2009/09/09

Cheapest & Latest JIS Standard (PDF) (2)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


JSA ICS 19, Testing
IS C 60695-1-3:1993
Fire hazard testing Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products Guidance for use preselection procedures (FOREIGN STANDARD)
JIS B 7721:2002
Verification and calibration of the force measuring system of the tension/compression testing machines (FOREIGN STANDARD)
JIS B 7728:2002
Calibration of force-proving instruments used for the verification of uniaxial testing machines (FOREIGN STANDARD)
JIS B 7739:1989
Pendulum-type impact testing machines for non-metallic materials (FOREIGN STANDARD)
JIS B 7751:2007
Light-exposure and light-and-water-exposure apparatus (Enclosed carbon-arc type) (FOREIGN STANDARD)
JIS B 7754:1991
Light-exposure and light-and-water-exposure apparatus (xenon-arc lamp type) (FOREIGN STANDARD)
JIS B 7757:1995
Forced air circulation oven type thermal accelerated aging testers (FOREIGN STANDARD)
JIS B 9921:1997
Light scattering automatic particle counter (FOREIGN STANDARD)
JIS B 9924:1990
Surface particle counters (FOREIGN STANDARD)
JIS B 9925:1997
Light scattering automatic particle counter for liquid (FOREIGN STANDARD)
JIS C 0025:1988
Basic environmental testing procedures Part 2: Tests Test N: Change of temperature (FOREIGN STANDARD)
JIS C 0046:1993
Environmental testing Part 2: Test methods Test Eg: Impact, spring hammer (FOREIGN STANDARD)
JIS C 0099:2005
Environmental testing: Tests -- Test: Test methods for solderability of surface mounting devices (SMD) by wetting balance using lead-free solder paste (FOREIGN STANDARD)
JIS C 1010-2-32:2006
Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-32: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (FOREIGN STANDARD)
JIS C 2136:2004
Test method for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions (FOREIGN STANDARD)
JIS C 3005:2000
Test methods for rubber or plastic insulated wires and cables (FOREIGN STANDARD)
JIS C 60068-1:1993
Environmental testing Part 1: General and guidance (FOREIGN STANDARD)
JIS C 60068-2-1:1995
Environmental testing procedures Part 2: Tests, Tests A: Cold (FOREIGN STANDARD)
JIS C 60068-2-11:1989
Basic environmental testing procedures Part 2: Tests -- Test Ka: Salt mist (FOREIGN STANDARD)
JIS C 60068-2-13:1989
Basic environmental testing procedures Part 2: Tests, Test M: Low air pressure (FOREIGN STANDARD)
JIS C 60068-2-17:2001
Basic environmental testing procedures -- Part 2: Tests -- Test Q: Sealing (FOREIGN STANDARD)
JIS C 60068-2-18:2007
Environmental testing -- Part 2-18: Tests -- Test R and guidance: Water (FOREIGN STANDARD)
JIS C 60068-2-2:1995
Basic environmental testing procedures Part 2: Tests, Test B: Dry heat (FOREIGN STANDARD)
JIS C 60068-2-20:1996
Basic environmental testing procedures Part 2: Tests. Test T: Soldering (FOREIGN STANDARD)
JIS C 60068-2-27:1995
Basic environmental testing procedures Part 2: Tests, Test Ea and guidance: Shock (FOREIGN STANDARD)
JIS C 60068-2-29:1995
Basic environmental testing procedures Part 2: Tests Test Eb and guidance: Bump (FOREIGN STANDARD)
JIS C 60068-2-30:1988
Basic environmental testing procedures Part 2: Tests Test Db: Damp heat, cyclic (12 + 12-Hour cycle) (FOREIGN STANDARD)
JIS C 60068-2-31:1995
Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens (FOREIGN STANDARD)
JIS C 60068-2-32:1995
Environmental testing Part 2: Tests. Test Ed: Free fall (FOREIGN STANDARD)
JIS C 60068-2-38:1988
Basic environmental testing procedures Part 2: Tests Test Z/AD: Composite temperature/humidity cyclic test (FOREIGN STANDARD)
JIS C 60068-2-40:1995
Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests (FOREIGN STANDARD)
JIS C 60068-2-41:1995
Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests (FOREIGN STANDARD)
JIS C 60068-2-42:1993
Basic environmental testing procedures Part 2: Tests Test Kc: Sulphur dioxide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-43:1993
Basic environmental testing procedures Part 2: Tests Test Kd: Hydrogen sulphide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-45:1995
Environmental testing procedures of electronic and electrical resistance to solvents (immersion in cleaning solvents) (FOREIGN STANDARD)
JIS C 60068-2-46:1993
Basic environmental testing procedures Part 2: Tests Guidance to Test Kd: Hydrogen sulphide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-47:2008
Environmental testing -- Part 2-47: Tests -- Mounting of specimens for vibration, impact and similar dynamic tests (Foreign Standard)
JIS C 60068-2-49:1993
Basic environmental testing procedures Part 2: Tests Guidance to Test Kc: Sulphur dioxide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-50:1997
Basic environmental testing procedures Part 2: Tests Tests Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (FOREIGN STANDARD)
JIS C 60068-2-51:1997
Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (FOREIGN STANDARD)
JIS C 60068-2-52:2000
Environmental testing -- Part 2: Tests -- Test Kb: Salt mist, cyclic (sodium, chloride solution) (FOREIGN STANDARD)
JIS C 60068-2-53:1997
Basic environmental testing procedures Part 2: Tests Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests (FOREIGN STANDARD)
JIS C 60068-2-54:1996
Environmental testing Part 2: tests. Test Ta: Soldering. Solderability testing by the wetting balance method (FOREIGN STANDARD)
JIS C 60068-2-6:1999
Environmental testing Part 2: Tests -- Test Fc: Vibration (sinusoidal) (FOREIGN STANDARD)
JIS C 60068-2-60:1999
Environmental testing -- Part 2: Tests -- Test Ke: Flowing mixed gas corrosion test (FOREIGN STANDARD)
JIS C 60068-2-61:1996
Environmental testing Part 2: Test methods Test Z/ABDM: Climatic sequence (FOREIGN STANDARD)
JIS C 60068-2-64:1997
Environmental testing Part 2: Test methods -- Test Fh: Vibration, broad-band random (digital control) and guidance (FOREIGN STANDARD)
JIS C 60068-2-66:2001
Environmental testing -- Part 2: Test methods -- Test Cx: Damp heat, steady state (unsaturated pressurized vapour) (FOREIGN STANDARD)
JIS C 60068-2-67:2001
Environmental testing -- Part 2: Tests -- Test Cy: Damp heat, steady state, accelerated test primarily intended for components (FOREIGN STANDARD)
JIS C 60068-2-7:1993
Basic environmental testing procedures Part 2: Tests -- Test Ga and guidance: Acceleration, steady state (FOREIGN STANDARD)
JIS C 60068-2-70:2007
Environmental testing -- Part 2: Tests -- Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (FOREIGN STANDARD)
JIS C 60068-2-78:2004
Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state (FOREIGN STANDARD)
JIS C 60068-2-81:2007
Environmental testing -- Part 2-81: Shock -- Shock response spectrum synthesis (FOREIGN STANDARD)
JIS C 60068-3-1:1995
Background information, Section One -- Cold and dry heat tests (FOREIGN STANDARD)
JIS C 60068-3-3:2000
Environmental testing -- Part 3: Guidance Seismic test method for equipments (FOREIGN STANDARD)
JIS C 60355:1993
An appraisal of the problems of accelerated testing for atmospheric corrosion (FOREIGN STANDARD)
JIS C 60695-10-2:2008
Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test (Foreign Standard)
JIS C 60695-1-1:2000
Fire hazard testing -- Part 1: Guidance for assessing fire hazard of electrotechnical products -- Section 1: General guidance (FOREIGN STANDARD)
JIS C 60695-1-2:1993
Fire hazard testing Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electerotechnical products Guidance for electronic components (FOREIGN STANDARD)
JIS C 60695-2-3:1987
Fire hazard testing Part 2: Test methods bad-connection test with heaters (FOREIGN STANDARD)
JIS C 60695-2-4-0:1995
Fire hazard testing Part 2: Test methods -- Section 4/sheet 0: Diffusion type and premixed type flame test methods (FOREIGN STANDARD)
JIS C 60695-5-1:1996
Fire hazard testing Part 5: Assessment of potential corrosion damage by fire effluent -- Section 1: General guidance (FOREIGN STANDARD)
JIS C 60695-5-2:1999
Fire hazard testing -- Part 5: Assessment of potential corrosion damage by fire effluent -- Section 2: Guidance on the selection and use of test methods (FOREIGN STANDARD)
JIS C 60695-7-1:1997
Fire hazard testing Part 7: Guidance on the minimization of toxic hazards due to fires involving electrotechnical products Section 1: General (FOREIGN STANDARD)
JIS C 60721-2-1:1995
Classification of environmental conditions Part 2: Environmental conditions appearing in nature Temperature and humidity (FOREIGN STANDARD)
JIS C 60721-2-2:1996
Classification of environmental conditions Part 2: Environmental conditions appearing in nature. Precipitation and wind (FOREIGN STANDARD)
JIS C 60721-2-3:1997
Classification of environmental conditions Part 2: Environmental conditions appearing in nature Air pressure (FOREIGN STANDARD)
JIS C 60721-2-4:1999
Classification of environmental conditions -- Part 2: Environmental conditions appearing in nature. Solar radiation and temperature (FOREIGN STANDARD)
JIS C 60721-3-0:1995
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Introduction (FOREIGN STANDARD)
JIS C 60721-3-3:1997
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weatherprotected locations (FOREIGN STANDARD)
JIS C 60721-3-4:1997
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 4: Stationary use at non-weatherprotected locations (FOREIGN STANDARD)
JIS C 60721-3-7:1999
Classification of environmental conditions -- Part 3: Classification of groups of environmental parameters and their severities. Section 7: Portable and non-stationary use (FOREIGN STANDARD)
JIS C 60721-3-9:2000
Classification of environmental conditions -- Part 3: Classification of groups of environmental parameters and their severities -- Section 9: Microclimates inside products (FOREIGN STANDARD)
JIS G 0585:2002
Radiographic inspection for steel castings (FOREIGN STANDARD)
JIS G 3556:2002
Industrial woven wire cloth (FOREIGN STANDARD)
JIS H 7803:2005
General rules for the determination of particle size and crystallite size in metal catalysts (FOREIGN STANDARD)
JIS H 8667:2002
Test methods for cermet sprayed coatings (FOREIGN STANDARD)
JIS L 0854:2001
Test method for colour fastness to transfer of dye (FOREIGN STANDARD)
JIS Z 2252:1991
Test methods for Vickers hardness at elevated temperatures (FOREIGN STANDARD)
JIS Z 2255:2003
Method for ultra-low loaded hardness test (FOREIGN STANDARD)
JIS Z 2314:1991
Test methods for performance characteristics of eddy current testing instruments (FOREIGN STANDARD)
JIS Z 2315:1991
Test methods for performance characteristics of eddy current flaw detecting system (FOREIGN STANDARD)
JIS Z 2319:1991
Methods for magnetic leakage flux testing (FOREIGN STANDARD)
JIS Z 2320-1:2007
Non-destructive testing -- Magnetic particle testing -- Part 1: General principles (FOREIGN STANDARD)
JIS Z 2320-2:2007
Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media (FOREIGN STANDARD)
JIS Z 2320-3:2007
Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment (FOREIGN STANDARD)
JIS Z 2321:1993
AC yoke magnet for magnetic particle testing (FOREIGN STANDARD)
JIS Z 2329:2002
Methods for bubble leak testing (FOREIGN STANDARD)
JIS Z 2330:1992
Standard recommended guide for the selection of helium leak testing (FOREIGN STANDARD)
JIS Z 2331:2006
Method for helium leak testing (FOREIGN STANDARD)
JIS Z 2332:1993
Test method for leaks using the pressure change measurement (FOREIGN STANDARD)
JIS Z 2333:2005
Test method for leaks using ammonia gas (FOREIGN STANDARD)
JIS Z 2340:2002
Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing (FOREIGN STANDARD)
JIS Z 2343-1:2001
Non-destructive testing -- Penetrant testing -- Part 1: General principles -- Method for liquid penetrant testing and classification of the penetrant indication (FOREIGN STANDARD)
JIS Z 2343-2:2001
Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials (FOREIGN STANDARD)
JIS Z 2343-3:2001
Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks (FOREIGN STANDARD)
JIS Z 2343-4:2001
Non-destructive testing -- Penetrant testing -- Part 4: Equipment (FOREIGN STANDARD)
JIS Z 2345:2000
Standard test blocks for ultrasonic testing (FOREIGN STANDARD)
JIS Z 2350:2002
Method for measurement of performance characteristics of ultrasonic probes (FOREIGN STANDARD)
JIS Z 2351:1992
Method for assessing the electrical characteristics of ultrasonic testing instrument using pulse echo technique (FOREIGN STANDARD)
JIS Z 2352:1992
Method for assessing the overall performance characteristics of ultrasonic pulse echo testing instrument (FOREIGN STANDARD)
JIS Z 2354:1992
Method for measurement of ultrasonic attenuation coefficient of solid by pulse echo technique (FOREIGN STANDARD)
JIS Z 2355:2005
Methods for measurement of thickness by ultrasonic pulse echo technique (FOREIGN STANDARD)
JIS Z 2356:2006
Method of automatic ultrasonic inspection for graphite ingot (FOREIGN STANDARD)
JIS Z 2381:2001
General requirements for atmospheric exposure test (FOREIGN STANDARD)
JIS Z 3060:2002
Method for ultrasonic examination for welds of ferritic steel (FOREIGN STANDARD)
JIS Z 3105:2003
Methods of radiographic examination for welded joints in aluminium (FOREIGN STANDARD)
JIS Z 4560:1991
Industrial gamma-ray apparatus for radiography (FOREIGN STANDARD)
JIS Z 4561:1992
Viewing illuminators for industrial radiograph (FOREIGN STANDARD)
JIS Z 4606:2007
Industrial X-ray apparatus for radiographic testing (FOREIGN STANDARD)
JIS Z 4614:1993
Source container of measuring instrument utilizing ionizing radiation (FOREIGN STANDARD)
JIS Z 8703:1983
Standard atmospheric conditions for testing (FOREIGN STANDARD)
JIS Z 8801-1:2006
Test sieves -- Part 1: Test sieves of metal wire cloth (FOREIGN STANDARD)
JIS Z 8801-2:2000
Test sieves -- Part 2: Test sieves of perforated metal plate (FOREIGN STANDARD)
JIS Z 8801-3:2000
Test sieves -- Part 3: Test sieves of electroformed sheets (FOREIGN STANDARD)
JIS Z 8816:2001
Particulate materials -- General requirements for methods of sampling (FOREIGN STANDARD)
JIS Z 8820-2:2004
Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method (FOREIGN STANDARD)
JIS Z 8823-2:2004
Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method (FOREIGN STANDARD)
JIS Z 8841:1993
Granules and agglomerates -- Test methods for strength (FOREIGN STANDARD)
JIS Z 8909-1:2005
Test method of filter media for dust collection Part 1: Filter efficiency (FOREIGN STANDARD)
JIS Z 8909-2:2008
Test method of filter media for dust collection -- Part 2: Test on durability under simulated running conditions (FOREIGN STANDARD)
JIS Z 8909-3:2008
Test method of filter media for dust collection -- Part 3: Test for durability under high temperature (FOREIGN STANDARD)
JIS Z 8910:2007
Test method of filter media for dust collection -- Sampling and test method for fabric filter durability (FOREIGN STANDARD)
JSA ICS 21, Mechanical systems and components for general use
JIS K 6372:1995
Synchronous belts for general power transmission (FOREIGN STANDARD)
Classical V-belts for power transmission (Foreign Standard)
JIS K 6323:2008
Cold-rolled steel strips for springs (FOREIGN STANDARD)
JIS G 4802:2005
JIS G 3104:2004
Steel bars for rivets (FOREIGN STANDARD)
JIS E 1107:2008
Steel bolts and nuts for fish-plates and fastenings (Foreign Standard)
Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid (FOREIGN STANDARD)
JIS D 2610:2005
Grease guns (FOREIGN STANDARD)
JIS B 9808:1991
JIS B 7141:2003
Microscope -- Screw thread for objectives (FOREIGN STANDARD)
Jig bushes and accessories (FOREIGN STANDARD)
JIS B 5201:1998
JIS B 4356:1996/AMENDMENT 1:2009
Pinion type cutters (Amendment 1) (Foreign Standard)
JIS B 4356:1996
Pinion type cutters (FOREIGN STANDARD)
JIS B 4351:1985/AMENDMENT 1:2009
Straight bevel gear generating cutters (Type G) (Amendment 1) (Foreign Standard)
JIS B 4351:1985
Straight bevel gear generating cutters (type G) (FOREIGN STANDARD)
Involute gear milling cutters (Amendment 1) (Foreign Standard)
JIS B 4232:1996/AMENDMENT 1:2009
Involute gear milling cutters (FOREIGN STANDARD)
JIS B 4232:1996
JIS B 2809:1996/AMENDMENT 1:2009
Wire ropes -- Grips for rope or wire strand (Amendment 1) (Foreign Standard)
JIS B 2809:1996
Wire ropes -- Grips for rope or wire strand (FOREIGN STANDARD)
JIS B 2808:2005
Spring pins (FOREIGN STANDARD)
JIS B 2804:2001
Retaining rings (FOREIGN STANDARD)
JIS B 2710-4:2008
Leaf springs -- Part 4: Specification of products (FOREIGN STANDARD)
JIS B 2710-3:2008
Leaf springs -- Part 3: Method of testing (FOREIGN STANDARD)
JIS B 2710-2:2008
Leaf springs -- Part 2: Design method (FOREIGN STANDARD)
JIS B 2710-1:2008
Leaf springs -- Part 1: Terms and definitions (FOREIGN STANDARD)
Helical torsion springs -- Requirements for design, performance test method (FOREIGN STANDARD)
JIS B 2709:2000
Coned disc springs (FOREIGN STANDARD)
JIS B 2706:2001
Helical compression and extension springs -- Requirements for design, performance test method (FOREIGN STANDARD)
JIS B 2704:2000
JIS B 2405:2003
Mechanical seals -- General requirements (FOREIGN STANDARD)
JIS B 2402-5:2002
Rotary shaft lip type seals -- Part 5: Identification of visual imperfections (FOREIGN STANDARD)
JIS B 2402-4:2002
Rotary shaft lip type seals -- Part 4: Performance test procedures (FOREIGN STANDARD)
JIS B 2402-3:2002
Rotary shaft lip type seals -- Part 3: Storage, handling and installation (FOREIGN STANDARD)
JIS B 2402-1:2002
Rotary shaft lip type seals -- Part 1: Nominal dimensions and tolerances (FOREIGN STANDARD)
Belt drives -- Pulleys and V-ribbed belts for industrial applications (FOREIGN STANDARD)
JIS B 1858:2005
Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 2: Pulley (FOREIGN STANDARD)
JIS B 1857-2:2001
Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 1: Belt (FOREIGN STANDARD)
JIS B 1857-1:2001
JIS B 1856:1993
Synchronous belt drives -- Pulleys (FOREIGN STANDARD)
Grooved pulleys for narrow V-belts (FOREIGN STANDARD)
JIS B 1855:1991
Grooved pulleys for classical V-belts (FOREIGN STANDARD)
JIS B 1854:1987
JIS B 1852:1980
Pulleys for flat transmission belts (FOREIGN STANDARD)
Fatigue test method for transmission precision roller chains (Foreign Standard)
JIS B 1811:2008
Guidance on the selection of roller chain drives (FOREIGN STANDARD)
JIS B 1810:1999
Gears -- Surface temper etch inspection after grinding (Foreign Standard)
JIS B 1756:2008
JIS B 1751:1976
Master cylindrical gears (FOREIGN STANDARD)
Dimensions of cylindrical worm gears (FOREIGN STANDARD)
JIS B 1723:1977
JIS B 1706-2:1999
Straight bevel gears for general engineering and heavy engineering Part 2: Modules and diametral pitches (FOREIGN STANDARD)
JIS B 1706-1:1999
Straight bevel gear for general engineering -- Part 1: Basic rack (FOREIGN STANDARD)
Backlashes for bevel gears (FOREIGN STANDARD)
JIS B 1705:1973
Accuracy for bevel gears (FOREIGN STANDARD)
JIS B 1704:1978
Cylindrical gears -- The accuracy -- Part 3: Definitions and allowable values of deviations relevant to corresponding flanks of the gear teeth and radial composite deviations of injection molding plastic gears (Foreign Standard)
JIS B 1702-3:2008
Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information (FOREIGN STANDARD)
JIS B 1702-2:1998
Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth (FOREIGN STANDARD)
JIS B 1702-1:1998
Cylindrical gears for general engineering and for heavy engineering -- Part 2: Modules (FOREIGN STANDARD)
JIS B 1701-2:1999
Cylindrical gears for general and heavy engineering -- Part 1: Standard basic rack tooth profile (FOREIGN STANDARD)
JIS B 1701-1:1999
JIS B 1603:1995
Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection (FOREIGN STANDARD)
JIS B 1601:1996
Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification (FOREIGN STANDARD)
Bushes for journal bearings (FOREIGN STANDARD)
JIS B 1582:1996
JIS B 1566:1989
Mounting dimensions and fits for rolling bearings (FOREIGN STANDARD)
JIS B 1554:2005
Rolling bearings -- Locknuts and locking devices (FOREIGN STANDARD)
JIS B 1552:2005
Rolling bearings -- Adapter assemblies, Adapter sleeves and Withdrawal sleeves (FOREIGN STANDARD)
JIS B 1539:1993
Rolling bearings -- Self-aligning thrust roller bearings (FOREIGN STANDARD)
JIS B 1536-5:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 5: Track rollers (Foreign Standard)
JIS B 1536-4:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 4: Thrust needle roller and cage assemblies, thrust washers (Foreign Standard)
JIS B 1536-3:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 3: Radial needle roller and cage assemblies (Foreign Standard)
JIS B 1536-2:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 2: Drawn cup without inner ring (Foreign Standard)
JIS B 1536-1:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 1: Dimension series 48, 49 and 69 (Foreign Standard)
JIS B 1535:1993
Rolling bearings -- Self-aligning roller bearings (FOREIGN STANDARD)
JIS B 1534:1993
Rolling bearings -- Tapered roller bearings (FOREIGN STANDARD)
JIS B 1533:1993
Rolling bearings -- Cylindrical roller bearings (FOREIGN STANDARD)
JIS B 1532:1993
Rolling bearings -- Thrust ball bearings with flat back faces (FOREIGN STANDARD)
JIS B 1523:1993
Rolling bearings -- Self-aligning ball bearings (FOREIGN STANDARD)
JIS B 1522:1993
Rolling bearings -- Angular contact ball bearings (FOREIGN STANDARD)
JIS B 1521:1993
Rolling bearings -- Deep groove ball bearings (FOREIGN STANDARD)
JIS B 1520:1995
Rolling bearings -- Radial internal clearance (FOREIGN STANDARD)
Dynamic load ratings and rating life for rolling bearings (FOREIGN STANDARD)
JIS B 1518:1992
JIS B 1517:1984
Packaging of rolling bearings (FOREIGN STANDARD)
JIS B 1516:1987
Marking on rolling bearings and packages (FOREIGN STANDARD)
JIS B 1515-2:2006
Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods (FOREIGN STANDARD)
JIS B 1514-3:2006
Rolling bearings -- Tolerances of bearings -- Part 3: Chamfer dimensions -- Maximum values (FOREIGN STANDARD)
JIS B 1514-2:2006
Rolling bearings -- Tolerances of bearings -- Part 2: Thrust bearings (FOREIGN STANDARD)
JIS B 1514-1:2006
Rolling bearings -- Tolerances of bearings -- Part 1: Radial bearings (FOREIGN STANDARD)
JIS B 1513:1995
Rolling bearings -- Designation (FOREIGN STANDARD)
JIS B 1512:2000
Rolling bearings -- Boundary dimensions (FOREIGN STANDARD)
JIS B 1511:1993
Rolling bearings -- General code (FOREIGN STANDARD)
JIS B 1509:2005
Rolling bearings -- Radial bearings with locating snap ring -- Dimensions and tolerances (FOREIGN STANDARD)
JIS B 1506:2005
Rolling bearings -- Rollers (FOREIGN STANDARD)
JIS B 1456:1989/AMENDMENT 1:2009
Roller chain shaft couplings (Amendment 1) (Foreign Standard)
JIS B 1456:1989
Roller chain shaft couplings (FOREIGN STANDARD)
JIS B 1455:1988
Rubber shaft couplings (FOREIGN STANDARD)
JIS B 1454:1988
Universal ball joints (FOREIGN STANDARD)
Geared type shaft couplings (FOREIGN STANDARD)
JIS B 1453:1988
Flexible flanged shaft couplings (FOREIGN STANDARD)
JIS B 1452:1991
JIS B 1451:1991
Rigid flanged shaft couplings (FOREIGN STANDARD)
JIS B 1360:2006
Snap pins (FOREIGN STANDARD)
JIS B 1359:1990
Parallel pins with internal thread (FOREIGN STANDARD)
JIS B 1358:1990
Taper pins with thread (FOREIGN STANDARD)
Dowel pins (parallel pins, hardened) (FOREIGN STANDARD)
JIS B 1355:1990
JIS B 1354:1988
Parallel pins (FOREIGN STANDARD)
JIS B 1353:1990
Taper pins with split (FOREIGN STANDARD)
JIS B 1352:1988
Taper pins (FOREIGN STANDARD)
JIS B 1351:1987
Split pins (FOREIGN STANDARD)
JIS B 1301:1996
Keys and their corresponding keyways (FOREIGN STANDARD)
JIS B 1258:2006
Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A (FOREIGN STANDARD)
JIS B 1257:2004
Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A (FOREIGN STANDARD)
JIS B 1256:2008
Plain washers (Foreign Standard)
JIS B 1251:2001
Spring lock washers (FOREIGN STANDARD)
JIS B 1250:2008
Plain washers for metric bolts, screws and nuts for general purposes -- General plan (FOREIGN STANDARD)
JIS B 1216:2006
Push-on spring nuts (FOREIGN STANDARD)
JIS B 1215:1976
Semi-tubular rivets (FOREIGN STANDARD)
Hot headed rivets (FOREIGN STANDARD)
JIS B 1214:1995
Cold headed rivets (FOREIGN STANDARD)
JIS B 1213:1995
Hexagon weld nuts with flange (FOREIGN STANDARD)
JIS B 1200:2007
JIS B 1199-4:2001
Prevailing torque type nuts -- Part 4: All-metal hexagon nuts with flange (FOREIGN STANDARD)
JIS B 1199-3:2001
Prevailing torque type nuts -- Part 3: Hexagon nuts with flange with non-metallic insert (FOREIGN STANDARD)
JIS B 1199-2:2001
Prevailing torque type nuts -- Part 2: All-metal hexagon nuts (FOREIGN STANDARD)
JIS B 1199-1:2001/AMENDMENT 1:2008
Prevailing torque type nuts -- Part 1: Hexagon nuts with non-metallic insert (Amendment 1) (FOREIGN STANDARD)
JIS B 1199-1:2001
Prevailing torque type nuts -- Part 1: Hexagon nuts with non-metallic insert (FOREIGN STANDARD)
Headed studs (FOREIGN STANDARD)
JIS B 1198:1995
JIS B 1196:2001
Weld nuts (FOREIGN STANDARD)
JIS B 1195:1994
Weld bolts (FOREIGN STANDARD)
Hexagon socket countersunk head screws (FOREIGN STANDARD)
JIS B 1194:2006
Ball splines (FOREIGN STANDARD)
JIS B 1193:2004
Ball screws (FOREIGN STANDARD)
JIS B 1192:1997
Hexagon nuts with flange (FOREIGN STANDARD)
JIS B 1190:2005
Hexagon flange bolts (FOREIGN STANDARD)
JIS B 1189:2005
Cross recessed head screws with captive washer (FOREIGN STANDARD)
JIS B 1188:1995
Hexagon head screws with captive washer (FOREIGN STANDARD)
JIS B 1187:1995
JIS B 1186:1995/AMENDMENT 1:2007
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints (Amendment 1) (FOREIGN STANDARD)
JIS B 1186:1995
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints (FOREIGN STANDARD)
JIS B 1185:1994
Wing nuts (FOREIGN STANDARD)
JIS B 1184:1994
Wing bolts (FOREIGN STANDARD)
Domed cap nuts (FOREIGN STANDARD)
JIS B 1183:2001
JIS B 1182:1995
Square head bolts (FOREIGN STANDARD)
Hexagon nuts and hexagon thin nuts (FOREIGN STANDARD)
JIS B 1181:2004
Hexagon head bolts and hexagon head screws (FOREIGN STANDARD)
JIS B 1180:2004
Flat head bolts (FOREIGN STANDARD)
JIS B 1179:1994
Foundation bolts (FOREIGN STANDARD)
JIS B 1178:1994
Hexagon socket set screws (FOREIGN STANDARD)
JIS B 1177:2007
Hexagon socket head cap screws (FOREIGN STANDARD)
JIS B 1176:2006
Hexagon socket head shoulder screws (FOREIGN STANDARD)
JIS B 1175:1988
Hexagon socket button head screws (FOREIGN STANDARD)
JIS B 1174:2006
JIS B 1173:1995
Studs (FOREIGN STANDARD)
Cup head square neck bolts (FOREIGN STANDARD)
JIS B 1171:2005
Hexagon slotted and castle nuts (FOREIGN STANDARD)
JIS B 1170:2001
Eyenuts (FOREIGN STANDARD)
JIS B 1169:1994
Eyebolts (FOREIGN STANDARD)
JIS B 1168:1994
JIS B 1167:2001
T-Slot nuts (FOREIGN STANDARD)
JIS B 1166:1995
T-Slot bolts (FOREIGN STANDARD)
JIS B 1163:2001
Square nuts (FOREIGN STANDARD)
Hexalobular socket head cap screws (FOREIGN STANDARD)
JIS B 1136:2004
JIS B 1135:1995
Slotted head wood screws (FOREIGN STANDARD)
JIS B 1130:2006
Screw and washer assemblies with plain washers -- Washer hardness classes 200 HV and 300 HV (FOREIGN STANDARD)
JIS B 1129:2004
Tapping screw washer assemblies with plain washers (FOREIGN STANDARD)
Hexalobular socket head tapping screws (FOREIGN STANDARD)
JIS B 1128:2004
Hexagon flange head tapping screws (FOREIGN STANDARD)
JIS B 1127:1995
Hexagon washer hear tapping screws (FOREIGN STANDARD)
JIS B 1126:1995
JIS B 1125:2003
Self drilling tapping screws (FOREIGN STANDARD)
Drilling screws with tapping screw thread (FOREIGN STANDARD)
JIS B 1124:2003
Hexagon head tapping screws (FOREIGN STANDARD)
JIS B 1123:1996
Cross recessed head tapping screws (FOREIGN STANDARD)
JIS B 1122:1996
JIS B 1119:1995
Machine screws and nuts for spectacle frames (FOREIGN STANDARD)
JIS B 1118:1995
Square head set screws (FOREIGN STANDARD)
JIS B 1117:1995
Slotted set screws (FOREIGN STANDARD)
JIS B 1115:1996
Slotted head tapping screws (FOREIGN STANDARD)
Cross-recessed head wood screws (FOREIGN STANDARD)
JIS B 1112:1995
Cross recessed head screws (FOREIGN STANDARD)
JIS B 1111:1996
Hexalobular socket head screws (FOREIGN STANDARD)
JIS B 1107:2004
JIS B 1101:1996
Slotted head screws (FOREIGN STANDARD)
Fasteners -- General requirements for bolts, screws, studs and nuts (FOREIGN STANDARD)
JIS B 1099:2005
Fasteners -- Quality assurance system (FOREIGN STANDARD)
JIS B 1092:2006
Fasteners -- Acceptance inspection (FOREIGN STANDARD)
JIS B 1091:2003
Blind rivets -- Mechanical testing (FOREIGN STANDARD)
JIS B 1087:2004
JIS B 1086:1998
Widening test on nuts (FOREIGN STANDARD)
Cone proof load test on nuts (FOREIGN STANDARD)
JIS B 1085:1995
Fasteners -- Torque/clamp force testing (FOREIGN STANDARD)
JIS B 1084:2007
General rules for tightening of threaded fasteners (Foreign Standard)
JIS B 1083:2008
JIS B 1081:1997
Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results (FOREIGN STANDARD)
JIS B 1071:1985
Method of verification for size and geometry of threaded fasteners (FOREIGN STANDARD)
JIS B 1060:2003
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (FOREIGN STANDARD)
Drilling screws with tapping screw thread -- Mechanical and functional properties (FOREIGN STANDARD)
JIS B 1059:2001
JIS B 1058:1995
Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (FOREIGN STANDARD)
JIS B 1057:2001
Mechanical properties of non-ferrous metal fasteners (FOREIGN STANDARD)
JIS B 1056:2000
Prevailing torque type steel hexagon nuts -- Mechanical and performance properties (FOREIGN STANDARD)
JIS B 1055:1995
Tapping screws -- Mechanical properties (FOREIGN STANDARD)
JIS B 1054-4:2006
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 4: Tapping screws (FOREIGN STANDARD)
JIS B 1054-3:2001
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress (FOREIGN STANDARD)
JIS B 1054-2:2001
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 2: Nuts (FOREIGN STANDARD)
JIS B 1054-1:2001
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 1: Bolts, screw and studs (FOREIGN STANDARD)
JIS B 1053:1999
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses (FOREIGN STANDARD)
JIS B 1052:1998
Mechanical properties of steel nuts (FOREIGN STANDARD)
JIS B 1051:2000
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs (FOREIGN STANDARD)
Fasteners -- Hot dip galvanized coatings (FOREIGN STANDARD)
JIS B 1048:2007
JIS B 1047:2006
Passivation of corrosion-resistant stainless-steel fasteners (FOREIGN STANDARD)
Fasteners -- Non-electrolytically applied zinc flake coatings (FOREIGN STANDARD)
JIS B 1046:2005
Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method (FOREIGN STANDARD)
JIS B 1045:2001
Fasteners -- Electroplated coatings (FOREIGN STANDARD)
JIS B 1044:2001
Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements (FOREIGN STANDARD)
JIS B 1043:1993
Fasteners -- Surface discontinuities -- Part 2: Nuts (FOREIGN STANDARD)
JIS B 1042:1998
Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements (FOREIGN STANDARD)
JIS B 1041:1993
JIS B 1022:2008
Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C (FOREIGN STANDARD)
JIS B 1021:2003
Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C (FOREIGN STANDARD)
Countersinks for countersunk head screws (FOREIGN STANDARD)
JIS B 1017:2008
Gauging of hexagon sockets (FOREIGN STANDARD)
JIS B 1016:2006
Hexalobular internal driving feature for bolts and screws (FOREIGN STANDARD)
JIS B 1015:2008
Countersunk flat head screws -- Part 2: Penetration depth of cross recesses (FOREIGN STANDARD)
JIS B 1014:1994
Countersunk head screws -- Head configuration and gauging (FOREIGN STANDARD)
JIS B 1013:1994
Cross recesses for screws (FOREIGN STANDARD)
JIS B 1012:1985
Centre holes (FOREIGN STANDARD)
JIS B 1011:1987
Designation system for fasteners (FOREIGN STANDARD)
JIS B 1010:2003
Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts (FOREIGN STANDARD)
JIS B 1009:1991
JIS B 1008:1988
Split pin holes and wire holes for bolts, screws and studs (FOREIGN STANDARD)
JIS B 1007:2003
Tapping screws thread (FOREIGN STANDARD)
General purpose bolts and screws -- Metric series -- Radii under the head (FOREIGN STANDARD)
JIS B 1005:2003
Fasteners -- Ends of parts with exterenal ISO metric thread (FOREIGN STANDARD)
JIS B 1003:2003
Dimensions of widths across flats (FOREIGN STANDARD)
JIS B 1002:1985
Diameter of clearance holes and counterbores for bolts and screws (FOREIGN STANDARD)
JIS B 1001:1985
JIS B 0911:2000
Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance (FOREIGN STANDARD)
JIS B 0905:1992
Rotating machines -- Balance quality requirements of rigid rotors (FOREIGN STANDARD)
Conical shaft ends for cone taper ratio 1:10 (FOREIGN STANDARD)
JIS B 0904:2001
Cylindrical shaft ends (FOREIGN STANDARD)
JIS B 0903:2001
Driving and driven machines -- Shaft heights (FOREIGN STANDARD)
JIS B 0902:2001
Diameter of shafts (FOREIGN STANDARD)
JIS B 0901:1977
Edge quality and its grades for material removal parts (FOREIGN STANDARD)
JIS B 0721:2004
JIS B 0271:2004
Three wires for screw thread measuring and four wires for screw thread measuring (FOREIGN STANDARD)
Inspection method for taper screw gauges (FOREIGN STANDARD)
JIS B 0262:1989
JIS B 0261:2004
Parallel screw thread gauges -- Measuring method of gauges (FOREIGN STANDARD)
JIS B 0255:1998/AMENDMENT 1:2008
Limit gauges for unified screw threads (Amendment 1) (FOREIGN STANDARD)
JIS B 0255:1998
Limit gauges for unified screw threads (FOREIGN STANDARD)
JIS B 0254:1985
Screw thread limit gauges for parallel pipe threads (FOREIGN STANDARD)
Gauges for taper pipe threads (FOREIGN STANDARD)
JIS B 0253:1985
Cycle threads (FOREIGN STANDARD)
JIS B 0225:1960
JIS B 0218:1980
Limit of sizes and tolerances for metric trapezoidal screw threads (FOREIGN STANDARD)
JIS B 0217:1980
Tolerance system for metric trapezoidal screw threads (FOREIGN STANDARD)
JIS B 0216:1987
Metric trapezoidal screw threads (FOREIGN STANDARD)
JIS B 0212:1973
Limits of sizes and tolerances for unified fine screw threads (FOREIGN STANDARD)
JIS B 0210:1973
Limits of sizes and tolerances for unified coarse screw threads (FOREIGN STANDARD)
ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (FOREIGN STANDARD)
JIS B 0209-5:2001
ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (FOREIGN STANDARD)
JIS B 0209-4:2001
ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads (FOREIGN STANDARD)
JIS B 0209-3:2001
ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality (FOREIGN STANDARD)
JIS B 0209-2:2001
ISO general purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data (FOREIGN STANDARD)
JIS B 0209-1:2001
JIS B 0208:1973
Unified fine screw threads (FOREIGN STANDARD)
JIS B 0206:1973
Unified coarse screw threads (FOREIGN STANDARD)
ISO general purpose metric screw threads -- Part 4: Basic dimensions (FOREIGN STANDARD)
JIS B 0205-4:2001
ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts (FOREIGN STANDARD)
JIS B 0205-3:2001
ISO general purpose metric screw threads -- Part 2: General plan (FOREIGN STANDARD)
JIS B 0205-2:2001
ISO general purpose metric screw threads -- Part 1: Basic profile (FOREIGN STANDARD)
JIS B 0205-1:2001
JIS B 0203:1999
Taper pipe threads (FOREIGN STANDARD)
JIS B 0202:1999
Parallel pipe threads (FOREIGN STANDARD)
JIS B 0201:1973
Miniature screw threads (FOREIGN STANDARD)
JIS B 0163-2:2007
Plain bearings -- Symbols -- Part 2: Applications (FOREIGN STANDARD)
JIS B 0163-1:2007
Plain bearings -- Symbols -- Part 1: Basic symbols (FOREIGN STANDARD)
Designation system for screw threads (FOREIGN STANDARD)
JIS B 0123:1999
JIS A 5529:1995/AMENDMENT 1:2008
Pins and studs for powder actuated tool (Amendment 1) (FOREIGN STANDARD)
JIS A 5529:1995
Pins and studs for powder actuated tool (FOREIGN STANDARD)
JIS A 5508:2005
Nails (FOREIGN STANDARD)
JSA ICS 23, Fluid systems and components for general use
JIS Z 9102:1987
Identification marking for piping systems (FOREIGN STANDARD)
JIS Z 8753:1989
Measuring methods of low pressures by thermal conductivity gauge (FOREIGN STANDARD)
JIS Z 8752:1989
Measuring methods of low pressures by hot cathode and cold cathode ionization gauges (FOREIGN STANDARD)
JIS S 3022:2003
Oil discharge rubber hoses for oil burning appliances (FOREIGN STANDARD)
JIS S 2145:1991/AMENDMENT 2:2009
Metallic flexible hoses for gas (Amendment 2) (Foreign Standard)
JIS S 2145:1991/AMENDMENT 1:2006
Metallic flexible hoses for gas (Amendment 1) (FOREIGN STANDARD)
JIS S 2145:1991
Metallic flexible hoses for gas (FOREIGN STANDARD)
JIS K 7042:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped rigid joints (FOREIGN STANDARD)
JIS K 7040:1998
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amount of constituents using the gravimetric method (FOREIGN STANDARD)
JIS K 7039:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions (FOREIGN STANDARD)
JIS K 7038:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection (FOREIGN STANDARD)
JIS K 7037:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength (FOREIGN STANDARD)
JIS K 7036:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints (FOREIGN STANDARD)
JIS K 7035:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness (FOREIGN STANDARD)
JIS K 7033:1998
Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial tensile properties (FOREIGN STANDARD)
JIS K 7032:2002
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness (FOREIGN STANDARD)
JIS K 7030:1997
Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) -- Definitions of terms relating pressure, including relationship between them, and terms for installation and jointing (FOREIGN STANDARD)
JIS K 7020:1998
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use (FOREIGN STANDARD)
JIS K 7014:1997
Fittings and joints for fibre reinforced plastic pipes (FOREIGN STANDARD)
JIS K 7013:1997
Fibre reinforced plastic pipes (FOREIGN STANDARD)
JIS K 6914:1995/AMENDMENT 1:2006
Laminated thermosetting tubes (Amendment 1) (FOREIGN STANDARD)
JIS K 6914:1995
Laminated thermosetting tubes (FOREIGN STANDARD)
JIS K 6816:2008
Thermoplastics pipes and fittings -- Test method for Vicat softening temperature (Foreign Standard)
JIS K 6814:2008
Thermoplastics pipes -- Thermal reversion test method (Foreign Standard)
JIS K 6812:2003
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds (FOREIGN STANDARD)
JIS K 6796:1998
Pipes and fitting made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content (FOREIGN STANDARD)
JIS K 6795:1998
Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength (FOREIGN STANDARD)
JIS K 6793:2004
Polybutene (PB) pipe fittings for water supply (FOREIGN STANDARD)
JIS K 6792:2004
Polybutene (PB) pipes for water supply (FOREIGN STANDARD)
JIS K 6788:2004
Crosslinked polyethylene (PE-X) pipe fittings for water supply (FOREIGN STANDARD)
JIS K 6787:2004
Crosslinked polyethylene (PE-X) pipes for water supply (FOREIGN STANDARD)
JIS K 6780:2003/AMENDMENT 1:2008
Profile wall polyethylene pipes(Amendment 1) (Foreign Standard)
JIS K 6780:2003
Profile wall polyethylene pipes (FOREIGN STANDARD)
JIS K 6779:2004
Polybutene (PB) pipe fittings (FOREIGN STANDARD)
JIS K 6778:2004
Polybutene (PB) pipes (FOREIGN STANDARD)
JIS K 6777:2007
Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (FOREIGN STANDARD)
JIS K 6776:2007
Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply (FOREIGN STANDARD)
JIS K 6771:1995
Flexible vinyl tube (FOREIGN STANDARD)
JIS K 6770:2004/AMENDMENT 1:2008
Crosslinked polyethylene (PE-X) pipe fittings (Amendment 1) (FOREIGN STANDARD)
JIS K 6770:2004
Crosslinked polyethylene (PE-X) pipe fittings (FOREIGN STANDARD)
JIS K 6769:2004
Crosslinked polyethylene (PE-X) pipes (FOREIGN STANDARD)
JIS K 6762:2004
Double wall polyethylene pipes for water supply (FOREIGN STANDARD)
JIS K 6761:2004
Polyethylene pipes for General Purposes (FOREIGN STANDARD)
JIS K 6741:2007
Unplasticized poly (vinyl chloride) (PVC-U) pipes (FOREIGN STANDARD)
JIS K 6375:1999
Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification (FOREIGN STANDARD)
JIS K 6349-3:1999
Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (FOREIGN STANDARD)
JIS K 6349-2:1999
Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification (FOREIGN STANDARD)
JIS K 6349-1:1999
Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification (FOREIGN STANDARD)
JIS K 6330-9:2003
Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing (FOREIGN STANDARD)
JIS K 6330-1:2003
Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions for hoses and hose assemblies (FOREIGN STANDARD)
JIS H 4635:2006
Titanium and titanium alloy welded pipes (FOREIGN STANDARD)
JIS H 4631:2006
Titanium and titanium alloy tubes for heat exchangers (FOREIGN STANDARD)
JIS H 4630:2007
Titanium and titanium alloys -- Seamless pipes (FOREIGN STANDARD)
JIS H 4202:2005
Magnesium alloy seamless pipes and tubes (FOREIGN STANDARD)
JIS H 3401:2001
Pipe fittings of copper and copper alloys (FOREIGN STANDARD)
JIS H 3330:2003
Plastic covered copper tubes (FOREIGN STANDARD)
JIS H 3300:2006
Copper and copper alloy seamless pipes and tubes (FOREIGN STANDARD)
JIS H 0517:2004
Differential pressure testing method of titanium welded tubes (FOREIGN STANDARD)
JIS H 0502:1986
Method of eddy current testing for copper and copper alloy pipes and tubes (FOREIGN STANDARD)
JIS G 5528:1984/AMENDMENT 1:2006
Epoxy-powder coating for interior of ductile iron pipes and fittings (Amendment 1) (FOREIGN STANDARD)
JIS G 5528:1984
Epoxy-powder coating for interior of ductile iron pipes and fittings (FOREIGN STANDARD)
JIS G 5527:1998
Ductile iron fittings (FOREIGN STANDARD)
JIS G 5526:1998
Ductile iron pipes (FOREIGN STANDARD)
JIS G 3471:1977
Corrugated steel pipes and sections (FOREIGN STANDARD)
JIS G 3469:2002
Polyethylene coated steel pipes (FOREIGN STANDARD)
JIS G 3468:2004
Large diameter welded stainless steel pipes (FOREIGN STANDARD)
JIS G 3461:2005
Carbon steel boiler and heat exchanger tubes (FOREIGN STANDARD)
JIS G 3459:2004
Stainless steel pipes (FOREIGN STANDARD)
JIS G 3458:2005
Alloy steel pipes (FOREIGN STANDARD)
JIS G 3457:2005
Arc welded carbon steel pipes (FOREIGN STANDARD)
JIS G 3456:2004
Carbon steel pipes for high temperature service (FOREIGN STANDARD)
JIS G 3455:2005
Carbon steel pipes for high pressure service (FOREIGN STANDARD)
JIS G 3454:2007
Carbon steel pipes for pressure service (FOREIGN STANDARD)
JIS G 3452:2004
Carbon steel pipes for ordinary piping (FOREIGN STANDARD)
JIS G 3448:2004
Light gauge stainless steel tubes for ordinary piping (FOREIGN STANDARD)
JIS G 3444:2006
Carbon steel tubes for general structural purposes (FOREIGN STANDARD)
JIS G 3443-4:2007
Coated steel pipes for water service -- Part 4: Internal epoxy coatings (FOREIGN STANDARD)
JIS G 3443-3:2007
Coated steel pipes for water service -- Part 3: External plastic coatings (FOREIGN STANDARD)
JIS G 3443-2:2007
Coated steel pipes for water service -- Part 2: Fittings (FOREIGN STANDARD)
JIS G 3443-1:2007
Coated steel pipes for water service -- Part 1: Pipes (FOREIGN STANDARD)
JIS G 3442:2004
Galvanized steel pipes for ordinary piping (FOREIGN STANDARD)
JIS G 3441:2004
Alloy steel tubes for machine purposes (FOREIGN STANDARD)
JIS G 0584:2004
Ultrasonic examination for arc welded steel pipes (FOREIGN STANDARD)
JIS G 0583:2004
Eddy current examination of steel pipes and tubes by encircling coil technique (FOREIGN STANDARD)
JIS G 0582:2004
Ultrasonic examination for steel pipes and tubes (FOREIGN STANDARD)
JIS E 6602:2004
Air conditioning units for rolling stock (FOREIGN STANDARD)
JIS D 2609:2002
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (FOREIGN STANDARD)
JIS C 9617:1992
Dehumidifiers (FOREIGN STANDARD)
JIS C 9603:1988/AMENDMENT 1:2006
Ventilating fans (Amendment 1) (FOREIGN STANDARD)
JIS C 9603:1988
Ventilating fans (FOREIGN STANDARD)
JIS C 9601:1990/AMENDMENT 1:2007
Electric fans (Amendment 1) (FOREIGN STANDARD)
JIS C 9601:1990
Electric fans (FOREIGN STANDARD)
JIS C 1031:1990
Methods of evaluating the performance of pressure and differential pressure transmitters for use in industrial-process control systems (FOREIGN STANDARD)
JIS B 9910:1994
Method of measuring performance for dust collectors (FOREIGN STANDARD)
JIS B 9901:1997
Gas-removal -- Method of test for performance of gas-removal filters (FOREIGN STANDARD)
JIS B 8607:2008
Flare type and brazing type fittings for refrigerants (FOREIGN STANDARD)
JIS B 8605:2002
Stop valves for refrigerants (FOREIGN STANDARD)
JIS B 8602:2002
Pipe flanges for refrigerants (FOREIGN STANDARD)
JIS B 8602:1999
Pipe flanges for refrigerants (FOREIGN STANDARD)
JIS B 8502:1986
Construction of welded aluminium and aluminium alloy storage tanks (FOREIGN STANDARD)
JIS B 8473:2007
Fuel oil pipe line -- Solenoid valves (FOREIGN STANDARD)
JIS B 8472:2008
Steam pipe line -- Solenoid valves (Foreign Standard)
JIS B 8471:2004
Water pipe line -- Solenoid valves (FOREIGN STANDARD)
JIS B 8414:2004
Relief valves for hot water appliances (FOREIGN STANDARD)
JIS B 8410:2004
Pressure reducing valves for water works (FOREIGN STANDARD)
JIS B 8401:1999
Automatic steam traps (FOREIGN STANDARD)
JIS B 8400-1:2003
Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector (FOREIGN STANDARD)
JIS B 8376:1994
Speed control valves for pneumatic use (FOREIGN STANDARD)
JIS B 8374:1993
Pneumatic system -- 3-port solenoid operated valves (FOREIGN STANDARD)
JIS B 8373:1993
Pneumatic system -- 2-port solenoid operated valves (FOREIGN STANDARD)
JIS B 8372-2:2003
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers (FOREIGN STANDARD)
JIS B 8372-1:2003
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements (FOREIGN STANDARD)
JIS B 8365:1988
Dimensions of clamped-type vacuum couplings (FOREIGN STANDARD)
JIS B 8358:2004
Hydraulic fluid power -- Bladder type accumulators -- Test methods (FOREIGN STANDARD)
JIS B 8355:1997
Hydraulic fluid power -- Subplate type solenoid operated four-port valves (FOREIGN STANDARD)
JIS B 8342:2008
Small-size reciprocating air compressors (Foreign Standard)
JIS B 8331:2002
Forward-curved bladed fans (FOREIGN STANDARD)
JIS B 8330:2000
Testing methods for turbo-fans (FOREIGN STANDARD)
JIS B 8327:2002
Testing methods for performance of pump, using model pump (FOREIGN STANDARD)
JIS B 8301:2000
Rotodynamic pumps -- Hydraulic performance acceptance tests - Grades 1 and 2 (FOREIGN STANDARD)
JIS B 8286:2005
Sight glasses for pressure vessels (FOREIGN STANDARD)
JIS B 8285:2003
Welding procedure qualification test for pressure vessels (FOREIGN STANDARD)
JIS B 8284:2003
Quick closure for pressure vessels (FOREIGN STANDARD)
JIS B 8280:2003
Pressure vessels of noncircular cross section (FOREIGN STANDARD)
JIS B 8279:2003
Jacket for pressure vessels (FOREIGN STANDARD)
JIS B 8278:2003
Saddle supported horizontal pressure vessels (FOREIGN STANDARD)
JIS B 8266:2003/AMENDMENT 1:2006
Alternative standard for construction of pressure vessels (Amendment 1) (FOREIGN STANDARD)
JIS B 8266:2003
Alternative standard for construction of pressure vessels (FOREIGN STANDARD)
JIS B 8265:2003/AMENDMENT 2:2008
Construction of pressure vessel -- General principles (Amendment 2) (Foreign Standard)
JIS B 8265:2003/AMENDMENT 1:2006
Construction of pressure vessel -- General principles (Amendment 1) (FOREIGN STANDARD)
JIS B 8265:2003
Construction of pressure vessel -- General principles (FOREIGN STANDARD)
JIS B 8246:2004
Valves for high pressure gas cylinders (FOREIGN STANDARD)
JIS B 8245:2004
Valves for liquefied petroleum gas cylinder (FOREIGN STANDARD)
JIS B 8241:1989
Seamless steel gas cylinders (FOREIGN STANDARD)
JIS B 8240:1986
Construction of pressure vessels for refrigeration (FOREIGN STANDARD)
JIS B 8230:1989
Small type seamless steel gas cylinders (FOREIGN STANDARD)
JIS B 6164:1996
Compression type tube fittings for machine tools (FOREIGN STANDARD)
JIS B 2490:2008
Test method for sealing behavior of gaskets for pipe flanges (Foreign Standard)
JIS B 2410:2005
O-rings -- Suitability of elastomeric materials for industrial applications (FOREIGN STANDARD)
JIS B 2408:2005
O-rings -- Quality acceptance criteria (FOREIGN STANDARD)
JIS B 2407:1995
Back-up rings for O-rings (FOREIGN STANDARD)
JIS B 2406:1991
O-rings housings -- Design criteria (FOREIGN STANDARD)
JIS B 2404:2006
Dimensions of gaskets for use with pipe flanges (FOREIGN STANDARD)
JIS B 2403:2009
V packings (Foreign Standard)
JIS B 2401:2005
O-rings (FOREIGN STANDARD)
JIS B 2352:2005
Bellows type expansion joints (FOREIGN STANDARD)
JIS B 2321:1995/AMENDMENT 1:2009
Aluminium and aluminium alloy butt-welding pipe fittings (Amendment 1) (Foreign Standard)
JIS B 2321:1995
Aluminium and aluminium alloy butt-welding pipe fittings (FOREIGN STANDARD)
JIS B 2316:2007
Steel socket-welding pipe fittings (FOREIGN STANDARD)
JIS B 2313:2009
Steel plate butt-welding pipe fittings (Foreign Standard)
JIS B 2312:2009
Steel butt-welding pipe fittings (Foreign Standard)
JIS B 2311:2009
Steel butt-welding pipe fittings for ordinary use (Foreign Standard)
JIS B 2308:2002
Stainless steel threaded fittings (FOREIGN STANDARD)
JIS B 2303:1995
Screwed drainage fittings (FOREIGN STANDARD)
JIS B 2302:1998
Screwed type steel pipe fittings (FOREIGN STANDARD)
JIS B 2301:2004
Screwed type malleable cast iron pipe fittings (FOREIGN STANDARD)
JIS B 2292-2:2005
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series (FOREIGN STANDARD)
JIS B 2292-1:2005
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units (FOREIGN STANDARD)
JIS B 2291:1994
21 MPa slip-on welding pipe flanges for hydraulic use (FOREIGN STANDARD)
JIS B 2290:1998
Vacuum technology -- Flange dimensions (FOREIGN STANDARD)
JIS B 2251:2008
Bolt tighting procedure for pressure boundary flanged joint assembly (Foreign Standard)
JIS B 2241:2006
Aluminium alloy pipe flanges (FOREIGN STANDARD)
JIS B 2240:2006
Copper alloy pipe flanges (FOREIGN STANDARD)
JIS B 2239:2004
Cast iron pipe flanges (FOREIGN STANDARD)
JIS B 2220:2004
Steel pipe flanges (FOREIGN STANDARD)
JIS B 2207:1995/AMENDMENT 1:2006
Basis for calculation of aluminium alloy pipe flanges with full face gasket (Amendment 1) (FOREIGN STANDARD)
JIS B 2207:1995
Basis for calculation of aluminium alloy pipe flanges with full face gasket (FOREIGN STANDARD)
JIS B 2206:1995/AMENDMENT 1:2006
Basis for calculation of aluminium alloy pipe flanges (Amendment 1) (FOREIGN STANDARD)
JIS B 2206:1995
Basis for calculation of aluminium alloy pipe flanges (FOREIGN STANDARD)
JIS B 2205:1991/AMENDMENT 1:2006
Basis for calculation of pipe flanges (Amendment 1) (FOREIGN STANDARD)
JIS B 2205:1991
Basis for calculation of pipe flanges (FOREIGN STANDARD)
JIS B 2071:2000
Steel valves (FOREIGN STANDARD)
JIS B 2061:2006
Faucets, ball taps and flush valves (FOREIGN STANDARD)
JIS B 2051:1994
Malleable iron 10 K screwed valves (FOREIGN STANDARD)
JIS B 2032:1995
Wafer type rubber-seated butterfly valves (FOREIGN STANDARD)
JIS B 2031:1994
Gray cast iron valves (FOREIGN STANDARD)
JIS B 2011:2003/AMENDMENT 1:2004
Bronze gate, globe, angle, and check valves (Amendment 1) (FOREIGN STANDARD)
JIS B 2005-6-2:2005
Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to control valves -- Positioner mounting on rotary actuators (FOREIGN STANDARD)
JIS B 2005-3-3:2005
Industrial-process control valves -- Part 3-3: Dimensions -- End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (FOREIGN STANDARD)
JIS B 2005-3-2:2005
Industrial-process control valves -- Part 3-2: Dimensions -- Face-to-face dimensions for rotary control valves except butterfly valves (FOREIGN STANDARD)
JIS B 2005-3-1:2005
Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (FOREIGN STANDARD)
JIS B 2005-2-1:2005
Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions (FOREIGN STANDARD)
JIS B 2004:1994
General rules for marking on valves (FOREIGN STANDARD)
JIS B 2003:1994
General rules for inspection of valves (FOREIGN STANDARD)
JIS B 2002:1987
Face-to-face and end-to-end dimensions of valves (FOREIGN STANDARD)
JIS B 2001:1987
Nominal size and bore of valves (FOREIGN STANDARD)
JIS A 5314:1998
Mortar lining for ductile iron pipes (FOREIGN STANDARD)
JIS A 4110:1989/AMENDMENT 1:2008
Glassfiber reinforced Plastic Water Tanks (Amendment 1) (FOREIGN STANDARD)
JIS A 4110:1989
Glassfiber reinforced plastic water tanks (FOREIGN STANDARD)
JSA ICS 25, Manufacturing engineering
JIS Z 8307:1964
General rules for pointers of industrial instruments (FOREIGN STANDARD)
JIS Z 8306:1964
General rules for scale of industrial instruments (FOREIGN STANDARD)
JIS Z 3930:2001
Determination of emission rate of particulate fume in arc welding (FOREIGN STANDARD)
JIS Z 3920:1991
Methods for chemical analysis of elements in welding fumes (FOREIGN STANDARD)
JIS Z 3910:2008
Methods for chemical analysis of solder (Foreign Standard)
JIS Z 3906:1988
Methods for chemical analysis of palladium brazing filler metals (FOREIGN STANDARD)
JIS Z 3905:1976/AMENDMENT 1:2006
Methods for chemical analysis of nickel brazing filler metals (Amendment 1) (FOREIGN STANDARD)
JIS Z 3905:1976
Methods for chemical analysis of nickel brazing filler metals (FOREIGN STANDARD)
JIS Z 3903:1988
Methods for chemical analysis of copper phosphorus brazing filler metals (FOREIGN STANDARD)
JIS Z 3902:1984
Methods for chemical analysis of brass brazing filler metals (FOREIGN STANDARD)
JIS Z 3901:1988
Methods for chemical analysis of silver brazing filler metals (FOREIGN STANDARD)
JIS Z 3900:1974
Methods for sampling of precious brazing filler metals (FOREIGN STANDARD)
JIS Z 3881:2002
Standard qualification procedure for gas pressure welding technique (FOREIGN STANDARD)
JIS Z 3871:1987
Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds (FOREIGN STANDARD)
JIS Z 3861:1979
Standard qualification procedure for radiographic testing technique of welds (FOREIGN STANDARD)
JIS Z 3851:1992
Standard qualification procedure for micro soldering technique (FOREIGN STANDARD)
JIS Z 3841:1997
Standard qualification procedure for semi-automatic welding technique (FOREIGN STANDARD)
JIS Z 3831:2002
Standard qualification procedure for welding technique of plastics (FOREIGN STANDARD)
JIS Z 3821:2001
Standard qualification procedure for welding technique of stainless steel (FOREIGN STANDARD)
JIS Z 3811:2000
Standard qualification procedure for welding technique of aluminium and aluminium alloy (FOREIGN STANDARD)
JIS Z 3805:1997
Standard qualification procedure for welding technique of titanium (FOREIGN STANDARD)
JIS Z 3801:1997
Standard qualification procedure for manual welding technique (FOREIGN STANDARD)
JIS Z 3700:2009
Methods of post weld heat treatment (Foreign Standard)
JIS Z 3621:1992
Recommended practice for brazing (FOREIGN STANDARD)
JIS Z 3607:1994
Recommended practice for friction welding of carbon steel (FOREIGN STANDARD)
JIS Z 3604:2002
Recommended practice for inert gas shielded arc welding of aluminium and aluminium alloys (FOREIGN STANDARD)
JIS Z 3423:2006
Procurement guidelines for welding consumables (FOREIGN STANDARD)
JIS Z 3422-2:2003
Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 2: Arc welding of aluminium and its alloys (FOREIGN STANDARD)
JIS Z 3422-1:2003
Specification and approval of welding procedures for metallic materials -- Welding procedure tests -- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (FOREIGN STANDARD)
JIS Z 3421-1:2003
Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding (FOREIGN STANDARD)
JIS Z 3420:2003
Specification and approval of welding procedures for metallic materials -- General rules (FOREIGN STANDARD)
JIS Z 3410:1999
Welding coordination -- Tasks and responsibilities (FOREIGN STANDARD)
JIS Z 3400:1999
Quality requirements for welding -- Fusion welding of metallic materials (FOREIGN STANDARD)
JIS Z 3353:1999/AMENDMENT 1:2007
Electroslag welding solid wires and fluxes for mild steel and high strength steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3353:1999
Electroslag welding solid wires and fluxes for mild steel and high strength steel (FOREIGN STANDARD)
JIS Z 3352:1988/AMENDMENT 1:2007
Submerged arc welding fluxes for carbon steel and low alloy steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3352:1988
Submerged arc welding fluxes for carbon steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3351:1999/AMENDMENT 1:2007
Submerged arc welding solid wires for carbon steel and low alloy steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3351:1999
Submerged arc welding solid wires for carbon steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3341:1999/AMENDMENT 1:2007
Copper and copper alloy rods and solid wires for inert gas shielded arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3341:1999
Copper and copper alloy rods and solid wires for inert gas shielded arc welding (FOREIGN STANDARD)
JIS Z 3334:1999/AMENDMENT 1:2007
Nickel and nickel alloy filler rods and solid wires for arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3334:1999
Nickel and nickel alloy filler rods and solid wires for arc welding (FOREIGN STANDARD)
JIS Z 3333:1999/AMENDMENT 1:2007
Submerged arc welding solid wires and fluxes for 9 % nickel steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3333:1999
Submerged arc welding solid wires and fluxes for 9 % nickel steel (FOREIGN STANDARD)
JIS Z 3332:1999/AMENDMENT 1:2007
Filler rods and solid wires for TIG welding of 9 % nickel steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3332:1999
Filler rods and solid wires for TIG welding of 9 % nickel steel (FOREIGN STANDARD)
JIS Z 3331:2002/AMENDMENT 1:2009
Titanium and titanium alloy welding rods and solid wires (Amendment 1) (Foreign Standard)
JIS Z 3331:2002
Titanium and titanium alloy welding rods and solid wires (FOREIGN STANDARD)
JIS Z 3326:1999/AMENDMENT 1:2007
Arc welding flux cored wires for hardfacing (Amendment 1) (FOREIGN STANDARD)
JIS Z 3326:1999
Arc welding flux cored wires for hardfacing (FOREIGN STANDARD)
JIS Z 3324:1999/AMENDMENT 1:2007
Stainless steel solid wires and fluxes for submerged arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3324:1999
Stainless steel solid wires and fluxes for submerged arc welding (FOREIGN STANDARD)
JIS Z 3323:2007
Stainless steel flux cored wires and rods for arc welding (FOREIGN STANDARD)
JIS Z 3322:2002/AMENDMENT 1:2009
Materials for stainless steel overlay welding with strip electrode (Amendment 1) (Foreign Standard)
JIS Z 3322:2002
Materials for stainless steel overlay welding with strip electrode (FOREIGN STANDARD)
JIS Z 3321:2003/AMENDMENT 1:2007
Stainless steel, welding rods and solid wires (Amendment 1) (FOREIGN STANDARD)
JIS Z 3321:2003
Stainless steel, welding rods and solid wires (FOREIGN STANDARD)
JIS Z 3320:1999/AMENDMENT 1:2007
Flux cored wires for CO2 gas shielded arc welding of atmospheric corrosion resisting steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3320:1999
Flux cored wires for CO2 gas shielded arc welding of atmospheric corrosion resisting steel (FOREIGN STANDARD)
JIS Z 3319:1999/AMENDMENT 1:2007
Flux cored wires for electrogas arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3319:1999
Flux cored wires for electrogas arc welding (FOREIGN STANDARD)
JIS Z 3318:1999/AMENDMENT 1:2007
MAG welding flux cored wires for molybdenum steel and chromium molybdenum steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3318:1999
MAG welding flux cored wires for molybdenum steel and chromium molybdenum steel (FOREIGN STANDARD)
JIS Z 3317:1999/AMENDMENT 1:2007
MAG welding solid wires for molybdenum steel and chromium molybdenum steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3317:1999
MAG welding solid wires for molybdenum steel and chromium molybdenum steel (FOREIGN STANDARD)
JIS Z 3316:2001/AMENDMENT 1:2008
TIG welding rods and solid wires for mild steel and low alloy steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3316:2001
TIG welding rods and solid wires for mild steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3315:1999/AMENDMENT 1:2007
Solid wires for CO2 gas shielded arc welding for atmospheric corrosion resisting steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3315:1999
Solid wires for CO2 gas shielded arc welding for atmospheric corrosion resisting steel (FOREIGN STANDARD)
JIS Z 3284:1994
Solder paste (FOREIGN STANDARD)
JIS Z 3283:2006
Resin flux cored solders (FOREIGN STANDARD)
JIS Z 3282:2006
Soft solders -- Chemical compositions and forms (FOREIGN STANDARD)
JIS Z 3281:1996
Solders for aluminium and aluminium alloys (FOREIGN STANDARD)
JIS Z 3268:1998
Precious brazing filler metals for vacuum service (FOREIGN STANDARD)
JIS Z 3267:1998
Palladium brazing filler metals (FOREIGN STANDARD)
JIS Z 3266:1998
Gold brazing filler metals (FOREIGN STANDARD)
JIS Z 3265:1998
Nickel brazing filler metals (FOREIGN STANDARD)
JIS Z 3264:1998
Copper phosphorus brazing filler metals (FOREIGN STANDARD)
JIS Z 3263:2002
Aluminium alloy brazing filler metals and brazing sheets (FOREIGN STANDARD)
JIS Z 3262:1998
Copper and copper alloy brazing filler metals (FOREIGN STANDARD)
JIS Z 3261:1998
Silver brazing filler metals (FOREIGN STANDARD)
JIS Z 3253:2003
Shielding gases for arc welding and plasma arc cutting (FOREIGN STANDARD)
JIS Z 3252:2001/AMENDMENT 1:2008
Covered electrodes for cast iron (Amendment 1) (FOREIGN STANDARD)
JIS Z 3252:2001
Covered electrodes for cast iron (FOREIGN STANDARD)
JIS Z 3251:2000/AMENDMENT 1:2006
Covered electrodes for hardfacing (Amendment 1) (FOREIGN STANDARD)
JIS Z 3251:2000
Covered electrodes for hardfacing (FOREIGN STANDARD)
JIS Z 3234:1999
Copper alloys for resistance welding electrode (FOREIGN STANDARD)
JIS Z 3233:2001
Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding (FOREIGN STANDARD)
JIS Z 3232:2000
Aluminium and aluminium alloy welding rods and wires (FOREIGN STANDARD)
JIS Z 3231:1999/AMENDMENT 1:2007
Copper and copper alloy covered electrodes (Amendment 1) (FOREIGN STANDARD)
JIS Z 3231:1999
Copper and copper alloy covered electrodes (FOREIGN STANDARD)
JIS Z 3225:1999/AMENDMENT 1:2007
Covered electrodes for 9% nickel steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3225:1999
Covered electrodes for 9% nickel steel (FOREIGN STANDARD)
JIS Z 3224:1999/AMENDMENT 1:2007
Nickel and Nickel-alloy covered electrodes (Amendment 1) (FOREIGN STANDARD)
JIS Z 3224:1999
Nickel and Nickel-alloy covered electrodes (FOREIGN STANDARD)
JIS Z 3223:2000/AMENDMENT 1:2006
Molybdenum steel and chromium molybdenum steel covered electrodes (Amendment 1) (FOREIGN STANDARD)
JIS Z 3223:2000
Molybdenum steel and chromium molybdenum steel covered electrodes (FOREIGN STANDARD)
JIS Z 3221:2008
Stainless steel covered electrodes (Foreign Standard)
JIS Z 3214:1999/AMENDMENT 1:2007
Covered electrodes for atmospheric corrosion resisting steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3214:1999
Covered electrodes for atmospheric corrosion resisting steel (FOREIGN STANDARD)
JIS Z 3202:1999/AMENDMENT 1:2007
Copper and copper alloy gas welding rods (Amendment 1) (FOREIGN STANDARD)
JIS Z 3202:1999
Copper and copper alloy gas welding rods (FOREIGN STANDARD)
JIS Z 3201:2001/AMENDMENT 1:2008
Gas welding rods for mild steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3201:2001
Gas welding rods for mild steel (FOREIGN STANDARD)
JIS Z 3200:2005
Welding consumables -- Technical delivery conditions for welding filler materials -- Type of product, dimensions, tolerances and markings (FOREIGN STANDARD)
JIS Z 3198-7:2003
Test methods for lead-free solders -- Part 7: Methods for shear strength of solder joints on chip components (FOREIGN STANDARD)
JIS Z 3198-6:2003
Test methods for lead-free solders -- Part 6: Methods for 45opull test of solder joints on QFP lead (FOREIGN STANDARD)
JIS Z 3198-5:2003
Test methods for lead-free solders -- Part 5: Methods for tensile tests and shear tests on solder joints (FOREIGN STANDARD)
JIS Z 3198-4:2003
Test methods for lead-free solders -- Part 4: Methods for solderbility test by a wetting balance method and a contact angle method (FOREIGN STANDARD)
JIS Z 3198-3:2003
Test methods for lead-free solders -- Part 3: Methods for spread test (FOREIGN STANDARD)
JIS Z 3198-2:2003
Test methods for lead-free solders -- Part 2: Methods for testing of mechanical characteristics-tensile test (FOREIGN STANDARD)
JIS Z 3198-1:2003
Test methods for lead-free solders -- Part 1: Methods for measuring of melting temperature ranges (FOREIGN STANDARD)
JIS Z 3197:1999
Testing methods for soldering fluxes (FOREIGN STANDARD)
JIS Z 3192:1999
Methods of tensile and shear tests for brazed joint (FOREIGN STANDARD)
JIS Z 3191:2003
Method of wetting test for brazing filler metals (FOREIGN STANDARD)
JIS Z 3184:2003
Method of preparing deposited metal pad and samples for chemical analysis (FOREIGN STANDARD)
JIS Z 3183:1993
Classification and testing methods for deposited metal of submerged arc welding for carbon steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3181:2005
Method of fillet weld test for welding consumables (FOREIGN STANDARD)
JIS Z 3159:1993
Method of H-type restrained weld cracking test (FOREIGN STANDARD)
JIS Z 3158:1993
Method of Y-groove weld cracking test (FOREIGN STANDARD)
JIS Z 3157:1993
Method of U-groove weld cracking test (FOREIGN STANDARD)
JIS Z 3155:1993
Method of FISCO test (FOREIGN STANDARD)
JIS Z 3154:1993
Method of controlled thermal severity weld cracking test (FOREIGN STANDARD)
JIS Z 3153:1993
Method of T-joint weld cracking test (FOREIGN STANDARD)
JIS Z 3145:1981
Method of bend test for stud welds (FOREIGN STANDARD)
JIS Z 3144:1996
Routine test of resistance spot and projection welds (FOREIGN STANDARD)
JIS Z 3143:1996
Method of test for butt pressure welded joints (FOREIGN STANDARD)
JIS Z 3141:1996
Method of test for seam welded joints (FOREIGN STANDARD)
JIS Z 3140:1989
Method of inspection for spot weld (FOREIGN STANDARD)
JIS Z 3139:1978
Method of macro test for section of spot welded joint (FOREIGN STANDARD)
JIS Z 3138:1989
Method of fatigue testing for spot welded joint (FOREIGN STANDARD)
JIS Z 3137:1999
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welded joints (FOREIGN STANDARD)
JIS Z 3136:1999
Specimen dimensions and procedure for shear testing resistance spot and embcossed projection welded joints (FOREIGN STANDARD)
JIS Z 3134:1965
Method of bend test for T type fillet welded joint (FOREIGN STANDARD)
JIS Z 3132:1976
Method of shear test for side fillet welded joint (FOREIGN STANDARD)
JIS Z 3131:1976
Method of tension test for front fillet welded joint (FOREIGN STANDARD)
JIS Z 3129:2005
Test method and preparation of test specimens for single-run and two-run welding technique in steel (FOREIGN STANDARD)
JIS Z 3128:1996
Method of impact test for welded joint (FOREIGN STANDARD)
JIS Z 3122:1990
Methods of bend test for butt welded joint (FOREIGN STANDARD)
JIS Z 3121:1993
Methods of tensile test for butt welded joints (FOREIGN STANDARD)
JIS Z 3120:1980
Method of inspection for gas pressure welded joint of steel bars for concrete reinforcement (FOREIGN STANDARD)
JIS Z 3119:2006
Methods of measurement for ferrite content in austenitic and austenitic-ferritic stainless steel deposited metals (FOREIGN STANDARD)
JIS Z 3118:2007
Method for measurement of amount of hydrogen evolved from steel welds (FOREIGN STANDARD)
JIS Z 3115:1973
Method of taper hardness test in weld heat-affected zone (FOREIGN STANDARD)
JIS Z 3114:1990
Method of hardness test for deposited metal (FOREIGN STANDARD)
JIS Z 3111:2005
Methods of tension and impact tests for deposited metal (FOREIGN STANDARD)
JIS Z 3109:1988
Method of radiographic testing for aluminium T-welds (FOREIGN STANDARD)
JIS Z 3108:1986
Methods of radiographic test for circumferential butt welds of aluminium pipes and tubes (FOREIGN STANDARD)
JIS Z 3107:1993/AMENDMENT 1:2008
Methods of radiographic examination for titanium welds by X-ray (Amendment 1) (FOREIGN STANDARD)
JIS Z 3107:1993
Methods of radiographic examination for titanium welds by X-ray (FOREIGN STANDARD)
JIS Z 3106:2001
Methods of radiographic examination for welded joints in stainless steel (FOREIGN STANDARD)
JIS Z 3104:1995
Methods of radiographic examination for welded joints in steel (FOREIGN STANDARD)
JIS Z 3040:1995
Method of qualification test for welding procedure (FOREIGN STANDARD)
JIS Z 3040:1995
Method of qualification test for welding procedure (FOREIGN STANDARD)
JIS Z 3011:2004
Welding position defined by means of angles of slope and rotation (FOREIGN STANDARD)
JIS Z 3011:2004
Welding position defined by means of angles of slope and rotation (FOREIGN STANDARD)
JIS Z 1903:2007
Petrolatum paste for corrosion protection (FOREIGN STANDARD)
JIS Z 1903:2007
Petrolatum paste for corrosion protection (FOREIGN STANDARD)
JIS Z 1901:2004
Pressure sensitive adhesive polyvinyl chloride tapes for corrosion protection (FOREIGN STANDARD)
JIS Z 1901:2004
Pressure sensitive adhesive polyvinyl chloride tapes for corrosion protection (FOREIGN STANDARD)
JIS Z 0313:2004
Test and assessment of abrasive blast-cleaned substrates before application of paints (FOREIGN STANDARD)
JIS Z 0313:2004
Test and assessment of abrasive blast-cleaned substrates before application of paints (FOREIGN STANDARD)
JIS Z 0312:2004
Non-metallic blast-cleaning abrasives (FOREIGN STANDARD)
JIS Z 0312:2004
Non-metallic blast-cleaning abrasives (FOREIGN STANDARD)
JIS Z 0311:2004
Metallic blast-cleaning abrasives (FOREIGN STANDARD)
JIS Z 0311:2004
Metallic blast-cleaning abrasives (FOREIGN STANDARD)
JIS Z 0310:2004
Abrasive blast-cleaning methods for surface preparation (FOREIGN STANDARD)
JIS Z 0310:2004
Abrasive blast-cleaning methods for surface preparation (FOREIGN STANDARD)
JIS S 3012:1998
Vitreous and porcelain enamelled household warers of sheet steel (FOREIGN STANDARD)
JIS S 3012:1998
Vitreous and porcelain enamelled household warers of sheet steel (FOREIGN STANDARD)
JIS R 7223:1997
Chemical analysis of graphite materials (FOREIGN STANDARD)
JIS R 7223:1997
Chemical analysis of graphite materials (FOREIGN STANDARD)
JIS R 7222:1997
Test methods for physical properties of graphite materials (FOREIGN STANDARD)
JIS R 7202:2008
Testing methods for taper screw thread angle and pitch diameter of cylindrical machined graphite electrodes (Foreign Standard)
JIS R 6261:2006
Coated abrasives -- Flap discs (FOREIGN STANDARD)
JIS R 6259:2006
Coated abrasives -- Flap wheels with incorporated flanges or separate flanges (FOREIGN STANDARD)
JIS R 6258:2006
Coated abrasives -- Flap wheels with shaft (FOREIGN STANDARD)
JIS R 6257:2006
Coated abrasives -- Cylindrical sleeves (FOREIGN STANDARD)
JIS R 6256:2006
Abrasive belts (FOREIGN STANDARD)
JIS R 6255:2006
Abrasive discs (FOREIGN STANDARD)
JIS R 6253:2006
Waterproof abrasive papers (FOREIGN STANDARD)
JIS R 6252:2006
Abrasive papers (FOREIGN STANDARD)
JIS R 6251:2006
Abrasive cloths (FOREIGN STANDARD)
JIS R 6243:2008
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static testing (Foreign Standard)
JIS R 6242:2006
Bonded abrasive products -- General requirements (FOREIGN STANDARD)
JIS R 6242:2003
Bonded abrasive products -- General requirements (FOREIGN STANDARD)
JIS R 6241:2008
Maximum operating speed of grinding wheels (FOREIGN STANDARD)
JIS R 6240:2008
Testing methods of grinding wheels (FOREIGN STANDARD)
JIS R 6219:2006
Magnesia grinding wheels (FOREIGN STANDARD)
JIS R 6219:2003
Magnesia grinding wheels (FOREIGN STANDARD)
JIS R 6218:2006
Segment grinding wheels (FOREIGN STANDARD)
JIS R 6218:2003
Segment grinding wheels (FOREIGN STANDARD)
JIS R 6211-9:2006
Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding (FOREIGN STANDARD)
JIS R 6211-9:2001
Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding (FOREIGN STANDARD)
JIS R 6211-8:2003
Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and fettling/snagging (FOREIGN STANDARD)
JIS R 6211-7:2003
Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding (FOREIGN STANDARD)
JIS R 6211-6:2003
Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding (FOREIGN STANDARD)
JIS R 6211-5:2003
Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face grinding (FOREIGN STANDARD)
JIS R 6211-4:2003
Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding (FOREIGN STANDARD)
JIS R 6211-3:2003
Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding (FOREIGN STANDARD)
JIS R 6211-2:2003
Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centerless external cylindrical grinding (FOREIGN STANDARD)
JIS R 6211-16:2006
Bonded abrasive products -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools (FOREIGN STANDARD)
JIS R 6211-16:2003
Bonded abrasive products -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools (FOREIGN STANDARD)
JIS R 6211-15:2003
Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines (FOREIGN STANDARD)
JIS R 6211-14:2003
Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder (FOREIGN STANDARD)
JIS R 6211-13:2003
Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder (FOREIGN STANDARD)
JIS R 6211-12:2003
Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder (FOREIGN STANDARD)
JIS R 6211-11:2003
Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks (FOREIGN STANDARD)
JIS R 6211-10:2003
Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings (FOREIGN STANDARD)
JIS R 6211-1:2003
Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres (FOREIGN STANDARD)
JIS R 6130:2002
Testing method for bulk density of artificial abrasives (FOREIGN STANDARD)
JIS R 6125:2005
Testing method for density of artificial abrasives (FOREIGN STANDARD)
JIS R 6111:2005
Artificial abrasives (FOREIGN STANDARD)
JIS R 6011:1991
Testing method for grain size of coated abrasive macrogrits (P12-P220) (FOREIGN STANDARD)
JIS R 6001:1998
Bonded abrasive grain sizes (FOREIGN STANDARD)
JIS K 6940:1998
Glass flakes vinyl ester resin lining films (FOREIGN STANDARD)
JIS K 6894:1996
Fluoroplastic coating film on metal substrate (FOREIGN STANDARD)
JIS K 6766:2008
Pinhole test method of lined films for corrosion prevention (FOREIGN STANDARD)
JIS K 6333:1999
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes (FOREIGN STANDARD)
JIS K 5674:2008
Lead-free, Chromium-free anticorrosive paints (FOREIGN STANDARD)
JIS H 9303:2004
Recommended practice for cermet sprayed coatings (FOREIGN STANDARD)
JIS H 9302:2007
Recommended practice for ceramic sprayed coatings (FOREIGN STANDARD)
JIS H 8690:1993
Titanium nitride coatings by dry processing (FOREIGN STANDARD)
JIS H 8689:1998
Test method for continuity of anodic oxide coatings on aluminium and aluminium alloys -- Copper sulphate test (FOREIGN STANDARD)
JIS H 8688:1998
Test method for determination of mass per unit area of anodic oxide coatings on aluminium and aluminium alloys -- Gravimetric method (FOREIGN STANDARD)
JIS H 8687:1996
Test methods for dielectric strength of anodic oxidation coatings on aluminium and aluminium alloys (FOREIGN STANDARD)
JIS H 8686-2:1999
Test methods for image clarity of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Instrumental method (FOREIGN STANDARD)
JIS H 8686-1:1999
Test methods for image clarity of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Chart scale method (FOREIGN STANDARD)
JIS H 8685-2:1999
Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Test for light fastness to ultra-violet light (FOREIGN STANDARD)
JIS H 8685-1:1999
Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Test for light fastness to artificial light (FOREIGN STANDARD)
JIS H 8684:1997
Test method for resistance of anodic oxidation coatings on aluminium and aluminium alloys to cracking by deformation (FOREIGN STANDARD)
JIS H 8683-3:1999
Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Admittance test method (FOREIGN STANDARD)
JIS H 8683-2:1999
Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Phosphoric-chromic acid solution immersion test method (FOREIGN STANDARD)
JIS H 8683-1:1999
Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Dye spot test method (FOREIGN STANDARD)
JIS H 8682-3:1999
Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Sand-falling abrasion resistance test (FOREIGN STANDARD)
JIS H 8682-2:1999
Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Abrasive jet test (FOREIGN STANDARD)
JIS H 8682-1:1999
Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Wheel wear test (FOREIGN STANDARD)
JIS H 8681-2:1999
Test methods for corrosion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: CASS test (FOREIGN STANDARD)
JIS H 8681-1:1999
Test methods for corrosion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Alkali resistance test (FOREIGN STANDARD)
JIS H 8680-3:1998
Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Non-destructive measurement by split-beam microscope (FOREIGN STANDARD)
JIS H 8680-2:1998
Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Eddy current method (FOREIGN STANDARD)
JIS H 8680-1:1998
Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part1: Microscopical method (FOREIGN STANDARD)
JIS H 8679-2:1999
Evaluation methods for pitting corrosion of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Grid method (FOREIGN STANDARD)
JIS H 8679-1:1999
Evaluation methods for pitting corrosion of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Chart method (FOREIGN STANDARD)
JIS H 8672:1995
Methods of test for hot dip aluminized coatings on ferrous products (FOREIGN STANDARD)
JIS H 8665:1994
Testing methods for spray fused coatings of self-fluxing alloys (FOREIGN STANDARD)
JIS H 8664:2004
Test methods for build-up thermal spraying (FOREIGN STANDARD)
JIS H 8646:1991
Electroless copper platings (FOREIGN STANDARD)
JIS H 8645:1999
Autocatalytic nickel-phosphorus coatings on metals (FOREIGN STANDARD)
JIS H 8642:1995
Hot dip aluminized coatings on ferrous products (FOREIGN STANDARD)
JIS H 8641:2007
Hot dip galvanized coatings (FOREIGN STANDARD)
JIS H 8630:2006
Electroplated coatings on plastics materials for decorative purposes (FOREIGN STANDARD)
JIS H 8625:1993
Chromate conversion coatings on electroplated zinc and cadmium coatings (FOREIGN STANDARD)
JIS H 8624:1999
Electroplated coatings of Tin-Lead alloys (FOREIGN STANDARD)
JIS H 8622:1993
Electroplated coatings of gold and gold alloy for decorative purposes (FOREIGN STANDARD)
JIS H 8621:1998
Electroplated coatings of silver for engineering purposes (FOREIGN STANDARD)
JIS H 8620:1998
Electroplated coatings of gold and gold alloy for engineering purposes (FOREIGN STANDARD)
JIS H 8619:1999
Electroplated coatings of tin (FOREIGN STANDARD)
JIS H 8617:1999
Electroplated coatings of nickel and chromium (FOREIGN STANDARD)
JIS H 8615:1999
Electroplated coatings of chromium for engineering purposes (FOREIGN STANDARD)
JIS H 8611:1999
Electroplated coatings of cadmium on iron or steel (FOREIGN STANDARD)
JIS H 8610:1999
Electroplated coatings of zinc on iron or steel (FOREIGN STANDARD)
JIS H 8603:1999
Hard anodic oxide coatings on aluminium and its alloys (FOREIGN STANDARD)
JIS H 8602:1992
Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys (FOREIGN STANDARD)
JIS H 8601:1999
Anodic oxide coatings on aluminium and aluminium alloys (FOREIGN STANDARD)
JIS H 8504:1999
Methods of adhesion test for metallic coatings (FOREIGN STANDARD)
JIS H 8503:1989
Methods of wear resistance test for metallic coatings (FOREIGN STANDARD)
JIS H 8502:1999
Methods of corrosion resistance test for metallic coatings (FOREIGN STANDARD)
JIS H 8501:1999
Methods of thickness test for metallic coatings (FOREIGN STANDARD)
JIS H 8452:2008
Testing method for thermal cycle resistance of oxidation resistant metallic coatings (Foreign Standard)
JIS H 8451:2008
Testing methods for thermal cycle and thermal shock resistance of thermal barrier coatings (Foreign Standard)
JIS H 8402:2004
Test methods of tensile adhesive strength for thermal-sprayed coatings (FOREIGN STANDARD)
JIS H 8401:1999
Methods of thickness measurement for sprayed coatings (FOREIGN STANDARD)
JIS H 8304:2007
Ceramic sprayed coatings (FOREIGN STANDARD)
JIS H 8303:2004
Thermal spraying of self-fluxing alloy (FOREIGN STANDARD)
JIS H 8302:2004
Build-up thermal spraying (FOREIGN STANDARD)
JIS H 8300:2005
Thermal spraying -- Zinc, aluminium and their alloys (FOREIGN STANDARD)
JIS H 8261:2007
Wires, rods and cords for flame and arc thermal spraying (FOREIGN STANDARD)
JIS H 8260:2007
Powders for thermal spraying (FOREIGN STANDARD)
JIS H 0404:1988
Graphical symbol for electroplated coating (FOREIGN STANDARD)
JIS H 0401:2007
Test methods for hot dip galvanized coatings (FOREIGN STANDARD)
JIS G 4404:2006
Alloy tool steels (FOREIGN STANDARD)
JIS G 4403:2006
High speed tool steels (FOREIGN STANDARD)
JIS G 4401:2006
Carbon tool steels (FOREIGN STANDARD)
JIS G 3601:2002
Stainless-clad steels (FOREIGN STANDARD)
JIS G 3543:2005/AMENDMENT 1:2008
Steel wire coated with colored plastics(Amendment 1) (Foreign Standard)
JIS G 3543:2005
Steel wire coated with colored plastics (FOREIGN STANDARD)
JIS G 3523:1980/AMENDMENT 1:2008
Core wires for covered electrode (Amendment 1) (FOREIGN STANDARD)
JIS G 3523:1980
Core wires for covered electrode (FOREIGN STANDARD)
JIS G 3503:2006
Wire rods for core wire of covered electrode (FOREIGN STANDARD)
JIS G 3315:2008
Chromium coated tin free steel (FOREIGN STANDARD)
JIS G 3303:2008
Tinplate and blackplate (FOREIGN STANDARD)
JIS G 3114:2008
Hot-rolled atmospheric corrosion resisting steels for welded structure (Foreign Standard)
JIS G 3106:2008
Rolled steels for welded structure (Foreign Standard)
JIS G 0601:2002
Testing methods for clad steel (FOREIGN STANDARD)
JIS E 4047:2008
Rolling stock -- Body frame -- Design methods for welded joints (FOREIGN STANDARD)
JIS D 8105:1994
Wheel nut wrenches for automobiles (FOREIGN STANDARD)
JIS C 9611:1990
Electric disc grinders (FOREIGN STANDARD)
JIS C 9610:1976/AMENDMENT 1:2006
Portable electric grinders (Amendment 1) (FOREIGN STANDARD)
JIS C 9610:1976
Portable electric grinders (FOREIGN STANDARD)
JIS C 9605:1988
Portable electric drills (FOREIGN STANDARD)
JIS C 9325:2009
Electrode force measuring device for resistance welding equipment (Foreign Standard)
JIS C 9323:1999
Electric resistance welding -- Transformers -- General specifications applicable to all transformers (FOREIGN STANDARD)
JIS C 9321:1991/AMENDMENT 1:2009
Capacitor discharge type spot welding machines (Amendment 1) (Foreign Standard)
JIS C 9321:1991
Capacitor discharge type spot welding machines (FOREIGN STANDARD)
JIS C 9319:1991
Thyristorstacks for resistance welding machine (FOREIGN STANDARD)
JIS C 9318:1999
Water-cooled secondary cables for portable spot welding machines (FOREIGN STANDARD)
JIS C 9317:1995
Welding transformers for portable spot welding machines (FOREIGN STANDARD)
JIS C 9307:1999
Projection welding machines (FOREIGN STANDARD)
JIS C 9305:1999
General rule for resistance welding machines (FOREIGN STANDARD)
JIS C 9304:1999
Spot welding electrodes (FOREIGN STANDARD)
JIS C 4556:1987
Electronic preset counters (FOREIGN STANDARD)
JIS C 4555:1980
Electro magnetic counters (FOREIGN STANDARD)
JIS C 3663-6:2007
Rubber insulated cables -- Rated voltages up to and including 450/750V -- Part 6: Arc welding electrode cables (FOREIGN STANDARD)
JIS C 3404:2000
Welding cables (FOREIGN STANDARD)
JIS C 1901:1987
An interface system for programmable measuring instruments (FOREIGN STANDARD)
JIS C 1804:1995
Operating conditions for industrial-process measurement and control equipment (FOREIGN STANDARD)
JIS C 1803:1995
General rules for defining expression of the performance of industrial-process measurement and control equipment (FOREIGN STANDARD)
JIS C 1801:1986
Method of evaluating the performance of controllers with analogue signals for use in industrial process control (FOREIGN STANDARD)
JIS B 8439:1992
Industrial robots -- Programming language slim (FOREIGN STANDARD)
JIS B 7540:1972
V-blocks (FOREIGN STANDARD)
JIS B 6915:1999
Process of nitriding and nitrocarburizing of iron and steel (FOREIGN STANDARD)
JIS B 6914:2002
Process of carburizing and carbonitriding, quenching and tempering of iron and steel (FOREIGN STANDARD)
JIS B 6913:1999
Process of quenching and tempering of iron and steel (FOREIGN STANDARD)
JIS B 6911:1999
Process of normalizing and annealing of iron and steel (FOREIGN STANDARD)
JIS B 6901:1998
Heat treatment furnaces of metals -- Test methods of effective working zone and effective treating zone (FOREIGN STANDARD)
JIS B 6805:2003
Rubber hose connection for equipment for welding, cutting and allied processes (FOREIGN STANDARD)
JIS B 6803:2003
Pressure regulator for welding, cutting and allied processes (FOREIGN STANDARD)
JIS B 6801:2003
Manual blowpipes for welding, cutting and heating (FOREIGN STANDARD)
JIS B 6702:1992
Dimensions relating to molds for plastics compression molding machines and plastics transfer molding machines (FOREIGN STANDARD)
JIS B 6701:1992
Dimensions relating to molds for plastics injection molding machines (FOREIGN STANDARD)
JIS B 6572:1992
Numerically controlled routing machines -- Test methods for performance and accuracy (FOREIGN STANDARD)
JIS B 6513:1989
Test methods for performance and accuracy of vertical wood milling machines (FOREIGN STANDARD)
JIS B 6471:1987
Die blocks for closed-die press forging (FOREIGN STANDARD)
JIS B 6470:1983
Die blocks for closed-die hammer forging (FOREIGN STANDARD)
JIS B 6420:1992
Presswork machinery -- Symbols for operations (FOREIGN STANDARD)
JIS B 6406:1991
Mechanical pressess -- Methods of measurement of A-weighted sound pressure level (FOREIGN STANDARD)
JIS B 6402:1997
Mechanical power presses -- Testing of the accuracy (FOREIGN STANDARD)
JIS B 6340:1992
Machining centers -- Dimensions of spindle noses (FOREIGN STANDARD)
JIS B 6336-2:2002
Test conditions for machining centres -- Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) (FOREIGN STANDARD)
JIS B 6334:1986
Test code for performance and accuracy of numerically controlled horizontal boring machines (table type) (FOREIGN STANDARD)
JIS B 6333:1986
Test code for performance and accuracy of numerically controlled knee type vertical milling machines (FOREIGN STANDARD)
JIS B 6332:1986
Test code for performance and accuracy of numerically controlled turret and single spindle drilling machines with vertical spindle (FOREIGN STANDARD)
JIS B 6327:1985
NC processor input -- Basic part program reference language (FOREIGN STANDARD)
JIS B 6326:1980
Numerical control processor output-minor elements of 2000-Type records (FOREIGN STANDARD)
JIS B 6325:1980
Numerical control processor output -- CLDATA (FOREIGN STANDARD)
JIS B 6310:2003
Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature (FOREIGN STANDARD)
JIS B 6252:2004
Test conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 4: Planer type machines with movable column (FOREIGN STANDARD)
JIS B 6251:2004
Machine tools -- Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table -- Testing of the accuracy (FOREIGN STANDARD)
JIS B 6228:2003
Bridge type plano-milling machines -- Testing of the accuracy (FOREIGN STANDARD)
JIS B 6218:1990
Test code for performance and accuracy of single spindle automatic lathes (sliding headstock type) (FOREIGN STANDARD)
JIS B 6151:1993
Scroll chucks (FOREIGN STANDARD)
JIS B 6131:2004
Machine tools -- Lathe tool posts -- Overall internal height (FOREIGN STANDARD)
JIS B 6101:2004
7/24 tapers for tool shanks for manual changing (FOREIGN STANDARD)
JIS B 6014:1980
General code of safety for machine tools (FOREIGN STANDARD)
JIS B 6011:2004
Machine tools -- Direction of operation of controls (FOREIGN STANDARD)
JIS B 6010:1977
Machine tool speeds and feeds (FOREIGN STANDARD)
JIS B 4707:1992
Paper cutting machine -- Paper cutting knives (FOREIGN STANDARD)
JIS B 4705:1966
Saw files (FOREIGN STANDARD)
JIS B 4704:1964
Set files (FOREIGN STANDARD)
JIS B 4703:1966
Files (FOREIGN STANDARD)
JIS B 4652:2008
Hand torque tools -- Requirements and test methods (Foreign Standard)
JIS B 4651:1998
Combination wrenches (FOREIGN STANDARD)
JIS B 4648:2008
Hexagon socket screw keys (Foreign Standard)
JIS B 4636-2:1998
Socket wrenches -- 6.3 - 25 square drive (FOREIGN STANDARD)
JIS B 4636-1:1998
Socket wrenches -- 12.7 mm square drive (FOREIGN STANDARD)
JIS B 4635:2002
Heavy duty cutting nippers (FOREIGN STANDARD)
JIS B 4633:1998
Screwdrivers for cross recessed head screws (FOREIGN STANDARD)
JIS B 4632:1998
Offset wrenches (FOREIGN STANDARD)
JIS B 4631:1998
Round nose chain pliers with side cutters (FOREIGN STANDARD)
JIS B 4630:1998
Open ended spanners (FOREIGN STANDARD)
JIS B 4627:1994
Hand riveter (FOREIGN STANDARD)
JIS B 4624:1998
Round nose pliers (FOREIGN STANDARD)
JIS B 4623:1998
Cutting pliers (FOREIGN STANDARD)
JIS B 4609:1998
Screwdrivers for slotted-head screws (FOREIGN STANDARD)
JIS B 4604:1998
Adjustable angle wrenches (FOREIGN STANDARD)
JIS B 4502:1996/AMENDMENT 1:2009
Thread rolling flat dies (Amendment 1) (Foreign Standard)
JIS B 4502:1996
Thread rolling flat dies (FOREIGN STANDARD)
JIS B 4501:1996/AMENDMENT 1:2009
Thread rolling cylindrical dies (Amendment 1) (Foreign Standard)
JIS B 4501:1996
Thread rolling cylindrical dies (FOREIGN STANDARD)
JIS B 4433:1990
Nut taps (FOREIGN STANDARD)
JIS B 4430:1998
Short machine taps and hand taps for metric threads (FOREIGN STANDARD)
JIS B 4239:1999/AMENDMENT 1:2009
Involute spline broaches (Amendment 1) (Foreign Standard)
JIS B 4239:1999
Involute spline broaches (FOREIGN STANDARD)
JIS B 4238:1999/AMENDMENT 1:2009
Keyway Broaches (Amendment 1) (Foreign Standard)
JIS B 4238:1999
Keyway broaches (FOREIGN STANDARD)
JIS B 4237:1987
Dimensions of pull and follower ends of broach (FOREIGN STANDARD)
JIS B 4236:1998/AMENDMENT 1:2009
Milling cutters -- Counterbores for hexagon socket head bolts (Amendment 1) (Foreign Standard)
JIS B 4236:1998
Milling cutters -- Counterbores for hexagon socket head bolts (FOREIGN STANDARD)
JIS B 4220:1988/AMENDMENT 1:2009
Screw Slotting Cutters (Amendment 1) (Foreign Standard)
JIS B 4220:1988
Screw slotting cutters (FOREIGN STANDARD)
JIS B 4213:1996/AMENDMENT 1:2009
Tapered end mills for trapeziform runner with parallel shanks (Amendment 1) (Foreign Standard)
JIS B 4213:1996
Tapered end mills for trapeziform runner with parallel shanks (FOREIGN STANDARD)
JIS B 4210:1997/AMENDMENT 1:2009
Tapered end mills (Amendment 1) (Foreign Standard)
JIS B 4210:1997
Tapered end mills (FOREIGN STANDARD)
JIS B 4152:1988
High speed steel tipped tools (FOREIGN STANDARD)
JIS B 4140:2006
Diamond/CBN products -- Diamond or CBN electroplated tools (FOREIGN STANDARD)
JIS B 4140:1997
Diamond or cubic boron nitride electroplated tools (FOREIGN STANDARD)
JIS B 4134:1994
Single point diamond dressing tools (FOREIGN STANDARD)
JIS B 4052:2008
Recommendation of wheels for free hand grinding (FOREIGN STANDARD)
JIS B 4051:2008
Recommendation of grinding wheels (FOREIGN STANDARD)
JIS B 4004:1966
1/10 tapers tool shanks (FOREIGN STANDARD)
JIS B 3521:2004
Protocol specification for FA control network standard (FOREIGN STANDARD)
JIS B 3502:2004
Programmable controllers -- Equipment requirements and tests (FOREIGN STANDARD)
JIS B 3501:2004
Programmable controllers -- Part 1: General information (FOREIGN STANDARD)
JIS B 2711:2005
Shot peening (FOREIGN STANDARD)
JIS B 0952:1999
Machine tool tables -- T-slots and corresponding bolts (FOREIGN STANDARD)
JIS B 0951:1962
Knurling (FOREIGN STANDARD)
JIS B 0712:1969
Stock allowance for finish cut (FOREIGN STANDARD)
JIS B 0702:1977
Radius of machine parts (press working of sheet metals) (FOREIGN STANDARD)
JIS B 0410:1991
General tolerances for parts formed by shear from metal plates (FOREIGN STANDARD)
JIS B 0408:1991
General dimensional tolerances for parts formed by press working from sheet metal (FOREIGN STANDARD)
JSA ICS 27, Energy and heat transfer engineering
JIS Z 8307:1964
General rules for pointers of industrial instruments (FOREIGN STANDARD)
JIS Z 8306:1964
General rules for scale of industrial instruments (FOREIGN STANDARD)
JIS Z 3930:2001
Determination of emission rate of particulate fume in arc welding (FOREIGN STANDARD)
JIS Z 3920:1991
Methods for chemical analysis of elements in welding fumes (FOREIGN STANDARD)
JIS Z 3910:2008
Methods for chemical analysis of solder (Foreign Standard)
JIS Z 3906:1988
Methods for chemical analysis of palladium brazing filler metals (FOREIGN STANDARD)
JIS Z 3905:1976/AMENDMENT 1:2006
Methods for chemical analysis of nickel brazing filler metals (Amendment 1) (FOREIGN STANDARD)
JIS Z 3905:1976
Methods for chemical analysis of nickel brazing filler metals (FOREIGN STANDARD)
JIS Z 3903:1988
Methods for chemical analysis of copper phosphorus brazing filler metals (FOREIGN STANDARD)
JIS Z 3902:1984
Methods for chemical analysis of brass brazing filler metals (FOREIGN STANDARD)
JIS Z 3901:1988
Methods for chemical analysis of silver brazing filler metals (FOREIGN STANDARD)
JIS Z 3900:1974
Methods for sampling of precious brazing filler metals (FOREIGN STANDARD)
JIS Z 3881:2002
Standard qualification procedure for gas pressure welding technique (FOREIGN STANDARD)
JIS Z 3871:1987
Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds (FOREIGN STANDARD)
JIS Z 3861:1979
Standard qualification procedure for radiographic testing technique of welds (FOREIGN STANDARD)
JIS Z 3851:1992
Standard qualification procedure for micro soldering technique (FOREIGN STANDARD)
JIS Z 3841:1997
Standard qualification procedure for semi-automatic welding technique (FOREIGN STANDARD)
JIS Z 3831:2002
Standard qualification procedure for welding technique of plastics (FOREIGN STANDARD)
JIS Z 3821:2001
Standard qualification procedure for welding technique of stainless steel (FOREIGN STANDARD)
JIS Z 3811:2000
Standard qualification procedure for welding technique of aluminium and aluminium alloy (FOREIGN STANDARD)
JIS Z 3805:1997
Standard qualification procedure for welding technique of titanium (FOREIGN STANDARD)
JIS Z 3801:1997
Standard qualification procedure for manual welding technique (FOREIGN STANDARD)
JIS Z 3700:2009
Methods of post weld heat treatment (Foreign Standard)
JIS Z 3621:1992
Recommended practice for brazing (FOREIGN STANDARD)
JIS Z 3607:1994
Recommended practice for friction welding of carbon steel (FOREIGN STANDARD)
JIS Z 3604:2002
Recommended practice for inert gas shielded arc welding of aluminium and aluminium alloys (FOREIGN STANDARD)
JIS Z 3423:2006
Procurement guidelines for welding consumables (FOREIGN STANDARD)
JIS Z 3422-2:2003
Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 2: Arc welding of aluminium and its alloys (FOREIGN STANDARD)
JIS Z 3422-1:2003
Specification and approval of welding procedures for metallic materials -- Welding procedure tests -- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (FOREIGN STANDARD)
JIS Z 3421-1:2003
Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding (FOREIGN STANDARD)
JIS Z 3420:2003
Specification and approval of welding procedures for metallic materials -- General rules (FOREIGN STANDARD)
JIS Z 3410:1999
Welding coordination -- Tasks and responsibilities (FOREIGN STANDARD)
JIS Z 3400:1999
Quality requirements for welding -- Fusion welding of metallic materials (FOREIGN STANDARD)
JIS Z 3353:1999/AMENDMENT 1:2007
Electroslag welding solid wires and fluxes for mild steel and high strength steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3353:1999
Electroslag welding solid wires and fluxes for mild steel and high strength steel (FOREIGN STANDARD)
JIS Z 3352:1988/AMENDMENT 1:2007
Submerged arc welding fluxes for carbon steel and low alloy steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3352:1988
Submerged arc welding fluxes for carbon steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3351:1999/AMENDMENT 1:2007
Submerged arc welding solid wires for carbon steel and low alloy steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3351:1999
Submerged arc welding solid wires for carbon steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3341:1999/AMENDMENT 1:2007
Copper and copper alloy rods and solid wires for inert gas shielded arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3341:1999
Copper and copper alloy rods and solid wires for inert gas shielded arc welding (FOREIGN STANDARD)
JIS Z 3334:1999/AMENDMENT 1:2007
Nickel and nickel alloy filler rods and solid wires for arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3334:1999
Nickel and nickel alloy filler rods and solid wires for arc welding (FOREIGN STANDARD)
JIS Z 3333:1999/AMENDMENT 1:2007
Submerged arc welding solid wires and fluxes for 9 % nickel steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3333:1999
Submerged arc welding solid wires and fluxes for 9 % nickel steel (FOREIGN STANDARD)
JIS Z 3332:1999/AMENDMENT 1:2007
Filler rods and solid wires for TIG welding of 9 % nickel steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3332:1999
Filler rods and solid wires for TIG welding of 9 % nickel steel (FOREIGN STANDARD)
JIS Z 3331:2002/AMENDMENT 1:2009
Titanium and titanium alloy welding rods and solid wires (Amendment 1) (Foreign Standard)
JIS Z 3331:2002
Titanium and titanium alloy welding rods and solid wires (FOREIGN STANDARD)
JIS Z 3326:1999/AMENDMENT 1:2007
Arc welding flux cored wires for hardfacing (Amendment 1) (FOREIGN STANDARD)
JIS Z 3326:1999
Arc welding flux cored wires for hardfacing (FOREIGN STANDARD)
JIS Z 3324:1999/AMENDMENT 1:2007
Stainless steel solid wires and fluxes for submerged arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3324:1999
Stainless steel solid wires and fluxes for submerged arc welding (FOREIGN STANDARD)
JIS Z 3323:2007
Stainless steel flux cored wires and rods for arc welding (FOREIGN STANDARD)
JIS Z 3322:2002/AMENDMENT 1:2009
Materials for stainless steel overlay welding with strip electrode (Amendment 1) (Foreign Standard)
JIS Z 3322:2002
Materials for stainless steel overlay welding with strip electrode (FOREIGN STANDARD)
JIS Z 3321:2003/AMENDMENT 1:2007
Stainless steel, welding rods and solid wires (Amendment 1) (FOREIGN STANDARD)
JIS Z 3321:2003
Stainless steel, welding rods and solid wires (FOREIGN STANDARD)
JIS Z 3320:1999/AMENDMENT 1:2007
Flux cored wires for CO2 gas shielded arc welding of atmospheric corrosion resisting steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3320:1999
Flux cored wires for CO2 gas shielded arc welding of atmospheric corrosion resisting steel (FOREIGN STANDARD)
JIS Z 3319:1999/AMENDMENT 1:2007
Flux cored wires for electrogas arc welding (Amendment 1) (FOREIGN STANDARD)
JIS Z 3319:1999
Flux cored wires for electrogas arc welding (FOREIGN STANDARD)
JIS Z 3318:1999/AMENDMENT 1:2007
MAG welding flux cored wires for molybdenum steel and chromium molybdenum steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3318:1999
MAG welding flux cored wires for molybdenum steel and chromium molybdenum steel (FOREIGN STANDARD)
JIS Z 3317:1999/AMENDMENT 1:2007
MAG welding solid wires for molybdenum steel and chromium molybdenum steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3317:1999
MAG welding solid wires for molybdenum steel and chromium molybdenum steel (FOREIGN STANDARD)
JIS Z 3316:2001/AMENDMENT 1:2008
TIG welding rods and solid wires for mild steel and low alloy steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3316:2001
TIG welding rods and solid wires for mild steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3315:1999/AMENDMENT 1:2007
Solid wires for CO2 gas shielded arc welding for atmospheric corrosion resisting steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3315:1999
Solid wires for CO2 gas shielded arc welding for atmospheric corrosion resisting steel (FOREIGN STANDARD)
JIS Z 3284:1994
Solder paste (FOREIGN STANDARD)
JIS Z 3283:2006
Resin flux cored solders (FOREIGN STANDARD)
JIS Z 3282:2006
Soft solders -- Chemical compositions and forms (FOREIGN STANDARD)
JIS Z 3281:1996
Solders for aluminium and aluminium alloys (FOREIGN STANDARD)
JIS Z 3268:1998
Precious brazing filler metals for vacuum service (FOREIGN STANDARD)
JIS Z 3267:1998
Palladium brazing filler metals (FOREIGN STANDARD)
JIS Z 3266:1998
Gold brazing filler metals (FOREIGN STANDARD)
JIS Z 3265:1998
Nickel brazing filler metals (FOREIGN STANDARD)
JIS Z 3264:1998
Copper phosphorus brazing filler metals (FOREIGN STANDARD)
JIS Z 3263:2002
Aluminium alloy brazing filler metals and brazing sheets (FOREIGN STANDARD)
JIS Z 3262:1998
Copper and copper alloy brazing filler metals (FOREIGN STANDARD)
JIS Z 3261:1998
Silver brazing filler metals (FOREIGN STANDARD)
JIS Z 3253:2003
Shielding gases for arc welding and plasma arc cutting (FOREIGN STANDARD)
JIS Z 3252:2001/AMENDMENT 1:2008
Covered electrodes for cast iron (Amendment 1) (FOREIGN STANDARD)
JIS Z 3252:2001
Covered electrodes for cast iron (FOREIGN STANDARD)
JIS Z 3251:2000/AMENDMENT 1:2006
Covered electrodes for hardfacing (Amendment 1) (FOREIGN STANDARD)
JIS Z 3251:2000
Covered electrodes for hardfacing (FOREIGN STANDARD)
JIS Z 3234:1999
Copper alloys for resistance welding electrode (FOREIGN STANDARD)
JIS Z 3233:2001
Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding (FOREIGN STANDARD)
JIS Z 3232:2000
Aluminium and aluminium alloy welding rods and wires (FOREIGN STANDARD)
JIS Z 3231:1999/AMENDMENT 1:2007
Copper and copper alloy covered electrodes (Amendment 1) (FOREIGN STANDARD)
JIS Z 3231:1999
Copper and copper alloy covered electrodes (FOREIGN STANDARD)
JIS Z 3225:1999/AMENDMENT 1:2007
Covered electrodes for 9% nickel steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3225:1999
Covered electrodes for 9% nickel steel (FOREIGN STANDARD)
JIS Z 3224:1999/AMENDMENT 1:2007
Nickel and Nickel-alloy covered electrodes (Amendment 1) (FOREIGN STANDARD)
JIS Z 3224:1999
Nickel and Nickel-alloy covered electrodes (FOREIGN STANDARD)
JIS Z 3223:2000/AMENDMENT 1:2006
Molybdenum steel and chromium molybdenum steel covered electrodes (Amendment 1) (FOREIGN STANDARD)
JIS Z 3223:2000
Molybdenum steel and chromium molybdenum steel covered electrodes (FOREIGN STANDARD)
JIS Z 3221:2008
Stainless steel covered electrodes (Foreign Standard)
JIS Z 3214:1999/AMENDMENT 1:2007
Covered electrodes for atmospheric corrosion resisting steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3214:1999
Covered electrodes for atmospheric corrosion resisting steel (FOREIGN STANDARD)
JIS Z 3202:1999/AMENDMENT 1:2007
Copper and copper alloy gas welding rods (Amendment 1) (FOREIGN STANDARD)
JIS Z 3202:1999
Copper and copper alloy gas welding rods (FOREIGN STANDARD)
JIS Z 3201:2001/AMENDMENT 1:2008
Gas welding rods for mild steel (Amendment 1) (FOREIGN STANDARD)
JIS Z 3201:2001
Gas welding rods for mild steel (FOREIGN STANDARD)
JIS Z 3200:2005
Welding consumables -- Technical delivery conditions for welding filler materials -- Type of product, dimensions, tolerances and markings (FOREIGN STANDARD)
JIS Z 3198-7:2003
Test methods for lead-free solders -- Part 7: Methods for shear strength of solder joints on chip components (FOREIGN STANDARD)
JIS Z 3198-6:2003
Test methods for lead-free solders -- Part 6: Methods for 45opull test of solder joints on QFP lead (FOREIGN STANDARD)
JIS Z 3198-5:2003
Test methods for lead-free solders -- Part 5: Methods for tensile tests and shear tests on solder joints (FOREIGN STANDARD)
JIS Z 3198-4:2003
Test methods for lead-free solders -- Part 4: Methods for solderbility test by a wetting balance method and a contact angle method (FOREIGN STANDARD)
JIS Z 3198-3:2003
Test methods for lead-free solders -- Part 3: Methods for spread test (FOREIGN STANDARD)
JIS Z 3198-2:2003
Test methods for lead-free solders -- Part 2: Methods for testing of mechanical characteristics-tensile test (FOREIGN STANDARD)
JIS Z 3198-1:2003
Test methods for lead-free solders -- Part 1: Methods for measuring of melting temperature ranges (FOREIGN STANDARD)
JIS Z 3197:1999
Testing methods for soldering fluxes (FOREIGN STANDARD)
JIS Z 3192:1999
Methods of tensile and shear tests for brazed joint (FOREIGN STANDARD)
JIS Z 3191:2003
Method of wetting test for brazing filler metals (FOREIGN STANDARD)
JIS Z 3184:2003
Method of preparing deposited metal pad and samples for chemical analysis (FOREIGN STANDARD)
JIS Z 3183:1993
Classification and testing methods for deposited metal of submerged arc welding for carbon steel and low alloy steel (FOREIGN STANDARD)
JIS Z 3181:2005
Method of fillet weld test for welding consumables (FOREIGN STANDARD)
JIS Z 3159:1993
Method of H-type restrained weld cracking test (FOREIGN STANDARD)
JIS Z 3158:1993
Method of Y-groove weld cracking test (FOREIGN STANDARD)
JIS Z 3157:1993
Method of U-groove weld cracking test (FOREIGN STANDARD)
JIS Z 3155:1993
Method of FISCO test (FOREIGN STANDARD)
JIS Z 3154:1993
Method of controlled thermal severity weld cracking test (FOREIGN STANDARD)
JIS Z 3153:1993
Method of T-joint weld cracking test (FOREIGN STANDARD)
JIS Z 3145:1981
Method of bend test for stud welds (FOREIGN STANDARD)
JIS Z 3144:1996
Routine test of resistance spot and projection welds (FOREIGN STANDARD)
JIS Z 3143:1996
Method of test for butt pressure welded joints (FOREIGN STANDARD)
JIS Z 3141:1996
Method of test for seam welded joints (FOREIGN STANDARD)
JIS Z 3140:1989
Method of inspection for spot weld (FOREIGN STANDARD)
JIS Z 3139:1978
Method of macro test for section of spot welded joint (FOREIGN STANDARD)
JIS Z 3138:1989
Method of fatigue testing for spot welded joint (FOREIGN STANDARD)
JIS Z 3137:1999
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welded joints (FOREIGN STANDARD)
JIS Z 3136:1999
Specimen dimensions and procedure for shear testing resistance spot and embcossed projection welded joints (FOREIGN STANDARD)
JIS Z 3134:1965
Method of bend test for T type fillet welded joint (FOREIGN STANDARD)
JIS Z 3132:1976
Method of shear test for side fillet welded joint (FOREIGN STANDARD)
JIS Z 3131:1976
Method of tension test for front fillet welded joint (FOREIGN STANDARD)
JIS Z 3129:2005
Test method and preparation of test specimens for single-run and two-run welding technique in steel (FOREIGN STANDARD)
JIS Z 3128:1996
Method of impact test for welded joint (FOREIGN STANDARD)
JIS Z 3122:1990
Methods of bend test for butt welded joint (FOREIGN STANDARD)
JIS Z 3121:1993
Methods of tensile test for butt welded joints (FOREIGN STANDARD)
JIS Z 3120:1980
Method of inspection for gas pressure welded joint of steel bars for concrete reinforcement (FOREIGN STANDARD)
JIS Z 3119:2006
Methods of measurement for ferrite content in austenitic and austenitic-ferritic stainless steel deposited metals (FOREIGN STANDARD)
JIS Z 3118:2007
Method for measurement of amount of hydrogen evolved from steel welds (FOREIGN STANDARD)
JIS Z 3115:1973
Method of taper hardness test in weld heat-affected zone (FOREIGN STANDARD)
JIS Z 3114:1990
Method of hardness test for deposited metal (FOREIGN STANDARD)
JIS Z 3111:2005
Methods of tension and impact tests for deposited metal (FOREIGN STANDARD)
JIS Z 3109:1988
Method of radiographic testing for aluminium T-welds (FOREIGN STANDARD)
JIS Z 3108:1986
Methods of radiographic test for circumferential butt welds of aluminium pipes and tubes (FOREIGN STANDARD)
JIS Z 3107:1993/AMENDMENT 1:2008
Methods of radiographic examination for titanium welds by X-ray (Amendment 1) (FOREIGN STANDARD)
JIS Z 3107:1993
Methods of radiographic examination for titanium welds by X-ray (FOREIGN STANDARD)
JIS Z 3106:2001
Methods of radiographic examination for welded joints in stainless steel (FOREIGN STANDARD)
JIS Z 3104:1995
Methods of radiographic examination for welded joints in steel (FOREIGN STANDARD)
JIS Z 3103:1987
Method of repeated tension fatigue testing for fusion welded joints (FOREIGN STANDARD)
JIS Z 3101:1990
Testing method of maximum hardness in weld heat-affected zone (FOREIGN STANDARD)
JIS Z 3090:2005
Visual testing method of fusion-welded joints (FOREIGN STANDARD)
JIS Z 3082:1995
Methods of ultrasonic examination for T type welds of aluminium plates (FOREIGN STANDARD)
JIS Z 3081:1994
Methods of ultrasonic angle beam examination for welds of aluminium pipes and tubes (FOREIGN STANDARD)
JIS Z 3080:1995
Methods of ultrasonic angle beam examination for butt welds of aluminium plates (FOREIGN STANDARD)
JIS Z 3070:1998
Methods for automatic ultrasonic testing for welds of ferritic steel (FOREIGN STANDARD)
JIS Z 3050:1995
Method of nondestructive examination for weld of pipeline (FOREIGN STANDARD)
JIS Z 3044:1991
Method of welding procedure qualification test for nickel and nickel alloy clad steels (FOREIGN STANDARD)
JIS Z 3043:1990
Method of welding procedure qualification test for stainless-clad steel (FOREIGN STANDARD)
JIS Z 3040:1995
Method of qualification test for welding procedure (FOREIGN STANDARD)
JIS Z 3011:2004
Welding position defined by means of angles of slope and rotation (FOREIGN STANDARD)
JIS Z 1903:2007
Petrolatum paste for corrosion protection (FOREIGN STANDARD)
JIS Z 1901:2004
Pressure sensitive adhesive polyvinyl chloride tapes for corrosion protection (FOREIGN STANDARD)
JIS Z 0313:2004
Test and assessment of abrasive blast-cleaned substrates before application of paints (FOREIGN STANDARD)
JIS Z 0312:2004
Non-metallic blast-cleaning abrasives (FOREIGN STANDARD)
JIS Z 0311:2004
Metallic blast-cleaning abrasives (FOREIGN STANDARD)
JIS Z 0310:2004
Abrasive blast-cleaning methods for surface preparation (FOREIGN STANDARD)
JIS S 3012:1998
Vitreous and porcelain enamelled household warers of sheet steel (FOREIGN STANDARD)
JIS R 7223:1997
Chemical analysis of graphite materials (FOREIGN STANDARD)
JIS R 7222:1997
Test methods for physical properties of graphite materials (FOREIGN STANDARD)
JIS R 7202:2008
Testing methods for taper screw thread angle and pitch diameter of cylindrical machined graphite electrodes (Foreign Standard)
JIS R 6261:2006
Coated abrasives -- Flap discs (FOREIGN STANDARD)
JIS R 6259:2006
Coated abrasives -- Flap wheels with incorporated flanges or separate flanges (FOREIGN STANDARD)
JIS R 6258:2006
Coated abrasives -- Flap wheels with shaft (FOREIGN STANDARD)
JIS R 6257:2006
Coated abrasives -- Cylindrical sleeves (FOREIGN STANDARD)
JIS R 6256:2006
Abrasive belts (FOREIGN STANDARD)
JIS R 6255:2006
Abrasive discs (FOREIGN STANDARD)
JIS R 6253:2006
Waterproof abrasive papers (FOREIGN STANDARD)
JIS R 6252:2006
Abrasive papers (FOREIGN STANDARD)
JIS R 6251:2006
Abrasive cloths (FOREIGN STANDARD)
JIS R 6243:2008
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static testing (Foreign Standard)
JIS R 6242:2006
Bonded abrasive products -- General requirements (FOREIGN STANDARD)
JIS R 6242:2003
Bonded abrasive products -- General requirements (FOREIGN STANDARD)
JIS R 6241:2008
Maximum operating speed of grinding wheels (FOREIGN STANDARD)
JIS R 6240:2008
Testing methods of grinding wheels (FOREIGN STANDARD)
JIS R 6219:2006
Magnesia grinding wheels (FOREIGN STANDARD)
JIS R 6219:2003
Magnesia grinding wheels (FOREIGN STANDARD)
JIS R 6218:2006
Segment grinding wheels (FOREIGN STANDARD)
JIS R 6218:2003
Segment grinding wheels (FOREIGN STANDARD)
JIS R 6211-9:2006
Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding (FOREIGN STANDARD)
JIS R 6211-9:2001
Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding (FOREIGN STANDARD)
JIS R 6211-8:2003
Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and fettling/snagging (FOREIGN STANDARD)
JIS R 6211-7:2003
Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding (FOREIGN STANDARD)
JIS R 6211-6:2003
Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding (FOREIGN STANDARD)
JIS R 6211-5:2003
Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face grinding (FOREIGN STANDARD)
JIS R 6211-4:2003
Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding (FOREIGN STANDARD)
JIS R 6211-3:2003
Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding (FOREIGN STANDARD)
JIS R 6211-2:2003
Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centerless external cylindrical grinding (FOREIGN STANDARD)
JIS R 6211-16:2006
Bonded abrasive products -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools (FOREIGN STANDARD)
JIS R 6211-16:2003
Bonded abrasive products -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools (FOREIGN STANDARD)
JIS R 6211-15:2003
Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines (FOREIGN STANDARD)
JIS R 6211-14:2003
Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder (FOREIGN STANDARD)
JIS R 6211-13:2003
Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder (FOREIGN STANDARD)
JIS R 6211-12:2003
Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder (FOREIGN STANDARD)
JIS R 6211-11:2003
Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks (FOREIGN STANDARD)
JIS R 6211-10:2003
Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings (FOREIGN STANDARD)
JIS R 6211-1:2003
Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres (FOREIGN STANDARD)
JIS R 6130:2002
Testing method for bulk density of artificial abrasives (FOREIGN STANDARD)
JIS R 6125:2005
Testing method for density of artificial abrasives (FOREIGN STANDARD)
JIS R 6111:2005
Artificial abrasives (FOREIGN STANDARD)
JIS R 6011:1991
Testing method for grain size of coated abrasive macrogrits (P12-P220) (FOREIGN STANDARD)
JIS R 6001:1998
Bonded abrasive grain sizes (FOREIGN STANDARD)
JIS K 6940:1998
Glass flakes vinyl ester resin lining films (FOREIGN STANDARD)
JIS K 6894:1996
Fluoroplastic coating film on metal substrate (FOREIGN STANDARD)
JIS K 6766:2008
Pinhole test method of lined films for corrosion prevention (FOREIGN STANDARD)
JIS K 6333:1999
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes (FOREIGN STANDARD)
JIS K 5674:2008
Lead-free, Chromium-free anticorrosive paints (FOREIGN STANDARD)
JIS H 9303:2004
Recommended practice for cermet sprayed coatings (FOREIGN STANDARD)
JIS H 9302:2007
Recommended practice for ceramic sprayed coatings (FOREIGN STANDARD)
JIS H 8690:1993
Titanium nitride coatings by dry processing (FOREIGN STANDARD)
JIS H 8689:1998
Test method for continuity of anodic oxide coatings on aluminium and aluminium alloys -- Copper sulphate test (FOREIGN STANDARD)
JIS H 8688:1998
Test method for determination of mass per unit area of anodic oxide coatings on aluminium and aluminium alloys -- Gravimetric method (FOREIGN STANDARD)
JIS H 8687:1996
Test methods for dielectric strength of anodic oxidation coatings on aluminium and aluminium alloys (FOREIGN STANDARD)
JIS H 8686-2:1999
Test methods for image clarity of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Instrumental method (FOREIGN STANDARD)
JIS H 8686-1:1999
Test methods for image clarity of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Chart scale method (FOREIGN STANDARD)
JIS H 8685-2:1999
Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Test for light fastness to ultra-violet light (FOREIGN STANDARD)
JIS H 8685-1:1999
Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Test for light fastness to artificial light (FOREIGN STANDARD)
JIS H 8684:1997
Test method for resistance of anodic oxidation coatings on aluminium and aluminium alloys to cracking by deformation (FOREIGN STANDARD)
JIS H 8683-3:1999
Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Admittance test method (FOREIGN STANDARD)
JIS H 8683-2:1999
Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Phosphoric-chromic acid solution immersion test method (FOREIGN STANDARD)
JIS H 8683-1:1999
Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Dye spot test method (FOREIGN STANDARD)
JIS H 8682-3:1999
Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Sand-falling abrasion resistance test (FOREIGN STANDARD)
JIS H 8682-2:1999
Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Abrasive jet test (FOREIGN STANDARD)
JIS H 8682-1:1999
Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Wheel wear test (FOREIGN STANDARD)
JIS H 8681-2:1999
Test methods for corrosion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: CASS test (FOREIGN STANDARD)
JIS H 8681-1:1999
Test methods for corrosion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Alkali resistance test (FOREIGN STANDARD)
JIS H 8680-3:1998
Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Non-destructive measurement by split-beam microscope (FOREIGN STANDARD)
JIS H 8680-2:1998
Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Eddy current method (FOREIGN STANDARD)
JIS H 8680-1:1998
Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part1: Microscopical method (FOREIGN STANDARD)
JIS H 8679-2:1999
Evaluation methods for pitting corrosion of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Grid method (FOREIGN STANDARD)
JIS H 8679-1:1999
Evaluation methods for pitting corrosion of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Chart method (FOREIGN STANDARD)
JIS H 8672:1995
Methods of test for hot dip aluminized coatings on ferrous products (FOREIGN STANDARD)
JIS H 8665:1994
Testing methods for spray fused coatings of self-fluxing alloys (FOREIGN STANDARD)
JIS H 8664:2004
Test methods for build-up thermal spraying (FOREIGN STANDARD)
JIS H 8646:1991
Electroless copper platings (FOREIGN STANDARD)
JIS H 8645:1999
Autocatalytic nickel-phosphorus coatings on metals (FOREIGN STANDARD)
JIS H 8642:1995
Hot dip aluminized coatings on ferrous products (FOREIGN STANDARD)
JIS H 8641:2007
Hot dip galvanized coatings (FOREIGN STANDARD)
JIS H 8630:2006
Electroplated coatings on plastics materials for decorative purposes (FOREIGN STANDARD)
JIS H 8625:1993
Chromate conversion coatings on electroplated zinc and cadmium coatings (FOREIGN STANDARD)
JIS H 8624:1999
Electroplated coatings of Tin-Lead alloys (FOREIGN STANDARD)
JIS H 8622:1993
Electroplated coatings of gold and gold alloy for decorative purposes (FOREIGN STANDARD)
JIS H 8621:1998
Electroplated coatings of silver for engineering purposes (FOREIGN STANDARD)
JIS H 8620:1998
Electroplated coatings of gold and gold alloy for engineering purposes (FOREIGN STANDARD)
JIS H 8619:1999
Electroplated coatings of tin (FOREIGN STANDARD)
JIS H 8617:1999
Electroplated coatings of nickel and chromium (FOREIGN STANDARD)
JIS H 8615:1999
Electroplated coatings of chromium for engineering purposes (FOREIGN STANDARD)
JIS H 8611:1999
Electroplated coatings of cadmium on iron or steel (FOREIGN STANDARD)
JIS H 8610:1999
Electroplated coatings of zinc on iron or steel (FOREIGN STANDARD)
JIS H 8603:1999
Hard anodic oxide coatings on aluminium and its alloys (FOREIGN STANDARD)
JIS H 8602:1992
Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys (FOREIGN STANDARD)
JIS H 8601:1999
Anodic oxide coatings on aluminium and aluminium alloys (FOREIGN STANDARD)
JIS H 8504:1999
Methods of adhesion test for metallic coatings (FOREIGN STANDARD)
JIS H 8503:1989
Methods of wear resistance test for metallic coatings (FOREIGN STANDARD)
JIS H 8502:1999
Methods of corrosion resistance test for metallic coatings (FOREIGN STANDARD)
JIS H 8501:1999
Methods of thickness test for metallic coatings (FOREIGN STANDARD)
JIS H 8452:2008
Testing method for thermal cycle resistance of oxidation resistant metallic coatings (Foreign Standard)
JIS H 8451:2008
Testing methods for thermal cycle and thermal shock resistance of thermal barrier coatings (Foreign Standard)
JIS H 8402:2004
Test methods of tensile adhesive strength for thermal-sprayed coatings (FOREIGN STANDARD)
JIS H 8401:1999
Methods of thickness measurement for sprayed coatings (FOREIGN STANDARD)
JIS H 8304:2007
Ceramic sprayed coatings (FOREIGN STANDARD)
JIS H 8303:2004
Thermal spraying of self-fluxing alloy (FOREIGN STANDARD)
JIS H 8302:2004
Build-up thermal spraying (FOREIGN STANDARD)
JIS H 8300:2005
Thermal spraying -- Zinc, aluminium and their alloys (FOREIGN STANDARD)
JIS H 8261:2007
Wires, rods and cords for flame and arc thermal spraying (FOREIGN STANDARD)
JIS H 8260:2007
Powders for thermal spraying (FOREIGN STANDARD)
JIS H 0404:1988
Graphical symbol for electroplated coating (FOREIGN STANDARD)
JIS H 0401:2007
Test methods for hot dip galvanized coatings (FOREIGN STANDARD)
JIS G 4404:2006
Alloy tool steels (FOREIGN STANDARD)
JIS G 4403:2006
High speed tool steels (FOREIGN STANDARD)
JIS G 4401:2006
Carbon tool steels (FOREIGN STANDARD)
JIS G 3601:2002
Stainless-clad steels (FOREIGN STANDARD)
JIS G 3543:2005/AMENDMENT 1:2008
Steel wire coated with colored plastics(Amendment 1) (Foreign Standard)
JIS G 3543:2005
Steel wire coated with colored plastics (FOREIGN STANDARD)
JIS G 3523:1980/AMENDMENT 1:2008
Core wires for covered electrode (Amendment 1) (FOREIGN STANDARD)
JIS G 3523:1980
Core wires for covered electrode (FOREIGN STANDARD)
JIS G 3503:2006
Wire rods for core wire of covered electrode (FOREIGN STANDARD)
JIS G 3315:2008
Chromium coated tin free steel (FOREIGN STANDARD)
JIS G 3303:2008
Tinplate and blackplate (FOREIGN STANDARD)
JIS G 3114:2008
Hot-rolled atmospheric corrosion resisting steels for welded structure (Foreign Standard)
JIS G 3106:2008
Rolled steels for welded structure (Foreign Standard)
JIS G 0601:2002
Testing methods for clad steel (FOREIGN STANDARD)
JIS E 4047:2008
Rolling stock -- Body frame -- Design methods for welded joints (FOREIGN STANDARD)
JIS D 8105:1994
Wheel nut wrenches for automobiles (FOREIGN STANDARD)
JIS C 9611:1990
Electric disc grinders (FOREIGN STANDARD)
JIS C 9610:1976/AMENDMENT 1:2006
Portable electric grinders (Amendment 1) (FOREIGN STANDARD)
JIS C 9610:1976
Portable electric grinders (FOREIGN STANDARD)
JIS C 9605:1988
Portable electric drills (FOREIGN STANDARD)
JIS C 9325:2009
Electrode force measuring device for resistance welding equipment (Foreign Standard)
JIS C 9323:1999
Electric resistance welding -- Transformers -- General specifications applicable to all transformers (FOREIGN STANDARD)
JIS C 9321:1991/AMENDMENT 1:2009
Capacitor discharge type spot welding machines (Amendment 1) (Foreign Standard)
JIS C 9321:1991
Capacitor discharge type spot welding machines (FOREIGN STANDARD)
JIS C 9319:1991
Thyristorstacks for resistance welding machine (FOREIGN STANDARD)
JIS C 9318:1999
Water-cooled secondary cables for portable spot welding machines (FOREIGN STANDARD)
JIS C 9317:1995
Welding transformers for portable spot welding machines (FOREIGN STANDARD)
JIS C 9307:1999
Projection welding machines (FOREIGN STANDARD)
JIS C 9305:1999
General rule for resistance welding machines (FOREIGN STANDARD)
JIS C 9304:1999
Spot welding electrodes (FOREIGN STANDARD)
JIS C 4556:1987
Electronic preset counters (FOREIGN STANDARD)
JIS C 4555:1980
Electro magnetic counters (FOREIGN STANDARD)
JIS C 3663-6:2007
Rubber insulated cables -- Rated voltages up to and including 450/750V -- Part 6: Arc welding electrode cables (FOREIGN STANDARD)
JIS C 3404:2000
Welding cables (FOREIGN STANDARD)
JIS C 1901:1987
An interface system for programmable measuring instruments (FOREIGN STANDARD)
JIS C 1804:1995
Operating conditions for industrial-process measurement and control equipment (FOREIGN STANDARD)
JIS C 1803:1995
General rules for defining expression of the performance of industrial-process measurement and control equipment (FOREIGN STANDARD)
JIS C 1801:1986
Method of evaluating the performance of controllers with analogue signals for use in industrial process control (FOREIGN STANDARD)
JIS B 8439:1992
Industrial robots -- Programming language slim (FOREIGN STANDARD)
JIS B 7540:1972
V-blocks (FOREIGN STANDARD)
JIS B 6915:1999
Process of nitriding and nitrocarburizing of iron and steel (FOREIGN STANDARD)
JIS B 6914:2002
Process of carburizing and carbonitriding, quenching and tempering of iron and steel (FOREIGN STANDARD)
JIS B 6913:1999
Process of quenching and tempering of iron and steel (FOREIGN STANDARD)
JIS B 6911:1999
Process of normalizing and annealing of iron and steel (FOREIGN STANDARD)
JIS B 6901:1998
Heat treatment furnaces of metals -- Test methods of effective working zone and effective treating zone (FOREIGN STANDARD)
JIS B 6805:2003
Rubber hose connection for equipment for welding, cutting and allied processes (FOREIGN STANDARD)
JIS B 6803:2003
Pressure regulator for welding, cutting and allied processes (FOREIGN STANDARD)
JIS B 6801:2003
Manual blowpipes for welding, cutting and heating (FOREIGN STANDARD)
JIS B 6702:1992
Dimensions relating to molds for plastics compression molding machines and plastics transfer molding machines (FOREIGN STANDARD)
JIS B 6701:1992
Dimensions relating to molds for plastics injection molding machines (FOREIGN STANDARD)
JIS B 6572:1992
Numerically controlled routing machines -- Test methods for performance and accuracy (FOREIGN STANDARD)
JIS B 6513:1989
Test methods for performance and accuracy of vertical wood milling machines (FOREIGN STANDARD)
JIS B 6471:1987
Die blocks for closed-die press forging (FOREIGN STANDARD)
JIS B 6470:1983
Die blocks for closed-die hammer forging (FOREIGN STANDARD)
JIS B 6420:1992
Presswork machinery -- Symbols for operations (FOREIGN STANDARD)
JIS B 6406:1991
Mechanical pressess -- Methods of measurement of A-weighted sound pressure level (FOREIGN STANDARD)
JIS B 6402:1997
Mechanical power presses -- Testing of the accuracy (FOREIGN STANDARD)
JIS B 6340:1992
Machining centers -- Dimensions of spindle noses (FOREIGN STANDARD)
JIS B 6336-2:2002
Test conditions for machining centres -- Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) (FOREIGN STANDARD)
JIS B 6334:1986
Test code for performance and accuracy of numerically controlled horizontal boring machines (table type) (FOREIGN STANDARD)
JIS B 6333:1986
Test code for performance and accuracy of numerically controlled knee type vertical milling machines (FOREIGN STANDARD)
JIS B 6332:1986
Test code for performance and accuracy of numerically controlled turret and single spindle drilling machines with vertical spindle (FOREIGN STANDARD)
JIS B 6327:1985
NC processor input -- Basic part program reference language (FOREIGN STANDARD)
JIS B 6326:1980
Numerical control processor output-minor elements of 2000-Type records (FOREIGN STANDARD)
JIS B 6325:1980
Numerical control processor output -- CLDATA (FOREIGN STANDARD)
JIS B 6310:2003
Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature (FOREIGN STANDARD)
JIS B 6252:2004
Test conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 4: Planer type machines with movable column (FOREIGN STANDARD)
JIS B 6251:2004
Machine tools -- Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table -- Testing of the accuracy (FOREIGN STANDARD)
JIS B 6228:2003
Bridge type plano-milling machines -- Testing of the accuracy (FOREIGN STANDARD)
JIS B 6218:1990
Test code for performance and accuracy of single spindle automatic lathes (sliding headstock type) (FOREIGN STANDARD)
JIS B 6151:1993
Scroll chucks (FOREIGN STANDARD)
JIS B 6131:2004
Machine tools -- Lathe tool posts -- Overall internal height (FOREIGN STANDARD)
JIS B 6101:2004
7/24 tapers for tool shanks for manual changing (FOREIGN STANDARD)
JIS B 6014:1980
General code of safety for machine tools (FOREIGN STANDARD)
JIS B 6011:2004
Machine tools -- Direction of operation of controls (FOREIGN STANDARD)
JIS B 6010:1977
Machine tool speeds and feeds (FOREIGN STANDARD)
JIS B 4707:1992
Paper cutting machine -- Paper cutting knives (FOREIGN STANDARD)
JIS B 4705:1966
Saw files (FOREIGN STANDARD)
JIS B 4704:1964
Set files (FOREIGN STANDARD)
JIS B 4703:1966
Files (FOREIGN STANDARD)
JIS B 4652:2008
Hand torque tools -- Requirements and test methods (Foreign Standard)
JIS B 4651:1998
Combination wrenches (FOREIGN STANDARD)
JIS B 4648:2008
Hexagon socket screw keys (Foreign Standard)
JIS B 4636-2:1998
Socket wrenches -- 6.3 - 25 square drive (FOREIGN STANDARD)
JIS B 4636-1:1998
Socket wrenches -- 12.7 mm square drive (FOREIGN STANDARD)
JIS B 4635:2002
Heavy duty cutting nippers (FOREIGN STANDARD)
JIS B 4633:1998
Screwdrivers for cross recessed head screws (FOREIGN STANDARD)
JIS B 4632:1998
Offset wrenches (FOREIGN STANDARD)
JIS B 4631:1998
Round nose chain pliers with side cutters (FOREIGN STANDARD)
JIS B 4630:1998
Open ended spanners (FOREIGN STANDARD)
JIS B 4627:1994
Hand riveter (FOREIGN STANDARD)
JIS B 4624:1998
Round nose pliers (FOREIGN STANDARD)
JIS B 4623:1998
Cutting pliers (FOREIGN STANDARD)
JIS B 4609:1998
Screwdrivers for slotted-head screws (FOREIGN STANDARD)
JIS B 4604:1998
Adjustable angle wrenches (FOREIGN STANDARD)
JIS B 4502:1996/AMENDMENT 1:2009
Thread rolling flat dies (Amendment 1) (Foreign Standard)
JIS B 4502:1996
Thread rolling flat dies (FOREIGN STANDARD)
JIS B 4501:1996/AMENDMENT 1:2009
Thread rolling cylindrical dies (Amendment 1) (Foreign Standard)
JIS B 4501:1996
Thread rolling cylindrical dies (FOREIGN STANDARD)
JIS B 4433:1990
Nut taps (FOREIGN STANDARD)
JIS B 4430:1998
Short machine taps and hand taps for metric threads (FOREIGN STANDARD)
JIS B 4239:1999/AMENDMENT 1:2009
Involute spline broaches (Amendment 1) (Foreign Standard)
JIS B 4239:1999
Involute spline broaches (FOREIGN STANDARD)
JIS B 4238:1999/AMENDMENT 1:2009
Keyway Broaches (Amendment 1) (Foreign Standard)
JIS B 4238:1999
Keyway broaches (FOREIGN STANDARD)
JIS B 4237:1987
Dimensions of pull and follower ends of broach (FOREIGN STANDARD)
JIS B 4236:1998/AMENDMENT 1:2009
Milling cutters -- Counterbores for hexagon socket head bolts (Amendment 1) (Foreign Standard)
JIS B 4236:1998
Milling cutters -- Counterbores for hexagon socket head bolts (FOREIGN STANDARD)
JIS B 4220:1988/AMENDMENT 1:2009
Screw Slotting Cutters (Amendment 1) (Foreign Standard)
JIS B 4220:1988
Screw slotting cutters (FOREIGN STANDARD)
JIS B 4213:1996/AMENDMENT 1:2009
Tapered end mills for trapeziform runner with parallel shanks (Amendment 1) (Foreign Standard)
JIS B 4213:1996
Tapered end mills for trapeziform runner with parallel shanks (FOREIGN STANDARD)
JIS B 4210:1997/AMENDMENT 1:2009
Tapered end mills (Amendment 1) (Foreign Standard)
JIS B 4210:1997
Tapered end mills (FOREIGN STANDARD)
JIS B 4152:1988
High speed steel tipped tools (FOREIGN STANDARD)
JIS B 4140:2006
Diamond/CBN products -- Diamond or CBN electroplated tools (FOREIGN STANDARD)
JIS B 4140:1997
Diamond or cubic boron nitride electroplated tools (FOREIGN STANDARD)
JIS B 4134:1994
Single point diamond dressing tools (FOREIGN STANDARD)
JIS B 4052:2008
Recommendation of wheels for free hand grinding (FOREIGN STANDARD)
JIS B 4051:2008
Recommendation of grinding wheels (FOREIGN STANDARD)
JIS B 4004:1966
1/10 tapers tool shanks (FOREIGN STANDARD)
JIS B 3521:2004
Protocol specification for FA control network standard (FOREIGN STANDARD)
JIS B 3502:2004
Programmable controllers -- Equipment requirements and tests (FOREIGN STANDARD)
JIS B 3501:2004
Programmable controllers -- Part 1: General information (FOREIGN STANDARD)
JIS B 2711:2005
Shot peening (FOREIGN STANDARD)
JIS B 0952:1999
Machine tool tables -- T-slots and corresponding bolts (FOREIGN STANDARD)
JIS B 0951:1962
Knurling (FOREIGN STANDARD)
JIS B 0712:1969
Stock allowance for finish cut (FOREIGN STANDARD)
JIS B 0702:1977
Radius of machine parts (press working of sheet metals) (FOREIGN STANDARD)
JIS B 0410:1991
General tolerances for parts formed by shear from metal plates (FOREIGN STANDARD)
JIS B 0408:1991
General dimensional tolerances for parts formed by press working from sheet metal (FOREIGN STANDARD)
JSA ICS 29, Electrical engineering
JIS K 7194:1994
Testing method for resistivity of conductive plastics with a four-point probe array (FOREIGN STANDARD)
JIS H 7205:2003
Method of measuring discharge capacity of hydrogen absorbing alloys for a negative electrode of a rechargable nickel-metal hydride battery (FOREIGN STANDARD)
JIS H 4541:1997/AMENDMENT 1:2009
Dumet wires (Amendment 1) (Foreign Standard)
JIS H 4541:1997
Dumet wires (FOREIGN STANDARD)
JIS H 4463:2002
Thoriated tungsten wires and rods for lighting and electronic equipment (FOREIGN STANDARD)
JIS H 4461:2002
Tungsten wires for lighting and electronic equipments (FOREIGN STANDARD)
JIS H 4460:2002
General rules for test of tungsten and molybdenum materials for lighting and electronic equipments (FOREIGN STANDARD)
JIS H 0610:1966
Method of measurement of etch pit density of germanium crystal (FOREIGN STANDARD)
JIS H 0607:1978
Determination of conductivity type in germanium by thermoelectromotive method (FOREIGN STANDARD)
JIS H 0604:1995
Measuring of minority-carrier lifetime in silicon single crystal by photoconductive decay method (FOREIGN STANDARD)
JIS H 0603:1978
Measurement of minority carrier life time in germanium by photoconductive decay method (FOREIGN STANDARD)
JIS H 0601:1962
Testing methods of resistivity for germanium (FOREIGN STANDARD)
JIS E 2102:1990
Hard-drawn copper round trolley wires (FOREIGN STANDARD)
JIS E 2101:1990
Hard-drawn grooved trolley wires (FOREIGN STANDARD)
JIS D 5500:1995
Automobile parts -- Lighting and light signalling devices (FOREIGN STANDARD)
JIS D 5301:2006
Lead-acid starter batteries (FOREIGN STANDARD)
JIS D 1619:1977
Photometric testing methods of lighting and signalling equipment for automobiles (FOREIGN STANDARD)
JIS D 1304:2004
Electric vehicle -- Charging system -- Test method of efficiency (FOREIGN STANDARD)
JIS D 1303:2004
Electric vehicles -- Batteries -- Test method of charging efficiency (FOREIGN STANDARD)
JIS D 1302:2004
Electric vehicle -- Electric motors -- Test method of maximum power (FOREIGN STANDARD)
JIS C 9711:1997
Compression tools for wire connectors of interior wiring (FOREIGN STANDARD)
JIS C 8714:2007
Safety tests for portable Lithium Ion secondary cells and batteries for use in portable electronic applications (FOREIGN STANDARD)
JIS C 8708:2007
Sealed nickel-metal hydride rechargeable single cells (FOREIGN STANDARD)
JIS C 8706:2003
Stationary nickel-cadmium rechargeable single cells (FOREIGN STANDARD)
JIS C 8701:1975
Lead acid batteries for general service (FOREIGN STANDARD)
JIS C 8514:2007
Safety of primary batteries with aqueous electrolyte (FOREIGN STANDARD)
JIS C 8511:2004
Alkaline primary batteries (FOREIGN STANDARD)
JIS C 8501:2004
Carbon zinc batteries (FOREIGN STANDARD)
JIS C 8472:2005
Lighting busways -- Particular safety requirements for luminaires use (FOREIGN STANDARD)
JIS C 8461-23:2005
Conduit systems for cable management -- Part 23: Particular requirements -- Flexible conduit systems (FOREIGN STANDARD)
JIS C 8461-22:2005
Conduit systems for cable management -- Part 22: Particular requirements -- Pliable conduit systems (FOREIGN STANDARD)
JIS C 8461-21:2005
Conduit systems for cable management -- Part 21: Particular requirements -- Rigid conduit systems (FOREIGN STANDARD)
JIS C 8461-1:2005
Conduit systems -- Part 1: General requirements (FOREIGN STANDARD)
JIS C 8425:1984
Plastic surface raceways for interior wiring (FOREIGN STANDARD)
JIS C 8412:1999/AMENDMENT 1:2006
Fittings for pliable plastics conduits (Amendment 1) (FOREIGN STANDARD)
JIS C 8412:1999
Fittings for pliable plastics conduits (FOREIGN STANDARD)
JIS C 8411:1999
Pliable plastics conduits (FOREIGN STANDARD)
JIS C 8380:1993
Plastic coated steel pipes for cable-ways (FOREIGN STANDARD)
JIS C 8375:1992
Mounting frame for interchangeable wiring divices of large square boss type (FOREIGN STANDARD)
JIS C 8374:1991
Residual current sensing and relaying equipment (FOREIGN STANDARD)
JIS C 8369:2006
Photoelectric controls for public lighting (FOREIGN STANDARD)
JIS C 8368:1996
Current limiters (FOREIGN STANDARD)
JIS C 8365:1997
Junction box for indoor wiring (for 600 V polyvinyl chloride insulated and sheathed cables:VVF) (FOREIGN STANDARD)
JIS C 8364:2008
Busways (Foreign Standard)
JIS C 8361:1984
Remote control transformers (FOREIGN STANDARD)
JIS C 8360:1984
Remote control relays and remote control switches (FOREIGN STANDARD)
JIS C 8358:1994
Appliance couplers for domestic and similar use (FOREIGN STANDARD)
JIS C 8352:1983
General requirements for fuses for the protection of low-voltage cables and lines (FOREIGN STANDARD)
JIS C 8328:2003
Low voltage panelboards for household use (FOREIGN STANDARD)
JIS C 8319:1983/AMENDMENT 1:2007
Particular requirements for screw fuses and D-type fuses (Amendment 1) (FOREIGN STANDARD)
JIS C 8319:1983
Particular requirements for screw fuses and D-type fuses (FOREIGN STANDARD)
JIS C 8314:1983/AMENDMENT 1:2007
Particular requirements for low-voltage cartridge fuses (Amendment 1) (FOREIGN STANDARD)
JIS C 8314:1983
Particular requirements for low-voltage cartridge fuses (FOREIGN STANDARD)
JIS C 8313:1983
Particular requirements for link-fuses (FOREIGN STANDARD)
JIS C 8310:2000
Ceiling rosettes (FOREIGN STANDARD)
JIS C 8306:1996
Testing methods for wiring devices (FOREIGN STANDARD)
JIS C 8305:1999
Rigid steel conduits (FOREIGN STANDARD)
JIS C 8303:2007
Plugs and receptacles for domestic and similar general use (FOREIGN STANDARD)
JIS C 8302:1995/AMENDMENT 1:2009
Edison screw lampholders (Amendment 1) (Foreign Standard)
JIS C 8302:1995
Edison screw lampholders (FOREIGN STANDARD)
JIS C 8281-2-1:2004
Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements -- Electronic switches (FOREIGN STANDARD)
JIS C 8211:2004
Circuit-breakers for overcurrent protection for household and similar installations (FOREIGN STANDARD)
JIS C 8201-2-2:2004
Low-voltage switchgear and controlgear -- Part 2-2: Circuit-breakers incorporating residual current protection (FOREIGN STANDARD)
JIS C 8119:2008
Ballasts for discharge lamps (excluding tubular fluorescent lamps) -- Performance requirements (Foreign Standard)
JIS C 8118:2008
Ballasts for tubular fluorescent lamps -- Performance requirements (Foreign Standard)
JIS C 8117:2008
AC supplied electronic ballasts for fluorescent lamps (Foreign Standard)
JIS C 8115:2008
Fluorescent lamp luminaires for residential lighting (Foreign Standard)
JIS C 8112:2008
Fluorescent table study lamps (Foreign Standard)
JIS C 8108:2008
Ballasts for fluorescent lamps (Foreign Standard)
JIS C 8106:2008
Fluorescent lamp luminaires for commercial, industrial and public lighting (Foreign Standard)
JIS C 8105-3:2006
Luminaires -- Part 3: General requirements for performance (FOREIGN STANDARD)
JIS C 8105-2-4:2003
Luminaires -- Part 2: Particular requirements for safety -- Section 4: Portable general purpose luminaires (FOREIGN STANDARD)
JIS C 8105-2-3:2005
Luminaires -- Part 2-3: Particular requirements for safety -- Luminaires for road and street lighting (FOREIGN STANDARD)
JIS C 8105-2-23:2004
Luminaires -- Part 2-23: Particular requirements -- Extra low voltage lighting systems for filament lamps (FOREIGN STANDARD)
JIS C 8105-2-2:2003
Luminaires -- Part 2: Particular requirements for safety -- Section 2: Recessed luminaires (FOREIGN STANDARD)
JIS C 8104:1991
Hand lanterns (FOREIGN STANDARD)
JIS C 7711:1991
Designation method for mounted filaments of incandescent tungsten lamps (FOREIGN STANDARD)
JIS C 7710:1988
Designation method for glass bulbs of lamps (FOREIGN STANDARD)
JIS C 7708:1984
Glass tubing for fluorescent lamps (FOREIGN STANDARD)
JIS C 7622:2002
Glow-Starters for fluorescent lamps -- Performance specification (FOREIGN STANDARD)
JIS C 7620-2:2004
Self-ballasted fluorescent lamps -- Part 2: Performance specifications (FOREIGN STANDARD)
JIS C 7620-1:2000
Self-ballasted lamps for general lighting service -- Part 1: Safety requirement (FOREIGN STANDARD)
JIS C 7615:1973
Neon tubings (FOREIGN STANDARD)
JIS C 7613:1985
Photometric measurements on incandescent lamps used for photometric standards (FOREIGN STANDARD)
JIS C 7610:1991
Low pressure sodium vapour lamps (FOREIGN STANDARD)
JIS C 7607:1991
Total luminous flux measurements on discharge lamps used for photometric standards (FOREIGN STANDARD)
JIS C 7606:1985
Negative-glow lamps (FOREIGN STANDARD)
JIS C 7605:1995
Low pressure mercury germicidal discharge lamps (FOREIGN STANDARD)
JIS C 7604:2006
High-pressure mercury vapour lamps -- Performance specifications (FOREIGN STANDARD)
JIS C 7530:1999
Ball lamps (FOREIGN STANDARD)
JIS C 7528:1996/AMENDMENT 1:2009
Traffic signal lamps (Amendment 1) (Foreign Standard)
JIS C 7528:1996
Traffic signal lamps (FOREIGN STANDARD)
JIS C 7526:1990
Standard incandescent lamps of luminous intensity (FOREIGN STANDARD)
JIS C 7523:2000
Small lamps for household use (FOREIGN STANDARD)
JIS C 7516:1992
Indicator lamps (FOREIGN STANDARD)
JIS C 7508:1996/AMENDMENT 1:2009
Torch lamps (Amendment 1) (Foreign Standard)
JIS C 7508:1996
Torch lamps (FOREIGN STANDARD)
JIS C 7503:1990
Lamps for railway (FOREIGN STANDARD)
JIS C 7501:2000
Tungsten filament lamps for general lighting purposes (FOREIGN STANDARD)
JIS C 6575-3:2005
Miniature fuses -- Part 3: Sub-miniature fuse-link (FOREIGN STANDARD)
JIS C 6575-2:2005
Miniature fuses -- Part 2: Cartridge fuse-links (FOREIGN STANDARD)
JIS C 6436:1995
Power transformer for electronic equipment (FOREIGN STANDARD)
JIS C 6435:1989
Testing methods for low frequency transformers and inductors (FOREIGN STANDARD)
JIS C 6421:1994
Intermediate frequency transformers for broadcast receiver (FOREIGN STANDARD)
JIS C 5442:1996
Test methods of low power electromagnetic relays for industrial control circuits (FOREIGN STANDARD)
JIS C 5381-21:2004
Surge protective devices connected to telecommunications and signalling networks -- Performance requirements and testing methods (FOREIGN STANDARD)
JIS C 5381-12:2004
Surge protective devices connected to low-voltage power distribution systems -- Selection and application principles (FOREIGN STANDARD)
JIS C 5321:1997
Methods of test for high frequency inductors and intermediate frequency transformers for electronic equipment (FOREIGN STANDARD)
JIS C 5320:1994
General rules of high frequency coils and intermediate frequency transformers for electronic equipment (FOREIGN STANDARD)
JIS C 5311:1994
Testing methods of power transformers for electronic equipment (FOREIGN STANDARD)
JIS C 5310:1997
Generic specification of transformers for electronic equipment (FOREIGN STANDARD)
JIS C 4906:1991
Synchros (FOREIGN STANDARD)
JIS C 4620:2004
Cubicle type high voltage power receiving units (FOREIGN STANDARD)
JIS C 4609:1990
Directional ground relay set for 6.6 kV consumer (FOREIGN STANDARD)
JIS C 4606:1993
6.6 kV disconnectors for indoor use (FOREIGN STANDARD)
JIS C 4605:1998
AC load break switches for 3.3 kV or 6.6 kV (FOREIGN STANDARD)
JIS C 4604:1988
High-voltage current-limiting fuses (FOREIGN STANDARD)
JIS C 4603:1990
AC circuit breakers for 3.3 kV or 6.6 kV (FOREIGN STANDARD)
JIS C 4602:1986
Overcurrent relays for 6.6 kV receiving (FOREIGN STANDARD)
JIS C 4601:1993
Ground relay set for 6.6 kV consumer (FOREIGN STANDARD)
JIS C 4554:1984
AC solenoids for general purpose (FOREIGN STANDARD)
JIS C 4553:1984
DC solenoids for general purpose (FOREIGN STANDARD)
JIS C 4552:1984
General rules for solenoids (plunger type) (FOREIGN STANDARD)
JIS C 4530:1996
Hinge type electromagnetic relays (FOREIGN STANDARD)
JIS C 4523:1985
Control reed relays (FOREIGN STANDARD)
JIS C 4510:1991
Hook bars for disconnecting switch operation (FOREIGN STANDARD)
JIS C 4501:1977
Explosion-proof type plug connection devices for coal mines (FOREIGN STANDARD)
JIS C 4411-3:2004
Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance and test requirements (FOREIGN STANDARD)
JIS C 4402:2004
Thyristor rectifiers for floating charge (FOREIGN STANDARD)
JIS C 4212:2000
Low-voltage three-phase squirrel-cage high efficiency induction motors (FOREIGN STANDARD)
JIS C 4210:2001
Low-voltage three-phase squirrel-cage induction motors for general purpose (FOREIGN STANDARD)
JIS C 4203:2001
Single phase induction motors for general purpose (FOREIGN STANDARD)
JIS C 4003:1998
Thermal evaluation and classification of electrical insulation (FOREIGN STANDARD)
JIS C 3840:1975
Knob insulators (FOREIGN STANDARD)
JIS C 3825:1977
Neon insulators (FOREIGN STANDARD)
JIS C 3821:1992
6600 V pin type insulators (FOREIGN STANDARD)
JIS C 3812:1999
Line post insulators (FOREIGN STANDARD)
JIS C 3810:1999
Normal type and anti-pollution type suspension insulators (FOREIGN STANDARD)
JIS C 3802:1964
Permissible limits of visual defects for insulating porcelains (FOREIGN STANDARD)
JIS C 3801-3:1999
Testing method for insulators -- Part 3: Hollow insulators (FOREIGN STANDARD)
JIS C 3801-2:1999
Testing method for insulators -- Part 2: Post insulators for station (FOREIGN STANDARD)
JIS C 3801-1:1999
Testing method for insulators -- Part 1: Insulators for overhead line (FOREIGN STANDARD)
JIS C 3663-8:2003
Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 8: Cords for applications requiring high flexibility (FOREIGN STANDARD)
JIS C 3663-5:2007
Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 5: Lift cables (FOREIGN STANDARD)
JIS C 3663-4:2007
Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 4: Cords and flexible cables (Foreign Standard)
JIS C 3663-3:2003
Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 3: Heat resistant silicone insulated cables (FOREIGN STANDARD)
JIS C 3663-2:2003
Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 2: Test methods (FOREIGN STANDARD)
JIS C 3663-1:2007
Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 1: General requirements (Foreign Standard)
JIS C 3662-7:2003
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 7: Flexible cables screened and unscreened with two or more conductors (FOREIGN STANDARD)
JIS C 3662-6:2003
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 6: Lift cables and cables for flexible connections (FOREIGN STANDARD)
JIS C 3662-4:2003
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 4: Sheathed cables for fixed wiring (FOREIGN STANDARD)
JIS C 3662-3:2003
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring (FOREIGN STANDARD)
JIS C 3662-2:2003
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 2: Test methods (FOREIGN STANDARD)
JIS C 3662-1:2003
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 1: General requirements (FOREIGN STANDARD)
JIS C 3660-3-1:2003
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 3-1: Methods specific to PVC compounds -- Pressure test at high temperature -- Test for resistance to cracking (FOREIGN STANDARD)
JIS C 3660-2-1:2003
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 2-1: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests (FOREIGN STANDARD)
JIS C 3660-1-4:2003
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-4: Methods for general application -- Test at low temperature (FOREIGN STANDARD)
JIS C 3660-1-3:2003
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-3: Methods for general application -- Methods for determining the density -- Water absorption tests -- Shrinkage test (FOREIGN STANDARD)
JIS C 3660-1-2:2003
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-2: Methods for general application -- Thermal ageing methods (FOREIGN STANDARD)
JIS C 3660-1-1:2003
Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-1: Methods for general application -- Measurement of thickness and overall dimensions -- Tests for determining the mechanical properties
JIS C 3612:2002
600V Flame retardant polyethylene insulated wires (FOREIGN STANDARD)
JIS C 3611:1991
Insulated wires for cubicle type unit substation for 6.6 kV receiving (FOREIGN STANDARD)
JIS C 3605:2002
600V Polyethylene insulated cables (FOREIGN STANDARD)
JIS C 3521:1986
Flame test method for flame retardant sheath of telecommunication cables (FOREIGN STANDARD)
JIS C 3410:1999
Cables and flexible cords for electrical equipment of ships (FOREIGN STANDARD)
JIS C 3408:2000
Travelling cables for elevators (FOREIGN STANDARD)
JIS C 3406:1993
Low-voltage cables for automobiles (FOREIGN STANDARD)
JIS C 3405:1998
Road vehicles -- High tension cables (FOREIGN STANDARD)
JIS C 3401:2002
Control cables (FOREIGN STANDARD)
JIS C 3342:2000
600 V Polyvinyl chloride insulated and sheathed cables (FOREIGN STANDARD)
JIS C 3341:2000
Polyvinyl chloride insulated drop service wires (FOREIGN STANDARD)
JIS C 3340:2000
Outdoor weatherproof polyvinyl chloride insulated wires (FOREIGN STANDARD)
JIS C 3317:2000
600 V Grade heat-resistant polyvinyl chloride insulated wires (FOREIGN STANDARD)
JIS C 3316:2000/AMENDMENT 1:2008
Polyvinyl chloride insulated wires for electrical apparatus (Amendment 1) (Foreign Standard)
JIS C 3316:2000
Polyvinyl chloride insulated wires for electrical apparatus (FOREIGN STANDARD)
JIS C 3307:2000
600 V Polyvinyl chloride insulated wires (FOREIGN STANDARD)
JIS C 3306:2000
Polyvinyl chloride insulated flexible cords (FOREIGN STANDARD)
JIS C 3301:2000
Rubber insulated flexible cords (FOREIGN STANDARD)
JIS C 3204:1988
Fiber or paper covered copper winding wires (FOREIGN STANDARD)
JIS C 3202:1994
Enamelled winding wires (FOREIGN STANDARD)
JIS C 3152:1984
Tin coated annealed copper wires (FOREIGN STANDARD)
JIS C 3109:1994
Hard-drawn aluminium stranded conductors (FOREIGN STANDARD)
JIS C 3108:1994
Hard-drawn aluminium wires for electric purposes (FOREIGN STANDARD)
JIS C 3106:1976
Copper wire rods for electrical purposes (FOREIGN STANDARD)
JIS C 3105:1994
Hard-drawn copper stranded conductors (FOREIGN STANDARD)
JIS C 3104:1994
Rectangular copper wires for electrical purposes (FOREIGN STANDARD)
JIS C 3103:1984
Annealed copper wires for winding wires (FOREIGN STANDARD)
JIS C 3102:1984
Annealed copper wires for electrical purposes (FOREIGN STANDARD)
JIS C 3101:1994
Hard-drawn copper wires for electrical purposes (FOREIGN STANDARD)
JIS C 3053:1988
General rules for winding wires (FOREIGN STANDARD)
JIS C 3006:1999
Methods of test for fiber or paper insulated wires (FOREIGN STANDARD)
JIS C 3003:1999
Methods of test for enamelled wires (FOREIGN STANDARD)
JIS C 3002:1992
Testing methods of electrical copper and aluminium wires (FOREIGN STANDARD)
JIS C 3001:1981
Resistance of copper materials for electrical purposes (FOREIGN STANDARD)
JIS C 2820:2008
Test procedures for determining physical properties of brush materials for electrical machines (Foreign Standard)
JIS C 2813:1992/AMENDMENT 1:2009
Spring pressure type wire connectors for electrical installations of buildings (Amendment 1) (Foreign Standard)
JIS C 2813:1992
Spring pressure type wire connectors for electrical installations of buildings (FOREIGN STANDARD)
JIS C 2812:1998
Mounting rails for devices (FOREIGN STANDARD)
JIS C 2811:1995
Terminal blocks for industrial and similar use (FOREIGN STANDARD)
JIS C 2810:1995
General rules on non-separable type wire connectors for interior wiring (FOREIGN STANDARD)
JIS C 2807:2003
Insulated closed-end connectors (FOREIGN STANDARD)
JIS C 2806:2003
Non-insulated crimp-type sleeves for copper conductors (FOREIGN STANDARD)
JIS C 2805:2003
Crimp-type terminal lugs for copper conductors (FOREIGN STANDARD)
JIS C 2802:2003
Dimensions of brushes for electric machines (FOREIGN STANDARD)
JIS C 2801:1995
Commutator bars (FOREIGN STANDARD)
JIS C 2569:1998
Ring cores made of ferromagnetic oxide (FOREIGN STANDARD)
JIS C 2565:1992
Measuring methods for ferrite cores for microwave devices (FOREIGN STANDARD)
JIS C 2560:1992
General rules for ferrite cores (FOREIGN STANDARD)
JIS C 2556:1996
Methods of measurement of the magnetic properties of magnetic steel sheet and strip by means of a single sheet tester (FOREIGN STANDARD)
JIS C 2555:2000
Steel sheets and strip for pole core (FOREIGN STANDARD)
JIS C 2553:2000
Grain-oriented magnetic steel sheet and strip (FOREIGN STANDARD)
JIS C 2552:2000
Non-oriented magnetic steel sheet and strip (FOREIGN STANDARD)
JIS C 2550:2000
Test methods for magnetic steel sheet and strip (FOREIGN STANDARD)
JIS C 2532:1999
Electrical resistance wires, ribbons and sheets for general use (FOREIGN STANDARD)
JIS C 2531:1999
Nickel iron soft magnetic metallic materials (FOREIGN STANDARD)
JIS C 2529:1991
Enamelled wires and oleo-resinous enamelled silk covered wires for electrical resistance use (FOREIGN STANDARD)
JIS C 2528:1991
Silk and polyester fiber covered wires for electrical resistance use (FOREIGN STANDARD)
JIS C 2527:1994
Testing method for thermo-electromotive force of metallic resistance materials (FOREIGN STANDARD)
JIS C 2526:1994
Testing method for electrical resistance-temperature characteristics of metallic resistance materials (FOREIGN STANDARD)
JIS C 2525:1999
Testing method for conductor-resistance and resistivity of metallic resistance materials (FOREIGN STANDARD)
JIS C 2523:1990
Oxidized copper-nickel alloy wires for electrical resistance use (FOREIGN STANDARD)
JIS C 2522:1999
Copper-manganese alloy wires, bars and sheets for electrical resistance (FOREIGN STANDARD)
JIS C 2521:1999
Copper-nickel alloy wires, rolled wires, ribbons and sheets for electrical resistance (FOREIGN STANDARD)
JIS C 2520:1999
Wires and rolled wires for electrical heating (FOREIGN STANDARD)
JIS C 2516:1990
Pot-cores made of ferromagnetic oxide (FOREIGN STANDARD)
JIS C 2507:1990
Tin coated non-magnetic steel wire for armature binding (FOREIGN STANDARD)
JIS C 2504:2000
Soft magnetic irons (FOREIGN STANDARD)
JIS C 2502:1998
Materials for permanent magnet (FOREIGN STANDARD)
JIS C 2501:1998
Methods of test for permanent magnet (FOREIGN STANDARD)
JIS C 2336:1999
Pressure-sensitive adhesive polyvinyl chloride tapes for electrical purposes (FOREIGN STANDARD)
JIS C 2320:1999
Electrical insulating oils (FOREIGN STANDARD)
JIS C 2318:2007
Balanced biaxially oriented polyethylene terephthalate films used for electrical purposes (FOREIGN STANDARD)
JIS C 2307:1999
Insulating papers for electric power cables (FOREIGN STANDARD)
JIS C 2305:1999
Pressboard for electrical purposes (FOREIGN STANDARD)
JIS C 2304:1999
Coil insulating papers (FOREIGN STANDARD)
JIS C 2303:1999
Insulating tissue papers (FOREIGN STANDARD)
JIS C 2255:1992
Flexible mica materials (FOREIGN STANDARD)
JIS C 2254:2004
Rigid mica materials for electric heating equipment (FOREIGN STANDARD)
JIS C 2250:2008
General rules for electrical insulating mica products (FOREIGN STANDARD)
JIS C 2161:1997
Test methods of coating powders for electrical insulation (FOREIGN STANDARD)
JIS C 2151:2006
Testing methods of plastic films for electrical purposes (FOREIGN STANDARD)
JIS C 2141:1992
Testing methods of ceramic insulators for electrical and electronic applications (FOREIGN STANDARD)
JIS C 0950:2008
The marking for presence of the specific chemical substances for electrical and electronic equipment (FOREIGN STANDARD)
JIS C 0705:1996
General rules of color identification for external lead wire of control gear with external lead wire (FOREIGN STANDARD)
JIS C 0704:1995
Insulation test for control gear (FOREIGN STANDARD)
JIS C 0446:1999
Identification of conductors by colours or numerals (FOREIGN STANDARD)
JIS C 0303:2000
Graphical symbols of wiring diagram for architectural plans (FOREIGN STANDARD)
JIS B 9960-32:2004
Safety of machinery -- Electrical equipment of machines -- Part 32: Requirements for hoisting machines (FOREIGN STANDARD)


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment

Post a Comment