2009/09/07

Cheapest & Latest BSI Standard (PDF) (21)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 61300-2-12:2005 BS EN 61300-2-12:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Impact
BS EN 14391:2004 BS EN 14391:2004. Packaging. Collapsible aluminium tubes. Tactile warnings of danger
BS EN 14071:2004 BS EN 14071:2004. Pressure relief valves for LPG tanks. Ancillary equipment
BS EN 13795-2:2004 BS EN 13795-2:2004. Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. Test methods
BS ISO 14490-2:2005 BS ISO 14490-2:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for binocular systems
BS 5482-1:2005 BS 5482-1:2005. Code of practice for domestic butane- and propane-gas-burning installations. Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper
BS EN 13876:2002 BS EN 13876:2002. Transport. Logistics and services. Goods transport chains. Code of practice for the provision of cargo transport services
BS EN 13463-2:2004 BS EN 13463-2:2004. Non-electrical equipment for use in potentially explosive atmospheres. Protection by flow restricting enclosure "fr"
BS EN 14034-4:2004 BS EN 14034-4:2004. Determination of explosion characteristics of dust clouds. Determination of the limiting oxygen concentration LOC of dust clouds
BS EN 1804-3:2006 BS EN 1804-3:2006. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Hydraulic control systems
BS EN ISO 16032:2004 BS EN ISO 16032:2004. Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method
BS EN 13877-1:2004 BS EN 13877-1:2004. Concrete pavements. Materials
BS EN ISO/IEC 17040:2005 BS EN ISO/IEC 17040:2005. Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
BS 7843-3.2:2005 BS 7843-3.2:2005. Guide to the acquisition and management of meteorological precipitation data. Specifcation for raingauges. Tipping bucket gauges
BS ISO 4037-4:2004 BS ISO 4037-4:2004. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Calibration of area and personal dosemeters in low energy X reference radiation fields
BS EN ISO/IEC 17011:2004 BS EN ISO/IEC 17011:2004. Conformity assessment. General requirements for accreditation bodies accrediting conformity assessment bodies
BS EN 1325-2:2004 BS EN 1325-2:2004. Value management, value analysis, functional analysis vocabulary. Value management
BS EN 1504-4:2004 BS EN 1504-4:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural bonding
BS EN 1504-2:2004 BS EN 1504-2:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Surface protection systems for concrete
BS EN ISO 17642-3:2005 BS EN ISO 17642-3:2005. Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Externally loaded tests
BS EN ISO 17642-2:2005 BS EN ISO 17642-2:2005. Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Self-restraint tests
BS EN 61158-2:2004 BS EN 61158-2:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Physical layer specification and service definition
PD 6547:2004 PD 6547:2004. Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3
BS EN 4057-405:2005 BS EN 4057-405:2005. Aerospace series. Cable ties for harnesses. Test methods. Compass safe distance
BS EN 4057-301:2005 BS EN 4057-301:2005. Aerospace series. Cable ties for harnesses. Test methods. Salt mist test
BS EN ISO 11192:2005 BS EN ISO 11192:2005. Small craft. Graphical symbols
ISO5922 : 2005 (R08) EDTN 2 ISO5922 : 2005 (R08) EDTN 2. ISO5922 : 2005 Malleable cast iron
ISO/TS18173 : 2005 EDTN1 ISO/TS18173 : 2005 EDTN1. ISO/TS18173 : 2005 Non-destructive testing - General terms and definitions
BS EN 13954:2005 BS EN 13954:2005. Food processing machinery. Bread slicers. Safety and hygiene requirements
BS ISO 15885:2002 BS ISO 15885:2002. Milk fat. Determination of fatty acid composition by gas-liquid chromatography
BS EN 13978-1:2005 BS EN 13978-1:2005. Precast concrete products. Precast concrete garages. Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
BS ISO 1268-11:2005 BS ISO 1268-11:2005. Fibre-reinforced plastics. Methods of producing test plates. Injection moulding of BMC and other long-fibre moulding compounds. Small plates
BS ISO 1268-10:2005 BS ISO 1268-10:2005. Fibre-reinforced plastics. Methods of producing test plates. Injection moulding of BMC and other long-fibre compounds. General principles and moulding of multipurpose test specimens
BS EN 14018:2005 BS EN 14018:2005. Agricultural and forestry machinery. Seed drills. Safety
BS EN 50090-9-1:2004 BS EN 50090-9-1:2004. Home and building electronic systems (HBES). Installation requirements. Generic cabling for HBES class 1 twisted pair
BS EN 1870-15:2004 BS EN 1870-15:2004. Safety of woodworking machines. Circular sawing machines. Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN ISO 21567:2004 BS EN ISO 21567:2004. Microbiology of foods and animal feeding stuffs. Horizontal method for the detection of Shigella spp.
BS EN 14853:2005 BS EN 14853:2005. Aerosol containers. Enclosed space ignition test
BS EN 14852:2006 BS EN 14852:2006. Aerosol containers. Determination of the ignition distance of the spray jet
BS EN 14851:2005 BS EN 14851:2005. Aerosol containers. Aerosol foam flammability test
BS ISO 2942:2004 BS ISO 2942:2004. Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point
DD CEN/TS 13778:2005 DD CEN/TS 13778:2005. Mobile demolition machinery. Safety requirements
BS EN 1021-2:2006 BS EN 1021-2:2006. Furniture. Assessment of the ignitability of upholstered furniture. Ignition source match flame equivalent
BS EN 1021-1:2006 BS EN 1021-1:2006. Furniture. Assessment of the ignitability of upholstered furniture. Ignition source smouldering cigarette
BS EN 61800-3:2004 BS EN 61800-3:2004. Adjustable speed electrical power drive systems. EMC requirements and specific test methods
BS EN ISO 7933:2004 BS EN ISO 7933:2004. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS ISO 14943:2004 BS ISO 14943:2004. Nuclear energy. Nuclear fuel technology. Administrative criteria related to criticality safety
BS EN 10027-1:2005 BS EN 10027-1:2005. Designation system for steels. Steel names
BS EN 14614:2004, BS 6068-5.36:2004 BS EN 14614:2004, BS 6068-5.36:2004. Water quality. Guidance standard for assessing the hydromorphological features of rivers
BS EN 60118-13:2005 BS EN 60118-13:2005. Electroacoustics. Hearing aids. Electromagnetic compatibility (EMC)
BS ISO 16241:2005 BS ISO 16241:2005. Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
ISO4064-3 : 2005 EDTN3 ISO4064-3 : 2005 EDTN3. ISO4064-3 : 2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water
ISO4064-1 : 2005 EDTN3 ISO4064-1 : 2005 EDTN3. ISO4064 : 2005 Measurement of water flow in closed fully chaged conduits - Meters for cold potable water and hot water. Part 1: Specifications
BS EN 14683:2005 BS EN 14683:2005. Surgical masks. Requirements and test methods
BS ISO 5834-4:2005 BS ISO 5834-4:2005. Implants for surgery. Ultra-high molecular weight polyethylene. Oxidation index measurement method
DD ISO/TS 18835:2004 DD ISO/TS 18835:2004. Inhalational anaesthesia systems. Draw-over vaporizers and associated equipment
BS EN 60512-23-7:2005 BS EN 60512-23-7:2005. Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23g. Effective transfer impedance of connectors
BS EN 14781:2005 BS EN 14781:2005. Racing bicycles. Safety requirements and test methods
BS EN 14766:2005 BS EN 14766:2005. Mountain-bicycles. Safety requirements and test methods
BS ISO 17082:2004 BS ISO 17082:2004. Pneumatic fluid power. Valves. Data to be included in supplier literature
BS EN 60118-8:2005 BS EN 60118-8:2005. Electroacoustics. Hearing aids. Methods of measurement of performance characteritics of hearing aids under simulated in situ working conditions
BS EN 13950:2005 BS EN 13950:2005. Gypsum plasterboard thermal/acoustic insulation composite panels. Definitions, requirements and test methods
BS EN ISO 11553-1:2005 BS EN ISO 11553-1:2005. Safety of machinery. Laser processing machines. General safety requirements
BS EN ISO 10240:2004 BS EN ISO 10240:2004. Small craft. Owner's manual
BS EN ISO 11197:2004 BS EN ISO 11197:2004. Medical supply units
BS EN ISO 12402-8:2006 BS EN ISO 12402-8:2006. Personal flotation devices. Accessories. Safety requirements and test methods
BS EN ISO 13397-2:2005 BS EN ISO 13397-2:2005. Dentistry. Periodontal curettes, dental scalers and excavators. Periodontal curettes of Gr-type
BS ISO 16004:2005 BS ISO 16004:2005. Aircraft ground equipment. Passenger boarding bridge or transfer vehicle. Requirements for interface with aircraft doors
BS ISO 7981-2:2005 BS ISO 7981-2:2005. Water quality. Determination of polycyclic aromatic hydrocarbons (PAH). Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction
BS ISO 7981-1:2005 BS ISO 7981-1:2005. Water quality. Determination of polycyclic aromatic hydrocarbons (PAH). Determination of six PAH by high performance thin layer chromatography with fluorescence detection after liquid-liquid extraction
BS ISO 5168:2005 BS ISO 5168:2005. Measurement of fluid flow. Procedures for the evaluation of uncertainties
BS EN 13877-2:2004 BS EN 13877-2:2004. Concrete pavements. Functional requirements for concrete pavements
BS EN 13210:2004 BS EN 13210:2004. Child care articles. Children's safety harnesses, reins and similar type articles. Safety requirements and test methods
BS EN 13209-1:2004 BS EN 13209-1:2004. Child use and care articles. Baby carriers. Safety requirements and test methods. Framed back carriers
BS ISO 19258:2005 BS ISO 19258:2005. Soil quality. Guidance on the determination of background values
ISO16049-2 : 2005 EDTN1 ISO16049-2 : 2005 EDTN1. International Standard ISO16049-2 : 2005 Air cargo equipment - Restraint straps -. Part 2: Utilization guidelines and lashing calculations
DD 7971-9:2005 DD 7971-9:2005. Protective clothing and equipment for use in violent situations and in training. Training suits and equipment. Requirements and test methods
BS EN 10025-6:2004 BS EN 10025-6:2004. Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
BS EN 10025-5:2004 BS EN 10025-5:2004. Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
BS EN 10025-4:2004 BS EN 10025-4:2004. Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
PD CEN ISO/TR 17641-3:2005 PD CEN ISO/TR 17641-3:2005. Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Externally loaded tests
BS EN ISO 17641-2:2005 BS EN ISO 17641-2:2005. Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Self-restraint tests
BS ISO 799:2004 BS ISO 799:2004. Ships and marine technology. Pilot ladders
BS EN 10204:2004 BS EN 10204:2004. Metallic materials. Types of inspection documents
BS EN ISO 12402-1:2005 BS EN ISO 12402-1:2005. Personal flotation devices. Lifejackets for seagoing ships. Safety requirements
BS EN 14916:2005 BS EN 14916:2005. Domestic cookware. Graphical symbols (pictograms)
BS EN ISO 15609-3:2004 BS EN ISO 15609-3:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Electron beam welding
BS EN 9103:2005 BS EN 9103:2005. Aerospace series. Quality management systems. Variation management of key characteristics
BS EN 9102:2006 BS EN 9102:2006. Aerospace series. Quality systems. First article inspection
BS EN ISO 15012-1:2004 BS EN ISO 15012-1:2004. Health and safety in welding and allied processes. Requirements testing and marking of equipment for air filtration. Testing of the separation efficiency for welding fume
BS 8447:2005 BS 8447:2005. Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device
BS EN ISO 15614-10:2005 BS EN ISO 15614-10:2005. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Hyperbaric dry welding
BS EN ISO 18856:2005, BS 6068-2.94:2005 BS EN ISO 18856:2005, BS 6068-2.94:2005. Water quality. Determination of selected phthalates using gas chromatography/mass spectrometry
BS EN 13886:2005 BS EN 13886:2005. Food processing machinery. Cooking kettles equipped with powered stirrer and/or mixer. Safety and hygiene requirements
BS EN 12312-11:2005 BS EN 12312-11:2005. Aircraft ground support equipment. Specific requirements. Container/pallet dollies and loose load trailers
BS EN ISO 13732-3:2005 BS EN ISO 13732-3:2005. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Cold surfaces
BS ISO 8434-3:2005 BS ISO 8434-3:2005. Metallic tube connections for fluid power and general use. O-ring face seal connectors
BS EN 13885:2005 BS EN 13885:2005. Food processing machinery. Clipping machines. Safety and hygiene requirements
BS EN 4049-002:2005 BS EN 4049-002:2005. Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°C. General
BS EN 62197-1:2006 BS EN 62197-1:2006. Connectors for electronic equipment. Quality assessment requirements. Generic specification
BS ISO 3984:2004 BS ISO 3984:2004. Road vehicles. Rear moving barrier impact test procedure
BS EN 2591-423:2006 BS EN 2591-423:2006. Aerospace series. Elements of electrical and optical connection. Test methods. Connector rear accessories thread strength
BS ISO 14954:2005 BS ISO 14954:2005. Space systems. Dynamic and static analysis. Exchange of mathematical models
BS EN 60512-25-5:2004 BS EN 60512-25-5:2004. Connectors for electronic equipment. Tests and measurements. Test 25e. Return loss
BS EN 2591-515:2005 BS EN 2591-515:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Hydrolytic stability
BS ISO 17899:2004 BS ISO 17899:2004. Ships and marine technology. Marine electric window wipers
BS EN 13870:2005 BS EN 13870:2005. Food processing machinery. Chop cutting machines. Safety and hygiene requirements
BS EN 13863-3:2004 BS EN 13863-3:2004. Concrete pavements. Test methods for the determination of the thickness of a concrete pavement from cores
BS ISO 16200-2:2000 BS ISO 16200-2:2000. Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Diffusive sampling method
BS ISO 8518:2001 BS ISO 8518:2001. Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method
BS ISO 11358-2:2005 BS ISO 11358-2:2005. Plastics. Thermographimetry (TG) of polymers. Determination of activation energy
BS EN ISO 1133:2005 BS EN ISO 1133:2005. Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN 61753-061-3:2004 BS EN 61753-061-3:2004. Fibre optic interconnecting devices and passive components performance standard. Single-mode fibre optic pigtailed style isolators for category U. Uncontrolled environment
BS EN 61753-091-3:2004 BS EN 61753-091-3:2004. Fibre optic interconnecting devices and passive components performance standards. Performance standard. Single-mode fibre optic pigtailed style circulators for category U. Uncontrolled environment
BS EN 1011-6:2005 BS EN 1011-6:2005. Welding. Recommendations for welding of metallic materials. Laser beam welding
BS EN ISO 9919:2005 BS EN ISO 9919:2005. Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
BS EN 12042:2005 BS EN 12042:2005. Food processing machinery. Automatic dividers. Safety and hygiene requirements
BS EN 2266-007:2005 BS EN 2266-007:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C. UV laser printable multicore jacketed cable. Product standard
BS ISO 6980-2:2004 BS ISO 6980-2:2004. Nuclear energy. Reference beta-particle radiation. Calibration fundamentals related to basic quantities characterizing the radiation field
BS ISO 14612:2004 BS ISO 14612:2004. Ships and marine technology. Ship's bridge layout and associated equipment. Requirements and guidelines for centralized and intergrated bridge functions.
BS EN ISO 6416:2005 BS EN ISO 6416:2005. Hydrometry. Measurement of discharge by the ultrasonic (acoustic) method
BS EN 13802:2004 BS EN 13802:2004. Railway applications. Suspension components. Hydraulic dampers
DD CLC TS 50349:2004 DD CLC TS 50349:2004. Qualification of electrical installation contractors
BS ISO 16604:2004 BS ISO 16604:2004. Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
BS ISO 16603:2004 BS ISO 16603:2004. Clothing for protection against contact with blood and body fluids. Determination of the resistance of protective clothing materials to penetration by blood and body fluids. Test method using synthetic blood
BS EN 1060-4:2004 BS EN 1060-4:2004. Non-invasive sphygmomanometers. Test procedures to determine the overall system accuracy of automated non-invasive sphygmomanometers
BS EN 60480:2004 BS EN 60480:2004. Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
BS EN 2243-6:2005 BS EN 2243-6:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Determination of shear stress and shear strain
BS EN 2243-5:2005 BS EN 2243-5:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Ageing tests
BS EN 2243-4:2005 BS EN 2243-4:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Metal-honeycomb core flatwise tensile test
BS EN 2243-3:2005 BS EN 2243-3:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Peeling test metal-honeycomb core
BS EN 2243-2:2005 BS EN 2243-2:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Peel metal-metal
BS EN 2243-1:2005 BS EN 2243-1:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Single lap shear
BS EN 9120:2005 BS EN 9120:2005. Aerospace series. Quality management systems. Requirements for stockist distributors
BS EN 9110:2005 BS EN 9110:2005. Aerospace series. Quality systems. Model for quality assurance applicable to maintenance organizations
BS EN 13824:2004 BS EN 13824:2004. Sterilization of medical devices. Aseptic processing of liquid medical devices. Requirements
BS EN 14584:2005 BS EN 14584:2005. Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Planar location of AE sources
BS EN 14127:2004 BS EN 14127:2004. Non-destructive testing. Ultrasonic thickness measurement
BS EN ISO 18613:2003 BS EN ISO 18613:2003. Repair of flat wooden pallets
BS EN ISO 8611-1:2004 BS EN ISO 8611-1:2004. Pallets for materials handling. Flat pallets. Test methods
BS EN ISO 8106:2004 BS EN ISO 8106:2004. Glass containers. Dermination of capacity by gravimetric method. Test method
BS EN ISO 16103:2005 BS EN ISO 16103:2005. Packaging. Transport packages for dangerous goods. Recycled plastics material
BS EN 1168:2005 BS EN 1168:2005. Precast concrete products. Hollow core slabs
BS EN 13782:2005 BS EN 13782:2005. Temporary structures. Tents. Safety
BS EN 12504-3:2005 BS EN 12504-3:2005. Testing concrete in structures. Determination of pull-out force
BS EN ISO 16101:2004 BS EN ISO 16101:2004. Packaging. Transport packaging for dangerous goods. Plastics compatibility testing
BS ISO 16549:2004 BS ISO 16549:2004. Textiles. Unevenness of textile strands. Capacitance method
BS EN 13796-1:2005 BS EN 13796-1:2005. Safety requirements for cableway installations designed to carry persons. Carriers. Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
BS EN 13596:2004 BS EN 13596:2004. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of bond strength
BS 5911-5:2004 BS 5911-5:2004. Concrete pipes and ancillary concrete products. Specification for prestressed non-pressure pipes and fittings with flexible joints
BS ISO 9213:2004 BS ISO 9213:2004. Measurement of total discharge in open channels. Electromagnetic method using a full-channel-width coil
BS EN ISO 7458:2004 BS EN ISO 7458:2004. Glass containers. Internal pressure resistance. Test methods
BS EN ISO 7459:2004 BS EN ISO 7459:2004. Glass containers. Thermal shock resistance and thermal shock endurance. Test methods
BS EN ISO 8113:2004 BS EN ISO 8113:2004. Glass containers. Resistance to vertical load. Test method
BS EN 14479:2004 BS EN 14479:2004. Packaging. Flexible packaging material. Determination of residual solvents by dynamic headspace gas chromatography. Absolute method
BS EN 50134-5:2004 BS EN 50134-5:2004. Alarm systems. Social alarm systems. Interconnections and communications
BS EN 14477:2004 BS EN 14477:2004. Packaging. Flexible packaging material. Determination of puncture resistance. Test methods
BS EN 14401:2004 BS EN 14401:2004. Rigid plastics containers. Methods to test the effectiveness of closures
BS EN 14854:2005 BS EN 14854:2005. Aerosol containers. Glass containers. Dimensions of the neck finish
BS EN 14850:2005 BS EN 14850:2005. Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height
BS EN 14849:2005 BS EN 14849:2005. Aerosol containers. Glass containers. Dimensions of aerosol valve ferrules
BS EN 14847:2005 BS EN 14847:2005. Aerosol containers. Tinplate containers. Dimensions of the 25,4 mm (one inch) aperture
BS EN 14324:2004 BS EN 14324:2004. Brazing. Guidance on the application of brazed joints
BS EN 1330-7:2005 BS EN 1330-7:2005. Non-destructive testing. Terminology. Terms used in magnetic particle testing
BS EN 10025-3:2004 BS EN 10025-3:2004. Hot rolled products of structural steels. Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
BS EN 10025-2:2004 BS EN 10025-2:2004. Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels
DD CLC/TS 50131-2-6:2004 DD CLC/TS 50131-2-6:2004. Alarm systems. Intrusion systems. Requirements for opening contacts (magnetic)
BS EN 10080:2005 BS EN 10080:2005. Steel for the reinforcement of concrete. Weldable reinforcing steel. General
ISO17640 : 2005 EDTN1 ISO17640 : 2005 EDTN1. ISO17640 : 2005 Non-destructive testing of welds - Ultrasonic testing of welded joints
BS EN ISO 8536-11:2004 BS EN ISO 8536-11:2004. Infusion equipment for medical use. Infusion filters for use with pressure infusion equipment
BS EN ISO 8536-10:2004 BS EN ISO 8536-10:2004. Infusion equipment for medical use. Accessories for fluid lines for use with pressure infusion equipment
BS EN ISO 8536-9:2004 BS EN ISO 8536-9:2004. Infusion equipment for medical use. Fluid lines for use with pressure infusion equipment
BS EN ISO 8536-8:2004 BS EN ISO 8536-8:2004. Infusion equipment for medical use. Infusionequipment for use with pressure infusion apparatus
BS EN 12811-2:2004 BS EN 12811-2:2004. Temporary works equipment. Information on materials
BS EN 13891:2003 BS EN 13891:2003. Tensional strapping. Guide to selection and use of tensional strapping
BS EN ISO 13969:2004 BS EN ISO 13969:2004. Milk and milk products. Guidelines for a standardized description of microbial inhibitor tests
BS ISO 16200-1:2001 BS ISO 16200-1:2001. Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Pumped sampling method
BS EN 3475-408:2005 BS EN 3475-408:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Fire resistance
BS 4676:2005 BS 4676:2005. Protective clothing. Footwear and gaiters for use in molten metal foundries. Requirements and test methods
BS ISO 16000-4:2004 BS ISO 16000-4:2004. Indoor air. Determination of formaldehyde. Diffusive sampling method
BS ISO 16703:2004 BS ISO 16703:2004. Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
BS EN ISO 16665:2005, BS 6068-5.38:2005 BS EN ISO 16665:2005, BS 6068-5.38:2005. Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macro-fauna
BS EN 12927-6:2004 BS EN 12927-6:2004. Safety requirements for cableway installations designed to carry persons. Ropes. Discard criteria
BS EN 12927-2:2004 BS EN 12927-2:2004. Safety requirements for cableway installations designed to carry persons. Ropes. Safety factors
BS EN 13693:2004 BS EN 13693:2004. Precast concrete products. Special roof elements
BS EN ISO 15614-2:2005 BS EN ISO 15614-2:2005. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc welding of aluminium and its alloys
BS EN ISO 15609-1:2004 BS EN ISO 15609-1:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding
BS EN ISO 9606-2:2004 BS EN ISO 9606-2:2004. Qualification test of welders. Fusion welding. Aluminium and aluminium alloys
BS EN 10226-2:2005 BS EN 10226-2:2005. Pipe threads where pressure tight joints are made on the threads. Taper external threads and taper internal threads. Dimensions, tolerances and designation
PD ISO/IEC Guide 67:2004 PD ISO/IEC Guide 67:2004. Conformity asessment. Fundamentals of product certification
BS ISO 15202-2:2001 BS ISO 15202-2:2001. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample preparation
BS EN 10025-1:2004 BS EN 10025-1:2004. Hot rolled products of structural steels. General technical delivery conditions
BS EN 1759-1:2004 BS EN 1759-1:2004. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated. Steel flanges, NPS 1/2 to 24
BS EN 10217-7:2005 BS EN 10217-7:2005. Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
DD CEN/TS 54-14:2004 DD CEN/TS 54-14:2004. Fire detection and fire alarm systems. Guidelines for planning, design, installation, commissioning, use and maintenance
BS EN 54-13:2005 BS EN 54-13:2005. Fire detection and fire alarm systems. Compatibility assessment of system components
BS EN 806-2:2005 BS EN 806-2:2005. Specifications for installations inside buildings conveying water for human consumption. Design
BS EN 458:2004 BS EN 458:2004. Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document
BS ISO 17126:2005 BS ISO 17126:2005. Soil quality. Determination of the effects of pollutants on soil flora. Screening test for emergence of lettuce seedlings (Lactuca sativa L.)
BS EN 13684:2004 BS EN 13684:2004. Garden equipment. Pedestrian controlled aerators and scarifiers. Safety
BS EN 61121:2005 BS EN 61121:2005. Tumble dryers for household use. Methods for measuring the performance
DD CEN/TS 14159:2004 DD CEN/TS 14159:2004. Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
BS ISO 16656:2004 BS ISO 16656:2004. Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions
BS EN 12195-4:2003 BS EN 12195-4:2003. Load restraint assemblies on road vehicles. Safety.Lashing steel wire ropes
BS EN 12195-1:2003 BS EN 12195-1:2003. Load restraint assemblies on road vehicles. Safety. Calculation of lashing forces
BS EN 10311:2005 BS EN 10311:2005. Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
BS EN 13653:2004 BS EN 13653:2004. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of shear strength
BS EN ISO 15788-2:2004 BS EN ISO 15788-2:2004. Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils. Method using high-performance liquid chromatography (HPLC)
BS EN ISO 13903:2005 BS EN ISO 13903:2005. Animal feeding stuffs. Determination of amino acids content
BS EN 13584:2003 BS EN 13584:2003. Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products
BS 6262-2:2005 BS 6262-2:2005. Glazing for buildings. Code of practice for energy, light and sound
BS 6262-3:2005 BS 6262-3:2005. Glazing for buildings. Code of practice for fire, security and wind loading
BS 6262-6:2005 BS 6262-6:2005. Glazing for buildings. Code of practice for special applications
BS 6262-4:2005 BS 6262-4:2005. Glazing for buildings. Code of practice for safety related to human impact
ISO148-1 : 2006 EDTN1 ISO148-1 : 2006 EDTN1. ISO 148-1 Metallic materials - Charpy pendulum impact test. Test method
ISO129-1 : 2004 EDTN1 ISO129-1 : 2004 EDTN1. ISO129-1 : 2004 Technical drawings - Technical drawings - Indication of dimensions and tolerances -. Part 1: General principles
WD/ISO1893 : 2005 EDTN 2 WD/ISO1893 : 2005 EDTN 2. ISO1893 : 2005 Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature
BS EN 61158-6:2004 BS EN 61158-6:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Application layer protocol specification
BS EN 61158-5:2004 BS EN 61158-5:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Application layer service definition
ISO1703 : 2005 EDTN3 ISO1703 : 2005 EDTN3. ISO1703 : 2005 Assembly tools for screws and nuts - Nomenclature
BS 7935-1:2004 BS 7935-1:2004. Constant amplitude dynamic force calibration. Calibration and verification of non-resonant uniaxial dynamic testing systems. Method
BS 6121-1:2005 BS 6121-1:2005. Mechanical cable glands. Armour glands. Requirements and test methods
BS EN 4434:2005 BS EN 4434:2005. Aerospace series. Copper or copper alloy lightweight conductors for electrical cables. Product standard (normal and tight tolerances)
ISO11264 : 2005 EDTN1 ISO11264 : 2005 EDTN1. ISO11264 : 2005 Soil quality - Determination of herbicides - Method using HPLC with UV-detection
05/19993827 DC 05/19993827 DC. BS EN 3120. Aerospace series. Titanium alloy TI-P64003. Cold worked and stress relieved. Seamless tube for pressure systems - 4mm ≤ D ≤ 50mm 690 MPa ≤ Rm ≤ 1030 MPa
BS EN 61158-3:2004 BS EN 61158-3:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Data link service definition
BS EN 61158-4:2004 BS EN 61158-4:2004. Fieldbus standard for use in industrial control systems. Data link protocol specification
WD/ISO3522 : 2006 EDTN3 WD/ISO3522 : 2006 EDTN3. ISO3522 : 2006 Cast aluminium and aluminium alloys. Chemical composition and mechanical properties
ISO10381-5 : 2005 EDTN1 ISO10381-5 : 2005 EDTN1. ISO10381-5 : 2005 Soil quality - Sampling. Part 5: Guidance on the procedure for the investigation of urban and industrial sites
DC04/19993047 DC04/19993047. BS EN15501 Cranes - Bridge and gantry cranes
DD CEN/TS 15122:2005 DD CEN/TS 15122:2005. Surfaces for sports areas. Determination of resistance of synthetic sports surfaces to repeated impact
ISO139 : 2005 EDTN2 ISO139 : 2005 EDTN2. ISO139 : 2005 Guidelines for the selection of quality management system consultants and use of their services
DD CEN/TS 12666-2:2005 DD CEN/TS 12666-2:2005. Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity
PD CEN/TR 15135:2005 PD CEN/TR 15135:2005. Welding. Design and non-destructive testing of welds
BS 6262-1:2005 BS 6262-1:2005. Glazing for buildings. General methodology for the selection of glazing
BS 6262-7:2005 BS 6262-7:2005. Glazing for buildings. Code of practice for the provision of information
EN13852-1 CORR1 (12/04) EN13852-1 CORR1 (12/04). EN13852-1 : 2004 Cranes - Offshore cranes -. Part 1: General - purpose offshore cranes
BS EN 13779:2004 BS EN 13779:2004. Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
BS EN ISO 3095:2005 BS EN ISO 3095:2005. Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles
BS EN ISO 3381:2005 BS EN ISO 3381:2005. Railway applications. Acoustics. Measurement of noise inside railbound vehicles
BS 7906-1:2005 BS 7906-1:2005. Use of lifting equipment for performance, broadcast and similar applications. Code of practice for installation, use and removal of above stage equipment (excluding trusses and towers)
05/19988811 DC 05/19988811 DC. BS EN 15258. Precast concrete products. Retaining wall elements
ISO/IEC13818-4 : 2004 EDTN2 ISO/IEC13818-4 : 2004 EDTN2. ISO/IEC13818-4 : 2004 Information technology - Generic coding of moving pictures and associated audio information - . Part 4. Conformance testing
BS ISO 3601-3:2005 BS ISO 3601-3:2005. Fluid power systems. O-rings. Quality acceptance criteria
ISO11873 : 2005 EDTN1 ISO11873 : 2005 EDTN1. ISO11873 : 2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
BS EN 2591-100:2005 BS EN 2591-100:2005. Aerospace series. Elements of electrical and optical connection. Test methods. General
WD/BSISO14560 : 2004 WD/BSISO14560 : 2004. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
BS EN ISO 8442-5:2004 BS EN ISO 8442-5:2004. Materials and articles in contact with foodstuffs. Cutlery and holloware. Specification for sharpness and edge retention test of cutlery
BS ISO 14154:2005 BS ISO 14154:2005. Soil quality. Determination of some selected chlorophenols. Gas-chromatographic method with electron-capture detection
BS 8432:2005 BS 8432:2005. Spinal orthoses. Guide to design
ISO14131 : 2005 EDTN1 (R08) ISO14131 : 2005 EDTN1 (R08). ISO14131 : 2005 Agricultural sprayers - Boom steadiness - Test methods
04/19986707 DC 04/19986707 DC. BS EN 1804-4. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 4. Electro-hydraulic control systems
06/19985925 DC 06/19985925 DC. BS ISO 5492. Sensory analysis. Vocabulary
BS EN 40-2:2004 BS EN 40-2:2004. Lighting columns. General requirements and dimensions
BS EN 14316-1:2004 BS EN 14316-1:2004. Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products. Specification for bonded and loose-fill products before installation
BS EN 14317-1:2004 BS EN 14317-1:2004. Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Specification for bonded and loose-fill products before installation
05/19985193 DC 05/19985193 DC. ISO 10303-221. Industrial automation systems and integration. Product data representation and exchange. Part 221. Application protocol: functional data and their schematic representation for process plant
ISO15172 : 2005 EDTN1 ISO15172 : 2005 EDTN1. ISO15172 : 2005 Road vehicles - Wheels - Nut seat strength test
ISO15322 : 2005 EDTN 1 ISO15322 : 2005 EDTN 1. ISO15322 : 2005 Dried milk and dried milk products - Determination of their behaviour in hot coffee (Coffee test)
ISO14256-2 : 2005 (R08) EDTN1 ISO14256-2 : 2005 (R08) EDTN1. ISO14256-2 : 2005 Soil quality - Determination of nitrate, nitrite and ammonium in field moist soils by extraction with potassium chloride solution -. Part 2: Automatic method with segmented flow analysis
ISO/TS19103 : 2005 EDTN1 ISO/TS19103 : 2005 EDTN1. ISO/TS19103 : 2005 Geographic information - Conceptual schema language
DD CEN/TS 14383-3:2005 DD CEN/TS 14383-3:2005. Prevention of crime. Urban planning and building design. Dwellings
DD CEN/TS 14383-4:2006 DD CEN/TS 14383-4:2006. Prevention of crime. Urban planning and design. Shops and offices
BS EN 196-1:2005 BS EN 196-1:2005. Methods of testing cement. Determination of strength
BS EN 196-2:2005 BS EN 196-2:2005. Methods of testing cement. Chemical analysis of cement
BS EN 196-3:2005 BS EN 196-3:2005. Methods of testing cement. Determination of setting time and soundness
BS EN 196-5:2005 BS EN 196-5:2005. Methods of testing cement. Pozzolanicity test for pozzolanic cements
BS EN ISO 15883-1:2006 BS EN ISO 15883-1:2006. Washer-disinfectors. General requirements, terms and definitions and tests
BS EN ISO 15883-2:2006 BS EN ISO 15883-2:2006. Washer-disinfectors. Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
BS EN ISO 15883-3:2006 BS EN ISO 15883-3:2006. Washer-disinfectors. Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers
BS EN 13721:2004 BS EN 13721:2004. Furniture. Assessment of the surface reflectance
ISO6182-9 : 2005 EDTN1 ISO6182-9 : 2005 EDTN1. ISO6182-9 : 2005 Fire protection - Automatic sprinkler system. Part 9: Requirements and test methods for water mist nozzles
ISO/TS17261 : 2005 EDTN1 ISO/TS17261 : 2005 EDTN1. ISO/TS17261 : 2005 Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goodS transport architecture and terminology
05/19982631 DC 05/19982631 DC. BS ISO 9150. Protective clothing. Determination of behaviour of materials on impact of small splashes of molten metal
06/19981525 DC 06/19981525 DC. ISO 12574-2. Thermal insulation. Cellulose-fibre loose fill forhorizonta l applications in ventilated roof spaces. Part 2. Principalresponsibilit ies of installers
ISO407 : 2004 EDTN3 ISO407 : 2004 EDTN3. ISO407 : 2004 Small medical gas cylinders - Pin-index yoke-type valve connections
BS EN 61076-3-100:2000 BS EN 61076-3-100:2000. Connectors for use in d.c., low-frequency analogue and digital high-speed data applications. Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
BS 7935-2:2004 BS 7935-2:2004. Constant amplitude force calibration. Calibration of the calibration device instrumentation to be used for the dynamic calibration of non-resonant uniaxial dynamic testing systems. Method
ISO16038 : 2005 EDTN1 ISO16038 : 2005 EDTN1. ISO16038 : 2005 Latex rubber condoms - Guidance on use of ISO 4074 in the quality management of natural rubber latex condoms
BS ISO/TS 13399-2:2005 BS ISO/TS 13399-2:2005. Cutting tool data representation and exchange. Reference dictionary for the cutting items
BS EN ISO 15867:2003 BS EN ISO 15867:2003. Intermediate bulk containers (IBCs) for non-dangerous goods. Terminology
ISO3053 : 2004 (EDTN2) HEADER ISO3053 : 2004 (EDTN2) HEADER. ISO3053 : 2004 Oil of grapefruit (citrus X paradisi Macfad.)obtained by expression
ISO16143-2 : 2004 EDTN1 ISO16143-2 : 2004 EDTN1. ISO16143-2 : 2004 Stainless steels for general purposes -. Part 2: Semi-finished products, bars, rods and sections
ISO16024 : 2005 EDTN1 ISO16024 : 2005 EDTN1. ISO16024 : 2005 Personal protective equipment for protection against falls from a height - Horizontal lifelines
05/19978685 DC 05/19978685 DC. BS EN 74-3. Couplers, spigot pins and base plates for use in falsework and scaffolds. Part 3. Plain base plates and spigot pins. Requirements and test methods
PD ISO/IEC TR 15443-1:2005 PD ISO/IEC TR 15443-1:2005. Information technology. Security techniques. A framework for IT security assurance. Overview and framework
DD ISO/TS 14798:2006 DD ISO/TS 14798:2006. Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
PD ISO/TR 14799-1:2005 PD ISO/TR 14799-1:2005. Comparison of worldwide escalator and moving walk safety standards. Rule by rule comparison
ISO14518 : 2005 EDTN1 ISO14518 : 2005 EDTN1. ISO14518-1 : 2005 Cranes - Procedures for test loads
ISO14657 : 2005 EDTN1 ISO14657 : 2005 EDTN1. ISO14657 : 2005 Zinc-coated steel for the reinforcement of conrete
05/19976767 DC 05/19976767 DC. BS ISO 11783-10. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 10. Task controller and management information system data interchange
PD CEN/TR 13201-1:2004 PD CEN/TR 13201-1:2004. Road lighting. Selection of lighting classes
ISO16720 : 2005 EDTN1 ISO16720 : 2005 EDTN1. ISO16720 : 2005 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
ISO15765-2 : 2004 EDTN1 ISO15765-2 : 2004 EDTN1. ISO15765-2 : 2004 Road vehicles - Diagnostics on Controller Area Networks (CAN) -. Part 2: Network layer services
ISO15765-3 : 2004 EDTN1 ISO15765-3 : 2004 EDTN1. ISO15765-3 : 2004 Road vehicles - Diagnostics on Controller Area Networks (CAN) -. Part 3: Implementation of unified diagnostic services (UDS on CAN)
ISO15765-4 : 2005 EDTN1 ISO15765-4 : 2005 EDTN1. ISO15765-4 : 2005 Road vehicles - Diagnostics on Controller Area Networks (CAN) -. Part 4: Requirements for emission-related systems
06/19976237 DC 06/19976237 DC. BS ISO 16840-4. Wheelchair seating. Part 4. Seating devices for use in motor vehicles
BS 8213-1:2004 BS 8213-1:2004. Windows doors and rooflights. Design for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice
05/19975833 DC 05/19975833 DC. BS ISO 16001. Earth-moving machinery. Hazard detection systems and visual aids. Performance requirements and tests
BS EN 61959:2004 BS EN 61959:2004. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries
BS 5864:2004 BS 5864:2004. Installation and maintenance of gas-fired ducted air heaters of rated input not exceeding 70 kW net (2nd and 3rd family gases). Specification
BS 6896:2005 BS 6896:2005. Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS EN ISO 16467:2003 BS EN ISO 16467:2003. Packaging. Transport packaging for dangerous goods. Test methods for IBCs
BS EN ISO 16106:2006 BS EN ISO 16106:2006. Packaging. Transport packages for dangerous goods. Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. Guidelines for the application of ISO 9001
BS ISO 15552:2004 BS ISO 15552:2004. Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa 10 bar series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions
BS ISO 17559:2003 BS ISO 17559:2003. Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
ISO11407 : 2004 EDTN2 ISO11407 : 2004 EDTN2. ISO11407 : 2004 Commercial road vehicles - Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers - Interchangeabilty
BS 7971-10:2004 BS 7971-10:2004. Protective clothing and equipment for use in violent situations and in training. Coveralls. Requirements and test methods
BS 7971-5:2004 BS 7971-5:2004. Protective clothing and equipment for use in violent situations and in training. Footwear. Requirements and test methods
PD CEN/TR 13695-2:2004 PD CEN/TR 13695-2:2004. Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment. Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment
ISO11452-2 : 2004 EDTN2 ISO11452-2 : 2004 EDTN2. ISO11452-2 : 2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -. Part 2: Absorber-lined shielded enclosure
BS EN 413-1:2004 BS EN 413-1:2004. Masonry cement. Composition, specifications and conformity criteria
BS EN ISO 15006:2004 BS EN ISO 15006:2004. Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and compliance procedures for in-vehicle auditory presentation
BS ISO 13765-1:2004 BS ISO 13765-1:2004. Refractory mortars. Determination of consistency using the penetrating cone method
BS EN 50290-1-2:2004 BS EN 50290-1-2:2004. Communication cables. Definitions
BS ISO 13765-2:2004 BS ISO 13765-2:2004. Refractory mortars. Determination of consistency using the reciprocating flow table method
BS EN 50290-2-1:2005 BS EN 50290-2-1:2005. Communication cables. Common design rules and construction
BS ISO 13765-3:2004 BS ISO 13765-3:2004. Refractory mortars. Determination of joint stability
BS ISO 13765-4:2004 BS ISO 13765-4:2004. Refractory mortars. Determination of flexural bonding strength
BS ISO 13765-5:2004 BS ISO 13765-5:2004. Refractory mortars. Determination of grain size distribution (sieve analysis)
BS ISO 13765-6:2004 BS ISO 13765-6:2004. Refractory mortars. Determination of the moisture content of ready-mixed mortars
ISO6182-10 : 2006 EDTN1 ISO6182-10 : 2006 EDTN1. ISO6182-10 : 2006 Fire protection - Automatic sprinkler systems. Part 10: Requirements and test methods for domestic sprinklers
ISO3864-2 : 2004 (R08) EDTN1 ISO3864-2 : 2004 (R08) EDTN1. ISO3864-3 : 2004 Graphical symbols - Safety colours and safety signs -. Part 2: Design principles for product safety labels
PD CEN ISO/TR 17844:2004 PD CEN ISO/TR 17844:2004. Welding. Comparison of standardised methods for the avoidance of cold cracks
ISO7195 : 2005 EDTN2 ISO7195 : 2005 EDTN2. ISO7195 : 2005 Nuclear energy - Packaging of uranium hexafluoride (UF6 for transport
ISO14323 : 2006 EDTN1 ISO14323 : 2006 EDTN1. ISO14323 : 2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
04/19969165 DC 04/19969165 DC. BS EN 12259-9. Fixed firefighting systems. Components for sprinkler and water spray systems. Part 9. Deluge alarm valve assemblies


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment