2009/09/07

Cheapest & Latest BSI Standard (PDF) (60)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS 5502-40:1990 BS 5502-40:1990. Buildings and structures for agriculture. Code of practice for design and construction of cattle buildings
BS 5540-6:1990 BS 5540-6:1990. Evaluating particulate contamination of hydraulic fluids. Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
BS 6100-6.6.2:1990 BS 6100-6.6.2:1990. Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Plaster
BS EN 2288:1990 BS EN 2288:1990. Specification for bushes flanged, corrosion resisting steel with self-lubricating liner. Dimensions and loads
BS EN 2498:1990 BS EN 2498:1990. Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and loads
BS EN 2587:1990 BS EN 2587:1990. Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads
BS 1771-2:1990 BS 1771-2:1990. Fabrics for uniforms and workwear. Specification for fabrics from cellulosic fibres, synthetic fibres and blends
BS 3953:1990 BS 3953:1990. Specification for synthetic resin bonded woven glass fabric laminated sheet
BS 4543-3:1990 BS 4543-3:1990. Factory-made insulated chimneys. Specification for chimneys with stainless steel fluelining for use with oil fired appliances
BS 5131-4.12:1990 BS 5131-4.12:1990. Methods of test for footwear and footwear materials. Other components. Fastness of fibreboard finishes to rubbing in the presence of water and perspiration
BS 5131-5.3:1990 BS 5131-5.3:1990. Methods of test for footwear and footwear materials. Testing of complete footwear. Resistance of complete footwear to heat
BS 6240:1990, EN 118:1990 BS 6240:1990, EN 118:1990. Wood preservatives. Determination of preventive action against Reticulitermes santonensis de Feytaud (laboratory method)
BS 6458:Part 1:1990, IEC 60695-4:1989 BS 6458:Part 1:1990, IEC 60695-4:1989. Fire hazard testing for electrotechnical products. Glossary of terms
BS EN 2285:1990 BS EN 2285:1990. Specification for bushes plain, aluminium alloy with self-lubricating liner. Dimensions and loads
BS EN 2286:1990 BS EN 2286:1990. Specification for bushes flanged, aluminium alloy with self-lubricating liner. Dimensions and loads
BS EN 2287:1990 BS EN 2287:1990. Specification for bushes plain, corrosion resisting steel with self-lubricating liner. Dimensions and loads
BS EN 2311:1990 BS EN 2311:1990. Specification for bushes with self-lubricating liner. Technical specification
BS EN 2515:1990 BS EN 2515:1990. Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads
BS EN 2574:1990 BS EN 2574:1990. Specification for welds. Information on drawings
BS 6906-7:1990 BS 6906-7:1990. Methods of test for geotextiles. Determination of in-plane waterflow
BS 4973-4:1990 BS 4973-4:1990. Interlinings. Specification for woven sew-in interlinings
BS 5852:1990 BS 5852:1990. Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
BS 6223:1990 BS 6223:1990. Specification for friction welding of joints in metals
BS 9522 N0003:1990 BS 9522 N0003:1990. Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles. Full plus airframe fit assessment.
BS 5350-B8:1990 BS 5350-B8:1990. Methods of test for adhesives. Adhesives. Determination of viscosity
BS 4105:1990 BS 4105:1990. Specification for liquid carbon dioxide, industrial
BS 1133-7.5:1990 BS 1133-7.5:1990. Packaging code. Paper and board wrappers, bags and containers. Fibreboard cases and fitments
BS 5131-0:1990 BS 5131-0:1990. Methods of test for footwear and footwear materials. General introduction
BS ISO 4902:1989 BS ISO 4902:1989. Information technology. Data communication. 37-pole DTE/DCE interface connector and contact number assignments
BS ISO 4903:1989 BS ISO 4903:1989. Information technology. Data communication. 15-pole DTE/DCE interface connector and contact number assignments
BS EN 29506-2:1995 BS EN 29506-2:1995. Industrial automation systems. Manufacturing message specification. Protocol specification
BS 1610-3:1990 BS 1610-3:1990. Materials testing machines and force verification equipment. Specification for the grading of the forces applied by deadweight and lever creep testing machines
BS1747-10:1990, ISO 6767:1990 BS1747-10:1990, ISO 6767:1990. Methods for measurement of air pollution. Determination of the mass concentration of sulphur dioxide in ambient air: tetrachloromercurate (TCM)/pararosaniline method
BS EN 29117:1992, ISO 9117:1990 BS EN 29117:1992, ISO 9117:1990. Methods of test for paints. Tests associated with paint film formation. Paints and varnishes. Determination of through-dry state and through-dry time. Method of test
BS 5131-5.1:1990 BS 5131-5.1:1990. Methods of test for footwear and footwear materials. Testing of complete footwear. Adhesion of stuck-on and moulded-on soles
BS 5131-5.2:1990 BS 5131-5.2:1990. Methods of test for footwear and footwear materials. Testing of complete footwear. Degree of vulcanization of moulded-on rubber soles
BS 5173-103.7:1991 BS 5173-103.7:1991. Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses
BS 525:1991 BS 525:1991. Specification for fibre cores for wire ropes
BS 3456-202.16:1990, EN 60335-2-16:1989 BS 3456-202.16:1990, EN 60335-2-16:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Food waste disposers
BS 3456-202.19:1990, EN 60335-2-19:1989 BS 3456-202.19:1990, EN 60335-2-19:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Battery-powered shavers, hair clippers and similar appliances and their charging and battery assemblies
BS 3456-202.20:1990, EN 60335-2-20:1989 BS 3456-202.20:1990, EN 60335-2-20:1989. Specification for safety of household and similar electrical appliances. Particular requirements. Battery-powered tooth-brushes and their charging and battery assemblies
BS 5131-3.1:1991 BS 5131-3.1:1991. Methods of test for footwear and footwear materials. Uppers, textiles and threads. Strength of upper materials and lining materials at right angles to stitch perforations
BS 5131-4.9:1991 BS 5131-4.9:1991. Methods of test for footwear and footwear materials. Other components. Fatigue resistance of heels of ladies' shoes
BS 5343-2:1991 BS 5343-2:1991. Gas detector tubes. Specification for long term gas detector tubes
BS 5386-6:1991 BS 5386-6:1991. Specification for gas burning appliances. Specification for domestic gas cooking appliances with forced-convection ovens
BS 7387:1991 BS 7387:1991. Method for determination of the bulking thickness, apparent bulk density, compressibility and compressibility index of soft creped tissue paper
BS 1139-2.2:1991 BS 1139-2.2:1991. Metal scaffolding. Couplers. Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding
BS 3914:1991 BS 3914:1991. Specification for non-refillable metal aerosol dispensers of 50 ml to 1400 ml capacity and up to 85 mm diameter
BS 5131-2.10:1991 BS 5131-2.10:1991. Methods of test for footwear and footwear materials. Solings. Heat shrinkage of cellular solings
BS 5131-3.6:1991 BS 5131-3.6:1991. Methods of test for footwear and footwear materials. Uppers, textiles and threads. Abrasion resistance of shoe laces
BS 5131-3.7:1991 BS 5131-3.7:1991. Methods of test for footwear and footwear materials. Uppers, textiles and threads. Breaking strength of shoe laces
BS 5131-5.6:1991 BS 5131-5.6:1991. Methods of test for footwear and footwear materials. Testing of complete footwear. Impact test for rigid units and shoe bottoms
BS 6829-0:1991 BS 6829-0:1991. Analysis of surface active agents (raw materials). General introduction
BS 7044-4:1991 BS 7044-4:1991. Artificial sports surfaces. Specification for surfaces for multi-sports use
BS EN 2070-4:1991 BS EN 2070-4:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube for structures
BS EN 2070-5:1991 BS EN 2070-5:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube used under pressure
BS EN 2070-6:1991 BS EN 2070-6:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Rivet wire
BS EN 2070-7:1991 BS EN 2070-7:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Wrought forging stock
BS EN 2076-1:1991 BS EN 2076-1:1991. Aluminium and magnesium alloy ingots and castings. Technical specification. General requirements
BS EN 2076-2:1991 BS EN 2076-2:1991. Aluminium and magnesium alloy ingots and castings. Technical specification. Ingots for remelting
BS EN 2076-3:1991 BS EN 2076-3:1991. Aluminium and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings
BS EN 2082-1:1991 BS EN 2082-1:1991. Specification for aluminium alloy forging stock and forgings. Technical specification. General requirements
BS EN 2082-2:1991 BS EN 2082-2:1991. Specification for aluminium alloy forging stock and forgings. Technical specification. Forging stock
BS EN 2082-3:1991 BS EN 2082-3:1991. Specification for aluminium alloy forging stock and forgings. Technical specification. Pre-production and production forgings
BS EN 10001:1991 BS EN 10001:1991. Definition and classification of pig-irons
BS CECC 68100:1991 BS CECC 68100:1991. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (capability approval)
BS 5F 49:1991 BS 5F 49:1991. Specification for shuttle woven cotton webbing for aerospace purposes
BS 6F 55:1991 BS 6F 55:1991. Specification for 345 g/m2 and 415 g/m2 cotton canvas fabrics suitable for aerospace purposes
BS F 151:1991 BS F 151:1991. Specification for shuttleless woven cotton webbing for aerospace purposes
BS 1715-1:1991 BS 1715-1:1991. Analysis of soaps. General introduction, sampling, and test for presence of synthetic anionic-active surface active agents
BS 3F 111:1991 BS 3F 111:1991. Specification for flax harness webbing for aerospace purposes
BS 5131-2.1:1991 BS 5131-2.1:1991. Methods of test for footwear and footwear materials. Solings. Ross flexing method for cut growth resistance of soling materials
BS 4285-1.1:1991 BS 4285-1.1:1991. Microbiological examination for dairy purposes. Guide to general procedures. Sampling and preparation of samples
BS 4285-3.2:1991 BS 4285-3.2:1991. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of thermoduric bacteria
BS 7141-2:1991 BS 7141-2:1991. Narrow fabrics. Specification for cotton webbings for personal load carrying purposes
BS 3456-102.71:1991 BS 3456-102.71:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Dispensing appliances for food, drink and packaged consumer products
BS 7384:1991 BS 7384:1991. Guide to laboratory methods for sampling and analysis of particulate matter generated by arc welding consumables
BS 2769-2.12:1991 BS 2769-2.12:1991. Hand-held electric motor-operated tools. Particular requirements. Specification for chain saws
BS 3887:1991 BS 3887:1991. Specification for pressure sensitive adhesive closing and sealing tapes
BS 4848:Part 2:1991 BS 4848:Part 2:1991. Hot-rolled structural steel sections. Specification for hot-finished hollow sections
BS 5666-7:1991 BS 5666-7:1991. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of preservatives containing bis(tri-n-butyltin)oxide : determination of total tin
BS 6715:1991 BS 6715:1991. Specification for chamois leather
BS 7367:1991 BS 7367:1991. Specification for manufacture of glass bottles for carbonated soft drinks including carbonated water
BS 7394:Part 1:1991 BS 7394:Part 1:1991. Complete spectacles. Specification for ready-to-wear near-vision spectacles
BS EN 61036:1993 BS EN 61036:1993. Alternating current static watt-hour meters for active energy (classes 1 and 2)
BS 7406:1991, ISO 9932:1990 BS 7406:1991, ISO 9932:1990. Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods
BS 7410:1991, ISO 9045:1990 BS 7410:1991, ISO 9045:1990. Glossary of terms used in industrial screening
DD 195-1:1991 DD 195-1:1991. Hydraulic couplings. Method of test for coupling port threads and their seals intended for use in fluid power systems
BS EN 10036:1991 BS EN 10036:1991. Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
BS EN 10071:1991 BS EN 10071:1991. Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method
BS EN 10136:1991 BS EN 10136:1991. Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method
BS EN 24937:1991, ISO 4937:1986 BS EN 24937:1991, ISO 4937:1986. Steel and iron. Determination of chromium content. Potentiometric or visual titration method
BS 2543:1991 BS 2543:1991. Specification for woven and knitted fabrics for upholstery
BS 3100:1991 BS 3100:1991. Specification for steel castings for general engineering purposes
BS 4467:1991 BS 4467:1991. Guide to dimensions in designing for elderly people
BS 6764:1991, ISO 8817:1990 BS 6764:1991, ISO 8817:1990. Specification for habitation and stability requirements for leisure accommodation vehicles: leisure homes
BS 3456:Part 202:Section 202.7:1991, EN 60335-2-7:1990 BS 3456:Part 202:Section 202.7:1991, EN 60335-2-7:1990. Specification for safety of household and similar electrical appliances. Particular requirements. Washing machines
BS ISO/IEC 9281-2:1990 BS ISO/IEC 9281-2:1990. Information technology. Picture coding methods. Procedure for registration
BS ISO 2110:1989 BS ISO 2110:1989. Information technology. Data communication. 25-pole DTE/DCE interface connector and contact number assignments
BS 2000:Part 105:1991 BS 2000:Part 105:1991. Methods of test for petroleum and its products. Recovery of bituminous binders by dichloromethane extraction
BS 7044-2.5:1991 BS 7044-2.5:1991. Artificial sports surfaces. Methods of test. Miscellaneous
BS 7141-1:1991 BS 7141-1:1991. Narrow fabrics. Specification for polyamide and polyolefin woven tapes and webbings
BS 4196-8:1991, ISO 6926:1990 BS 4196-8:1991, ISO 6926:1990. Sound power levels of noise sources. Specification for the performance and calibration of reference sound sources
BS 3603:1991 BS 3603:1991. Specification for carbon and alloy steel pipes and tubes with specified low temperature properties for pressure purposes
DD 195-2:1991 DD 195-2:1991. Hydraulic couplings. Method of test for couplings intended for use in fluid power systems
BS 5131-1.3:1991 BS 5131-1.3:1991. Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests
BS 5666-3:1991 BS 5666-3:1991. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of preservatives and treated timber containing copper/chromium/arsenic formulations
BS 6913-6:1991, ISO 9247:1990 BS 6913-6:1991, ISO 9247:1990. Operation and maintenance of earth-moving machinery. Specification for identification and marking of electrical wires and cables
DD 181:1991 DD 181:1991. Techniques for using standard generalized markup language (SGML)
BS 4046:1991 BS 4046:1991. Specification for compressed straw building slabs
BS 490-3:1991 BS 490-3:1991. Conveyor and elevator belting. Specification for flammability and anti-static properties of rubber and of plastics conveyor belting of textile construction for general use
BS 3379:1991 BS 3379:1991. Specification for flexible polyurethane cellular materials for loadbearing applications
BS 5559:1991, EN 60445:1990,IEC 60445:1988 BS 5559:1991, EN 60445:1990,IEC 60445:1988. Specification for identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system
BS 6263-2:1991 BS 6263-2:1991. Care and maintenance of floor surfaces. Code of practice for resilient sheet and tile flooring
BS ISO 9041-1:1990 BS ISO 9041-1:1990. Information technology. Open systems interconnection. Virtual terminal basic class protocol. Specification
BS ISO/IEC 8208:1990 BS ISO/IEC 8208:1990. Information technology. Data communications. X.25 packet layer protocol for data terminal equipment
BS ISO/IEC 9593-3:1990 BS ISO/IEC 9593-3:1990. Information technology. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS) language bindings. Ada
BS EN 29506-1:1995 BS EN 29506-1:1995. Industrial automation systems. Manufacturing message specification. Service definition
BS ISO/IEC 9593-1:1990 BS ISO/IEC 9593-1:1990. Information technology. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS) language bindings. FORTRAN
BS 6068:Part 1:Section 1.7:1991, ISO 6107-7:1990 BS 6068:Part 1:Section 1.7:1991, ISO 6107-7:1990. Water quality. Glossary. An additional 47 terms
BS 7335-2:1991 BS 7335-2:1991. Installation of monolithic refractories. Code of practice for installation by gunning
BS 7372-1:1991, ISO 4783-1:1989 BS 7372-1:1991, ISO 4783-1:1989. Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth. General
BS 7372-2:1991, ISO 4783-2:1989 BS 7372-2:1991, ISO 4783-2:1989. Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth. Preferred combinations for woven wire cloth
BS EN 61023:1993, IEC 61023:1990 BS EN 61023:1993, IEC 61023:1990. Marine speed and distance measuring equipment (SDME). Operational and performance requirements. Methods of testing and required test results
BS ISO/IEC 8881:1989 BS ISO/IEC 8881:1989. Information processing systems. Data communications. Use of the X.25 packet level protocol in local area networks
BS ISO/IEC 9549:1990 BS ISO/IEC 9549:1990. Information technology. Galvanic isolation of balanced interchange circuits
BS ISO/IEC TR 9575:1990 BS ISO/IEC TR 9575:1990. Information technology. Telecommunications and information exchange between systems. OSI routeing framework
BS ISO/IEC 10022:1990 BS ISO/IEC 10022:1990. Information technology. Open systems interconnection. Physical service definition
BS 47-1:1991 BS 47-1:1991. Fishplates for railway rails. Specification for rolled steel fishplates
BS 490:Part 11:Section 11.3:1991 BS 490:Part 11:Section 11.3:1991. Conveyor and elevator belting. Methods of test for safety. Drum friction tests
BS 1902-11:1991 BS 1902-11:1991. Methods of testing refractory materials. Refractory mortars and putties
BS 4124:1991 BS 4124:1991. Methods for ultrasonic detection of imperfections in steel forgings
BS 5131-1.1:1991 BS 5131-1.1:1991. Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to heat (creep test)
BS 6083-3:1991, IEC 60118-3:1983 BS 6083-3:1991, IEC 60118-3:1983. Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aid equipment not entirely worn on the listener
BS ISO 9282-1:1988 BS ISO 9282-1:1988. Information processing. Coded representation of pictures. Encoding principles for picture representation in a 7-bit or 8-bit environment
BS 490-11.2:1991 BS 490-11.2:1991. Conveyor and elevator belting. Methods of test for safety. Low energy and high energy propane gallery tests
BS 3935:1991 BS 3935:1991. Guide to classification and marking of cattle hides and calfskins
BS 5055:1991 BS 5055:1991. Specification for elastomer-insulated cables for electric signs and high-voltage luminous-discharge-tube installations
BS 5139:1991 BS 5139:1991. Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion
BS 5815-3:1991 BS 5815-3:1991. Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector. Specification for counterpanes and continental quilt secondary covers including flammability performance
BS 7165:1991 BS 7165:1991. Recommendations for achievement of quality in software
BS 7388:1991 BS 7388:1991. Guide for prevention of leaks from hydraulic fluid power systems
BS 8215:1991 BS 8215:1991. Code of practice for design and installation of damp-proof courses in masonry construction
BS EN 21564:1991, ISO 1564:1976 BS EN 21564:1991, ISO 1564:1976. Specification for dental agar impression material
BS 6410:1991 BS 6410:1991. Methods of test for filter papers
BS 6779-2:1991 BS 6779-2:1991. Highway parapets for bridges and other structures. Specification for vehicle containment parapets of concrete construction
BS 6974:1991 BS 6974:1991. Specification for unsintered PTFE tape for thread sealing applications (coarse threads)
BS 7353:1991 BS 7353:1991. Methods of measuring quality of output of graphic COM recorders
BS 7379:1991 BS 7379:1991. Specification for plastics/metal laminate collapsible tubes
BS 7398:1991 BS 7398:1991. Specification for hand hacksaw frames
BS EN 27816-1:1991, ISO 7816-1:1987 BS EN 27816-1:1991, ISO 7816-1:1987. Guide to design and use of identification cards having integrated circuits with contacts. Physical characteristics
BS EN 27816-2:1991, ISO 7816-2:1988 BS EN 27816-2:1991, ISO 7816-2:1988. Guide to design and use of identification cards having integrated circuits with contacts. Contact locations and minimum size
BS 905-2:1991, EN 55020:1988 BS 905-2:1991, EN 55020:1988. Sound and television broadcast receivers and associated equipment: electromagnetic compatibility. Specification for immunity from radio interference of broadcast receivers and associated equipment
BS G 246:1991 BS G 246:1991. Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
BS EN 27810:1991, ISO 7810:1985 BS EN 27810:1991, ISO 7810:1985. Guide to design, construction and use of identification cards
BS 559:1991 BS 559:1991. Specification for electric signs and high-voltage luminous-discharge-tube installations
BS 7373:1991 BS 7373:1991. Guide to the preparation of specifications
BS EN 50059:1991 BS EN 50059:1991. Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
BS 6899:1991 BS 6899:1991. Specification for rubber insulation and sheath of electric cables
BS 1133-6.1:1991 BS 1133-6.1:1991. Packaging code. Protection of metal surfaces against corrosion during transport and storage. Cleaning and drying of metal surfaces
BS 1133-6.2:1991 BS 1133-6.2:1991. Packaging code. Protection of metal surfaces against corrosion during transport and storage. Temporary protectives and their application
BS 6221-23:1991 BS 6221-23:1991. Printed wiring boards. Guide for the design and use of printed wiring boards: surface mounted devices
BS 5724-2.1.1:1991 BS 5724-2.1.1:1991. Medical electrical equipment. Particular requirements for safety. Revised and additional text
BS 7421:1991, ISO 5350-2:1990 BS 7421:1991, ISO 5350-2:1990. Method for estimation of dirt and shives in bleached pulp
BS CECC 30700:1991 BS CECC 30700:1991. Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors of ceramic dielectric, class 2
BS ISO 9040:1990 BS ISO 9040:1990. Information technology. Open systems interconnection. Virtual terminal basic class service
BS 3087-11:1991, ISO 9343:1988 BS 3087-11:1991, ISO 9343:1988. Pliers and nippers. Specification for dimensions and test values of slip joint pliers
BS 3087-12:1991, ISO 9242:1988 BS 3087-12:1991, ISO 9242:1988. Pliers and nippers. Specification for dimensions and test values of construction worker's pincers
BS 3087-13:1991, ISO 9243:1988 BS 3087-13:1991, ISO 9243:1988. Pliers and nippers. Specification for dimensions and test values of carpenter's pincers
BS 3087-14:1991, ISO 8976:1988 BS 3087-14:1991, ISO 8976:1988. Pliers and nippers. Specification for dimensions and test values of multiple slip joint pliers
BS 7425-1:1991, ISO 9136:1989 BS 7425-1:1991, ISO 9136:1989. Abrasive grains. Method for the determination of the bulk density of macrograins
BS ISO/IEC 9804:1990 BS ISO/IEC 9804:1990. Information technology. Open Systems Interconnection. Service definition for the commitment, concurrency and recovery service element
BS 4009:1991, IEC 60373:1990 BS 4009:1991, IEC 60373:1990. Specification for artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers
BS EN ISO 8420:1995, BS 684-2.45:1991 BS EN ISO 8420:1995, BS 684-2.45:1991. Animal and vegetable fats and oils. Determination of polar compounds content
BS 1133-10.2:1991 BS 1133-10.2:1991. Packaging code. Metal containers. Metal drums
BS 1841:Part 1:1991, ISO 730-1:1990 BS 1841:Part 1:1991, ISO 730-1:1990. Rear-mounted, three-point linkage on agricultural wheeled tractors. Specification for categories 1, 2 and 3
BS 4727-1:Group 07:1991, IEC 60050-221:1990 BS 4727-1:Group 07:1991, IEC 60050-221:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Magnetic materials and components
BS 5685-8:1991 BS 5685-8:1991. Electricity meters. Specification for impulse operated multiple registers for use with induction electricity meters
BS 6207:1991 BS 6207:1991. Specification for mineral-insulated copper-sheathed cables with copper conductors
BS 6912-4:1991, ISO 10264:1990 BS 6912-4:1991, ISO 10264:1990. Safety of earth-moving machinery. Specification for key-locked starting systems
BS 7340:1991, ISO 9770:1989 BS 7340:1991, ISO 9770:1989. Schedule for compressibility factors for petroleum hydrocarbons in the density range 638 kg/m3 to 1074 kg/m3
BS EN 60420:1993, IEC 60420:1990 BS EN 60420:1993, IEC 60420:1990. Specification for high-voltage alternating current switch-fuse combinations
BS 7427:1991, ISO 5647:1990 BS 7427:1991, ISO 5647:1990. Method for determination of titanium dioxide content of paper and board
BS 7369:1991 BS 7369:1991. Specification for multi-frequency tone signalling protocol for social alarm systems
BS ISO/IEC 9805:1990 BS ISO/IEC 9805:1990. Information technology. Open systems interconnection. Protocol specification for the commitment, concurrency and recovery service element
BS 4727-2:Group 13:1991, IEC 60050-426:1990 BS 4727-2:Group 13:1991, IEC 60050-426:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electrical apparatus for explosive atmospheres
BS 4727-2:Group 14:1991, IEC 60050-436:1990 BS 4727-2:Group 14:1991, IEC 60050-436:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Power capacitors
BS 4727-2:Group 15:1991, IEC 60050-466:1990 BS 4727-2:Group 15:1991, IEC 60050-466:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Overhead lines
BS 5763-14:1991, ISO 8914:1990 BS 5763-14:1991, ISO 8914:1990. Methods for microbiological examination of food and animal feeding stuffs. Detection of Vibrio parahaemolyticus
BS 6203:1991 BS 6203:1991. Guide to fire characteristics and fire performance of expanded polystyrene materials used in building applications
BS 4J 11:1991 BS 4J 11:1991. Specification for pressure-sensitive adhesive paper masking tape
BS EN ISO 542:1995 BS EN ISO 542:1995. Oilseeds. Sampling
BS 4196-1:1991, EN 23741:1991,ISO 3741:1988 BS 4196-1:1991, EN 23741:1991,ISO 3741:1988. Sound power levels of noise sources. Precision methods for determination of sound power levels for broad-band sources in reverberation rooms
BS 4196-2:1991, EN 23742:1991,ISO 3742:1988 BS 4196-2:1991, EN 23742:1991,ISO 3742:1988. Sound power levels of noise sources. Precision methods for determination of sound power levels for discrete-frequency and narrow-band sources in reverberation rooms
BS 4727-1:Group 09:1991, IEC 60050-161:1990 BS 4727-1:Group 09:1991, IEC 60050-161:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Electromagnetic compatibility
BS 4727-1:Group 11:1991, IEC 60194:1988 BS 4727-1:Group 11:1991, IEC 60194:1988. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Printed circuits
BS 6712-2:1991, ISO 8226-2:1990 BS 6712-2:1991, ISO 8226-2:1990. Measurement of hygroexpansivity of paper and board. Method for measurement of hygroexpansivity up to a maximum relative humidity of 86%
BS 7228-2:1991, EN 29787:1992,ISO 9787:1990 BS 7228-2:1991, EN 29787:1992,ISO 9787:1990. Industrial robots. Guide to definitions of coordinate systems and motions
BS 7399:1991 BS 7399:1991. Method for determination of delamination force of textile floor coverings
BS 1000[65/651+657/659]:1991 BS 1000[65/651+657/659]:1991. Universal Decimal Classification. English full edition. Management and organization of industry and commerce
BS 4727-2:Group 04:1991, IEC 60050-421:1990 BS 4727-2:Group 04:1991, IEC 60050-421:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Power transformers and reactors
BS 4727-1:Group 10:1991, IEC 60050-212:1990 BS 4727-1:Group 10:1991, IEC 60050-212:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Insulating solids, liquids and gases
BS ISO/IEC 9983:1989, EN 29983:1991 BS ISO/IEC 9983:1989, EN 29983:1991. Information processing systems. Designation of unrecorded flexible disk cartridges
BS 4125:1991 BS 4125:1991. Specification for safety requirements for child safety barriers for domestic use
BS 4376-1:1991 BS 4376-1:1991. Electrically operated blood storage refrigerators. Specification for closed reach-in types
BS 5597:1991 BS 5597:1991. Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity
BS 6906-5:1991 BS 6906-5:1991. Methods of test for geotextiles. Determination of creep
BS 7359:1991 BS 7359:1991. Nomenclature of commercial timbers including sources of supply
BS 7407:1991 BS 7407:1991. Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children
BS ISO/IEC 10021-3:1990 BS ISO/IEC 10021-3:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Abstract service definition conventions
BS 6906-8:1991 BS 6906-8:1991. Methods of test for geotextiles. Determination of sand-geotextile frictional behaviour by direct shear
BS 1660-11:1991 BS 1660-11:1991. Machine tapers. Specification for gauges
BS 4863:1991 BS 4863:1991. Specification for safety requirements for playpens for domestic use
BS 4997:1991 BS 4997:1991. Specification for wooden axilla crutches
BS 7177:1991 BS 7177:1991. Specification for resistance to ignition of mattresses, divans and bed bases
BS 5173:Part 102:Section 102.1:1991 BS 5173:Part 102:Section 102.1:1991. Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Hydrostatic tests
BS 7403:Part 8:1991, ISO 4548-8:1989 BS 7403:Part 8:1991, ISO 4548-8:1989. Full-flow lubricating oil filters for internal combustion engines. Method of test for inlet anti-drain valves
BS 7412:1991 BS 7412:1991. Specification for plastics windows made from PVC-U extruded hollow profiles
BS CECC 31600:1991 BS CECC 31600:1991. Harmonized system of quality assessment for electronic components: sectional specification. Fixed capacitors with paper and paper/plastics dielectrics
BS 7413:1991 BS 7413:1991. Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type A
BS 7414:1991 BS 7414:1991. Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
BS ISO/IEC 9594-8:1990 BS ISO/IEC 9594-8:1990. Information technology. Open systems interconnection. Authentication framework
BS ISO/IEC 10021-1:1990 BS ISO/IEC 10021-1:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). System and service overview
BS ISO/IEC 10021-6:1990 BS ISO/IEC 10021-6:1990. Information technology. Message handling systems (MHS). Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Protocol specifications
BS ISO/IEC 10021-2:1990 BS ISO/IEC 10021-2:1990. Information technology. Message handling systems (MHS). Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Overall architecture
BS ISO/IEC 10021-4:1990 BS ISO/IEC 10021-4:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Message transfer system: abstract service definition and procedures
BS ISO/IEC 10021-7:1990 BS ISO/IEC 10021-7:1990. Information technology. Message handling systems (MHS). Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Interpersonal messaging system
BS 3517:1991, ISO 718:1990 BS 3517:1991, ISO 718:1990. Methods for thermal shock tests on laboratory glassware
BS 4317-26:1991, ISO 4112:1990 BS 4317-26:1991, ISO 4112:1990. Methods of test for cereals and pulses. Measurement of temperature of grain during bulk storage
BS 5690:1991 BS 5690:1991. Method for determination of abrasion resistance of fabrics
BS 6413-6:1991, ISO 6743-6:1990 BS 6413-6:1991, ISO 6743-6:1990. Lubricants, industrial oils and related products (class L). Classification for family C (gears)
BS 7228:Part 4:Section 4.1:1991, EN 29283:1992,ISO 9283:1990 BS 7228:Part 4:Section 4.1:1991, EN 29283:1992,ISO 9283:1990. Industrial robots. Performance criteria and testing. Methods for comprehensive testing
BS 7403-7:1991, ISO 4548-7:1990 BS 7403-7:1991, ISO 4548-7:1990. Full-flow lubricating oil filters for internal combustion engines. Method of test for vibration fatigue
BS 7409:1991 BS 7409:1991. Specification for safety requirements for wheeled child conveyances
BS 7424:1991, ISO 5628:1990 BS 7424:1991, ISO 5628:1990. Guide to general principles for determination of the bending stiffness of paper and board by static methods
BS 7432:1991, EN 29997:1992,ISO 9997:1990 BS 7432:1991, EN 29997:1992,ISO 9997:1990. Specification for dental cartridge syringes
BS CECC 90000:1991 BS CECC 90000:1991. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS 2011-2.1Kc:1991 BS 2011-2.1Kc:1991. Environmental testing. Tests. Test Kc and guidance. Sulphur dioxide test for contacts and connections
BS 7370-1:1991 BS 7370-1:1991. Grounds maintenance. Recommendations for establishing and managing grounds maintenance organizations and for design considerations related to maintenance
BS 7370-3:1991 BS 7370-3:1991. Grounds maintenance. Recommendations for maintenance of amenity and functional turf (other than sports turf)
BS 7419:1991 BS 7419:1991. Specification for holding down bolts
BS 7403-5:1991, ISO 4548-5:1990 BS 7403-5:1991, ISO 4548-5:1990. Full-flow lubricating oil filters for internal combustion engines. Method of test for cold start simulation and hydraulic pulse durability
BS 7403-6:1991, ISO 4548-6:1985 BS 7403-6:1991, ISO 4548-6:1985. Full-flow lubricating oil filters for internal combustion engines. Method of test for static burst pressure
BS 7403-13:1991, ISO 6415:1990 BS 7403-13:1991, ISO 6415:1990. Full-flow lubricating oil filters for internal combustion engines. Specification for dimensions of spin-on filters
BS 2646-4:1991 BS 2646-4:1991. Autoclaves for sterilization in laboratories. Guide to maintenance
BS 7431:1991, ISO 9808:1990 BS 7431:1991, ISO 9808:1990. Method for assessing solar water heaters. Elastomeric materials for absorbers, connecting pipes and fittings
BS ISO/IEC 9594-1:1990 BS ISO/IEC 9594-1:1990. Information technology. Open systems interconnection. Overview of concepts, models and services
BS ISO/IEC 9594-2:1990 BS ISO/IEC 9594-2:1990. Information technology. Open systems interconnection. Models
BS ISO/IEC 9594-3:1990 BS ISO/IEC 9594-3:1990. Information technology. Open systems interconnection. Abstract service definition
BS ISO/IEC 9594-4:1990 BS ISO/IEC 9594-4:1990. Information technology. Open systems interconnection. Procedures for distributed operation
BS ISO/IEC 9594-5:1990 BS ISO/IEC 9594-5:1990. Information technology. Open systems interconnection. Protocol specifications
BS ISO/IEC 9594-6:1990 BS ISO/IEC 9594-6:1990. Information technology. Open systems interconnection. Selected attribute types
BS ISO/IEC 9594-7:1990 BS ISO/IEC 9594-7:1990. Information technology. Open systems interconnection. Selected object classes
BS ISO/IEC 10021-5:1990 BS ISO/IEC 10021-5:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Message store: abstract service definition
BS 6250:Part 3:1991 BS 6250:Part 3:1991. Domestic and contract furniture. Specification for performance requirements for cabinet furniture
BS 5386-4:1991 BS 5386-4:1991. Specification for gas burning appliances. Built-in domestic cooking appliances
BS 5193:1991, ISO 6745:1990 BS 5193:1991, ISO 6745:1990. Specification for zinc phosphate pigments for paints
BS 5873-2:1991 BS 5873-2:1991. Educational furniture. Specification for strength and stability of chairs for educational institutions
BS 6250:Part 2:1991 BS 6250:Part 2:1991. Domestic and contract furniture. Specification for performance requirements for tables and trolleys
BS 7111:1991, ISO 8372:1987 BS 7111:1991, ISO 8372:1987. Guide to modes of operation for a 64-bit block cipher algorithm
BS 7428:1991, ISO 2624:1990 BS 7428:1991, ISO 2624:1990. Method for estimating the average grain size of copper and copper alloys
PP 666:1991 PP 666:1991. Language of labels
BS 2782:Part 4:Method 470A:1991, ISO 3451/1:1981 BS 2782:Part 4:Method 470A:1991, ISO 3451/1:1981. Methods of testing plastics. Chemical properties. Determination of ash (general methods)
BS 3087-10:1991 BS 3087-10:1991. Pliers and nippers. Specification for dimensions of tools not standardized by ISO
BS EN 29873:1994, ISO 9873:1990 BS EN 29873:1994, ISO 9873:1990. Requirements specification for reusable metal dental mirrors and handles
BS 5512:1991, ISO 281:1990 BS 5512:1991, ISO 281:1990. Method of calculating dynamic load ratings and rating life of rolling bearings
BS 5131-1.2:1991 BS 5131-1.2:1991. Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to peeling
BS 2782:Part 4:Method 470B:1991, ISO 3451/2:1984 BS 2782:Part 4:Method 470B:1991, ISO 3451/2:1984. Methods of testing plastics. Chemical properties. Determination of ash of polyalkylene terephthalates
BS 2782-4:Method 470C:1991, ISO 3451-3:1984 BS 2782-4:Method 470C:1991, ISO 3451-3:1984. Methods of testing plastics. Chemical properties. Determination of ash of unplasticized cellulose acetate
BS EN ISO 8780-1:1995 BS EN ISO 8780-1:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Introduction
BS EN ISO 8780-2:1995 BS EN ISO 8780-2:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an oscillatory shaking machine
BS EN ISO 8780-3:1995 BS EN ISO 8780-3:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a high speed impeller mill
BS EN ISO 8780-4:1995 BS EN ISO 8780-4:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill
BS EN ISO 8780-5:1995 BS EN ISO 8780-5:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an automatic muller
BS EN ISO 8780-6:1995 BS EN ISO 8780-6:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a triple-roll mill
BS EN ISO 8781-1:1995 BS EN ISO 8781-1:1995. Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the charge in tinting strength of coloured pigments
BS EN ISO 8781-2:1995 BS EN ISO 8781-2:1995. Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in fineness of grind
BS EN ISO 8781-3:1995 BS EN ISO 8781-3:1995. Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in gloss
BS L 173:1991 BS L 173:1991. Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
BS L 174:1991 BS L 174:1991. Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)
BS 6101-2:1991 BS 6101-2:1991. Machine tool ball screws. Specification for accuracy, including geometrical tests
BS EN 61041-1:1995, BS 7434-1:1991,IEC 61041-1:1990 BS EN 61041-1:1995, BS 7434-1:1991,IEC 61041-1:1990. Non-broadcast video tape recorders. Methods of measurement. General video (NTSC/PAL) and audio (longitudinal) characteristics
BS 6840-17:1991, IEC 60268-17:1990 BS 6840-17:1991, IEC 60268-17:1990. Sound system equipment. Methods for specifying and measuring the characteristics of standard volume indicators
BS AU 238:1991, ISO 7227:1987 BS AU 238:1991, ISO 7227:1987. Glossary of terms for road vehicle lighting and light signalling devices
BS 7397:1991 BS 7397:1991. Methods of test for mattresses, bed bases and bed sets
BS ISO/IEC 8825:1990 BS ISO/IEC 8825:1990. Information technology. Open systems interconnection. Specification of basic encoding rules for abstract syntax notation one (ASN.1)
BS ISO/IEC 8571-5:1990 BS ISO/IEC 8571-5:1990. Information processing systems. Open systems interconnection. File transfer, access and management. Protocol Implementation Conformance Statement Proforma
BS ISO/IEC 8824:1990 BS ISO/IEC 8824:1990. Information technology. Open systems interconnection. Specification of abstract syntax notation one (ASN.1)
BS EN 29171-1:1993 BS EN 29171-1:1993. Information technology. 130 mm optical disk cartridge, write once, for information interchange. Unrecorded optical disk cartridge
BS EN 29171-2:1993 BS EN 29171-2:1993. Information technology. 130 mm optical disk cartridge, write once, for information interchange. Recording format
BS AU 235-2:1991, ISO 8716:1988 BS AU 235-2:1991, ISO 8716:1988. Fifth wheel couplings for commercial vehicles. Method of testing strength of coupling pins
BS AU 241:1991, ISO 1726:1989 BS AU 241:1991, ISO 1726:1989. Specification for mechanical coupling between tractors and semi-trailers: interchangeability
BS 6498:1991 BS 6498:1991. Guide to preparation of microfilm and other microforms that may be required as evidence
BS AU 239:1991, ISO 8718:1988 BS AU 239:1991, ISO 8718:1988. Method of testing strength of drawbar couplings and eyes for hinged drawbars
BS ISO 8439:1990 BS ISO 8439:1990. Forms design. Basic layout
BS 2838-2:1991 BS 2838-2:1991. Examination and general treatment couches. Specification for variable height couches
BS 3908-9:1991 BS 3908-9:1991. Methods for the sampling and analysis of lead and lead alloys. Sulphur in lead and lead alloys
BS 5900:1991 BS 5900:1991. Specification for powered domestic lifts
BS 7152:1991 BS 7152:1991. Guide to choice of chemical disinfectants
BS 7411:1991 BS 7411:1991. Specification for lever operated knapsack sprayers
BS 7416:1991 BS 7416:1991. Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
BS 7417:1991 BS 7417:1991. Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
BS 7454:1991, IEC 60949:1988 BS 7454:1991, IEC 60949:1988. Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
BS 4285-4:1991 BS 4285-4:1991. Microbiological examination for dairy purposes. Methods for assessment of hygienic conditions
BS 1016-104.1:1991 BS 1016-104.1:1991. Methods for analysis and testing of coal and coke. Proximate analysis. Determination of moisture content of the general analysis sample of coal
BS 1016-104.2:1991 BS 1016-104.2:1991. Methods for analysis and testing of coal and coke. Determination of moisture content of the general analysis sample of coke
BS 1016:Part 104:Section 104.3:1991 BS 1016:Part 104:Section 104.3:1991. Methods for analysis and testing of coal and coke. Proximate analysis. Determination of volatile matter content
BS 1016:Part 104:Section 104.4:1991 BS 1016:Part 104:Section 104.4:1991. Methods for analysis and testing of coal and coke. Proximate analysis. Determination of ash
BS 5516:1991 BS 5516:1991. Code of practice for design and installation of sloping and vertical patent glazing
BS AU 195a:1991, ISO 4009:1989 BS AU 195a:1991, ISO 4009:1989. Specification for mounting electrical connections on rear cross members of towing vehicles
BS 7112:1991, ISO 9160:1988 BS 7112:1991, ISO 9160:1988. Procedures for achievement of interoperability and security by use of encipherment at the physical layer of OSI in telecommunication systems conveying automatic data processing information
BS 2G 210:1991 BS 2G 210:1991. Specification for PTFE insulated equipment wires and cables, single and multi-core, with silver plated copper conductors (190°C) or nickel plated copper conductors (260°C)
BS 2782-1:Method 130A:1991, ISO 182-1:1990 BS 2782-1:Method 130A:1991, ISO 182-1:1990. Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by the Congo red method
BS 7439:1991, ISO 9688:1990 BS 7439:1991, ISO 9688:1990. Method for exchange of information for the analytical assessment of shock resistance of mechanical systems
BS 142:Part 2:Section 2.3:1991, IEC 60255-8:1990 BS 142:Part 2:Section 2.3:1991, IEC 60255-8:1990. Electrical protection relays. Requirements for the principal families of protection relays. Specification for thermal electrical relays
BS 1674:1991 BS 1674:1991. Specification for equipment and general procedure for mixing and vulcanizing rubber test mixes
BS 4377:1991 BS 4377:1991. Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
BS 5241-2:1991 BS 5241-2:1991. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site. Specification for dispensed foam for thermal insulation or buoyancy applications
BS 5293-14:1991, ISO 3858-1:1990 BS 5293-14:1991, ISO 3858-1:1990. Sampling and testing carbon black for use in the rubber industry. Method for determination of light transmittance of toluene extract (rapid method)
BS 5293-15:1991, ISO 3858-2:1990 BS 5293-15:1991, ISO 3858-2:1990. Sampling and testing carbon black for use in the rubber industry. Method for determination of light transmittance of toluene extract for product evaluation
BS 5293-7:1991, ISO 1125:1990 BS 5293-7:1991, ISO 1125:1990. Sampling and testing carbon black for use in the rubber industry. Method for determination of ash content
BS 5510:1991, ISO 3965:1990 BS 5510:1991, ISO 3965:1990. Methods for determination of maximum speeds of agricultural wheeled tractors
BS 5550-7.2.6:1991, ISO 2910:1990 BS 5550-7.2.6:1991, ISO 2910:1990. Cinematography. Production and presentation. Screens and screen luminance. Specification for screen luminance and colour for the projection of motion-picture prints in indoor theatres and review rooms
BS 5672:1991, ISO 1204:1990 BS 5672:1991, ISO 1204:1990. Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
BS 5731:1991, ISO 8935:1990 BS 5731:1991, ISO 8935:1990. Specification for mountings and apertures for external equipment controls on agricultural and forestry tractors
BS 6068-6.6:1991, ISO 5667-6:1990 BS 6068-6.6:1991, ISO 5667-6:1990. Water quality. Sampling. Guidance on sampling of rivers and streams
BS 6069-3.2:1991, ISO 8518:1990 BS 6069-3.2:1991, ISO 8518:1990. Characterization of air quality. Workplace atmospheres. Method for the determination of particulate lead and lead compounds by flame atomic absorption spectrometry
BS 6100-1.3.6:1991 BS 6100-1.3.6:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Jointing products, builders' hardware and accessories
BS 3900-A5:1991 BS 3900-A5:1991. Methods of test for paints. Large-scale brushing tests for paints and varnishes
BS 5226:1991 BS 5226:1991. Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations
BS 6686:Part 2:Section 2.5:1991, IEC 60704-2-5:1989 BS 6686:Part 2:Section 2.5:1991, IEC 60704-2-5:1989. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Room heaters of the storage type
BS 7164-5:1991, ISO 247:1990 BS 7164-5:1991, ISO 247:1990. Chemical tests for raw and vulcanized rubber. Methods for determination of ash content
BS 7164-27.1:1991, ISO 6101-5:1990 BS 7164-27.1:1991, ISO 6101-5:1990. Chemical tests for raw and vulcanized rubber. Methods for determination of iron content. Atomic absorption spectrometry
BS 7425-2:1991, ISO 9137:1990 BS 7425-2:1991, ISO 9137:1990. Abrasive grains. Method for determining the capillarity
BS 7440:1991, ISO 9059:1990 BS 7440:1991, ISO 9059:1990. Method for calibrating field pyrheliometers by comparison to a reference pyrheliometer
BS 7228:Part 3:1991, EN 29946:1992,ISO 9946:1991 BS 7228:Part 3:1991, EN 29946:1992,ISO 9946:1991. Industrial robots. Specification for the presentation of characteristics by the manufacturer
BS 3202-1:1991 BS 3202-1:1991. Laboratory furniture and fittings. Introduction
BS 5925:1991 BS 5925:1991. Code of practice for ventilation principles and designing for natural ventilation
BS 3202-3:1991 BS 3202-3:1991. Laboratory furniture and fittings. Recommendations for design
BS 3202-4:1991 BS 3202-4:1991. Laboratory furniture and fittings. Recommendations for installation
BS 718:1991 BS 718:1991. Specification for density hydrometers
BS 3502-1:1991, ISO 1043-1:1987 BS 3502-1:1991, ISO 1043-1:1987. Symbols for plastics and rubber materials. Schedule for symbols for plastics
BS 3502:Part 2:1991 BS 3502:Part 2:1991. Symbols for plastics and rubber materials. Schedule for symbols for rubbers
BS 3762-0:1991 BS 3762-0:1991. Analysis of formulated detergents. General introduction
BS 6001-1:1991, ISO 2859-1:1989 BS 6001-1:1991, ISO 2859-1:1989. Sampling procedures for inspection by attributes. Specification for sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
BS EN 141:1991 BS EN 141:1991. Specification for gas filters and combined filters used in respiratory protective equipment
BS EN 60335-2-25:1991 BS EN 60335-2-25:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Microwave ovens
BS EN 2495:1991 BS EN 2495:1991. Specification for single-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard
BS EN 2350:1991 BS EN 2350:1991. Circuit breakers. Technical specification
BS EN 60335-2-3:1991 BS EN 60335-2-3:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Electric irons
BS 6349-5:1991 BS 6349-5:1991. Maritime structures. Code of practice for dredging and land reclamation
BS 6762-2:1991 BS 6762-2:1991. Services for leisure accommodation vehicles and transportable accommodation units. Code of practice for the installation of solid fuel fired heating in park homes and transportable accommodation units
BS 7420:1991 BS 7420:1991. Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
BS EN 27493:1991, ISO 7493:1985 BS EN 27493:1991, ISO 7493:1985. Specification for dental operator's stool
BS 1425-2:1991 BS 1425-2:1991. Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles. Specification for feather and/or down fillings and stuffings
BS 3087-1:1991 BS 3087-1:1991. Pliers and nippers. General introduction
BS 5537:1991 BS 5537:1991. Guide to forms design sheet and layout chart
BS 7335-1:1991 BS 7335-1:1991. Installation of monolithic refractories. Code of practice for installation by casting
BS 7438:1991 BS 7438:1991. Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 2782:Part 3:Method 365D:1991 BS 2782:Part 3:Method 365D:1991. Methods of testing plastics. Mechanical properties. Determination of hardness by the ball indentation method
BS 6100-1.3.0:1991 BS 6100-1.3.0:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. External works
BS 6230:1991 BS 6230:1991. Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd family gases)
BS EN 29318-2:1995 BS EN 29318-2:1995. Information technology. Intelligent Peripheral Interface. Device specific command set for magnetic disk drives
BS 6014:1991 BS 6014:1991. Specification for ethylene propylene rubber compounds
BS EN 2592:1991 BS EN 2592:1991. Specification for three-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard
BS 5845:1991 BS 5845:1991. Specification for permanent anchors for industrial safety belts and harnesses
BS 5154:1991 BS 5154:1991. Specification for copper alloy globe, globe stop and check, check and gate valves
BS 4443-6:1991 BS 4443-6:1991. Methods of test for flexible cellular materials. Method 14. Preparation of water extract. Method 15. Determination of tear strength. Method 16. Determination of air flow value
PP 7310:1990 PP 7310:1990. Anthropometrics: an introduction
BS EN 60926:1991 BS EN 60926:1991. Specification for general and safety requirements for starting devices (other than glow starters)
BS 3F 65:1991 BS 3F 65:1991. Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)
BS 3G 100-2.3.12:1991 BS 3G 100-2.3.12:1991. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Fluid contamination
BS 7433-2:1991 BS 7433-2:1991. Cross recessed machine screws. Specification for countersunk flat head screws product grade A and property class 4.8 only
BS 6833-5:1991 BS 6833-5:1991. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for the cordless elements within PBX apparatus with analogue interfaces to the PSTN and terminating stations treated as an entirety
BS 903:Part A46:1991, ISO 6179:1989 BS 903:Part A46:1991, ISO 6179:1989. Physical testing of rubber. Method for determination of the transmission rate of volatile liquids
BS 2M 54:1991 BS 2M 54:1991. Specification for temperature control in the heat treatment of metals
BS 3749:1991 BS 3749:1991. Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems
BS 6068-2.40:1991, ISO 9390:1990 BS 6068-2.40:1991, ISO 9390:1990. Water quality. Physical, chemical and biochemical methods. Method for the determination of borate by spectrometry using azomethine-H
DD 193:1991 DD 193:1991. Method for recovery of bitumen binders by dichloromethane extraction (rotary film evaporator method)
BS 1247-3:1991 BS 1247-3:1991. Manhole steps. Specification for aluminium manhole steps
BS 6726:1991 BS 6726:1991. Specification for festoon and temporary lighting cables and cords
BS EN 60427:1992, IEC 60427:1989 BS EN 60427:1992, IEC 60427:1989. Specification for synthetic testing of high-voltage alternating current circuit-breakers
BS ISO/IEC 8880-1:1990 BS ISO/IEC 8880-1:1990. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network service. General principles
BS ISO/IEC 8880-3:1990 BS ISO/IEC 8880-3:1990. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network service. Provision and support of the connectionless-mode Network Service
BS 1133-15:1991 BS 1133-15:1991. Packaging code. Tensional strapping
BS 5873:Part 4:1991 BS 5873:Part 4:1991. Educational furniture. Specification for strength and stability of storage furniture for educational institutions
BS 6221-2:1991, IEC 60326-2:1990 BS 6221-2:1991, IEC 60326-2:1990. Printed wiring boards. Methods of test
BS 1425-1:1991 BS 1425-1:1991. Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles. Specification for fillings and stuffings other than feather and/or down
BS 6102-11:1991, ISO 6699:1990 BS 6102-11:1991, ISO 6699:1990. Cycles. Specification for assembly dimensions for stem and handlebar bend
BS 6102-13:1991, ISO 10230:1990 BS 6102-13:1991, ISO 10230:1990. Cycles. Specification for mating dimensions for splined hub and sprocket
BS 7433-3:1991 BS 7433-3:1991. Cross recessed machine screws. Specification for raised countersunk head screws product grade A
BS 6913-7:1991, ISO 8927:1991 BS 6913-7:1991, ISO 8927:1991. Operation and maintenance of earth-moving machinery. Glossary for machine availability
BS 4269-2:1991, EN 21563:1991,ISO 1563:1990 BS 4269-2:1991, EN 21563:1991,ISO 1563:1990. Dental elastic impression material. Specification for alginate impression material
BS 6102-12:1991, ISO 8562:1990 BS 6102-12:1991, ISO 8562:1990. Cycles. Specification for stem wedge angle
BS 7269-1:1991 BS 7269-1:1991. Drycleanability of leather garments. Specification for drycleanability and for appropriate care labels
BS 7269-2:1991 BS 7269-2:1991. Drycleanability of leather garments. Method for assessing drycleanability
BS 7433-1:1991 BS 7433-1:1991. Cross recessed machine screws. Specification for pan head screws of product grade A
BS 7442-1:1991, ISO/TR 8517:1988 BS 7442-1:1991, ISO/TR 8517:1988. Rubber or plastics covered rollers. Glossary of terms
BS 4371:1991 BS 4371:1991. Specification for fibrous gland packings
BS 5722:1991 BS 5722:1991. Specification for flammability performance of fabrics and fabric combinations used in nightwear garments
BS 6100-1.5.5:1991 BS 6100-1.5.5:1991. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Plant and equipment
BS 7446:1991, ISO 3711:1990 BS 7446:1991, ISO 3711:1990. Specification for lead chromate pigments and lead chromate-molybdate pigments for paints
BS 3189:1991, ISO 9717:1990 BS 3189:1991, ISO 9717:1990. Method for specifying phosphate conversion coatings for metals
BS 5216:1991 BS 5216:1991. Specification for patented cold drawn steel wire for mechanical springs
BS 5724:Part 2:Section 2.119:1991, IEC 60601-2-19:1990 BS 5724:Part 2:Section 2.119:1991, IEC 60601-2-19:1990. Medical electrical equipment. Particular requirements for safety. Specification for baby incubators
BS EN 132:1991 BS EN 132:1991. Respiratory protective devices. Definitions
BS EN 133:1991 BS EN 133:1991. Respiratory protective devices. Classification
BS EN 134:1991 BS EN 134:1991. Respiratory protective devices. Nomenclature of components
BS EN 135:1991 BS EN 135:1991. Respiratory protective devices. List of equivalent terms
BS EN 60335-2-12:1991 BS EN 60335-2-12:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Warming plates and similar appliances
BS 1133-18:1991 BS 1133-18:1991. Packaging code. Packaging in glass
BS B 28:1991 BS B 28:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated (W) and precipitated)
BS B 29:1991 BS B 29:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard (W(1/4H)) and precipitated)
BS B 30:1991 BS B 30:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard (W(1/2H)) and precipitated)
BS B 31:1991 BS B 31:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard (W(H)) and precipitated)
BS B 32:1991 BS B 32:1991. Specification for copper-beryllium alloy rods, sections and parts (solution treated (W) and precipitated)
BS B 33:1991 BS B 33:1991. Specification for copper-beryllium alloy wire and springs (solution treated (W) and precipitated)
BS F 140:1991 BS F 140:1991. Glossary of parachute terms
BS 5411-8:1991, ISO 3497:1990 BS 5411-8:1991, ISO 3497:1990. Methods of test for metallic and related coatings. Measurement of coating thickness of metallic coatings: X-ray spectrometric methods
BS 303:1991, ISO 3710:1990 BS 303:1991, ISO 3710:1990. Specification for lead chrome green pigments for paints
BS EN 60249-2-15:1994, IEC 60249-2-15:1987 BS EN 60249-2-15:1994, IEC 60249-2-15:1987. Specifications. Flexible copper-clad polyimide film, of defined flammability
BS 5724:Part 2:Section 2.120:1991, IEC 60601-2-20:1990 BS 5724:Part 2:Section 2.120:1991, IEC 60601-2-20:1990. Medical electrical equipment. Particular requirements for safety. Specification for transport incubators
BS 7141-7:1991 BS 7141-7:1991. Narrow fabrics. Specification for woven cotton tapes and webbings
BS 7450:1991, IEC 61059:1991 BS 7450:1991, IEC 61059:1991. Method for determination of economic optimization of power cable size
BS 6388-1:1991, ISO 5630-1:1991 BS 6388-1:1991, ISO 5630-1:1991. Accelerated ageing of paper and board. Method for dry heat treatment at 105°C
BS 7418:1991 BS 7418:1991. Code of practice for isolation of the welding circuit in arc welding plant
BS X 32:1991 BS X 32:1991. Specification for pretreatment primer for aerospace purposes
BS X 33:1991 BS X 33:1991. Specification for two component epoxy primer for aerospace purposes
BS AU 50-1.6.3:1991, ISO 6054-1:1990 BS AU 50-1.6.3:1991, ISO 6054-1:1990. Tyres and wheels. Tyres. Motorcycle tyres. Specification for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres
BS EN 60335-2-26:1991 BS EN 60335-2-26:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Clocks
BS ISO/IEC TR 10037:1991 BS ISO/IEC TR 10037:1991. Information technology. SGML and Text-entry Systems. Guidelines for SGML Syntax-Directed Editing Systems
BS ISO/IEC 8802-4:1990 BS ISO/IEC 8802-4:1990. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Token-passing bus access method and physical layer specifications
BS ISO/IEC 10030:1990 BS ISO/IEC 10030:1990. Information technology. Telecommunications and information exchange between systems. End System Routeing Information Exchange Protocol for use in conjunction with ISO 8878
BS EN 29318-3:1994 BS EN 29318-3:1994. Information technology. Intelligent Peripheral Interface. Device generic command set for magnetic and optical disk drives
BS 1835:1991 BS 1835:1991. Specification for 2-ethylhexan-1-ol for industrial use
BS 6896:1991 BS 6896:1991. Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 3546-4:1991 BS 3546-4:1991. Coated fabrics for use in the manufacture of water penetration resistant clothing. Specification for water vapour permeable coated fabrics
BS EN 2070-3:1991 BS EN 2070-3:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Bar and section
BS 4583:1991 BS 4583:1991. Methods of test for higher alcohols for industrial use
BS 7423:1991 BS 7423:1991. Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
BS 5F 100:1991 BS 5F 100:1991. Procedure for inspection and testing of textiles for aerospace purposes
BS EN 29070:1993, ISO/IEC 9070:1991 BS EN 29070:1993, ISO/IEC 9070:1991. Information technology. SGML support facilities. Registration procedures for public text owner identifiers
BS 2056:1991 BS 2056:1991. Specification for stainless steel wire for mechanical springs
BS 6100-2.6:1991 BS 6100-2.6:1991. Glossary of building and civil engineering terms. Civil engineering. Natural waters. Inland. Coastal. Marine
BS 6883:1991 BS 6883:1991. Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units
BS 2782:Part 7:Method 732A:1991, ISO 1628-1:1984 BS 2782:Part 7:Method 732A:1991, ISO 1628-1:1984. Methods of testing plastics. Rheological properties. Determination of viscosity number:general conditions
BS 2782-7:Method 732B:1991, ISO 1628-2:1988 BS 2782-7:Method 732B:1991, ISO 1628-2:1988. Methods of testing plastics. Rheological properties. Determination of viscosity number of poly(vinyl chloride) resins
BS 2782:Part 7:Method 732E:1991, ISO 1628-5:1986 BS 2782:Part 7:Method 732E:1991, ISO 1628-5:1986. Methods of testing plastics. Rheological properties. Determination of viscosity number of poly(alkylene terephthalates)
BS 5502-51:1991 BS 5502-51:1991. Buildings and structures for agriculture. Code of practice for design and construction of slatted, perforated and mesh floors for livestock
BS 6200-1:1991 BS 6200-1:1991. Sampling and analysis of iron, steel and other ferrous metals. Introduction and contents
BS 6200-3.0:1991 BS 6200-3.0:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Summary of methods
BS 7404-1.2:1991, IEC 60870-1-2:1989 BS 7404-1.2:1991, IEC 60870-1-2:1989. Telecontrol equipment and systems. General considerations. Guide for specifications
BS EN 26848:1991, ISO 6848:1984 BS EN 26848:1991, ISO 6848:1984. Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding
BS 2782-7:Method 732F:1991, ISO 1628-6:1990 BS 2782-7:Method 732F:1991, ISO 1628-6:1990. Methods of testing plastics. Rheological properties. Determination of viscosity number of methyl methacrylate polymers
BS 7444:1991 BS 7444:1991. Specification for molecular sieves (of type 4A)
DD ENV 41005:1991 DD ENV 41005:1991. Method for the specification of basic and supplementary services of private telecommunication networks
DD ENV 41006:1991 DD ENV 41006:1991. Scenarios for interconnections between exchanges of private telecommunication networks
BS 2782:Part 7:Method 732D:1991, ISO 1628-4:1986 BS 2782:Part 7:Method 732D:1991, ISO 1628-4:1986. Methods of testing plastics. Rheological properties. Determination of viscosity number of polycarbonate moulding and extrusion materials
BS 3212:1991 BS 3212:1991. Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations
BS 7126:Part 101:1991 BS 7126:Part 101:1991. Urine collection bags. Specification for body-worn and non-body-worn bags
BS 7361-1:1991 BS 7361-1:1991. Cathodic protection. Code of practice for land and marine applications
BS EN 2586:1991 BS EN 2586:1991. Specification for washers, lock for flight control rods. Dimensions
BS F 138:1991 BS F 138:1991. Specification for polyester plain (bobbin) netting suitable for aerospace purposes
BS 6231:1990 BS 6231:1990. Specification for PVC-insulated cables for switchgear and controlgear wiring
BS 2769:Part 2:Section 2.5:1991 BS 2769:Part 2:Section 2.5:1991. Hand-held electric motor-operated tools. Particular requirements. Specification for circular saws and circular knives
BS 3531-23.1:1991, ISO 9585:1990 BS 3531-23.1:1991, ISO 9585:1990. Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
BS 5474:1991, ISO 2303:1990 BS 5474:1991, ISO 2303:1990. Method for evaluation of non-oil-extended solution-polymerized isoprene rubber (IR)
BS 6283-1:1991 BS 6283-1:1991. Safety and control devices for use in hot water systems. Specification for expansion valves for pressures up to and including 10 bar
BS 6283-2:1991 BS 6283-2:1991. Safety and control devices for use in hot water systems. Specifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-3:1991 BS 6283-3:1991. Safety and control devices for use in hot water systems. Specification for combined temperature and pressure relief valves for pressures from 1 bar to 10 bar
BS 6283-4:1991 BS 6283-4:1991. Safety and control devices for use in hot water systems. Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar
BS 7443:1991 BS 7443:1991. Specification for sound systems for emergency purposes
BS 7455-1:1991, ISO 7530-1:1990 BS 7455-1:1991, ISO 7530-1:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. General requirements and sample dissolution
BS 7455-2:1991, ISO 7530-2:1990 BS 7455-2:1991, ISO 7530-2:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of cobalt
BS 7455-3:1991, ISO 7530-3:1990 BS 7455-3:1991, ISO 7530-3:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of chromium
BS 7455-4:1991, ISO 7530-4:1990 BS 7455-4:1991, ISO 7530-4:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of copper
BS 7455-5:1991, ISO 7530-5:1990 BS 7455-5:1991, ISO 7530-5:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of iron
BS 7455-6:1991, ISO 7530-6:1990 BS 7455-6:1991, ISO 7530-6:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of manganese
BS 7458-1:1991, EN 21680-1:1991,ISO 1680-1:1986 BS 7458-1:1991, EN 21680-1:1991,ISO 1680-1:1986. Test code for the measurement of airborne noise emitted by rotating electrical machinery. Engineering method for free-field conditions over a reflecting plane
BS 7458-2:1991, EN 21680-2:1991,ISO 1680-2:1986 BS 7458-2:1991, EN 21680-2:1991,ISO 1680-2:1986. Test code for the measurement of airborne noise emitted by rotating electrical machinery. Survey method
BS 8213-1:1991 BS 8213-1:1991. Windows, doors and rooflights. Code of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods)
BS EN 60335-2-28:1991 BS EN 60335-2-28:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Sewing machines
BS 1742-4:1991 BS 1742-4:1991. Methods for chemical analysis of condensed milks. Determination of ash from condensed milks
BS 1742-5.2:1991 BS 1742-5.2:1991. Methods for chemical analysis of condensed milks. Determination of nitrogen content. Routine method
BS 4317-4:1991, ISO 605:1991 BS 4317-4:1991, ISO 605:1991. Methods of test for cereals and pulses. Determination of impurities, size, foreign odours, insects, and species and variety in pulses
BS 7445-1:1991, ISO 1996-1:1982 BS 7445-1:1991, ISO 1996-1:1982. Description and measurement of environmental noise. Guide to quantities and procedures
BS EN ISO 2789:1995 BS EN ISO 2789:1995. Information and documentation. International library statistics
BS 7463-1:1991, ISO 9184-1:1990 BS 7463-1:1991, ISO 9184-1:1990. Fibre furnish analysis of paper, board and pulps. General method
BS 7463-2:1991, ISO 9184-2:1990 BS 7463-2:1991, ISO 9184-2:1990. Fibre furnish analysis of paper, board and pulps. Guide to staining
BS 7463-3:1991, ISO 9184-3:1990 BS 7463-3:1991, ISO 9184-3:1990. Fibre furnish analysis of paper, board and pulps. Method of test by Herzberg stain
BS 7463-4:1991, ISO 9184-4:1990 BS 7463-4:1991, ISO 9184-4:1990. Fibre furnish analysis of paper, board and pulps. Method of test by Graff 'C' stain
BS 7463-5:1991, ISO 9184-5:1990 BS 7463-5:1991, ISO 9184-5:1990. Fibre furnish analysis of paper, board and pulps. Method of test by Lofton-Merritt stain (Wisbar modification)
BS EN 29316:1991, ISO 9316:1989 BS EN 29316:1991, ISO 9316:1989. Information processing systems. Small Computer System Interface (SCSI)
BS EN 60335-2-13:1991 BS EN 60335-2-13:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Frying pans, deep fat fryers and similar appliances
BS 5763-1:1991, ISO 4833:1991 BS 5763-1:1991, ISO 4833:1991. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of micro-organisms. Colony count technique at 30°C
BS 5763-2:1991, ISO 4832:1991 BS 5763-2:1991, ISO 4832:1991. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of coliforms. Colony count technique
BS 7445-2:1991, ISO 1996-2:1987 BS 7445-2:1991, ISO 1996-2:1987. Description and measurement of environmental noise. Guide to the acquisition of data pertinent to land use
BS 7445-3:1991, ISO 1996-3:1987 BS 7445-3:1991, ISO 1996-3:1987. Description and measurement of environmental noise. Guide to application to noise limits
DD 186:1991 DD 186:1991. Method for determination of threshold stress intensity factors and fatigue crack growth rates in metallic materials
BS 5268:Part 2:1991 BS 5268:Part 2:1991. Structural use of timber. Code of practice for permissible stress design, materials and workmanship
BS 5763-3:1991, ISO 4831:1991 BS 5763-3:1991, ISO 4831:1991. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of coliforms. Most probable number technique
BS EN 2374:1991 BS EN 2374:1991. Specification for glass fibre reinforcing mouldings and sandwich composites. Production of test panels
BS 1742-5.1:1991 BS 1742-5.1:1991. Methods for chemical analysis of condensed milks. Determination of nitrogen content. Reference method
BS 7435-1:1991 BS 7435-1:1991. Fibre cement flue pipes, fittings and terminals. Specification for light quality fibre cement flue pipes, fittings and terminals
BS 7435-2:1991 BS 7435-2:1991. Fibre cement flue pipes, fittings and terminals. Specification for heavy quality fibre cement flue pipes, fittings and terminals
BS 7452:1991, IEC 60989:1991 BS 7452:1991, IEC 60989:1991. Specification for separating transformers, autotransformers, variable transformers and reactors
BS EN 2070-1:1991 BS EN 2070-1:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. General requirements
BS EN 2070-2:1991 BS EN 2070-2:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Sheet, strip formed profiles and plate
BS EN 2243-2:1991 BS EN 2243-2:1991. Structural adhesives. Test methods. Peel metal-metal
BS ISO/IEC 9595:1991 BS ISO/IEC 9595:1991. Information technology. Open Systems Interconnection. Common management information service definition
BS 5766-14:1991, ISO 6654:1991 BS 5766-14:1991, ISO 6654:1991. Methods for analysis of animal feeding stuffs. Determination of urea content
DD 198:1991 DD 198:1991. Guide to assessment of reliability of systems containing software
BS 8216:1991 BS 8216:1991. Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
BS 3473-1:1991, ISO 695:1991 BS 3473-1:1991, ISO 695:1991. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali
BS 3482-1:1991 BS 3482-1:1991. Methods of test for desiccants. Sampling, and preparation and storage of test samples
BS 3482-2:1991 BS 3482-2:1991. Methods of test for desiccants. Determination of moisture content
BS 3482-3:1991 BS 3482-3:1991. Methods of test for desiccants. Determination of pH
BS 3482-4:1991 BS 3482-4:1991. Methods of test for desiccants. Determination of water-soluble chlorides content
BS 3482-5:1991 BS 3482-5:1991. Methods of test for desiccants. Determination of water-soluble sulphates content
BS 3482-7:1991 BS 3482-7:1991. Methods of test for desiccants. Determination of particle size
BS 3482-8:1991 BS 3482-8:1991. Methods of test for desiccants. Estimation of ammonia and ammonium compounds content
BS 3482-9:1991 BS 3482-9:1991. Methods of test for desiccants. Determination of cobalt chloride content
BS 3482-10:1991 BS 3482-10:1991. Methods of test for desiccants. Determination of bulk density (dry basis)
BS 3482-11:1991 BS 3482-11:1991. Methods of test for desiccants. Determination of friability and dust content
BS 5131-1.7:1991 BS 5131-1.7:1991. Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests
BS EN 60922:1991 BS EN 60922:1991. Specification for general and safety requirements for ballasts for discharge lamps (excluding tubular fluorescent lamps)
BS EN 60335-2-45:1991 BS EN 60335-2-45:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Portable electric heating tools and similar appliances
BS ISO/IEC 8441-1:1991 BS ISO/IEC 8441-1:1991. Information technology. High density digital recording (HDDR). Unrecorded magnetic tape for (HDDR) applications
BS EN 60335-2-15:1991 BS EN 60335-2-15:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Appliances for heating liquids
BS ISO/IEC TR 10176:1991 BS ISO/IEC TR 10176:1991. Information technology. Guidelines for the preparation of programming language standards
BS 3482-6:1991 BS 3482-6:1991. Methods of test for desiccants. Determination of adsorptive capacity
BS 1133-21:1991 BS 1133-21:1991. Packaging code. Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
BS 4409-1:1991 BS 4409-1:1991. Screw conveyors. Specification for fixed trough type
BS EN 26802:1993, ISO 6802:1991 BS EN 26802:1993, ISO 6802:1991. Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing
BS EN 27326:1993, ISO 7326:1991 BS EN 27326:1993, ISO 7326:1991. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS 6992:Part 2:1991 BS 6992:Part 2:1991. Capacities and related cross sections of open-top cans for food and drinks. Recommendations for cans for meat and meat products for human consumption
BS EN 2243-4:1991 BS EN 2243-4:1991. Structural adhesives. Test methods. Metal-honeycomb core flatwise tensile test
BS EN 60127-3:1991 BS EN 60127-3:1991. Miniature fuses. Specification for sub-miniature fuse-links
BS EN 60335-2-51:1991 BS EN 60335-2-51:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Stationary circulation pumps for heating and service water installations
BS EN 60923:1991 BS EN 60923:1991. Specification for performance requirements for ballasts for discharge lamps (excluding tubular fluorescent lamps)
BS EN 60924:1991 BS EN 60924:1991. Specification for general and safety requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
BS 7465:1991, ISO 6345:1990 BS 7465:1991, ISO 6345:1990. Glossary of terms for ships windows and side scuttles
BS 7466:1991, ISO 8385:1990 BS 7466:1991, ISO 8385:1990. Specification for dredgers
DD ENV 41511:1991 DD ENV 41511:1991. Information systems interconnection. Office document architecture (ODA). Document application profile. Layout independent documents. Simple messaging profile
BS 7467:1991, ISO 7463:1990 BS 7467:1991, ISO 7463:1990. Specification for symbols for computer applications in ship building and marine technology
BS 1016-107.1:1991 BS 1016-107.1:1991. Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of crucible swelling number
BS 1016-107.2:1991 BS 1016-107.2:1991. Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Assessment of caking power by Gray-King coke test
BS 1016:Part 108:Section 108.3:1991 BS 1016:Part 108:Section 108.3:1991. Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (small container)
BS 1016:Part 108:Section 108.4:1991 BS 1016:Part 108:Section 108.4:1991. Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (large container)
BS 5866-2:1991 BS 5866-2:1991. Blankets suitable for use in the public sector. Specification for cotton leno cellular blankets
BS 5866-3:1991 BS 5866-3:1991. Blankets suitable for use in the public sector. Specification for synthetic fibre cellular blankets
BS 5866-4:1991 BS 5866-4:1991. Blankets suitable for use in the public sector. Specification for flammability performance
BS 7402:1991 BS 7402:1991. Guide to specifying electronic typographic markup (SETM)
BS 1981:1991 BS 1981:1991. Specification for unified machine screws and machine screw nuts
BS 5551-2.8:1991, ISO 8358:1991 BS 5551-2.8:1991, ISO 8358:1991. Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
BS 4C 14:1991, ISO 45:1990 BS 4C 14:1991, ISO 45:1990. Specification for aircraft pressure refuelling connectors
BS 4301:1991 BS 4301:1991. Recommendations for preparation of drawings for optical elements and systems
BS 6069-4.2:1991 BS 6069-4.2:1991. Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement
BS EN 60335-2-9:1991 BS EN 60335-2-9:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Toasters, grills, roasters and similar appliances
DD ENV 41208-1:1991 DD ENV 41208-1:1991. Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Virtual terminal service
DD ENV 41208-2:1991 DD ENV 41208-2:1991. Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Check list
DD ENV 41208-3:1991 DD ENV 41208-3:1991. Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Underlying layers check list
DD ENV 41209:1991 DD ENV 41209:1991. Information systems interconnection. Basic class virtual terminal. Common control objects
BS 2782-4:Method 432A:1991, ISO 4901:1985 BS 2782-4:Method 432A:1991, ISO 4901:1985. Methods of testing plastics. Chemical properties. Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins
BS 7469-1:1991, ISO 5797-1:1989 BS 7469-1:1991, ISO 5797-1:1989. Specification for windows and side scuttles for fire-resistant constructions. B class divisions
BS 7472:1991, ISO 9382:1990 BS 7472:1991, ISO 9382:1990. Classification for shipborne barges of all series
BS 7405:1991 BS 7405:1991. Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
BS 7451:1991 BS 7451:1991. Specification for archival quality bookbinding leather
BS 7464:1991, ISO 9089:1989 BS 7464:1991, ISO 9089:1989. Specification for anchor winches for mobile offshore units
BS EN 29519:1994, ISO 9519:1990 BS EN 29519:1994, ISO 9519:1990. Shipbuilding and marine structures. Rungs for dog-step ladders
BS EN 28970:1991, ISO 8970:1989 BS EN 28970:1991, ISO 8970:1989. Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
BS EN 26891:1991, ISO 6891:1983 BS EN 26891:1991, ISO 6891:1983. Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics
BS ISO/IEC 9596-1:1991 BS ISO/IEC 9596-1:1991. Information technology. Open systems interconnection. Common management information protocol. Specification
BS EN 2792:1991 BS EN 2792:1991. Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
BS EN 60335-2-29:1991 BS EN 60335-2-29:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Battery chargers
BS EN 60921:1991 BS EN 60921:1991. Specification for ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60928:1991 BS EN 60928:1991. Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
BS 4409-2:1991 BS 4409-2:1991. Screw conveyors. Specification for portable and mobile type (augers)
BS 3247:1991 BS 3247:1991. Specification for salt for spreading on highways for winter maintenance
BS 7459:Part 1:1991, ISO 7749-1:1986 BS 7459:Part 1:1991, ISO 7749-1:1986. Rotating sprinklers for irrigation equipment. Specification for design and operational requirements
BS 7459-2:1991, ISO 7749-2:1990 BS 7459-2:1991, ISO 7749-2:1990. Rotating sprinklers for irrigation equipment. Methods of test for uniformity of distribution
BS 7473:1991, ISO 8384:1991 BS 7473:1991, ISO 8384:1991. Glossary of terms for dredgers
BS EN ISO 9875:1995, ISO 9875:1991 BS EN ISO 9875:1995, ISO 9875:1991. Specification for marine echo-sounding equipment
BS 3712-1:1991 BS 3712-1:1991. Building and construction sealants. Methods of test for homogeneity, relative density and penetration
BS 3712-4:1991 BS 3712-4:1991. Building and construction sealants. Method of test for adhesion in peel
BS 3939:Part 12:1991, IEC 60617-12:1991 BS 3939:Part 12:1991, IEC 60617-12:1991. Graphical symbols for electrical power, telecommunications and electronics diagrams. Guide for binary logic elements
BS 7470:1991, ISO 3904:1990 BS 7470:1991, ISO 3904:1990. Specification for clear-view screens for use in ships
BS 7471:1991, ISO 3730:1988 BS 7471:1991, ISO 3730:1988. Specification for mooring winches
BS EN 286-1:1991 BS EN 286-1:1991. Simple unfired pressure vessels designed to contain air or nitrogen. Design, manufacture and testing
BS EN 26927:1991, ISO 6927:1981 BS EN 26927:1991, ISO 6927:1981. Building construction. Jointing products. Sealants. Vocabulary
BS EN 27389:1991, ISO 7389:1987 BS EN 27389:1991, ISO 7389:1987. Building construction. Jointing products. Determination of elastic recovery
BS EN 27390:1991, ISO 7390:1987 BS EN 27390:1991, ISO 7390:1987. Building construction. Jointing products. Determination of resistance to flow
BS EN 28339:1991, ISO 8339:1984 BS EN 28339:1991, ISO 8339:1984. Building construction. Jointing products. Sealants. Determination of tensile properties
BS EN 28340:1991, ISO 8340:1984 BS EN 28340:1991, ISO 8340:1984. Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension
BS EN 28394:1991, ISO 8394:1988 BS EN 28394:1991, ISO 8394:1988. Building construction. Jointing products. Determination of extrudability of one-component sealants
BS EN 29046:1991, ISO 9046:1987 BS EN 29046:1991, ISO 9046:1987. Building construction. Sealants. Determination of adhesion/cohesion properties at constant temperature
BS EN 29048:1991, ISO 9048:1987 BS EN 29048:1991, ISO 9048:1987. Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus
BS EN 60127-5:1991 BS EN 60127-5:1991. Miniature fuses. Guide for the quality assessment of miniature fuse-links
BS AU 50-1.3.1a:1991, ISO 4250-1:1988 BS AU 50-1.3.1a:1991, ISO 4250-1:1988. Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for narrow and wide base tyre designations and dimensions
PD 6493:1991 PD 6493:1991. Guidance on methods for assessing the acceptability of flaws in fusion welded structures
DD ENV 41510:1991 DD ENV 41510:1991. Information systems interconnections. Office document architecture (ODA). Document application profile. Processable and formatted documents. Extended mixed mode
BS 476-12:1991 BS 476-12:1991. Fire tests on building materials and structures. Method of test for ignitability of products by direct flame impingement
BS 1902-5.5:1991 BS 1902-5.5:1991. Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
BS 2880:1991 BS 2880:1991. Methods of testing cellulose acetate flake
BS 6043-4.1:1991 BS 6043-4.1:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling
BS 6043-4.4:1991 BS 6043-4.4:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of volatile matter content of unbaked paste
BS 6043-4.5:1991 BS 6043-4.5:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of water content of unbaked pastes
BS 6043-4.6:1991 BS 6043-4.6:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of maximum rammed apparent density of unbaked paste
BS 6043-4.8:1991 BS 6043-4.8:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of electrical resistivity of baked rammed paste
BS 6043-4.13:1991 BS 6043-4.13:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of ash of baked rammed paste
BS 3531-5.3:1991, ISO 5835:1991 BS 3531-5.3:1991, ISO 5835:1991. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for the dimensions of screws having hexagonal drive connection, spherical under-surfaces and asymmetrical thread
BS 3531-5.7:1991, ISO 9714-1:1991 BS 3531-5.7:1991, ISO 9714-1:1991. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for drill bits, taps and countersink cutters
BS 5463:Part 1:1991 BS 5463:Part 1:1991. Specification for high-voltage switches. High-voltage switches for rated voltages above 1 kV and less than 52 kV
BS EN 2310:1991 BS EN 2310:1991. Test methods for the flame resistance rating of non-metallic materials
BS 1186:Part 1:1991 BS 1186:Part 1:1991. Timber for and workmanship in joinery. Specification for timber
BS 2738-3:1991 BS 2738-3:1991. Spectacle lenses. Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses
BS 3521-1:1991 BS 3521-1:1991. Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to ophthalmic lenses
BS 6100-2.5:1991 BS 6100-2.5:1991. Glossary of building and civil engineering terms. Civil engineering. Hydraulic engineering and construction work
BS 6221-11:1991, IEC 60326-11:1991 BS 6221-11:1991, IEC 60326-11:1991. Printed wiring boards. Specification for flex-rigid multilayer printed boards with through connections
BS 6840-10:1991, IEC 60268-10:1991 BS 6840-10:1991, IEC 60268-10:1991. Sound system equipment. Methods for specifying and measuring the characteristics of peak programme level meters
BS EN 268:1991 BS EN 268:1991. Specification for propellants for commercial ammunition. Requirements and test methods
BS EN 2790:1991 BS EN 2790:1991. Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dimensions and loads
BS EN 2791:1991 BS EN 2791:1991. Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
BS 2G 230:1991 BS 2G 230:1991. Specification for general requirements for aircraft electrical cables (second series)
BS 3531-5.6:1991, ISO 6475:1989 BS 3531-5.6:1991, ISO 6475:1989. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for the mechanical requirements and test methods for screws having asymmetrical thread and spherical undersurface
DD ENV 41509:1991 DD ENV 41509:1991. Information systems interconnection. Office document architecture (ODA). Document application profile. Processable and formatted documents. Basic character content
BS 3999-2:1991 BS 3999-2:1991. Methods of measuring the performance of household electrical appliances. Thermal storage electric water-heaters
BS 6817:1991 BS 6817:1991. Specification for porcelain denture teeth
BS 7456:1991 BS 7456:1991. Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
BS 7460:1991 BS 7460:1991. Code of practice for use of spray extraction machines on carpets and soft floor coverings in hospitals
BS EN 253:1991 BS EN 253:1991. Specification for preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene
BS EN 60335-2-56:1991 BS EN 60335-2-56:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Projectors and similar appliances
BS 6221-3:1991, IEC 60326-3:1991 BS 6221-3:1991, IEC 60326-3:1991. Printed wiring boards. Guide for the design and use of printed wiring boards
BS 7436:Part 1:1991 BS 7436:Part 1:1991. Data transfer between agricultural tractors and attached machinery. Specification for data bus protocol
BS 3015:1991, ISO 2041:1990 BS 3015:1991, ISO 2041:1990. Glossary of terms relating to mechanical vibration and shock
BS EN ISO 9029:1995 BS EN ISO 9029:1995. Crude petroleum. Determination of water. Distillation method
BS 7447:1991 BS 7447:1991. Method of test for determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
BS 3724:1991 BS 3724:1991. Glossary of terms relating to fibre ropes and cordage
BS 7477:1991, IEC 60416:1988,ISO 3461-1:1988 BS 7477:1991, IEC 60416:1988,ISO 3461-1:1988. Guide for general principles for the creation of graphical symbols for use on equipment
BS 5258-16:1991 BS 5258-16:1991. Safety of domestic gas appliances. Specification for inset live fuel effect gas fires (2nd and 3rd family gases)
BS EN 264:1991 BS EN 264:1991. Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels
BS EN 215-1:1991 BS EN 215-1:1991. Thermostatic radiator valves. Requirements and test methods
BS 4783-5:1991 BS 4783-5:1991. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for 12.7 mm magnetic tape cartridges for data interchange, recording at 1491 data bytes per millimetre on 18 tracks
BS 7461:1991 BS 7461:1991. Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS ISO/IEC 10206:1991 BS ISO/IEC 10206:1991. Information technology. Programming languages. Extended Pascal
BS 341-1:1991 BS 341-1:1991. Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar
BS 6501-1:1991 BS 6501-1:1991. Flexible metallic hose assemblies. Specification for corrugated hose assemblies
BS 7482-1:1991 BS 7482-1:1991. Instrumentation for the measurement of vibration exposure of human beings. Specification for general requirements for instrumentation for measuring the vibration applied to human beings
BS 7482-2:1991 BS 7482-2:1991. Instrumentation for the measurement of vibration exposure of human beings. Specification for instrumentation for measuring vibration transmitted to the hand
BS 7482-3:1991 BS 7482-3:1991. Instrumentation for the measurement of vibration exposure of human beings. Specification for instrumentation for measuring vibration exposure to the whole body
BS 7117-2:1991 BS 7117-2:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to installation
BS 7117-3:1991 BS 7117-3:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to maintenance after installation
BS 6221-9:1991, IEC 60326-9:1991 BS 6221-9:1991, IEC 60326-9:1991. Printed wiring boards. Specification for flexible multilayer boards with through connections
BS 6221-10:1991, IEC 60326-10:1991 BS 6221-10:1991, IEC 60326-10:1991. Printed wiring boards. Specification for flex-rigid double-sided printed boards with through connections
BS ISO 4087:1991 BS ISO 4087:1991. Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilm
BS 1212-4:1991 BS 1212-4:1991. Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats)
BS 2598:Part 1:1991, ISO 3585:1991 BS 2598:Part 1:1991, ISO 3585:1991. Glass plant, pipeline and fittings. Specification for properties of borosilicate glass 3.3
BS 7476:1991 BS 7476:1991. Specification for polyethylene film for covering silage
BS 6246-5:1991 BS 6246-5:1991. Industrial laundry machinery. Methods for the assessment of the effect of shaped garment finishing machinery on textiles
BS 3604-2:1991 BS 3604-2:1991. Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes
BS 5750-8:1991, EN 29004-2:1993,ISO 9004-2:1991 BS 5750-8:1991, EN 29004-2:1993,ISO 9004-2:1991. Quality systems. Guide to quality management and quality systems elements for services
BS 3970-2:1991 BS 3970-2:1991. Sterilizing and disinfecting equipment for medical products. Specification for steam sterilizers for aqueous fluids in sealed rigid containers
BS EN 50068:1991 BS EN 50068:1991. Specification for wrought steel enclosures for gas-filled high-voltage switchgear and controlgear
DD ENV 41111:1991 DD ENV 41111:1991. Information Systems Interconnection. ISDN. Provision of OSI connection-mode transport service over the OSI connection-mode network service by using an ISDN circuit-mode 64 kbit/s unrestricted bearer service. Permanent case
DD ENV 41508:1991 DD ENV 41508:1991. Information Systems Interconnection. East European graphic character repertoires and their coding
DD ENV 41506:1991 DD ENV 41506:1991. Information Systems Interconnection. Data stream formats for information received from or transmitted to the Teletex service or private information processing systems using Teletex technology
DD ENV 41505:1991 DD ENV 41505:1991. Information Systems Interconnection. Graphic character repertoire and coding for line drawing
DD ENV 41504:1991 DD ENV 41504:1991. Information systems interconnection. Character repertoire and coding for interworking with Telex services
DD ENV 41503:1991 DD ENV 41503:1991. Information Systems Interconnection. European character repertoires and their coding
DD ENV 41502:1991 DD ENV 41502:1991. Information systems interconnection. Character repertoires for information received from or transmitted to the Teletex service or private information processing systems using Teletex technology
DD ENV 41112:1991 DD ENV 41112:1991. Information Systems Interconnection. ISDN. Provision of the OSI connection-mode transport service over the OSI connection-mode network service by using an ISDN circuit-mode 64 kbit/s unrestricted bearer service. Demand case
BS EN 438-1:1991 BS EN 438-1:1991. Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. Specifications
BS EN 27982-1:1991, ISO 7982-1:1987 BS EN 27982-1:1991, ISO 7982-1:1987. Bank telecommunication. Funds transfer messages. Vocabulary and data elements
BS EN 28583:1991, ISO 8583:1987 BS EN 28583:1991, ISO 8583:1987. Bank card originated messages. Interchange message specifications. Content for financial transactions
BS 7442-2:1991, ISO/TR 7621-2:1982 BS 7442-2:1991, ISO/TR 7621-2:1982. Rubber or plastics covered rollers. Recommendations for technical information to be provided by the purchaser
BS 5750:Part 13:1991, EN 29000-3:1993,ISO 9000-3:1991 BS 5750:Part 13:1991, EN 29000-3:1993,ISO 9000-3:1991. Quality systems. Guide to the application of BS 5750:Part 1 to the development, supply and maintenance of software
BS 3531-6.2:1991, ISO 5838-2:1991 BS 3531-6.2:1991, ISO 5838-2:1991. Implants for osteosynthesis. Skeletal pins and wires. Specification for dimensions of Steinmann skeletal pins
BS 7490:1991, ISO 10087:1990 BS 7490:1991, ISO 10087:1990. Specification for coding system for hull identification of small craft
BS 7442-3.2:1991, ISO 7267-2:1986 BS 7442-3.2:1991, ISO 7267-2:1986. Rubber or plastics covered rollers. Method of test. Determination of Shore hardness
BS 3602-2:1991 BS 3602-2:1991. Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes
BS 5262:1991 BS 5262:1991. Code of practice for external renderings
BS 7176:1991 BS 7176:1991. Specification for the resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS ISO/IEC 9576:1991 BS ISO/IEC 9576:1991. Information technology. Open systems interconnection. Connectionless presentation protocol specification
BS EN 60335-2-32:1991 BS EN 60335-2-32:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Massage appliances
BS EN 60335-2-8:1991 BS EN 60335-2-8:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Electric shavers, hair clippers and similar appliances
BS EN 60335-2-31:1991 BS EN 60335-2-31:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Range hoods
BS EN 10020:1991 BS EN 10020:1991. Definition and classification of grades of steel
BS ISO/IEC 10089:1991 BS ISO/IEC 10089:1991. Information technology. 130 mm rewritable optical disk cartridge for information interchange
BS EN 50033:1991 BS EN 50033:1991. Specification for construction and testing of miners' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
BS EN 55011:1991 BS EN 55011:1991. Specification for limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment
BS 6043-4.0:1991 BS 6043-4.0:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. General introduction
BS 6043-4.2:1991 BS 6043-4.2:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution
BS 6043-4.3:1991 BS 6043-4.3:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of aggregate size distribution after extraction by dichloromethane
BS 6043-4.7:1991 BS 6043-4.7:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Preparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass
BS 6043-4.10:1991 BS 6043-4.10:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the apparent porosity of baked rammed paste
BS 7488:1991 BS 7488:1991. Recommendations for handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers' premises
BS 6102-14:1991, ISO 6695:1991 BS 6102-14:1991, ISO 6695:1991. Cycles. Specification for dimensions of bottom bracket axle and crank assembly with square end fittings
BS EN 10130:1991 BS EN 10130:1991. Specification for cold rolled low carbon steel flat products for cold forming: technical delivery conditions
BS EN 60335-2-52:1991 BS EN 60335-2-52:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Oral hygiene appliances connected to the mains supply through a safety isolating transformer
BS 6102-15:1991, ISO 6701:1991 BS 6102-15:1991, ISO 6701:1991. Cycles. Specification for dimensions of spoke nipples
DD 204:1991 DD 204:1991. Guide to determination of exposure limits, recovery times and relaxation times in work measurement
BS EN 60756:1993 BS EN 60756:1993. Non-broadcast video tape recorders. Time base stability
BS 7486-1:1991, IEC 61053-1:1991 BS 7486-1:1991, IEC 61053-1:1991. Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format. FM audio recording. 625 line-50 field systems
BS EN 2569:1991 BS EN 2569:1991. Control cable fittings and turnbarrels. Technical specification
BS ISO/IEC 10035:1991 BS ISO/IEC 10035:1991. Information technology. Open systems interconnection. Connectionless ACSE protocol specification
BS 6043-4.9:1991 BS 6043-4.9:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the cold crushing strength of baked rammed paste
BS 6043-4.11:1991 BS 6043-4.11:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the thermal expansion of baked rammed paste
BS EN 60335-2-23:1991 BS EN 60335-2-23:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Appliances for skin or hair care
BS 2574-1:1991 BS 2574-1:1991. Lower limb orthoses. Guide to the design and manufacture of lower limb orthoses, excluding foot orthoses
BS 2782-4:Method 459A:1991, ISO 1061:1991 BS 2782-4:Method 459A:1991, ISO 1061:1991. Methods of testing plastics. Chemical properties. Determination of free acidity in cellulose acetate
BS 6068-6.5:1991, ISO 5667-5:1991 BS 6068-6.5:1991, ISO 5667-5:1991. Water quality. Sampling. Guidance on sampling of drinking water and water used for food and beverage processing
BS 7484:1991, IEC 61000-2-1:1990 BS 7484:1991, IEC 61000-2-1:1990. Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
BS EN ISO 9300:1995 BS EN ISO 9300:1995. Measurement of gas flow by means of critical flow Venturi nozzles
BS 6644:1991 BS 6644:1991. Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases)
BS EN 29646-1:1992, EN 29646-1:1992 BS EN 29646-1:1992, EN 29646-1:1992. Information technology. Open Systems Interconnection. Conformance testing methodology and framework. General concepts
BS ISO/IEC 9646-2:1991, EN 29646-2:1992 BS ISO/IEC 9646-2:1991, EN 29646-2:1992. Information technology. Open systems interconnection. Conformance testing methodology and framework. Abstract test suite specification


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment