed spaces. Guide to operational procedures and disciplines applicable to clean rooms and clean air devices
BS 5328-4:1990 BS 5328-4:1990. Concrete. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete
BS 6873:1988 BS 6873:1988. Specification for filament lamps for cycles
BS 6942-2:1989 BS 6942-2:1989. Design and construction of small kits for oxy-fuel gas welding and allied processes. Specification for kits using refillable gas containers for oxygen and fuel gas
BS EN 60968:2000 BS EN 60968:2000. Specification for self-ballasted lamps for general lighting services. Safety requirements
BS 3676-1:1989 BS 3676-1:1989. Switches for household and similar fixed electrical installations. Specification for general requirements
BS 6812-3:1991, ISO 6395:1988 BS 6812-3:1991, ISO 6395:1988. Airborne noise emitted by earth-moving machinery. Method of measurement of exterior noise in dynamic test conditions
BS 4078-2:1989 BS 4078-2:1989. Powder actuated fixing systems. Specification for tools
BS EN 60601-2-10:2001, BS 5724-2.10:1988 BS EN 60601-2-10:2001, BS 5724-2.10:1988. Medical electrical equipment. Particular requirements for the safety of nerve and muscle stimulators
BS AU 50-3.7:1985 BS AU 50-3.7:1985. Tyres and wheels. Valves. Code of practice for the selection and care of tyre inflation valves for passenger cars (including caravans and light trailers). Section 7: Code of practice for the selection and care of tyre inflation valves for passenger cars (including cartavens and light vehicles
BS AU 50-3.8:1985 BS AU 50-3.8:1985. Tyres and wheels. Valves. Code of practice for the selection and care of tyre inflation valves for commercial vehicles. Section 8a: Code of practice for the selection and care of tyre inflation valves for commercial vehicles
BS EN ISO 585:1999 BS EN ISO 585:1999. Plastics. Unplasticized cellulose acetate. Determination of moisture content
BS EN ISO 1600:1999 BS EN ISO 1600:1999. Plastics. Cellulose acetate. Determination of light absorption of moulded specimens produced using different periods of heating
BS 598-107:1990 BS 598-107:1990. Sampling and examination of bituminous mixtures for roads and other paved areas. Method of test for the determination of the composition of design wearing course rolled asphalt
BS EN 60598-2-7:1997 BS EN 60598-2-7:1997. Luminaires. Particular requirements. Portable luminaires for garden use
BS EN 295-2:1991 BS EN 295-2:1991. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling
BS EN ISO 177:2000 BS EN ISO 177:2000. Plastics. Determination of migration of plasticizers
BS EN ISO 1598:2000 BS EN ISO 1598:2000. Plastics. Cellulose acetate. Determination of insoluble particles
BS EN ISO 1157:2000 BS EN ISO 1157:2000. Plastics. Cellulose acetate in dilute solution. Determination of viscosity number and viscosity ratio
BS 7449:1991 BS 7449:1991. Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, including cabinets, shelving systems and wall hung or free standing mirrors
BS EN 60265-2:1994 BS EN 60265-2:1994. Specification for high-voltage switches. Specification for high-voltage switches. High-voltage switches for rated voltages of 52 kV and above
BS 691:1987 BS 691:1987. Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem)
BS 6985:1989 BS 6985:1989. Specification for dual-scale and ovulation clinical maximum thermometers (mercury-in-glass, enclosed scale)
BS 903-A58:1990 BS 903-A58:1990. Physical testing of rubber. Methods using the Mooney viscometer
BS 4479-8:1990 BS 4479-8:1990. Design of articles that are to be coated. Recommendations for vitreous enamel coatings
BS 7016-2:1988, ISO 7967-2:1987 BS 7016-2:1988, ISO 7967-2:1987. Components and systems of reciprocating internal combustion engines. Glossary of terms for main running gear
BS EN 3745-512:2005 BS EN 3745-512:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Flexure endurance
BS 7F 47:1990 BS 7F 47:1990. Specification for cotton tape for aerospace purposes
BS EN ISO 182-2:2000 BS EN ISO 182-2:2000. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. pH method
BS EN 12079-3:2006 BS EN 12079-3:2006. Offshore containers and associated lifting sets. Periodic inspection, examination and testing
BS EN 62197-1:2006 BS EN 62197-1:2006. Connectors for electronic equipment. Quality assessment requirements. Generic specification
BS 3999-5:1990 BS 3999-5:1990. Methods of measuring the performance of household electrical appliances. Electric cookers
BS EN ISO 7393-3:2000, BS 6068-2.27:1990 BS EN ISO 7393-3:2000, BS 6068-2.27:1990. Water quality. Determination of free chlorine and total chlorine. Iodometric titration method for the determination of total chlorine
BS EN ISO 7393-1:2000, BS 6068-2.25:1986 BS EN ISO 7393-1:2000, BS 6068-2.25:1986. Water quality. Determination of free chlorine and total chlorine. Titrimetric method using N,N-diethyl-1,4-phenylenediamine
BS EN ISO 7980:2000, BS 6068-2.30:1987 BS EN ISO 7980:2000, BS 6068-2.30:1987. Water quality. Determination of calcium and magnesium. Atomic absorption spectrometric method
BS EN ISO 7393-2:2000, BS 6068-2.26:1986 BS EN ISO 7393-2:2000, BS 6068-2.26:1986. Water quality. Determination of free chlorine and total chlorine. Colorimetric method using N,N-diethyl-1,4-phenylenediamine for routine control purposes
BS EN 60249-2-1:1994, IEC 60249-2-1:1985 BS EN 60249-2-1:1994, IEC 60249-2-1:1985. Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality. Specification No.1 Phenollic cellulose paper coper-clad laminated sheet, high electrical quality
BS EN 60249-2-2:1994, IEC 60249-2-2:1985 BS EN 60249-2-2:1994, IEC 60249-2-2:1985. Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality. Specification No 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality
BS EN 60249-2-3:1994, IEC 60249-2-3:1987 BS EN 60249-2-3:1994, IEC 60249-2-3:1987. Specifications. Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test). Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)
BS 2F 127:1991 BS 2F 127:1991. Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes
BS F 139:1989 BS F 139:1989. Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/m2) for aerospace purposes
BS 5075-3:1985 BS 5075-3:1985. Concrete admixtures. Specification for superplasticizing admixtures
BS EN ISO 1628-3:2000 BS EN ISO 1628-3:2000. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Polyethylenes and polypropylenes
BS 4443-1:1988 BS 4443-1:1988. Methods of test for flexible cellular materials. Method 4. Measurement of cell count
BS 4443-4:1989 BS 4443-4:1989. Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling
BS EN 60249-2-9:1994, IEC 60249-2-9:1987 BS EN 60249-2-9:1994, IEC 60249-2-9:1987. Specifications. Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test). Specification No.9:Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-10:1994, IEC 60249-2-10:1987 BS EN 60249-2-10:1994, IEC 60249-2-10:1987. Specifications. Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test). Specification No.10: Epoxide non-woven/ woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-11:1994, IEC 60249-2-11:1987 BS EN 60249-2-11:1994, IEC 60249-2-11:1987. Specifications. Specification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards. Specification No.11: Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards
BS EN 60249-2-12:1994, IEC 60249-2-12:1987 BS EN 60249-2-12:1994, IEC 60249-2-12:1987. Specifications. Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards. Specification No.12: Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards
BS EN ISO 3596-1:2000 BS EN ISO 3596-1:2000. Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using diethyl ether extraction (Reference method)
BS EN 60127-2:1991 BS EN 60127-2:1991. Miniature fuses. Specification for cartridge fuse-links
BS ISO/IEC 18033-2:2006 BS ISO/IEC 18033-2:2006. Information technology. Security techniques. Encryption algorithms. Asymmetric ciphers
BS 5502-21:1990 BS 5502-21:1990. Buildings and structures for agriculture. Code of practice for selection and use of construction materials
BS ISO/IEC 18031:2005 BS ISO/IEC 18031:2005. Information technology. Security techniques. Random bit generation
BS EN ISO 4611:2001 BS EN ISO 4611:2001. Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS 6155:1990 BS 6155:1990. Specification for tracheal tubes for large animals in veterinary anaesthesia
BS 7143:1989 BS 7143:1989. Specification for catheter mounts (flexible adaptors) for use with medical breathing systems
BS EN 60269-4:1996, BS 88-4:1988 BS EN 60269-4:1996, BS 88-4:1988. Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devices
BS 3320:1988 BS 3320:1988. Method for determination of slippage resistance of yarns in woven fabrics: seam method
BS EN ISO 7153-1:2001, BS 5194-1:1991 BS EN ISO 7153-1:2001, BS 5194-1:1991. Surgical instruments. Metallic materials. Stainless steel
BS 2767:1991 BS 2767:1991. Specification for manually operated copper alloy valves for radiators
BS 5385-3:1989 BS 5385-3:1989. Wall and floor tiling. Code of practice for the design and installation of ceramic floor tiles and mosaics
BS 746:1987 BS 746:1987. Specification for gas meter unions and adaptors
BS 6172:1990 BS 6172:1990. Specification for installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases)
BS 6256:1989 BS 6256:1989. Specification for paper for steam sterilization paper bags, pouches and reels for medical use
BS 5645:1987, ISO 76-1987 BS 5645:1987, ISO 76-1987. Specification for static load ratings for rolling bearings
BS QC 400600:1990, IEC 60115-8:1989 BS QC 400600:1990, IEC 60115-8:1989. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed surface mounting (chip) resistors
BS EN 60249-2-14:1994, IEC 60249-2-14:1988 BS EN 60249-2-14:1994, IEC 60249-2-14:1988. Specifications. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality
BS EN 60920:1991 BS EN 60920:1991. Ballasts for tubular fluorescent lamps. General and safety requirements
BS 6652:1989 BS 6652:1989. Specification for packagings resistant to opening by children
BS EN 60969:1993 BS EN 60969:1993. Self-ballasted lamps for general lighting services. Performance requirements
BS 1075:1989, EN 60357:1988 BS 1075:1989, EN 60357:1988. Specification for tungsten halogen lamps (non vehicle)
BS EN 60976:2001, BS 5724-3.1:1990,IEC 60976:1989 BS EN 60976:2001, BS 5724-3.1:1990,IEC 60976:1989. Medical electrical equipment. Medical electron accelerators. Functional performance characteristics
BS 4482:1985 BS 4482:1985. Specification for cold reduced steel wire for the reinforcement of concrete
BS EN 60674-2:1998 BS EN 60674-2:1998. Specification for plastic films for electrical purposes. Methods of test
BS 4778-3.2:1991, IEC 60050-191:1990 BS 4778-3.2:1991, IEC 60050-191:1990. Quality vocabulary. Availability, reliability and maintainability terms. Glossary of international terms. 3.2 glossay of international terms
BS 3F 71:1991 BS 3F 71:1991. Specification for light duty braided rubber cord
BS 3F 70:1991 BS 3F 70:1991. Specification for heavy duty braided rubber cord
BS 3202-2:1991 BS 3202-2:1991. Laboratory furniture and fittings. Specification for performance
BS EN ISO 216:2001 BS EN ISO 216:2001. Writing paper and certain classes of printed matter. Trimmed sizes. A and B series
DD CEN/TS 14418:2005 DD CEN/TS 14418:2005. Geosynthetic barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
BS ISO 8127-1:1989 BS ISO 8127-1:1989. Micrographics. A6 size microfilm jackets. Five-channel jacket for 16 mm microfilm
DD CLC/TS 60034-25:2005 DD CLC/TS 60034-25:2005. Rotating electrical machines. Guide for the design and performance of cage induction motors specifically designed for converter supply
BS EN 60925:1991 BS EN 60925:1991. Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
PD ISO/TR 10200:1990 PD ISO/TR 10200:1990. Legal admissibility of microforms
BS 6493-2.1:1985, IEC 60748-1:1984 BS 6493-2.1:1985, IEC 60748-1:1984. Semiconductor devices. Integrated circuits. General
BS EN 62319-1-1:2005 BS EN 62319-1-1:2005. Polymeric thermistors. Directly heated positive step function temperature coefficient. Blank detail specification. Current limiting application
BS 5328-3:1990 BS 5328-3:1990. Concrete. Specification for the procedures to be used in producing and transporting concrete
BS EN 60269-2:1995, BS 88-2.1:1988,IEC 60269-2:1986 BS EN 60269-2:1995, BS 88-2.1:1988,IEC 60269-2:1986. Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
BS EN 60512-12-1:2006 BS EN 60512-12-1:2006. Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12a. Solderability, wetting, solder bath method
BS EN 12435:2006 BS EN 12435:2006. Health informatics. Expression of results of measurements in health sciences
BS 1377-4:1990 BS 1377-4:1990. Methods of test for soils for civil engineering purposes. Compaction-related tests
BS 638-5:1988 BS 638-5:1988. Arc welding power sources, equipment and accessories. Specification for accessories
BS 7117-1:1991 BS 7117-1:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Specification for construction
BS EN ISO 4628-6:2001, BS 3900-H6:1991 BS EN ISO 4628-6:2001, BS 3900-H6:1991. Paints and varnishes. Evaluation of degradation of paint coatings. Designation of intensity, quantity and size of common types of defect. Rating of degree of chalking by tape method
BS EN 13022-1:2006 BS EN 13022-1:2006. Glass in building. Structural sealant glazing. Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
BS EN 15434:2006 BS EN 15434:2006. Glass in building. Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
BS 5400-1:1988 BS 5400-1:1988. Steel, concrete and composite bridges. General statement
BS 5724-3.1:Supplement No. 1:1990, IEC 60977:1989 BS 5724-3.1:Supplement No. 1:1990, IEC 60977:1989. Medical electrical equipment. Particular requirements for performance. Methods of declaring functional performance characteristics of medical electron accelerators in the range 1 MeV to 50 MeV. Guide to functional performance values
BS 5395-3:1985 BS 5395-3:1985. Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS 4592-2:1987 BS 4592-2:1987. Industrial type flooring, walkways and stair treads. Specification for expanded metal grating panels
BS 4592-3:1987 BS 4592-3:1987. Industrial type flooring, walkways and stair treads. Specification for cold formed planks
BS 3951-2.1:1991, ISO 1496-1:1990 BS 3951-2.1:1991, ISO 1496-1:1990. Freight containers. Specification and testing of series 1 freight containers. General cargo containers for general purposes
BS EN 60704-3:2006 BS EN 60704-3:2006. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Procedure for determining and verifying declared noise emission values
06/30094759 DC 06/30094759 DC. EN ISO 9241-171. Ergonomics of human-system interaction. Part 171. Guidance on software accessibility
BS EN 60127-1:1991 BS EN 60127-1:1991. Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuse-links
BS EN 60384-14-1:2005 BS EN 60384-14-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level D
BS ISO 12647-1:2004 BS ISO 12647-1:2004. Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Parameters and measurement methods
BS 6765-4:1987 BS 6765-4:1987. Leisure accommodation vehicles. Caravans. Specification for undergear
BS EN ISO 18472:2006 BS EN ISO 18472:2006. Sterilization of health care products. Biological and chemical indicators. Test equipment and methods
BS EN ISO 293:2003 BS EN ISO 293:2003. Plastics. Compression moulding test specimens of thermoplastic materials
BS EN 14750-1:2006 BS EN 14750-1:2006. Railway applications. Air conditioning for urban and suburban rolling stock. Comfort parameters
BS 6102-3:1986 BS 6102-3:1986. Cycles. Specification for photometric and physical requirements of lighting equipment
BS 2782-6:Methods 620A to 620D:1991 BS 2782-6:Methods 620A to 620D:1991. Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
BS S 162:1990 BS S 162:1990. Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted)
BS EN 14786:2006 BS EN 14786:2006. Protective clothing. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions. Atomizer test
BS EN ISO 6845:2003, ISO 6845:1989 BS EN ISO 6845:2003, ISO 6845:1989. Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
BS EN 12094-5:2006 BS EN 12094-5:2006. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for high and low pressure selector valves and their actuators
BS EN 60794-3-12:2006 BS EN 60794-3-12:2006. Optical fibre cables. Outdoor cables. Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
BS 7164-12:1991, ISO 2453:1991 BS 7164-12:1991, ISO 2453:1991. Chemical tests for raw and vulcanized rubber. Determination of bound styrene content of raw styrene-butadiene rubber; emulsion polymerized: refractive index method
BS EN 54-21:2006 BS EN 54-21:2006. Fire detection and fire alarm systems. Alarm transmission and fault warning routing equipment
BS 7363:1990 BS 7363:1990. Method for bead-on-plate (BOP) test for welds
BS 5588-10:1991 BS 5588-10:1991. Fire precautions in the design, construction and use of buildings. Code of practice for shopping complexes
BS 5551-4.2.2:1987 BS 5551-4.2.2:1987. Fertilizers. Chemical analysis. Determination of phosphorus. Extraction of phosphates soluble in mineral acids
BS AU 50-1.2.1:1991 BS AU 50-1.2.1:1991. Tyres and wheels. Tyres. Commercial vehicle tyres. Specifications for sizes, loads, inflation pressures and rims for commercial vehicle tyres
BS EN ISP 10607-2:1994 BS EN ISP 10607-2:1994. Information technology. International standardized profiles AFTnn. File transfer, access and management. Definition of document types, constraint sets and syntaxes
BS 1922:1987 BS 1922:1987. Specification for glass dispensing measures for pharmaceutical purposes
BS 1006:B01C:LFS4:1990 BS 1006:B01C:LFS4:1990.
BS IEC 60747-5-4:2006 BS IEC 60747-5-4:2006. Semiconductor devices. Discrete devices. Optoelectronic devices. Semiconductor lasers
BS 4999-145:1987 BS 4999-145:1987. General requirements for rotating electrical machines. Specification for winding terminations
BS 6048:1987, ISO 3720:1986 BS 6048:1987, ISO 3720:1986. Specification for black tea
BS 3016:1989 BS 3016:1989. Specification for pressure regulators for liquefied petroleum gases
DD CEN ISO/TS 18234-1:2006 DD CEN ISO/TS 18234-1:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Introduction, numbering and versions
DD CEN ISO/TS 18234-6:2006 DD CEN ISO/TS 18234-6:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Location referencing applications
BS EN ISO 10943:2006 BS EN ISO 10943:2006. Ophthalmic instruments. Indirect ophthalmoscopes
BS 903-A13:1990, ISO 1432:1988 BS 903-A13:1990, ISO 1432:1988. Physical testing of rubber. Method for determination of stiffness at low temperature (Gehman test)
BS 11:1985 BS 11:1985. Specification for railway rails
BS EN 15038:2006 BS EN 15038:2006. Translation services. Service requirements
BS EN ISO 11145:2006 BS EN ISO 11145:2006. Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
BS EN 50411-2-4:2006 BS EN 50411-2-4:2006. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed dome fibre splice closures type 1, for category S & A
BS ISO 15076-1:2005 BS ISO 15076-1:2005. Image technology colour management. Architecture, profile format and data structure. Based on ICC.1:2004-10
BS 5588-1:1990 BS 5588-1:1990. Fire precautions in the design, construction and use of buildings. Code of practice for residential buildings
BS 5588-6:1991 BS 5588-6:1991. Fire precautions in the design, construction and use of buildings. Code of practice for places of assembly
BS ISO 20283-3:2006 BS ISO 20283-3:2006. Mechanical vibration. Measurement of vibration on ships. Pre-installation vibratory noise measurement of shipboard equipment
BS EN 2602:2005 BS EN 2602:2005. Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration
BS 5808:1991 BS 5808:1991. Specification for underlays for textile floor coverings
BS EN 62287-1:2006 BS EN 62287-1:2006. Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS). Carrier-sense time division multiple access (CSTDMA) techniques
DD CEN/TS 14758-3:2006 DD CEN/TS 14758-3:2006. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s)(PP-MD). Guidance for installation
BS EN 60061-4:1992 BS EN 60061-4:1992. Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Guidelines and general information
BS 8100-1:1986 BS 8100-1:1986. Lattice towers and masts. Code of practice for loading Code of practice for loading
BS 6234:1987 BS 6234:1987. Specification for polyethylene insulation and sheath of electric cables
BS 6810-1:1987 BS 6810-1:1987. Determination of metals in textiles. Analysis by atomic absorption and colorimetric spectroscopy
BS 6360:1991 BS 6360:1991. Specification for conductors in insulated cables and cords
BS EN 3745-306:2005 BS EN 3745-306:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Variation of attenuation during temperature cycling
BS ISO 22672:2006 BS ISO 22672:2006. Space data and information transfer systems. Space link extension (SLE). Forward space packet service
BS EN 3745-402:2005 BS EN 3745-402:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Temperature cycling
BS EN 14257:2006 BS EN 14257:2006. Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT '91)
BS 6658:1985 BS 6658:1985. Specification for protective helmets for vehicle users
BS EN 416-2:2006 BS EN 416-2:2006. Single burner gas-fired overhead radiant tube heaters for non-domestic use. Rational use of energy
BS EN 60317-28:1997, IEC 60317-28:1990 BS EN 60317-28:1997, IEC 60317-28:1990. Specifications for particular types of winding wires. Polyesterimide enamelled rectangular copper wire, class 180
BS EN 1507:2006 BS EN 1507:2006. Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage
BS EN 4402:2006 BS EN 4402:2006. Aerospace series. Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
BS 2819:1990 BS 2819:1990. Methods for determination of bow, skew and lengthway distortion in woven and knitted fabrics
BS 8110-2:1985 BS 8110-2:1985. Structural use of concrete. Code of practice for special circumstances
WD/BS3730 PT1 : 1982, ISO 6318-1985 WD/BS3730 PT1 : 1982, ISO 6318-1985. Assessment of departures from roundness.
WD/BS3730 : 1964, ISO 6318-1985 WD/BS3730 : 1964, ISO 6318-1985.
BS817 : 1972 BS817 : 1972. Specification for surface plates
BS 3044:1990 BS 3044:1990. Guide to ergonomics principles in the design and selection of office furniture
BS EN 2235:2006 BS EN 2235:2006. Aerospace series. Single and multicore electrical cables, screened and jacketed
BS 6068-2.39:1991 BS 6068-2.39:1991. Water quality. Physical, chemical and biochemical methods. Method for the determination of sulphate using barium chloride and gravimetry
BS EN 3426:2006 BS EN 3426:2006. Aerospace series. Groove dimensions for axial mounting external type retaining rings
BS EN 10083-1:1991 BS EN 10083-1:1991. Quenched and tempered steels. Technical delivery conditions for special steels
BS 6480:1988 BS 6480:1988. Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
BS EN 60601-1:1990, BS 5724-1:1989 BS EN 60601-1:1990, BS 5724-1:1989. Medical electrical equipment. General requirements for safety
BS EN 50342-1:2006 BS EN 50342-1:2006. Lead-acid starter batteries. General requirements and methods of test
DD IEC/PAS 61169-4:2006 DD IEC/PAS 61169-4:2006. Radio-frequency connectors . Sectional specification. Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock. Characteristic impedance 50 Ω (type 7-16)
BS 4533-102.19:1990, EN 60598-2-19:1989 BS 4533-102.19:1990, EN 60598-2-19:1989. Luminaires. Particular requirements. Specification for air-handling luminaires (safety requirements)
BS 3449:1990 BS 3449:1990. Method for resistance of fabrics to water absorption (Static immersion test)
BS EN ISO 12680-1:2007 BS EN ISO 12680-1:2007. Methods of test for refractory products. Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration
BS EN ISO 4022:2006 BS EN ISO 4022:2006. Permeable sintered metal materials. Determination of fluid permeability
BS 5950-3.1:1990 BS 5950-3.1:1990. Structural use of steelwork in building. Design in composite construction. Code of practice for design of simple and continuous composite beams
BS EN ISO 15378:2007 BS EN ISO 15378:2007. Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP)
BS ISO 11898-3:2006 BS ISO 11898-3:2006. Road vehicles. Controller area network (CAN). Low-speed, fault-tolerant, medium-dependent interface
BS 5315:1991 BS 5315:1991. Hose clamps (worm drive type) for general purpose use (metric series)
BS 5839-3:1988 BS 5839-3:1988. Fire detection and alarm systems for buildings. Specification for automatic release mechanisms for certain fire protection equipment
BS EN 60439-3:1991 BS EN 60439-3:1991. Specification for low-voltage switchgear and controlgear assemblies. Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access to their use. Distribution boards
BS ISO 14513:2006 BS ISO 14513:2006. Road vehicles. Pedestrian protection. Head impact test method
BS 1377-9:1990 BS 1377-9:1990. Methods for test for soils for civil engineering purposes. In-situ tests
BS EN ISO 6327:2008 BS EN ISO 6327:2008. Gas analysis. Determination of the water dew point of natural gas. Cooled surface condensation hygrometers
BS 5892-5:1987+A2:2008 BS 5892-5:1987+A2:2008. Railway rolling stock material (metric). Specification for steel bars for retaining rings for tyred wheels
BS EN 50069:1991+A1:1993 BS EN 50069:1991+A1:1993. Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high- voltage switchgear and controlgear
BS 6878:1988+A2:1993, EN 50052:1986 BS 6878:1988+A2:1993, EN 50052:1986. Specification for high-voltage switchgear and controlgear for industrial use. Cast aluminium alloy enclosures or gas-filled high-voltage switchgear and controlgear
BS 7315:1990+A1:1993, EN 50064:1989+A1:1993 BS 7315:1990+A1:1993, EN 50064:1989+A1:1993. Specification for wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
BS ISO/IEC 19757-4:2006 BS ISO/IEC 19757-4:2006. Information technology. Document schema definition languages (DSDL). Namespace-based validation dispatching language (NVDL)
BS 2049:1985 BS 2049:1985. Specification for paraffin lighting appliances for domestic use
BS 3690-1:1989+A2:2008 BS 3690-1:1989+A2:2008. Bitumens for building and civil engineering. Specification for bitumens for roads and other paved areas
BS 476-6:1989+A1:2009 BS 476-6:1989+A1:2009. Fire tests on building materials and structures. Method of test for fire propagation for products
BS 6593:1985+A1:2009 BS 6593:1985+A1:2009. Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting



Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment