2009/09/07

Cheapest & Latest ISO Standard (PDF) (30)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


77: Metallurgy

ICS Field
77.020 Production of metals
ISO 197-5:1980
Copper and copper alloys -- Terms and definitions -- Part 5: Methods of processing and treatment 90.20 TC 26
ISO 3134-5:1981
Light metals and their alloys -- Terms and definitions -- Part 5: Methods of processing and treatment 90.92 TC 79

77.040 Testing of metals
77.040.01 Testing of metals in general
77.040.10 Mechanical testing of metals
Mechanical testing in general, see 19.060
Mechanical testing of welded joints, see 25.160.40
Standard and/or project TC
ISO/FDIS 148-1
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method 50.20 TC 164/SC 4
ISO 148-1:2006
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method 90.92 TC 164/SC 4
ISO 148-2:2008
Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines 60.60 TC 164/SC 4
ISO 148-3:2008
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines 60.60 TC 164/SC 4
ISO 204:2009
Metallic materials -- Uniaxial creep testing in tension -- Method of test 60.60 TC 164/SC 1
ISO 376:2004
Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines 90.92 TC 164/SC 1
ISO/DIS 376
Metallic material -- Calibration of force-proving instruments used for the verification of uniaxial testing machines 40.20 TC 164/SC 1
ISO 377:1997
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing 90.60 TC 17/SC 20
ISO 377:1997/Cor 1:1997
60.60 TC 17/SC 20
ISO 783:1999
Metallic materials -- Tensile testing at elevated temperature 90.92 TC 164/SC 1
ISO 946:1975
Grey cast iron -- Beam unnotched impact test 90.60 TC 25
ISO 1099:2006
Metallic materials -- Fatigue testing -- Axial force-controlled method 90.20 TC 164/SC 5
ISO 1143:1975
Metals -- Rotating bar bending fatigue testing 90.92 TC 164/SC 5
ISO/DIS 1143
Metallic materials -- Rotating bar bending fatigue testing 40.20 TC 164/SC 5
ISO/DIS 1352
Metallic materials -- Torque-controlled fatigue testing 40.20 TC 164/SC 5
ISO 1352:1977
Steel -- Torsional stress fatigue testing 90.92 TC 164/SC 5
ISO 2566-1:1984
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels 90.20 TC 17/SC 20
ISO 2566-2:1984
Steel -- Conversion of elongation values -- Part 2: Austenitic steels 90.20 TC 17/SC 20
ISO 2739:2006
Sintered metal bushes -- Determination of radial crushing strength 90.92 TC 119/SC 3
ISO 2740:2009
Sintered metal materials, excluding hardmetals -- Tensile test pieces 60.60 TC 119/SC 3
ISO 3312:1987
Sintered metal materials and hardmetals -- Determination of Young modulus 90.20 TC 119/SC 3
ISO 3325:1996
Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength 90.93 TC 119/SC 3
ISO 3325:1996/Amd 1:2001
Precision statement 60.60 TC 119/SC 3
ISO 3327:2009
Hardmetals -- Determination of transverse rupture strength 60.60 TC 119/SC 4
ISO 3738-1:1982
Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method 90.93 TC 119/SC 4
ISO 3738-2:1988
Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks 90.93 TC 119/SC 4
ISO 3785:2006
Metallic materials -- Designation of test specimen axes in relation to product texture 90.60 TC 164/SC 4
ISO 3878:1983
Hardmetals -- Vickers hardness test 90.93 TC 119/SC 4
ISO 3928:1999
Sintered metal materials, excluding hardmetals -- Fatigue test pieces 90.92 TC 119/SC 3
ISO 3995:1985
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts 90.60 TC 119/SC 2
ISO 4498:2005
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness 90.93 TC 119/SC 3
ISO 4498-1:1990
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 1: Materials of essentially uniform section hardness 90.93 TC 119/SC 3
ISO 4498-2:1981
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen 90.93 TC 119/SC 3
ISO 4506:1979
Hardmetals -- Compression test 90.93 TC 119/SC 4
ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth by a micro-hardness test 90.93 TC 119/SC 3
ISO 4545-1:2005
Metallic materials -- Knoop hardness test -- Part 1: Test method 90.60 TC 164/SC 3
ISO 4545-2:2005
Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 4545-3:2005
Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 4545-4:2005
Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values 90.60 TC 164/SC 3
ISO 4739:1985
Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing 90.20 TC 26
ISO 4965:1979
Axial load fatigue testing machines -- Dynamic force calibration -- Strain gauge technique 90.92 TC 164/SC 5
ISO/CD 4965-1
Metallic materials -- Fatigue testing -- Uniaxial dynamic force calibration -- Part 1: Testing machine 30.00 TC 164/SC 5
ISO/CD 4965-2
Metallic materials -- Fatigue testing -- Uniaxial dynamic force calibration -- Part 2: Dynamic Calibration Device (DCD) instrumentation 30.00 TC 164/SC 5
ISO 5754:1978
Sintered metal materials, excluding hardmetals -- Unnotched impact test piece 90.20 TC 119/SC 3
ISO 6506-1:2005
Metallic materials -- Brinell hardness test -- Part 1: Test method 90.60 TC 164/SC 3
ISO 6506-2:2005
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 6506-3:2005
Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 6506-4:2005
Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values 90.60 TC 164/SC 3
ISO 6507-1:2005
Metallic materials -- Vickers hardness test -- Part 1: Test method 90.60 TC 164/SC 3
ISO 6507-2:2005
Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 6507-3:2005
Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 6507-4:2005
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values 90.60 TC 164/SC 3
ISO 6508-1:2005
Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) 90.60 TC 164/SC 3
ISO 6508-2:2005
Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) 90.60 TC 164/SC 3
ISO 6508-3:2005
Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) 90.60 TC 164/SC 3
ISO 6892:1998
Metallic materials -- Tensile testing at ambient temperature 90.92 TC 164/SC 1
ISO 6892-1
Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature 60.00 TC 164/SC 1
ISO/DIS 6892-2
Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature 40.20 TC 164/SC 1
ISO 7438:2005
Metallic materials -- Bend test 90.93 TC 164/SC 2
ISO 7500-1:2004
Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system 90.60 TC 164/SC 1
ISO 7500-1:2004/Cor 1:2008
60.60 TC 164/SC 1
ISO 7500-2:2006
Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force 60.60 TC 164/SC 1
ISO 7799:1985
Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test 90.93 TC 164/SC 2
ISO 7800:2003
Metallic materials -- Wire -- Simple torsion test 90.92 TC 164/SC 2
ISO 7801:1984
Metallic materials -- Wire -- Reverse bend test 90.20 TC 164/SC 2
ISO 7802:1983
Metallic materials -- Wire -- Wrapping test 90.60 TC 164/SC 2
ISO 8491:1998
Metallic materials -- Tube (in full section) -- Bend test 90.93 TC 164/SC 2
ISO 8492:1998
Metallic materials -- Tube -- Flattening test 90.60 TC 164/SC 2
ISO 8493:1998
Metallic materials -- Tube -- Drift-expanding test 90.93 TC 164/SC 2
ISO 8494:1998
Metallic materials -- Tube -- Flanging test 90.60 TC 164/SC 2
ISO 8495:1998
Metallic materials -- Tube -- Ring-expanding test 90.60 TC 164/SC 2
ISO 8496:1998
Metallic materials -- Tube -- Ring tensile test 90.60 TC 164/SC 2
ISO/CD 9513
Metallic materials -- Calibration of extensometers used in uniaxial testing 30.60 TC 164/SC 1
ISO 9513:1999
Metallic materials -- Calibration of extensometers used in uniaxial testing 90.92 TC 164/SC 1
ISO 9649:1990
Metallic materials -- Wire -- Reverse torsion test 90.93 TC 164/SC 2
ISO/TR 10108:1989
Steel -- Conversion of hardness values to tensile strength values 60.60 TC 17/SC 20
ISO 10113:2006
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio 90.20 TC 164/SC 2
ISO 10275:2007
Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent 60.60 TC 164/SC 2
ISO 11531:1994
Metallic materials -- Earing test 90.93 TC 164/SC 2
ISO 12004-1:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop 60.60 TC 164/SC 2
ISO 12004-2:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory 60.60 TC 164/SC 2
ISO 12106:2003
Metallic materials -- Fatigue testing -- Axial-strain-controlled method 90.60 TC 164/SC 5
ISO/CD 12107
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data 30.99 TC 164/SC 5
ISO 12107:2003
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data 90.92 TC 164/SC 5
ISO 12108:2002
Metallic materials -- Fatigue testing -- Fatigue crack growth method 90.92 TC 164/SC 5
ISO/NP 12108
Metallic materials -- Fatigue testing -- Fatigue crack growth method 10.99 TC 164/SC 5
ISO/DIS 12111
Metallic materials -- Fatigue testing -- Strain-controlled thermomechanical fatigue testing method 40.60 TC 164/SC 5
ISO 12135:2002
Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness 90.93 TC 164/SC 4
ISO 12135:2002/Cor 1:2008
60.60 TC 164/SC 4
ISO/TR 12735-2:1996
Mechanical testing of metals -- Symbols used with their definitions -- Part 2: Recommendations for the development of symbols and definitions 60.60 TC 164
ISO 12737:2005
Metallic materials -- Determination of plane-strain fracture toughness 90.60 TC 164/SC 4
ISO/WD 13314
Metallic materials -- Sheet and strip -- Compression test of porous and cellular metals 20.20 TC 164/SC 2
ISO 14317:2006
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength 60.60 TC 119/SC 3
ISO 14556:2000
Steel -- Charpy V-notch pendulum impact test -- Instrumented test method 90.93 TC 164/SC 4
ISO 14556:2000/Amd 1:2006
Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces 60.60 TC 164/SC 4
ISO 14577-1:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method 90.60 TC 164/SC 3
ISO 14577-2:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 14577-3:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 14577-4:2007
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings 60.60 TC 164/SC 3
ISO/TR 14936:1998
Metallic materials -- Strain analysis report 60.60 TC 164/SC 2
ISO 15363:2000
Metallic materials -- Tube ring hydraulic pressure test 90.93 TC 164/SC 2
ISO/TR 15461:1997
Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests 60.60 TC 17/SC 10
ISO 15579:2000
Metallic materials -- Tensile testing at low temperature 90.92 TC 164/SC 1
ISO 16630:2009
Metallic materials -- Sheet and strip -- Hole expanding test 60.60 TC 164/SC 2
ISO 18265:2003
Metallic materials -- Conversion of hardness values 90.92 TC 164/SC 3
ISO 19819:2004
Metallic materials -- Tensile testing in liquid helium 90.92 TC 164/SC 1
ISO 20032:2007
Method for evaluation of tensile properties of metallic superplastic materials 60.60 TC 164/SC 2
ISO 20482:2003
Metallic materials -- Sheet and strip -- Erichsen cupping test 90.60 TC 164/SC 2
ISO/DIS 22394
Hardmetals -- Knoop hardness test 40.20 TC 119/SC 4
ISO 22889:2007
Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint 60.60 TC 164/SC 4
ISO 23718:2007
Metallic materials -- Mechanical testing -- Vocabulary 60.60 TC 164
ISO/NP 23788
Metallic materials -- Axial alignment of fatigue testing machines 10.99 TC 164/SC 5
ISO 24213:2008
Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending 60.60 TC 164/SC 2
ISO/TR 25679:2005
Mechanical testing of metals -- Symbols and definitions in published standards 60.60 TC 164
ISO/DIS 26203-1
Metallic materials -- Tensile testing method at high strain rates -- Part 1: Elastic bar type system 40.99 TC 164/SC 1
ISO/CD 26203-2
Metallic materials -- Tensile testing method at high strain rates -- Part 2: Servo-hydraulic and other test systems 30.99 TC 164/SC 1
ISO/FDIS 26843
Metallic materials -- Measurement of fracture toughness of steels at impact loading rates using precracked Charpy specimens 50.20 TC 164/SC 4
ISO 27306:2009
Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components 60.60 TC 164/SC 4
ISO 28079:2009
Hardmetals -- Palmqvist toughness test 60.60 TC 119/SC 4
ISO/CD 28080
Hardmetals -- Abrasion tests for hardmetals 30.92 TC 119/SC 4
ISO/TR 29381:2008
Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties 60.60 TC 164/SC 3

77.040.20 Non-destructive testing of metals
Non-destructive testing in general, see 19.100
Non-destructive testing of welded joints, see 25.160.40
Standard and/or project TC
ISO/DIS 4986
Steel and iron castings -- Magnetic particle inspection 40.99 TC 17/SC 11
ISO 4986:1992
Steel castings -- Magnetic particle inspection 90.92 TC 17/SC 11
ISO/DIS 4987
Steel and iron castings -- Liquid penetrant inspection 40.99 TC 17/SC 11
ISO 4987:1992
Steel castings -- Penetrant inspection 90.92 TC 17/SC 11
ISO 4992-1:2006
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes 90.60 TC 17/SC 11
ISO 4992-2:2006
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components 90.60 TC 17/SC 11
ISO 4993:2009
Steel and iron castings -- Radiographic inspection 60.60 TC 17/SC 11
ISO 5579:1998
Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules 90.60 TC 135/SC 5
ISO 5948:1994
Railway rolling stock material -- Ultrasonic acceptance testing 90.20 TC 17
ISO 6933:1986
Railway rolling stock material -- Magnetic particle acceptance testing 90.93 TC 17
ISO 9302:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 9303:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9304:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections 90.92 TC 17/SC 19
ISO 9305:1989
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9402:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9598:1989
Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9915:1992
Aluminium alloy castings -- Radiography testing 90.93 TC 79/SC 7
ISO 9916:1991
Aluminium alloy and magnesium alloy castings -- Liquid penetrant inspection 90.93 TC 79/SC 7
ISO 10049:1992
Aluminium alloy castings -- Visual method for assessing the porosity 90.93 TC 79/SC 7
ISO 10124:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 10332:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO/DIS 10332
Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness as a substitution for the hydraulic test 40.20 TC 17/SC 19
ISO 10543:1993
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing 90.92 TC 17/SC 19
ISO/DIS 10893-1
Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test 40.20 TC 17/SC 19
ISO/DIS 10893-2
Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-3
Non-destructive testing of steel tubes -- Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-4
Non-destructive testing of steel tubes -- Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-5
Non-destructive testing of steel tubes -- Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-7
Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-8
Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-9
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes 40.20 TC 17/SC 19
ISO/DIS 10893-10
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-12
Non-destructive testing of steel tubes -- Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 40.20 TC 17/SC 19
ISO 11484:2009
Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel 60.60 TC 17/SC 19
ISO 11496:1993
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 11971:2008
Steel and iron castings -- Visual examination of surface quality 60.60 TC 17/SC 11
ISO 12094:1994
Welded steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes 90.92 TC 17/SC 19
ISO 12095:1994
Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing 90.92 TC 17/SC 19
ISO 13664:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13665:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections 90.92 TC 17/SC 19
ISO 17577:2006
Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm 90.20 TC 17/SC 7
ISO 25902-1:2009
Titanium pipes and tubes -- Non-destructive testing -- Part 1: Eddy-current examination 60.60 TC 79/SC 11
ISO/DIS 25902-2
Titanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic examination for the detection of longitudinal flaws 40.60 TC 79/SC 11

77.040.30 Chemical analysis of metals
Chemical analysis in general, see 71.040.40
Chemical analysis of ferroalloys, see 77.100
Chemical analysis of ferrous metals, see 77.080
Chemical analysis of non-ferrous metals, see 77.120
Chemical analysis of sintered metals and hard metals, see 77.160
77.040.99 Other methods of testing of metals
Standard and/or project TC
ISO 196:1978
Wrought copper and copper alloys -- Detection of residual stress -- Mercury(I) nitrate test 90.20 TC 26
ISO 642:1999
Steel -- Hardenability test by end quenching (Jominy test) 90.93 TC 17/SC 7
ISO 643:2003
Steels -- Micrographic determination of the apparent grain size 60.60 TC 17/SC 7
ISO 2624:1990
Copper and copper alloys -- Estimation of average grain size 90.20 TC 26
ISO 2626:1973
Copper -- Hydrogen embrittlement test 90.20 TC 26
ISO 2639:2002
Steels -- Determination and verification of the depth of carburized and hardened cases 60.60 TC 17/SC 7
ISO 3326:1975
Hardmetals -- Determination of (the magnetization) coercivity 90.93 TC 119/SC 4
ISO 3754:1976
Steel -- Determination of effective depth of hardening after flame or induction hardening 90.93 TC 17/SC 7
ISO 3763:1976
Wrought steels -- Macroscopic methods for assessing the content of non-metallic inclusions 90.93 TC 17/SC 7
ISO 3887:2003
Steels -- Determination of depth of decarburization 60.60 TC 17/SC 7
ISO 4499-1:2008
Hardmetals -- Metallographic determination of microstructure -- Part 1: Photomicrographs and description 60.60 TC 119/SC 4
ISO 4499-2:2008
Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size 60.60 TC 119/SC 4
ISO 4505:1978
Hardmetals -- Metallographic determination of porosity and uncombined carbon 90.93 TC 119/SC 4
ISO/TR 4745:1978
High conductivity copper -- Spiral elongation test 90.60 TC 26
ISO 4746:1977
Oxygen-free copper -- Scale adhesion test 90.20 TC 26
ISO 4967:1998
Steel -- Determination of content of nonmetallic inclusions -- Micrographic method using standard diagrams 90.60 TC 17/SC 7
ISO 4968:1979
Steel -- Macrographic examination by sulfur print (Baumann method) 90.93 TC 17/SC 7
ISO 4969:1980
Steel -- Macroscopic examination by etching with strong mineral acids 90.93 TC 17/SC 7
ISO 4970:1979
Steel -- Determination of total or effective thickness of thin surface-hardened layers 90.93 TC 17/SC 7
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 9042:1988
Steels -- Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid 90.20 TC 17/SC 7
ISO/TR 14321:1997
Sintered metal materials, excluding hardmetals -- Metallographic preparation and examination 60.60 TC 119/SC 3

77.060 Corrosion of metals
Surface treatment and coating, see 25.220
Standard and/or project TC
ISO 3651-1:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) 90.60 TC 17/SC 7
ISO 3651-2:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid 90.60 TC 17/SC 7
ISO 6509:1981
Corrosion of metals and alloys -- Determination of dezincification resistance of brass 90.60 TC 156
ISO 6957:1988
Copper alloys -- Ammonia test for stress corrosion resistance 90.20 TC 26
ISO 7384:1986
Corrosion tests in artificial atmosphere -- General requirements 90.60 TC 156
ISO 7441:1984
Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests 90.92 TC 156
ISO/NP 7441
Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests 10.99 TC 156
ISO 7539-1:1987
Corrosion of metals and alloys -- Stress corrosion testing -- Part 1: General guidance on testing procedures 90.92 TC 156
ISO 7539-2:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 2: Preparation and use of bent-beam specimens 90.20 TC 156
ISO 7539-3:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 3: Preparation and use of U-bend specimens 90.20 TC 156
ISO 7539-4:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 4: Preparation and use of uniaxially loaded tension specimens 90.20 TC 156
ISO 7539-5:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 5: Preparation and use of C-ring specimens 90.20 TC 156
ISO 7539-6:2003
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement 90.93 TC 156
ISO 7539-7:2005
Corrosion of metals and alloys -- Stress corrosion testing -- Part 7: Method for slow strain rate testing 90.93 TC 156
ISO 7539-8:2000
Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments 90.60 TC 156
ISO 7539-9:2003
Corrosion of metals and alloys -- Stress corrosion testing -- Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement 90.93 TC 156
ISO 8044:1999
Corrosion of metals and alloys -- Basic terms and definitions 90.93 TC 156
ISO/PRF 8407
Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens 50.00 TC 156
ISO 8407:1991
Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens 90.92 TC 156
ISO/NP 8565
Metals and alloys -- Atmospheric corrosion testing -- General requirements for field tests 10.99 TC 156
ISO 8565:1992
Metals and alloys -- Atmospheric corrosion testing -- General requirements for field tests 90.92 TC 156
ISO 8993:1989
Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method 90.92 TC 79/SC 2
ISO/DIS 8993
Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method 40.00 TC 79/SC 2
ISO 8994:1989
Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method 90.92 TC 79/SC 2
ISO/DIS 8994
Aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method 40.20 TC 79/SC 2
ISO/NP 9223
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification, determination and estimation 10.99 TC 156
ISO 9223:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification 90.92 TC 156
ISO 9224:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories 90.92 TC 156
ISO/NP 9224
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories 10.99 TC 156
ISO 9225:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of pollution 90.92 TC 156
ISO/NP 9225
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of environmental parameters affecting corrosivity of atmospheres 10.99 TC 156
ISO 9226:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity 90.92 TC 156
ISO/NP 9226
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity 10.99 TC 156
ISO 9227:2006
Corrosion tests in artificial atmospheres -- Salt spray tests 90.20 TC 156
ISO 9400:1990
Nickel-based alloys -- Determination of resistance to intergranular corrosion 90.60 TC 156
ISO 9591:2004
Corrosion of aluminium alloys -- Determination of resistance to stress corrosion cracking 90.93 TC 156
ISO 10062:2006
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) 90.60 TC 156
ISO 10270:1995
Corrosion of metals and alloys -- Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors 90.60 TC 156
ISO 10270:1995/Cor 1:1997
60.60 TC 156
ISO/DIS 11130
Corrosion of metals and alloys -- Alternate immersion test in salt solution 40.60 TC 156
ISO 11130:1999
Corrosion of metals and alloys -- Alternate immersion test in salt solution 90.92 TC 156
ISO 11303:2002
Corrosion of metals and alloys -- Guidelines for selection of protection methods against atmospheric corrosion 90.93 TC 156
ISO 11306:1998
Corrosion of metals and alloys -- Guidelines for exposing and evaluating metals and alloys in surface sea water 90.60 TC 156
ISO 11463:1995
Corrosion of metals and alloys -- Evaluation of pitting corrosion 90.60 TC 156
ISO 11474:1998
Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) 90.60 TC 156
ISO 11782-1:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing 90.60 TC 156
ISO 11782-2:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens 90.60 TC 156
ISO 11844-1:2006
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 1: Determination and estimation of indoor corrosivity 90.60 TC 156
ISO 11844-2:2005
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 2: Determination of corrosion attack in indoor atmospheres 90.60 TC 156
ISO 11844-3:2006
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 3: Measurement of environmental parameters affecting indoor corrosivity 90.20 TC 156
ISO 11845:1995
Corrosion of metals and alloys -- General principles for corrosion testing 90.60 TC 156
ISO 11846:1995
Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 90.92 TC 156
ISO/NP 11846
Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 10.99 TC 156
ISO 11881:1999
Corrosion of metals and alloys -- Exfoliation corrosion testing of aluminium alloys 90.93 TC 156
ISO 11881:1999/Cor 1:1999
60.60 TC 156
ISO 12473:2006
General principles of cathodic protection in sea water 90.60 TC 156
ISO/NP 12495
Cathodic protection for fixed steel offshore structures 10.99 TC 156
ISO/NP 12696
Cathodic protection of steel in concrete 10.99 TC 156
ISO 12732:2006
Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) 90.20 TC 156
ISO/NP 13173
Cathodic protection for steel offshore floating structures 10.99 TC 156
ISO/NP 13174
Cathodic protection for harbour installations 10.99 TC 156
ISO 14993:2001
Corrosion of metals and alloys -- Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions 90.60 TC 156
ISO 15324:2000
Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test 90.60 TC 156
ISO 15329:2006
Corrosion of metals and alloys -- Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys 90.20 TC 156
ISO 16151:2005
Corrosion of metals and alloys -- Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions 90.60 TC 156
ISO/NP 16701
Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution 10.99 TC 156
ISO 16701:2003
Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution 90.92 TC 156
ISO 16784-1:2006
Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems 90.60 TC 156
ISO 16784-2:2006
Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig 90.60 TC 156
ISO 17081:2004
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique 90.93 TC 156
ISO 17475:2005
Corrosion of metals and alloys -- Electrochemical test methods -- Guidelines for conducting potentiostatic and potentiodynamic polarization measurements 90.60 TC 156
ISO 17475:2005/Cor 1:2006
60.60 TC 156
ISO/CD 17752
Corrosion of metals and alloys -- Procedure to determine run off rates of metals from materials as a result of atmospheric corrosion 30.00 TC 156
ISO 17864:2005
Corrosion of metals and alloys -- Determination of the critical pitting temperature under potientiostatic control 90.93 TC 156
ISO 21207:2004
Corrosion tests in artificial atmospheres -- Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying 90.93 TC 156
ISO 21207:2004/Cor 1:2008
60.60 TC 156
ISO/DIS 21610
Corrosion of metals and alloys -- Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels 40.99 TC 156

77.080 Ferrous metals
Including classification, designation, sampling, chemical analysis, etc.
Dimensions and quality grades of iron and steel products, see 77.140
77.080.01 Ferrous metals in general
ISO 437:1982
Steel and cast iron -- Determination of total carbon content -- Combustion gravimetric method 90.93 TC 17/SC 1
ISO 437:1982/NP Amd 1
10.99 TC 17/SC 1
ISO 439:1994
Steel and iron -- Determination of total silicon content -- Gravimetric method 90.20 TC 17/SC 1
ISO 629:1982
Steel and cast iron -- Determination of manganese content -- Spectrophotometric method 90.93 TC 17/SC 1
ISO 671:1982
Steel and cast iron -- Determination of sulphur content -- Combustion titrimetric method 90.93 TC 17/SC 1
ISO 4829-1:1986
Steel and cast iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 and 1,0 % 90.93 TC 17/SC 1
ISO 4829-2:1988
Steel and iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 2: Silicon contents between 0,01 and 0,05 % 90.20 TC 17/SC 1
ISO 4934:2003
Steel and iron -- Determination of sulfur content -- Gravimetric method 90.93 TC 17/SC 1
ISO 4935:1989
Steel and iron -- Determination of sulfur content -- Infrared absorption method after combustion in an induction furnace 90.20 TC 17/SC 1
ISO 4937:1986
Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method 90.93 TC 17/SC 1
ISO 4938:1988
Steel and iron -- Determination of nickel content -- Gravimetric or titrimetric method 90.20 TC 17/SC 1
ISO 4939:1984
Steel and cast iron -- Determination of nickel content -- Dimethylglyoxime spectrophotometric method 90.20 TC 17/SC 1
ISO 4940:1985
Steel and cast iron -- Determination of nickel content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 4941:1994
Steel and iron -- Determination of molybdenum content -- Thiocyanate spectrophotometric method 90.20 TC 17/SC 1
ISO 4942:1988
Steel and iron -- Determination of vanadium content -- N-BPHA spectrophotometric method 90.20 TC 17/SC 1
ISO 4943:1985
Steel and cast iron -- Determination of copper content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 4946:1984
Steel and cast iron -- Determination of copper content -- 2,2'-Diquinolyl spectrophotometric method 90.20 TC 17/SC 1
ISO 4947:1986
Steel and cast iron -- Determination of vanadium content -- Potentiometric titration method 90.93 TC 17/SC 1
ISO/TR 7003:1990
Unified format for the designation of metals 60.60 TMB
ISO 9556:1989
Steel and iron -- Determination of total carbon content -- Infrared absorption method after combustion in an induction furnace 90.20 TC 17/SC 1
ISO 9647:1989
Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method 90.20 TC 17/SC 1
ISO/TR 9769:1991
Steel and iron -- Review of available methods of analysis 60.60 TC 17/SC 1
ISO 10138:1991
Steel and iron -- Determination of chromium content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 10280:1991
Steel and iron -- Determination of titanium content -- Diantipyrylmethane spectrometric method 90.93 TC 17/SC 1
ISO 10700:1994
Steel and iron -- Determination of manganese content -- Flame atomic absorption spectrometric method 90.20 TC 17/SC 1
ISO 10701:1994
Steel and iron -- Determination of sulfur content -- Methylene blue spectrophotometric method 90.20 TC 17/SC 1
ISO 10702:1993
Steel and iron -- Determination of nitrogen content -- Titrimetric method after distillation 90.93 TC 17/SC 1
ISO 10714:1992
Steel and iron -- Determination of phosphorus content -- Phosphovanadomolybdate spectrophotometric method 90.93 TC 17/SC 1
ISO/TR 10719:1994
Steel and iron -- Determination of non-combined carbon content -- Infrared absorption method after combustion in an induction furnace 90.93 TC 17/SC 1
ISO 10720:1997
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas 90.93 TC 17/SC 1
ISO 11652:1997
Steel and iron -- Determination of cobalt content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 13898-1:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution 90.93 TC 17/SC 1
ISO 13898-2:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content 90.93 TC 17/SC 1
ISO 13898-3:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of copper content 90.93 TC 17/SC 1
ISO 13898-4:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content 90.93 TC 17/SC 1
ISO 13902:1997
Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace 90.93 TC 17/SC 1
ISO 14284:1996
Steel and iron -- Sampling and preparation of samples for the determination of chemical composition 90.93 TC 17/SC 1
ISO 15350:2000
Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) 90.93 TC 17/SC 1
ISO 15351:1999
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 90.20 TC 17/SC 1
ISO 15353:2001
Steel and iron -- Determination of tin content -- Flame atomic absorption spectrometric method (extraction as Sn-SCN) 90.93 TC 17/SC 1
ISO 15355:1999
Steel and iron -- Determination of chromium content -- Indirect titration method 90.20 TC 17/SC 1
ISO 16918-1:2009
Steel and iron -- Determination of nine elements by the inductively coupled plasma mass spectrometric method -- Part 1: Determination of tin, antimony, cerium, lead and bismuth 60.60 TC 17/SC 1
ISO 17053:2005
Steel and iron -- Determination of oxygen -- Infrared method after fusion under inert gas 90.93 TC 17/SC 1
ISO 17058:2004
Steel and iron -- Determination of arsenic content -- Spectrophotometric method 90.93 TC 17/SC 1

77.080.10 Irons
Standard and/or project TC
ISO 185:2005
Grey cast irons -- Classification 90.60 TC 25
ISO 945-1:2008
Microstructure of cast irons -- Part 1: Graphite classification by visual analysis 60.60 TC 25
ISO 1083:2004
Spheroidal graphite cast irons - Classification 90.93 TC 25
ISO 2892:2007
Austenitic cast irons -- Classification 60.60 TC 25
ISO 2892:2007/Cor 1:2009
60.60 TC 25
ISO 5922:2005
Malleable cast iron 90.93 TC 25
ISO 9147:1987
Pig-irons -- Definition and classification 90.93 TC 25
ISO/PRF TR 10809-1
Cast Irons -- Part 1: Materials and properties for design 50.00 TC 25
ISO/CD TR 10809-2
Cast Irons -- Part 2: Welding 30.20 TC 25
ISO/TR 15931:2004
Designation system for cast irons and pig irons 60.60 TC 25
ISO 16112:2006
Compacted (vermicular) graphite cast irons -- Classification 90.20 TC 25
ISO 17804:2005
Founding -- Ausferritic spheroidal graphite cast irons -- Classification 90.60 TC 25
ISO 21988:2006
Abrasion-resistant cast irons -- Classification 90.20 TC 25

77.080.20 Steels
Standard and/or project TC
ISO 404:1992
Steel and steel products -- General technical delivery requirements 90.60 TC 17/SC 20
ISO/TR 4830-4:1978
Steel -- Determination of low carbon contents -- Part 4: Coulometric method after combustion 90.93 TC 17/SC 1
ISO 4945:1977
Steel -- Determination of nitrogen content -- Spectrophotometric method 90.93 TC 17/SC 1
ISO 4948-1:1982
Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition 90.93 TC 17
ISO 4948-2:1981
Steels -- Classification -- Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics 90.93 TC 17
ISO/TS 4949:2003
Steel names based on letter symbols 90.93 TC 17
ISO/TR 6306:1989
Chemical analysis of steel -- Order of listing elements 60.60 TC 17/SC 20
ISO/TR 7705:1991
Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications 90.93 TC 17
ISO 9441:1988
Steel -- Determination of niobium content -- PAR spectrophotometric method 90.20 TC 17/SC 1
ISO 9658:1990
Steel -- Determination of aluminium content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 10153:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method 90.93 TC 17/SC 1
ISO 10278:1995
Steel -- Determination of manganese content -- Inductively coupled plasma atomic emission spectrometric method 90.93 TC 17/SC 1
ISO 10697-1:1992
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 1: Determination of acid-soluble calcium content 90.93 TC 17/SC 1
ISO 10697-2:1994
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 2: Determination of total calcium content 90.20 TC 17/SC 1
ISO 10698:1994
Steel -- Determination of antimony content -- Electrothermal atomic absorption spectrometric method 90.20 TC 17/SC 1
ISO 11653:1997
Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange 90.93 TC 17/SC 1
ISO/TS 13899-1:2004
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: Determination of Mo content 90.93 TC 17/SC 1
ISO 13899-2:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of Nb content 90.93 TC 17/SC 1
ISO/TS 13899-3:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of W content 90.93 TC 17/SC 1
ISO 13900:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation 90.93 TC 17/SC 1
ISO 14250:2000
Steel -- Metallographic characterization of duplex grain size and distributions 90.93 TC 17/SC 7
ISO/TR 15349-1:1998
Unalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) 90.93 TC 17/SC 1
ISO 15349-2:1999
Unalloyed steel -- Determination of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) 90.20 TC 17/SC 1
ISO/TR 15349-3:1998
Unalloyed steel -- Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) 90.93 TC 17/SC 1
ISO/DIS 17054
Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique 40.60 TC 17/SC 1
ISO/TR 17055:2002
Steel -- Determination of silicon content -- Inductively coupled plasma atomic emission spectrometric method 60.60 TC 17/SC 1
ISO 17925:2004
Zinc and/or aluminium based coatings on steel -- Determination of coating mass per unit area and chemical composition -- Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry 90.93 TC 17/SC 1
ISO/WD 24897
Steel -- Determination of trace amount of oxigen -- Infrared method with oxide layer subtraction technique 20.20 TC 17/SC 1

77.100 Ferroalloys
Including classification, designation, sampling, chemical analysis, etc.
Standard and/or project TC
ISO 3713:1987
Ferroalloys -- Sampling and preparation of samples -- General rules 90.93 TC 132
ISO 4139:1979
Ferrosilicon -- Determination of aluminium content -- Flame atomic absorption spectrometric method 90.20 TC 132
ISO 4140:1979
Ferrochromium and ferrosilicochromium -- Determination of chromium content -- Potentiometric method 90.20 TC 132
ISO 4158:1978
Ferrosilicon, ferrosilicomanganese and ferrosilicochromium -- Determination of silicon content -- Gravimetric method 90.93 TC 132
ISO 4159:1978
Ferromanganese and ferrosilicomanganese -- Determination of manganese content -- Potentiometric method 90.93 TC 132
ISO 4173:1980
Ferromolybdenum -- Determination of molybdenum content -- Gravimetric method 90.93 TC 132
ISO 4346:1977
Steel wire ropes for general purposes -- Lubricants -- Basic requirements 90.93 TC 105
ISO 4551:1987
Ferroalloys -- Sampling and sieve analysis 90.93 TC 132
ISO 4552-1:1987
Ferroalloys -- Sampling and sample preparation for chemical analysis -- Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese 90.93 TC 132
ISO 4552-2:1987
Ferroalloys -- Sampling and sample preparation for chemical analysis -- Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium 90.93 TC 132
ISO 5445:1980
Ferrosilicon -- Specification and conditions of delivery 90.93 TC 132
ISO 5446:1980
Ferromanganese -- Specification and conditions of delivery 90.93 TC 132
ISO 5447:1980
Ferrosilicomanganese -- Specification and conditions of delivery 90.93 TC 132
ISO 5448:1981
Ferrochromium -- Specification and conditions of delivery 90.93 TC 132
ISO 5449:1980
Ferrosilicochromium -- Specification and conditions of delivery 90.93 TC 132
ISO 5450:1980
Ferrotungsten -- Specification and conditions of delivery 90.93 TC 132
ISO 5451:1980
Ferrovanadium -- Specification and conditions of delivery 90.93 TC 132
ISO 5452:1980
Ferromolybdenum -- Specification and conditions of delivery 90.93 TC 132
ISO 5453:1980
Ferroniobium -- Specification and conditions of delivery 90.93 TC 132
ISO 5454:1980
Ferrotitanium -- Specification and conditions of delivery 90.93 TC 132
ISO 6352:1985
Ferronickel -- Determination of nickel content -- Dimethylglyoxime gravimetric method 90.93 TC 155/SC 3
ISO 6467:1980
Ferrovanadium -- Determination of vanadium content -- Potentiometric method 90.93 TC 132
ISO 6501:1988
Ferronickel -- Specification and delivery requirements 90.20 TC 155/SC 5
ISO 7087:1984
Ferroalloys -- Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling 90.20 TC 132
ISO 7347:1987
Ferroalloys -- Experimental methods for checking the bias of sampling and sample preparation 90.93 TC 132
ISO 7373:1987
Ferroalloys -- Experimental methods for checking the precision of sample division 90.93 TC 132
ISO 7520:1985
Ferronickel -- Determination of cobalt content -- Flame atomic absorption spectrometric method 90.93 TC 155/SC 3
ISO 7524:1985
Nickel, ferronickel and nickel alloys -- Determination of carbon content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7526:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7527:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Iodimetric titration method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7692:1983
Ferrotitanium -- Determination of titanium content -- Titrimetric method 90.20 TC 132
ISO 7693:1984
Ferrotungsten -- Determination of tungsten content -- Cinchonine gravimetric method 90.20 TC 132
ISO/TR 7955:1982
Ferroniobium -- Determination of niobium content -- Gravimetric method 60.60 TC 132
ISO 8049:1988
Ferronickel shot -- Sampling for analysis 90.20 TC 155/SC 5
ISO 8050:1988
Ferronickel ingots or pieces -- Sampling for analysis 90.20 TC 155/SC 5
ISO 8343:1985
Ferronickel -- Determination of silicon content -- Gravimetric method 90.93 TC 155/SC 3
ISO 8954-1:1990
Ferroalloys -- Vocabulary -- Part 1: Materials 90.92 TC 132
ISO 8954-2:1990
Ferroalloys -- Vocabulary -- Part 2: Sampling and sample preparation 90.93 TC 132
ISO 8954-3:1990
Ferroalloys -- Vocabulary -- Part 3: Sieve analysis 90.93 TC 132
ISO 10386:1994
Ferroboron -- Specification and conditions of delivery 90.20 TC 132
ISO 10387:1994
Metal chrome -- Specification and conditions of delivery 90.20 TC 132
ISO 11400:1992
Nickel, ferronickel and nickel alloys -- Determination of phosphorus content -- Phosphovanadomolybdate molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO 11438-1:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 1: General requirements and sample dissolution 90.60 TC 155/SC 3
ISO 11438-2:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 2: Determination of lead content 90.60 TC 155/SC 3
ISO 11438-3:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 3: Determination of antimony content 90.60 TC 155/SC 3
ISO 11438-4:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 4: Determination of tin content 90.60 TC 155/SC 3
ISO 11438-5:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 5: Determination of tellurium content 90.60 TC 155/SC 3
ISO 11438-6:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 6: Determination of thallium content 90.60 TC 155/SC 3
ISO 11438-7:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 7: Determination of silver content 90.60 TC 155/SC 3
ISO 11438-8:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 8: Determination of indium content 90.60 TC 155/SC 3

77.120 Non-ferrous metals
Including classification, designation, sampling, chemical analysis, etc.
Dimensions and quality grades of non-ferrous metal products, see 77.150
Precious metals for dentistry, see 11.060.10
Precious metals for jewellery, see 39.060
77.120.01 Non-ferrous metals in general
Standard and/or project TC
ISO/AWI 3134
Aluminium and aluminium alloys -- Terms and definition -- General terms 20.00 TC 79
ISO 3134-1:1985
Light metals and their alloys -- Terms and definitions -- Part 1: Materials 90.92 TC 79
ISO/TR 7003:1990
Unified format for the designation of metals 60.60 TMB
ISO/TR 7242:1981
Chemical analysis of light metals and their alloys -- Statistical interpretation of inter-laboratory trials 90.93 TC 79

77.120.10 Aluminium and aluminium alloys
Standard and/or project TC
ISO 115:2003
Unalloyed aluminium ingots for remelting -- Classification and composition 90.60 TC 79/SC 4
ISO 793:1973
Aluminium and aluminium alloys -- Determination of iron -- Orthophenanthroline photometric method 90.93 TC 79
ISO 795:1976
Aluminium and aluminium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method 90.93 TC 79
ISO 796:1973
Aluminium alloys -- Determination of copper -- Electrolytic method 90.93 TC 79
ISO 797:1973
Aluminium and aluminium alloys -- Determination of silicon -- Gravimetric method 90.93 TC 79
ISO 808:1973
Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex 90.93 TC 79
ISO 886:1973
Aluminium and aluminium alloys -- Determination of manganese -- Photometric method (Manganese content between 0,005 and 1,5 %) 90.93 TC 79
ISO 1118:1978
Aluminium and aluminium alloys -- Determination of titanium -- Spectrophotometric chromotropic acid method 90.93 TC 79
ISO 1784:1976
Aluminium alloys -- Determination of zinc -- EDTA titrimetric method 90.93 TC 79
ISO 2107:2007
Aluminium and aluminium alloys -- Wrought products --Temper designations 60.60 TC 79/SC 9
ISO 2297:1973
Chemical analysis of aluminium and its alloys -- Complexometric determination of magnesium 90.93 TC 79
ISO 3256:1977
Aluminium and aluminium alloys -- Determination of magnesium -- Atomic absorption spectrophotometric method 90.93 TC 79
ISO 3978:1976
Aluminium and aluminium alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide, after extraction 90.93 TC 79
ISO 3979:1977
Aluminium and aluminium alloys -- Determination of nickel -- Spectrophotometric method using dimethylglyoxime 90.93 TC 79
ISO 3980:1977
Aluminium and aluminium alloys -- Determination of copper -- Atomic absorption spectrophotometric method 90.93 TC 79
ISO 3981:1977
Aluminium and aluminium alloys -- Determination of nickel -- Atomic absorption spectrophotometric method 90.93 TC 79
ISO 4192:1981
Aluminium and aluminium alloys -- Determination of lead content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 4193:1981
Aluminium and aluminium alloys -- Determination of chromium content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 5194:1981
Aluminium and aluminium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 6827:1981
Aluminium and aluminium alloys -- Determination of titanium content -- Diantipyrylmethane photometric method 90.93 TC 79
ISO 17615:2007
Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications 60.60 TC 79/SC 7
ISO 17615:2007/Cor 1:2008
60.60 TC 79/SC 7
ISO 20203:2005
Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of crystallite size of calcined petroleum coke by X-ray diffraction 90.93 TC 226

77.120.20 Magnesium and magnesium alloys
Standard and/or project TC
ISO 791:1973
Magnesium alloys -- Determination of aluminium -- 8-hydroxyquinoline gravimetric method 90.93 TC 79
ISO 792:1973
Magnesium and magnesium alloys -- Determination of iron -- Orthophenanthroline photometric method 90.93 TC 79
ISO 794:1976
Magnesium and magnesium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method 90.93 TC 79
ISO 809:1973
Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content between 0,01 and 0,8 %) 90.93 TC 79
ISO 810:1973
Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 0,01 %) 90.93 TC 79
ISO 1178:1976
Magnesium alloys -- Determination of soluble zirconium -- Alizarin sulphonate photometric method 90.93 TC 79
ISO 1783:1973
Magnesium alloys -- Determination of zinc -- Volumetric method 90.93 TC 79
ISO 1975:1973
Magnesium and magnesium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex 90.93 TC 79
ISO 2353:1972
Magnesium and its alloys -- Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver -- Periodate photometric method 90.93 TC 79
ISO 2354:1976
Magnesium alloys -- Determination of insoluble zirconium -- Alizarin sulphonate photometric method 90.93 TC 79
ISO 2355:1972
Chemical analysis of magnesium and its alloys -- Determination of rare earths -- Gravimetric method 90.93 TC 79
ISO 3116:2007
Magnesium and magnesium alloys -- Wrought magnesium alloys 60.60 TC 79/SC 5
ISO 3255:1974
Magnesium and magnesium alloys -- Determination of aluminium -- Chromazurol S photometric method 90.93 TC 79
ISO 4058:1977
Magnesium and its alloys -- Determination of nickel -- Photometric method using dimethylglyoxime 90.93 TC 79
ISO 4194:1981
Magnesium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 5196-1:1980
Magnesium alloys -- Determination of thorium -- Part 1: Gravimetric method 90.93 TC 79
ISO 5196-2:1980
Magnesium alloys -- Determination of thorium -- Part 2: Titrimetric method 90.93 TC 79
ISO 8287:2000
Magnesium and magnesium alloys -- Unalloyed magnesium -- Chemical composition 90.60 TC 79/SC 5
ISO/WD 11707
Magnesium and magnesium alloys -- Determination of lead and cadmium 20.20 TC 79/SC 5
ISO 23079:2005
Magnesium and magnesium alloys -- Returns -- Requirements, classification and acceptance 90.60 TC 79/SC 5
ISO 26202:2007
Magnesium and magnesium alloys -- Magnesium alloys for cast anodes 60.60 TC 79/SC 5

77.120.30 Copper and copper alloys
Standard and/or project TC
ISO 197-1:1983
Copper and copper alloys -- Terms and definitions -- Part 1: Materials 90.20 TC 26
ISO 197-5:1980
Copper and copper alloys -- Terms and definitions -- Part 5: Methods of processing and treatment 90.20 TC 26
ISO 1190-1:1982
Copper and copper alloys -- Code of designation -- Part 1: Designation of materials 90.20 TC 26
ISO 1553:1976
Unalloyed copper containing not less than 99,90 % of copper -- Determination of copper content -- Electrolytic method 90.60 TC 26
ISO 1554:1976
Wrought and cast copper alloys -- Determination of copper content -- Electrolytic method 90.60 TC 26
ISO 1810:1976
Copper alloys -- Determination of nickel (low contents) -- Dimethylglyoxime spectrophotometric method 90.60 TC 26
ISO 1811-1:1988
Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 1: Sampling of cast unwrought products 90.20 TC 26
ISO 1811-2:1988
Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 2: Sampling of wrought products and castings 90.20 TC 26
ISO 1812:1976
Copper alloys -- Determination of iron content -- 1,10- Phenanthroline spectrophotometric method 90.60 TC 26
ISO 2543:1973
Copper and copper alloys -- Determination of manganese -- Spectrophotometric method 90.60 TC 26
ISO 2624:1990
Copper and copper alloys -- Estimation of average grain size 90.20 TC 26
ISO 3110:1975
Copper alloys -- Determination of aluminium as alloying element -- Volumetric method 90.60 TC 26
ISO 3111:1975
Copper alloys -- Determination of tin as alloying element -- Volumetric method 90.60 TC 26
ISO 3112:1975
Copper and copper alloys -- Determination of lead -- Extracting titration method 90.60 TC 26
ISO 3220:1975
Copper and copper alloys -- Determination of arsenic -- Photometric method 90.60 TC 26
ISO 4382-1:1991
Plain bearings -- Copper alloys -- Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings 90.93 TC 123/SC 2
ISO 4382-2:1991
Plain bearings -- Copper alloys -- Part 2: Wrought copper alloys for solid plain bearings 90.93 TC 123/SC 2
ISO 4740:1985
Copper and copper alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 4741:1984
Copper and copper alloys -- Determination of phosphorus content -- Molybdovanadate spectrometric method 90.60 TC 26
ISO 4742:1984
Copper alloys -- Determination of nickel content -- Gravimetric method 90.60 TC 26
ISO 4743:1984
Copper alloys -- Determination of nickel content -- Titrimetric method 90.60 TC 26
ISO 4744:1984
Copper and copper alloys -- Determination of chromium content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 4748:1984
Copper alloys -- Determination of iron content -- Na2EDTA titrimetric method 90.60 TC 26
ISO 4749:1984
Copper alloys -- Determination of lead content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 4751:1984
Copper and copper alloys -- Determination of tin content -- Spectrometric method 90.60 TC 26
ISO 5956:1984
Copper and copper alloys -- Determination of antimony content -- Rhodamine B spectrometric method 90.60 TC 26
ISO 5959:1984
Copper and copper alloys -- Determination of bismuth content -- Diethyldithiocarbamate spectrometric method 90.60 TC 26
ISO 5960:1984
Copper alloys -- Determination of cadmium content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 6437:1984
Copper alloys -- Determination of chromium content -- Titrimetric method 90.60 TC 26
ISO 7266:1984
Copper and copper alloys -- Determination of sulfur content -- Combustion titrimetric method 90.60 TC 26

77.120.40 Nickel, chromium and their alloys
Standard and/or project TC
ISO 6283:1995
Refined nickel 90.93 TC 155
ISO 6351:1985
Nickel -- Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc contents -- Flame atomic absorption spectrometric method 90.93 TC 155/SC 3
ISO 6372-1:1989
Nickel and nickel alloys -- Terms and definitions -- Part 1: Materials 90.93 TC 155
ISO 6372-2:1989
Nickel and nickel alloys -- Terms and definitions -- Part 2: Refinery products 90.93 TC 155
ISO 7156:1991
Refined nickel -- Sampling 90.60 TC 155/SC 3
ISO 7523:1985
Nickel -- Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents -- Electrothermal atomic absorption spectrometric method 90.93 TC 155/SC 3
ISO 7524:1985
Nickel, ferronickel and nickel alloys -- Determination of carbon content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7525:1985
Nickel -- Determination of sulfur content -- Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide 90.93 TC 155/SC 3
ISO 7526:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7527:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Iodimetric titration method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7528:1989
Nickel alloys -- Determination of iron content -- Titrimetric method with potassium dichromate 90.20 TC 155/SC 3
ISO 7529:1989
Nickel alloys -- Determination of chromium content -- Potentiometric titration method with ammonium iron(II) sulfate 90.20 TC 155/SC 3
ISO 7530-1:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 1: General requirements and sample dissolution 90.93 TC 155/SC 3
ISO 7530-2:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 2: Determination of cobalt content 90.93 TC 155/SC 3
ISO 7530-3:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 3: Determination of chromium content 90.93 TC 155/SC 3
ISO 7530-4:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 4: Determination of copper content 90.93 TC 155/SC 3
ISO 7530-5:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 5: Determination of iron content 90.93 TC 155/SC 3
ISO 7530-6:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 6: Determination of manganese content 90.93 TC 155/SC 3
ISO 7530-7:1992
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 7: Determination of aluminium content 90.60 TC 155/SC 3
ISO 7530-8:1992
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 8: Determination of silicon content 90.60 TC 155/SC 3
ISO 7530-9:1993
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 9: Determination of vanadium content 90.60 TC 155/SC 3
ISO 9388:1992
Nickel alloys -- Determination of phosphorus content -- Molybdenum blue molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO/TR 9721:1992
Nickel and nickel alloys -- Rules for material description based on chemical symbols 60.60 TC 155/SC 2
ISO 11400:1992
Nickel, ferronickel and nickel alloys -- Determination of phosphorus content -- Phosphovanadomolybdate molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO 11433:1993
Nickel alloys -- Determination of titanium content -- Diantipyrylmethane molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO/TR 11434:1992
Nickel alloys -- Determination of niobium and tantalum -- Ion exchange method 60.60 TC 155
ISO 11435:2005
Nickel alloys -- Determination of molybdenum -- Inductively coupled plasma atomic emission spectrometric method 90.60 TC 155/SC 3
ISO 11436:1993
Nickel and nickel alloys -- Determination of total boron content -- Curcumin molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO 11437-1:1994
Nickel alloys -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 1: General requirements and sample dissolution 90.20 TC 155/SC 3
ISO 11437-2:1994
Nickel alloys -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 2: Determination of lead content 90.20 TC 155/SC 3
ISO 12169:1996
Nickel oxide -- Determination of nickel content -- Electrolytic deposition method 90.60 TC 155/SC 3
ISO 22033:2005
Nickel alloys -- Determination of niobium -- Inductively coupled plasma atomic emission spectrometric method 90.60 TC 155/SC 3
ISO 22725:2007
Nickel alloys -- Determination of tantalum -- Inductively coupled plasma atomic emission spectrometric method 60.60 TC 155/SC 3

77.120.50 Titanium and titanium alloys
Standard and/or project TC
ISO 22960:2008
Titanium and titanium alloys -- Determination of iron -- Molecular absorption spectrometry using 1, 10-phenanthroline 60.60 TC 79/SC 11
ISO 22961:2008
Titanium and titanium alloys -- Determination of iron -- Atomic absorption spectrometry 60.60 TC 79/SC 11
ISO 22962:2008
Titanium and titanium alloys -- Determination of iron -- Inductively coupled plasma atomic emission spectrometry 60.60 TC 79/SC 11
ISO 22963:2008
Titanium and titanium alloys -- Determination of oxygen -- Infrared method after fusion under inert gas 60.60 TC 79/SC 11
ISO/DIS 28401
Light metals and their alloys -- Titanium and titanium alloys -- Classification and terminology 40.20 TC 79/SC 11

77.120.60 Lead, zinc, tin and their alloys
Standard and/or project TC
ISO 301:2006
Zinc alloy ingots intended for castings 90.20 TC 18/SC 2
ISO 714:1975
Zinc -- Determination of iron content -- Photometric method 90.20 TC 18/SC 1
ISO 752:2004
Zinc ingots 90.60 TC 18/SC 3
ISO 752:2004/Cor 1:2006
60.60 TC 18/SC 3
ISO 1169:2006
Zinc alloys -- Determination of aluminium content -- Titrimetric method 90.20 TC 18/SC 1
ISO 1976:1975
Zinc alloys -- Determination of copper content -- Electrolytic method 90.93 TC 18/SC 1
ISO 3750:2006
Zinc alloys -- Determination of magnesium content -- Flame atomic absorption spectrometric method 90.20 TC 18/SC 1
ISO 3815-1:2005
Zinc and zinc alloys -- Part 1: Analysis of solid samples by optical emission spectrometry 90.93 TC 18/SC 1
ISO 3815-2:2005
Zinc and zinc alloys -- Part 2: Analysis by inductively coupled plasma optical emission spectrometry 90.93 TC 18/SC 1
ISO 4381:2000
Plain bearings -- Lead and tin casting alloys for multilayer plain bearings 90.92 TC 123/SC 2
ISO 15201:2006
Zinc and zinc alloys -- Castings -- Specifications 90.20 TC 18/SC 2
ISO 20081:2005
Zinc and zinc alloys -- Method of sampling -- Specifications 90.93 TC 18/SC 1

77.120.70 Cadmium, cobalt and their alloys
77.120.99 Other non-ferrous metals and their alloys

77.140 Iron and steel products
Steel products for aerospace construction, see 49.025.10
77.140.01 Iron and steel products in general
Standard and/or project TC
ISO 404:1992
Steel and steel products -- General technical delivery requirements 90.60 TC 17/SC 20
ISO 630:1995
Structural steels -- Plates, wide flats, bars, sections and profiles 90.92 TC 17/SC 3
ISO 630:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO/CD 630-1
Structural steels -- Part 1: General delivery conditions for hot rolled products 30.20 TC 17/SC 3
ISO/CD 630-2
Structural steels -- Part 2: Technical delivery conditions for non alloy structural steels for general purpose 30.20 TC 17/SC 3
ISO 1052:1982
Steels for general engineering purposes 90.20 TC 17/SC 3
ISO 4885:1996
Ferrous products -- Heat treatments -- Vocabulary 90.93 TC 17
ISO 6929:1987
Steel products -- Definitions and classification 90.92 TC 17
ISO/NP 6929
Steel products -- Definitions and classification 10.99 TC 17
ISO/NP 10474
Steel and steel products -- Inspection documents 10.99 TC 17/SC 20
ISO 10474:1991
Steel and steel products -- Inspection documents 90.92 TC 17/SC 20

77.140.10 Heat-treatable steels
Standard and/or project TC
ISO 683-1:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products 90.92 TC 17/SC 4
ISO 683-9:1988
Heat-treatable steels, alloy steels and free-cutting steels -- Part 9: Wrought free-cutting steels 90.60 TC 17/SC 4
ISO 683-10:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 10: Wrought nitriding steels 90.93 TC 17/SC 4
ISO 683-11:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 11: Wrought case-hardening steels 90.92 TC 17/SC 4
ISO 683-15:1992
Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines 90.93 TC 17/SC 4
ISO 683-17:1999
Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels 90.20 TC 17/SC 4
ISO 683-18:1996
Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels 90.93 TC 17/SC 4
ISO 4954:1993
Steels for cold heading and cold extruding 90.60 TC 17/SC 4
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions 90.93 TC 17/SC 4
ISO/TR 11637:1997
Boron treated engineering steels for quenching and tempering 90.93 TC 17/SC 4
ISO 11692:1994
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures 90.60 TC 17/SC 4

77.140.15 Steels for reinforcement of concrete
Standard and/or project TC
ISO 6934-1:1991
Steel for the prestressing of concrete -- Part 1: General requirements 90.93 TC 17/SC 16
ISO 6934-2:1991
Steel for the prestressing of concrete -- Part 2: Cold-drawn wire 90.93 TC 17/SC 16
ISO 6934-3:1991
Steel for the prestressing of concrete -- Part 3: Quenched and tempered wire 90.93 TC 17/SC 16
ISO 6934-4:1991
Steel for the prestressing of concrete -- Part 4: Strand 90.93 TC 17/SC 16
ISO 6934-4:1991/Cor 1:1992
60.60 TC 17/SC 16
ISO 6934-4:1991/Cor 2:2000
60.60 TC 17/SC 16
ISO 6934-5:1991
Steel for the prestressing of concrete -- Part 5: Hot-rolled steel bars with or without subsequent processing 90.93 TC 17/SC 16
ISO 6935-1:2007
Steel for the reinforcement of concrete -- Part 1: Plain bars 60.60 TC 17/SC 16
ISO 6935-2:2007
Steel for the reinforcement of concrete -- Part 2: Ribbed bars 60.60 TC 17/SC 16
ISO 6935-3:1992
Steel for the reinforcement of concrete -- Part 3: Welded fabric 90.93 TC 17/SC 16
ISO 6935-3:1992/Cor 1:2000
60.60 TC 17/SC 16
ISO 10144:1991
Certification scheme for steel bars and wires for the reinforcement of concrete structures 90.93 TC 17/SC 16
ISO 10544:1992
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric 90.93 TC 17/SC 16
ISO 11082:1992
Certification scheme for welded fabric for the reinforcement of concrete structures 90.93 TC 17/SC 16
ISO/TR 12662:1997
Certification scheme for prestressing steels 60.60 TC 17/SC 16
ISO/NP 12696
Cathodic protection of steel in concrete 10.99 TC 156
ISO/AWI 13270
Steel fibres for concrete -- Definitions and specifications 20.00 TC 17/SC 17
ISO 14654:1999
Epoxy-coated steel for the reinforcement of concrete 90.93 TC 17/SC 16
ISO 14655:1999
Epoxy-coated strand for the prestressing of concrete 90.93 TC 17/SC 16
ISO 14656:1999
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete 90.93 TC 17/SC 16
ISO/DIS 15630-1.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire 40.60 TC 17/SC 16
ISO 15630-1:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire 90.92 TC 17/SC 16
ISO 15630-2:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric 90.92 TC 17/SC 16
ISO/DIS 15630-2.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric 40.60 TC 17/SC 16
ISO 15630-3:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel 90.92 TC 17/SC 16
ISO/DIS 15630-3.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel 40.60 TC 17/SC 16
ISO/CD 15698-1
Steel for the reinforcement of concrete -- Headed bars -- Part 1: Requirements 30.60 TC 17/SC 16
ISO/CD 15698-2
Steel for the reinforcement of concrete -- Headed bars -- Part 2: Test methods 30.60 TC 17/SC 16
ISO 15835-1:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements 60.60 TC 17/SC 16
ISO 15835-2:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods 60.60 TC 17/SC 16
ISO 16020:2005
Steel for the reinforcement and prestressing of concrete -- Vocabulary 90.93 TC 17/SC 16

77.140.20 Stainless steels
Including alloyed steels, corrosion-resistant steels, heat-resisting steels, etc.
Standard and/or project TC
ISO 683-1:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products 90.92 TC 17/SC 4
ISO 683-9:1988
Heat-treatable steels, alloy steels and free-cutting steels -- Part 9: Wrought free-cutting steels 90.60 TC 17/SC 4
ISO 683-10:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 10: Wrought nitriding steels 90.93 TC 17/SC 4
ISO 683-11:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 11: Wrought case-hardening steels 90.92 TC 17/SC 4
ISO 683-15:1992
Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines 90.93 TC 17/SC 4
ISO 683-17:1999
Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels 90.20 TC 17/SC 4
ISO 683-18:1996
Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels 90.93 TC 17/SC 4
ISO 4952:2006
Structural steels with improved atmospheric corrosion resistance 60.60 TC 17/SC 3
ISO 4954:1993
Steels for cold heading and cold extruding 90.60 TC 17/SC 4
ISO 4955:2005
Heat-resistant steels 90.93 TC 17/SC 4
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 7153-1:1991
Surgical instruments -- Metallic materials -- Part 1: Stainless steel 90.60 TC 170
ISO 7153-1:1991/Amd 1:1999
60.60 TC 170
ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions 90.93 TC 17/SC 4
ISO 9444-1:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9444-2:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate 60.60 TC 17/SC 4
ISO 9445-1:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9445-2:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet 60.60 TC 17/SC 4
ISO 11692:1994
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures 90.60 TC 17/SC 4
ISO 11972:1998
Corrosion-resistant cast steels for general applications 90.60 TC 17/SC 11
ISO 11973:1999
Heat-resistant cast steels and alloys for general applications 90.20 TC 17/SC 11
ISO/DIS 15510
Stainless steels -- Chemical composition 40.93 TC 17/SC 4
ISO/TS 15510:2003
Stainless steels -- Chemical composition 90.92 TC 17/SC 4
ISO 16143-1:2004
Stainless steels for general purposes -- Part 1: Flat products 90.93 TC 17/SC 4
ISO 16143-2:2004
Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections 90.93 TC 17/SC 4
ISO 16143-3:2005
Stainless steels for general purposes -- Part 3: Wire 90.93 TC 17/SC 4
ISO/DIS 18632
Alloyed steel -- Determination of manganese -- Potentiometric and visual titration method 40.00 TC 17/SC 1
ISO/WD 19272
Alloyed steel -- Determination of fifteen elements -- Glow discharge optical emission spectrometry 20.60 TC 17/SC 1

77.140.25 Spring steels
Standard and/or project TC
ISO 683-14:2004
Heat-treatable steels, alloy steels and free-cutting steels -- Part 14: Hot-rolled steels for quenched and tempered springs 90.93 TC 17/SC 4
ISO 6931-1:1994
Stainless steels for springs -- Part 1: Wire 90.20 TC 17/SC 4
ISO 6931-2:2005
Stainless steels for springs -- Part 2: Narrow strip 90.93 TC 17/SC 4
ISO 8458-1:2002
Steel wire for mechanical springs -- Part 1: General requirements 90.93 TC 17/SC 17
ISO 8458-2:2002
Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire 90.93 TC 17/SC 17
ISO 8458-3:2002
Steel wire for mechanical springs -- Part 3: Oil-hardened and tempered wire 90.93 TC 17/SC 17
ISO 9442:1988
Steel -- Hot-rolled ribbed and grooved flats for spring leaves -- Tolerances and dimensions 90.20 TC 17/SC 4

77.140.30 Steels for pressure purposes
Steels for pressure pipes and tubes for specific use, see 77.140.75
Standard and/or project TC
ISO 2605-3:1985
Steel products for pressure purposes -- Derivation and verification of elevated temperature properties -- Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited 90.93 TC 17
ISO 4978:1983
Flat rolled steel products for welded gas cylinders 90.93 TC 17/SC 10
ISO 4991:2005
Steel castings for pressure purposes 90.60 TC 17/SC 11
ISO 6303:1981
Pressure vessel steels not included in ISO 2604, Parts 1 to 6 -- Derivation of long-time stress rupture properties 90.93 TC 17
ISO/TR 7468:1981
Summary of average stress rupture properties of wrought steels for boilers and pressure vessels 60.60 TC 17
ISO 9327-1:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.93 TC 17/SC 10
ISO 9327-2:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties 90.93 TC 17/SC 10
ISO 9327-3:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9327-4:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength 90.93 TC 17/SC 10
ISO 9327-5:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels 90.93 TC 17/SC 10
ISO 9328-1:2003
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.92 TC 17/SC 10
ISO/CD 9328-1
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 30.99 TC 17/SC 10
ISO 9328-2:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 90.92 TC 17/SC 10
ISO/CD 9328-2
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 30.99 TC 17/SC 10
ISO 9328-3:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized 90.93 TC 17/SC 10
ISO 9328-3:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-4:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9328-4:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-5:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled 90.93 TC 17/SC 10
ISO 9328-5:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-6:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered 90.93 TC 17/SC 10
ISO 9328-6:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-7:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 90.92 TC 17/SC 10
ISO/CD 9328-7
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 30.99 TC 17/SC 10

77.140.35 Tool steels
Standard and/or project TC
ISO 4957:1999
Tool steels 90.20 TC 17/SC 4
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 11054:2006
Cutting tools -- Designation of high-speed steel groups 90.60 TC 29

77.140.40 Steels with special magnetic properties
77.140.45 Non-alloyed steels
ISO 683-1:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products 90.92 TC 17/SC 4
ISO 683-18:1996
Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels 90.93 TC 17/SC

77.140.50 Flat steel products and semi-products
Including plate, sheet and strip
Steel strips for springs, see 77.140.25
Standard and/or project TC
ISO 3573:2008
Hot-rolled carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 3574:2008
Cold-reduced carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO/NP 3575
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities 10.99 TC 17/SC 12
ISO 3575:2005
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities 90.92 TC 17/SC 12
ISO 4950-1:1995
High yield strength flat steel products -- Part 1: General requirements 90.93 TC 17/SC 3
ISO 4950-1:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO 4950-2:1995
High yield strength flat steel products -- Part 2: Products supplied in the normalized or controlled rolled condition 90.93 TC 17/SC 3
ISO 4950-2:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO 4950-3:1995
High yield strength flat steel products -- Part 3: Products supplied in the heat-treated (quenched + tempered) condition 90.93 TC 17/SC 3
ISO 4950-3:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO 4960:2007
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % 60.60 TC 17/SC 12
ISO 4995:2008
Hot-rolled steel sheet of structural quality 60.60 TC 17/SC 12
ISO 4996:2007
Hot-rolled steel sheet of high yield stress structural quality 60.60 TC 17/SC 12
ISO 4997:2007
Cold-reduced carbon steel sheet of structural quality 60.60 TC 17/SC 12
ISO 4998:2005
Continuous hot-dip zinc-coated carbon steel sheet of structural quality 90.92 TC 17/SC 12
ISO/CD 4998
Continuous hot-dip zinc-coated carbon steel sheet of structural quality 30.20 TC 17/SC 12
ISO 4999:2005
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities 90.92 TC 17/SC 12
ISO/CD 4999
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities 30.20 TC 17/SC 12
ISO/CD 5000
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities 30.20 TC 17/SC 12
ISO 5000:2005
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities 90.92 TC 17/SC 12
ISO 5001:2007
Cold-reduced carbon steel sheet for vitreous enamelling 60.60 TC 17/SC 12
ISO 5002:2008
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 5950:2008
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 5951:2008
Hot-rolled steel sheet of higher yield strength with improved formability 60.60 TC 17/SC 12
ISO/CD 5952
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance 30.20 TC 17/SC 12
ISO 5952:2005
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance 90.92 TC 17/SC 12
ISO 5954:2007
Cold-reduced carbon steel sheet according to hardness requirements 60.60 TC 17/SC 12
ISO 6316:2008
Hot-rolled steel strip of structural quality 60.60 TC 17/SC 12
ISO 6317:2008
Hot-rolled carbon steel strip of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 6930-1:2001
High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels 90.93 TC 17/SC 3
ISO 6930-2:2004
High yield strength steel plates and wide flats for cold forming -- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels 90.93 TC 17/SC 3
ISO 6932:2008
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % 60.60 TC 17/SC 12
ISO/NP 7452
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 10.99 TC 17/SC 3
ISO 7452:2002
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 90.92 TC 17/SC 3
ISO 7778:1983
Steel plate with specified through-thickness characteristics 90.93 TC 17/SC 3
ISO 7788:1985
Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements 90.93 TC 17/SC 3
ISO 9034:1987
Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape 90.60 TC 17/SC 3
ISO/CD 9328-1
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 30.99 TC 17/SC 10
ISO 9328-1:2003
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.92 TC 17/SC 10
ISO 9328-2:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 90.92 TC 17/SC 10
ISO/CD 9328-2
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 30.99 TC 17/SC 10
ISO 9328-3:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized 90.93 TC 17/SC 10
ISO 9328-3:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-4:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9328-4:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-5:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled 90.93 TC 17/SC 10
ISO 9328-5:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-6:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered 90.93 TC 17/SC 10
ISO 9328-6:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-7:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 90.92 TC 17/SC 10
ISO/CD 9328-7
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 30.99 TC 17/SC 10
ISO 9364:2006
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities 90.60 TC 17/SC 12
ISO 9444-1:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9444-2:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate 60.60 TC 17/SC 4
ISO 9445-1:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9445-2:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet 60.60 TC 17/SC 4
ISO 9473-1:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel 90.60 TC 72/SC 3
ISO 9473-2:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 2: Hardened strip steel 90.60 TC 72/SC 3
ISO 10384:2008
Hot-rolled carbon steel sheet as defined by chemical composition 60.60 TC 17/SC 12
ISO 11949:1995
Cold-reduced electrolytic tinplate 90.93 TC 17
ISO 11950:1995
Cold-reduced electrolytic chromium/chromium oxide-coated steel 90.93 TC 17
ISO 11951:1995
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel 90.93 TC 17
ISO 13887:2004
Cold-reduced steel sheet of higher yield strength with improved formability 90.60 TC 17/SC 12
ISO 13976:2005
Hot-rolled steel sheet in coils of structural quality and heavy thickness 90.60 TC 17/SC 12
ISO 14590:2005
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability 90.60 TC 17/SC 12
ISO/CD 14788
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet 30.20 TC 17/SC 12
ISO 14788:2005
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet 90.92 TC 17/SC 12
ISO/CD 16160
Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances 30.20 TC 17/SC 12
ISO 16160:2005
Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances 90.92 TC 17/SC 12
ISO 16162:2005
Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances 90.92 TC 17/SC 12
ISO/CD 16162
Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances 30.20 TC 17/SC 12
ISO 16163:2005
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances 90.92 TC 17/SC 12
ISO/CD 16163
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances 30.20 TC 17/SC 12
ISO 16172:2006
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe 90.60 TC 17/SC 12
ISO 17577:2006
Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm 90.20 TC 17/SC 7
ISO 18286:2008
Hot-rolled stainless steel plates -- Tolerances on dimensions and shape 60.60 TC 17/SC 4
ISO 20805:2005
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming 90.92 TC 17/SC 12
ISO/NP 20805
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming 10.99 TC 17/SC 12

77.140.60 Steel bars and rods
Standard and/or project TC
ISO 722:1991
Rock drilling equipment -- Hollow drill steels in bar form, hexagonal and round 90.93 TC 82
ISO 1035-1:1980
Hot-rolled steel bars -- Part 1: Dimensions of round bars 90.93 TC 17
ISO 1035-2:1980
Hot-rolled steel bars -- Part 2: Dimensions of square bars 90.93 TC 17
ISO 1035-3:1980
Hot-rolled steel bars -- Part 3: Dimensions of flat bars 90.93 TC 17
ISO 1035-4:1982
Hot-rolled steel bars -- Part 4: Tolerances 90.93 TC 17
ISO 2938:1974
Hollow steel bars for machining 90.93 TC 5/SC 1
ISO 4951-1:2001
High yield strength steel bars and sections -- Part 1: General delivery requirements 90.93 TC 17/SC 3
ISO 4951-2:2001
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels 90.93 TC 17/SC 3
ISO 4951-3:2001
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels 90.93 TC 17/SC 3
ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions 90.93 TC 17/SC 4
ISO 16120-1:2001
Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements 90.92 TC 17/SC 17
ISO/CD 16120-1
Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements 30.60 TC 17/SC 17
ISO/CD 16120-2
Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod 30.60 TC 17/SC 17
ISO 16120-2:2001
Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod 90.92 TC 17/SC 17
ISO 16120-3:2001
Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod 90.92 TC 17/SC 17
ISO/CD 16120-3
Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod 30.60 TC 17/SC 17
ISO/CD 16120-4
Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications 30.60 TC 17/SC 17
ISO 16120-4:2001
Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications 90.92 TC 17/SC 17
ISO 20723:2004
Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements 90.93 TC 17/SC 3

77.140.65 Steel wire, wire ropes and link chains
Lifting link chains and wire ropes, see 53.020.30
Steel wire for springs, see 77.140.25
Standard and/or project TC
ISO 2232:1990
Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes -- Specifications 90.93 TC 105
ISO 2408:2004
Steel wire ropes for general purposes -- Minimum requirements 90.93 TC 105
ISO 2532:1974
Steel wire ropes -- Vocabulary 90.93 TC 105
ISO 2701:1977
Drawn wire for general purpose non-alloy steel wire ropes -- Terms of acceptance 90.20 TC 105
ISO 3108:1974
Steel wire ropes for general purposes -- Determination of actual breaking load 90.93 TC 105
ISO 3189-1:1985
Sockets for wire ropes for general purposes -- Part 1: General characteristics and conditions of acceptance 90.93 TC 105
ISO 3189-1:1985/Cor 1:2002
60.60 TC 105
ISO 3189-2:1985
Sockets for wire ropes for general purposes -- Part 2: Special requirements for sockets produced by forging or machined from the solid 90.93 TC 105
ISO 3189-3:1985
Sockets for wire ropes for general purposes -- Part 3: Special requirements for sockets produced by casting 90.93 TC 105
ISO 4101:1983
Drawn steel wire for elevator ropes -- Specifications 90.93 TC 105
ISO 4344:2004
Steel wire ropes for lifts -- Minimum requirements 90.93 TC 105
ISO 4345:1988
Steel wire ropes -- Fibre main cores -- Specification 90.20 TC 105
ISO 4346:1977
Steel wire ropes for general purposes -- Lubricants -- Basic requirements 90.93 TC 105
ISO 6984:1990
Round non-alloy steel wires for stranded wire ropes for mine hoisting -- Specifications 90.93 TC 105
ISO 7531:1987
Wire rope slings for general purposes -- Characteristics and specifications 90.93 TC 105
ISO 7900:2006
Steel wire and wire products for fences -- Zinc- and zinc-alloy-coated steel barbed wire 90.20 TC 17/SC 17
ISO 7989-1:2006
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 1: General principles 90.20 TC 17/SC 17
ISO 7989-2:2007
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 2: Zinc or zinc-alloy coating 60.60 TC 17/SC 17
ISO 8792:1986
Wire rope slings -- Safety criteria and inspection procedures for use 90.93 TC 105
ISO 8793:1986
Steel wire ropes -- Ferrule-secured eye terminations 90.93 TC 105
ISO 8794:1986
Steel wire ropes -- Spliced eye terminations for slings 90.93 TC 105
ISO 9975:1990
Round non-alloy steel wires for locked coil mine winding ropes -- Specifications 90.93 TC 105
ISO 10425:2003
Steel wire ropes for the petroleum and natural gas industries -- Minimum requirements and terms of acceptance 90.93 TC 105
ISO 12076:2002
Steel wire ropes -- Determination of the actual modulus of elasticity 90.93 TC 105
ISO 16124:2004
Steel wire rod -- Dimensions and tolerances 90.93 TC 17/SC 17
ISO 16143-3:2005
Stainless steels for general purposes -- Part 3: Wire 90.93 TC 17/SC 4
ISO 16650:2004
Bead wire 90.93 TC 17/SC 17
ISO 17558:2006
Steel wire ropes -- Socketing procedures -- Molten metal and resin socketing 90.20 TC 105
ISO 17832:2009
Non-parallel steel wire and cords for tyre reinforcement 60.60 TC 17/SC 17
ISO 17893:2004
Steel wire ropes -- Vocabulary, designation and classification 90.93 TC 105
ISO 17893:2004/DAmd 1
40.20 TC 105
ISO 21669:2005
Steel wire ropes -- Determination of rotational properties 90.93 TC 105
ISO 22034-1:2007
Steel wire and wire products -- Part 1: General test methods 60.60 TC 17/SC 17
ISO 22034-2:2007
Steel wire and wire products -- Part 2: Tolerances on wire dimensions 60.60 TC 17/SC 17
ISO 23717:2006
Steel wire and wire products -- Hose reinforcement wire 90.20 TC 17/SC 17

77.140.70 Steel profiles
Including sections
Standard and/or project TC
ISO 657-1:1989
Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions 90.20 TC 17
ISO 657-2:1989
Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions 90.20 TC 17
ISO 657-5:1976
Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series 90.93 TC 17
ISO 657-11:1980
Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties 90.93 TC 17
ISO 657-15:1980
Hot-rolled steel sections -- Part 15: Sloping flange beam sections (Metric series) -- Dimensions and sectional properties 90.93 TC 17
ISO 657-16:1980
Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties 90.93 TC 17
ISO 657-18:1980
Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances 90.93 TC 17
ISO 657-19:1980
Hot-rolled steel sections -- Part 19: Bulb flats (metric series) -- Dimensions, sectional properties and tolerances 90.93 TC 17
ISO 657-21:1983
Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions 90.20 TC 17
ISO 4951-1:2001
High yield strength steel bars and sections -- Part 1: General delivery requirements 90.93 TC 17/SC 3
ISO 4951-2:2001
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels 90.93 TC 17/SC 3
ISO 4951-3:2001
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels 90.93 TC 17/SC 3
ISO 7452:2002
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 90.92 TC 17/SC 3
ISO/NP 7452
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 10.99 TC 17/SC 3
ISO 20723:2004
Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements 90.93 TC 17/SC 3
ISO 24314:2006
Structural steels -- Structural steels for building with improved seismic resistance -- Technical delivery conditions 60.60 TC 17/SC 3

77.140.75 Steel pipes and tubes for specific use
Including hollow steel bars and sections for construction
Steel pipes for conducting fluids, see 23.040.10
Standard and/or project TC
ISO 559:1991
Steel tubes for water and sewage 90.93 TC 5/SC 1
ISO 630-2:2000
Structural steels -- Part 2: Technical delivery requirements for hot-finished hollow sections 90.92 TC 5/SC 1
ISO 657-14:2000
Hot-rolled steel sections -- Part 14: Hot-finished structural hollow sections -- Dimensions and sectional properties 90.92 TC 5/SC 1
ISO 1129:1980
Steel tubes for boilers, superheaters and heat exchangers -- Dimensions, tolerances and conventional masses per unit length 90.93 TC 5/SC 1
ISO 2037:1992
Stainless steel tubes for the food industry 90.93 TC 5/SC 1
ISO/FDIS 2531
Ductile iron pipes, fittings, accessories and their joints for water applications 50.00 TC 5/SC 2
ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications 90.92 TC 5/SC 2
ISO 2937:1974
Plain end seamless steel tubes for mechanical application 90.93 TC 5/SC 1
ISO 3183:2007
Petroleum and natural gas industries -- Steel pipe for pipeline transportation systems 60.60 TC 67/SC 2
ISO 4019:2001
Structural steels -- Cold-formed, welded, structural hollow sections -- Dimensions and sectional properties 90.92 TC 5/SC 1
ISO 4179:2005
Ductile iron pipes and fittings for pressure and non-pressure pipelines -- Cement mortar lining 90.60 TC 5/SC 2
ISO 6594:2006
Cast iron drainage pipes and fittings -- Spigot series 90.93 TC 5/SC 2
ISO 6758:1980
Welded steel tubes for heat exchangers 90.20 TC 17/SC 19
ISO 6759:1980
Seamless steel tubes for heat exchangers 90.20 TC 17/SC 19
ISO 9302:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 9303:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9304:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections 90.92 TC 17/SC 19
ISO 9305:1989
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9329-1:1989
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties 90.60 TC 17/SC 19
ISO 9329-2:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties 90.60 TC 17/SC 19
ISO 9329-3:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties 90.60 TC 17/SC 19
ISO 9329-4:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels 90.60 TC 17/SC 19
ISO 9330-1:1990
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties 90.93 TC 17/SC 19
ISO 9330-2:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.60 TC 17/SC 19
ISO 9330-3:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties 90.60 TC 17/SC 19
ISO 9330-4:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.93 TC 17/SC 19
ISO 9330-5:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties 90.93 TC 17/SC 19
ISO 9330-6:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes 90.60 TC 17/SC 19
ISO 9349:2004
Preinsulated ductile iron pipeline systems 90.93 TC 5/SC 2
ISO 9402:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9598:1989
Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9764:1989
Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9765:1990
Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections 90.92 TC 17/SC 19
ISO 10124:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO/DIS 10332
Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness as a substitution for the hydraulic test 40.20 TC 17/SC 19
ISO 10332:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 10543:1993
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing 90.92 TC 17/SC 19
ISO 10763:1994
Hydraulic fluid power -- Plain-end, seamless and welded precision steel tubes -- Dimensions and nominal working pressures 90.93 TC 131/SC 4
ISO 10799:2001
Structural steels -- Cold-formed, welded, structural hollow sections -- Technical delivery requirements 90.92 TC 5/SC 1
ISO/DIS 10799-1
Cold formed welded structural hollow sections of non-alloy and fine grain steels -- Part 1: Technical delivery conditions 40.99 TC 5/SC 1
ISO/DIS 10799-2
Cold formed welded structural hollow sections of non-alloy and fine grain steels -- Part 2: Dimensions and sectional properties 40.99 TC 5/SC 1
ISO/DIS 10893-1
Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test 40.20 TC 17/SC 19
ISO/DIS 10893-2
Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-3
Non-destructive testing of steel tubes -- Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-4
Non-destructive testing of steel tubes -- Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-5
Non-destructive testing of steel tubes -- Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-6
Non-destructive testing of steel tubes -- Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-7
Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-8
Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-9
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes 40.20 TC 17/SC 19
ISO/DIS 10893-10
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-11
Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-12
Non-destructive testing of steel tubes -- Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 40.20 TC 17/SC 19
ISO 11496:1993
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 11960:2004
Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells 90.92 TC 67/SC 5
ISO/DIS 11960
Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells 40.92 TC 67/SC 5
ISO 11960:2004/Cor 1:2006
60.60 TC 67/SC 5
ISO 11961:2008
Petroleum and natural gas industries -- Steel drill pipe 60.60 TC 67/SC 5
ISO 11961:2008/Cor 1:2009
60.60 TC 67/SC 5
ISO 12095:1994
Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing 90.92 TC 17/SC 19
ISO 12096:1996
Submerged arc-welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections 90.92 TC 17/SC 19
ISO/DIS 12633-1
Hot finished structural hollow sections of non-alloy and fine grain steels -- Part 1: Technical delivery conditions 40.99 TC 5/SC 1
ISO/DIS 12633-2
Hot finished structural hollow sections of non-alloy and fine grain steels -- Part 2: Dimensions and sectional properties 40.99 TC 5/SC 1
ISO 13663:1995
Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13664:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13665:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections 90.92 TC 17/SC 19
ISO 13680:2008
Petroleum and natural gas industries -- Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock -- Technical delivery conditions 60.60 TC 67/SC 5
ISO 16132:2004
Ductile iron pipes and fittings -- Seal coats for cement mortar linings 90.93 TC 5/SC 2

77.140.80 Iron and steel castings
Standard and/or project TC
ISO 3755:1991
Cast carbon steels for general engineering purposes 90.60 TC 17/SC 11
ISO 4986:1992
Steel castings -- Magnetic particle inspection 90.92 TC 17/SC 11
ISO/DIS 4986
Steel and iron castings -- Magnetic particle inspection 40.99 TC 17/SC 11
ISO/DIS 4987
Steel and iron castings -- Liquid penetrant inspection 40.99 TC 17/SC 11
ISO 4987:1992
Steel castings -- Penetrant inspection 90.92 TC 17/SC 11
ISO 4990:2003
Steel castings -- General technical delivery requirements 90.60 TC 17/SC 11
ISO 4991:2005
Steel castings for pressure purposes 90.60 TC 17/SC 11
ISO 4992-1:2006
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes 90.60 TC 17/SC 11
ISO 4992-2:2006
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components 90.60 TC 17/SC 11
ISO 4993:2009
Steel and iron castings -- Radiographic inspection 60.60 TC 17/SC 11
ISO 7186:1996
Ductile iron products for sewage applications 90.92 TC 5/SC 2
ISO/CD 7186
Ductile iron products for sewage applications 30.99 TC 5/SC 2
ISO 9477:1992
High strength cast steels for general engineering and structural purposes 90.60 TC 17/SC 11
ISO/DIS 10679
Steel -- Cast tool steel 40.99 TC 17/SC 11
ISO 11970:2001
Specification and approval of welding procedures for production welding of steel castings 90.60 TC 17/SC 11
ISO 11971:2008
Steel and iron castings -- Visual examination of surface quality 60.60 TC 17/SC 11
ISO 11972:1998
Corrosion-resistant cast steels for general applications 90.60 TC 17/SC 11
ISO 11973:1999
Heat-resistant cast steels and alloys for general applications 90.20 TC 17/SC 11
ISO 13520:2002
Determination of ferrite content in austenitic stainless steel castings 90.60 TC 17/SC 11
ISO 13521:1999
Austenitic manganese steel castings 90.20 TC 17/SC 11
ISO 13583-1:2000
Centrifugally cast steel and alloy products -- Part 1: General testing and tolerances 90.60 TC 17/SC 11
ISO 13583-2:2003
Centrifugally cast steel and alloy products -- Part 2: Heat resistant materials 90.60 TC 17/SC 11
ISO 14737:2003
Cast non-alloy and low alloy steels for general applications 90.60 TC 17/SC 11
ISO 16468:2005
Investment castings (steel, nickel alloys and cobalt alloys) -- General technical requirements 90.60 TC 17/SC 11
ISO 19959:2005
Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys 90.60 TC 17/SC 11
ISO 19960:2005
Cast steels and alloys with special physical properties 90.60 TC 17/SC 11

77.140.85 Iron and steel forgings
Standard and/or project TC
ISO 9327-1:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.93 TC 17/SC 10
ISO 9327-2:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties 90.93 TC 17/SC 10
ISO 9327-3:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9327-4:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength 90.93 TC 17/SC 10
ISO 9327-5:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels 90.93 TC 17/SC 10
ISO/TR 15461:1997
Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests 60.60 TC 17/SC 10

77.140.99 Other iron and steel products
Standard and/or project TC
ISO 1005-1:1994
Railway rolling stock material -- Part 1: Rough-rolled tyres for tractive and trailing stock -- Technical delivery conditions 90.20 TC 17
ISO 1005-2:1986
Railway rolling stock material -- Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock -- Dimensional, balancing and assembly requirements 90.93 TC 17
ISO 1005-3:1982
Railway rolling stock material -- Part 3: Axles for tractive and trailing stock -- Quality requirements 90.20 TC 17
ISO 1005-4:1986
Railway rolling stock material -- Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock -- Quality requirements 90.93 TC 17
ISO 1005-6:1994
Railway rolling stock material -- Part 6: Solid wheels for tractive and trailing stock -- Technical delivery conditions 90.20 TC 17
ISO 1005-7:1982
Railway rolling stock material -- Part 7: Wheelsets for tractive and trailing stock -- Quality requirements 90.20 TC 17
ISO 1005-8:1986
Railway rolling stock material -- Part 8: Solid wheels for tractive and trailing stock -- Dimensional and balancing requirements 90.93 TC 17
ISO 1005-9:1986
Railway rolling stock material -- Part 9: Axles for tractive and trailing stock -- Dimensional requirements 90.93 TC 17
ISO 14657:2005
Zinc-coated steel for the reinforcement of concrete 90.93 TC 17/SC 16

77.150 Products of non-ferrous metals
Including products of non-ferrous metal alloys
Products of non-ferrous metals for aerospace construction, see 49.025
77.150.01 Products of non-ferrous metals in general
Standard and/or project TC
ISO/AWI 3134
Aluminium and aluminium alloys -- Terms and definition -- General terms 20.00 TC 79
ISO 3134-1:1985
Light metals and their alloys -- Terms and definitions -- Part 1: Materials 90.92 TC 79
ISO 3134-2:1985
Light metals and their alloys -- Terms and definitions -- Part 2: Unwrought products 90.92 TC 79
ISO 3134-3:1985
Light metals and their alloys -- Terms and definitions -- Part 3: Wrought products 90.92 TC 79
ISO 3134-4:1985
Light metals and their alloys -- Terms and definitions -- Part 4: Castings 90.92 TC 79
ISO 6537:1982
Pneumatic fluid power systems -- Cylinder barrels -- Requirements for non-ferrous metallic tubes 90.93 TC 131/SC 3

77.150.10 Aluminium products
Standard and/or project TC
ISO 209:2007
Aluminium and aluminium alloys -- Chemical composition 60.60 TC 79/SC 6
ISO 2378:1972
Aluminium alloy chill castings -- Reference test bar 90.93 TC 79/SC 7
ISO 2379:1972
Aluminium alloy sand castings -- Reference test bar 90.93 TC 79/SC 7
ISO 3522:2007
Aluminium and aluminium alloys -- Castings -- Chemical composition and mechanical properties 60.60 TC 79/SC 7
ISO 5193:1981
Wrought aluminium and aluminium alloys -- Drawn round bars -- Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter) 90.92 TC 79/SC 6
ISO 6279:2006
Plain bearings -- Aluminium alloys for solid bearings 90.60 TC 123/SC 2
ISO/CD 6361-1
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 1: Technical conditions for inspection and delivery 30.60 TC 79/SC 6
ISO 6361-1:1986
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6361-2:1990
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO/CD 6361-2
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 2: Mechanical properties 30.60 TC 79/SC 6
ISO/CD 6361-3
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 3: Strips -- Tolerances on shape and dimensions 30.60 TC 79/SC 6
ISO 6361-3:1985
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 3: Strips -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO/CD 6361-4
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 4: Sheets and plates -- Tolerances on form and dimensions 30.60 TC 79/SC 6
ISO 6361-4:1988
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 4: Sheets and plates -- Tolerances on form and dimensions 90.92 TC 79/SC 6
ISO/CD 6361-5
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 5: Chemical composition 30.60 TC 79/SC 6
ISO 6362-1:1986
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6362-2:1990
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO 6362-3:2001
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 3: Extruded rectangular bars -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO 6362-4:1988
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 4: Extruded profiles -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO 6362-5:2001
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 5: Extruded round, square and hexagonal bars -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO 6363-1:1988
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6363-2:1993
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO 6363-4:1991
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 4: Drawn rectangular bars -- Tolerances on form and dimensions 90.92 TC 79/SC 6
ISO 6363-5:1992
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 5: Drawn square and hexagonal bars -- Tolerances on form and dimensions 90.92 TC 79/SC 6
ISO 6365-1:1988
Wrought aluminium and aluminium alloy cold-drawn wire -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO/CD 7271
Aluminium and aluminium alloys -- Foil and thin strip -- Dimensional tolerances 30.20 TC 79/SC 6
ISO 7271:1982
Aluminium and aluminium alloys -- Foil and thin strip -- Dimensional tolerances 90.92 TC 79/SC 6
ISO 7274:1981
Wrought aluminium and aluminium alloys -- Drawn round bars -- Tolerances on shape and dimensions (All minus tolerances on diameter) 90.93 TC 79/SC 6
ISO 7722:1985
Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes -- General conditions for inspection and delivery 90.93 TC 79/SC 7
ISO/NP 13085
Petroleum and natural gas industries -- Aluminium alloy pipe for use as tubing for wells 10.99 TC 67
ISO/NP 15546
Petroleum and natural gas industries -- Aluminium alloy drill pipe 10.99 TC 67
ISO 15546:2007
Petroleum and natural gas industries -- Aluminium alloy drill pipe 90.92 TC 67
ISO/NP 27627
Petroleum and natural gas industries -- Aluminium alloy drill pipe thread connection gauging 10.99 TC 67

77.150.20 Magnesium products
Standard and/or project TC
ISO 2377:1972
Magnesium alloy sand castings -- Reference test bar 90.60 TC 79/SC 5
ISO 7773:1983
Magnesium alloys -- Round bars and tubes -- Dimensional tolerances 90.60 TC 79/SC 5
ISO 16220:2005
Magnesium and magnesium alloys -- Magnesium alloy ingots and castings 90.60 TC 79/SC 5
ISO 16220:2005/Amd 1:2007
Additional alloys 60.60 TC 79/SC 5

77.150.30 Copper products
Standard and/or project TC
ISO 197-1:1983
Copper and copper alloys -- Terms and definitions -- Part 1: Materials 90.20 TC 26
ISO 197-2:1983
Copper and copper alloys -- Terms and definitions -- Part 2: Unwrought products (Refinery shapes) 90.20 TC 26
ISO 197-3:1983
Copper and copper alloys -- Terms and definitions -- Part 3: Wrought products 90.20 TC 26
ISO 197-4:1983
Copper and copper alloys -- Terms and definitions -- Part 4: Castings 90.20 TC 26
ISO 431:1981
Copper refinery shapes 90.20 TC 26

77.150.40 Nickel and chromium products
Standard and/or project TC
ISO 6208:1992
Nickel and nickel alloy plate, sheet and strip 90.60 TC 155/SC 2
ISO 6372-3:1989
Nickel and nickel alloys -- Terms and definitions -- Part 3: Wrought products and castings 90.93 TC 155
ISO 9722:1992
Nickel and nickel alloys -- Composition and forms of wrought products 90.60 TC 155/SC 2
ISO 9723:1992
Nickel and nickel alloy bars 90.60 TC 155/SC 2
ISO 9724:1992
Nickel and nickel alloy wire and drawing stock 90.60 TC 155/SC 2
ISO 9725:1992
Nickel and nickel alloy forgings 90.60 TC 155/SC 2
ISO 12725:1997
Nickel and nickel alloy castings 90.60 TC 155/SC 2

77.150.50 Titanium products
Standard and/or project TC
ISO 25902-1:2009
Titanium pipes and tubes -- Non-destructive testing -- Part 1: Eddy-current examination 60.60 TC 79/SC 11
ISO/DIS 25902-2
Titanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic examination for the detection of longitudinal flaws 40.60 TC 79/SC 11

77.150.60 Lead, zinc and tin products
77.150.70 Cadmium and cobalt products
77.150.99 Other products of non-ferrous metals

77.160 Powder metallurgy
Including sintered metal materials and hard metals
Standard and/or project TC
ISO 2738:1999
Sintered metal materials, excluding hardmetals -- Permeable sintered metal materials -- Determination of density, oil content and open porosity 90.20 TC 119/SC 3
ISO 2739:2006
Sintered metal bushes -- Determination of radial crushing strength 90.92 TC 119/SC 3
ISO 2740:2009
Sintered metal materials, excluding hardmetals -- Tensile test pieces 60.60 TC 119/SC 3
ISO 3252:1999
Powder metallurgy -- Vocabulary 90.20 TC 119
ISO 3312:1987
Sintered metal materials and hardmetals -- Determination of Young modulus 90.20 TC 119/SC 3
ISO 3325:1996
Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength 90.93 TC 119/SC 3
ISO 3325:1996/Amd 1:2001
Precision statement 60.60 TC 119/SC 3
ISO 3326:1975
Hardmetals -- Determination of (the magnetization) coercivity 90.93 TC 119/SC 4
ISO 3327:2009
Hardmetals -- Determination of transverse rupture strength 60.60 TC 119/SC 4
ISO 3369:2006
Impermeable sintered metal materials and hardmetals -- Determination of density 90.92 TC 119/SC 3
ISO 3738-1:1982
Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method 90.93 TC 119/SC 4
ISO 3738-2:1988
Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks 90.93 TC 119/SC 4
ISO 3878:1983
Hardmetals -- Vickers hardness test 90.93 TC 119/SC 4
ISO 3907:1985
Hardmetals -- Determination of total carbon content -- Gravimetric method 90.92 TC 119/SC 4
ISO/FDIS 3907
Hardmetals -- Determination of total carbon -- Gravimetric method 50.20 TC 119/SC 4
ISO 3908:1985
Hardmetals -- Determination of insoluble (free) carbon content -- Gravimetric method 90.92 TC 119/SC 4
ISO/FDIS 3908
Hardmetals -- Determination of insoluble (free) carbon -- Gravimetric method 50.20 TC 119/SC 4
ISO 3909:1976
Hardmetals -- Determination of cobalt -- Potentiometric method 90.93 TC 119/SC 4
ISO 3923-1:2008
Metallic powders -- Determination of apparent density -- Part 1: Funnel method 60.60 TC 119/SC 2
ISO 3923-2:1981
Metallic powders -- Determination of apparent density -- Part 2: Scott volumeter method 90.92 TC 119/SC 2
ISO 3927:2001
Metallic powders, excluding powders for hardmetals -- Determination of compressibility in uniaxial compression 90.93 TC 119/SC 2
ISO 3927:2001/Cor 1:2008
60.60 TC 119/SC 2
ISO 3928:1999
Sintered metal materials, excluding hardmetals -- Fatigue test pieces 90.92 TC 119/SC 3
ISO 3953:1993
Metallic powders -- Determination of tap density 90.60 TC 119/SC 2
ISO 3954:2007
Powders for powder metallurgical purposes -- Sampling 60.60 TC 119/SC 2
ISO 3995:1985
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts 90.60 TC 119/SC 2
ISO 4003:1977
Permeable sintered metal materials -- Determination of bubble test pore size 90.93 TC 119/SC 3
ISO 4022:1987
Permeable sintered metal materials -- Determination of fluid permeability 90.20 TC 119/SC 3
ISO 4489:1978
Sintered hardmetals -- Sampling and testing 90.93 TC 119/SC 4
ISO 4490:2008
Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter) 60.60 TC 119/SC 2
ISO 4491-1:1989
Metallic powders -- Determination of oxygen content by reduction methods -- Part 1: General guidelines 90.93 TC 119/SC 2
ISO 4491-2:1997
Metallic powders -- Determination of oxygen content by reduction methods -- Part 2: Loss of mass on hydrogen reduction (hydrogen loss) 90.93 TC 119/SC 2
ISO 4491-3:1997
Metallic powders -- Determination of oxygen content by reduction methods -- Part 3: Hydrogen-reducible oxygen 90.93 TC 119/SC 2
ISO 4491-4:1989
Metallic powders -- Determination of oxygen content by reduction methods -- Part 4: Total oxygen by reduction-extraction 90.93 TC 119/SC 2
ISO 4492:1985
Metallic powders, excluding powders for hardmetals -- Determination of dimensional changes associated with compacting and sintering 90.93 TC 119/SC 2
ISO 4496:1978
Metallic powders -- Determination of acid insoluble content in iron, copper, tin and bronze powders 90.93 TC 119/SC 2
ISO 4497:1983
Metallic powders -- Determination of particle size by dry sieving 90.93 TC 119/SC 2
ISO 4498:2005
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness 90.93 TC 119/SC 3
ISO 4498-1:1990
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 1: Materials of essentially uniform section hardness 90.93 TC 119/SC 3
ISO 4498-2:1981
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen 90.93 TC 119/SC 3
ISO 4499-1:2008
Hardmetals -- Metallographic determination of microstructure -- Part 1: Photomicrographs and description 60.60 TC 119/SC 4
ISO 4499-2:2008
Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size 60.60 TC 119/SC 4
ISO 4501:1978
Hardmetals -- Determination of titanium -- Photometric peroxide method 90.93 TC 119/SC 4
ISO 4503:1978
Hardmetals -- Determination of contents of metallic elements by X-ray fluorescence -- Fusion method 90.93 TC 119/SC 4
ISO 4505:1978
Hardmetals -- Metallographic determination of porosity and uncombined carbon 90.93 TC 119/SC 4
ISO 4506:1979
Hardmetals -- Compression test 90.93 TC 119/SC 4
ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth by a micro-hardness test 90.93 TC 119/SC 3
ISO 4883:1978
Hardmetals -- Determination of contents of metallic elements by X-ray fluorescence -- Solution method 90.93 TC 119/SC 4
ISO 4884:1978
Hardmetals -- Sampling and testing of powders using sintered test pieces 90.93 TC 119/SC 4
ISO 5754:1978
Sintered metal materials, excluding hardmetals -- Unnotched impact test piece 90.20 TC 119/SC 3
ISO/WD 5755
Sintered metal materials -- Specifications 20.20 TC 119/SC 5
ISO 5755:2001
Sintered metal materials -- Specifications 90.92 TC 119/SC 5
ISO 7625:2006
Sintered metal materials, excluding hardmetals -- Preparation of samples for chemical analysis for determination of carbon content 90.20 TC 119/SC 3
ISO 7627-1:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 1: General requirements 90.93 TC 119/SC 4
ISO 7627-2:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) 90.93 TC 119/SC 4
ISO 7627-3:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) 90.93 TC 119/SC 4
ISO 7627-4:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) 90.93 TC 119/SC 4
ISO 7627-5:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) 90.93 TC 119/SC 4
ISO 7627-6:1985
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) 90.93 TC 119/SC 4
ISO 10070:1991
Metallic powders -- Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions 90.93 TC 119/SC 2
ISO 10076:1991
Metallic powders -- Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement 90.93 TC 119/SC 2
ISO 11873:2005
Hardmetals -- Determination of sulfur and carbon contents in cobalt metal powders -- Infrared detection method 90.93 TC 119/SC 4
ISO 11873:2005/Cor 1:2008
60.60 TC 119/SC 4
ISO/DIS 11876
Hardmetals -- Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders -- Flame atomic absorption spectrometric method 40.60 TC 119/SC 4
ISO 11877:2008
Hardmetals -- Determination of silicon in cobalt metal powders -- Photometric method 60.60 TC 119/SC 4
ISO 13944:1996
Lubricated metal-powder mixes -- Determination of lubricant content -- Modified Soxhlet extraction method 90.60 TC 119/SC 2
ISO 13947:2007
Metallic powders -- Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen 60.60 TC 119/SC 2
ISO 14168:2003
Metallic powders, excluding hardmetals -- Method for testing copper-base infiltrating powders 90.60 TC 119/SC 2
ISO 14317:2006
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength 60.60 TC 119/SC 3
ISO/TR 14321:1997
Sintered metal materials, excluding hardmetals -- Metallographic preparation and examination 60.60 TC 119/SC 3
ISO 17352:2008
Hardmetals -- Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption 60.60 TC 119/SC 4
ISO 18549-1:2009
Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures 60.60 TC 119/SC 2
ISO 18549-2:2009
Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 2: Determination of flow rate at elevated temperatures 60.60 TC 119/SC 2
ISO/CD 22068
Sintered metal injection moulded materials -- Specifications 30.60 TC 119/SC 5
ISO/DIS 22394
Hardmetals -- Knoop hardness test 40.20 TC 119/SC 4
ISO/DIS 23519
Sintered metal materials, excluding hardmetals -- Measurement of surface roughness 40.60 TC 119/SC 3
ISO/DIS 26482
Hardmetals -- Determination of lead and cadmium 40.60 TC 119/SC 4
ISO 28079:2009
Hardmetals -- Palmqvist toughness test 60.60 TC 119/SC 4
ISO/CD 28080
Hardmetals -- Abrasion tests for hardmetals 30.92 TC 119/SC 4
ISO/DIS 28279
Sintered metal materials -- Determination of cleanliness of metallic- powder parts 40.60 TC 119/SC 3

77.180 Equipment for the metallurgical industry


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment