2009/09/07

Cheapest & Latest BSI Standard (PDF) (16)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


PD CEN/TR 15120:2005 PD CEN/TR 15120:2005. Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading
05/30130669 DC 05/30130669 DC. BS EN 15165. Food processing machinery. Forming machines. Safety and hygiene requirements
BS 8437:2005 BS 8437:2005. Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace
BS 2S 201:2004 BS 2S 201:2004. Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty unground wire. Specifcation
BS ISO 9130:2005 BS ISO 9130:2005. Motorcycles. Measurement method for location of centre of gravity
KIT 169 KIT 169. Insulating glass units (BS EN 1279 series) kit
KIT 168 KIT 168. CE marking for insulating glass units (BS EN 1279 series) kit
BS EN 12791:2005 BS EN 12791:2005. Chemical disinfectants and antiseptics. Surgical hand disinfection. Test method and requirement (phase 2/step2)
PD CLC/TR 50460:2005 PD CLC/TR 50460:2005. Cable networks for television signals, sound signals and interactive services. System guidelines for analogue optical transmission systems
BS ISO 9197:2006 BS ISO 9197:2006. Paper and board. Determination of water-soluble chlorides
BS EN ISO 17700:2005 BS EN ISO 17700:2005. Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing
ISO12176-3 : 2006 EDTN2 ISO12176-3 : 2006 EDTN2. ISO12176-3 : 2006 Plastics pipes and fittings . Equipment for fusion jointing polyethylene systems. Part 3: Operator's badge
BS ISO 11556:2005 BS ISO 11556:2005. Paper and board. Determination of curl using a single vertically suspended test piece
ISO/IEC23917 : 2005 EDTN1 ISO/IEC23917 : 2005 EDTN1. ISO/IEC23917 : 2005 Information technology - Telecommunications and information exchange between systems - NFCIP-1 - Protocol Test Methods
ISO/IEC23916 : 2005 EDTN1 ISO/IEC23916 : 2005 EDTN1. ISO/IEC23916 : 2005 Information technology - Telecommunications and information exchange between systems - Corporate Telecommunication Networks - Signalling Interworking between QSIG and SIP - Call Transfer
ISO/IEC23915 : 2005 EDTN1 ISO/IEC23915 : 2005 EDTN1. ISO/IEC23915 : 2005 Information technology - Telecommunications and information exchange between systems - Corporate Telecommunication Networks - Signalling Interworking between QSIG and SIP - Call Diversion
ISO/IEC23912 : 2005 EDTN1 ISO/IEC23912 : 2005 EDTN1. ISO/IEC23912 : 2005 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R)
06/30130356 DC 06/30130356 DC. ISO 23337. Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using improved lambourn test machine
DD ISO/TS 7821:2005 DD ISO/TS 7821:2005. Tobacco and tobacco products. Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
PAS 79:2005 PAS 79:2005. Fire risk assessment. Guidance and a recommended methodology
05/30130226 DC 05/30130226 DC. IEC 61496-1. Safety of machinery. Electrosensitive protective equipment. Part 1. General requirements and test
KIT 166 KIT 166. Concrete paving BS 7533 series kit
KIT 165 KIT 165. Concrete paving requirements & test methods kit
KIT 164 KIT 164. Testing concrete in structures kit
KIT 167 KIT 167. Hot rolled products of structural steels kit
KIT 163 KIT 163. Concrete standards kit
06/30130129 DC 06/30130129 DC. IEC 60050-726. International electrotechnical vocabulary. Transmission lines and waveguides
KIT 162 KIT 162. Structural bearings kit
CWA 15236:2005 CWA 15236:2005. Analysis of standardization requirements and standardization gaps for eprocurement in Europe
BS EN 2608:2005 BS EN 2608:2005. Aerospace series. Installation and removal requirements for 8° 30' adaptors, threaded, with lockring
BS EN 2605:2005 BS EN 2605:2005. Aerospace series. 24° interface for adaptors, threaded, with lockring. Geometric configuration
BS EN 2603:2005 BS EN 2603:2005. Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration
BS EN 2645:2005 BS EN 2645:2005. Aerospace series. Lockrings for adaptors, threaded, with lockring. Dimensions
05/30130008 DC 05/30130008 DC. BS F 163. Properties of elastomeric torodial sealing rings ('O' rings) manufactured from fluorocarbon low compression set rubber material. Specification
05/30130004 DC 05/30130004 DC. BS F 161. Properties of elastomric torodial sealing rings ('O' rings) manufactured from butadiene-acrylonitrile fuel and synthetic oil resistant material. Specification
05/30130001 DC 05/30130001 DC. BS F 160. Properties of elastomeric torodial sealing rings ('O' rings) manufactured from butadiene-acrylonitrile mineral oil resistant rubber material. Specification
05/30129997 DC 05/30129997 DC. BS F 158. Properties of elastomeric torodial sealing rings ('O' rings) manufactured from fluorocarbon rubber material. Specification
BS EN 12312-20:2005 BS EN 12312-20:2005. Aircraft ground support equipment. Specific requirements. Electrical ground power units
BS EN 140402-801:2005 BS EN 140402-801:2005. Detail specification: Fixed low power wire-wound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2
BS EN 13986:2004 BS EN 13986:2004. Wood-based panels for use in construction. Characteristics, evaluation of conformity and marking
BS EN ISO 6530:2005 BS EN ISO 6530:2005. Protective clothing. Protection agaist liquid chemicals. Test method for resistance of materials to penetration by liquids
05/30129845 DC 05/30129845 DC. ISO 10414-2. Petroleum and natural gas industries. Field testing of drillings fluids. Part 2. Oil-based fluids
05/30129636 DC 05/30129636 DC. IEC 61156-3 ED.3. Multicore and symmetrical pair/quad cables for digital communications. Part 3. Work area wiring. Sectional specification
DD CEN/TS 15150:2005 DD CEN/TS 15150:2005. Solid biofuels. Methods for the determination of particle density
DD CEN/TS 15149-3:2006 DD CEN/TS 15149-3:2006. Solid biofuels. Methods for the determination of particle size distribution. Rotary screen method
DD CEN/TS 15149-2:2006 DD CEN/TS 15149-2:2006. Solid biofuels. Methods for the determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
DD CEN/TS 15149-1:2006 DD CEN/TS 15149-1:2006. Solid biofuels. Methods for the determination of particle size distribution. Oscillating screen method using sieve apertures of 3,15 mm and above
DD CEN/TS 15148:2005 DD CEN/TS 15148:2005. Solid biofuels. Method for the determination of the content of volatile matter
BS ISO 21461:2006 BS ISO 21461:2006. Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
BS 5335-2:2006 BS 5335-2:2006. Continental quilts. Determination of thermal resistance for quilts filled with feather and/or down
BS ISO 7764:2006 BS ISO 7764:2006. Iron ores. Preparation of predried test samples for chemical analysis
06/30129565 DC 06/30129565 DC. ISO 12215-7. Small craft. Hull construction. Scantlings. Part 7. Multihulls
05/30129558 DC 05/30129558 DC. prEN 4700-7. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Part 7. Remelting stock
05/30129555 DC 05/30129555 DC. prEN 4700-6. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Part 6. Pre-production and production forgings
05/30129551 DC 05/30129551 DC. prEN 4700-5. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Part 5. Forging stock
BS ISO/IEC 15289:2006 BS ISO/IEC 15289:2006. Systems and software engineering. Content of systems and software life cycle process information products (documentation)
BS EN 14572:2005 BS EN 14572:2005. High performance helmets for equestrian activities
BS EN 404:2005 BS EN 404:2005. Respiratory protective devices for self-rescue. Filter self-rescuer from carbon monoxide with mouthpiece assembly
DD ISO/TS 19036:2006 DD ISO/TS 19036:2006. Microbiology of food and animal feeding stuffs. Guidelines for the estimation of measurement uncertainty for quantitative determinations
BS EN 12312-16:2005 BS EN 12312-16:2005. Aircraft ground support equipment. Specific requirements. Air start equipment
BS EN 12914:2005 BS EN 12914:2005. Products used for treatment of water intended for human consumption. Powdered perlite
BS EN 12913:2005 BS EN 12913:2005. Products used for treatment of water intended for human consumption. Powdered diatomaceous earth
BS EN 12910:2005 BS EN 12910:2005. Products used for treatment of water intended for human consumption. Garnet
BS EN 12909:2005 BS EN 12909:2005. Products used for treatment of water intended for human consumption. Anthracite
BS EN 12906:2005 BS EN 12906:2005. Products used for treatment of water intended for human consumption. Pumice
BS EN 12905:2005 BS EN 12905:2005. Products used for treatment of water intended for human consumption. Expanded aluminosilicate
05/30129421 DC 05/30129421 DC. BS EN 480-10. Admixtures for concrete, mortar and grout. Test methods. Part 10. Determination of water soluble chloride content
05/30129388 DC 05/30129388 DC. ISO 21610. Corrosion of metals and alloys. Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
BS ISO 76:2006 BS ISO 76:2006. Rolling bearings. Static load ratings
BIP 0017-1:2005 BIP 0017-1:2005. Universal Decimal Classification (UDC). Complete edition. Volume 1. Systematic tables
BIP 2075 BIP 2075. BS EN ISO 14001:2004. Environmental management systems. Requirements wit h guidance for use.A5 laminated edition
06/30129284 DC 06/30129284 DC. EN 1044. Brazing. Filler metals
05/30129278 DC 05/30129278 DC. ISO DIS 8029-2. Plastics hose. General purpose collapsible water hose, textile-reinforced. Specification
BS EN 14015:2004 BS EN 14015:2004. Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
BS ISO 22090-1:2002 BS ISO 22090-1:2002. Ships and marine technology. Transmitting heading devices (THDs). Gyro-compasses
BS EN 13034:2005 BS EN 13034:2005. Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 and type PB [6] equipment)
PAS 78:2006 PAS 78:2006. Guide to good practice in commissioning accessible websites
BS EN 1275:2005 BS EN 1275:2005. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1)
BS EN 1040:2005 BS EN 1040:2005. Chemical disinfectants and antispetics. Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1)
05/30129203 DC 05/30129203 DC. ISO DIS 12575-1. Thermal insulation. Exterior insulating systems for foundations. Part 1. Specification
BS ISO 15790:2004 BS ISO 15790:2004. Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
DD IEC/TS 62325-502:2005 DD IEC/TS 62325-502:2005. Framework for energy market communications. Profile of ebXML
PD IEC/TR 62325-501:2005 PD IEC/TR 62325-501:2005. Framework for energy market communications. General guidelines for use of ebXML
PD IEC/TR 62325-102:2005 PD IEC/TR 62325-102:2005. Framework for energy market communications. Energy market model example
BS IEC 62265:2005 BS IEC 62265:2005. Advanced library format (ALF) describing integrated circuit (IC) technology, cells and blocks
PD IEC/TR 62325-101:2005 PD IEC/TR 62325-101:2005. Framework for energy market communications. General guidelines
BS IEC 62243:2005 BS IEC 62243:2005. Artificial intelligence exchange and service tie to all test environments (AI-ESTATE)
BS ISO 23603:2005 BS ISO 23603:2005. Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour
BS EN 12312-18:2005 BS EN 12312-18:2005. Aircraft ground support equipment. Specific requirements. Nitrogen or oxygen units
BS EN 1504-1:2005 BS EN 1504-1:2005. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Definitions
BS EN 480-12:2005 BS EN 480-12:2005. Admixtures for concrete, mortar and grout. Test methods. Determination of the alkali content of admixtures
BS EN 480-11:2005 BS EN 480-11:2005. Admixtures for concrete, mortar and grout. Test methods. Determination of air void characteristics in hardened concrete
BS EN 480-6:2005 BS EN 480-6:2005. Admixtures for concrete, mortar and grout. Test methods. Infrared analysis
BS EN 480-5:2005 BS EN 480-5:2005. Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption
BS EN 480-4:2005 BS EN 480-4:2005. Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete
05/30129072 DC 05/30129072 DC. ISO 3923-1. Metallic powders. Determination of apparent density. Part 1. Funnel method
BS EN 12940:2004 BS EN 12940:2004. Footwear manufacturing wastes. Waste classification and management
BS EN 62025-2:2005 BS EN 62025-2:2005. High frequency inductive components. Non-electrical characteristics and measuring methods. Test methods for non-electrical characteristics
BS EN 60947-1:2004 BS EN 60947-1:2004. Specification for low-voltage switchgear and controlgear. General rules
BS EN 61499-2:2005 BS EN 61499-2:2005. Function blocks. Software tools requirements
BS EN 12896:2006 BS EN 12896:2006. Road transport and traffic telematics. Public transport. Reference data model
BS ISO 15239:2005 BS ISO 15239:2005. Solid mineral fuels. Evaluation of the measurement performance of on-line analysers
BS EN 61499-1:2005 BS EN 61499-1:2005. Function blocks. Architecture
05/30128969 DC 05/30128969 DC. EN 50377-4-4. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 4-4. Type SC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre
05/30128960 DC 05/30128960 DC. EN 50377-4-1. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 4-1. Type SC-PC duplex terminated on IEC 60793-2 category A 1 a and A l b multimode fibre
BS EN ISO 14644-3:2005 BS EN ISO 14644-3:2005. Cleanrooms and associated controlled environments. Test methods
BS EN ISO 9300:2005 BS EN ISO 9300:2005. Measurement of gas flow by means of critical flow Venturi nozzles
BS EN 60297-3-101:2004 BS EN 60297-3-101:2004. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Subracks and associated plug-in units
BS EN 1034-2:2005 BS EN 1034-2:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Barking drums
ISO/TS10303 : 2004 APP MODULES ISO/TS10303 : 2004 APP MODULES . ISO/TS10303 Application Modules : 2004 Industrial automation systems and integration - Product data representation and exchange Application modules
BS EN 3841-511:2004 BS EN 3841-511:2004. Aerospace series. Circuit breakers. Test methods. Combined test: temperature, altitude and vibration
BS EN 3841-510:2004 BS EN 3841-510:2004. Aerospace series. Circuit breakers. Test methods. Strength of signal contact terminals
BS EN 3841-509:2004 BS EN 3841-509:2004. Aerospace series. Circuit breakers. Test methods. Insertion and extraction forces of signal contact terminals
BS EN 3841-508:2004 BS EN 3841-508:2004. Aerospace series. Circuit breakers. Test methods. Centrifugal acceleration
BS EN 3841-507:2004 BS EN 3841-507:2004. Aerospace series. Circuit breakers. Test methods. Mechanical shocks
BS EN 3841-506:2004 BS EN 3841-506:2004. Aerospace series. Circuit breakers. Test methods. Vibration performance
BS EN 3841-505:2004 BS EN 3841-505:2004. Aerospace series. Circuit breakers. Test methods. Strength of main terminals
BS EN 3841-504:2004 BS EN 3841-504:2004. Aerospace series. Circuit breakers. Test methods. Strength of mounting elements
BS EN 3841-503:2004 BS EN 3841-503:2004. Aerospace series. Circuit breakers. Test methods. Strength of actuating components
BS EN 3841-501:2004 BS EN 3841-501:2004. Aerospace series. Circuit breakers. Test methods. Actuator button travel
BS EN 3841-407:2004 BS EN 3841-407:2004. Aerospace series. Circuit breakers. Test methods. Temperature variation
BS EN 3841-406:2004 BS EN 3841-406:2004. Aerospace series. Circuit breakers. Test methods. Flammability
BS EN 3841-405:2004 BS EN 3841-405:2004. Aerospace series. Circuit breakers. Test methods. Fluid resistance
BS EN 3841-404:2004 BS EN 3841-404:2004. Aerospace series. Circuit breakers. Test methods. Explosion proofness
BS EN 3841-402:2004 BS EN 3841-402:2004. Aerospace series. Circuit breakers. Test methods. Corrosion
BS EN 3841-401:2004 BS EN 3841-401:2004. Aerospace series. Circuit breakers. Test methods. Sand and dust
BS EN 3841-308:2004 BS EN 3841-308:2004. Aerospace series. Circuit breakers. Test methods. Lightning
BS EN 3841-307:2004 BS EN 3841-307:2004. Aerospace series. Circuit breakers. Test methods. Performance with a locked tripping system
BS EN 3841-306:2004 BS EN 3841-306:2004. Aerospace series. Circuit breakers. Test methods. Service life
BS EN 3841-305:2004 BS EN 3841-305:2004. Aerospace series. Circuit breakers. Test methods. Short-circuit performance
BS EN 3841-304:2004 BS EN 3841-304:2004. Aerospace series. Circuit breakers. Test methods. Tripping points
BS EN 3841-303:2004 BS EN 3841-303:2004. Aerospace series. Circuit breakers. Test methods. Dielectric strength
BS EN 3841-302:2004 BS EN 3841-302:2004. Aerospace series. Circuit breakers. Test methods. Insulation resistance
BS EN 3841-301:2004 BS EN 3841-301:2004. Aerospace series. Circuit breakers. Test methods. Voltage drop
BS EN 3841-202:2004 BS EN 3841-202:2004. Aerospace series. Circuit breakers. Test methods. Dimensions and masses
BS EN 3841-201:2004 BS EN 3841-201:2004. Aerospace series. Circuit breakers. Test methods. Visual inspection
BS EN 3841-100:2004 BS EN 3841-100:2004. Aerospace series. Circuit breakers. Test methods. General
BS ISO 778:2005 BS ISO 778:2005. Paper, board and pulp. Determination of acid-soluble copper
BS ISO 777:2005 BS ISO 777:2005. Paper, board and pulp. Determination of acid-soluble calcium
BS ISO 779:2005 BS ISO 779:2005. Paper, board and pulp. Determination of acid-soluble iron
05/30128543 DC 05/30128543 DC. IEC 60794-3-11. Optical fibre cables. Part 3-11. Outdoor cables. Duct and directly buried optical telecommunication cables. Detailed specification
PD IEC/TR 62000:2005 PD IEC/TR 62000:2005. Single-mode fibre compatibility guidelines
BIP 2076:2004 BIP 2076:2004. The quality audit for ISO 9001:2000. A practical guide
BIP 2074:2005 BIP 2074:2005. Electrical plugs and wiring and world electricity supplies
05/30128512 DC 05/30128512 DC. IEC 61984 ED.2. Connectors. Safety requirements and tests
CWA 14050-42:2005 CWA 14050-42:2005. Extensions for financial services (XFS) interface specification. Release 3.03. PIN keypad device class interface. Migration from version 3.02 to version 3.03. Programmer's reference
CWA 14050-6:2005 CWA 14050-6:2005. Extensions for financial services (XFS) interface specification. Release 3.03. PIN keypad device class interface. Programmer's reference
BS EN ISO 4073:2005 BS EN ISO 4073:2005. Dental equipment. Items of dental equipment at the working place. Identification system
BS EN ISO 14678:2005 BS EN ISO 14678:2005. Adhesives. Determination of resistance to flow (sagging)
BS IEC 62142:2005 BS IEC 62142:2005. Standard for Verilog register transfer level synthesis
BS IEC 62050:2005 BS IEC 62050:2005. VHDL register transfer level (RTL) synthesis
05/30128302 DC 05/30128302 DC. EN ISO 22476-1. Geotechnical investigation and testing. Field testing. Part 1. Electrical cone and piezocone penetration tests
05/30128254 DC 05/30128254 DC. IEC 60034-27. Rotating electrical machines. Part 27. Partial discharge off-line measurements on the stator winding insulation of rotating machinery
BS ISO 23933:2006 BS ISO 23933:2006. Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification
BS ISO/IEC 15459-4:2006 BS ISO/IEC 15459-4:2006. Information technology. Unique identifiers. Unique item identification for supply chain management
BS ISO/IEC 15459-3:2006 BS ISO/IEC 15459-3:2006. Information technology. Unique identifiers. Common rules for unique identifiers
BS ISO/IEC 15459-2:2006 BS ISO/IEC 15459-2:2006. Information technology. Unique identifiers. Registration procedures
ISO/IEC23001-1 : 2006 EDTN1 ISO/IEC23001-1 : 2006 EDTN1. ISO/IEC23001-1 : 2006 Information technology - MPEG systems technologies. Part 1: Binary MPEG format for XML
BS 4-1:2005 BS 4-1:2005. Structural steel sections. Specification for hot-rolled sections
BS 5655-12:2005 BS 5655-12:2005. Lifts and service lifts. Code of practice for the undertaking of modifications to existing hydraulic lifts
BS 5655-11:2005 BS 5655-11:2005. Lifts and service lifts. Code of practice for the undertaking of modifications to existing electric lifts
BS ISO 8118-2:2006 BS ISO 8118-2:2006. Textile machinery. Weaving machine temples. Full-width temples
BS ISO 8118-1:2006 BS ISO 8118-1:2006. Textile machinery. Weaving machine temples. Temple cylinders
ISO13766 : 2006 EDTN2 ISO13766 : 2006 EDTN2. ISO13766 : 2006 Earth-moving machinery - Electromagnetic compatibility
ISO7240-12 : 2006 EDTN1 ISO7240-12 : 2006 EDTN1. ISO7240-12 : 2006 Fire detection and alarm systems. Part 12: Line type smoke detectors using a transmitting light beam
ISO7240-1 EDTN 2 ISO7240-1 EDTN 2. ISO7240-1 : 2005 Fire detection and alarm systems. Part 1: General and definitions
BS ISO/IEC 10373-2:2006 BS ISO/IEC 10373-2:2006. Identification cards. Test methods. Cards with magnetic stripes
BS ISO/IEC 10373-5:2006 BS ISO/IEC 10373-5:2006. Identification cards. Test methods. Optical memory cards
PD ISO/TR 21730:2005 PD ISO/TR 21730:2005. Health informatics. Use of mobile wireless communication and computing technology in healthcare facilities. Recommendations for the management of unintentional electromagnetic interference with medical devices
BS ISO 11783-8:2006 BS ISO 11783-8:2006. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Power train messages
BS ISO 14853:2005 BS ISO 14853:2005. Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production
BS EN ISO 16472:2006 BS EN ISO 16472:2006. Animal feeding stuffs. Determination of amylase-treated neutral detergent fibre content (aNDF)
PP 8888-1:2005 PP 8888-1:2005. Drawing practice: a guide for schools and colleges to BS 8888:2004. Technical product specification
PAS 71:2005 PAS 71:2005. Vocabulary. Nanoparticles
PD ISO/TR 12350:2004 PD ISO/TR 12350:2004. Road vehicles. Injury risk curves for evaluation of occupant protection in side impact
05/30127789 DC 05/30127789 DC. IEC 60695-2-13 ED.2. Fire hazard testing. Part 2-13. Glowing/hot-wire based test methods. Glow-wire ignitability test method for materials
05/30127785 DC 05/30127785 DC. IEC 60695-2-12 ED.2. Fire hazard testing. Part 2-12. Glowing/hot-wire based test methods. Glow wire flamability test methods for materials
05/30127781 DC 05/30127781 DC. IEC 60695-2-11 ED.2. Fire hazard testing. Part 2-11. Glowing/hot-wire based test methods. Glow wire flamability test methods for end products
BS ISO 6580:2005, BS 6339:2005 BS ISO 6580:2005, BS 6339:2005. General-purpose industrial fans. Circular flanges. Dimensions
BS ISO 13448-1:2005 BS ISO 13448-1:2005. Acceptance sampling procedures based on the allocation of priorities principle (APP). Guidelines for the APP approach
PD EN 14035-20:2005 PD EN 14035-20:2005. Fireworks. Jumping crackers. Specification and test methods
05/30127701 DC 05/30127701 DC. IEC 61753-081-2 ED.1. Fibre optic interconnecting devices and passive components performance standard. Part 081-2. Non connectorised single-mode fibre optic middle-scale 1 x N DWDM devices for category C. Controlled environments
BS EN 13341:2005 BS EN 13341:2005. Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks. Requirements and test methods
BS EN ISO 8619:2004 BS EN ISO 8619:2004. Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate
BS 8470:2006 BS 8470:2006. Secure destruction of confidential material. Code of practice
BS ISO 5952:2005 BS ISO 5952:2005. Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
NA to BS EN 1992-1-2:2004 NA to BS EN 1992-1-2:2004. UK National Annex to Eurocode 2. Design of concrete structures. General rules. Structural fire design
NA to BS EN 1992-1-1:2004 NA to BS EN 1992-1-1:2004. UK National Annex to Eurocode 2. Design of concrete structures. General rules and rules for buildings
05/30127471 DC 05/30127471 DC. EN 1573. Bar code. Multi industry transport label
05/30127465 DC 05/30127465 DC. ISO 21892. International framework for classifying wood products durability based on use classes
BS EN 821-3:2005 BS EN 821-3:2005. Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of specific heat capacity
BS EN 1501-2:2005 BS EN 1501-2:2005. Refuse collection vehicles and associated lifting devices. General requirements and safety requirements. Side loaded refuse collection vehicles.
PD CEN/TR 15123:2005 PD CEN/TR 15123:2005. Design, preparation and application of internal polymer plastering systems
BS EN ISO 16284:2006 BS EN ISO 16284:2006. Ophthalmic optics. Information interchange for ophthalmic optical equipment
ISO23469 : 2005 EDTN1 ISO23469 : 2005 EDTN1. ISO23469 : 2005 Bases for design of structures - Seismic actions for designing geotechnical works
BS EN 14292:2005 BS EN 14292:2005. Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature
PD 5304:2005 PD 5304:2005. Guidance on safe use of machinery
BS EN 62298-4:2005 BS EN 62298-4:2005. TeleWeb application. Hyperteletext profile
BS EN 13796-3:2005 BS EN 13796-3:2005. Safety requirements for cableway installations designed to carry persons. Carriers. Fatigue tests
BS EN 1354:2005 BS EN 1354:2005. Determination of compressive strength of lightweight aggregate concrete with open structure
BS EN 679:2005 BS EN 679:2005. Determination of the compressive strength of autoclaved aerated concrete
BS ISO 16149:2006 BS ISO 16149:2006. Agricultural irrigation equipment. PVC above-ground low-pressure pipe for surface irrigation. Specifications and test methods
BS ISO 20652:2006 BS ISO 20652:2006. Space data and information transfer systems. Producer-archive interface. Methodology abstract standard
BIP 2069:2005 BIP 2069:2005. Managing the environment the 14001 way
BIP 2070:2005 BIP 2070:2005. Environmental management systems presentation set
BIP 3023:2005 BIP 3023:2005. Environmental management systems presentation set CD-ROM
BS EN ISO 14924:2005 BS EN ISO 14924:2005. Thermal spraying. Post-treatment and finishing of thermally sprayed coatings
BS 6001-3:2005 BS 6001-3:2005. Sampling procedures for inspection by attributes. Specification for skip-lot sampling procedures
BS ISO 9947:2005 BS ISO 9947:2005. Textile machinery and accessories. Two-for-one twisters. Vocabulary
BS EN 14531-1:2005 BS EN 14531-1:2005. Railway applications. Methods for calculation of stopping distances, slowing distances and immobilization braking. General algorithms
BS EN 62310-1:2005 BS EN 62310-1:2005. Static transfer systems (STS). General and safety requirements
BS EN ISO 6360-2:2004 BS EN ISO 6360-2:2004. Dentistry. Number coding system for rotary instruments. Shapes
ISO/IEC14496-4 : 2004 EDTN2 ISO/IEC14496-4 : 2004 EDTN2. ISO/IEC14496-4 : 2004 Information technology - Coding of audio-visual objects -. Part 4: Conformance testing -
ISO13910 : 2005 EDTN1 ISO13910 : 2005 EDTN1. ISO13910 : 2005 Structural timber - Characteristic values of strength graded timber - Sampling, full size testing and evaluation
BS 7870-3.50:2005 BS 7870-3.50:2005. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire. (Implementation of HD 603)
BS EN 13501-3:2005 BS EN 13501-3:2005. Fire classification of construction products and building elements. Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
ISO/IEC7816-5 : 2004 EDTN2 ISO/IEC7816-5 : 2004 EDTN2. ISO/IEC 7816-5:2004 Identification cards - Integrated circuit cards -. Part 5: Registration of application providers
ISO14649-10 : 2004 EDTN2 ISO14649-10 : 2004 EDTN2. ISO14649-10 : 2004 Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - . Part 10: General process data
04/30126785 DC 04/30126785 DC. IEC 60335-2-76 AMD 1. F5. ED 2. Household and similar electrical appliances. Safety. Part 2-76. Particular requirements for electric fence energizers
06/30126769 DC 06/30126769 DC. ISO 10303-219. Industrial automation systems and integration. Product data representation and exchange. Part 219. Application protocol. Dimensional inspection information exchange
BS EN 61499-4:2006 BS EN 61499-4:2006. Function blocks. Rules for compliance profiles
06/30126742 DC 06/30126742 DC. IEC 62110. Measurement procedures of electric and magnetic fields generated by AC power systems with regard to human exposure
BS EN ISO 9163:2005 BS EN ISO 9163:2005. Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
04/30126706 DC 04/30126706 DC. ISO/IEC 8802-11 AMD 5. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications. Spectrum and Transmit Power Management Extensions in the 5 GHz band in Europe
04/30126701 DC 04/30126701 DC. ISO/IEC 8802-11 AMD 4. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications. Further Higher Data Rate Extension in the 2.4 GHz Band
BS EN ISO 11816-1:2006 BS EN ISO 11816-1:2006. Milk and milk products. Determination of alkaline phosphatase activity. Fluorimetric method for milk and milk-based drinks
BS EN 60371-2:2004 BS EN 60371-2:2004. Specification for insulating materials based on mica. Methods of test
BS EN 1011-8:2004 BS EN 1011-8:2004. Welding. Recommendations for welding of metallic materials. Welding of cast irons
DD CEN/TS 15105:2005 DD CEN/TS 15105:2005. Solid biofuels. Methods for determination of the water soluble content of chloride, sodium and potassium
DD CEN/TS 15104:2005 DD CEN/TS 15104:2005. Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
DD CEN/TS 15103:2005 DD CEN/TS 15103:2005. Solid biofuels. Methods for the determination of bulk density
DD CEN/TS 14780:2005 DD CEN/TS 14780:2005. Solid biofuels. Methods for sample preparation
DD CEN/TS 14779:2005 DD CEN/TS 14779:2005. Solid biofuels. Sampling. Methods for preparing sampling plans and sampling certificates
DD CEN/TS 14778-2:2005 DD CEN/TS 14778-2:2005. Solid biofuels. Sampling. Methods for sampling particulate material transported in lorries
DD CEN/TS 14778-1:2005 DD CEN/TS 14778-1:2005. Solid biofuels. Sampling. Methods for sampling
BS ISO 2926:2005 BS ISO 2926:2005. Aluminium oxide used for the production of primary aluminium. Particle size analysis for the range 45 μm to 150 μm. Method using electroformed sieves
BS EN 14483-4:2004 BS EN 14483-4:2004. Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
BS EN ISO 15711:2004 BS EN ISO 15711:2004. Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water
DD IEC PAS 61512-3:2004 DD IEC PAS 61512-3:2004. Batch control. General and site recipe models and representation
BS ISO 12640-2:2004 BS ISO 12640-2:2004. Graphic technology. Prepress digital data exchange. XYZ/sRGB encoded standard colour image data (XYZ/SCID)
BSISO12640-2 : 2004 (CD-ROM) BSISO12640-2 : 2004 (CD-ROM).
BS ISO 14560:2004 BS ISO 14560:2004. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
05/30126543 DC 05/30126543 DC. ISO 22875. Nuclear Fuel Technology. Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets
BS EN 2256:2004 BS EN 2256:2004. Aerospace series. Aluminium alloy AL-P2618A-T852. Hand and die forgings. a ≤ 150 mm
BS EN 14571:2005 BS EN 14571:2005. Metallic coatings on nonmetallic basis materials. Measurement of coating thickness. Microresistivity method
BS ISO/IEC 27001:2005/BS 7799-2:2005 BS ISO/IEC 27001:2005/BS 7799-2:2005. Information technology. Security techniques. Information security management systems. Requirements
PD CEN/TR 15119:2005 PD CEN/TR 15119:2005. Durability of wood and wood-based products. Estimation of emissions from preservative treated wood to the environment. Wood held in the storage yard after treatment and wooden commodities exposed in use class 3 (not covered, not in contact with the ground), and wooden commodities exposed in use class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method
BS EN 862:2005 BS EN 862:2005. Packaging. Child resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
PD CEN/TR 1749:2005 PD CEN/TR 1749:2005. European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CWA 15155:2004 CWA 15155:2004. Adaptation of SIF (schools interoperability framework) data model for a European context
CWA 15143:2004 CWA 15143:2004. European econstruction software implementation toolset (EeS)
CWA 15142:2004 CWA 15142:2004. European econstruction ontology (EeO)
CWA 15141:2004 CWA 15141:2004. European econstruction meta-schema (EeM)
CWA 15145:2004 CWA 15145:2004. Automotive fuels. Water in diesel fuel emulsions for use in internal combustion engines. Requirements and test methods
DD 8464:2005 DD 8464:2005. Estate agency services. Residential property sales. Specification for the provision of the service
ISO18629-1 : 2004(R08) EDTN1 ISO18629-1 : 2004(R08) EDTN1. ISO18629-1 : 2004 Industrial automation systems and integration - Process specification language -. Part 1: Overview and basic principles
BS ISO/IEC TR 18047-4:2004 BS ISO/IEC TR 18047-4:2004. Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 2,45 GHz
ISO/IEC14496-1 : 2004 EDTN3 ISO/IEC14496-1 : 2004 EDTN3. ISO/IEC14496-1 : 2004 Information technology - Coding of audio-visual objects -. Part 1 : Systems
06/30126267 DC 06/30126267 DC. ISO 22915-4. Industrial trucks. Verification of stability. Part 4. Pallet stackers, double stackers and order picking trucks up to and including 1200 mm lift height
BS EN 1022:2005 BS EN 1022:2005. Domestic furniture. Seating. Determination of stability
BS ISO/IEC 20000-2:2005 BS ISO/IEC 20000-2:2005. Information technology. Service management. Code of practice
BS ISO/IEC 20000-1:2005 BS ISO/IEC 20000-1:2005. Information technology. Service management. Specification
ISO/IEC24700 : 2005 EDTN1 ISO/IEC24700 : 2005 EDTN1. ISO/IEC24700 : 2005 Quality and performance of office equipment that contains reused components
04/30126211 DC 04/30126211 DC. ISO/IEC 18051 ED.3. Information technology. Telecommunications and information exchange between systems. Services for Computer Supported Telecommunications Applications (CSTA) Phase III
04/30126138 DC 04/30126138 DC. EN 15100-2. Thermal insulating products for buildings. In-situ formed ureaformaldehyde foam (UF) products. Part 2. Specification for the installed insulation products
04/30126133 DC 04/30126133 DC. EN 15100-1. Thermal insulating products for buildings. In-situ formed ureaformaldehyde foam (UF) products. Part 1. Specification for the foam system before installation
BS 8460:2005 BS 8460:2005. Safe use of MEWPs. Code of practice
DD CEN/TS 15111:2005 DD CEN/TS 15111:2005. Foodstuffs. Determination of trace elements. Determination of iodine in dietetic foods by ICP-MS (inductively coupled plasma mass spectrometry)
DD ISO/TS 21098:2005 DD ISO/TS 21098:2005. Foodstuffs. Nucleic acid based methods of analysis of genetically modified organisms and derived products. Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 and ISO 21571
BS ISO 11929-7:2005 BS ISO 11929-7:2005. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and general applications
BS ISO 11929-6:2005 BS ISO 11929-6:2005. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and applications to measurements by use of transient mode
BS ISO 11929-5:2005 BS ISO 11929-5:2005. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
DD CEN/TS 14775:2004 DD CEN/TS 14775:2004. Solid biofuels. Method for the determination of ash content
BS 5502-11:2005 BS 5502-11:2005. Buildings and structures for agriculture. Guide to regulations and sources of information
BS EN 50156-1:2004 BS EN 50156-1:2004. Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
BS EN 60567:2005 BS EN 60567:2005. Oil-filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance
DD CEN/TS 14961:2005 DD CEN/TS 14961:2005. Solid biofuels. Fuel specifications and classes
04/30125968 DC 04/30125968 DC. ISO 18896. Footwear. Test methods for shanks. Longitudinal stiffness
BS EN 14347:2005 BS EN 14347:2005. Chemical disinfectants and antiseptics. Basic sporicidal activity. Test method and requirements (phase 1, step 1)
BS ISO 12488-4:2004 BS ISO 12488-4:2004. Cranes. Tolerances for wheels and travel and traversing tracks. Jib cranes
BS ISO 727-2:2005 BS ISO 727-2:2005. Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure. Inch-based series
PD CEN/TR 13387:2004 PD CEN/TR 13387:2004. Child use and care articles. Safety guidelines
DD IEC/PAS 62050:2004 DD IEC/PAS 62050:2004. Board level drop test method of components for handheld electronicproduc ts
BS EN 10226-3:2005 BS EN 10226-3:2005. Pipe threads where pressure-tight joints are made on the threads. Verification by means of limit gauges
BS 5502-40:2005 BS 5502-40:2005. Buildings and structures for agriculture. Code of practice for design and construction of cattle buildings
BS EN 10342:2005 BS EN 10342:2005. Magnetic materials. Classification of surface insulations of electrical steel sheet, strip and laminations
BS EN 14444:2005 BS EN 14444:2005. Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test
BS EN 14024:2004 BS EN 14024:2004. Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment
04/30125709 DC 04/30125709 DC. ISO 24432. Ships and marine technology. Thermal protective aids with sleeves
BS EN 14979:2006 BS EN 14979:2006. Packaging. Flexible plastic/metal laminate tubes. Dimensions and tolerances of nozzle S 13
BS ISO 129-1:2004 BS ISO 129-1:2004. Technical drawings. Indication of dimensions and tolerances. General principles
BS EN 15088:2005 BS EN 15088:2005. Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery
06/30125679 DC 06/30125679 DC. ISO 22765. Sintered (U, Pu) O2 pellets. Guidance for ceramographic preparation for microstructure examination
BS 0-2:2005 BS 0-2:2005. A standard for standards. Structure and drafting. Requirements and guidance
BS EN 14258:2004 BS EN 14258:2004. Structural adhesives. Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
BIP 0062:2004 BIP 0062:2004. IT Service Management Collection on CD-ROM
DD CEN/TS 14773:2004 DD CEN/TS 14773:2004. Postal services. Quality of service. Measurement of loss and substantial delay of priority and first class single piece mail using a survey of test letters
04/30125642 DC 04/30125642 DC. IEC 61643-12 Ed.2. Low-voltage surge protective devices. Part 12. Surge protective devices connected to low-voltage power distribution systems. Selection and application principles
PD EN 14035-18:2004 PD EN 14035-18:2004. Fireworks. Hand-held fountains. Specification and test methods
BS ISO 17734-2:2006 BS ISO 17734-2:2006. Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives
BS ISO 17734-1:2006 BS ISO 17734-1:2006. Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Isocyanates using dibutylamine derivatives
BS 5400-5:2005 BS 5400-5:2005. Steel, concrete and composite bridges. Code of practice for design of composite bridges
04/30125580 DC 04/30125580 DC. IEC 60335-2-107. Household and similar electrical appliances. Safety. Part 2-107. Particular requirements for robotic battery powered electrical lawn mowers
04/30125576 DC 04/30125576 DC. IEC 60335-2-94 AMD 1. Household and similar electrical appliances. Safety. Part 2-94. Particular requirements for scissors type grass shears
04/30125572 DC 04/30125572 DC. IEC 60335-2-91 AMD 1. Household and similar electrical appliances. Safety. Part 2-91. Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
04/30125537 DC 04/30125537 DC. IEC 60730-1 Ed.4. Automatic electrical controls for household and similar use. Part 1. General requirements
BS 4551:2005 BS 4551:2005. Mortar. Methods of test for mortar. Chemical analysis and physical testing
04/30125486 DC 04/30125486 DC. IEC 60745-2-16 AMD 1. Hand-held motor-operated electric tools. Safety. Part 2-16. Particular requirements for tackers
06/30125441 DC 06/30125441 DC. ISO 9278. Uranium dioxide pellets. Determination of density and amount of open and closed porosity. Boiling water method and penetration immersion method
BS EN 14430:2004 BS EN 14430:2004. Vitreous and porcelain enamels. High voltage test
PD CEN/TR 15046:2005 PD CEN/TR 15046:2005. Wood preservatives. Artificial weathering of treated wood prior to biological testing. UV-radiation and water-spraying procedure
BS EN 14517:2004, BS 2000-526:2004 BS EN 14517:2004, BS 2000-526:2004. Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method
BSIEC61691-5 : 2004 (COVERS) BSIEC61691-5 : 2004 (COVERS).
BSIEC61691-5 : 2004 (CD ROM) BSIEC61691-5 : 2004 (CD ROM).
BSIEC61691-1-1 : 2004 (COVERS) BSIEC61691-1-1 : 2004 (COVERS).
BSIEC61691-1-1 : 2004 (CD-ROM) BSIEC61691-1-1 : 2004 (CD-ROM).
BSIEC61691-4 : 2004 (COVERS) BSIEC61691-4 : 2004 (COVERS).
BSIEC61691-4 : 2004 (CD ROM) BSIEC61691-4 : 2004 (CD ROM).
BS EN ISO 8502-5:2004, 7079-B5:2004 BS EN ISO 8502-5:2004, 7079-B5:2004. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
BS ISO 11873:2005 BS ISO 11873:2005. Hardmetals. Determination of sulfur and carbon contents in cobalt metal powders. Infrared detection method
BS EN 14458:2004 BS EN 14458:2004. Personal eye-equipment. Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency services
BS ISO/IEC 15909-1:2004 BS ISO/IEC 15909-1:2004. Software and system engineering. High-level Petri nets. Concepts, definitions and graphical notation
BS ISO 15838:2003 BS ISO 15838:2003. Ships and marine technology. Fittings for use with gasketed mechanical couplings used in piping applications. Performance specification.
BS EN 15086:2006 BS EN 15086:2006. Foodstuffs. Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs
BS 7799-3:2006 BS 7799-3:2006. Information security management systems. Guidelines for information security risk management
PD 5500:2006+A3:2008 PD 5500:2006+A3:2008. Specification for unfired fusion welded pressure vessels
04/30124987 DC 04/30124987 DC. EN 1090-1. Steel and aluminium structural components. Part 1. General delivery conditions
06/30124959 DC 06/30124959 DC. ISO 21483. Determination of solubility in nitric acid of Plutonium in unirradiated mixed-oxide fuel pellets (U, Pu) O2
BS EN ISO 15732:2005 BS EN ISO 15732:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
BS EN 1333:2006 BS EN 1333:2006. Flanges and their joints. Pipework components. Definition and selection of PN
BS EN 118:2005 BS EN 118:2005. Wood preservatives. Determination of preventive action against Reticulitermes species (European termites) (laboratory method)
PD CEN/TR 13200-2:2005 PD CEN/TR 13200-2:2005. Spectator facilities. Layout criteria of service area. Characteristics and national situations
BS EN 117:2005 BS EN 117:2005. Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (laboratory method)
BS EN ISO 11343:2005 BS EN ISO 11343:2005. Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method
DD CEN/TS 15087:2005 DD CEN/TS 15087:2005. Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing. Test method for mechanical fasteners
BS EN ISO 11339:2005 BS EN ISO 11339:2005. Adhesives. T-peel test for flexible-to-flexible bonded assemblies
BSEN61158-6 : 2004 (COVERS) BSEN61158-6 : 2004 (COVERS). Digital data communications for measurement and control. Fieldbus for use in industrial control systems
BSEN61158-6 : 2004 (CD-ROM) BSEN61158-6 : 2004 (CD-ROM).
BS ISO 16874:2004 BS ISO 16874:2004. Hydraulic fluid power. Identification of manifold assemblies and their components
BS ISO 14743:2004 BS ISO 14743:2004. Pneumatic fluid power. Push-in connectors for thermoplastic tubes
BS EN 685:2005 BS EN 685:2005. Resilient, textile and laminate floor coverings. Classification
BS ISO/IEC 15434:2005 BS ISO/IEC 15434:2005. Information technology. Syntax for high-capacity automatic data capture (ADC) media
BS 5266-1:2005 BS 5266-1:2005. Emergency lighting. Code of practice for the emergency lighting of premises
04/30124829 DC 04/30124829 DC. EN 15070. Strip wound flexible safety metallic hose assemblies for the connection of domestic appliances using gaseous fuels
PAS 65:2004 PAS 65:2004. Management of public swimming pools. General management. Code of practice
BS EN ISO 13500:2006 BS EN ISO 13500:2006. Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
BIP 0038:2006 BIP 0038:2006. Achieving ISO/IEC 20000. Integrated service management
BIP 0037:2006 BIP 0037:2006. Achieving ISO/IEC 20000. Capacity management
BIP 0036:2006 BIP 0036:2006. Achieving ISO/IEC 20000. Keeping the service going
BIP 0035:2006 BIP 0035:2006. Achieving ISO/IEC 20000. Enabling change
BIP 0034:2005 BIP 0034:2005. Achieving BS 15000. Finance for service managers
BIP 0033:2005 BIP 0033:2005. Achieving BS 15000. Managing end-to-end service
BIP 0032:2005 BIP 0032:2005. Achieving BS 15000. Making metrics work
BIP 0031:2005 BIP 0031:2005. Achieving BS 15000. Why people matter
BIP 0030:2004 BIP 0030:2004. Achieving BS 15000. Management decisions
06/30124648 DC 06/30124648 DC. ISO 15366. Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic-dilution analysis by solvent extraction chromatography
BS EN 12873-2:2005 BS EN 12873-2:2005. Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and non-cementitious site-applied materials
05/30124598 DC 05/30124598 DC. EN 1094-9. Insulating refractory products. Part 9. Methods of test for alkaline earth silicate (AES) wool products
05/30124595 DC 05/30124595 DC. EN 1094-8. Insulating refractory products. Part 8. Terminology for alkaline earth silicate (AES) wool products
05/30124589 DC 05/30124589 DC. EN 1094-7. Insulating refractory products. Part 7. Methods of test for ceramic fibre products
04/30124515 DC 04/30124515 DC. EN 1366-10. Fire resistance tests for service installations. Part 10. Smoke control dampers
04/30124508 DC 04/30124508 DC. EN 15080-12. Extended application of results from fire resistance tests. Part 12. Penetration seals
04/30124505 DC 04/30124505 DC. EN 15080-8. Extended application of results from fire resistance tests. Part 8. Beams
BS EN ISO 9936:2006 BS EN ISO 9936:2006. Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
BS EN 60519-9:2005 BS EN 60519-9:2005. Safety in electroheat installations. Particular requirements for high-frequency dielectric heating installations
BS EN 12845:2004 BS EN 12845:2004. Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance
PD ISO/TR 19319:2003 PD ISO/TR 19319:2003. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Determination of lateral resolution, analysis area, and sample area viewed by the analyser
BS ISO 17331:2004 BS ISO 17331:2004. Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
BS ISO 15471:2004 BS ISO 15471:2004. Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
BS ISO 15470:2004 BS ISO 15470:2004. Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
BS EN 14185-2:2006 BS EN 14185-2:2006. Non fatty foods. Determination of N-methylcarbamate residues. HPLC method with clean-up on a diatomaceous earth column
04/30124343 DC 04/30124343 DC. EN 13562-2. Fixed firefighting systems. Foam systems. Part 2. Design, construction and maintenance
04/30124310 DC 04/30124310 DC. ISO/IEC 24824-2. Information technology. Generic applications of ASN 1. Part 2. Fast web services
BS EN 1256:2006 BS EN 1256:2006. Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes
BS EN ISO 19957:2004 BS EN ISO 19957:2004. Footwear. Test methods for heels. Heel pin holding strength
CWA 14174-8:2004 Version 2 CWA 14174-8:2004 Version 2. Financial transactional IC card reader (FINREAD). Client application programming interfaces (APIs)
CWA 14174-7:2004 Version 2 CWA 14174-7:2004 Version 2. Financial transactional IC card reader (FINREAD). Card reader application programming interfaces (APIs)
CWA 14174-5:2004 Version 2 CWA 14174-5:2004 Version 2. Financial transactional IC card reader (FINREAD). Download file format
CWA 14174-3:2004 Version 2 CWA 14174-3:2004 Version 2. Financial transactional IC card reader (FINREAD). Security requirements
CWA 14174-2:2004 Version 2 CWA 14174-2:2004 Version 2. Financial transactional IC card reader ( FINREAD). Functional requirements
BS ISO 5538:2004 BS ISO 5538:2004. Milk and milk products. Sampling. Inspection by attributes
BS IEC 62138:2004 BS IEC 62138:2004. Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions
BS EN 1894:2005 BS EN 1894:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens
BS EN 1893:2005 BS EN 1893:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties
BS EN 1892:2005 BS EN 1892:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties
04/30124208 DC 04/30124208 DC. IEC 60730-1 ED.4. Automatic electrical controls for household and similar use. Part 1. General requirements
PD 5482-3:2005 PD 5482-3:2005. Code of practice for domestic butane and propane gas-burning installations. Installations in boats, yachts and other vessels
BSENISO10423 : 2004 (COVERS) BSENISO10423 : 2004 (COVERS). Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BSENISO10423 : 2004 (CD-ROM) BSENISO10423 : 2004 (CD-ROM). Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BS IEC 61691-1-1:2004 BS IEC 61691-1-1:2004. Behavioural languages. VHDL language reference manual
BS EN ISO 6497:2005 BS EN ISO 6497:2005. Animal feeding stuffs. Sampling
BS EN 50411-2-4:2006 BS EN 50411-2-4:2006. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed dome fibre splice closures type 1, for category S & A
04/30124126 DC 04/30124126 DC. IEC 61076-2-104 ED.1. Connectors for electronic equipment. Part 2-104. Circular connectors. Detail specification for M8 connectors with screw or snap-locking for low voltage applications
04/30124122 DC 04/30124122 DC. IEC 61076-2-101 ED.2. Connectors for electronic equipment. Part 2-101. Circular connectors. Detail specification for M12 connectors with screw-locking for low voltage applications
05/30124119 DC 05/30124119 DC. ISO 15338. Surface chemical analysis. Glow discharge mass spectrometry (GD-MS). Introduction to use
04/30124031 DC 04/30124031 DC. IEC 61300-3-35 ED 1.0. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-35. Examinations and measurements. Fibre optic cylindrical connector endface visual and automated inspection
BS EN 61337-2:2004 BS EN 61337-2:2004. Filters using waveguide type dielectric resonators. Guide for use
04/30124011 DC 04/30124011 DC. EN 15052. Resilient, textile and laminate floor coverings. Evaluation and requirements of volatile organic compounds (VOC) emissions
04/30123989 DC 04/30123989 DC. IEC 61643-11. Surge protection devices connected to low-voltage power distribution systems. Part 11. Performance requirements and testing methods
04/30123986 DC 04/30123986 DC. EN 50216-9. Power transformer and reactor fittings. Part 9. Oil to water heat exchanger
PD CEN/TR 15018:2004 PD CEN/TR 15018:2004. Characterization of waste. Digestion of waste samples using alkali-fusion techniques
BS EN 61221:2004 BS EN 61221:2004. Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
04/30123913 DC 04/30123913 DC. EN 13307-2. Timber blanks and semi-finished profiles for non-structural uses. Part 2. Production control
KIT 154 KIT 154. Electric cables. PVC-insulated non-armoured cables kit
ISO10508 : 2006 EDTN 2 ISO10508 : 2006 EDTN 2. ISO10508 : 2006 Plastics piping systems for hot and cold water installations -Guidance f or classification and design
BS ISO 7876-5:2004 BS ISO 7876-5:2004. Fuel injection equipment. Vocabulary. Common rail fuel injection systems
04/30123843 DC 04/30123843 DC. IEC 60061-1 AMD 36. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Part 2. Lampholders. Part 3. Gauges
05/30123804 DC 05/30123804 DC. EN ISO 22477-1. Geotechnical investigation and testing. Testing of geotechnical structures. Part 1. Pile load test by static axially loaded compression
BS EN 61000-4-11:2004 BS EN 61000-4-11:2004. Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
05/30123744 DC 05/30123744 DC. EN ISO 22476-7. Geotechnical investigation and testing. Field testing. Part 7. Borehole jack test
05/30123736 DC 05/30123736 DC. EN ISO 22476-5. Geotechnical investigation and testing. Field testing. Part 5. Flexible dilatometer test
05/30123732 DC 05/30123732 DC. EN ISO 22476-4. Geotechnical investigation and testing. Field testing. Part 4. Menard pressuremeter test
BS ISO 7341:2005 BS ISO 7341:2005. Banking. Nostro accounts reconciliation
KIT 160 KIT 160. Medical devices kit
KIT 159 KIT 159. Steel tubes technical delivery conditions kit
KIT 158 KIT 158. Control circuit devices and switching elements kit
KIT 157 KIT 157. Preparation and presentation of product specifications. (Supplement to KIT 112 - Design management kit)
KIT 156 KIT 156. Welding metallic materials kit
KIT 155 KIT 155. Conduit systems for cable management kit
KIT 153 KIT 153. Domestic cooking appliances safety kit
KIT 152 KIT 152. Biotechnology. Performance criteria for piping and instrumentation kit
KIT 151 KIT 151. Biotechnology. Performance criteria for vessels kit
KIT 150 KIT 150. Electromagnetic fields pack
KIT 149 KIT 149. Aluminium & aluminium alloys. Chemical composition and mechanical properties kit
PD IEC/TR 62010:2005 PD IEC/TR 62010:2005. Analyser systems. Guide to maintenance management
BS EN 15062:2006 BS EN 15062:2006. Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
BS EN 12779:2004 BS EN 12779:2004. Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety related performances and safety requirements
BS EN 12387:2005 BS EN 12387:2005. Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
BS EN 14965:2005 BS EN 14965:2005. Inland navigation vessels. Flat bollards
BS EN 61249-2-22:2005 BS EN 61249-2-22:2005. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
04/30123396 DC 04/30123396 DC. ISO 6279. Plain bearings. Aluminium alloys for solid bearings
BS EN 13121-4:2005 BS EN 13121-4:2005. GRP tanks and vessels for use above ground. Delivery, installation and maintenance
BS EN 15051:2006 BS EN 15051:2006. Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods
BS ISO 15202-3:2004 BS ISO 15202-3:2004. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Analysis
04/30123351 DC 04/30123351 DC. IEC 61439-2. Low voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies
04/30123347 DC 04/30123347 DC. IEC 61439-1. Low voltage switchgear and controlgear assemblies. Part 1. General rules
ISO/IEC14165-241 : 2005 EDTN 1 ISO/IEC14165-241 : 2005 EDTN 1. ISO/IEC14165-241 : 2005 Information technology - Fibre Channel. Part 241: Backbone 2 (FC-BB-2)
ISO/IEC14165-116 : 2005 EDTN1 ISO/IEC14165-116 : 2005 EDTN1. ISO/IEC14165-116 : 2005 Information technology - Fibre channel. Part 116: 10 Gigabit (10GFC)
BS IEC 60747-8-4:2004 BS IEC 60747-8-4:2004. Discrete semiconductor devices. Metal-oxide semiconductor field-effect transistors (MOSFETs) for power switching applications
BS EN 12014-4:2005 BS EN 12014-4:2005. Foodstuffs. Determination of nitrate and/or nitrite content. Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of meat products
BS EN 12014-3:2005 BS EN 12014-3:2005. Foodstuffs. Determination of nitrate and/or nitrite content. Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite
04/30123285 DC 04/30123285 DC. BS 1991-1-2. Actions on structures. Part 1-2. General actions on structures exposed to fire
BIP 0050:2004 BIP 0050:2004. Data Protection Pocket Guide. Essential facts at your fingertips
BIP 3016:2004 BIP 3016:2004. BS 8888:2004 Technical Product Specification CD-ROM
ISO/TR16570 : 2004 (EDTN1) HEADER ISO/TR16570 : 2004 (EDTN1) HEADER. ISO/TR16570 : 2004 Geometric product specifications - linear and angular dimensioning and tolerancing, +/- limit specifications - Step dimensions, distances, angular sizes and radii.
NSSF IPR NSSF IPR. Standards and Intellectual Property Rights
BS ISO 4141-1:2005 BS ISO 4141-1:2005. Road vehicles. Multi-core connecting cables. Test methods and requirements for basic performance sheathed cables
BS EN 14982:2006 BS EN 14982:2006. Plastics piping systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
ISO/IECTR19797 : 2004 EDTN 1 ISO/IECTR19797 : 2004 EDTN 1. ISO/IECTR19797 : 2004 Information technology - Office machines - Device output of 16 colour scales, output linearization method (LM) and specification of the reproduction properties
ISO/IEC14776-452 : 2005 EDTN 1 ISO/IEC14776-452 : 2005 EDTN 1. ISO/IEC14776-452 : 2005 Information technology -- Small Computer System Interface (SCSI). Part 452: SCSI Primary Commands - 2 (SPC-2)
BS ISO 20805:2005 BS ISO 20805:2005. Hot-rolled sheet steel in coils of higher yield strength with improved formability and heavy thickness for cold forming
BS EN 362:2004 BS EN 362:2004. Personal protective equipment against falls from a height. Connectors
BS ISO 13448-2:2004 BS ISO 13448-2:2004. Acceptance sampling procedures based on the allocation of priorities principles (APP). Coordinated single sampling plans for acceptance sampling by attributes
BS ISO 7372:2005 BS ISO 7372:2005. Trade data interchange. Trade data elements directory
BS ISO 20433:2005 BS ISO 20433:2005. Leather. Tests for colour fastness. Colour fastness to crocking
05/30122919 DC 05/30122919 DC. IEC 62223. Insulators. Glossary of terms
BS ISO 17228:2005 BS ISO 17228:2005. Leather. Tests for colour fastness. Change in colour with accelerated ageing
BS EN ISO 10618:2004 BS EN ISO 10618:2004. Carbon fibre. Determination of tensile properties of resin-impregnated yarn
BS EN 13575:2004 BS EN 13575:2004. Thermoplastics tanks made from blow or rotational moulded polyethylene. Tanks for the above ground storage of chemicals. Requirements and test methods
BS EN 13042-2:2004 BS EN 13042-2:2004. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Handling machines for feeding
04/30122823 DC 04/30122823 DC. IEC 60751. Industrial platinum resistance thermometer sensors
KIT 148 KIT 148. Surface texture standards kit
04/30122804 DC 04/30122804 DC. EN 15037-2. Precast concrete products. Beam and block floor systems. Part 2. Blocks
BS 7958:2005 BS 7958:2005. Closed-circuit television (CCTV). Management and operation. Code of practice
BS ISO 6966-1:2005 BS ISO 6966-1:2005. Aircraft ground equipment. Basic requirements. General design requirements
BS ISO 6966-2:2005 BS ISO 6966-2:2005. Aircraft ground equipment. Basic requirements. Safety requirements
BS EN 13457:2004 BS EN 13457:2004. Footwear, leather and imitation leather goods manufacturing machines. Splitting, skiving, cutting, cementing and cement drying machines. Safety requirements
DD CEN/TS 14966:2005 DD CEN/TS 14966:2005. Wood-based panels. Small scale indicative test methods for certain mechanical properties
BS ISO 13990-3:2006 BS ISO 13990-3:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machines. Dimensions for connecting and interconnection cables
BS ISO 13990-2:2006 BS ISO 13990-2:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machines. Connecting dimensions for yarn feeders and yarn control devices
BS ISO 13990-1:2006 BS ISO 13990-1:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machines. Vocabulary
BIP 2039 (QMS Boxed Set) BIP 2039 (QMS Boxed Set). Quality management. Achieving registration
BS EN ISO 10650-1:2005 BS EN ISO 10650-1:2005. Dentistry. Powered polymerization activators. Quartz tungsten halogen lamps
BS EN 45510-2-8:2004 BS EN 45510-2-8:2004. Guide for procurement of power station equipment. Electrical equipment. Power cables
BS EN 14035-35:2004 BS EN 14035-35:2004. Fireworks. Throwdowns. Specification and test methods
KIT 146 KIT 146. Graphical symbols kit (BS 5499)
KIT 147 KIT 147. Graphical symbols kit (BS 5499 and CD-ROM)
BS EN 60526:2004 BS EN 60526:2004. High-voltage cable plug and socket connections for medical X-ray equipment
04/30122507 DC 04/30122507 DC. BS EN 50377-12-1. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 12-1. Type SC-PC and SC-APC fan-out using IEC 60793-2 category B1.1 singlemode fibre
05/30122498 DC 05/30122498 DC. IEC 62153-4-0. Metallic communication cable test methods. Part 4-0. Electro magnetic compatibility (EMC). Relationship between surface transfer impedance and screening attenuation, recommended limits
ISO17228 : 2005 ( HEADER) EDTN1 ISO17228 : 2005 ( HEADER) EDTN1. ISO17228 : 2005 Leather - Tests for colour fastness - Change in colour with accelerated ageing
ISO20433 : 2005 EDTN1 ISO20433 : 2005 EDTN1. ISO20433 : 2005 Leather - Tests for colour fastness - Colour fastness to crocking
DD ISO/TS 13399-100:2004 DD ISO/TS 13399-100:2004. Cutting tool data representation and exchange. Definitions, principles and methods for reference dictionaries
BS ISO/IEC 15961:2004 BS ISO/IEC 15961:2004. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Application interface
BS ISO 11723:2004 BS ISO 11723:2004. Solid mineral fuels. Determination of arsenic and selenium. Eschka's mixture and hydride generation method
BS ISO 12637-1:2006 BS ISO 12637-1:2006. Graphic technology. Vocabulary. Fundamental terms
BS EN 12697-4:2005 BS EN 12697-4:2005. Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Fractionating column
BS EN 12697-3:2005 BS EN 12697-3:2005. Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Rotary evaporator
DD CEN/TS 1071-8:2004 DD CEN/TS 1071-8:2004. Advanced technical ceramics. Methods of text for ceramic coatings. Rockwell indentation test for evaluation of adhesion
ISO10218-1 : 2006 EDTN1 ISO10218-1 : 2006 EDTN1. ISO10218-1 : 2006 Robots for industrial environments - Safety requirements -. Part 1: Robot
BS EN ISO 5269-2:2004 BS EN ISO 5269-2:2004. Pulps. Preparation of laboratory sheets for physical testing. Rapid-Koethen method
BS EN ISO 5269-1:2005 BS EN ISO 5269-1:2005. Pulps. Preparation of laboratory sheets for physical testing. Conventional sheet-former method
DD CEN ISO/TS 11133-2:2003 DD CEN ISO/TS 11133-2:2003. Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. Practical guidelines on performance testing of culture media
PD CEN/TR 15133:2005 PD CEN/TR 15133:2005. Nomenclature. Collective terms and codes for groups of medical devices
BS EN 14135:2004 BS EN 14135:2004. Coverings. Determination of fire protection ability
ISO/IEC22536 : 2005 EDTN1 ISO/IEC22536 : 2005 EDTN1. ISO/IEC22536 : 2005 Information technology - Telecommunications and information exchange between systems - Near field communication interface and protocol(NFCIP-1) - RF interface test methods
04/30122184 DC 04/30122184 DC. ISO/IEC 22536. Information technology. Telecommunications and information exchange between systems. NFCIP-1- RF. Interface test methods
WD/ISO/IEC22535 : 2005 EDTN1 WD/ISO/IEC22535 : 2005 EDTN1. ISO/IEC22535 : 2005 Information technology - Telecommunications and information exchange between systems - Corporate telecommunication networks - Tunnelling of QSIG over SIP
04/30122182 DC 04/30122182 DC. ISO/IEC 22535. Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Tunnelling of QSIG over SIP
ISO/IEC22534 : 2005 EDTN1 ISO/IEC22534 : 2005 EDTN1. ISO/IEC22534 : 2005 Information technology - Telecommunications and information exchange between systems - Application session services
04/30122177 DC 04/30122177 DC. ISO/IEC 22534. Information technology. Telecommunications and information exchange between systems. Application session services
BS 6037-2:2004 BS 6037-2:2004. Code of practice for the planning, design, installation and use of permanently installed access equipment. Travelling ladders and gantries
BS ISO 7876-4:2004 BS ISO 7876-4:2004. Fuel injection equipment. Vocabulary. High-pressure pipes and end-connections
BS ISO 6519:2004 BS ISO 6519:2004. Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs
BS ISO 13555-3:2004 BS ISO 13555-3:2004. Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Validation of timing devices
DD CEN/TS 14906:2004 DD CEN/TS 14906:2004. Leather. Upholstery leather characteristics. Guide for the selection of leather for automotive
BS 5261C:2005 BS 5261C:2005. Copy preparation and proof correction. Marks for copy preparation and proof correction (extracted from BS 5261-2:2005)
BS 5261-2:2005 BS 5261-2:2005. Copy preparation and proof correction. Specification for typographic requirements, marks for copy preparation and proof correction, proofing procedure
CWA 45547:2004 CWA 45547:2004. Manual for determination of combined heat and power (CHP)
BS ISO 22310:2006 BS ISO 22310:2006. Information and documentation. Guidelines for standards drafters for stating records management requirements in standards
PD IEC TR 61131-4:2004 PD IEC TR 61131-4:2004. Programmable controllers. User guidelines
PD CEN/TR 14819-1:2004 PD CEN/TR 14819-1:2004. Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire. Funicular railways in tunnels
BS EN 1909:2004 BS EN 1909:2004. Safety requirements for cableway installations designed to carry persons. Recovery and evacuation
BS ISO 15370:2001 BS ISO 15370:2001. Ships and marine technology. Low location lighting on passenger ships. Arrangement
BS ISO/IEC 21000-7:2004 BS ISO/IEC 21000-7:2004. Information technology. Multimedia framework (MPEG-21). Digital item adaptation
BS EN 13107:2004 BS EN 13107:2004. Safety requirements for cableway installations designed to carry persons. Civil engineering works
BS ISO 5543:2004 BS ISO 5543:2004. Caseins and caseinates. Determination of fat content. Gravimetric method (reference method)
BS EN 60695-6-1:2005 BS EN 60695-6-1:2005. Fire hazard testing. Smoke obscuration. General guidance
04/30119270 DC 04/30119270 DC. IEC 61033 AMD 1. Test methods for the determination of bond strength of impregnating agents to an enameled wire substrate
PD ISO/IEC TR 24710:2005 PD ISO/IEC TR 24710:2005. Information technology. Radio frequency identification for item management. Elementary tag licence plate funtionality for ISO/IEC 18000 air interface definitions
BS ISO 8083:2006 BS ISO 8083:2006. Machinery for forestry. Falling-object protective structures (FOPS). Laboratory tests and performance requirements
BS ISO 14850-1:2004 BS ISO 14850-1:2004. Nuclear energy. Waste-packages activity measurement. High-resolution gamma spectrometry in integral mode with open geometry
BS EN 12463:2004 BS EN 12463:2004. Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements
BS ISO 7238:2004 BS ISO 7238:2004. Butter. Determination of pH of the serum. Potentiometric method
BS ISO 1740:2004 BS ISO 1740:2004. Milkfat products and butter. Determination of fat acidity (reference method)
BS ISO 5548:2004 BS ISO 5548:2004. Caseins and caseinates. Determination of lactose content. Photometric methods
BS ISO 8086:2004 BS ISO 8086:2004. Dairy plant. Hygiene conditions. General guidance on inspection and sampling procedures
BS ISO 2911:2004 BS ISO 2911:2004. Sweetened condensed milk. Determination of sucrose content. Polarimetric method
BS ISO 3728:2004 BS ISO 3728:2004. Ice-cream and milk ice. Determination of total solids content (reference method)
BS ISO 11929-3:2000 BS ISO 11929-3:2000. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
BS ISO 11929-2:2000 BS ISO 11929-2:2000. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements with the influence of sample treatment
BS ISO 11929-1:2000 BS ISO 11929-1:2000. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements without the influence of sample treatment
BSISO17282 : 2004 (COVERS) BSISO17282 : 2004 (COVERS). Plastics. Guide to the acquisition and presentation of design data
BSISO17282 : 2004 (CD-ROM) BSISO17282 : 2004 (CD-ROM). Plastics. Guide to the acquisition and presentation of design data
BS EN 14998:2005 BS EN 14998:2005. Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods
BS ISO/IEC 15962:2004 BS ISO/IEC 15962:2004. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Data encoding rules and logical memory functions
BS ISO 4998:2005 BS ISO 4998:2005. Continuous hot-dip zinc-coated carbon steel sheet of structural quality
BS EN 62328-2:2005 BS EN 62328-2:2005. Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers. General recording structure
BS EN 62328-1:2005 BS EN 62328-1:2005. Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers. General description and architecture
06/30119140 DC 06/30119140 DC. EN 746-2. Industrial thermoprocessing equipment. Part 2. Safety requirements for combustion and fuel handling systems
BS ISO 22667:2005 BS ISO 22667:2005. Space data and information transfer systems. Communications operations procedure-1
BS ISO 22666:2005 BS ISO 22666:2005. Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
BS ISO 22664:2005 BS ISO 22664:2005. Space data and information systems. TC (telecommand) space data links protocol
BS ISO 22646:2005 BS ISO 22646:2005. Space data and information transfer systems. Space packet protocol
BS ISO 22645:2005 BS ISO 22645:2005. Space data and information transfer systems. TM (telemetry) space data link protocol
BS ISO 22641:2005 BS ISO 22641:2005. Space data and information transfer systems. TM (telemetry) synchronization and channel coding
04/30119106 DC 04/30119106 DC. EN 14972. Fixed firefighting systems. Watermist systems. Design and installation
ISO/IEC22537 : 2006 EDTN1 ISO/IEC22537 : 2006 EDTN1. ISO/IEC22537 : 2006 Information technology - ECMAScript for XML (E4X) specification
04/30119099 DC 04/30119099 DC. ISO/IEC 22537. Information technology. ECMAScript for XML (E4X) specification
BS ISO 8007-3:2004 BS ISO 8007-3:2004. Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units. Sidewall blocks
DD CLC/TS 50433:2005 DD CLC/TS 50433:2005. Guidelines for paving the way for broadband "Broadband, 25 Mbit/s and more for All"
DD CLC/TS 50429:2005 DD CLC/TS 50429:2005. Optical fibre cables. Sewer cables. Family specification for cables to be installed in storm and sanitary sewers
04/30119019 DC 04/30119019 DC. CENELEC TS 50432. Specification for optical patch cords and work area cords
DD CLC/TS 50431:2005 DD CLC/TS 50431:2005. Optical fibre cables. Drinking water pipe cables. Family specification for cables to be installed in drinking water pipes
DD CLC/TS 50430:2005 DD CLC/TS 50430:2005. Optical fibre cables. Gas pipe cables. Family specifications for cables to be installed in high pressure gas pipes
BS ISO 9116:2004 BS ISO 9116:2004. Green coffee. Guidelines on methods of specification
ISO20553 : 2006 EDTN1 ISO20553 : 2006 EDTN1. ISO20553 : 2006 Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material
BIP 2059:2005 BIP 2059:2005. Managing Successful Projects with PRINCE2. Reference manual
BS 8900:2006 BS 8900:2006. Guidance for managing sustainable development
BIP 0058:2004 BIP 0058:2004. ITIL. Software asset management
BIP 0054:2004 BIP 0054:2004. ITIL. The Business perspective
BS EN ISO 10075-3:2004 BS EN ISO 10075-3:2004. Ergonomic principles related to mental workload. Principles and requirements concerning methods for measuring and assessing mental workload
ISO3999 : 2004 EDTN2 ISO3999 : 2004 EDTN2. ISO3999 : 2004 Radiation protection - Apparatus for industrial gamma radiography - Specifications for performance, design and tests
BS ISO 16700:2004 BS ISO 16700:2004. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
BS ISO 17470:2004 BS ISO 17470:2004. Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
BS EN 12251:2004 BS EN 12251:2004. Health informatics. Secure user identification for health care. Management and security of authentication by passwords
DD IEC/TS 60695-6-2:2005 DD IEC/TS 60695-6-2:2005. Fire hazard testing. Smoke obscuration. Summary and relevance of test methods
04/30118849 DC 04/30118849 DC. EN 15013. Plastics piping systems. Non-pressure drainage and sewerage systems buried in ground
BS EN 61935-2:2005 BS EN 61935-2:2005. Testing of balanced communication cabling in accordance with standards series EN 50173. Patch cords and work area cords
BS EN ISO 8092-2:2005 BS EN ISO 8092-2:2005. Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
PD CEN/TR 15071:2005 PD CEN/TR 15071:2005. Safety of toys. National translations of warnings and instructions for use of EN 71
BS EN 12323:2005 BS EN 12323:2005. AIDC technologies. Symbology specifications. Code 16K
BS EN 10207:2005 BS EN 10207:2005. Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
PD CEN/TR 14599:2005 PD CEN/TR 14599:2005. Terms and definitions for welding purposes in relation with EN 1792
BIP 0011:2004 BIP 0011:2004. Privacy in E-Business. Promoting respect, trust and confidence in your organization
BS EN ISO 2538:2003 BS EN ISO 2538:2003. Geometrical product specifications (GPS). Series of angles and slopes on prisms
BS ISO 13715:2000 BS ISO 13715:2000. Technical drawings. Edges of undefined shape. Vocabulary and indications
BS ISO 14617-12:2002 BS ISO 14617-12:2002. Graphical symbols for diagrams. Devices for separating, purification and mixing
BS ISO 14617-11:2002 BS ISO 14617-11:2002. Graphical symbols for diagrams. Devices for heat transfer and heat engines
BS ISO 14617-10:2002 BS ISO 14617-10:2002. Graphical symbols for diagrams. Fluid power converters
BS ISO 14617-9:2002 BS ISO 14617-9:2002. Graphical symbols for diagrams. Pumps, compressors and fans
BS ISO 14617-8:2002 BS ISO 14617-8:2002. Graphical symbols for diagrams. Valves and dampers
BS ISO 14617-7:2002 BS ISO 14617-7:2002. Graphical symbols for diagrams. Basic mechanical components
BS ISO 14617-6:2002 BS ISO 14617-6:2002. Graphical symbols for diagrams. Measurement and control functions
BS ISO 14617-5:2002 BS ISO 14617-5:2002. Graphical symbols for diagrams. Measurement and control devices
BS ISO 14617-4:2002 BS ISO 14617-4:2002. Graphical symbols for diagrams. Actuators and related devices
BS ISO 14617-3:2002 BS ISO 14617-3:2002. Graphical symbols for diagrams. Connections and related devices
BS ISO 14617-2:2002 BS ISO 14617-2:2002. Graphical symbols for diagrams. Symbols having general application
BS ISO 14617-1:2002 BS ISO 14617-1:2002. Graphical symbols for diagrams. General information and indexes
PP 1990:2004 PP 1990:2004. Structural Eurocodes. Guide to the Structural Eurocodes for students of structural design
BS EN 13631-12:2004 BS EN 13631-12:2004. Explosives for civil uses. High explosives. Specifications of boosters with different initiating capability
BS EN 13938-2:2004 BS EN 13938-2:2004. Explosives for civil uses. Propellants and rocket propellants. Determination of resistance to electrostatic energy
ISO/ASTM51539 : 2005 EDTN 2 ISO/ASTM51539 : 2005 EDTN 2. ISO/ASTM51539 : 2005 Standard guide for use of radiation-sensitive indicators
BS ISO 5468:2006 BS ISO 5468:2006. Rotary and rotary impact masonry drill bits with hardmetal tips. Dimensions
BS EN ISO 7200:2004 BS EN ISO 7200:2004. Technical product documentation. Data fields in title blocks and document headers
BS EN 1247:2004 BS EN 1247:2004. Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi-continuous casting machines
DD IEC PAS 62001:2004 DD IEC PAS 62001:2004. Guide to the specification and design evaluation of a.c. filters for HVDC systems
BS EN 12517-1:2006 BS EN 12517-1:2006. Non-destructive testing of welds. Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography. Acceptance levels
BS ISO/IEC TR 14496-9:2004 BS ISO/IEC TR 14496-9:2004. Information technology. Coding of audio-visual objects. Reference hardware description
BS ISO 15995:2006 BS ISO 15995:2006. Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated
BS ISO 14245:2006 BS ISO 14245:2006. Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing
BIP 2038:2004 BIP 2038:2004. Environmental Due Diligence. A Guide to ISO 14015: The role of environmental assessment in environmental due diligence
05/30118367 DC 05/30118367 DC. ISO 1496-1 AMD 4. Series 1 Freight containers. Specification and testing. Part 1. General cargo containers for general purposes
BS EN 60325:2004 BS EN 60325:2004. Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy $0G 60 keV) contamination meters and monitors
BS EN 15017:2005 BS EN 15017:2005. Funeral services. Requirements
BS ISO 18116:2005 BS ISO 18116:2005. Surface chemical analysis. Guidelines for preparation and mounting of specimens for analysis
04/30118285 DC 04/30118285 DC. ISO 15847. Graphic technology. Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
BS ISO 8008:2005 BS ISO 8008:2005. Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
BS EN 1270:2005 BS EN 1270:2005. Playing field equipment. Basketball equipment. Functional and safety requirements, test methods
BS EN ISO 14344:2005 BS EN ISO 14344:2005. Welding and allied processes. Flux and gas shielded electrical welding processes. Procurement guidelines for consumables
BS EN ISO 15265:2004 BS EN ISO 15265:2004. Ergonomics of the thermal environment. Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
BS EN 13284-2:2004 BS EN 13284-2:2004. Stationary source emissions. Determination of low range mass concentration of dust. Automated measuring systems
BS 8456:2005 BS 8456:2005. Code of practice for design and installation of directional sounder evacuation systems
BS EN ISO 14881:2005 BS EN ISO 14881:2005. Integrated optics. Interfaces. Parameters relevant to coupling properties
BS EN ISO 11807-1:2005 BS EN ISO 11807-1:2005. Integrated optics. Vocabulary. Basic terms and symbols
BS EN 13084-6:2004 BS EN 13084-6:2004. Free-standing chimneys. Steel liners. Design and execution
BS ISO 3434:1992 BS ISO 3434:1992. Shipbuilding and marine structures. Heated glass panes for ships rectangular windows
BS ISO 5943:2004 BS ISO 5943:2004. Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS ISO 14183:2005 BS ISO 14183:2005. Animal feeding stuffs. Determination of monensin, narasin and salinomycin contents. Liquid chromatographic method using post-column derivatization
PD ISO/TR 22588:2005 PD ISO/TR 22588:2005. Optics and photonics. Laser and laser-related equipment. Measurement and evaluation of absorption-induced effects in laser optical components
PD ISO/PAS 20858:2004 PD ISO/PAS 20858:2004. Ships and marine technology. Maritime port facility security assessments and security plan development
BS ISO 6621-5:2005 BS ISO 6621-5:2005. Internal combustion engines. Piston rings. Quality requirements
BS EN ISO 9100-12:2005 BS EN ISO 9100-12:2005. Glass containers. Vacuum lug finishes. 89 regular
BS EN ISO 9100-11:2005 BS EN ISO 9100-11:2005. Glass containers. Vacuum lug finishes. 82 regular
BS EN ISO 9100-10:2005 BS EN ISO 9100-10:2005. Glass containers. Vacuum lug finishes. 77 regular
BS EN ISO 9100-9:2005 BS EN ISO 9100-9:2005. Glass containers. Vacuum lug finishes. 63, 66 and 70 deep
BS EN ISO 9100-8:2005 BS EN ISO 9100-8:2005. Glass containers. Vacuum lug finishes. 63, 66 and 70 regular
BS ISO 13216-2:2004 BS ISO 13216-2:2004. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Top tether anchorages and attachments
BS EN ISO 9100-7:2005 BS EN ISO 9100-7:2005. Glass containers. Vacuum lug finishes. 58 deep
BS EN ISO 9100-6:2005 BS EN ISO 9100-6:2005. Glass containers. Vacuum lug finishes. 53 and 58 regular
BS EN ISO 9100-5:2005 BS EN ISO 9100-5:2005. Glass containers. Vacuum lug finishes. 43 and 48 regular
BS EN ISO 9100-1:2005 BS EN ISO 9100-1:2005. Glass containers. Vacuum lug finishes. General
BS EN ISO 14814:2006 BS EN ISO 14814:2006. Road transport and traffic telematics. Automatic vehicle and equipment identification. Reference architecture and terminology
BS EN 14470-1:2004 BS EN 14470-1:2004. Fire safety storage cabinets. Safety storage cabinets for flammable liquids
06/30117784 DC 06/30117784 DC. ISO 12046. Synchronous belt drives. Automotive belts. Determination of physical properties
06/30117776 DC 06/30117776 DC. ISO 5296. Synchronous belt drives. Belts. Pitch codes MXL, XXL, XL, L, H, XH and XXH. Metric and inch dimensions
PD ISO/IEC TR 18047-7:2005 PD ISO/IEC TR 18047-7:2005. Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 433 MHz
BS EN 12921-1:2005 BS EN 12921-1:2005. Machines for surface cleaning and pretreatment of industrial items using liquids or vapours. Common safety requirements
BS EN 12215:2004 BS EN 12215:2004. Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements
BS EN ISO 21469:2006 BS EN ISO 21469:2006. Safety of machinery. Lubricants with incidental product contact. Hygiene requirements
BS EN 12753:2005 BS EN 12753:2005. Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements
BS EN 12581:2005 BS EN 12581:2005. Coating plants. Machinery for dip coating and electrodeposition of organic liquid coating material. Safety requirements
BS EN 12757-1:2005 BS EN 12757-1:2005. Mixing machinery for coating materials. Safety requirements. Mixing machinery for use in vehicle refinishing
BS EN 12621:2006 BS EN 12621:2006. Machinery for the supply and circulation of coating materials under pressure. Safety requirements
ISO4586-2 : 2004 EDTN5 ISO4586-2 : 2004 EDTN5. ISO4586-2 : 2004 High-pressure decorative laminates - Sheets made from thermosetting resins - . Part 2: Determination of properties
ISO4586-1 : 2004 EDTN5 ISO4586-1 : 2004 EDTN5. ISO4586-1 : 2004 High-pressure decorative laminates - Sheets made from thermosetting resins - . Part 1: Classification and specifications
BS EN 14023:2005 BS EN 14023:2005. Bitumen and bituminous binders. Framework specification for polymer modified bitumens
BIP 2049:2006 BIP 2049:2006. Winning with Food Safety. A Guide for business
BS EN ISO 176:2005 BS EN ISO 176:2005. Plastics. Determination of loss of plasticizers. Activated carbon method
BS EN 13069:2005 BS EN 13069:2005. Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods
BS ISO 4999:2005 BS ISO 4999:2005. Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
06/30117543 DC 06/30117543 DC. ISO 7967-5. RIC engines. Vocabulary of components and subsystems. Part 5. Cooling systems
BS EN 60923:2005 BS EN 60923:2005. Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
BS EN 13817:2004 BS EN 13817:2004. Surfaces for sports areas. Procedure for accelerated ageing by exposure to hot air
BS EN 13744:2004 BS EN 13744:2004. Surfaces for sports areas. Procedure for accelerated ageing by immersion in hot water
PD EN 14035-13:2004 PD EN 14035-13:2004. Fireworks. Flash pellets. Specification and test methods
BS 8454:2006 BS 8454:2006. Code of practice for the delivery of training and education for work at height and rescue
BS 7960:2005 BS 7960:2005. Door supervisors. Code of practice
BS EN 13722:2004 BS EN 13722:2004. Furniture. Assessment of the surface gloss
ISO/IEC19503 : 2005 EDTN1 ISO/IEC19503 : 2005 EDTN1. ISO/IEC19503 : 2005 Information technology - XML Metadata Interchange (XMI)
ISO/IEC19502 : 2005 EDTN1 ISO/IEC19502 : 2005 EDTN1. ISO/IEC19502 : 2005 Information technology - Meta Object Facility (MOF)
BS EN 14595:2005 BS EN 14595:2005. Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent
BS EN 14596:2005 BS EN 14596:2005. Tanks for transport of dangerous goods. Service equipment for tanks. Emergency pressure relief valve
BS ISO 18232:2006 BS ISO 18232:2006. Health informatics. Messages and communication. Format of length limited globally unique string identifiers
BS EN 725-9:2006 BS EN 725-9:2006. Advanced technical ceramics. Methods of test for ceramic powders. Determination of untapped bulk density
BS EN 725-8:2006 BS EN 725-8:2006. Advanced technical ceramics. Methods of test for ceramic powders. Determination of tapped bulk density
BS ISO 16124:2004 BS ISO 16124:2004. Steel wire rod. Dimensions and tolerances
05/30117281 DC 05/30117281 DC. ISO 10265. Earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems
06/30117277 DC 06/30117277 DC. ISO 9249. Earth-moving machinery. Engine test code. Net power
BS ISO 21413:2005 BS ISO 21413:2005. Manual methods for the measurement of a groundwater level in a well
BIP 2040:2004 BIP 2040:2004. Winning with the Disability Discrimination Act. A Guide for Business
BIP 3017:2004 BIP 3017:2004. Occupational Health and Safety (OH&S) Standards and Guidance CD-ROM
KIT 137 KIT 137. CSR. Effective implementation kit
BIP 2052 Presentation Set BIP 2052 Presentation Set. Occupational health & safety management systems. Standards & guidance presentation set
BIP 2050:2004 BIP 2050:2004. Managing Safety the Systems Way
BIP 2046:2005 BIP 2046:2005. Winning with Health and Safety. A Guide for business
BIP 2042:2004 BIP 2042:2004. Implementing Effective Corporate Social Responsibility and Corporate Governance. A Guide
BIP 2041:2004 BIP 2041:2004. Implementing Effective Corporate Social Responsibility and Corporate Governance. A Framework
BS EN 50288-7:2005 BS EN 50288-7:2005. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for instrumentation and control cables
BS EN 14434:2004 BS EN 14434:2004. Writing boards for educational institutions. Ergonomic, technical and safety requirements and their test methods
BS EN 14617-9:2005 BS EN 14617-9:2005. Agglomerated stone. Test methods. Determination of impact resistance
BS EN 14617-6:2005 BS EN 14617-6:2005. Agglomerated stone. Test methods. Determination of thermal shock resistance
BS EN 14617-4:2005 BS EN 14617-4:2005. Agglomerated stone. Test methods. Determination of abrasion resistance
BS EN 14617-5:2005 BS EN 14617-5:2005. Agglomerated stone. Test methods. Determination of freeze and thaw resistance
BS EN 14617-16:2005 BS EN 14617-16:2005. Agglomerated stone. Test methods. Determination of dimensions, geometric characteristics and surface quality of modular tiles
BS EN 14617-15:2005 BS EN 14617-15:2005. Agglomerated stone. Test methods. Determination of compressive strength
BS EN 14617-12:2005 BS EN 14617-12:2005. Agglomerated stone. Test methods. Determination of dimensional stability
BS EN 14617-11:2005 BS EN 14617-11:2005. Agglomerated stone. Test methods. Determination of linear thermal expansion coefficient
BS EN 14617-10:2005 BS EN 14617-10:2005. Agglomerated stone. Test methods. Determination of chemical resistance
BS EN 14617-1:2005 BS EN 14617-1:2005. Agglomerated stone. Test methods. Determination of apparent density and water absorption
BS EN 1994-2:2005 BS EN 1994-2:2005. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges
BS EN 14564:2004 BS EN 14564:2004. Tanks for transport of dangerous goods. Terminology
ISO13912 : 2005 EDTN1 ISO13912 : 2005 EDTN1. ISO13912 : 2005 Structural timber - Machine strength grading - Basic principles
ISO9709 : 2005 EDTN1 ISO9709 : 2005 EDTN1. ISO9709 : 2005 Structural timber - Visual strength grading - Basic principles
PAS 60-2:2004 PAS 60-2:2004. Equipment used in the controlled removal of asbestos-containing materials. Negative Pressure Units. Specification
BS EN ISO 15652: 2005 BS EN ISO 15652: 2005. Small craft. Remote steering systems for inboard mini jet boats
PD ISO/TR 230-9:2005 PD ISO/TR 230-9:2005. Test code for machine tools. Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
05/30116935 DC 05/30116935 DC. BS EN 15428. Soil improvers and growing media. Determination of particle size distribution
BS ISO 11884-1:2006 BS ISO 11884-1:2006. Optics and photonics. Minimum requirements for stereomicroscopes. Stereomicroscopes for general use
BS ISO 18252:2006 BS ISO 18252:2006. Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Routine method)
BS ISO 12078:2006 BS ISO 12078:2006. Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Reference method)
BS ISO/IEC 11694-2:2005 BS ISO/IEC 11694-2:2005. Identification cards. Optical memory cards. Linear recording method. Dimensions and location of the accessible optical area
BS ISO/IEC 11694-1:2005 BS ISO/IEC 11694-1:2005. Identification cards. Optical memory cards. Linear recording method. Physical characteristics
BS ISO/IEC 11693:2005 BS ISO/IEC 11693:2005. Identification cards. Optical memory cards. General characteristics
BS ISO/IEC 19785-2:2006 BS ISO/IEC 19785-2:2006. Information technology. Common biometric exchange formats framework. Procedures for the operation of the biometric registration authority
BS EN 15002:2006 BS EN 15002:2006. Characterization of waste. Preparation of test portions from the laboratory sample
BS EN 12258-4:2004 BS EN 12258-4:2004. Aluminium and aluminium alloys. Terms and definitions. Residues of the aluminium industry
BS EN 12258-2:2004 BS EN 12258-2:2004. Aluminium and aluminium alloys. Terms and definitions. Chemical analysis
BS EN 12927-4:2004 BS EN 12927-4:2004. Safety requirements for cableway installations designed to carry person. Ropes. End fixings
BS EN 12927-3:2004 BS EN 12927-3:2004. Safety requirements for cableways installation designed to carry persons. Ropes. Long splicing of 6 strand hauling, carrying hauling and towing ropes
BS EN 12927-8:2004 BS EN 12927-8:2004. Safety requirements for cableways installation designed to carry persons. Ropes. Magnetic rope testing (MRT)
BS EN 12929-1:2004 BS EN 12929-1:2004. Safety requirements for cableways installation designed to carry persons. General requirements. Requirements for all installations
BS EN 12930:2004 BS EN 12930:2004. Safety requirements for cableway installations designed to carry persons. Calculations
BS EN 1908:2004 BS EN 1908:2004. Safety requirements for cableways installations designed to carry person. Tensionong Devices
BS EN 13223:2004 BS EN 13223:2004. Safety requirements for cableways installations designed to carry persons. Drive systems and other mechanical equipment
BS EN 1709:2004 BS EN 1709:2004. Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks
BS EN 12397:2004 BS EN 12397:2004. Safety requirements for Cableway installations designed to carry persons. Operation
BS EN 12408:2004 BS EN 12408:2004. Safety requirements for cableways installations designed to carry person. Quality control
BS EN 12929-2:2004 BS EN 12929-2:2004. Safety requirements for cableways installations designed to carry persons. General requirements. Additional requirements for reversible bi-cable aerial ropeways without carrier truck brakes
BS EN 12927-1:2004 BS EN 12927-1:2004. Safety requirements for cableways installation designed to carry persons. Ropes. Selection criteria for ropes and their end fixing
BS EN 12927-5:2004 BS EN 12927-5:2004. Safety requirements for cableway installations designed to carry person. Ropes. Storage, transportation, installation and tensioning
BS ISO 2920:2004 BS ISO 2920:2004. Whey cheese. Determination of dry matter (Reference method)
BS ISO 6611:2004 BS ISO 6611:2004. Milk and milk products. Enumeration of colony-forming units of yeasts and/or moulds. Colony-count technique at 25°C
BS EN 12927-7:2004 BS EN 12927-7:2004. Safety requirments for cableways installations designed to carry persons. Ropes. Inspection, repair and maintenance
BS EN 1996-1-2:2005 BS EN 1996-1-2:2005. Eurocode 6. Design of masonry structures. General rules. Structural fire design
BS ISO 14400:2005 BS ISO 14400:2005. Road vehicles. Wheels and rims. Use, general maintenance and safetyrequi rements and out-of-service conditions
BS EN 1007-4:2004 BS EN 1007-4:2004. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of tensile properties of filaments at ambient temperature
BS ISO 18431-1:2005 BS ISO 18431-1:2005. Mechanical vibration and shock. Signal processing. General introduction
BS ISO 3086:2006 BS ISO 3086:2006. Iron ores. Experimental methods for checking the bias of sampling
PD ISO/TR 11071-1:2004 PD ISO/TR 11071-1:2004. Comparison of worldwide lift safety standards. Electric lifts (elevators)
BS ISO 20252:2006 BS ISO 20252:2006. Market, opinion and social research. Vocabulary and service requirements
BS EN ISO 5999:2004 BS EN ISO 5999:2004. Polymeric materials, cellular flexible. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
BS ISO 17053:2005 BS ISO 17053:2005. Steel and iron. Determination of oxygen. Infrared method after fusion under inert gas
BS ISO 13899-2:2005 BS ISO 13899-2:2005. Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Determination of Nb Content
ISO13899-2 : 2005 EDTN1 ISO13899-2 : 2005 EDTN1. ISO13899-2 : 2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of Nb content
BS EN ISO 14644-5:2004 BS EN ISO 14644-5:2004. Cleanrooms and associated controlled environments. Operations
BS EN ISO 14644-7:2004 BS EN ISO 14644-7:2004. Cleanrooms and associated controlled environments. Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
BS ISO 1738:2004 BS ISO 1738:2004. Butter. Determination of salt content
BS EN ISO 7088:2005 BS EN ISO 7088:2005. Fish-meal. Vocabulary
BS EN 606:2004 BS EN 606:2004. Bar coding. Transport and handling labels for steel products
BS EN 14887:2005 BS EN 14887:2005. Glass packaging. Cork removal devices. General requirements
BS EN 13129-2:2004 BS EN 13129-2:2004. Railway applications. Air conditioning for main line rolling stock. Type tests
BS EN 62317-4:2005 BS EN 62317-4:2005. Ferrite cores. Dimensions. RM-cores and associated parts
BS EN 71-11:2005 BS EN 71-11:2005. Safety of toys. Organic chemical compounds. Methods of analysis
BS EN ISO 10087:2006 BS EN ISO 10087:2006. Small craft. Craft identification. Coding system
BS ISO 23081-1:2006 BS ISO 23081-1:2006. Information and documentation. Records management processes. Metadata for records. Principles
BS ISO 10378:2005 BS ISO 10378:2005. Copper, lead and zinc sulfide concentrates. Determination of gold and silver. Fire assay gravimetric and flame atomic absorption spectrometric method
BS EN 60216-4-1:2006 BS EN 60216-4-1:2006. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Single-chamber ovens
BS EN 13742-2:2004 BS EN 13742-2:2004. Irrigation techniques. Solid set sprinkler systems. Test methods
BS EN 13742-1:2004 BS EN 13742-1:2004. Irrigation techniques. Solid set sprinkler systems. Selection, design, planning and installation
BS EN 61347-2-12:2005 BS EN 61347-2-12:2005. Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic Ballasts for discharge lamps (excluding fluorescent lamps)
BIP 2044:2004 BIP 2044:2004. A Guide to BS 5839-6:2004
KIT 139 KIT 139. Design of fire detection installations for dwellings kit
BS EN 1854:2006 BS EN 1854:2006. Pressure sensing devices for gas burners and gas burning appliances
BS EN 13617-2:2004 BS EN 13617-2:2004. Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
BS EN 62359:2005 BS EN 62359:2005. Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
BS PL 9:2005 BS PL 9:2005. Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods
BS PL 8:2005 BS PL 8:2005. Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification
BS PL 7:2005 BS PL 7:2005. Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates. Test methods
BS PL 6:2005 BS PL 6:2005. Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites. Specification
BS PL 5:2005 BS PL 5:2005. Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods
BS PL 4:2005 BS PL 4:2005. Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Specification
PD ISO/TR 17766:2005 PD ISO/TR 17766:2005. Centrifugal pumps handling viscous liquids. Performance corrections
BS EN 1366-6:2004 BS EN 1366-6:2004. Fire resistance tests for service installations. Raised access and hollow core floors
BS EN 1365-6:2004 BS EN 1365-6:2004. Fire resistance tests for loadbearing elements. Stairs
BS EN 1365-5:2004 BS EN 1365-5:2004. Fire resistance tests for loadbearing elements. Balconies and walkways
BS ISO/IEC 15476-3:2006 BS ISO/IEC 15476-3:2006. Information technology. CDIF semantic metamodel. Data definitions
BS EN ISO 9046:2004 BS EN ISO 9046:2004. Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at constant temperature
BS IEC 61225:2005 BS IEC 61225:2005. Nuclear power plants. Instrumentation and control systems important to safety. Requirements for electrical supplies
BS ISO 856:2006 BS ISO 856:2006. Oil of peppermint (Mentha x piperita L.)
BS EN 957-1:2005 BS EN 957-1:2005. Stationary training equipment. General safety requirements and test methods
BS EN 12875-5:2006 BS EN 12875-5:2006. Mechanical dishwashing resistance of utensils. Rapid test for ceramic catering articles
PD CEN/TR 15134:2005 PD CEN/TR 15134:2005. Non-destructive testing. Automated ultrasonic examination. Selection and application of systems
ISO22199 : 2006 EDTN1 ISO22199 : 2006 EDTN1. ISO22199 : 2006 Electromagnetic compatibility . Product family standards for lifts, escalators and moving walks - Emission
WD/ISO22200 : 2006 EDTN1 WD/ISO22200 : 2006 EDTN1. ISO22200 : 2006 Electromagnetic compatibility . Product family standards of lifts, escalators and moving walks - Immunity
BS EN 12875-4:2006 BS EN 12875-4:2006. Mechanical dishwashing resistance of utensils. Rapid test for domestic ceramic articles
BS EN 50377-7-1:2004 BS EN 50377-7-1:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre
BS EN 13020:2004 BS EN 13020:2004. Road surface treatment machines. Safety requirements
BS ISO 21561:2005 BS ISO 21561:2005. Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
ISO/TR17671-6 : 2005 EDTN1 ISO/TR17671-6 : 2005 EDTN1. ISO/TR17671-6 : 2005 Welding - Recommendations for welding of metallic materials -. Part 6 : Laser beam welding
PD ISO/TR 19122:2004 PD ISO/TR 19122:2004. Geographic information/Geomatics. Qualification and certification of personnel
BS EN 14956:2005 BS EN 14956:2005. Surfaces for sports areas. Determination of water content of unbound mineral surfaces for outdoor sports areas
BS EN 14955:2005 BS EN 14955:2005. Surfaces for sports areas. Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas
BS EN 14954:2005 BS EN 14954:2005. Surfaces for sports areas. Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
BS ISO 14835-1:2005 BS ISO 14835-1:2005. Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular function. Measurement and evaluation of finger skin temperature
BS EN 14953:2005 BS EN 14953:2005. Surfaces for sport areas. Determination of thickness of unbound mineral surfaces for outdoor sports areas
BS EN 14952:2005 BS EN 14952:2005. Surfaces for sports areas. Determination of water absorption of unbound minerals
BS EN 1860-2:2005 BS EN 1860-2:2005. Appliances, solid fuels and firelighters for barbecueing. Barbecue charcoal and barbecue charcoal briquettes. Requirements and test methods
ISO7240-21 : 2005 EDTN1 ISO7240-21 : 2005 EDTN1. ISO7240-21 : 2005 Fire detection and alarm systems. Routing equipment
ISO7240-13 : 2005 EDTN1 ISO7240-13 : 2005 EDTN1. ISO7240-13 : 2005 Fire detection and alarm systems -. Part 13: Compatibility assessment of system components
BS EN ISO 15547-2:2005 BS EN ISO 15547-2:2005. Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers. Brazed aluminium plate-fin heat exchangers
BS EN ISO 15547-1: 2005 BS EN ISO 15547-1: 2005. Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers. Plate-and-frame heat exchangers
BS EN 50436-1:2005 BS EN 50436-1:2005. Alcohol interlocks. Test methods and performance requirements. Instruments for drink-driving-offender programs
BS ISO 15261:2004 BS ISO 15261:2004. Vibration and shock generating systems. Vocabulary
BSISO/IECTR14496-9 : 04(CD-ROM) BSISO/IECTR14496-9 : 04(CD-ROM). BSISO/IECTR14496-9 : 2004 Information technology - Coding of audio-visual objects. Part 9 : Reference Hardware Description
ISO/IEC14776-222 : 2005 EDTN 1 ISO/IEC14776-222 : 2005 EDTN 1. ISO/IEC14776-222 : 2005 Information technology - Small Computer System Interface (SCSI) . Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2)
ISO/IEC14776-150 : 2004 EDTN1 ISO/IEC14776-150 : 2004 EDTN1. ISO/IEC14776-150 Information technology -- Small Computer System Interface (SCSI) -- . Part 150: Serial Attached SCSI (SAS)
ISO20242-1 : 2005 EDTN 1 ISO20242-1 : 2005 EDTN 1. ISO20242-1 : 2005 Industrial automation systems and integration - Service interface for testing applications. Part 1: Overview
BS ISO 21750:2006 BS ISO 21750:2006. Road vehicles. Safety enhancement in conjunction with tyre inflation pressure monitoring
BS EN 13025-3:2005 BS EN 13025-3:2005. Packaging. Light gauge metal containers. Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 13025-2:2005 BS EN 13025-2:2005. Packaging. Light gauge metal containers. Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 13025-1:2005 BS EN 13025-1:2005. Packaging. Light gauge metal containers. Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
BS ISO 23671:2006 BS ISO 23671:2006. Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
BS EN 50412-2-1:2005 BS EN 50412-2-1:2005. Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz. Residential, commercial and industrial environment. Immunity requirements
BS ISO/IEC 16085:2004 BS ISO/IEC 16085:2004. Information technology. Software life cycle processes. Risk management
BS EN ISO 14819-6:2006 BS EN ISO 14819-6:2006. Traffic and traveller information (TTI). TTI messages via traffic message coding. Encryption and conditional access for the radio data system. Traffic message channel ALERT C coding
BS EN 14867:2005 BS EN 14867:2005. Packaging. Plastic freezer bags. Specifications and test methods
BS EN 14603:2004 BS EN 14603:2004. Information technology. Alphanumeric glyph image set for optical character recognition OCR-B. Shapes and dimensions of the printed image
PD EN 14035-17:2004 PD EN 14035-17:2004. Fireworks. Ground spinners. Specification and test methods
PD EN 14035-10:2004 PD EN 14035-10:2004. Fireworks. Double bangers. Specification and test methods
PD EN 14035-9:2004 PD EN 14035-9:2004. Fireworks. Crackling granules. Specification and test methods
PD EN 14035-8:2004 PD EN 14035-8:2004. Fireworks. Bengal sticks. Specification and test methods
PD EN 14035-3:2004 PD EN 14035-3:2004. Fireworks. Aerial wheels. Specification and test methods
BS EN 14035-36:2004 BS EN 14035-36:2004. Fireworks. Wheels. Specification and test methods
BS EN 14035-29:2004 BS EN 14035-29:2004. Fireworks. Serpents. Specification and test methods
BS EN 14035-24:2004 BS EN 14035-24:2004. Fireworks. Novelty matches. Specification and test methods
BS EN 14035-22:2004 BS EN 14035-22:2004. Fireworks. Mines. Specification and test methods
BS EN 14035-7:2004 BS EN 14035-7:2004. Fireworks. Bengal matches. Specification and test methods
BS EN 14035-6:2004 BS EN 14035-6:2004. Fireworks. Bengal flames. Specification and test methods
BS EN ISO 10942:2006 BS EN ISO 10942:2006. Ophthalmic instruments. Direct ophthalmoscopes
BS EN 13672:2004 BS EN 13672:2004. Surfaces for sports areas. Determination of resistance to abrasion of non-filled synthetic turf
BS EN 13938-7:2004 BS EN 13938-7:2004. Explosives for civil uses. Propellants and rocket propellants. Determination of properties of black powder
BS EN 13938-5:2004 BS EN 13938-5:2004. Explosives for civil uses. Propellants and rocket propellants. Determination of voids and fissures
BS EN 13763-26:2004 BS EN 13763-26:2004. Explosives for civil uses. Detonators and relays. Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays
BS EN 13631-16:2004 BS EN 13631-16:2004. Explosives for civil uses. High explosives. Detection and measurement of toxic gases
BS EN 13631-3:2004 BS EN 13631-3:2004. Explosives for civil uses. High explosives. Determination of sensitiveness to friction of explosives
BS EN ISO 16708:2006 BS EN ISO 16708:2006. Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods
05/30114880 DC 05/30114880 DC. BS EN 15171. Characterization of sludges. Determination of adsorbable organically bound halogens
BS ISO 17380:2004 BS ISO 17380:2004. Soil quality. Determination of total cyanide and easily released cyanide. Continuous-flow analysis method
BS ISO 22155:2005 BS ISO 22155:2005. Soil quality. Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
06/30114826 DC 06/30114826 DC. BS ISO 20906. Acoustics. Continuous airport noise monitoring
BS EN ISO 17201-4:2006 BS EN ISO 17201-4:2006. Acoustics. Noise from shooting ranges. Prediction of projectile sound
BS EN ISO 17201-1:2005 BS EN ISO 17201-1:2005. Acoustics. Noise from shooting ranges. Determination of muzzle blast by measurement
BS EN 14499:2004 BS EN 14499:2004. Textile floor coverings. Minimum requirements for carpet underlays
BS EN 61338-2:2004 BS EN 61338-2:2004. Waveguide type dielectric resonators. Guidelines for oscillator and filter applications
BS EN 60308:2005 BS EN 60308:2005. Hydraulic turbines. Testing of control systems
BS EN ISO 13791:2004 BS EN ISO 13791:2004. Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures
BS ISO 15597:2001, BS 2000-503:2004 BS ISO 15597:2001, BS 2000-503:2004. Methods of test for petroleum and its products. BS 2000-503. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry
BS ISO/IEC 19796-1:2005 BS ISO/IEC 19796-1:2005. Information technology. Learning, education and training. Quality manage ment, assurance and metrics. General approach
BS EN ISO 15927-4:2005 BS EN ISO 15927-4:2005. Hygrothermal performance of buildings. Calculation and presentation of climatic data. Hourly data for assessing the annual energy use for heating and cooling
BS ISO 14788:2005 BS ISO 14788:2005. Continuous hot-dip zinc-5% aluminium alloy coated steel sheet
BS ISO 3575:2005 BS ISO 3575:2005. Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
BS ISO 15830-4:2005 BS ISO 15830-4:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. User's manual
BS ISO 15830-3:2005 BS ISO 15830-3:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Electronic subsystems
BS ISO 15830-2:2005 BS ISO 15830-2:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Mechanical subsystems
BS ISO 15830-1:2005 BS ISO 15830-1:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Terminology and rationale
BS EN ISO 20838:2006 BS EN ISO 20838:2006. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for amplification and detection for qualitative methods
BS EN 60320-2-4:2006 BS EN 60320-2-4:2006. Appliance couplers for household and similar general purposes. Couplers dependent on appliance weight for engagement
DD CEN ISO/TS 18234-5:2006 DD CEN ISO/TS 18234-5:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Public transport information (PTI) application
DD CEN ISO/TS 17261:2005 DD CEN ISO/TS 17261:2005. Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport architecture and terminology
BS ISO 9022-7:2005 BS ISO 9022-7:2005. Optics and photonics. Environmental test methods. Resistance to drip or rain
BS EN 14959:2006 BS EN 14959:2006. Touch and close fasteners. Determination of resistance to fraying after washing
BS ISO 22168:2006 BS ISO 22168:2006. Road vehicles. Holding test of coatings influencing the colour of light emitted by light sources). Test methods
ISO17874-4 : 2006 EDTN1 ISO17874-4 : 2006 EDTN1. ISO17874-4 : 2006 Remote handling devices for radioactive materials. Part 4: Power manipulators
BS EN 12976-2:2006 BS EN 12976-2:2006. Thermal solar systems components. Factory made systems. Test methods
BS ISO 15686-6:2004 BS ISO 15686-6:2004. Buildings and constructed assets. Service life planning. Procedures for considering environmental impacts
BS EN ISO 20837:2006 BS EN ISO 20837:2006. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for sample preparation for qualitative detection
PD CEN/TR 14922:2004 PD CEN/TR 14922:2004. Portable fire extinguishers. Model laboratory. Report in compliance with EN 3-7
ISO14096-2 : 2005 EDTN1 ISO14096-2 : 2005 EDTN1. ISO14096-2 : 2005 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2 : Minimum requirements
ISO14096-1 : 2005 EDTN1 ISO14096-1 : 2005 EDTN1. ISO14096-1 : 2005 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS EN ISO 6401:2004 BS EN ISO 6401:2004. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method
BS EN 14294:2004 BS EN 14294:2004. Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes
04/30113996 DC 04/30113996 DC. prEN81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility
BS 3632:2005 BS 3632:2005. Residential park homes. Specification
DD IEC/TS 61934:2006 DD IEC/TS 61934:2006. Electrical insulating materials and systems. Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
BS EN 14291:2004 BS EN 14291:2004. Foam producing solutions for leak detection on gas installations
BS ISO 22977:2005 BS ISO 22977:2005. Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
BS EN 14594:2005 BS EN 14594:2005. Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking
BS EN 14593-2:2005 BS EN 14593-2:2005. Respiratory protective devices. Compressed air line breathing apparatus with demand valve. Apparatus with a half mask at positive pressure. Requirements, testing, marking
BS EN 14593-1:2005 BS EN 14593-1:2005. Respiratory protective devices. Compressed air line breathing apparatus with demand valve. Apparatus with a full mask. Requirements, testing, marking
BS EN 14870-2:2004 BS EN 14870-2:2004. Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Fittings
04/30113869 DC 04/30113869 DC. EN 1506. Ventilation for buildings. Sheet metal air ducts and fittings with circular cross-section. Dimension
DD CEN/TS 12983-2:2005 DD CEN/TS 12983-2:2005. Cookware. Domestic cookware for use on top of a stove, cooker or hob. Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware
BS ISO 15634:2005 BS ISO 15634:2005. Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method
BS EN 60846:2004 BS EN 60846:2004. Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
BS ISO 3865:2005 BS ISO 3865:2005. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS EN 12976-1:2006 BS EN 12976-1:2006. Thermal solar systems and components. Factory made systems. General requirements
PAS 64:2005 PAS 64:2005. Professional water mitigation and initial restoration of domestic dwellings. Code of practice
BS ISO 8600-5:2005 BS ISO 8600-5:2005. Optics and photonics. Medical endoscopes and endotherapy devices. Determination of optical resolution of rigid endoscopes with optics
BS ISO 19932-2:2006 BS ISO 19932-2:2006. Equipment for crop protection. Knapsack sprayers. Performance limits
BS ISO 19932-1:2006 BS ISO 19932-1:2006. Equipment for crop protection. Knapsack sprayers. Requirements and test methods
BS ISO 6055:2004 BS ISO 6055:2004. Industrial trucks. Overhead guards. Specification and testing
BS EN 2486:2005 BS EN 2486:2005. Aerospace series. Aluminium alloy AL-P2618A. Forging stock
BS EN 4287:2005 BS EN 4287:2005. Aerospace series. Aluminium alloy AL-P7010. Forging stock
BS EN 61005:2004 BS EN 61005:2004. Radiation protection instrumentation. Neutron ambient dose equivalent (rate) meters
PD ISO/IEC TR 10032:2003 PD ISO/IEC TR 10032:2003. Information technology. Reference model of data management
BS 8449:2005 BS 8449:2005. Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures
BS EN 14039:2004 BS EN 14039:2004. Characterization of waste. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography.
BS EN 14124:2004 BS EN 14124:2004. Inlet valves for flushing cisterns with internal overflow
BS EN ISO 4263-4:2006 BS EN ISO 4263-4:2006. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test. Procedure for industrial gear oils
ISO4263-4 : 2006 EDTN1 ISO4263-4 : 2006 EDTN1. ISO4263-4 : 2006 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test. Part 4: Procedure for industrial gear oils
DD CEN/TS 14918:2005 DD CEN/TS 14918:2005. Solid biofuels. Method for the determination of calorific value
BS EN ISO 4263-3:2006 BS EN ISO 4263-3:2006. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test. Anhydrous procedure for synthetic hydraulic fluids
BS EN 14435:2004 BS EN 14435:2004. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only. Requirements, testing, marking
BS EN 309:2005 BS EN 309:2005. Particleboards. Definition and classification
BS 7775:2005 BS 7775:2005. Penstocks for use in water and other liquid flow applications. Specification
BS ISO 8178-11:2006 BS ISO 8178-11:2006. Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment