2009/09/07

Cheapest & Latest BSI Standard (PDF) (32)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 13477-1:2001 BS EN 13477-1:2001. Non-destructive testing. Acoustic emission. Equipment characterization. Equipment description
BS EN 13477-2:2001 BS EN 13477-2:2001. Non-destructive testing. Acoustic emission. Equipment characterization. Verification of operating characteristic
BS EN ISO 13297:2001 BS EN ISO 13297:2001. Small craft. Electrical systems. Alternating current installations
BS ISO 13583-1:2000 BS ISO 13583-1:2000. Centrifugally cast steel and alloy products. General testing and tolerances
BS EN 2130:2001 BS EN 2130:2001. Aerospace Series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification
BS AU 50-1.1.2:2001, ISO 17269:2000 BS AU 50-1.1.2:2001, ISO 17269:2000. Tyres and wheels. Tyres. Car tyres. Methods for measuring rolling circumference. Loaded new tyres
BS EN 3272:2001 BS EN 3272:2001. Aerospace series. Pipe coupling 8°30'. Dynamic beam seal end for ferrule, welded. Geometric configuration
BS EN 3273:2001 BS EN 3273:2001. Aerospace series. Pipe coupling 8°30'. Dynamic beam seal end for elbows, tees and crosses. Geometric configuration
BS EN ISO 8099:2001 BS EN ISO 8099:2001. Small craft. Toilet waste retention systems
BS EN 3274:2001 BS EN 3274:2001. Aerospace series. Pipe coupling 8°30'. Thread. Geometric configurations
BS EN ISO 13929:2001 BS EN ISO 13929:2001. Small craft. Steering gear. Geared link systems
BS EN 3275:2002 BS EN 3275:2002. Aerospace series. Pipe coupling 8°30' up to 28000 kPa. Dynamic beam seal. Metric series. Technical specification
BS EN 3691:2001 BS EN 3691:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead, long welded
BS EN 3689:2001 BS EN 3689:2001. Aerospace series. T-ring fillers in titanium alloy for welding pipes. 28000 kPa nominal pressure
BS EN 3688:2001 BS EN 3688:2001. Aerospace series. T-ring fillers in titanium alloy for welded pipes. 14000 kPa nominal pressure
BS EN 3663:2001 BS EN 3663:2001. Aerospace Series. Pipe coupling. O-rings in rubber NBR, 75 IRHD, temperature range: -55°C to + 135°C
BS EN 3082:2001 BS EN 3082:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead welded, for repair
BS EN 3696:2001 BS EN 3696:2001. Aerospace series. Washers in heat resisting steel
BS ISO 6025:2000 BS ISO 6025:2000. Cinematography. Analogue photographic sound test films, 35 mm and 16mm. Specifications
ISO/IEC21407 : 2001 EDTN 1 ISO/IEC21407 : 2001 EDTN 1. ISO/IEC21407 : 2001 Information technology - Telecommunications and information exchange between systems- Private Integrated Services Network (PISN) - Specification, functional model and information flows - Simple Dialog Supplementary Service (SS-SD)
WD/ISO/IEC21408 : 2001 EDTN 1 WD/ISO/IEC21408 : 2001 EDTN 1. ISO/IEC 21408 : 2001 Information technology -Telecommunications and information exchange between systems- Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Simple Dialog Supplementary Service (SS-SD)
ISO/IEC21409 : 2001 EDTN 1 ISO/IEC21409 : 2001 EDTN 1. ISO/IEC21409 : 2001 Information technology - Telecommunications and information exchange between systems- Corporate telecommunication networks - Signalling interworking between QSIG and H.323 - Generic Functional Protocol for the support of Supplementary Services
BS ISO 12307-2:2000 BS ISO 12307-2:2000. Plain bearings. Checking of wrapped bushes. Checking the inside diameter
BS EN ISO 10139-2:2001 BS EN ISO 10139-2:2001. Dentistry. Soft lining materials for removable dentures. Materials for long-term use
BS ISO 12965:2000 BS ISO 12965:2000. Butadiene rubber. Determination of microstructure by infra-red spectrometry
BS EN 61174:2001, IEC 61174:2001 BS EN 61174:2001, IEC 61174:2001. Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
BS 5766-21:2001, BS ISO 7485:2000 BS 5766-21:2001, BS ISO 7485:2000. Methods for analysis of animal feeding stuffs. Determination of potassium and sodium contents. Methods using flame-emission spectrometry
BS 5766-23:2001, BS EN ISO 6865:2001 BS 5766-23:2001, BS EN ISO 6865:2001. Methods for analysis of animal feeding stuffs. Determination of crude fibre content. Method with intermediate filtration
BS 5381-5:2002, ISO 6565:2002 BS 5381-5:2002, ISO 6565:2002. Methods for determination of physical properties of tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods
BS ISO 4407:2002 BS ISO 4407:2002. Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the counting method using an optical microscope
BS EN 3566:2001 BS EN 3566:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Adaptor with lockring
BS EN 3561:2001 BS EN 3561:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrules with dynamic beam seal end, welded and reduced at pipe end
BS EN 3084:2001 BS EN 3084:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, welded end threaded for repair
BS EN 3081:2001 BS EN 3081:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrules welded, with dynamic beam seal end, for repair
BS EN 2656:2001 BS EN 2656:2001. Aerospace series. Pipe coupling. Coupling end, welded. Geometric configuration
BS EN 3730:2001 BS EN 3730:2001. Aerospace series. Clamps, saddle. Fixed and sliding version in aluminium alloy with rubber cushioning. Dimensions. Masses
BS EN 3690:2001 BS EN 3690:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead, long
KIT 46 KIT 46. Quality management systems (BS EN ISO 9000:2000 Series)
KIT 47 KIT 47. BSI Electronic Book. Quality Management 2000 Version 1 (BS EN ISO 9000:2000 Series CD-ROM Kit)
KIT 48 KIT 48. BSI Electronic Book. Quality Management 2000 Version 2 (BS EN ISO 9000:2000 Series CD-ROM Toolkit)
KIT 30 KIT 30. Testing fresh concrete set
KIT 29 KIT 29. Fire safety engineering set
DD ISO/TS 16668:2000 DD ISO/TS 16668:2000. Basic semantics register (BSR)
BS EN ISO 10545-16:2000 BS EN ISO 10545-16:2000. Ceramic tiles. Determination of small colour differences
ISO 9001:2000 Insight Guidance CD ISO 9001:2000 Insight Guidance CD. ISO 9001:2000 Insight Guidance CD
HB 10179:2000 HB 10179:2000. Mitchell's Structure & Fabric - Part 2
BS EN 3269:2001 BS EN 3269:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrules, blind, with dynamic beam seal end
BS EN 3270:2001 BS EN 3270:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Blanking plug with lockring
BS ISO 5781:2000 BS ISO 5781:2000. Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
HB 10177:2000 HB 10177:2000. Mitchell's Structure & Fabric - Part 1
BS EN 3243:2001 BS EN 3243:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Ferrule, welded, with dynamic beam seal end
BS EN 4115:2001 BS EN 4115:2001. Aerospace series. Cushion, rubber for clamps. Dimensions, masses
BS EN 3264:2001 BS EN 3264:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Thrust wire nut
BS EN 13016-1:2000, BS 2000-394:2001 BS EN 13016-1:2000, BS 2000-394:2001. Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP)
BS EN 12975-1:2000 BS EN 12975-1:2000. Thermal solar systems and components. Solar collectors. General requirements
BS EN 13016-2:2000, BS 2000-409:2001 BS EN 13016-2:2000, BS 2000-409:2001. Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40 °C and 100 °C
ISO14020 : 2000 EDTN 2 ISO14020 : 2000 EDTN 2. ISO 14020:2000 Environmental labels and declarations - General principles
BS EN ISO 105-Z06:2000 BS EN ISO 105-Z06:2000. Textiles. Tests for colour fastness. Evaluation of dye and pigment migration
BS EN ISO 105-C07:2001 BS EN ISO 105-C07:2001. Textiles. Tests for colour fastness. Colour fastness to wet scrubbing of pigment dyed or pigment printed textiles
BS ISO/IEC 14478-2:1998 Version 2 BS ISO/IEC 14478-2:1998 Version 2. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Foundation component
BS EN 12467:2000 BS EN 12467:2000. Fibre-cement flat sheets. Product specifications and test methods
BS EN 13429:2000 BS EN 13429:2000. Packaging. Reuse
WD/BS1113 : 1999 WD/BS1113 : 1999. Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
wd/BS8800 HEALTH SAFETY ELECTRONIC BOOK wd/BS8800 HEALTH SAFETY ELECTRONIC BOOK.
BS EN 50364:2002 BS EN 50364:2002. Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications
ISO/IEC21410 : 2001 EDTN 1 ISO/IEC21410 : 2001 EDTN 1. ISO/IEC21410 : 2001 Information technology -- Telecommunications and information exchange between systems- Corporate telecommunication networks -- Signalling interworking between QSIG and H.323 -- Call Transfer Supplementary Services
ISO/IEC21411 : 2001 EDTN 1 ISO/IEC21411 : 2001 EDTN 1. ISO/IEC21411 : 2001 Information technology- Telecommunications and informnation exchange between systems- Corporate telecommunication networks- Signalling interworking between QSIG and H.323- Call Diversion Supplementary Services
BS EN 10244-3:2001 BS EN 10244-3:2001. Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminium coatings
BS ISO 4268:2000, ISO 4268:2000 BS ISO 4268:2000, ISO 4268:2000. Petroleum and liquid petroleum products. Temperature measurements. Manual methods
BS EN 10244-4:2001 BS EN 10244-4:2001. Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
BS EN 10244-5:2001 BS EN 10244-5:2001. Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
BS EN 10244-6:2001 BS EN 10244-6:2001. Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
BS EN ISO 3098-6:2000 BS EN ISO 3098-6:2000. Technical product documentation. Lettering. Cyrillic alphabet
BS EN ISO 13706:2000 BS EN ISO 13706:2000. Petroleum and natural gas industries. Air cooled heat exchangers
BS EN 10245-1:2001 BS EN 10245-1:2001. Steel wire and wire products. Organic coatings on steel wire. General rules
BS EN 10245-2:2001 BS EN 10245-2:2001. Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
BS EN 10245-3:2001 BS EN 10245-3:2001. Steel wire and wire products. Organic coatings on steel wire. PE coated wire
BS EN 60601-2-34:2001, IEC 60601-2-34:2000 BS EN 60601-2-34:2001, IEC 60601-2-34:2000. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment
BS EN 13199-2:2000 BS EN 13199-2:2000. Packaging. Small load carrier systems. Column Stackable System (CSS)
BS EN ISO 3098-2:2000 BS EN ISO 3098-2:2000. Technical product documentation. Lettering. Latin alphabet, numerals and marks
BS EN ISO 3098-3:2000 BS EN ISO 3098-3:2000. Technical product documentation. Lettering. Greek alphabet
BS EN 60601-2-50:2002, IEC 60601-2-50:2000 BS EN 60601-2-50:2002, IEC 60601-2-50:2000. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of infant phototherapy equipment
BS EN 933-10:2001 BS EN 933-10:2001. Tests for geometrical properties of aggregates. Assessment of fines. Grading of fillers (air-jet sieving)
BS EN 920:2001 BS EN 920:2001. Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract
BS EN 646:2001 BS EN 646:2001. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN 12763:2000 BS EN 12763:2000. Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery
BS EN 12491:2001 BS EN 12491:2001. Paragliding equipment. Emergency parachutes. Safety requirements and test methods
BS ISO 9924-2:2000 BS ISO 9924-2:2000. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrile-butadiene and halobutyl rubbers
DD ENV 1729-2:2001 DD ENV 1729-2:2001. Furniture. Chairs and tables for educational institutions. Safety requirements and test methods
BS EN ISO 11064-3:2000 BS EN ISO 11064-3:2000. Ergonomic design of control centres. Control room layout
BS AU 50-1.6.1c:2002, ISO 5751-1:2001 BS AU 50-1.6.1c:2002, ISO 5751-1:2001. Tyres and wheels. Tyres. Motorcycle tyres. Specification of general requirements and design guide for designations, dimensions and load ratings for metric series tyres. Section 6: Motorcycle tyres Subsection 6.1c: Specification for general requirements and design guide for designations, dimensions and load-carrying capacity for metric series tyres
BS 6004:2000 BS 6004:2000.
ISO/IEC17309 : 2000 EDTN 1 ISO/IEC17309 : 2000 EDTN 1. ISO/IEC 17309: Information technology -- Telecommunications and information exchange between systems -- Private Intergrated Services Networks -- Mapping functions for the employment of a circuit mode basic service and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections
ISO/IEC17310 : 2000 EDTN 1 ISO/IEC17310 : 2000 EDTN 1. ISO/IEC 17310: Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing
ISO/IEC17311 : 2000 EDTN 1 ISO/IEC17311 : 2000 EDTN 1. ISO/IEC 17311: Information technology -- Telecommunication and information exchange between systems -- Private Integrated Services Network -- Mapping functions for the employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-multiplexing
CWA 13987-1:2000 CWA 13987-1:2000. Smart card systems. Interoperable citizen services. User related information (based on DISTINCT). Definition of user related information
CWA 13987-2:2000 CWA 13987-2:2000. Smart card systems. Interoperable citizen services. User related information (based on DISTINCT). Implementation guidelines
CWA 13987-3:2000 CWA 13987-3:2000. Smart card systems. Interoperable citizen services. User related information (based on DISTINCT). Guidelines for creating, operating and maintaining an interoperable network
BS ISO/IEC 20060:2001 BS ISO/IEC 20060:2001. Information technology. Open terminal architecture (OTA) specification. Virtual machine specification
BS EN 61557-10:2001, IEC 61557-10:2000 BS EN 61557-10:2001, IEC 61557-10:2000. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Combined measuring equipment for testing, measuring or monitoring of protective measures
BS EN 10304:2001 BS EN 10304:2001. Magnetic materials (iron and steel) for use in relays
BS EN 10303:2001 BS EN 10303:2001. Thin magnetic steel sheet and strip for use at medium frequencies
BS EN 10270-2:2001 BS EN 10270-2:2001. Steel wire for mechanical springs. Oil hardened and tempered spring steel wire
BS EN 10270-3:2001 BS EN 10270-3:2001. Steel wire for mechanical springs. Stainless spring steel wire
BS EN 13869:2002 BS EN 13869:2002. Lighters. Child-resistance for lighters. Safety requirements and test methods
PD 970:2001 PD 970:2001. Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels
BS EN 12625-7:2000 BS EN 12625-7:2000. Tissue paper and tissue products. Determination of optical properties
BS ISO 10936-2:2001 BS ISO 10936-2:2001. Optics and optical instruments. Operation microscopes. Light hazard from operation microscopes used in ocular surgery
PD 6660:2000 PD 6660:2000. PNO-ISC information document number 008. Management of partial calling line identity
BS EN 259-1:2001 BS EN 259-1:2001. Wallcoverings in roll form. Heavy duty wallcoverings. Specifications
BS EN 259-2:2001 BS EN 259-2:2001. Wallcoverings in roll form. Heavy duty wallcoverings. Determination of impact resistance
BS EN 12781:2001 BS EN 12781:2001. Wallcoverings. Specification for cork panels
CWA 14040:2000 CWA 14040:2000. A standardization work programme for learning and training technologies & educational multimedia software
DD ENV 13370:2001 DD ENV 13370:2001. Characterization of waste. Analysis of eluates. Determination of Ammonium-N, AOX, conductivity, Hg, phenol index, TOC, CN- easily liberatable, F-
BS EN 13378:2001 BS EN 13378:2001. Pasta processing plants. Pasta presses. Safety and hygiene requirements
BS EN 13379:2001 BS EN 13379:2001. Pasta processing plants. Spreader, stripping and cutting machine, stick return conveyor, stick magazine. Safety and hygiene requirements
BS EN 1122:2001 BS EN 1122:2001. Plastics. Determination of cadmium. Wet decomposition method
BS EN 13289:2001 BS EN 13289:2001. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
BS EN 60130-9:2001, IEC 60130-9:2000 BS EN 60130-9:2001, IEC 60130-9:2000. Connectors for frequencies below 3 MHz. Circular connectors for radio and associated sound equipment
ISO/IEC17462 : 2000 EDTN.1 ISO/IEC17462 : 2000 EDTN.1 . ISO/IEC 17462 Information technology -- 3,81 mm wide magnetic tape cartridge for information interchange -- Helical Scan recording -- DSS-4 format
BS EN 3920:2001 BS EN 3920:2001. Aerospace series. Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3). Filler metal for brazing. Powder or paste
BS EN ISO 14644-2:2000 BS EN ISO 14644-2:2000. Cleanrooms and associated controlled environments. Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
BS EN 3921:2001 BS EN 3921:2001. Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Amorphous foil
BS EN 2809:2001 BS EN 2809:2001. Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated. Classification. 900 MPa (at ambient temperature)/650°C
BS EN 61000-4-1:2001, IEC 61000-4-1:2000 BS EN 61000-4-1:2001, IEC 61000-4-1:2000. Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
BS EN 3923:2001 BS EN 3923:2001. Aerospace series. Nickel base alloy NI - B41203 (NiCr7Si5B3Fe3). Filler metal for brazing. Powder or paste
BS EN 2810:2001 BS EN 2810:2001. Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated. Classification: 900 MPa (at ambient temperature)/650°C
BS EN 3925:2001 BS EN 3925:2001. Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Amorphous foil
BS EN 3014:2001 BS EN 3014:2001. Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650°C
BS EN ISO 7823-1:2000 BS EN ISO 7823-1:2000. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Cast sheets
BS EN 3015:2001 BS EN 3015:2001. Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 3926:2001 BS EN 3926:2001. Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Borided foil
BS EN 3932:2001 BS EN 3932:2001. Aerospace series. Nickel base alloy NI-B13001 (NiP11). Filler metal for brazing. Amorphous foil
BS EN 3934:2001 BS EN 3934:2001. Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Amorphous foil
BS EN 3935:2001 BS EN 3935:2001. Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Borided foil
BS EN 3938:2001 BS EN 3938:2001. Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3) Filler metal for brazing. Amorphous foil
BS EN 3138:2001 BS EN 3138:2001. Aerospace series. Rivets, solid 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
BS EN 3139:2001 BS EN 3139:2001. Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
BS EN 3140:2001 BS EN 3140:2001. Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
BS EN 3230:2001 BS EN 3230:2001. Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated. Classificaiton: 900 MPa (at ambient temperature)/235°C
BS EN 4182:2001 BS EN 4182:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced
BS EN 4183:2001 BS EN 4183:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° welded ends
BS EN 3939:2001 BS EN 3939:2001. Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Powder or paste
BS EN 4187:2001 BS EN 4187:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, bulkhead, long
BS EN 4185:2001 BS EN 4185:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, bulkhead on run long
BS EN 4186:2001 BS EN 4186:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, cross
BS EN 4184:2001 BS EN 4184:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45° double, welded ends
BS EN 4188:2001 BS EN 4188:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° bulkhead, long, welded end
BS EN 4189:2001 BS EN 4189:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, bulkhead branch long
BS EN 4190:2001 BS EN 4190:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced with thrust wire nut on run
BS EN 3941:2001 BS EN 3941:2001. Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Amorphous foil
BS EN 3942:2001 BS EN 3942:2001. Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Borided foil
BS EN 3943:2001 BS EN 3943:2001. Aerospace series. Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3). Filler metal for brazing. Powder or paste
BS EN 3945:2001 BS EN 3945:2001. Aerospace series. Nickel base alloy NI-B48801 (NiMn19Si6Cu4B). Filler metal for brazing. Powder or paste
BS EN 3946:2001 BS EN 3946:2001. Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Powder or paste
BS EN 4085:2001 BS EN 4085:2001. Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Amorphous foil
BS EN 61690-1/2:2000, IEC 61690-1:2000,IEC 61690-2:2000 BS EN 61690-1/2:2000, IEC 61690-1:2000,IEC 61690-2:2000. Electronic design interchange format (EDIF). Part 1: Version 3 0 0; Part 2: Version 4 0 0 (CD-ROM)
BS EN 4103:2001 BS EN 4103:2001. Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Borided foil
BS EN 862:2001 BS EN 862:2001. Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
WD/ITSMF - BS15000 : 2000 WD/ITSMF - BS15000 : 2000.
BS EN 174:2001 BS EN 174:2001. Personal eye-protection. Ski goggles for downhill skiing
BS EN 171:2002 BS EN 171:2002. Personal eye-protection. Infrared filters. Transmittance requirements and recommended use
BS EN 166:2002 BS EN 166:2002. Personal eye protection. Specifications
BS EN 167:2002 BS EN 167:2002. Personal eye protection. Optical test methods
BS EN 168:2002 BS EN 168:2002. Personal eye-protection. Non-optical test methods
BS 5499-4:2000 BS 5499-4:2000. Safety signs, including fire safety signs. Code of practice for escape route signing
PD CR 13909:2002 PD CR 13909:2002. Identification card systems. Intersector thin flexible cards. Acceptance criteria
BS EN 62027:2001 BS EN 62027:2001. Preparation of parts lists
BS 8204-6:2001 BS 8204-6:2001. Screeds, bases and in-situ floorings. Synthetic resin floorings. Code of practice
BS EN 12373-11:2001 BS EN 12373-11:2001. Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60°, and 85°
BS EN 12373-12:2001 BS EN 12373-12:2001. Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
BS EN 12373-13:2001 BS EN 12373-13:2001. Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS EN 12373-14:2001 BS EN 12373-14:2001. Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
BS EN 12373-15:2001 BS EN 12373-15:2001. Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN 867-4:2001 BS EN 867-4:2001. Non-biological systems for use in sterilizers. Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration
DD ENV 13154-1:2001 DD ENV 13154-1:2001. Data communication for HVAC application field net. Objects
BS EN ISO 2233:2001 BS EN ISO 2233:2001. Packaging. Complete, filled transport packages and unit loads. Conditioning for testing
BS ISO 11698-1:2000 BS ISO 11698-1:2000. Micrographics. Methods of measuring image quality produced by aperture card scanners. Characteristics of the test images
BS ISO 11698-2:2000 BS ISO 11698-2:2000. Micrographics. Methods of measuring image quality produced by aperture card scanners. Quality criteria and control
BS EN ISO 5828:2001 BS EN ISO 5828:2001. Resistance welding equipment. Secondary connecting cables with terminals connected to water-cooled lugs. Dimensions and characteristics
ISO/IEC21888 : 2001 EDTN 1 ISO/IEC21888 : 2001 EDTN 1. ISO/IEC21888 : 2001 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network Specification, functional model and information flows- Call identification and call linkage additional network feature
ISO/IEC21889 : 2001 EDTN 1 ISO/IEC21889 : 2001 EDTN 1. ISO/IEC21889 : 2001 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network (PISN) -- Inter-exchange signalling protocol -- Call identification and call linkage additional network feature
ISO/IECTR21890 : 2001 EDTN 1 ISO/IECTR21890 : 2001 EDTN 1. ISO/IECTR21890 : 2001 Information technology- Telecommunications and information exchange between systems- Interoperation of PISNs with IP networks
BS EN 61346-2:2001, IEC 61346-2:2000 BS EN 61346-2:2001, IEC 61346-2:2000. Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations. Classification of objects and codes for classes
BS ISO/IEC 16262:2002 BS ISO/IEC 16262:2002. Information technology. ECMAScript language specification
BS EN 4191:2001 BS EN 4191:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced, bulkhead branch, long
BS EN 4192:2001 BS EN 4192:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced bulkhead branch
BS EN 4193:2001 BS EN 4193:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced bulkhead on run long
BS EN 4194:2001 BS EN 4194:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced, bulkhead
BS 6043-2-18:2001, ISO 5931:2000 BS 6043-2-18:2001, ISO 5931:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method
BS EN 3927:2001 BS EN 3927:2001. Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Powder or paste
WD/ISO/IEC13870 : 2001 EDTN 2 WD/ISO/IEC13870 : 2001 EDTN 2. ISO/IEC13870 : 2001 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Call completion supplementary services
BS EN 3930:2001 BS EN 3930:2001. Aerospace series. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Powder or paste
WD/ISO/IEC19460 : 2001 EDTN 1 WD/ISO/IEC19460 : 2001 EDTN 1. ISO/IEC19460 : 2001 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Single Step Call Transfer Supplementary Service
ISO/IEC19459 : 2001 EDTN 1 ISO/IEC19459 : 2001 EDTN 1. ISO/IEC19459 : 2001 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Single Step Call Transfer Supplementary Service
BS EN ISO 13846:2001, BS 2782-11:Method 1111F:2000 BS EN ISO 13846:2001, BS 2782-11:Method 1111F:2000. Plastics piping systems. End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping. Test method for long-term leaktightness under internal water pressure
BS EN 3933:2001 BS EN 3933:2001. Aerospace series. Nickel base alloy NI-B13001 (NiP11). Filler metal for brazing. Powder or paste
BS EN 3936:2001 BS EN 3936:2001. Aerospace series. Nickel base alloy NI-B21001 (NiCr15B4). Filler metal for brazing. Powder or paste
BS IEC 62118:2000 BS IEC 62118:2000. Nuclear reactor instrumentation. Pressurized water reactor (PWR) of VVER design. Monitoring adequate cooling within the core during cold shutdown
BS IEC 60880:1986 BS IEC 60880:1986. Software for computers in the safety systems of nuclear power stations
BS EN 13460:2002 BS EN 13460:2002. Maintenance. Documents for maintenance
BS EN 13306:2001 BS EN 13306:2001. Maintenance terminology
BS ISO 15100:2000 BS ISO 15100:2000. Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
BS ISO 2559:2000 BS ISO 2559:2000. Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications
BS EN 12162:2001 BS EN 12162:2001. Liquid pumps. Safety requirements. Procedure for hydrostatic testing
PD 6645:2000 PD 6645:2000. PNO-ISC specification number 006. Interconnect user part (IUP)
BS EN 4113:2001 BS EN 4113:2001. Aerospace series. Clamps, loop (P type) in corrosion resisting steel with rubber cushioning. Dimensions and masses
BS EN 4114:2001 BS EN 4114:2001. Aerospace series. Clamps, loop ("P" type) in aluminium alloy with rubber cushioning. Dimensions and masses
BS EN 3248:2001 BS EN 3248:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Adaptors, reduced pipe end, with lockring
BS EN 3247:2001 BS EN 3247:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead welded end
BS EN 3246:2001 BS EN 3246:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead
BS EN 3245:2001 BS EN 3245:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, reducer
BS EN 3266:2001 BS EN 3266:2001. Aerospace series. Pipe coupling in titanium alloy. Bulkhead nut
BS EN 3267:2001 BS EN 3267:2001. Aerospace series. Washers, bulkhead in titanium alloy
BS EN 3268:2001 BS EN 3268:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Pressure plug
BS EN 12629-1:2001 BS EN 12629-1:2001. Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements
BS EN 12601:2001 BS EN 12601:2001. Reciprocating internal combustion engine driven generating sets. Safety
BS ISO/TR 19121:2000 BS ISO/TR 19121:2000. Geographic information. Imagery and gridded data
BS EN 12976-1:2001 BS EN 12976-1:2001. Thermal solar systems and components. Factory made systems. General requirements
BS EN 12976-2:2001 BS EN 12976-2:2001. Thermal solar systems and components. Factory made systems. Test methods
BS EN 1337-7:2001 BS EN 1337-7:2001. Structural bearings. Spherical and cylindrical PTFE bearings
BS EN 1337-2:2001 BS EN 1337-2:2001. Structural bearings. Sliding elements
RA Software Tool RA Software Tool. RA Software Tool
KIT 61 KIT 61. Information security management (RA software) condensed Toolkit
BS EN 12835:2001 BS EN 12835:2001. Airtight shutters. Air permeability test
BS ISO 13562-1:2000 BS ISO 13562-1:2000. Industrial variable-reach trucks. Stability tests
BS ISO 13562-2:2001 BS ISO 13562-2:2001. Industrial variable-reach trucks. Additional stability tests for trucks handling freight containers of length 6m and above
BS ISO 15794:2001 BS ISO 15794:2001. Bi-directional and multi-directional fork-lift trucks. Stability tests
BS EN 13463-1:2001 BS EN 13463-1:2001. Non-electrical equipment for potentially explosive atmospheres. Basic method and requirements
BS EN 1760-2:2001 BS EN 1760-2:2001. Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
KIT 31 KIT 31. Office furniture seating pack
PD 6639:2001 PD 6639:2001. PNO-ISC specification number 005 C7. Interconnect message transfer part (MTP)
PD 6627:2001 PD 6627:2001. PNO-ISC Information document number 007. UK Interconnect user of SCCP and MTP
BS EN 13098:2001 BS EN 13098:2001. Workplace atmospheres. Guidelines for measurement of airborne micro-organisms and endotoxin
BS ISO 14606:2000 BS ISO 14606:2000. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS EN 12440:2001 BS EN 12440:2001. Natural stone. Denomination criteria
BS EN 61643-321:2002 BS EN 61643-321:2002. Low voltage surge protective devices. Specifications for avalanche breakdown diode (ABD)
BS EN 3937:2001 BS EN 3937:2001. Aerospace series. Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3). Filler metal for brazing. Powder or paste
BS EN 3952:2001 BS EN 3952:2001. Aerospace series. Silver base alloy AG-B10001 (AgCu28). Filler metal for brazing. Wire
BS EN 3953:2001 BS EN 3953:2001. Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Wire
BS EN 3954:2001 BS EN 3954:2001. Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Powder or paste
BS EN 3955:2001 BS EN 3955:2001. Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Rolled foil
BS EN ISO 12569:2001 BS EN ISO 12569:2001. Thermal insulation in buildings. Determination of air change in buildings. Tracer gas dilution method
BS EN 3956:2001 BS EN 3956:2001. Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Wire
BS EN 3957:2001 BS EN 3957:2001. Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Powder or paste
BS EN 12807:2001 BS EN 12807:2001. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction
BS EN ISO 14161:2001 BS EN ISO 14161:2001. Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
PD ES 59008-6-2:2001 PD ES 59008-6-2:2001. Data requirements for semiconductor die. Exchange data formats and data dictionary. Data dictionary
BS EN 61643-21:2001 BS EN 61643-21:2001. Low voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Performance requirements and testing methods
BS EN 12852:2001 BS EN 12852:2001. Food processing machinery. Food processors and blenders. Safety and hygiene requirements
BS EN 12853:2001 BS EN 12853:2001. Food processing machinery. Hand-held blenders and whisks. Safety and hygiene requirements
BS EN 3958:2001 BS EN 3958:2001. Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Rolled foil
BS EN 3959:2001 BS EN 3959:2001. Aerospace series. Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4). Filler metal for brazing. Powder or paste
BS 7983:2001 BS 7983:2001. Requirements for payphones for networks other than the ISDN
BS EN 12622:2001 BS EN 12622:2001. Safety of machine tools. Hydraulic press brakes
BS EN ISO 182-4:2001 BS EN ISO 182-4:2001. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Potentiometric method
BS EN ISO 182-3:2001 BS EN ISO 182-3:2001. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Conductometric method
DD ENV 14032:2002 DD ENV 14032:2002. Health informatics. System of concepts to support nursing
BS EN 13318:2000 BS EN 13318:2000. Screed material and floor screeds. Definitions
BS EN 12716:2001 BS EN 12716:2001. Execution of special geotechnical works. Jet grouting
BS ISO 10791-9:2001 BS ISO 10791-9:2001. Test conditions for machining centres. Evaluation of the operating times of tool change and pallet change
BS EN 13197:2001 BS EN 13197:2001. Road marking materials. Wear simulators
BS EN 13212:2001 BS EN 13212:2001. Road marking materials. Requirements for factory production control
BS EN 1444:2001 BS EN 1444:2001. Fibre-cement pipelines. Guide for laying and on-site work practices
KIT 40 KIT 40. Complete service life planning pack
BS EN 12205:2001 BS EN 12205:2001. Transportable gas cylinders. Non-refillable metallic gas cylinders
BS EN 1803:2002 BS EN 1803:2002. Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders
BS EN 1802:2002 BS EN 1802:2002. Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders
BS EN 12245:2002 BS EN 12245:2002. Transportable gas cylinders. Fully wrapped composite cylinders
BS EN 12257:2002 BS EN 12257:2002. Transportable gas cylinders. Seamless, hoop-wrapped composite cylinders
BS EN 1964-2:2001 BS EN 1964-2:2001. Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless steel with an Rm value of 1 100 MPa and above
CWA 13988:2000 CWA 13988:2000. Guidance information for the use of Dublin Core in Europe
CWA 13989:2000 CWA 13989:2000. Description of structure and maintenance of the web based observatory of European work on metadata
CWA 14050-1:2000 CWA 14050-1:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Application programming interface (API). Service provider interface (SPI). Programmer's reference
CWA 14050-2:2000 CWA 14050-2:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Service classes definition
CWA 14050-3:2000 CWA 14050-3:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Printer device class interface
CWA 14050-4:2000 CWA 14050-4:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Identification card unit device class interface
CWA 14050-5:2000 CWA 14050-5:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Cash dispenser device class interface
CWA 14050-6:2000 CWA 14050-6:2000. Extensions for financial services (XFS) interface specification. Release 3.0. PIN keypad device class interface
CWA 14050-7:2000 CWA 14050-7:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Check reader/scanner device
CWA 14050-8:2000 CWA 14050-8:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Depository device class interface
CWA 14050-9:2000 CWA 14050-9:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Text terminal unit device class interface
CWA 14050-10:2000 CWA 14050-10:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Sensors and indicators unit device class interface
CWA 14050-11:2000 CWA 14050-11:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Vendor dependent mode class interface
CWA 14050-12:2000 CWA 14050-12:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Camera device class interface
CWA 14050-13:2000 CWA 14050-13:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Alarm device class interface
CWA 14050-14:2000 CWA 14050-14:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Card embossing unit class interface
CWA 14050-15:2000 CWA 14050-15:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Cash in module device class interface
CWA 14050-16:2000 CWA 14050-16:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Application programming interface (API). Service provider interface (SPI). Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-17:2000 CWA 14050-17:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Printer device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-18:2000 CWA 14050-18:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Identification card device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-19:2000 CWA 14050-19:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Cash dispenser device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-20:2000 CWA 14050-20:2000. Extensions for financial services (XFS) interface specification. Release 3.0. PIN keypad device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-21:2000 CWA 14050-21:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Depository device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-22:2000 CWA 14050-22:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Text terminal unit device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-23:2000 CWA 14050-23:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Sensors and indicators unit device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-24:2000 CWA 14050-24:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Camera device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference
CWA 14050-25:2000 CWA 14050-25:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Identification card device class interface. PC/SC integration guidelines
BS ISO 230-3:2001 BS ISO 230-3:2001. Test code for machine tools. Determination of thermal effects
BS IEC 61892-5:2000 BS IEC 61892-5:2000. Mobile and fixed offshore units. Electrical installations. Mobile units
BS ISO 10791-2:2001 BS ISO 10791-2:2001. Test conditions for machining centres. Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
PD 6654:2001 PD 6654:2001. PNO-ISC/SER/004 Call forwarding on subscriber not reachable. Supplementary service
BS ISO/IEC 9075-10:2000 BS ISO/IEC 9075-10:2000. Information technology. Database languages. SQL. Object Language Bindings (SQL/OLB)
BS EN 60695-8-1:2001, IEC 60695-8-1:2001 BS EN 60695-8-1:2001, IEC 60695-8-1:2001. Fire hazard testing. Heat release. General guidance
BS EN 2032-1:2002 BS EN 2032-1:2002. Metallic materials. Conventional designation
BS EN 2743:2002 BS EN 2743:2002. Aerospace series. Fibre reinforced plastics. Standard procedures for conditioning prior to testing unaged materials
BS EN 2437:2002 BS EN 2437:2002. Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys
BS EN 2044:2001 BS EN 2044:2001. Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm ≤ D ≤ 63 mm. Dimensions
BS EN ISO 15584:2001 BS EN ISO 15584:2001. Small craft. Inboard petrol engines. Engine-mounted fuel and electrical components
BS EN 2045:2001 BS EN 2045:2001. Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm ≤ a ≤ 50 mm. Dimensions
BS EN 2046:2001 BS EN 2046:2001. Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm ≤ a ≤ 50 mm. Dimensions
BS EN ISO 14122-1:2001 BS EN ISO 14122-1:2001. Safety of machinery. Permanent means of access to machinery. Choice of a fixed means of access between two levels
BS EN ISO 14122-2:2001 BS EN ISO 14122-2:2001. Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
BS EN ISO 14122-3:2001 BS EN ISO 14122-3:2001. Safety of machinery. Permanent means of access to machinery. Stairways, stepladders and guard-rails
BS EN ISO 14565:2001, BS 5766-26:2001 BS EN ISO 14565:2001, BS 5766-26:2001. Animal feeding stuffs. Determination of vitamin A content. Method using high-performance liquid chromatography
BS EN ISO 6869:2001, BS 5766-25:2001 BS EN ISO 6869:2001, BS 5766-25:2001. Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc. Method using atomic absorption spectrometry
BS 8297:2000 BS 8297:2000. Code of practice for Design and installation of non-loadbearing precast concrete cladding
BS EN 80416-1:2002, IEC 80416-1:2001 BS EN 80416-1:2002, IEC 80416-1:2001. Basic principles for graphical symbols for use on equipment. Creation of symbol originals
BS EN ISO 2411:2000 BS EN ISO 2411:2000. Rubber or plastics-coated fabrics. Determination of coating adhesion
BS EN 12717:2001 BS EN 12717:2001. Safety of machine tools. Drilling machines
BS EN 2047:2001 BS EN 2047:2001. Aerospace series. Beaded L-section extruded, in aluminium and aluminium alloys. Dimensions
BS EN 2048:2001 BS EN 2048:2001. Aerospace series. Extruded L-section in aluminium alloys. Dimensions
BS EN ISO 13534:2001 BS EN ISO 13534:2001. Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and re-manufacture of hoisting equipment
BS ISO/IEC 10373-3:2001 BS ISO/IEC 10373-3:2001. Identification cards. Test methods. Integrated circuit(s) cards with contacts and related interface devices
BS EN 2049:2001 BS EN 2049:2001. Aerospace series. Extruded channel section, in aluminium alloys. Dimensions
BS ISO 15544:2000 BS ISO 15544:2000. Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response. Requirements and guidelines for emergency response
NC/BSEN50341-2 : 2001 NC/BSEN50341-2 : 2001. Overhead electrical lines exceeding AC 45 kV . Part 2: Index of National Normative Aspects
BS EN 50341-1:2001 BS EN 50341-1:2001. Overhead lines exceeding AC 45 kV . General requirements. Common specifications
NC/BSEN50341-3 : 2001 NC/BSEN50341-3 : 2001. Overhead electrical lines exceeding AC 45 kV . Part 3: Set of National Normative Aspects
BS EN 2050:2001 BS EN 2050:2001. Aerospace series. Extruded T-section, in aluminium alloys. Dimensions
BS 4475:2000 BS 4475:2000. Specification for straight mineral lubricating oils
BS EN 2071:2002 BS EN 2071:2002. Aerospace series. Sheets in aluminium and aluminium alloys. Thickness 0,25 mm ≤ a ≤ 6 mm. Dimensions
BS EN 2131:2002 BS EN 2131:2002. Aerospace series. Plates in aluminium alloys. Thickness 6 mm < a ≤ 160 mm. Dimensions
BS EN 2134:2002 BS EN 2134:2002. Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm ≤ D ≤ 220 mm. Dimensions
BS EN 2338:2001 BS EN 2338:2001. Aerospace series. Sheets, hot rolled in titanium and titanium alloys. Thickness 0,8 mm ≤ a ≤ 6 mm. Dimensions
BS EN 2599:2001 BS EN 2599:2001. Aerospace series. Strips in aluminium and aluminium alloys. Thickness 0,25 mm ≤ a ≤ 3.2 mm. Dimensions
BS EN 3145:2002 BS EN 3145:2002. Round bars, hot rolled in steel. Normal tolerances. Diameter 6 mm ≤ D ≤ 250 mm. Dimensions
BS EN 4180:2002 BS EN 4180:2002. Aerospace series. Circular tubes, for fluids in titanium and titanium alloys. Wide tolerances. Diameter 4 mm ≤ D ≤ 40 mm. Dimensions
BS ISO 10791-8:2001 BS ISO 10791-8:2001. Test conditions for machining centres. Evaluation of contouring performance in the three coordinate planes
PD R072-001:2001 PD R072-001:2001. List of interpretations on the EN 60730 series 'Automatic electrical controls for household and similar use'
BS EN 60695-6-1:2001, IEC 60695-6-1:2001 BS EN 60695-6-1:2001, IEC 60695-6-1:2001. Fire hazard testing. Smoke opacity. General guidance
BS ISO 15730:2000 BS ISO 15730:2000. Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel
ISO/IEC15938-2 : 2002 EDTN 1 ISO/IEC15938-2 : 2002 EDTN 1. ISO/IEC15938-2 : 2002 Information technology- Multimedia content description interface. Part 2: Description definition language
BS EN 1541:2001 BS EN 1541:2001. Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract
BS EN 13676:2001 BS EN 13676:2001. Polymer coated paper and board intended for food contact. Detection of pinholes
PD ISO/TR 20461:2001 PD ISO/TR 20461:2001. Determination of uncertainty for volume measurements made using the gravimetric method
BS EN 4250:2001 BS EN 4250:2001. Aerospace series. Nickel base alloys NI-B41001 (NiCr19Si7B). Filler metal for brazing. Amorphous foil
BS EN 2622:2001 BS EN 2622:2001. Aerospace Series. Circular tubes, for fluids in heat resisting alloys. Diameter 3,2 mm ≤ D ≤ 100 mm. Dimensions
BS EN 2066:2002 BS EN 2066:2002. Aerospace series. Extruded section in aluminium alloys. General tolerances
BS EN 2617:2001 BS EN 2617:2001. Aerospace Series. Plates in titanium and titanium alloys. Thickness 6 mm < a ≤ 100 mm. Dimensions
BS EN 2339:2001 BS EN 2339:2001. Aerospace series. Sheets, cold rolled in titanium and titanium alloys. Thickness 0,2 mm ≤ a ≤ 6 mm. Dimensions
BS EN 12816:2001 BS EN 12816:2001. Transportable refillable steel and aluminium LPG cylinders. Disposal
BS ISO/IEC 17799:2000, BS 7799-1:2000 BS ISO/IEC 17799:2000, BS 7799-1:2000. Information technology. Code of practice for information security management
BS ISO 15911:2000, BS 2000-355:2001 BS ISO 15911:2000, BS 2000-355:2001. Methods of test for petroleum and its products. Estimation of net specific energy of aviation turbine fuels using hydrogen content data
BS EN 1074-5:2001 BS EN 1074-5:2001. Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Control valves
BS EN 12560-1:2001 BS EN 12560-1:2001. Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic flat gaskets with or without inserts
BS EN 12560-2:2001 BS EN 12560-2:2001. Flanges and their joints. Gaskets for Class-designated flanges. Spiral wound gaskets for use with steel flanges
BS EN 12560-3:2001 BS EN 12560-3:2001. Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic PTFE envelope gaskets
BS EN 12560-4:2001 BS EN 12560-4:2001. Flanges and their joints. Gaskets for Class-designated flanges. Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
BS EN 12560-5:2001 BS EN 12560-5:2001. Flanges and their joints. Gaskets for Class-designated flanges. Metallic ring joint gaskets for use with steel flanges
BS EN 12754:2002 BS EN 12754:2002. Transportable gas cylinders. Cylinders for dissolved acetylene. Inspection at time of filling
NC/BSENISO12937/IP : 2001 NC/BSENISO12937/IP : 2001. BS EN ISO 12937 BS 2000-438 Petroleum products - Determination of water Coulometric Karl Fischer titration method
BS 7800:2000 BS 7800:2000. Automotive fuel. High octane (super) unleaded petrol. Specification
BS EN ISO 8612:2001 BS EN ISO 8612:2001. Ophthalmic instruments. Tonometers
ISO/IEC10165-9 : 2000 EDTN 1 ISO/IEC10165-9 : 2000 EDTN 1. ISO/IEC 10165-9 Information technology -- Open Systems Interconnection -- Structure of Management Information. Part :9 System management application managed object
BS EN ISO 8320-2:2001, BS 7208-19:2001 BS EN ISO 8320-2:2001, BS 7208-19:2001. Contact lenses and contact lens care products. Vocabulary. Contact lens care products
HB 10181:2001 HB 10181:2001. Transition to ISO 9001:2000
BS AU 50-1.6.2c:2002 BS AU 50-1.6.2c:2002. Tyres and wheels. Tyres. Motorcycle tyres. Specification for designations, dimensions and load ratings for metric series 100, 90, 80, 70, 60, 55 and 50 tyres
BS EN 50289-3-2:2001 BS EN 50289-3-2:2001. Communication cables. Specifications for test methods. Mechanical test methods. Tensile strength and elongation for conductor
WD/HB10164 : 1999 (revised text 12/00) WD/HB10164 : 1999 (revised text 12/00).
BS 7870-3.10:2001 BS 7870-3.10:2001.
BS 7870-3.12:2001 BS 7870-3.12:2001.
BS 7870-3.11:2001 BS 7870-3.11:2001.
BS 7870-3.20:2001 BS 7870-3.20:2001.
BS 7870-3.21:2001 BS 7870-3.21:2001.
BS 7870-3.40:2001 BS 7870-3.40:2001.
BS EN 61140:2002, IEC 61140:2001 BS EN 61140:2002, IEC 61140:2001. Protection against electric shock. Common aspects for installation and equipment
BS EN 50290-2-25:2002 BS EN 50290-2-25:2002. Communication cables. Common design rules and construction. Polypropylene insulation compounds
BS EN 50290-2-28:2002 BS EN 50290-2-28:2002. Communication cables. Common design rules and construction. Filling compounds for filled cables
BS EN 50290-2-29:2002 BS EN 50290-2-29:2002. Communication cables. Common design rules and construction. Cross-linked PE insulation compounds
BS EN 50290-2-30:2002 BS EN 50290-2-30:2002. Communication cables. Common design rules and construction. Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing
BS 6043-3.8.1:2001, ISO 12988-1:2000 BS 6043-3.8.1:2001, ISO 12988-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Carboxy reactivity of prebaked anodes. Determination of the reactivity by a loss in mass method
BS ISO 13746:2000 BS ISO 13746:2000. Textile floor coverings. Guidelines for installation and use on stairs
BS EN ISO 7094:2000 BS EN ISO 7094:2000. Plain washers. Extra large series. Product grade C
BS EN ISO 15011-1:2002 BS EN ISO 15011-1:2002. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of emission rate and sampling for analysis of particulate fume
BS 6043-2.20.1:2001, ISO 12981-1:2000 BS 6043-2.20.1:2001, ISO 12981-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Carboxy reactivity of calcined coke. Determination of the reactivity by a loss in mass method. Section 2.20: Carboxy reactivity of calcined coke Subsection 2.20.1: Determination of the reactivity by a loss in mass method
BS ISO 3616:2001 BS ISO 3616:2001. Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
BS EN ISO 1182:2002 BS EN ISO 1182:2002. Reaction to fire tests for building products. Non-combustibility test
BS EN ISO 7490:2001 BS EN ISO 7490:2001. Dental gypsum-bonded casting investments
BS EN 50365:2002 BS EN 50365:2002. Electrically insulating helmets for use on low voltage installations
BS EN 50289-4-11:2002 BS EN 50289-4-11:2002. Communication cables. Specifications for test methods. Environmental test methods. A horizontal integrated fire test method
BS ISO/IEC 14769:2001 BS ISO/IEC 14769:2001. Information technology. Open distributed processing. Type repository function
BS EN 60191-6-3:2001, IEC 60191-6-3:2001 BS EN 60191-6-3:2001, IEC 60191-6-3:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of quad flat packs (QFP)
BS ISO 9924-1:2000 BS ISO 9924-1:2000. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 2846-2:2000 BS ISO 2846-2:2000. Graphic technology. Colour and transparency of ink sets for four-colour-printing. Coldset offset lithographic printing
BS ISO 4703:2001 BS ISO 4703:2001. Test conditions for surface grinding machines with two columns. Machines for grinding slideways. Testing of the accuracy
BS ISO 98:2001 BS ISO 98:2001. Textile machinery and accessories. Spinning preparatory and spinning machinery. Main dimensions of coverings for top rollers
TS 1:2000 TS 1:2000. Issue 5.0 of the TickIT Guide
DD ENV 13710:2001 DD ENV 13710:2001. European Ordering Rules. Ordering of characters from the Latin, Greek and Cyrillic scripts
PD ISO/TR 14672:2001 PD ISO/TR 14672:2001. Graphic technology. Statistics of the natural SCID images defined in ISO 12640
PD IEC 61394:1997 PD IEC 61394:1997. Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors
BS ISO 15490:2000 BS ISO 15490:2000. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
BS EN 13088:2001 BS EN 13088:2001. Manufactured articles filled with feather and down. Method for the determination of a filled product's total mass and of the mass of the filling
BS EN 1107-2:2001 BS EN 1107-2:2001. Flexible sheets for waterproofing. Determination of dimensional stability. Plastic and rubber sheets for roof waterproofing
CWA 14087:2000 CWA 14087:2000. European call centre standards for training and qualification. Customer contact representatives
BS EN 12839:2001 BS EN 12839:2001. Precast concrete products. Elements for fences
BS EN 13073:2001 BS EN 13073:2001. Footwear. Test methods for whole shoe. Water resistance
BS ISO 13563-1:2001 BS ISO 13563-1:2001. Single side loading fork-lift trucks. Stability tests
BS EN 12699:2001 BS EN 12699:2001. Execution of special geotechnical work. Displacement piles
BS EN 1757-1:2001 BS EN 1757-1:2001. Safety of industrial trucks. Pedestrian propelled trucks. Stacker trucks
BS EN 1757-2:2001 BS EN 1757-2:2001. Safety of industrial trucks. Pedestrian propelled trucks. Pallet trucks
BS IEC 61584:2001 BS IEC 61584:2001. Radiation protection instrumentation. Installed, portable or transportable assemblies. Measurement of air kerma direction and air kerma rate
BS EN ISO 3497:2001 BS EN ISO 3497:2001. Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods
BS EN 13366:2001 BS EN 13366:2001. Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
BS EN 13368-1:2001 BS EN 13368-1:2001. Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDTA, HEDTA and DTPA
BS EN 13368-2:2001 BS EN 13368-2:2001. Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDDHA and EDDHMA
DD ENV 12977-1:2001 DD ENV 12977-1:2001. Thermal solar systems and components. Custom built systems. General requirements
DD ENV 12977-3:2001 DD ENV 12977-3:2001. Thermal solar systems and components. Custom built systems. Performance characterisation of stores for solar heating systems
DD ENV 12977-2:2001 DD ENV 12977-2:2001. Thermal solar systems and components. Custom built systems. Test methods
BS EN 2344:2001 BS EN 2344:2001. Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm < D < 180 mm. Dimensions
BS EN 13111:2001 BS EN 13111:2001. Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration
BS EN 3882:2001 BS EN 3882:2001. Aerospace series. Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2). Filler wire for welding
BS EN 3883:2001 BS EN 3883:2001. Aerospace series. Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2). Filler metal for welding
BS EN 13416:2001 BS EN 13416:2001. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling
BS EN 3884:2001 BS EN 3884:2001. Aerospace series. Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti). Filler metal for welding
BS ISO 704:2000 BS ISO 704:2000. Terminology work. Principles and methods
BS EN 3885:2001 BS EN 3885:2001. Aerospace series. Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4). Filler metal for welding
BS EN 3146:2001 BS EN 3146:2001. Aerospace series. Round bars, hot rolled in steel. Close tolerances. Diameter 6mm ≤ D ≤ 250mm. Dimensions
BS EN 3842:2001 BS EN 3842:2001. Aerospace series. Circular tubes for fluids in corrosion resistant steel. Diameter 3,2 mm ≤ D ≤ 100 mm. Thickness 0,32 mm ≤ a ≤ 2,5 mm. Dimensions
BS EN 3961:2001 BS EN 3961:2001. Aerospace series. Gold base alloy AU-B4000. Filler metal for brazing. Rolled foil
BS EN 3962:2001 BS EN 3962:2001. Aerospace series. Gold base alloy AU-B40001. Filler metal for brazing. Wire
BS EN 13031-1:2001 BS EN 13031-1:2001. Greenhouses. Design and construction. Commercial production greenhouses
BS EN 3963:2001 BS EN 3963:2001. Aerospace series. Copper CU-BU9001. Filler metal for brazing. Rolled foil
BS EN 3964:2001 BS EN 3964:2001. Aerospace series. Copper CU-BU9001. Filler metal for brazing. Wire
BS EN 1096-3:2001 BS EN 1096-3:2001. Glass in building. Coated glass. Requirements and test methods for class C and D coatings
BS EN 1096-2:2001 BS EN 1096-2:2001. Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings
BS EN 3965:2001 BS EN 3965:2001. Aerospace series. Titanium alloy TI-B17001. Filler metal for brazing. Rolled foil
BS EN 4045:2001 BS EN 4045:2001. Aerospace series. Capillary tubes, seamless in heat resisting alloys. Diameter 0,6 mm ≤ D ≤ 2 mm. Dimensions
BS EN 4104:2001 BS EN 4104:2001. Aerospace series. Nickel base alloy NI-B40002. Filler metal for brazing. Powder or paste.
BS EN 4267:2001 BS EN 4267:2001. Aerospace series. Round bar in titanium and titanium alloys. Diameter 6 mm ≤ D ≤ 160 mm. Dimensions
BS EN 3506:2001 BS EN 3506:2001. Aerospace series. Hot rolled sheets and plates in heat resisting alloys. Thickness 2,0 mm ≤ a ≤ 100 mm. Dimensions
BS EN 13011:2001 BS EN 13011:2001. Transport services. Goods transport chains. System for declaration of performance conditions
BS 7413:2002 BS 7413:2002. Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors. Specification
BS EN 12444:2001 BS EN 12444:2001. Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation
BS EN 61334-6:2001, IEC 61334-6:2000 BS EN 61334-6:2001, IEC 61334-6:2000. Distribution automation using distribution line carrier systems. A-XDR encoding rule
BS ISO 18901:2002 BS ISO 18901:2002. Imaging materials. Processed silver-gelatin type black-and-white film. Specifications for stability
BS ISO 17410:2001 BS ISO 17410:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of psychrotrophic micro-organisms
BS ISO 11807-2:2001 BS ISO 11807-2:2001. Integrated optics. Vocabulary. Terms used in classification
BS ISO 11807-1:2001 BS ISO 11807-1:2001. Integrated optics. Vocabulary. Basic terms and symbols
DD ENV 14029:2001 DD ENV 14029:2001. Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
DD ENV 1591-2:2001 DD ENV 1591-2:2001. Flanges and their joints. Design rules for gasketed circular flange connections. Gasket parameters
BS EN ISO 10683:2000 BS EN ISO 10683:2000. Fasteners. Non-electrolytically applied zinc flake coatings
BS EN 13274-1:2001 BS EN 13274-1:2001. Respiratory protective devices. Methods of test. Determination of inward leakage and total inward leakage
BS EN 13274-2:2001 BS EN 13274-2:2001. Respiratory protective devices. Methods of test. Practical performance tests
BS EN 13290-2:2001 BS EN 13290-2:2001. Space project management. General requirements. Project breakdown structure
BS EN 13290-4:2001 BS EN 13290-4:2001. Space project management. General requirements. Project phasing and planning
BS EN 13290-5:2001 BS EN 13290-5:2001. Space project management. General requirements. Configuration management
BS EN 13290-6:2001 BS EN 13290-6:2001. Space project management. General requirements. Information/documentation management
BS EN 13290-7:2001 BS EN 13290-7:2001. Space project management. General requirements. Cost and schedule management
BS EN 60743:2001 BS EN 60743:2001. Live working. Terminology for tools, equipment and devices
BS EN ISO 14729:2001, BS 7208-26:2001 BS EN ISO 14729:2001, BS 7208-26:2001. Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
BS EN 62056-62:2002 BS EN 62056-62:2002. Electricity metering. Data exchange for meter reading, tariff and load control. Interface classes
BS EN 13125:2001 BS EN 13125:2001. Shutters and blinds. Additional thermal resistance. Allocation of a class of air permeability to a product
BS EN 60601-2-5:2001 BS EN 60601-2-5:2001. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of ultrasonic physiotherapy equipment
BS EN 62056-53:2002 BS EN 62056-53:2002. Electricity metering. Data exchange for meter reading, tariff and load control. COSEM application layer
BS ISO 128-30:2001 BS ISO 128-30:2001. Technical drawings. General principles of presentation. Basic conventions for views
BS EN 13051:2001 BS EN 13051:2001. Curtain walling. Watertightness. Site test
BS EN 12833:2001 BS EN 12833:2001. Skylight and conservatory roller shutters. Resistance to snow load. Test method
BS EN ISO 12215-1:2000 BS EN ISO 12215-1:2000. Small craft. Hull construction and scantlings. Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate
PD IEC TR 62221:2001 PD IEC TR 62221:2001. Optical fibres. Measurement methods. Microbending sensitivity
BS6399-2 : 1997 BS6399-2 : 1997 . BS6399-2 : 1997 Loading for buildings. Part 2: Code of practice for wind loads
BS EN ISO 2580-1:2001 BS EN ISO 2580-1:2001. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Designation system and basis for specifications
BS ISO 9276-2:2001 BS ISO 9276-2:2001. Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
ISO/IEC2593 : 2000 EDTN 4 ISO/IEC2593 : 2000 EDTN 4. ISO/IEC2593 ISO/IEC 2593 Fourth Edition Information technology -- Telecommunications and information exchange between systems -- 34-pole DTC/DCE interface connector mateability dimensions and contact number assignments
BS EN ISO/IEC 13818-9:2001 BS EN ISO/IEC 13818-9:2001. Information technology. Generic coding of moving pictures and associated audio information. Extension for real time interface for systems decoders
BS 146:2002 BS 146:2002. Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1
BS ISO 6954:2000 BS ISO 6954:2000. Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
BS EN 13214:2001 BS EN 13214:2001. Thermal spraying. Thermal spray coordination. Tasks and responsibilities
BS EN 13507:2001 BS EN 13507:2001. Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying
DD ENV 1852-2:2001 DD ENV 1852-2:2001. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity
DD ENV 1453-2:2001 DD ENV 1453-2:2001. Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
DD ENV 1401-2:2001 DD ENV 1401-2:2001. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity
BS IEC TR 62157:2001 BS IEC TR 62157:2001. Cylindrical machined carbon electrodes. Nominal dimensions
BS EN 80:2001 BS EN 80:2001. Wall-hung urinals. Connecting dimensions
DD IEC TS 61334-5-4:2001 DD IEC TS 61334-5-4:2001. Distribution automation using distribution line carrier systems. Lower layer profiles. Multi-carrier modulation (MCM) profile
BS EN 61850-4:2002, IEC 61850-4:2002 BS EN 61850-4:2002, IEC 61850-4:2002. Communication networks and systems in substations. System and project management
BS EN 61850-3:2002, IEC 61850-3:2002 BS EN 61850-3:2002, IEC 61850-3:2002. Communication networks and systems in substations. General requirements
DD IEC TS 60870-6-602:2001 DD IEC TS 60870-6-602:2001. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE transport profiles
BS EN 60086-5:2001 BS EN 60086-5:2001. Primary batteries. Safety of batteries with aqueous electrolyte
BS EN 61834-6:2001, IEC 61834-6:2000 BS EN 61834-6:2001, IEC 61834-6:2000. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). SDL format
BS EN 984:2001 BS EN 984:2001. Textile floor coverings. Determination of the mass per unit area of the use surface of needled floor coverings
BS 8219:2001 BS 8219:2001. Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
DD IEC TS 61334-5-5:2001 DD IEC TS 61334-5-5:2001. Distribution automation using distribution line carrier systems. Lower layer profiles. Spread spectrum-fast frequency hopping (SS-FFH) profile
BS EN 591:2001 BS EN 591:2001. Instructions for use for in vitro diagnostic instruments for professional use
BS EN 375:2001 BS EN 375:2001. Information supplied by the manufacturer with in vitro diagnostic reagents for professional use
BS EN 60695-2-10:2001, IEC 60695-2-10:2000 BS EN 60695-2-10:2001, IEC 60695-2-10:2000. Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
BS EN 60695-2-11:2001, IEC 60695-2-11:2001 BS EN 60695-2-11:2001, IEC 60695-2-11:2001. Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products
BS EN 60695-2-12:2001, IEC 60695-2-12:2000 BS EN 60695-2-12:2001, IEC 60695-2-12:2000. Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire flammability test method for materials
BS EN 60695-2-13:2001, IEC 60695-2-13:2000 BS EN 60695-2-13:2001, IEC 60695-2-13:2000. Fire hazard testing. Test methods. Glowing/hot-wire based tests methods. Glow-wire ignitability test method for materials
BS EN 771-6:2001 BS EN 771-6:2001. Specification for masonry units. Natural stone masonry units
BS EN 4233:2001 BS EN 4233:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, welded, threaded
BS 4723:2002 BS 4723:2002. Stretch covers for upholstered furniture. Specification
BS ISO 4512:2000 BS ISO 4512:2000. Petroleum and liquid petroleum products. Equipment for measurement of liquid levels in storage tanks. Manual methods
PD CR 13644:2001 PD CR 13644:2001. Machine readable cards. Healthcare applications. Logical organization of data on healthcare professional cards
PD CR 13643:2001 PD CR 13643:2001. Machine readable cards. Healthcare applications. Logical data structures and concepts for different card technologies for use by patients in health applications
BS EN 61300-3-5:2001, IEC 61300-3-5:2000 BS EN 61300-3-5:2001, IEC 61300-3-5:2000. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation
BS 2000-146:2000 BS 2000-146:2000. Methods of test for petroleum and its products. Determination of foaming characteristics of lubricating oils
BS EN 60191-6-6:2001, IEC 60191-6-6:2001 BS EN 60191-6-6:2001, IEC 60191-6-6:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for fine pitch land grid array (FLGA). Proposed amendment on terminology
BS EN 13123-1:2001 BS EN 13123-1:2001. Windows, doors and shutters. Explosion resistance. Requirements and classification. Shock tube
CWA 13943:2000 CWA 13943:2000. Lightweight directory access protocol (LDAP) V3: Level of support of LDAP server
CWA 13944:2000 CWA 13944:2000. X.500 profile ADY42. Directory system access (DAS) authentication as directory access protocol (DAP) responder
BS EN 13124-1:2001 BS EN 13124-1:2001. Windows, doors and shutters. Explosion resistance. Test method. Shock tube
BS 1000:Aux 1e [71+73]:2001 BS 1000:Aux 1e [71+73]:2001. Universal Decimal Classification. English full edition. Auxiliary table 1e [71+73]. Common auxiliaries of place for Canada and the United States of America. Extended edition
BS 2000-272:2000 BS 2000-272:2000. Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method
BS EN 13523-1:2001 BS EN 13523-1:2001. Coil coated metals. Test methods. Coating thickness
BS EN ISO 10692-2:2001 BS EN ISO 10692-2:2001. Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Specification and type testing for valve to cylinder connections
ISO15500-3 : 2001 EDTN.1 ISO15500-3 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 3: Check valve
ISO15500-4 : 2001 EDTN.1 ISO15500-4 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 4: Manual valve
ISO15500-5 : 2001 EDTN.1 ISO15500-5 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 5: Manual cylinder valve
ISO15500-6 : 2001 EDTN.1 ISO15500-6 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 6: Automatic valve
ISO15500-8 : 2001 EDTN.1 ISO15500-8 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 8: Pressure indicator
ISO15500-9 : 2001 EDTN.1 ISO15500-9 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 9: Pressure regulator
ISO15500-10 : 2001 EDTN.1 ISO15500-10 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 10: Gas-flow adjuster
ISO15500-15 : 2001 EDTN.1 ISO15500-15 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 15: Gas-tight housing and ventilation hose
ISO15500-17 : 2001 EDTN.1 ISO15500-17 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 17: Flexible fuel line
ISO15500-18 : 2001 EDTN.1 ISO15500-18 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 18: Filter
ISO15500-19 : 2001 EDTN.1 ISO15500-19 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 19: Fittings
ISO15500-16 : 2001 EDTN 1 ISO15500-16 : 2001 EDTN 1. ISO15500-16 : 2001 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 16: NGV rigid fuel line
ISO15500-2 : 2001 EDTN 1 ISO15500-2 : 2001 EDTN 1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 2: Performance & Tests
BS EN 61937:2001 BS EN 61937:2001. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
BS 5660-2:2001, ISO 3082:2000 BS 5660-2:2001, ISO 3082:2000. Methods of sampling iron ores. Sampling and sample preparation procedures
BS ISO/IEC 14515-1:2000 BS ISO/IEC 14515-1:2000. Information technology. Portable Operating Systems Interface (POSIX). Test methods for measuring conformance to POSIX. System interfaces
BS EN 13523-4:2001 BS EN 13523-4:2001. Coil coated metals. Test methods. Pencil hardness
BS EN 13523-5:2001 BS EN 13523-5:2001. Coil coated metals. Test methods. Resistance to rapid deformation (impact test)
BS EN 561:2002 BS EN 561:2002. Gas welding equipment. Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS EN 13523-7:2001 BS EN 13523-7:2001. Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 13523-10:2001 BS EN 13523-10:2001. Coil coated metals. Test methods. Resistance to fluorescent UV light and water condensation
BS 1858:2002 BS 1858:2002. Electric cables. Accessories. Bitumen-based filling compounds
KIT 63 KIT 63. Cleanrooms kit
KIT 62 KIT 62. Soil improvers methods kit


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment