2009/09/07

Cheapest & Latest BSI Standard (PDF) (5)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 1591-2:2008 BS EN 1591-2:2008. Flanges and their joints. Design rules for gasketed circular flange connections. Gasket parameters
BS EN 1018:2006 BS EN 1018:2006. Chemicals used for treatment of water intended for human consumption. Calcium carbonate
BS EN 15532:2008 BS EN 15532:2008. Cycles. Terminology
BS EN 62024-1:2008 BS EN 62024-1:2008. High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor
BS EN 12273:2008 BS EN 12273:2008. Slurry surfacing. Requirements
BS ISO/IEC 14443-4:2008 BS ISO/IEC 14443-4:2008. Identification cards. Contactless integrated circuit cards. Proximity. Transmission protocol
BS EN 1927-2:2008 BS EN 1927-2:2008. Qualitative classification of softwood round timber. Pines
BS EN 12393-3:2008 BS EN 12393-3:2008. Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
BS EN 12393-3:2008 BS EN 12393-3:2008. Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
BS 7909:2008 BS 7909:2008. Code of practice for temporary electrical systems forentertainment and related purposes
BS 7909:2008 BS 7909:2008. Code of practice for temporary electrical systems forentertainment and related purposes
BS EN 3637:2008 BS EN 3637:2008. Aerospace series. Nuts, self-locking, bihexagonal (double reduced), in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, Classification: 1210 MPa/730 °C
BIP 0111:2009 BIP 0111:2009. Implementing metrics for IT service management
BS EN 14033-2:2008 BS EN 14033-2:2008. Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for working
BS EN ISO 13906:2008 BS EN ISO 13906:2008. Animal feeding stuffs. Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents
BS EN ISO 13786:2007 BS EN ISO 13786:2007. Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
BS EN 15305:2008 BS EN 15305:2008. Non-destructive testing. Test method for residual stress analysis by X-ray diffraction
BS EN 12911:2006 BS EN 12911:2006. Water conditioning equipment inside buildings. Active media filters. Requirements for performance, safety and testing
DD CEN/TS 13388:2008 DD CEN/TS 13388:2008. Copper and copper alloys. Compendium of compositions and products
CWA 15903:2008 CWA 15903:2008. Metadata for learning opportunities (MLO). Advertising
CWA 15902-2:2008 CWA 15902-2:2008. Lifting and load-bearing equipment for stages and other production areas within the entertainment industry. Specifications for design, manufacture and for use of aluminium and steel trusses and towers
CWA 15902-1:2008 CWA 15902-1:2008. Lifting and load-bearing equipment for stages and other production areas within the entertainment industry. General requirements (excluding aluminium and steel trusses and towers)
BS EN 817:2008 BS EN 817:2008. Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications
BS EN 15707:2008 BS EN 15707:2008. Print media surveys. Vocabulary and service requirements
BS 5975:2008 BS 5975:2008. Code of practice for temporary works procedures and the permissible stress design of falsework
BS EN 1886:2007 BS EN 1886:2007. Ventilation for buildings. Air handling units. Mechanical performance
08/30195630 DC 08/30195630 DC. BS EN 50377-8-13. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 8-13. Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category U
08/30195627 DC 08/30195627 DC. BS EN 50377-8-12. Connector sets and interconnect Components to be used in optical fibre communication systems. Product specifications. Part 8-12. Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category U
08/30195624 DC 08/30195624 DC. BS EN 50377-8-11. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 8-11. Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category C
08/30195621 DC 08/30195621 DC. BS EN 50377-8-10. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 8-10. Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category C
08/30195618 DC 08/30195618 DC. BS EN 50325-5. Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces. Part 5. Functional safety communication based on EN 50325-4
08/30195594 DC 08/30195594 DC. BS EN 61988-1. Plasma display panels. Part 1. Terminology and letter symbols
08/30195587 DC 08/30195587 DC. BS EN 61988-2-1. Plasma display panels. Part 2-1. Measuring methods. Optical and optoelectrical
08/30195582 DC 08/30195582 DC. BS EN 3264. Aerospace series. Pipe coupling 8°30' in titanium alloy. Thrust wire nuts
08/30195578 DC 08/30195578 DC. BS EN 62575-2. Radio frequency (RF) bulk acoustic wave (BAW) filters. Part 2. Guide to the use
08/30195574 DC 08/30195574 DC. BS EN 62615. Electrostatic Discharge Sensitivity Testing. Transmission Line Pulse (TLP). Component Level
08/30195564 DC 08/30195564 DC. BS EN 60974-1. Arc welding equipment. Part 1. Welding power sources
ISO/IECTR24770 : 2008 EDTN1 ISO/IECTR24770 : 2008 EDTN1. Information technology. Real-time locating system (RTLS) device performance test methods. Test methods for air interface communication at 2,4 GHz
08/30195552 DC 08/30195552 DC. BS EN 55013 ISA. Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
08/30195549 DC 08/30195549 DC. BS EN 55020 ISA. Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement
08/30195548 DC 08/30195548 DC. DD ISO/TS 16949. Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
08/30195545 DC 08/30195545 DC. BS EN 60335-2-103 AMD. Household and similar electrical appliances. Safety. Part 2-103. Particular requirements for drives for gates, doors and windows
08/30195542 DC 08/30195542 DC. BS EN 60335-2-60 AMD. Household and similar electrical appliances. Safety. Part 2-60. Particular requirements for whirlpool baths and whirlpool spas
08/30195539 DC 08/30195539 DC. BS EN 4632-004. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. Part 004. Homogeneous assemblies highly alloyed steels
08/30195536 DC 08/30195536 DC. BS EN 60335-2-105 AMD. Household and similar electrical appliances. Safety. Part 2-105. Particular requirements for multifunctional shower cabinets
08/30195533 DC 08/30195533 DC. BS EN 2648. Aerospace series. Washers, concave, in alloy steel, cadmium plated
08/30195526 DC 08/30195526 DC. BS EN 60335-2-75 AMD. Household and similar electrical appliances. Safety. Part 2-75. Particular requirements for commercial dispensing appliances and vending machines
08/30195519 DC 08/30195519 DC. BS EN 4008-007. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Part 007. Positioner for crimping tool M22520/2-01. Product standard
08/30195511 DC 08/30195511 DC. BS EN 61300-3-22. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-22. Examinations and measurements. Ferrule compression force
08/30195508 DC 08/30195508 DC. BS EN 60745-2-1 AMD. Hand-held motor-operated electric tools. Safety. Part 2-1. Particular requirements for drills and impact drills
08/30195505 DC 08/30195505 DC. BS EN 60745-2-6 AMD. Hand-held motor-operated electric tools. Safety. Part 2-6. Particular requirements for hammers
08/30195502 DC 08/30195502 DC. BS EN 4008-008. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Part 008. Positioner for crimping tool M22520/7-01. Product standard
08/30195483 DC 08/30195483 DC. BS EN 61812-1. Time relays for industrial and residential use. Part 1. Requirements and tests
08/30195479 DC 08/30195479 DC. BS EN 60793-1-30. Optical fibres. Part 1-30. Measurement methods and test procedures. Fibre proof test
08/30195475 DC 08/30195475 DC. BS EN 60793-1-44. Optical fibres. Part 1-44. Measurement methods and test procedures. Cut-off wavelength
08/30195463 DC 08/30195463 DC. BS ISO 105-F10 AMD1. Textiles. Tests for colour fastness. Part F10. Specification for adjacent fabric. Multifibre
08/30195458 DC 08/30195458 DC. BS EN 60172 AMD2. Test procedure for the determination of the temperature index of enamelled winding wires
ISO/IECTR24769 : 2008 EDTN1 ISO/IECTR24769 : 2008 EDTN1. ISO/IEC/TR24769 : 2008 Information technology. Real-time locating system (RTLS) device conformance test methods. Test methods for air interface communication at 2,4 GHz
08/30195433 DC 08/30195433 DC. BS EN 60519-1. Safety in electroheating installations. Part 1. General requirements
08/30195428 DC 08/30195428 DC. BS EN 60519-6. Safety in electroheat installations. Part 6. Specifications for safety in industrial microwave heating equipment
08/30195422 DC 08/30195422 DC. BS EN 60974-4. Arc welding equipment. Part 4. Periodic inspection and testing
08/30195403 DC 08/30195403 DC. BS EN ISO 24534-4. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 4. Secure communications using asymmetrical techniques
08/30195399 DC 08/30195399 DC. BS EN ISO 24534-3. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 3. Vehicle data
08/30195395 DC 08/30195395 DC. BS EN ISO 24534-2. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 2. Operational requirements
08/30195391 DC 08/30195391 DC. BS EN ISO 24534-1. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 1. Architecture
08/30195387 DC 08/30195387 DC. BS EN ISO 11114-3. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 3. Autogeneous ignition test in oxygen atmosphere
08/30195386 DC 08/30195386 DC. BS EN 15888. Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing
08/30195376 DC 08/30195376 DC. BS EN ISO 3822-3 AMD1. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 3. Mounting and operating conditions for in-line valves and appliances
08/30195355 DC 08/30195355 DC. BS EN 60335-2-79 AMD. Household and similar electrical appliances. Safety. Part 2-79. Particular requirements for high pressure cleaners and steam cleaners
08/30195352 DC 08/30195352 DC. BS EN 60335-2-69 AMD. Household and similar electrical appliances. Safety. Part 2-69. Particular requirements for wet and dry vacuum cleaners, including powerbrush, for industrial and commercial use
08/30195344 DC 08/30195344 DC. BS EN 60335-2-68 AMD. Household and similar electrical appliances. Safety. Part 2-68. Particular requirements for spray extraction appliances, for industrial and commercial use
08/30195341 DC 08/30195341 DC. BS EN 60335-2-67 AMD. Household and similar electrical appliances. Safety. Part 2-67. Particular requirements for floor treatment and floor cleaning machines,for industrial and commercial use
BS EN 14025:2008 BS EN 14025:2008. Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and Construction
08/30195334 DC 08/30195334 DC. BS ISO 9211-4 AMD1. Optics and optical instruments. Optical coatings. Part 4. Specific test methods
08/30195242 DC 08/30195242 DC. BS EN 62599-2. Alarm systems. Part 2. General requirements. Electromagnetic compatibility
08/30195238 DC 08/30195238 DC. BS EN 62599-1. Alarm systems. Part 1. General requirements. Environmental test methods
08/30195225 DC 08/30195225 DC. BS EN 60684-3-283. Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 283. Heat shrinkable, polyolefin sleeving. For bus-bar insulation
08/30195221 DC 08/30195221 DC. BS EN 60684-3-282. Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 282. Heat shrinkable, polyolefin sleeving. Stress control
08/30195217 DC 08/30195217 DC. BS EN 60684-3-281. Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 281. Heat shrinkable, polyolefin sleeving. Semi conductive
08/30195213 DC 08/30195213 DC. BS EN 60684-3-280. Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 280. Heat shrinkable, polyolefin sleeving. Anti-tracking
08/30195210 DC 08/30195210 DC. BS EN 50530. Overall efficiency of photovoltaic inverters
CWA 14747-2:2008 CWA 14747-2:2008. Humanitarian mine action. Test and evaluation. Soil characterization for metal detector and ground penetrating radar performance
08/30195180 DC 08/30195180 DC. BS EN 61099. Specification for unused synthetic organic esters for electrical purposes
08/30195172 DC 08/30195172 DC. BS EN 60335-2-13. Household and similar electrical appliances. Safety. Part 2-13. Particular requirements for deep fat fryers, frying pans and similar appliances
08/30195168 DC 08/30195168 DC. BS EN 60335-2-74 AMD2. Household and similar electrical appliances. Safety. Part 2-74. Particular requirements for portable immersion heaters
08/30195162 DC 08/30195162 DC. BS EN 60335-2-73 AMD2. Household and similar electrical appliances. Safety. Part 2-73. Particular requirements for fixed immersion heaters
08/30195155 DC 08/30195155 DC. BS EN 60335-2-59 AMD2. Household and similar electrical appliances. Safety. Part 2-59. Particular requirements for insect killers
08/30195149 DC 08/30195149 DC. BS EN 60335-2-41 AMD2. Household and similar electrical appliances. Safety. Part 2-41. Particular requirements for pumps
08/30195122 DC 08/30195122 DC. BS EN 60335-2-35 AMD2. Household and similar electrical appliances. Safety. Part 2-35. Particular requirements for instantaneous water heaters
08/30195118 DC 08/30195118 DC. BS EN 60335-2-30 ED5. Household and similar electrical appliances. Safety. Part 2-30. Particular requirements for room heaters
08/30195114 DC 08/30195114 DC. BS EN 60335-2-29 AMD2. Household and similar electrical appliances. Safety. Part 2-29. Particular requirements for battery chargers
08/30195110 DC 08/30195110 DC. BS EN 60335-2-27 ED5. Household and similar electrical appliances. Safety. Part 2-27. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
08/30195105 DC 08/30195105 DC. BS EN 60335-2-2 ED6. Household and similar electrical appliances. Safety. Part 2-2.Particular requirements for vacuum cleaners and water-suction cleaning appliances
08/30195099 DC 08/30195099 DC. BS EN 60745-2-19:2005 prAB. Hand-held motor-operated electric tools. Safety. Part 2-19. Particular requirements for jointers
08/30195096 DC 08/30195096 DC. BS EN 60745-2-13:2007 prAB. Hand-held motor-operated electric tools. Safety. Part 2-13. Particular requirements for chain saws
08/30195093 DC 08/30195093 DC. BS EN 60745-2-12:2003 prAA. Hand-held motor-operated electric tools. Safety. Part 2-12. Particular requirements for concrete vibrators
08/30195090 DC 08/30195090 DC. BS EN 60745-2-15:2006 prAB. Hand-held motor-operated electric tools. Safety. Part 2-15. Particular requirements for hedge trimmers
08/30195084 DC 08/30195084 DC. BS EN ISO 1927-8. Unshaped refractory materials. Part 8. Determination of complementary properties
08/30195079 DC 08/30195079 DC. BS EN ISO 1927-7. Unshaped refractory materials. Part 7. Tests on pre-formed shapes
08/30195075 DC 08/30195075 DC. BS EN ISO 1927-6. Unshaped refractory materials. Part 6. Measurement of physical properties
08/30195071 DC 08/30195071 DC. BS EN ISO 1927-5. Unshaped refractory materials. Part 5. Preparation and treatment of test pieces
08/30195067 DC 08/30195067 DC. BS EN ISO 1927-4. Unshaped refractory materials. Part 4. Determination of consistency of castables
08/30195061 DC 08/30195061 DC. BS EN ISO 1927-3. Unshaped refractory materials. Part 3. Characterization as received
08/30195056 DC 08/30195056 DC. BS EN ISO 1927-2. Unshaped refractory materials. Part 2. Sampling for testing
08/30195018 DC 08/30195018 DC. BS EN 60204-33. Safety of machinery. Electrical equipment of machines. Part 33. Requirements for semiconductor fabrication equipment
BIP 2183:2008 BIP 2183:2008. IEE On Site Guide. BS 7671:2008 IEE Wiring Regulations 17th Edition (Spiral-bound)
08/30194827 DC 08/30194827 DC. BS EN 61937-11. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Part 11. MPEG4 AAC and its extensions in LATM/LOAS
CWA 15899:2008 CWA 15899:2008. Standardization of an innovation capability rating for SMEs
CWA 15896-1:2008 CWA 15896-1:2008. Value added purchasing management. General criteria
CWA 15896-2:2008 CWA 15896-2:2008. Value added purchasing management. Accredited structure and process for certification bodies
BS 25777:2008 (Paperback) BS 25777:2008 (Paperback). Information and communications technology continuity management. Code of practice
ISO/IEC29341-5-10 : 2008 (TEXT) EDTN1 ISO/IEC29341-5-10 : 2008 (TEXT) EDTN1.
08/30194573 DC 08/30194573 DC. BS EN 60891. Procedures for temperature and irradiance corrections to measured I-V characteristics of photovoltaic devices
08/30194543 DC 08/30194543 DC. BS ISO 2219. Thermal insulation products for buildings. Factory-made products of expanded cork (ICB). Specification
ISO/IEC29341-12-11 : 2008 EDTN1 ISO/IEC29341-12-11 : 2008 EDTN1. ISO/IEC29341-12-11 : 2008 Information technology. UPnP Device Architecture. Part 12-11: Remote User Interface Device Control Protocol. Remote User Interface Server Service
ISO/IEC29341-12-10 : 2008 EDTN1 ISO/IEC29341-12-10 : 2008 EDTN1. ISO/IEC29341-12-10 : 2008 Information technology. UPnP Device Architecture. Part 12-10: Remote User Interface Device Control Protocol. Remote User Interface Client Service
ISO/IEC29341-12-2 : 2008 EDTN1 ISO/IEC29341-12-2 : 2008 EDTN1. ISO/IEC29341-12-2 : 2008 Information technology. UPnP Device Architecture. Part 12-2: Remote User Interface Device Control Protocol. Remote User Interface Server Device
ISO/IEC29341-12-1 : 2008 EDTN1 ISO/IEC29341-12-1 : 2008 EDTN1. ISO/IEC29341-12-1 : 2008 Information technology. UPnP Device Architecture. Part 12-1: Remote User Interface Device Control Protocol. Remote User Interface Client Device
ISO/IEC29341-11-12 : 2008 EDTN1 ISO/IEC29341-11-12 : 2008 EDTN1. ISO/IEC29341-11-12 : 2008 Information technology. UPnP Device Architecture. Part 11-12: Quality of Service Device Control Protocol. Level 2. Quality of Service Policy Holder Service
ISO/IEC29341-11-11 : 2008 EDTN1 ISO/IEC29341-11-11 : 2008 EDTN1. ISO/IEC29341-11-11 : 2008 Information technology. UPnP Device Architecture. Part 11-11: Quality of Service Device Control Protocol. Level 2. Quality of Service Manager Service
ISO/IEC29341-11-10 : 2008 EDTN1 ISO/IEC29341-11-10 : 2008 EDTN1. ISO/IEC29341-11-10 : 2008 Information technology. UPnP Device Architecture. Part 11-10: Quality of Service Device Control Protocol. Level 2. Quality of Service Device Service
ISO/IEC29341-11-2 : 2008 EDTN1 ISO/IEC29341-11-2 : 2008 EDTN1. ISO/IEC29341-11-2 : 2008 Information technology. UPnP Device Architecture. Part 11-2: Quality of Service Device Control Protocol. Level 2. Quality of Service Schemas
ISO/IEC29341-11-1 : 2008 EDTN1 ISO/IEC29341-11-1 : 2008 EDTN1. ISO/IEC29341-11-1 : 2008 Information technology. UPnP Device Architecture. Part 11-1: Quality of Service Device Control Protocol. Level 2. Quality of Service Architecture
ISO/IEC29341-10-12 : 2008 EDTN1 ISO/IEC29341-10-12 : 2008 EDTN1. ISO/IEC29341-10-12 : 2008 Information technology. UPnP Device Architecture. Part 10-12: Quality of Service Device Control Protocol. Quality of Service Policy Holder Service
ISO/IEC29341-10-11 : 2008 EDTN1 ISO/IEC29341-10-11 : 2008 EDTN1. ISO/IEC29341-10-11 : 2008 Information technology. UPnP Device Architecture. Part 10-11: Quality of Service Device Control Protocol. Quality of Service Manager Service
ISO/IEC29341-10-10 : 2008 EDTN1 ISO/IEC29341-10-10 : 2008 EDTN1. ISO/IEC29341-10-10 : 2008 Information technology. UPnP Device Architecture. Part 10-10: Quality of Service Device Control Protocol. Quality of Service Device Service
ISO/IEC29341-10-1 : 2008 EDTN1 ISO/IEC29341-10-1 : 2008 EDTN1. ISO/IEC29341-10-1 : 2008 Information technology. UPnP Device Architecture. Part 10-1: Quality of Service Device Control Protocol. Quality of Service Architecture
ISO/IEC29341-7-11 : 2008 EDTN1 ISO/IEC29341-7-11 : 2008 EDTN1. ISO/IEC29341-11 : 2008 Information technology. UPnP Device Architecture. Part 7-11: Lighting Device Control Protocol. Switch Power Service
ISO/IEC29341-7-10 : 2008 EDTN1 ISO/IEC29341-7-10 : 2008 EDTN1. ISO/IEC29341-7-10 : 2008 Information technology. UPnP Device Architecture. Part 7-10: Lighting Device Control Protcol. Dimming Service
ISO/IEC29341-7-2 : 2008 EDTN1 ISO/IEC29341-7-2 : 2008 EDTN1. ISO/IEC29341-7-2 : 2008 Information technology. UPnP Device Architecture. Part 7-2: Lighting Device Control Protocol. Dimmable Light Device
08/30194466 DC 08/30194466 DC. BS EN 1859. Chimneys. Metal chimneys. Test methods
ISO/IEC29341-7-1 : 2008 EDTN1 ISO/IEC29341-7-1 : 2008 EDTN1. ISO/IEC29341-7-1 : 2008 Information technology. UPnP Device Architecture. Part 7-1: Lighting Device Control Protocol. Binary Light Device
ISO/IEC29341-5-1 : 2008 EDTN1 ISO/IEC29341-5-1 : 2008 EDTN1. ISO/IEC29341-5-1 : 2008 Information technology. UPnP Device Architecture. Part 5-1: Digital Security Camera Device Control Protocol. Digital Security Camera Device
ISO/IEC29341-5-10 : 2008 EDTN1 ISO/IEC29341-5-10 : 2008 EDTN1. ISO/IEC29341-5-10 : 2008 Information technology. UPnP Device Architecture. Part 5-10: Digital Security Camera Device Control Protocol. Digital Security Camera Motion Image Service
ISO/IEC29341-5-11 : 2008 EDTN1 ISO/IEC29341-5-11 : 2008 EDTN1. ISO/IEC29341-5-11 : 2008 Information technology. UPnP Device Architecture. Part 5-11: Digital Security Camera Device Control Protocol. Digital Security Camera Settings Service
ISO/IEC29341-5-12 : 2008 EDTN1 ISO/IEC29341-5-12 : 2008 EDTN1. ISO/IEC29341-5-12 : 2008 Information technology. UPnP Device Architecture. Part 5-12: Digital Security Camera Device Control Protocol. Digital Security Camera Still Image Service
ISO/IEC29341-6-1 : 2008 EDTN1 ISO/IEC29341-6-1 : 2008 EDTN1. ISO/IEC29341-6-1 : 2008 Information technology. UPnP Device Architecture. Part 6-1: Heating, Ventilation and Air Conditioning Device Control Protocol. System Device
ISO/IEC29341-6-2 : 2008 EDTN1 ISO/IEC29341-6-2 : 2008 EDTN1. ISO/IEC29341-6-2 : 2008 Information technology. UPnP Device Architecture. Part 6-2: Heating, Ventilation and Air Conditioning Device Control Protocol. Zone Thermostat Device
ISO/IEC29341-6-10 : 2008 EDTN1 ISO/IEC29341-6-10 : 2008 EDTN1. ISO/IEC29341-6-10 : 2008 Information technology. UPnP Device Architecture. Part 6-10: Heating, Ventilation and Air Conditioning Device Control Protocol. Control Valve Service
ISO/IEC29341-6-11 : 2008 EDTN1 ISO/IEC29341-6-11 : 2008 EDTN1. ISO/IEC 29341-6-11 : 2008 Information technology. UPnP Device Architecture. Part 6-11: Heating, Ventilation and Air Conditioning Device Control Protocol. Fan Operating Mode Service
ISO/IEC29341-6-12 : 2008 EDTN1 ISO/IEC29341-6-12 : 2008 EDTN1. ISO/IEC29341-6-12 : 2008 Information technology. UPnP Device Architecture. Part 6-12: Heating, Ventilation and Air Conditioning Device Control Protocol. Fan Speed Service
ISO/IEC29341-6-13 : 2008 EDTN1 ISO/IEC29341-6-13 : 2008 EDTN1. ISO/IEC29341-6-13 : 2008 Information technology. UPnP Device Architecture. Part 6-13: Heating, Ventilation and Air Conditioning Device Control Protocol. House Status Service
ISO/IEC29341-6-14 : 2008 EDTN1 ISO/IEC29341-6-14 : 2008 EDTN1. ISO/IEC29341-6-14 : 2008 Information technology. UPnP Device Architecture. Part 6-14: Heating, Ventilation and Air Conditioning Device Control Protocol. Setpoint Schedule Service
ISO/IEC29341-6-15 : 2008 EDTN1 ISO/IEC29341-6-15 : 2008 EDTN1. ISO/IEC29341-6-15 : 2008 Information technology. UPnP Device Architecture. Part 6-15: Heating, Ventilation and Air Conditioning Device Control Protocol. Temperature Sensor Service
ISO/IEC29341-6-16 : 2008 EDTN1 ISO/IEC29341-6-16 : 2008 EDTN1. ISO/IEC29341-6-16 : 2008 Information technology. UPnP Device Architecture. Part 6-16: Heating, Ventilation and Air Conditioning Device Control Protocol. Temperature Setpoint Service
ISO/IEC29341-6-17 : 2008 EDTN1 ISO/IEC29341-6-17 : 2008 EDTN1. ISO/IEC29341-6-17 : 2008 Information technology. UPnP Device Architecture. Part 6-17: Heating, Ventilation and Air Conditioning Device Control Protocol. User Operating Mode Service
ISO/IEC29341-13-10 : 2008 EDTN1 ISO/IEC29341-13-10 : 2008 EDTN1. ISO/IEC29341-13-10 : 2008 Information technology. UPnP Device Architecture. Part 13-10: Device Security Device Control Protocol. Device Security Service
ISO/IEC29341-13-11 : 2008 EDTN1 ISO/IEC29341-13-11 : 2008 EDTN1. ISO/IEC29341-13-11 : 2008 Information technology. UPnP Device Architecture. Part 13-11: Device Security Device Control Protocol. Security Console Service
ISO/IEC29341-8-1 : 2008 EDTN1 ISO/IEC29341-8-1 : 2008 EDTN1. ISO/IEC29341-8-1 : 2008 Information technology. UPnP Device Architecture. Part 8-1: Internet Gateway Device Control Protocol. Internet Gateway Device
ISO/IEC29341-8-2 : 2008 EDTN1 ISO/IEC29341-8-2 : 2008 EDTN1. ISO/IEC29341-8-2 : 2008 Information technology. UPnP Device Architecture. Part 8-2: Internet Gateway Device Control Protocol. Local Area Network Device
ISO/IEC29341-8-3 : 2008 EDTN1 ISO/IEC29341-8-3 : 2008 EDTN1. ISO/IEC 29341-8-3 : 2008 Information technology. UPnP Device Architecture. Part 8-3: Internet Gateway Device Control Protocol. Wide Area Network Device
ISO/IEC29341-8-4 : 2008 EDTN1 ISO/IEC29341-8-4 : 2008 EDTN1. ISO/IEC29341-8-4 : 2008 Information technology. UPnP Device Architecture. Part 8-4: Internet Gateway Device Control Protocol. Wide Area Network Connection Device
ISO/IEC29341-8-5 : 2008 EDTN1 ISO/IEC29341-8-5 : 2008 EDTN1. ISO/IEC29341-8-5 : 2008 Information technology. UPnP Device Architecture. Part 8-5: Internet Gateway Device Control Protocol. Wireless Local Area Network Access Point Device
ISO/IEC29341-8-10 : 2008 EDTN1 ISO/IEC29341-8-10 : 2008 EDTN1. ISO/IEC29341-8-10 : 2008 Information technology. UPnP Device Architecture. Part 8-10: Internet Gateway Device Control Protocol. Local Area Network Host Configuration Management Service
ISO/IEC29341-8-11 : 2008 EDTN1 ISO/IEC29341-8-11 : 2008 EDTN1. ISO/IEC29341-8-11 : 2008 Information technology. UPnP Device Architecture. Part 8-11: Internet Gateway Device Control Protocol. Layer 3 Forwarding Service
ISO/IEC29341-8-12 : 2008 EDTN1 ISO/IEC29341-8-12 : 2008 EDTN1. ISO/IEC29341-8-12 : 2008 Information technology. UPnP Device Architecture. Part 8-12: Internet Gateway Device Control Protocol. Link Authentication Services
ISO/IEC29341-8-13 : 2008 EDTN1 ISO/IEC29341-8-13 : 2008 EDTN1. ISO/IEC29341-8-13 : 2008 Information technology. UPnP Device Architecture. Part 8-13: Internet Gateway Device Control Protocol. Radius Client Service
ISO/IEC29341-8-14 : 2008 EDTN1 ISO/IEC29341-8-14 : 2008 EDTN1. ISO/IEC23941-8-14 : 2008 Information technology. UPnP Device Architecture. Part 8-14: Internet Gateway Device Control Protocol. Wide Area Network Cable Link Configuration Service
08/30194409 DC 08/30194409 DC. PD 5500 AMD1. Specification for unfired fusion welded pressure vessels
ISO/IEC29341-8-15 : 2008 EDTN1 ISO/IEC29341-8-15 : 2008 EDTN1. ISO/IEC29341-8-15 : 2008 Information technology. UPnP Device Architecture. Part 8-15: Internet Gateway Device Control Protocol. Wide Area Network Common Interface Configuration Service
ISO/IEC29341-8-16 : 2008 EDTN1 ISO/IEC29341-8-16 : 2008 EDTN1. ISO/IEC29341-8-16 : 2008 Information technology. UPnP Device Architecture. Part 8-16: Internet Gateway Device Control Protocol. Wide Area Network Digital Subscriber Line Configuration Service
ISO/IEC29341-8-17 : 2008 EDTN1 ISO/IEC29341-8-17 : 2008 EDTN1. ISO/IEC29341-8-17 : 2008 Information technology. UPnP Device Architecture. Part 8-17: Internet Gateway Device Control Protocol. Wide Area Network Ethernet Link Configuration Service
ISO/IEC29341-8-18 : 2008 EDTN1 ISO/IEC29341-8-18 : 2008 EDTN1. ISO/IEC29341-8-18 : 2008 Information technology. UPnP Device Architecture. Part 8-18: Internet Gateway Device Control Protocol. Wide Area Network Internet Protocol Connection Service
ISO/IEC29341-8-19 : 2008 EDTN1 ISO/IEC29341-8-19 : 2008 EDTN1. ISO/IEC29341-8-19 : 2008 Information technology. UPnP Device Architecture. Part 8-19: Internet Gateway Device Control Protocol. Wide Area Network Plain Old Telephone Service Link Configuration Service
ISO/IEC29341-8-20 : 2008 EDTN1 ISO/IEC29341-8-20 : 2008 EDTN1. ISO/IEC29341-8-20: 2008 Information technology. UPnP Device Architecture. Part 8-20: Internet Gateway Device Control Protocol. Wide Area Network Point-to-Point Protocol Connection Service
ISO/IEC29341-8-21 : 2008 EDTN1 ISO/IEC29341-8-21 : 2008 EDTN1. ISO/IEC 29341-8-21 : 2008 Information technology. UPnP Device Architecture. Part 8-21: Internet Gateway Device Control Protocol. Wireless Local Area Network Congfiguration Service
ISO/IEC29341-9-1 : 2008 EDTN1 ISO/IEC29341-9-1 : 2008 EDTN1. ISO/IEC29341-9-1 : 2008 Information technology. UPnP Device Architecture. Part 9-1: Imaging Device Control Protocol. Printer Device
ISO/IEC29341-9-2 : 2008 EDTN1 ISO/IEC29341-9-2 : 2008 EDTN1. ISO/IEC 29341-9-2 : 2008 Information technology. UPnP Device Architecture. Part 9-2: Imaging Device Control Protocol. Scanner Device
ISO/IEC29341-9-10 : 2008 EDTN1 ISO/IEC29341-9-10 : 2008 EDTN1. ISO/IEC29341-9-10 : 2008 Information technology. UPnP Device Architecture. Part 9-10: Imaging Device Control Protocol. External Activity Service
ISO/IEC29341-9-11 : 2008 EDTN1 ISO/IEC29341-9-11 : 2008 EDTN1. ISO/IEC29341-9-11 : 2008 Information technology. UPnP Device Architecture. Part 9-11: Imaging Device Control Protocol. Feeder Service
ISO/IEC29341-9-12 : 2008 EDTN1 ISO/IEC29341-9-12 : 2008 EDTN1. ISO.IEC29341-9-12 : 2008 Information technology. UPnP Device Architecture. Part 9-12: Imaging Device Control Protocol. Print Basic Service
ISO/IEC29341-9-13 : 2008 EDTN1 ISO/IEC29341-9-13 : 2008 EDTN1. ISO/IEC29341-9-13 : 2008 Information technology. UPnP Device Architecture. Part 9-13: Imaging Device Control Protocol. Scan Service
ISO/IEC29341-4-13 : 2008 EDTN1 ISO/IEC29341-4-13 : 2008 EDTN1. ISO/IEC29341-4-13 : 2008 Information technology. UPnP Device Architecture. Part 4-13: Audio Video Device Control Protocol. Level 2. Rendering Control Service
ISO/IEC29341-4-12 : 2008 EDTN1 ISO/IEC29341-4-12 : 2008 EDTN1. ISO/IEC29341-4-12 : 2008 Information technology. UPnP Device Architecture. Part 4-12: Audio Video Control Protocol. Level 2. Content Directory Service
ISO/IEC29341-4-11 : 2008 EDTN1 ISO/IEC29341-4-11 : 2008 EDTN1. ISO/IEC29341-4-11 : 2008 Information technology. UPnP Device Architecture. Part 4-11: Audio Video Device Control Protocol. Level 2. Connection Manager Service
ISO/IEC29341-4-10 : 2008 EDTN1 ISO/IEC29341-4-10 : 2008 EDTN1. ISO/IEC29341-4-10 : 2008 Information technology. UPnP Device Architecture. Part 4-10: Audio Video Device Control Protocol. Level 2. Audio Video Transport Service
ISO/IEC29341-4-2 : 2008 EDTN1 ISO/IEC29341-4-2 : 2008 EDTN1. ISO/IEC29341-4-2 : 2008 Information technology. UPnP Device Architecture. Part 4-2: Audio Video Device Control Protocol. Level 2. Media Renderer Device
ISO/IEC29341-4-3 : 2008 EDTN1 ISO/IEC29341-4-3 : 2008 EDTN1. ISO/IEC29341-4-3 : 2008 Information technology. UPnP Device Architecture. Part 4-3: Audio Video Device Control Protocol. Level 2. Media Service Device
ISO/IEC29341-4-4 : 2008 EDTN1 ISO/IEC29341-4-4 : 2008 EDTN1. ISO/IEC29341-4-4 : 2008 Information technology. UPnP Device Architecture. Part 4-4: Audio Video Device Control Protocol. Level 2. Audio Video Data Structures
ISO/IEC29341-3-13: 2008 EDTN1 ISO/IEC29341-3-13: 2008 EDTN1. ISO/IEC29341-3-13 : 2008 Information technology. UPnP Device Architecture. Part 3-13: Audio Video Device Control Protocol. Rendering Control Service
ISO/IEC29341-3-12 : 2008 EDTN1 ISO/IEC29341-3-12 : 2008 EDTN1. ISO/IEC29341-3-12 : 2008 Information technology. UPnP Device Architecture. Part 3-12: Audio Video Device Control Protocol. Content Directory Service
ISO/IEC29341-3-11 : 2008 EDTN1 ISO/IEC29341-3-11 : 2008 EDTN1. ISO/IEC29341-3-11 : 2008 Information technology. UPnP Device Architecture. Part 3-11: Audio Video Device Control Protocol. Connection Manager Service
ISO/IEC29341-3-10 : 2008 EDTN1 ISO/IEC29341-3-10 : 2008 EDTN1. ISO/IEC29341-3-10 : 2008 Information technology. UPnP Device Architecture. Part 3-10: Audio Video Device Control Protocol. Audio Video Transport Service
ISO/IEC29341-3-3 : 2008 EDTN1 ISO/IEC29341-3-3 : 2008 EDTN1. ISO/IEC 29341-3-3 : 2008 Information technology. UPnP Device Architecture. Part 3-3: Audio Video Device Control Protocol. Media Server Device
ISO/IEC29341-3-2 : 2008 EDTN1 ISO/IEC29341-3-2 : 2008 EDTN1. ISO/IEC29341-3-2 : 2008 Information technology. UPnP Device Architecture. Part 3-2: Audio Video Device Control Protocol. Media Renderer Device
ISO/IEC29341-2 : 2008 EDTN1 ISO/IEC29341-2 : 2008 EDTN1. ISO/IEC29341-2 : 2008 Information technology. UPnP Device Architecture. Part 2: Basic Device Control Protocol. Basic Device
ISO/IEC29341-1 : 2008 EDTN1 ISO/IEC29341-1 : 2008 EDTN1. ISO/IEC219341-1 : 2008 Information technology. UPnP Device Architecture. Part 1: UPnP Device Architecture Version 1.0
ISO/IEC29341-3-1 : 2008 EDTN1 ISO/IEC29341-3-1 : 2008 EDTN1. ISO/IEC29341-3-1 : 2008 Information technology. UPnP Device Architecture. Part 3-1: Audio Video Device Control Protocol. Audio Video Architecture
ISO/IEC29341-4-14 : 2008 EDTN1 ISO/IEC29341-4-14 : 2008 EDTN1. ISO/IEC29341-4-14 : 2008 Information technology. UPnP Device Architecture. Part 4-14: Audio video device control protocol. Level 2. Scheduled recording service
08/30194268 DC 08/30194268 DC. BS EN 61439-5. Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for assemblies for power distribution in public networks
08/30194108 DC 08/30194108 DC. BS 7533-9. Pavements constructed with clay, natural stone or concrete pavers. Part 9. Code of practice for the construction of rigid pavements of clay pavers
08/30194094 DC 08/30194094 DC. BS EN 13245-3. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Part 3. Designation of PVC-UE profiles
08/30194076 DC 08/30194076 DC. BS ISO 21091. Health informatics. Directory services for security, communications and identification of professionals and patients
08/30194011 DC 08/30194011 DC. BS ISO 18308. Health informatics. Requirements for an electronic health record architecture
08/30193943 DC 08/30193943 DC. BS EN 62000. Single-mode fibre compatibility guidelines
08/30193922 DC 08/30193922 DC. BS EN 62439. Industrial communication networks. High availability automation networks
CWA 15897:2008 CWA 15897:2008. Submerged membrane bioreactor (MBR) technology
08/30193881 DC 08/30193881 DC. BS EN 60939-1. Passive filter units for electromagnetic interference suppression. Part 1. Generic specification
08/30193847 DC 08/30193847 DC. BS EN 3475-605. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 605. Wet short circuit test
08/30193844 DC 08/30193844 DC. BS EN 3475-604. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 604. Resistance to dry arc propagation
08/30193841 DC 08/30193841 DC. BS EN 3475-603. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 603. Resistance to wet arc tracking
08/30193746 DC 08/30193746 DC. BS ISO/IEC 19505-2. Information technology. OMG Unified Modeling Language (OMG UML) Version 2.1.2. Part 2. Superstructure
08/30193743 DC 08/30193743 DC. BS ISO/IEC 19505-1. Information technology. OMG Unified Modeling Language (OMG UML) Version 2.1.2. Part 1. Infrastructure
08/30193715 DC 08/30193715 DC. BS EN 62246-1. Reed switches. Part 1. Generic specification
08/30193706 DC 08/30193706 DC. BS EN 61300-2-47. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-47. Tests. Thermal shocks
08/30193653 DC 08/30193653 DC. BS ISO 17123-1. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
08/30193650 DC 08/30193650 DC. BS ISO 2631-4 AMD1. Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration. Part 4. Guidlines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
08/30193639 DC 08/30193639 DC. BS EN ISO 105-C06. Textiles. Tests for colour fastness. Part C06. Colour fastness to domestic and commercial laundering
CWA 15893-2:2008 CWA 15893-2:2008. European e-competence framework. User guidelines. Version 1.0
CWA 15893-1:2008 CWA 15893-1:2008. European e-competence framework. The Framework. Version 1.0
08/30193565 DC 08/30193565 DC. BS EN 61784-5. Industrial communication networks. Profiles. Part 5. Installation of fieldbuses
08/30193511 DC 08/30193511 DC. BS EN 61508-4. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 4. Definitions and abbreviations
08/30193510 DC 08/30193510 DC. BS EN 61508-3. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 3. Software requirements
08/30193509 DC 08/30193509 DC. BS EN 61508-2. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 2. Requirements for electrical/electronic/programmable electronic safety-related systems
08/30193508 DC 08/30193508 DC. BS EN 61508-1. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 1. General requirements
08/30193485 DC 08/30193485 DC. BS ISO 17212. Structural adhesives. Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
08/30193478 DC 08/30193478 DC. BS EN 61508-7. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 7. Overview of techniques and measures
08/30193474 DC 08/30193474 DC. BS EN 61508-5. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 5. Examples of methods for the determination of safety integrity levels
08/30193470 DC 08/30193470 DC. BS EN 61508-6. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 6. Guidelines on the application of IEC 61508-2 and IEC 61508-3
08/30193443 DC 08/30193443 DC. BS EN ISO 11701. Vegetable fats and oils. Determination of phospholipids in lecithins by high performance liquid chromatography (HPLC) using a light scattering detector
08/30193440 DC 08/30193440 DC. BS EN 60335-2-72. Household and similar electrical appliances. Safety. Part 2-72. Particular requirements for automatic machines for floor treatment for commercial and industrial use
08/30193437 DC 08/30193437 DC. BS EN 4540. Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-luricating liner. Elevated load under low oscillations. Technical specification
08/30193419 DC 08/30193419 DC. BS ISO 17631 AMD1. Ships and marine technology. Shipboard plans for fire protection, life saving appliances and means of escape
08/30193356 DC 08/30193356 DC. BS ISO 8724. Cork decorative panels. Specification
08/30193331 DC 08/30193331 DC. BS EN 3475-307. Aerospace series. Cables, aircraft use. Test methods. Part 307. Corona extinction voltage
08/30193326 DC 08/30193326 DC. BS EN 50377-14-1. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 14-1. Patch cords with EN 60793-2-50 single mode category B1.1 and B1.3 fibre for category C
08/30193237 DC 08/30193237 DC. BS EN 50528. Insulating ladders for use on or near low voltage electrical installations
08/30193158 DC 08/30193158 DC. BS EN ISO 12966-3. Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters. Part 3. Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH)
08/30193157 DC 08/30193157 DC. BS EN ISO 13628-1 AMD2. Petroleum and natural gas industries. Design and operation of subsea production systems. Part 1. General requirements and recommendations
08/30193145 DC 08/30193145 DC. BS EN ISO 13628-1 AMD1. Petroleum and natural gas industries. Design and operation of subsea production systems. Part 1. General requirements and recommendations
ISO/IEC15444-12 : 2008 EDTN3 ISO/IEC15444-12 : 2008 EDTN3. ISO/IEC15444-12 : 2008 Information technology JPEG 2000 image coding system. Part 12:ISO base media file format
ISO/IEC24757 : 2008 EDTN1 ISO/IEC24757 : 2008 EDTN1. ISO/IEC24757 : 2008 Information technology Keyboard interaction model Machine-readable keyboard description
08/30193112 DC 08/30193112 DC. BS EN 60870-5-6. Telecontrol equipment and systems. Part 5-6. Guidelines for conformance testing for the IEC 60870-5 companion standards
08/30193108 DC 08/30193108 DC. BS EN ISO 2440 AMD1. Flexible and rigid cellular polymeric materials. Accelerated aging tests
08/30193101 DC 08/30193101 DC. BS EN 50377-4-2. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 4-2. Type SC/APC simplex 8° terminated on IEC 60793-2-50 category B1.1 and B1.3 Single mode fibre, with full zirconia ferrule Category U
08/30192887 DC 08/30192887 DC. BS ISO/IEC 24791-6. Information technology. Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 6. Security
08/30192819 DC 08/30192819 DC. BS EN 50428 AMD2. Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building electronic systems (HBES)
08/30192816 DC 08/30192816 DC. BS ISO/IEC 12785-1. Information technology. Learning, education, and training. Content packaging. Part 1. Information model
BS EN 15287-2:2008 BS EN 15287-2:2008. Chimneys. Design, installation and commissioning of chimneys. Chimneys for roomsealed appliances
BS EN 15287-1:2007 BS EN 15287-1:2007. Chimneys. Design, installation and commissioning of chimneys. Chimneys for non-roomsealed heating appliances
08/30192771 DC 08/30192771 DC. BS EN 60704-2-2. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 2-2. Particular requirements for fan heaters
08/30192767 DC 08/30192767 DC. BS EN 62301. Household electrical appliances. Management of standby power
08/30192726 DC 08/30192726 DC. BS EN 1538. Execution of special geotechnical work. Diaphragm walls
08/30192723 DC 08/30192723 DC. BS EN 1536. Execution of special geotechnical work. Bored piles
08/30192697 DC 08/30192697 DC. BS ISO/IEC 9797-1. Information technology. Security techniques. Message authentication codes (MACs). Part 1. Mechanisms using a block cipher
ISO/IEC14496-12 : 2008 EDTN3 ISO/IEC14496-12 : 2008 EDTN3. ISO/IEC 14496-12:2008 Information technology. Coding of audio-visual objects. Part 12: ISO base media file format
08/30192677 DC 08/30192677 DC. BS EN 6059-307. Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Part 307. Ageing
08/30192674 DC 08/30192674 DC. BS EN 6059-100. Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Part 100. General
08/30192668 DC 08/30192668 DC. BS EN 62541-10. OPC Unified Architecture Specification. Part 10. Programs
08/30192664 DC 08/30192664 DC. BS EN 62541-9. OPC Unified Architecture Specification. Part 9. Alarms and Conditions
08/30192660 DC 08/30192660 DC. BS EN 62541-7. OPC Unified Architecture Specification. Part 7. Profiles
08/30192648 DC 08/30192648 DC. BS EN 6049-007. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Part 007. Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from -55°C to 260°C. Product Standard
08/30192448 DC 08/30192448 DC. BS ISO 14708-5. Implants for surgery. Active implantable medical devices. Part 5. Circulatory support devices
08/30192315 DC 08/30192315 DC. BS EN 62604-2. Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers. Part 2. Guide to the use
08/30192301 DC 08/30192301 DC. BS EN 60384-26. Fixed capacitors for use in electronic equipment. Part 26. Sectional specification. Aluminium electrolytic capacitors with conductive polymer solid electrolyte
08/30192293 DC 08/30192293 DC. BS EN 60086-5 AMD1. Primary batteries. Part 5. Safety of batteries with aqueous electrolyte
08/30192288 DC 08/30192288 DC. BS EN ISO 179-1. Plastics. Determination of Charpy impact properties. Part 1. Non-instrumented impact test
08/30192282 DC 08/30192282 DC. BS EN 3155-002. Aerospace series. Electrical contacts used in elements of connection. Part 002. List and utilization of contacts
08/30192276 DC 08/30192276 DC. BS ISO 22009. Space systems. Space environment (natural and artificial). Model of the Earth's magnetospheric magnetic field
08/30192272 DC 08/30192272 DC. BS EN 60335-1 AMD F4. Household and similar electrical appliances. Safety. Part 1. General requirements
08/30192264 DC 08/30192264 DC. BS EN 60335-1 AMD F3. Household and similar electrical appliances. Safety. Part 1. General requirements
08/30192250 DC 08/30192250 DC. BS EN 60335-1 AMD F2. Household and similar electrical appliances. Safety. Part 1. General requirements
08/30192220 DC 08/30192220 DC. BS EN 60335-1 AMD F1. Household and similar electrical appliances. Safety. Part 1. General requirements
08/30192184 DC 08/30192184 DC. BS ISO 15928-4. Houses. Description of performance. Part 4. Fire safety
08/30192173 DC 08/30192173 DC. BS EN 62542. Environmental standardization for electrical and electronic products and systems. Standardization of environmental aspects. Glossary of terms
08/30192124 DC 08/30192124 DC. BS ISO/IEC 23000-4 AMD2. Information technology. Multimedia application format (MPEG-A). Part 4. Musical slide show application format
08/30192115 DC 08/30192115 DC. BS EN 4473. Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification
08/30192094 DC 08/30192094 DC. BS EN 3911. Aerospace series. Six lobe recess. Geometrical definition
BS EN 378-1:2008 BS EN 378-1:2008. Refrigerating systems and heat pumps. Safety and environmental requirements. Basic requirements, definitions, classification and selection criteria
08/30192048 DC 08/30192048 DC. BS EN 13751. Foodstuffs. Detection of irradiated food using photostimulated luminescence
08/30191997 DC 08/30191997 DC. BS ISO 1043-1. Plastics. Symbols and abbreviated terms. Part 1. Basic polymers and their special characteristics
08/30191994 DC 08/30191994 DC. BS ISO 8566-1. Cranes. Cabins and control stations. Part 1. General
08/30191991 DC 08/30191991 DC. BS ISO 8566-3. Cranes. Cabins and control stations. Part 3. Tower cranes
08/30191907 DC 08/30191907 DC. BS EN 13623. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella pneumophila of chemical disinfectants for aqueous systems. Test method and requirements (phase 2, step 1)
08/30191902 DC 08/30191902 DC. BS EN 61204-7 AMD1. Low voltage power supplies, D.C. output. Part 7. Safety requirements
08/30191891 DC 08/30191891 DC. BS EN 61936-1. Power installations exceeding 1 kV A.C. Part 1. Common rules
08/30191883 DC 08/30191883 DC. BS EN 60401-2. Terms and nomenclature for cores made of magnetically soft ferrite. Part 2. Reference of dimensions
08/30191879 DC 08/30191879 DC. BS EN 3838. Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
BS EN ISO 638:2008 BS EN ISO 638:2008. Paper, board and pulps. Determination of dry matter content. Oven-drying method
08/30191664 DC 08/30191664 DC. BS EN 50522. Earthing of power installations exceeding 1 kV A.C
BS EN ISO 5182:2009 BS EN ISO 5182:2009. Resistance welding. Materials for electrodes and ancillary equipment
08/30191626 DC 08/30191626 DC. BS ISO 27186. Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
08/30191609 DC 08/30191609 DC. BS ISO 14708-6. Implants for surgery. Active implantable medical devices. Part 6. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
08/30191606 DC 08/30191606 DC. BS ISO 24917. Space systems. General test requirements for launch vehicles
08/30191603 DC 08/30191603 DC. BS ISO 17103. Agricultural machinery. Rotary disc mowers, rotary drum mowers and flail mowers. Test methods and acceptance criteria for protective skirts
08/30191462 DC 08/30191462 DC. BS ISO 11783-14. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 14. Sequence control
08/30191453 DC 08/30191453 DC. BS EN 50527-1. Assessment of human exposure at the workplace for persons bearing active implantable medical devices (AIMD) in electric, magnetic and electromagnetic fields with frequencies from 0 Hz to 300 GHz. Part 1. General
08/30191444 DC 08/30191444 DC. BS ISO 18334. Pallets for materials handling. Quality of assembly of new, wooden, flat pallets
ISO/TR11954 : 2008 EDTN1 ISO/TR11954 : 2008 EDTN1. ISO/TR11954 : 2008 Fuel cell road vehicles. Maximum speed measurement
08/30191438 DC 08/30191438 DC. BS EN 527-1. Office furniture. Work tables and desks. Part 1. Dimensions
08/30191365 DC 08/30191365 DC. BS EN 50388. Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
08/30191345 DC 08/30191345 DC. BS EN 60728-11. Cable networks for television signals, sound signals and interactive services. Part 11. Safety
08/30191341 DC 08/30191341 DC. BS EN 60670-24 AMD1. Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 24. Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
BS 31100:2008 BS 31100:2008. Risk management. Code of practice
08/30191327 DC 08/30191327 DC. BS EN 61029-2-8 AMD. Safety of transportable motor-operated electric tools. Part 2-8. Particular requirements for single spindle vertical moulders
08/30191324 DC 08/30191324 DC. BS EN 61029-2-1 AMD. Safety of transportable motor-operated electric tools. Part 2-1. Particular requirements for circular saw benches
08/30191292 DC 08/30191292 DC. BS EN 62077. Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
08/30191289 DC 08/30191289 DC. BS EN 50304/60350 AMD. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
08/30191281 DC 08/30191281 DC. BS EN 60320-2-4 AMD1. Appliance couplers for household and similar general purposes. Part 2-4. Appliance couplers dependent on appliance weight for engagement
08/30191273 DC 08/30191273 DC. BS EN 61977. Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification
08/30191251 DC 08/30191251 DC. BS EN 62553. Methods of measurement for digital network. Performance characteristics of terrestrial digital multimedia transmission network
08/30191241 DC 08/30191241 DC. BS EN 60444-6. Measurement of quartz crystal unit parameters. Part 6. Measurement of drive level dependence (DLD)
08/30191216 DC 08/30191216 DC. BS 8523. Operation and management of wardens scheme. Code of practice
08/30191192 DC 08/30191192 DC. BS EN 60079-20-1. Explosive atmospheres. Part 20-1. Material characteristics. Gas and vapour classification, test methods and data
08/30191187 DC 08/30191187 DC. BS EN 62358. Ferrite cores. Standard inductance factor (AL) and its tolerance
08/30191168 DC 08/30191168 DC. BS EN 60679-6. Quartz crystal controlled oscillators of assessed quality. Part 6. Phase jitter measurement method for quartz crystal oscillators and SAW oscillators. Application guide
08/30191166 DC 08/30191166 DC. BS EN 60079-25. Explosive atmospheres. Part 25. Intrinsically safe systems
BS 10008:2008 BS 10008:2008. Evidential weight and legal admissibility of electronic information. Specification
08/30191159 DC 08/30191159 DC. BS EN 15886. Conservation of cultural property. Test methods. Colour measurement of surfaces
08/30191156 DC 08/30191156 DC. BS EN 1555-5. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 5. Fitness for purpose of the system
08/30191153 DC 08/30191153 DC. BS EN 1555-4. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 4. Valves
08/30191150 DC 08/30191150 DC. BS EN 1555-3. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings
08/30191147 DC 08/30191147 DC. BS EN 1555-2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 2. Pipes
08/30191143 DC 08/30191143 DC. BS EN 1555-1. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 1. General
08/30191140 DC 08/30191140 DC. BS EN 13445-4:2002 AMD4. Unfired pressure vessels. Part 4. Fabrication
08/30191137 DC 08/30191137 DC. BS EN 71-1 AMD10. Safety of toys. Part 1. Mechanical and physical properties
08/30191123 DC 08/30191123 DC. BS ISO 9362. Banking. Banking telecommunication messages. Bank identifier codes
08/30191001 DC 08/30191001 DC. BS ISO 26433. Digital cinema (D-cinema). XML data types
08/30190998 DC 08/30190998 DC. BS ISO 26431-2. Digital cinema (D-cinema) quality. Part 2. Reference projector and environment
08/30190995 DC 08/30190995 DC. BS ISO 26430-9. Digital cinema (D-cinema) operations. Part 9. Key delivery bundle
08/30190992 DC 08/30190992 DC. BS ISO 26430-6. Digital cinema (D-cinema) operations. Part 6. Auditorium security messages for intra-theater communications
08/30190989 DC 08/30190989 DC. BS ISO 26430-5. Digital cinema (D-cinema) operations. Part 5. Packaging. Security log event class and constraints
08/30190986 DC 08/30190986 DC. BS ISO 26430-4. Digital cinema (D-cinema) operations. Part 4. Log records format
08/30190983 DC 08/30190983 DC. BS ISO 26429-10. Digital cinema (D-cinema) packaging. Part 10. Stereoscopic picture track file
08/30190980 DC 08/30190980 DC. BS ISO 26429-9. Digital cinema (D-cinema) packaging. Part 9. Asset mapping and file segmentation
08/30190977 DC 08/30190977 DC. BS ISO 26429-8. Digital cinema (D-cinema) packaging. Part 8. Packing list
08/30190974 DC 08/30190974 DC. BS ISO 26428-9. Digital cinema (D-cinema) distribution master. Part 9. Image pixel structure level 3. Serial digital interface signal formatting
08/30190971 DC 08/30190971 DC. BS ISO 26428-7. Digital cinema (D-cinema) distribution master. Part 7. Subtitle
08/30190962 DC 08/30190962 DC. BS ISO 3213. Polypropylene (PP) pipes. Effect of time and temperature on expected strength
08/30190957 DC 08/30190957 DC. BS ISO 24617-1. Language resource management. Semantic annotation framework (SemAF). Part 1. Time and events
08/30190915 DC 08/30190915 DC. BS EN 60745-2-4 AMD. Hand-held motor operated electric tools. Safety. Part 2-4. Particular requirements for sanders and polishers other than disk type
08/30190912 DC 08/30190912 DC. BS EN 60745-2-3 AMD. Hand-held motor operated electric tools. Safety. Part 2-3. Particular requirements for grinders, polishers and disk-type sanders
08/30190909 DC 08/30190909 DC. BS EN 60745-2-21 AMD. Hand-held motor operated electric tools. Safety. Part 2-21. Particular requirements for drain cleaners
08/30190906 DC 08/30190906 DC. BS EN 60745-2-20 AMD. Hand-held motor operated electric tools. Safety. Part 2-20. Particular requirements for band saws
08/30190901 DC 08/30190901 DC. BS EN 60745-2-18 AMD. Hand-held motor operated electric tools. Safety. Part 2-18. Particular requirements for strapping tools
08/30190898 DC 08/30190898 DC. BS EN 60745-2-14 AMD. Hand-held motor-operated electric tools. Safety. Part 2-14. Particular requirements for planers
08/30190894 DC 08/30190894 DC. BS EN 60745-2-9 AMD. Hand-held motor operated electric tools. Safety. Part 2-9. Particular requirements for tappers
08/30190887 DC 08/30190887 DC. BS EN 60745-2-8 AMD. Hand-held motor operated electric tools. Safety. Part 2-8. Particular requirements for shears and nibblers
08/30190852 DC 08/30190852 DC. BS EN 61000-4-21. Electromagnetic compatibility (EMC). Part 4-21. Testing and measurement techniques. Reverberation chamber test methods
ISO29469 : 2008 EDTN1 ISO29469 : 2008 EDTN1. ISO29469 : 2008 Thermal insulating products for building applications - Determination of compression behaviour
PD ISO/TR 28682:2008 PD ISO/TR 28682:2008. Intelligent transport systems. Joint APEC-ISO study of progress to develop and deploy ITS standards
08/30190684 DC 08/30190684 DC. BS ISO 18436-5. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Part 5. Lubricant laboratory technician/analyst
08/30190670 DC 08/30190670 DC. BS ISO 29681. Pulps. Determination of pH of salted water extracts
08/30190667 DC 08/30190667 DC. BS ISO 17267. Intelligent transport systems (ITS). Navigation system application program interface (API)
08/30190666 DC 08/30190666 DC. BS ISO 7752-1. Cranes. Controls. Layout and characteristics. Part 1. General principles
08/30190664 DC 08/30190664 DC. BS ISO 7752-1. Cranes. Controls. Layout and characteristics. Part 1. General principles
08/30190663 DC 08/30190663 DC. BS ISO 7752-3. Cranes. Controls. Layout and characteristics. Part 3. Tower cranes
08/30190661 DC 08/30190661 DC. BS ISO 7752-3. Cranes. Controls. Layout and characteristics. Part 3. Tower cranes
08/30190636 DC 08/30190636 DC. BS ISO 10961. Gas cylinders. Cylinder bundles. Design, manufacture, identification and testing
08/30190628 DC 08/30190628 DC. BS ISO 21507. Earth-moving machinery. Performance requirements for nonmetallic fuel tanks
08/30190554 DC 08/30190554 DC. BS ISO 10545-16. Ceramic tiles. Part 16. Determination of small colour differences
08/30190551 DC 08/30190551 DC. BS ISO 10545-6. Ceramic tiles. Part 6. Determination of resistance to deep abrasion for unglazed tiles
08/30190548 DC 08/30190548 DC. BS EN ISO 17054. Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
08/30190530 DC 08/30190530 DC. BS ISO 14487-2. Pulps. Standard water for physical testing. Part 2. Conductivity 40 mS/m to 150 mS/m
08/30190508 DC 08/30190508 DC. BS ISO 12643-4. Graphic technology. Safety requirements for graphic technology equipment and systems. Part 4. Converting equipment and systems
08/30190505 DC 08/30190505 DC. BS ISO 12643-1. Graphic technology. Safety requirements for graphic technology equipment and systems. Part 1. General requirements
08/30190502 DC 08/30190502 DC. BS ISO 18393-1. Thermal insulation products. Determination of ageing by settlement. Part 1. Blown loose fill for ventilated attics
08/30190494 DC 08/30190494 DC. BS ISO 5351. Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
08/30190491 DC 08/30190491 DC. BS ISO 11702. Animal and vegetable fats and oils. Enzymatic determination of total sterols content
BS EN 12602:2008 BS EN 12602:2008. Prefabricated reinforced components of autoclaved aerated concrete
BIP 2181:2008 BIP 2181:2008. Guide to PAS 2050. How to assess the carbon footprint of goods and services
08/30190352 DC 08/30190352 DC. BS EN ISO 105-D01. Textiles. Tests for colour fastness. Part D01. Colour fastness to dry cleaning using perchloroethylene solvent
08/30190329 DC 08/30190329 DC. BS EN 10238. Automatically blast-cleaned and automatically prefabrication primed structural steel products
08/30190311 DC 08/30190311 DC. BS EN 12953-6. Shell boilers. Part 6. Requirements for equipment for the boiler
08/30190305 DC 08/30190305 DC. BS EN 15885. Classification and performance characteristics of techniques for renovation and repair of drains and sewers
08/30190302 DC 08/30190302 DC. BS EN 13044-3. Swap bodies. Marking. Part 3. Other operational marks
08/30190299 DC 08/30190299 DC. BS EN 13044-2. Swap bodies. Marking. Part 2. Markings related to rail operation
08/30190296 DC 08/30190296 DC. BS EN 13044-1. Swap bodies. Marking. Part 1. Markings for identification
BIP 0026:2008 BIP 0026:2008. The complete ISMS Documentation Toolkit CD-ROM and book. A Manager's Guide to Data Security and ISO 27001/ISO 27002
08/30190263 DC 08/30190263 DC. BS EN ISO 11960. Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
08/30190258 DC 08/30190258 DC. BS EN 62106. Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz (TA1)
BS ISO 12643-3:2008 BS ISO 12643-3:2008. Graphic technology. Safety requirements for graphic technology equipment and systems. Binding and finishing equipment and systems
08/30190191 DC 08/30190191 DC. BS EN 60947-4-3 AMD2. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. AC semiconductor motor controllers and contactors for non-motor loads
08/30190185 DC 08/30190185 DC. BS EN 60947-4-2. Low-voltage switchgear and controlgear. Part 4-2. Contactors and motor-starters. AC semiconductor motor controllers and starters
08/30190180 DC 08/30190180 DC. BS ISO 9533. Earth-moving machinery. Machine-mounted audible travel alarms. Test methods and performance criteria
CWA 15884:2008 CWA 15884:2008. Environmental technology verification. Soil and groundwater site characterization, monitoring and remediation technologies
08/30190157 DC 08/30190157 DC. BS EN ISO 14644-9. Cleanrooms and associated controlled environments. Part 9. Classification of surface particle cleanliness
08/30190132 DC 08/30190132 DC. BS EN ISO 1874-2 AMD1. Plastics. Polyamide (PA) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
08/30190127 DC 08/30190127 DC. BS ISO 16853. Textile machinery. Sliver cans, rectangular. Main dimensions and tolerances
08/30190109 DC 08/30190109 DC. BS ISO 4866. Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
08/30190107 DC 08/30190107 DC. BS ISO/IEC 29199-2. Information technology. JPEG XR image coding system. Part 2. JPEG XR image coding specification
08/30190093 DC 08/30190093 DC. BS EN 50377-7-4. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 7-4. LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with full zirconia ferrule for Category C
08/30190078 DC 08/30190078 DC. BS ISO 26142. Hydrogen detector
DD IEC/PAS 62588:2008 DD IEC/PAS 62588:2008. Marking and labeling of components, PCBs and PCBAs to identify lead(Pb), Pb-free and other attributes
08/30190043 DC 08/30190043 DC. BS ISO 8789. Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
08/30190030 DC 08/30190030 DC. BS EN 60191-6-21. Mechanical standardization of semiconductor devices. Part 6-21. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline packages (SOP)
08/30190026 DC 08/30190026 DC. BS EN 60191-6-20. Mechanical standardization of semiconductor devices. Part 6-20. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline J-lead packages (SOJ)
08/30190022 DC 08/30190022 DC. BS EN 60865-1. Short-circuit currents. Calculation of effects. Part 1. Definitions and calculation methods
08/30189974 DC 08/30189974 DC. BS EN 13245-1. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Part 1. Designation of PVC-U profiles
08/30189962 DC 08/30189962 DC. BS EN 13743. Safety requirements for coated abrasive products
08/30189949 DC 08/30189949 DC. BS EN 61558-2-20. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-20. Particular requirements and tests for small reactors
08/30189945 DC 08/30189945 DC. BS EN 61558-2-12. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-12. Particular requirements and tests for constant voltage transformers and power supply units incorporating constant voltages transformers
08/30189894 DC 08/30189894 DC. BS EN ISO 17264. Road transport and traffic telematics. Automatic vehicle and equipment identification. Interfaces
08/30189890 DC 08/30189890 DC. BS EN 61243-1 AMD1. Live working. Voltage detectors. Part 1. Capacitive type to be used for voltages exceeding 1 kV A.C.
08/30189886 DC 08/30189886 DC. BS EN ISO 14906. Road transport and traffic telematics. Electronic fee collection. Application interface definition for dedicated short-range communication
08/30189882 DC 08/30189882 DC. BS EN 60630 AMD6. Maximum lamp outlines for incandescent lamps
08/30189878 DC 08/30189878 DC. BS EN 60064 AMD5. Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements. General
08/30189871 DC 08/30189871 DC. BS EN 62216. Digital terrestrial television receivers for the DVT-B system
08/30189842 DC 08/30189842 DC. BS ISO 11012. Heavy commercial vehicles and buses. Open-loop test methods for quantification of on-centre handling. Weave test and transition test
08/30189820 DC 08/30189820 DC. BS EN ISO 8253-1. Acoustics. Audiometric test methods. Part 1. Basic pure-tone air and bone conduction threshold audiometry
08/30189758 DC 08/30189758 DC. BS EN 50377-13-3. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 13-3. Type LX.5-APC DUPLEX terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule Category U
08/30189753 DC 08/30189753 DC. BS EN 50377-13-2. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 13-2. Type LX.5-PC DUPLEX terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule Category U
08/30189750 DC 08/30189750 DC. BS EN 4675. Aerospace series. Titanium. Ti 5Al 5Mo 5V 3Cr 0.4Fe. 1300 MPa ≤ Rm ≤ 1400 MPa. Bars. De $OL 110 mm
08/30189740 DC 08/30189740 DC. BS ISO IEC 24791-1. Information technology. Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 1. Architecture
08/30189644 DC 08/30189644 DC. BS ISO 28198. Animal and vegetable fats and oils. Determination of toluene insoluble matter
08/30189634 DC 08/30189634 DC. BS EN 14033-1. Railway applications. Track. Railbound construction and maintenance machines. Part 1. Technical requirements for running
08/30189631 DC 08/30189631 DC. BS EN 50215. Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
08/30189628 DC 08/30189628 DC. BS EN 10257-2. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 2. Submarine cables
08/30189625 DC 08/30189625 DC. BS EN 10257-1. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables Part 1. Land cables
08/30189622 DC 08/30189622 DC. BS EN 10223-8. Steel wire and wire products for fences. Part 8. Welded mesh gabion products
08/30189619 DC 08/30189619 DC. BS EN 10223-7. Steel wire and wire products for fences. Part 7. Steel wire welded panels for fencing
08/30189616 DC 08/30189616 DC. BS EN 10223-6. Steel wire and wire products for fences. Part 6. Steel wire chain link fencing
08/30189613 DC 08/30189613 DC. BS EN 10223-5. Steel wire and wire products for fences. Part 5. Steel wire woven hinged joint and knotted mesh fencing
08/30189610 DC 08/30189610 DC. BS EN 10223-4. Steel wire and wire products for fences. Part 4. Steel wire welded mesh fencing
08/30189607 DC 08/30189607 DC. BS EN 10223-3. Steel wire and wire products for fences. Part 3. Hexagonal steel wire mesh products for engineering purposes
08/30189604 DC 08/30189604 DC. BS EN 10223-2. Steel wire and wire products for fences. Part 2. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
08/30189601 DC 08/30189601 DC. BS EN 10223-1. Steel wire and wire products for fences. Part 1. Zinc and zinc-alloy coated steel barbed wire
08/30189593 DC 08/30189593 DC. BS EN 12846-1. Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Part 1. Bituminous emulsions
08/30189590 DC 08/30189590 DC. BS EN 13074-1. Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bitumen by evaporation
08/30189584 DC 08/30189584 DC. BS EN 13074-2. Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsion or cut-back or fluxed bitumen after recovery
08/30189566 DC 08/30189566 DC. BS EN 14825. Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions
08/30189563 DC 08/30189563 DC. BS EN 15879-1. Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling. Part 1. Direct exchange-to-water heat pumps
BIP 2082:2008 BIP 2082:2008. Electrician's Guide to the Building Regulations Part P. 2nd Edition
08/30189495 DC 08/30189495 DC. BS EN ISO 9117-3. Paints and varnishes. Drying tests. Part 3. Surface-drying test using ballotini
08/30189484 DC 08/30189484 DC. BS EN ISO 9117-2. Paints and varnishes. Drying tests. Part 2. Pressure test for stackability
08/30189444 DC 08/30189444 DC. BS ISO 28499-3. Buffalo hides and buffalo calf skins. Part 3. Grading on the basis of defects
08/30189441 DC 08/30189441 DC. BS ISO 28499-2. Buffalo hides and buffalo calf skins. Part 2. Grading on the basis of mass and size
08/30189438 DC 08/30189438 DC. BS ISO 28499-1. Buffalo hides and buffalo calf skins. Part 1. Description of defects
08/30189427 DC 08/30189427 DC. BS ISO/IEC 29141. Information technology. Tenprint Capture using BioAPI
08/30189407 DC 08/30189407 DC. BS EN 61512-4. Batch control. Part 4. Batch production records
08/30189351 DC 08/30189351 DC. BS EN 60793-1-41. Optical fibres. Part 1-41. Measurement methods and test procedures. Bandwidth
08/30189315 DC 08/30189315 DC. BS EN ISO 12099. Animal feedstuffs, cereals and milled cereal products. Guidelines for the application of near infrared spectrometry
08/30189288 DC 08/30189288 DC. BS EN 61076-2-107. Connectors for electronic equipment. Product requirements. Part 2–107. Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
08/30189276 DC 08/30189276 DC. BS EN 15875. Characterization of waste. Static test for determination of acid potential of sulfidic waste
08/30189270 DC 08/30189270 DC. BS EN 13236. Safety requirements for superabrasive products
08/30189237 DC 08/30189237 DC. BS EN 55016-2-3 AMD2. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
08/30189231 DC 08/30189231 DC. BS EN 55016-2-2 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-2. Methods of measurement of disturbances and immunity. Measurement of disturbance power
08/30189225 DC 08/30189225 DC. BS EN ISO 7783. Paints and varnishes. Determination of water-vapour transmission properties. Cup method
08/30189220 DC 08/30189220 DC. BS EN 55016-2-1 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of measurement of disturbances and immunity. Conducted disturbance measurements
08/30189214 DC 08/30189214 DC. BS EN 55016-1-1 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring apparatus
08/30189211 DC 08/30189211 DC. PD 6694-1. Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:2004
08/30189150 DC 08/30189150 DC. BS EN 13381-4. Test methods for determining the contribution to the fire resistance of structural members. Part 4. Applied passive protection products to steel members
08/30189118 DC 08/30189118 DC. BS EN 60317-58. Specifications for particular type of winding wires. Part 58. Polyamide-imide enameled rectangular copper wire, class 220
08/30189113 DC 08/30189113 DC. BS EN 60317-57. Specifications for particular type of winding wires. Part 57. Polyamide-imide enameled round copper wire, class 220
08/30189097 DC 08/30189097 DC. BS ISO 12968. Thermal insulation products for building applications. Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)
BIP 2177:2008 BIP 2177:2008. Hot and Cold Water Supply. 3rd edition
08/30189028 DC 08/30189028 DC. PAS 24 AMD1. Enhanced security performance requirements for door assemblies. Single and double leaf, hinged external door assemblies to dwellings
08/30189026 DC 08/30189026 DC. BS 10621 AMD1. Thief resistant dual-mode lock assembly
08/30189024 DC 08/30189024 DC. BS 8621 AMD1. Thief resistant lock assembly. Keyless egress
08/30188981 DC 08/30188981 DC. BS 3621 AMD1. Thief resistant lock assembly. Key egress
08/30188941 DC 08/30188941 DC. BS ISO 8301 AMD1. Thermal insulation. Determination of steady-state thermal resistance and related properties. Heat flow meter apparatus
08/30188936 DC 08/30188936 DC. BS EN ISO 16610-21. Geometrical product specifications (GPS). Filtration. Part 21. Linear profile filters. Gaussian filters
08/30188933 DC 08/30188933 DC. BS EN 15854. Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixing flow application. Non-isothermal procedure for a cold jet
08/30188907 DC 08/30188907 DC. BS EN 1317-6. Road restraint systems. Pedestrian restraint systems. Part 6. Pedestrian parapet
08/30188904 DC 08/30188904 DC. BS EN 14605 AMD1. Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
08/30188901 DC 08/30188901 DC. BS EN 13034 AMD1. Protective clothing against liquid chemicals. Performance requirements for chemical protective suits offering limited protective performance against liquid chemicals (Type 6 equipment)
08/30188887 DC 08/30188887 DC. BS EN 933-9. Tests for geometrical properties of aggregates. Part 9. Assessment of fines. Methylene blue test
08/30188882 DC 08/30188882 DC. BS EN 13523-29. Coil coated metals. Test methods. Part 29. Resistance to environmental soiling (Dirt pick-up and stripping)
08/30188879 DC 08/30188879 DC. BS EN 13523-8. Coil coated metals. Test methods. Part 8. Resistance to salt spray (fog)
08/30188855 DC 08/30188855 DC. BS EN ISO 10156. Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
08/30188848 DC 08/30188848 DC. BS EN 60904-10. Photovoltaic devices. Part 10. Methods of linearity measurement
08/30188842 DC 08/30188842 DC. BS EN 50525-3-41. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-41. Cables with special fire performance. Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke
08/30188839 DC 08/30188839 DC. BS EN 50525-3-31. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-31. Cables with special fire performance. Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
08/30188836 DC 08/30188836 DC. BS EN 50525-3-21. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-21. Cables with special fire performance. Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
08/30188833 DC 08/30188833 DC. BS EN 50525-3-11. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-11. Cables with special fire performance. Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
08/30188826 DC 08/30188826 DC. BS EN 50525-2-83. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-83. Cables for general applications. Multicore cables with crosslinked silicone rubber insulation
08/30188821 DC 08/30188821 DC. BS EN 50525-2-82. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-82. Cables for general applications. Cables with crosslinked elastomeric insulation for decorative chains
08/30188818 DC 08/30188818 DC. BS EN 50525-2-81. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-81. Cables for general applications. Cables with crosslinked elastomeric covering for arc welding
08/30188813 DC 08/30188813 DC. BS EN 50525-2-72. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-72. Cables for general applications. Flat divisible cables (cords) with thermoplastic PVC insulation
08/30188810 DC 08/30188810 DC. BS EN 50525-2-71. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-71. Cables for general applications. Flat tinsel cables (cords) with thermoplastic PVC insulation
08/30188804 DC 08/30188804 DC. BS EN 50525-2-51. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-51. Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation
08/30188799 DC 08/30188799 DC. BS EN 50525-2-42. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-42. Cables for general applications. Single core non-sheathed cables with crosslinked EVA insulation
08/30188796 DC 08/30188796 DC. BS EN 50525-2-41. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-41. Cables for general applications. Single core cables with crosslinked silicone rubber insulation
08/30188793 DC 08/30188793 DC. BS EN 50525-2-31. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-31. Cables for general applications. Single core non-sheathed cables with thermoplastic PVC insulation
08/30188788 DC 08/30188788 DC. BS EN 50525-2-22. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-22. Cables for general applications. High flexibility braided cables with crosslinked elastomeric insulation
08/30188786 DC 08/30188786 DC. BS IEC 60613. Electrical, thermal and loading characteristics of X-ray tube assemblies for medical diagnosis
08/30188783 DC 08/30188783 DC. BS EN 50525-2-21. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-21. Cables for general applications. Flexible cables with crosslinked elastomeric insulation
08/30188779 DC 08/30188779 DC. BS EN 50525-2-12. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-12. Cables for general applications. Extensible leads with thermoplastic PVC insulation
08/30188771 DC 08/30188771 DC. BS EN 50525-2-11. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-11. Cables for general applications. Flexible cables with thermoplastic PVC insulation
08/30188764 DC 08/30188764 DC. BS EN 50525-1. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 1. General requirements
08/30188684 DC 08/30188684 DC. BS ISO 7268. Pipe components. Definition and selection of PN, Class and K
08/30188504 DC 08/30188504 DC. BS ISO 3500 AMD1. Gas cylinders. Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
08/30188496 DC 08/30188496 DC. BS EN 61000-4-15. Electromagnetic compatibility (EMC). Part 4-15. Testing and measurement techniques. Flickermeter. Functional and design specifications
08/30188489 DC 08/30188489 DC. BS EN 54-27. Fire detection and fire alarm systems. Part 27. Duct smoke detectors
08/30188476 DC 08/30188476 DC. BS ISO 13584-32. Industrial automation systems and integration. Parts library. Part 32. Implementation resources. OntoML. Ontology markup language
08/30188464 DC 08/30188464 DC. BS EN 62317-2. Ferrite cores. Dimensions. Part 2. Pot-cores for use in telecommunications, power supply, and filter applications
08/30188443 DC 08/30188443 DC. BS EN 15876-1. Electronic fee collection. Conformity evaluation of on board unit and roadside equipment to EN 15509. Part 1. Test suite structure and test purposes
08/30188440 DC 08/30188440 DC. BS EN 1911. Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
08/30188437 DC 08/30188437 DC. BS EN 13766. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
08/30188330 DC 08/30188330 DC. BS EN ISO 178. Plastics. Determination of flexural properties
08/30188327 DC 08/30188327 DC. BS ISO 10935. Microscopes. Interfacing connection type C
BS ISO 10071-1:2008 BS ISO 10071-1:2008. Tools for pressing. Ball-lock punches. Ball-lock punches for light duty
08/30188248 DC 08/30188248 DC. BS EN 60512-9-3. Connectors for electronic equipment. Tests and measurements. Part 9-3. Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
08/30188245 DC 08/30188245 DC. BS EN 15851. Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
08/30188242 DC 08/30188242 DC. BS EN 15850. Foodstuffs. Determination of zearalenone in barley, maize and wheat flour, polenta and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
08/30188165 DC 08/30188165 DC. BS EN ISO 105-J03. Textiles. Tests for colour fastness. Part J03. Calculation of colour differences
08/30188146 DC 08/30188146 DC. BS EN 10169. Continuously organic coated (coil coated) steel flat products. Technical delivery conditions
08/30188125 DC 08/30188125 DC. BS EN 15269-3. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Part 3. Timber hinged and pivoted doorsets
BS ISO 3601-1:2008 BS ISO 3601-1:2008. Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes
08/30188055 DC 08/30188055 DC. BS EN 60904-4. Photovoltaic devices. Part 4. Procedure for establishing the traceability of the calibration of reference solar devices
BS EN 62233:2008 BS EN 62233:2008. Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
08/30187839 DC 08/30187839 DC. BS ISO 3779. Road vehicles. Vehicle identification number (VIN). Content and structure
08/30187838 DC 08/30187838 DC. BS ISO/IEC 14496-5 AMD22. Information technology. Coding of audio-visual objects. Part 5. Reference software for 3D Graphics Compression Model (3DGCM)
08/30187815 DC 08/30187815 DC. BS ISO 19713-1. Road vehicles. Inlet air cleaning equipment for internal combustion engines and compressors. Part 1. Fractional efficiency testing with fine particles (0,3 μ m to 5 μ m optical diameter)
08/30187804 DC 08/30187804 DC. BS EN ISO 2867. Earth-moving machinery. Access systems
08/30187781 DC 08/30187781 DC. BS EN ISO 10993-16. Biological evaluation of medical devices. Part 16. Toxicokinetic study design for degradation products and leachables
08/30187754 DC 08/30187754 DC. BS EN 1457-2. Chimneys. Clay ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods
08/30187751 DC 08/30187751 DC. BS EN 1457-1. Chimneys - Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods
08/30187745 DC 08/30187745 DC. BS EN 12566-6. Small wastewater treatment systems for up to 50 PT. Part 6. Prefabricated treatment units for septic tank effluent
08/30187719 DC 08/30187719 DC. BS EN 1493. Vehicle lifts
BS ISO 11903:2008 BS ISO 11903:2008. Tools for pressing. Guide pillar mountings
BS ISO 11900-2:2008 BS ISO 11900-2:2008. Tools for pressing. Ball-lock punch retainers. Types C and D, reduced for light duty
BS ISO 11900-2:2008 BS ISO 11900-2:2008. Tools for pressing. Ball-lock punch retainers. Types C and D, reduced for light duty
BS ISO 8406:2008 BS ISO 8406:2008. Tools for moulding. Mould bases. Round locating elements and spacers
08/30187690 DC 08/30187690 DC. BS ISO/IEC 29642. Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW DL format. Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4x)
08/30187688 DC 08/30187688 DC. BS ISO/IEC 17341. Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW format. Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4x)
08/30187686 DC 08/30187686 DC. BS ISO/IEC 17344. Information technology. Data interchange on 120 mm and 80 mm optical disk using +R format. Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16x)
08/30187684 DC 08/30187684 DC. BS ISO/IEC 12862. Information technology. 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
08/30187682 DC 08/30187682 DC. BS ISO/IEC 26925. Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW HS format. Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8x)
KIT 201 KIT 201. Guide to statistical process control (SPC) charts for variables
08/30187630 DC 08/30187630 DC. BS EN 60335-2-90 AMD1. Household and similar electrical appliances. Safety. Part 2-90. Particular requirements for commercial microwave ovens
08/30187623 DC 08/30187623 DC. BS EN 60335-2-25. Household and similar electrical appliances. Safety. Part 2-25. Particular requirements for microwave ovens, including combination microwave ovens
08/30187620 DC 08/30187620 DC. BS ISO 12924. Lubricants, industrial oils and related products (Class L). Family X (Greases). Specification
08/30187614 DC 08/30187614 DC. BS ISO/IEC 18000-7. Information technology AIDC techniques. Radio frequency identification for item management. Air interface. Part 7. Parameters for active air interface communications at 433 MHz
08/30187612 DC 08/30187612 DC. BS ISO/IEC 18000-2. Information technology AIDC techniques. RFID for item management. Air interface. Parameters for air interface. Part 2. Parameters for air interface communications below 135 kHz
08/30187610 DC 08/30187610 DC. BS ISO/IEC 15459-8. Information technology. Automatic identification and data capture techniques. Unique identification. Part 8. Grouping of transport units
ISO/IEC19776-2 : 2008 EDTN2 ISO/IEC19776-2 : 2008 EDTN2. ISO/IEC19776-2 : 2008 Information technology. Computer graphics, image processing and environmental data representation. Extensible 3D (X3D) encodings. Part 2: Classic VRML encoding
08/30187552 DC 08/30187552 DC. BS EN 13306. Maintenance. Maintenance terminology
08/30187544 DC 08/30187544 DC. BS EN 13765. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
08/30187521 DC 08/30187521 DC. BS EN 593. Industrial valves. Metallic butterfly valves
08/30187511 DC 08/30187511 DC. BS EN ISO 14406. Geometrical product specifications (GPS). Data extraction
08/30187483 DC 08/30187483 DC. BS EN 50122-3. Railway applications. Fixed installations. Electrical safety, earthing and bonding. Part 3. Mutual interaction of A.C. and D.C. traction systems
08/30187472 DC 08/30187472 DC. BS EN 62541-8. OPC Unified Architecture. Part 8. Data access
08/30187467 DC 08/30187467 DC. BS EN 62541-6. OPC Unified Architecture. Part 6. Mappings
08/30187463 DC 08/30187463 DC. BS EN 62541-5. OPC Unified Architecture. Part 5. Information model
08/30187457 DC 08/30187457 DC. BS EN 62541-4. OPC Unified Architecture. Part 4. Services
08/30187453 DC 08/30187453 DC. BS EN 62541-3. OPC Unified Architecture. Part 3. Address space model
08/30187449 DC 08/30187449 DC. BS EN 62541-2. OPC Unified Architecture. Part 2. Security model
08/30187445 DC 08/30187445 DC. BS EN 62541-1. OPC Unified Architecture. Part 1. Overview and concepts
BS ISO 10907-1:2008 BS ISO 10907-1:2008. Tools for moulding. Locating rings. Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
BS ISO 10907-1:2008 BS ISO 10907-1:2008. Tools for moulding. Locating rings. Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
08/30187424 DC 08/30187424 DC. BS EN 61347-2-7. Lamp controlgear. Part 2-7. Particular requirements for D.C. supplied electronic ballasts for emergency lighting
08/30187414 DC 08/30187414 DC. BS EN 60929. AC-supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
08/30187394 DC 08/30187394 DC. BS ISO 27205. Milk products. Acidifying starter cultures. Standard of identity
BS EN ISO 217:2008 BS EN ISO 217:2008. Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction
08/30187368 DC 08/30187368 DC. BS ISO 11365. Petroleum and related products. Maintenance and use guide for triaryl phosphate ester turbine control fluids
08/30187364 DC 08/30187364 DC. BS ISO 11366. Petroleum and related products. Guidance for in-service monitoring of lubricating oils for steam, gas and combined-cycle turbines
08/30187323 DC 08/30187323 DC. BS ISO 21873-2. Building construction machinery and equipment. Mobile crushers. Part 2. Safety requirements
BS EN 1176-7:2008 BS EN 1176-7:2008. Playground equipment and surfacing. Guidance on installation, inspection, maintenance and operation
BS EN 1176-6:2008 BS EN 1176-6:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for rocking equipment
BS EN 1176-5:2008 BS EN 1176-5:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for carousels
BS EN 1176-4:2008 BS EN 1176-4:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for cableways
BS EN 1176-3:2008 BS EN 1176-3:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for slides
BS EN 1176-2:2008 BS EN 1176-2:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for swings
BS EN 1176-1:2008 BS EN 1176-1:2008. Playground equipment and surfacing. General safety requirements and test methods
08/30187241 DC 08/30187241 DC. BS ISO 10975. Tractors and machinery for agriculture. Auto-guidance systems. Safety requirements
08/30187196 DC 08/30187196 DC. BS EN 1533. Wood and parquet flooring. Determination of bending strength under static load. Test methods
08/30187193 DC 08/30187193 DC. BS EN 15871. Ventilation for buildings. Fire resisting duct sections
BS ISO 6709:2008 BS ISO 6709:2008. Standard representation of geographic point location by coordinates
08/30187148 DC 08/30187148 DC. BS ISO 7289. Gas welding equipment. Quick-action couplings with shut-off valves for welding, cutting and allied processes
08/30187141 DC 08/30187141 DC. BS EN 61960. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
CWA 15748-62:2008 (Edition 2) CWA 15748-62:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Printer and scanning device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-9:2008 (Edition 2) CWA 15748-9:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Text terminal unit device class interface. Programmer's reference
CWA 15748-8:2008 (Edition 2) CWA 15748-8:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Depository device class interface. Programmer's reference
CWA 15748-74:2008 (Edition 2) CWA 15748-74:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash-in module device class interface. Migration from Version 3.02 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-73:2008 (Edition 2) CWA 15748-73:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Card embossing unit device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-72:2008 (Edition 2) CWA 15748-72:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Alarm device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-71:2008 (Edition 2) CWA 15748-71:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Camera device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-70:2008 (Edition 2) CWA 15748-70:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Vendor dependent mode device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-7:2008 (Edition 2) CWA 15748-7:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Check reader/scanner device class interface. Programmer's reference
CWA 15748-69:2008 (Edition 2) CWA 15748-69:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Sensors and indicators unit device class interface. Migration from Version 3.01 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-68:2008 (Edition 2) CWA 15748-68:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Text terminal unit device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-67:2008 (Edition 2) CWA 15748-67:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Depository device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-66:2008 (Edition 2) CWA 15748-66:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Check reader/scanner device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-65:2008 (Edition 2) CWA 15748-65:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. PIN keypad device class interface. Migration from Version 3.03 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-64:2008 (Edition 2) CWA 15748-64:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash dispenser device class interface. Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's Reference
CWA 15748-63:2008 (Edition 2) CWA 15748-63:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Identification card device class interface. Migration from Version 3.02 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-61:2008 (Edition 2) CWA 15748-61:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Application programming interface (API). Service provider. Interface (SPI). Migration from Version 3.0 (CWA 14050) to Version 3.10 (this CWA). Programmer's reference
CWA 15748-6:2008 (Edition 2) CWA 15748-6:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. PIN keypad device class interface. Programmer's reference
CWA 15748-5:2008 (Edition 2) CWA 15748-5:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash dispenser device class interface. Programmer's reference
CWA 15748-4:2008 (Edition 2) CWA 15748-4:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Identification card device class interface. Programmer's reference
CWA 15748-3:2008 (Edition 2) CWA 15748-3:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Printer and scanning device class interface. Programmer's reference
CWA 15748-2:2008 (Edition 2) CWA 15748-2:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Service class definition. Programmer's reference
CWA 15748-18:2008 (Edition 2) CWA 15748-18:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Item processing module device class interface. Programmer's reference
CWA 15748-17:2008 (Edition 2) CWA 15748-17:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Barcode reader device class interface. Programmer's reference
CWA 15748-16:2008 (Edition 2) CWA 15748-16:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Card dispenser device class interface. Programmer's reference
CWA 15748-15:2008 (Edition 2) CWA 15748-15:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash-in module device class interface. Programmer's reference
CWA 15748-14:2008 (Edition 2) CWA 15748-14:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Card embossing unit device class interface. Programmer's reference
CWA 15748-13:2008 (Edition 2) CWA 15748-13:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Alarm device class interface. Programmer's reference
CWA 15748-12:2008 (Edition 2) CWA 15748-12:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Camera device class interface. Programmer's reference
CWA 15748-11:2008 (Edition 2) CWA 15748-11:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Vendor dependent mode device class interface. Programmer's reference
CWA 15748-10:2008 (Edition 2) CWA 15748-10:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Sensors and indicators unit device class interface. Programmer's reference
CWA 15748-1:2008 (Edition 2) CWA 15748-1:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Application programming interface (API). Service provider. Interface (SPI). Programmer's reference
PAS 55-2:2008 PAS 55-2:2008. Asset management. Guidelines for the application of PAS 55-1
08/30187038 DC 08/30187038 DC. BS EN 55016-2-3 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
08/30187017 DC 08/30187017 DC. BS EN 60851-2. Winding wires. Test methods. Part 2. Determination of dimensions
08/30186990 DC 08/30186990 DC. BS EN 50523-2. Household appliances interworking. Part 2. Data structures
08/30186987 DC 08/30186987 DC. BS EN 50523-1. Household appliances interworking. Part 1. Functional specification
08/30186944 DC 08/30186944 DC. BS EN 12269-2. Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test. Part 2. Long term test
08/30186919 DC 08/30186919 DC. BS ISO 10298. Determination of toxicity of a gas or gas mixture
08/30186909 DC 08/30186909 DC. BS EN 255-3. Air conditioners. Liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 3. Testing and requirements for marking for domestic hot water units
08/30186903 DC 08/30186903 DC. BS EN 1014-4. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 4. Determination of the water-extractable phenols content of creosote
08/30186900 DC 08/30186900 DC. BS EN 1014-3. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 3. Determination of the benzo[a]pyrene content of creosote
08/30186896 DC 08/30186896 DC. BS EN 1014-2. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 2. Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
08/30186893 DC 08/30186893 DC. BS EN 1014-1. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 1. Procedure for sampling creosote
08/30186890 DC 08/30186890 DC. BS EN 12490. Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood
08/30186871 DC 08/30186871 DC. BS EN ISO 105-B08 AMD1. Textiles. Tests for colour fastness. Part B08. Quality control of blue wool reference materials 1 to 7
08/30186863 DC 08/30186863 DC. BS EN ISO 4414. Pneumatic fluid power. General rules and safety requirements for systems and their components
08/30186852 DC 08/30186852 DC. BS EN ISO 4413. Hydraulic fluid power. General rules and safety requirements for systems and their components
08/30186847 DC 08/30186847 DC. BS ISO 23232. Textiles. Aqueous liquid repellency. Water/alcohol solution resistance test
BIP 0009:2008 BIP 0009:2008. Evidential Weight and Legal Admissibility of Electronic Information. Compliance Workbook for Use with BS 10008
08/30186712 DC 08/30186712 DC. BS EN 60255-127. Measuring relays and protection equipment. Part 127. Functional standard for over/under voltage protection
08/30186708 DC 08/30186708 DC. BS EN 62496-3-1. Optical circuit boards. Performance standard. Part 3-1. Flexible optical circuit boards using unconnectorized optical glass fibres
08/30186704 DC 08/30186704 DC. BS EN 61851-1. Electric vehicle conductive charging system. Part 1. General requirements
08/30186692 DC 08/30186692 DC. BS ISO 24610-2. Language resource management. Feature structures. Part 2. Feature system declaration
08/30186620 DC 08/30186620 DC. BS EN 13381-7. Test methods for determining the contribution to the fire resistance of structural members. Part 7. Applied protection to timber members
08/30186617 DC 08/30186617 DC. BS EN 13381-6. Test methods for determining the contribution to the fire resistance of structural members. Part 6. Applied protection to concrete filled hollow steel columns
08/30186613 DC 08/30186613 DC. BS EN 13381-5. Test methods for determining the contribution to the fire resistance of structural members. Part 5. Applied protection to concrete/profiled sheet steel composite members
08/30186609 DC 08/30186609 DC. BS EN 13381-3. Test methods for determining the contribution to the fire resistance of structural members. Part 3. Applied protection to concrete members
08/30186605 DC 08/30186605 DC. BS EN 13381-2. Test methods for determining the contribution to the fire resistance of structural members. Part 2. Vertical protective membranes
08/30186575 DC 08/30186575 DC. BS EN 60079-15. Explosive atmospheres. Part 15. Equipment protection by type of protection "n"
08/30186475 DC 08/30186475 DC. BS EN 13617-1 AMD1. Petrol filling stations. Part 1. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
08/30186443 DC 08/30186443 DC. BS EN 15869-3. Inland navigation vessels. Electrical Shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 3. On-board unit, safety requirements
08/30186439 DC 08/30186439 DC. BS EN 15869-2. Inland navigation vessels. Electrical shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 2. Onshore unit, safety requirements
08/30186436 DC 08/30186436 DC. BS EN 15869-1. Inland navigation vessels. Electrical shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 1. General requirements
PD ISO/IEC TR 90005:2008 PD ISO/IEC TR 90005:2008. Systems engineering. Guidelines for the application of ISO 9001 to system life cycle processes
08/30186393 DC 08/30186393 DC. BS ISO/IEC 15444-1 AMD2. Information technology. JPEG 2000 image coding. Part 1. Core coding system
08/30186375 DC 08/30186375 DC. BS 88-3 AMD1. Low-voltage fuses. Part 3. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application). Examples of standardized systems of fuses A to F
08/30186371 DC 08/30186371 DC. BS 88-2 AMD1. Low-voltage fuses. Part 2. Supplementary requirements for fuses for use by authorised persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I
08/30186279 DC 08/30186279 DC. BS EN 50436-3. Alcohol interlocks. Test methods and performance requirements. Part 3. Guidance for decision makers, purchasers and users
08/30186267 DC 08/30186267 DC. BS ISO 12873. Determination of wax content in olive oils by capillary column gas chromatography
08/30186264 DC 08/30186264 DC. BS ISO 12872. Method for the determination of the percentage of 2-glyceryl monopalmitate in olive oils
08/30186256 DC 08/30186256 DC. BS ISO 12871. Determination of aliphatic alcohols content by capillary gas chromatography
BS ISO 16528-2:2007 BS ISO 16528-2:2007. Boilers and pressure vessels. Procedures for fulfilling the requirements of ISO 16528-1
BS ISO 16528-1:2007 BS ISO 16528-1:2007. Boilers and pressure vessels. Performance requirements
08/30186244 DC 08/30186244 DC. BS ISO 12188-1. Test procedure for positioning and guidance systems in agriculture. Part 1. Dynamic testing of satellite-based positioning devices
08/30186234 DC 08/30186234 DC. BS ISO 19111-2. Geographic information. Spatial referencing by coordinates. Part 2. Extension for parametric values
BIP 0008-3:2008 BIP 0008-3:2008. Evidential Weight and Legal Admissibility of Linking Electronic Identity to Documents. Code of Practice for the Implementation of BS 10008
BIP 0008-2:2008 BIP 0008-2:2008. Evidential Weight and Legal Admissibility of Information Communicated Electronically. Code of Practice for the Implementation of BS 10008
BIP 0008-1:2008 BIP 0008-1:2008. Evidential Weight and Legal Admissibility of Information Stored Electronically. Code of Practice for the Implementation of BS 10008
KIT 200 KIT 200. Standardized method of life cycle costing for construction (BS ISO 15686-5)
08/30186184 DC 08/30186184 DC. BS EN 61340-4-9. Electroststics. Part 4-9. Standard test methods for specific applications. Garments
08/30186166 DC 08/30186166 DC. BS EN 62275. Cable management systems. Cable ties for electrical installations
08/30186163 DC 08/30186163 DC. BS IEC 60092-306. Electrical installations in ships. Part 306. Equipment. Luminaires and lighting accessories
08/30186160 DC 08/30186160 DC. BS EN 3719. Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
08/30185977 DC 08/30185977 DC. BS EN 438-9. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Part 9. Classification and specifications for alternative core laminates
08/30185924 DC 08/30185924 DC. BS EN 1071-10. Advanced technical ceramics. Methods of test for ceramic coatings. Part 10. Determination of coating thickness by cross sectioning
08/30185921 DC 08/30185921 DC. BS EN 1071-9. Advanced technical ceramics. Methods of test for ceramic coatings. Part 9. Determination of fracture strain
08/30185918 DC 08/30185918 DC. BS EN 1006. Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
08/30185915 DC 08/30185915 DC. BS EN 820-5. Advanced technical ceramics. Thermomechanical properties of monolithic. Ceramics. Part 5. Determination of elastic moduli at elevated temperatures
08/30185909 DC 08/30185909 DC. BS EN 623-5. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Part 5. Determination of phase volume fraction by evaluation of micrographs
08/30185906 DC 08/30185906 DC. BS EN 820-4. Advanced technical ceramics. Thermomechanical properties of monolithic. Ceramics. Part 4. Determination of flexural creep deformation at elevated temperatures
08/30185875 DC 08/30185875 DC. BS EN 1097-8. Tests for mechanical and physical properties of aggregates. Part 8. Determination of the polished stone value
08/30185872 DC 08/30185872 DC. BS EN 933-10. Tests for geometrical properties of aggregates. Part 10. Assessment of fines. Grading of filler aggregates (air jet sieving)
08/30185866 DC 08/30185866 DC. BS EN 61000-3-15. Electromagnetic compatibility (EMC). Part 3-15. Limits. Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network
08/30185791 DC 08/30185791 DC. BS EN 15878. Steel static storage systems. Adjustable pallet racking. Terms and definitions
08/30185788 DC 08/30185788 DC. BS EN 15864. Characterisation of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
08/30185785 DC 08/30185785 DC. BS EN 15863. Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions
08/30185782 DC 08/30185782 DC. BS EN 15862. Characterization of waste. Compliance leaching test. One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
08/30185776 DC 08/30185776 DC. BS EN 1317-5 AMD2. Road restraint systems. Part 5. Product requirements and evaluation of conformity for vehicle restraint systems
08/30185760 DC 08/30185760 DC. BS EN 615. Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders)
08/30185757 DC 08/30185757 DC. BS EN 1856-2. Chimneys. Requirements for metal chimneys. Part 2. Metal flue liners and connecting flue pipes
08/30185727 DC 08/30185727 DC. BS EN ISO 14344. Welding and allied processes. Flux and gas shielded electrical welding processes. Procurement guidelines for consumables
08/30185700 DC 08/30185700 DC. BS EN 9300-115. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 115. Explicit CAD assembly structure
08/30185697 DC 08/30185697 DC. BS EN 9300-002. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 002. Requirements
08/30185694 DC 08/30185694 DC. BS EN 9300-005. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 005. Authentication and Verification
08/30185691 DC 08/30185691 DC. BS EN 9300-007. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 007. Terms and References
08/30185688 DC 08/30185688 DC. BS EN 9300-110. Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 110. CAD mechanical 3D Explicit geometry information
08/30185685 DC 08/30185685 DC. BS EN 9300-100. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 100. Common concepts for Long term archiving and retrieval of CAD 3D mechanical information
08/30185684 DC 08/30185684 DC. BS EN ISO 10360-7. Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 7. CMMs equipped with imaging probing systems
08/30185648 DC 08/30185648 DC. BS EN 60728-13. Cable networks for television signals, sound signals and interactive services. Part 13. Optical systems for broadcast signal transmissions (TA 5)
08/30185641 DC 08/30185641 DC. BS EN 60728-1-2. Cable networks for television signals, sound signals and interactive services. Part 1-2. Performance requirements for signals delivered at the system outlet in operation (TA 5)
08/30185633 DC 08/30185633 DC. BS EN 60728-1-1. Cable networks for television signals, sound signals and interactive services. Part 1-1. RF cabling for two way home networks (TA 5)
08/30185600 DC 08/30185600 DC. BS ISO 10643. Dimensions of accessories for cutting tools and their attachments
08/30185588 DC 08/30185588 DC. BS ISO 8153-1. Aerospace. Fluid systems and components. Part 1. Terminology of hose assemblies
08/30185535 DC 08/30185535 DC. BS EN ISO 1452-1. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). Part 1. General
08/30185468 DC 08/30185468 DC. BS ISO/IEC 20926. Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
BS EN ISO 11553-2:2008 BS EN ISO 11553-2:2008. Safety of machinery. Laser processing machines. Safety requirements for hand-held laser processing devices
BS EN ISO 11553-1:2008 BS EN ISO 11553-1:2008. Safety of machinery. Laser processing machines. General safety requirements
08/30185354 DC 08/30185354 DC. BS IEC CISPR 35. Electromagnetic Compatibility (EMC). Immunity standard for multimedia products
08/30185313 DC 08/30185313 DC. BS ISO 15622. Transport information and control systems. Adaptive cruise control systems. Performance requirements and test procedures
08/30185306 DC 08/30185306 DC. BS ISO 17386. Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures
08/30185299 DC 08/30185299 DC. BS EN 6049-006. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Part 006. Self-wrapping protective sleeve, flexible post installation. Product standard
08/30185288 DC 08/30185288 DC. BS ISO/IEC 22535. Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Tunnelling of QSIG over SIP
08/30185263 DC 08/30185263 DC. BS EN 62271-102 AMD1. High-voltage switchgear and controlgear. Part 102. Alternating current disconnectors and earthing switches
08/30185258 DC 08/30185258 DC. BS EN 60269-5. Low-voltage fuses. Part 5. Guidance for the application of low-voltage fuses
ISO/IEC10646 AMD4 (07/08) (CD-ROM)HEADER ISO/IEC10646 AMD4 (07/08) (CD-ROM)HEADER. ISO/IEC 10646 Information technology - Universal Multiple-Octet Coded Character Set (UCS)
08/30185236 DC 08/30185236 DC. BS EN 4673-006. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 006. In heat resisting steel FE-PA2601 (A286), MoS2 coated
08/30185233 DC 08/30185233 DC. BS EN 4673-005. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 005. In heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating
08/30185229 DC 08/30185229 DC. BS EN ISO 25745-1. Energy performance of lifts and escalators. Part 1. Energy measurement and conformance
08/30185224 DC 08/30185224 DC. BS EN 4673-004. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 004. In heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating
08/30185221 DC 08/30185221 DC. BS ISO 8811. Earth-moving machinery. Rollers and land-fill compactors. Terminology and commercial specifications
08/30185184 DC 08/30185184 DC. BS EN 4673-002. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 002. Design standard
08/30185179 DC 08/30185179 DC. BS EN 4673-001. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 001. Installation and removal procedure
PD ISO/TR 22694:2008 PD ISO/TR 22694:2008. Gas cylinders. Methods for establishing acceptance/ rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing
PD ISO/TR 22694:2008 PD ISO/TR 22694:2008. Gas cylinders. Methods for establishing acceptance/ rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing
08/30185130 DC 08/30185130 DC. BS EN 60061. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 42. Part 2. Lampholders. Amendment 39. Part 3. Gauges. Amendment 40. Part 4. Guidelines and general information. Amendment 12
08/30185108 DC 08/30185108 DC. BS EN 4604-008. Aerospace series. Cable, electrical, for signal transmission. Part 008. Cable, coaxial, 50 ohms, 200$OD, Type WD. Product standard
08/30185105 DC 08/30185105 DC. BS EN 50377-15-1. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 15-1. Type MPO with PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
08/30185056 DC 08/30185056 DC. BS EN 15861. Food processing machinery. Smoke facilities. Safety and hygiene requirements
PD ISO/IEC TR 18037:2008 PD ISO/IEC TR 18037:2008. Programming languages. C. Extensions to support embedded processors
ISO/IEC24767-1 : 2008 EDTN1 ISO/IEC24767-1 : 2008 EDTN1. ISO/IEC 24767-1 Information technology. Home network security . Security requirements
ISO/IEC10646 AMD5 (12/08) CD-ROM HEADER ISO/IEC10646 AMD5 (12/08) CD-ROM HEADER. ISO/IEC 10646 Information technology - Universal Multiple-Octet Coded Character Set (UCS)
08/30184950 DC 08/30184950 DC. BS EN 50291-1. Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1. Test methods and performance requirements
08/30184920 DC 08/30184920 DC. BS EN 60034-18-31. Rotating electrical machines. Part 18-31. Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines
08/30184911 DC 08/30184911 DC. BS EN 62365. Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks
08/30184786 DC 08/30184786 DC. BS ISO/IEC 26513. Software and systems engineering. Requirements for assessors and testers of user documentation
08/30184762 DC 08/30184762 DC. BS EN 61300-2-24. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-24. Tests. Screen testing of ceramic alignment split sleeve by stress application
08/30184758 DC 08/30184758 DC. BS EN 378-1 AMD1. Refrigerating systems and heat pumps. Safety and environmental requirements. Part 1. Basic requirements, definitions, classification and selection criteria
08/30184746 DC 08/30184746 DC. BS ISO 22199. Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
BS EN ISO 10472-6:2008 BS EN ISO 10472-6:2008. Safety requirements for industrial laundry machinery. Ironing and fusing presses
BS EN ISO 10472-5:2008 BS EN ISO 10472-5:2008. Safety requirements for industrial laundry machinery. Flatwork ironers, feeders and folders
08/30184727 DC 08/30184727 DC. BS ISO 6145-5. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 5. Capillary calibration devices
08/30184667 DC 08/30184667 DC. BS EN ISO 2062. Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
08/30184648 DC 08/30184648 DC. BS EN 15859. Air quality. Certification of automated dust arrestment plant monitors for use on stationary sources. Performance criteria and test procedures
08/30184645 DC 08/30184645 DC. BS EN 15860. Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
08/30184639 DC 08/30184639 DC. BS EN 13212. Road marking materials. Requirements for factory production control
08/30184636 DC 08/30184636 DC. BS EN 1790. Road marking materials. Preformed road markings
08/30184633 DC 08/30184633 DC. BS EN 1871. Road marking materials. Laboratory methods for identification
08/30184630 DC 08/30184630 DC. BS EN 12802. Road marking materials. Laboratory methods for identification
08/30184627 DC 08/30184627 DC. BS EN 13459. Road marking materials. Sampling from storage and testing
08/30184624 DC 08/30184624 DC. BS EN 13197. Road marking materials. Wear simulator. Turntable
08/30184621 DC 08/30184621 DC. BS EN 1423. Road marking materials. Drops on materials. Glass beads, antiskid aggregates and mixtures of the two
08/30184618 DC 08/30184618 DC. BS EN 1824. Road marking materials. Road trials
08/30184615 DC 08/30184615 DC. BS EN 1642. Dentistry. Medical devices for dentistry. Dental implants
08/30184612 DC 08/30184612 DC. BS EN 1641. Dentistry. Medical devices for dentistry. Materials
08/30184608 DC 08/30184608 DC. BS EN 1640. Dentistry. Medical devices for dentistry. Equipment
08/30184602 DC 08/30184602 DC. BS EN 1639. Dentistry. Medical devices for dentistry. Instruments
08/30184585 DC 08/30184585 DC. BS EN ISO 3924. Petroleum products. Determination of boiling range distribution. Gas chromatography method
08/30184583 DC 08/30184583 DC. BS IEC/TS 60034-18-32. Rotating electrical machines. Part 18-32. Functional evaluation of insulation systems. Test procedures for form-wound windings. Electrical evaluation of insulation systems used in rotating electrical machines
BS ISO 12745:2008 BS ISO 12745:2008. Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques
08/30184575 DC 08/30184575 DC. BS EN ISO 787-7. General methods of test for pigments and extenders. Part 7. Determination of residue on sieve. Water method. Manual procedure
08/30184566 DC 08/30184566 DC. BS ISO 21931-1. Sustainability in building construction. Framework for methods of assessment for environmental performance of construction works. Part 1. Buildings
08/30184562 DC 08/30184562 DC. BS EN 62271-103. High-voltage switchgear and controlgear. Part 103. Switches for rated voltages above 1 kV up to and including 52 kV
08/30184557 DC 08/30184557 DC. BS EN 62271-111. High-voltage switchgear and controlgear. Part 111. Pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
08/30184551 DC 08/30184551 DC. BS EN 50329 AMD1. Railway applications. Fixed installations. Traction transformers
08/30184548 DC 08/30184548 DC. BS EN 6049-002. Aerospace series. Electrical cables, installation. Protection sleeves in meta-aramid fibres. Part 002. General and list of product standard
08/30184545 DC 08/30184545 DC. BS EN 3155-077. Aerospace series. Electrical contacts used in elements of connection. Part 077. Contacts, electrical, female, type A, crimp, class R. Product standard
08/30184542 DC 08/30184542 DC. BS EN 3155-076. Aerospace series. Electrical contacts used in elements of connection. Part 076. Contacts, electrical, male, type A, crimp, class R. Product standard
08/30184522 DC 08/30184522 DC. BS ISO 2129. Geometrical Product Specifications (GPS). Indication of dimensions and tolerances. Mechanical engineering drawings
BS ISO 3858:2008 BS ISO 3858:2008. Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract
08/30184486 DC 08/30184486 DC. BS EN ISO 1135-4. Transfusion equipment for medical use. Part 4. Transfusion sets for single use
08/30184419 DC 08/30184419 DC. BS EN 60851-1 AMD2. Winding wires. Test methods. Part 1. General
08/30184415 DC 08/30184415 DC. BS EN 60851-5 AMD1. Winding wires. Test methods. Part 5. Electrical properties
08/30184405 DC 08/30184405 DC. BS EN 62532. Fluorescent induction lamps. Safety requirements
08/30184395 DC 08/30184395 DC. BS ISO 8894-1. Refractory materials. Determination of thermal conductivity. Part 1. Hot-wire (cross-array) and resistance thermometer methods
08/30184361 DC 08/30184361 DC. BS ISO 9270-2. 7/24 tapers for spindle noses for automatic tool changers. Part 2. Dimensions and designation of spindle noses of forms J and JF
08/30184358 DC 08/30184358 DC. BS ISO 9270-1. 7/24 taper spindle noses for automatic tool changers. Part 1. Dimensions and designation of spindle noses of forms S and SF
08/30184355 DC 08/30184355 DC. BS ISO/IEC 23002-4. Information technology. MPEG video technologies. Part 4. Video tool library
08/30184354 DC 08/30184354 DC. BS ISO/IEC 23001-4. Information technology. MPEG systems technologies. Part 4. Codec configuration representation
PD 156865:2008 PD 156865:2008. Standardized method of life cycle costing for construction procurement. A supplement to BS ISO 15686-5. Buildings and constructed assets. Service life planning. Life cycle costing
08/30184343 DC 08/30184343 DC. BS ISO/IEC 19763-3. Information technology. Metamodel framework for interoperability (MFI). Part 3. Metamodel for ontology registration
08/30184338 DC 08/30184338 DC. BS ISO/IEC 23000-11. Information technology. Multimedia application format (MPEG-A). Part 11. Stereoscopic video application format
08/30184312 DC 08/30184312 DC. BS EN 12952-6. Water-tube boilers and auxiliary installations. Part 6. Inspection during construction; documentation and marking of pressure parts of the boiler
08/30184309 DC 08/30184309 DC. BS EN 12952-5. Water-tube boilers and auxiliary installations. Part 5. Workmanship and construction of pressure parts of the boiler
08/30184303 DC 08/30184303 DC. BS EN 12952-3. Water-tube boilers and auxiliary installations. Part 3. Design and calculation for pressure parts
08/30184300 DC 08/30184300 DC. BS EN 12952-2. Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
08/30184296 DC 08/30184296 DC. BS EN 12561-8. Railway applications. Tank wagons. Part 8. Heating connections
08/30184292 DC 08/30184292 DC. BS EN 12561-7. Railway applications. Tank wagons. Part 7. Platforms and ladders
08/30184289 DC 08/30184289 DC. BS EN 12561-6. Railway applications. Tank wagons. Part 6. Manholes
08/30184286 DC 08/30184286 DC. BS EN 12561-5. Railway applications. Tank wagons. Part 5. Top devices for bottom emptying and top filling of liquid products
08/30184283 DC 08/30184283 DC. BS EN 12561-4. Railway applications. Tank wagons. Part 4. Top devices for top emptying and filling of liquid products
08/30184280 DC 08/30184280 DC. BS EN 12561-3. Railway applications. Tank wagons. Part 3. Bottom filling and emptying devices for gases liquefied under pressure


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment