2009/09/07

Cheapest & Latest BSI Standard (PDF) (4)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 3155-001:2009 BS EN 3155-001:2009. Aerospace series. Electrical contacts used in elements of connection. Technical specification
BS EN 4604-003:2009 BS EN 4604-003:2009. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohm, 200 °C, type WZ. Product standard
BS EN 4604-006:2009 BS EN 4604-006:2009. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohm, 200 °C, type WM. Product standard
BS EN 4499:2009 BS EN 4499:2009. Aerospace series. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C
BS EN 3155-067:2009 BS EN 3155-067:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard
BS EN 3155-068:2009 BS EN 3155-068:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard
BS EN 3155-069:2009 BS EN 3155-069:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard
BS EN 4626-201:2009 BS EN 4626-201:2009. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contacts. Optical contact (sub-assembly) for receptacle. Product standard
BS EN 2854-003:2009 BS EN 2854-003:2009. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55 °C and 260 °C. Product standard
BS EN 2997-012:2009 BS EN 2997-012:2009. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Jam-nut for jam-nut receptacles. Product standard
BS EN 2997-013:2009 BS EN 2997-013:2009. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. O-ring seal for jam-nut receptacles. Product standard
BS EN 3373-010:2009 BS EN 3373-010:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series. Product standard
BS EN 3373-011:2009 BS EN 3373-011:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series. Product standard
BS EN 3375-009:2009 BS EN 3375-009:2009. Aerospace series. Cable, electrical, for digital data transmission. Single braid. CAN Bus. 120 Ohms. Type WX. Product standard
BS EN 3475-802:2009 BS EN 3475-802:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance unbalance
BS EN 3475-810:2009 BS EN 3475-810:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Structural return loss
09/30179503 DC 09/30179503 DC. BS ISO 29301. Microbeam analysis. Analytical transmission electron microscopy. Methods for calibrating image magnification by using reference materials giving a periodic diffraction pattern
09/30179580 DC 09/30179580 DC. BS EN ISO 29664. Plastics. Artificial weathering including acidic deposition
09/30179627 DC 09/30179627 DC. BS ISO 4007. Personal protective equipment. Eye and face protection. Vocabulary
09/30179758 DC 09/30179758 DC. BS EN 12044 AMD1. Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements
09/30179761 DC 09/30179761 DC. BS EN 930 AMD2. Footwear, leather and imitation leather goods manufacturing machines. Roughing, scouring, polishing and trimming machines. Safety requirements
09/30179764 DC 09/30179764 DC. BS EN 931 AMD2. Footwear manufacturing machines. Lasting machines. Safety requirements
09/30179767 DC 09/30179767 DC. BS EN 12653 AMD2. Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements
09/30179773 DC 09/30179773 DC. BS EN 12387 AMD1. Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
09/30179776 DC 09/30179776 DC. BS EN 12203 AMD1. Footwear, leather and imitation leather goods manufacturing machines. Shoe and leather presses. Safety requirements
09/30179845 DC 09/30179845 DC. BS EN 13112 AMD1. Tannery machines. Splitting and bandknife shearing machines. Safety requirements
09/30179854 DC 09/30179854 DC. BS EN 13114 AMD1. Tannery machines. Rotating process vessels. Safety requirements
09/30179882 DC 09/30179882 DC. BS ISO 4107. Commercial vehicles. Wheel hub attachment dimensions
09/30179909 DC 09/30179909 DC. BS ISO 22155. Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
ISO27085 : 2009 EDTN1 ISO27085 : 2009 EDTN1. ISO27085 : 2009 Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES
BS EN 13942:2009 BS EN 13942:2009. Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves
09/30180272 DC 09/30180272 DC. BS EN 934-3. Admixtures for concrete, mortar and grout. Part 3. Admixtures for masonry mortar. Definitions, requirements, conformity, marking and labelling
BS EN 1966:2009 BS EN 1966:2009. Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS EN 1465:2009 BS EN 1465:2009. Adhesives. Determination of tensile lap-shear strength of bonded assemblies
09/30180307 DC 09/30180307 DC. BS ISO 2004. Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
DD CEN ISO/TS 11133-1:2009 DD CEN ISO/TS 11133-1:2009. Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. General guidelines on quality assurance for the preparation of culture media in the laboratory
09/30180383 DC 09/30180383 DC. BS EN 61162-450. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 450. Multiple talkers and multiple listeners. Lightweight ship systems interconnection
09/30180393 DC 09/30180393 DC. BS EN ISO 10451. Dentistry. Contents of technical file for dental implant systems
09/30180415 DC 09/30180415 DC. NA to BS EN 1992-1-1 AMD1. Eurocode 2. Design of concrete structures. Part 1-1. General rules and rules for buildings
BS EN 61290-3-2:2008 BS EN 61290-3-2:2008. Optical amplifiers. Test methods. Noise figure parameters. Electrical spectrum analyzer method
09/30180587 DC 09/30180587 DC. BS ISO/IEC 24724. Information technology. Automatic identification and data capture techniques. GS1 DataBar bar code symbology specification
09/30180590 DC 09/30180590 DC. BS 8507-2. Code of practice for close protection services. Part 2. Services outside of the United Kingdom
09/30180605 DC 09/30180605 DC. BS ISO 8897. Oil of juniper berry (Juniperus communis L.)
09/30180608 DC 09/30180608 DC. BS ISO 10869. Oil of fir needle, Siberian (Abies sibirica Ledeb.)
PAS 1188-2:2009 PAS 1188-2:2009. Flood protection products. Specification. Temporary products
PAS 1188-3:2009 PAS 1188-3:2009. Flood protection products. Specification. Building skirt systems
PAS 1188-4:2009 PAS 1188-4:2009. Flood protection products. Specification. Demountable products
BS EN 50164-6:2009 BS EN 50164-6:2009. Lightning protection components (LPC). Requirements for lightning strike counters
09/30180869 DC 09/30180869 DC. BS EN 1501-2 AMD1. Refuse collection vehicles and associated lifting devices. General requirements and safety requirements. Part 2. Side loaded refuse collection vehicles
09/30180872 DC 09/30180872 DC. BS EN 1501-1 AMD2. Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 1. Rear-end loaded refuse collection vehicles
PD IEC/TR 62572-2:2008 PD IEC/TR 62572-2:2008. Fibre optic active components and devices. Reliability standards. Laser module degradation
09/30180963 DC 09/30180963 DC. BS ISO 11852. Rubber. Determination of magnesium content of field and concentrated natural rubber latex by titration
09/30181168 DC 09/30181168 DC. BS EN 1047-2. Secure storage units. Classification and methods of test for resistance to fire. Part 2. Data rooms and data container
DD IEC/PAS 62246-2-1:2008 DD IEC/PAS 62246-2-1:2008. Reed contact units. Heavy-duty reed switches. Quality assessment specification
09/30181191 DC 09/30181191 DC. BS 2B 23. Specification for copper-aluminium-nickel- iron alloy rods, sections, forging stock and forgings
09/30181193 DC 09/30181193 DC. BS 2B 24. Specification for copper-tin-phosphorous alloy rods and sections
09/30181195 DC 09/30181195 DC. BS 3B 25. Specification for copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated)
09/30181197 DC 09/30181197 DC. BS 3B 26. Specification for copper-nickel-silicon alloy rods, sections and parts (solution treated, cold worked and precipitation treated)
09/30181199 DC 09/30181199 DC. BS 3B 27. Specification for copper-zinc-aluminium- nickel-silicon alloy tube
09/30181201 DC 09/30181201 DC. BS 3B 28. Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
09/30181209 DC 09/30181209 DC. BS 3B 32. Specification for copper-beryllium alloy rods and sections (solution treated and precipitation treated)
09/30181211 DC 09/30181211 DC. BS 3B 33. Specification for copper-beryllium alloy wire (solution treated and precipitation treated)
09/30181213 DC 09/30181213 DC. BS 2B 100. Procedure for inspection, testing and acceptance of wrought copper alloys
09/30181274 DC 09/30181274 DC. BS ISO 10681-1. Road vehicles. Communication on FlexRay. Part 1. General requirements and use case definitions
09/30181277 DC 09/30181277 DC. BS ISO 10681-2. Road vehicles. Communication on FlexRay. Part 2. Communication layer services
09/30181283 DC 09/30181283 DC. BS ISO/IEC 24727-6. Identification cards. Integrated circuit card programming interfaces. Part 6. Registration authority procedures for the authentication protocols for interoperability
BS EN 61109:2008 BS EN 61109:2008. Insulators for overhead lines. Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria
09/30181333 DC 09/30181333 DC. BS ISO 22621-6. Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA). Part 6. Code of practice for design, handling and installation
09/30181371 DC 09/30181371 DC. BS ISO 29541. Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
BS EN 1594:2009 BS EN 1594:2009. Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 1594:2009 BS EN 1594:2009. Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
09/30181566 DC 09/30181566 DC. BS ISO 29481-1. Building information models. Information delivery manual. Part 1. Methodology and format
09/30181595 DC 09/30181595 DC. BS EN 62386-209. Digital addressable lighting interface. Part 209. Particular requirements for control gear. Colour control (Device Type 8)
09/30181599 DC 09/30181599 DC. BS EN 62386-210. Digital addressable lighting interface. Part 210. Particular requirements for control gears. Sequencer (device type 9)
09/30181658 DC 09/30181658 DC. BS EN 13157 AMD1. Cranes. Safety. Hand powered lifting equipment
09/30181661 DC 09/30181661 DC. BS EN 13035-3 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 3. Cutting machines
09/30181679 DC 09/30181679 DC. BS EN 13042-1 AMD1. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Part 1. Gob feeder
09/30181685 DC 09/30181685 DC. BS EN 13042-3 AMD1. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Part 3. IS machines
09/30181772 DC 09/30181772 DC. BS EN 1837 AMD1. Safety of machinery. Integral lighting of machines
BS EN ISO 10524-4:2008 BS EN ISO 10524-4:2008. Pressure regulators for use with medical gases. Low-pressure regulators
PAS 97:2009 PAS 97:2009. A specification for mail screening and security
09/30182170 DC 09/30182170 DC. BS EN 12978 AMD1. Industrial, commercial and garage doors and gates. Safety devices for power operated doors and gates. Requirements and test methods
09/30182290 DC 09/30182290 DC. BS EN 746-1 AMD1. Industrial thermoprocessing equipment. Part 1. Common safety requirements for industrial thermoprocessing equipment
09/30182344 DC 09/30182344 DC. BS EN 1953 AMD1. Atomising and spraying equipment for coating materials. Safety requirements
09/30182353 DC 09/30182353 DC. BS EN 12215 AMD1. Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements
BS EN 3375-008:2009 BS EN 3375-008:2009. Aerospace series. Cable, electrical, for digital data transmission. Single braid. Star Quad 100 Ohms. Type KD. Product standard
BS EN 3475-417:2009 BS EN 3475-417:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Fire resistance of cables confined inside a harness
BS EN 3660-019:2009 BS EN 3660-019:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 45°, unsealed, with cable tie strain relief. Product standard
BS EN 10208-1:2009 BS EN 10208-1:2009. Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
09/30183074 DC 09/30183074 DC. BS ISO 24415-2. Tips for assistive products for walking. Requirements and test methods. Part 2. Durability of tips for crutches
09/30183113 DC 09/30183113 DC. BS EN 81-7. Safety rules for the construction and installation of lifts. Part 7. Rack and pinion lifts
09/30183147 DC 09/30183147 DC. BS EN 60404-3 AMD2. Magnetic materials. Part 3. Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
09/30183416 DC 09/30183416 DC. BS ISO 21215. Intelligent transport systems. Communications access for land mobiles (CALM). CALM M5
09/30183435 DC 09/30183435 DC. BS EN ISO 1133-1. Plastics. Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials. Part 1. Standard method
09/30183439 DC 09/30183439 DC. BS EN ISO 1133-2. Plastics. Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials. Part 2. Method for materials sensitive to time-temperature history and/or moisture
PD CEN/TR 15367-3:2009 PD CEN/TR 15367-3:2009. Petroleum products. Guide for good housekeeping. Prevention of cross contamination
09/30183454 DC 09/30183454 DC. BS EN 1870-14 AMD1. Safety of woodworking machines. Circular sawing machines. Part 14. Vertical panel sawing machines
09/30183765 DC 09/30183765 DC. BS EN 60695-6-1 AMD1. Fire hazard testing. Part-6-1. Smoke obscuration. General guidance
BS EN ISO 2860:2008 BS EN ISO 2860:2008. Earth-moving machinery. Minimum access dimensions
BS EN ISO 3164:2008 BS EN ISO 3164:2008. Earth-moving machinery. Laboratory evaluations of protective structures. Specifications for deflection-limiting volume
BS EN ISO 3457:2008 BS EN ISO 3457:2008. Earth-moving machinery. Guards. Definitions and requirements
BS EN ISO 3457:2008 BS EN ISO 3457:2008. Earth-moving machinery. Guards. Definitions and requirements
BS EN ISO 6682:2008 BS EN ISO 6682:2008. Earth-moving machinery. Zones of comfort and reach for controls
BS EN ISO 7096:2008 BS EN ISO 7096:2008. Earth-moving machinery. Laboratory evaluation of operator seat vibration
BS EN ISO 3449:2008 BS EN ISO 3449:2008. Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
BS EN ISO 3450:2008 BS EN ISO 3450:2008. Earth-moving machinery. Braking systems of rubber-tyred machines. Systems and performance requirements and test procedures
BS EN ISO 6683:2008 BS EN ISO 6683:2008. Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests
BS EN ISO 6683:2008 BS EN ISO 6683:2008. Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests
BS EN ISO 4611:2008 BS EN ISO 4611:2008. Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
09/30184056 DC 09/30184056 DC. BS ISO 10845-1. Construction procurement. Part 1. Processes, methods and procedures
09/30184131 DC 09/30184131 DC. BS ISO 29081. Surface chemical analysis. Auger electron spectroscopy. Reporting of methods used for charge control and charge correction
09/30184235 DC 09/30184235 DC. BS ISO 10210. Plastics. Preparation of samples for biodegradation testing
BS EN ISO 1736:2008 BS EN ISO 1736:2008. Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 8381:2008 BS EN ISO 8381:2008. Milk-based infant foods. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 8381:2008 BS EN ISO 8381:2008. Milk-based infant foods. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 2450:2008 BS EN ISO 2450:2008. Cream. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 7328:2008 BS EN ISO 7328:2008. Milk-based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1737:2008 BS EN ISO 1737:2008. Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1737:2008 BS EN ISO 1737:2008. Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 7208:2008 BS EN ISO 7208:2008. Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 7208:2008 BS EN ISO 7208:2008. Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1854:2008 BS EN ISO 1854:2008. Whey cheese. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1854:2008 BS EN ISO 1854:2008. Whey cheese. Determination of fat content. Gravimetric method (Reference method)
PD ISO/IEC TR 15504-7:2008 PD ISO/IEC TR 15504-7:2008. Information technology. Process assessment. Assessment of organizational maturity
09/30184483 DC 09/30184483 DC. BS EN 54-3. Fire detection and fire alarm systems. Part 3. Fire alarm devices. Sounders
09/30184534 DC 09/30184534 DC. BS ISO/IEC 20000-1. Information technology. Service management. Part 1. Service management system requirements
BS EN 1463-1:2009 BS EN 1463-1:2009. Road marking materials. Retroreflecting road studs. Initial performance requirements
DD CEN/TS 15436-3:2009 DD CEN/TS 15436-3:2009. Road service area maintenance equipment. Classification
BS EN 50164-5:2009 BS EN 50164-5:2009. Lightning protection components (LPC). Requirements for earth electrode inspection housings and earth electrode seals
BS EN ISO 15088:2008 BS EN ISO 15088:2008. Water quality. Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio)
BS EN ISO 10472-4:2008 BS EN ISO 10472-4:2008. Safety requirements for industrial laundry machinery. Air dryers
ISO/IEC9834-9 : 2008 ED1 ISO/IEC9834-9 : 2008 ED1. Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authorities. Part 9: Registration of object identifier arcs for applications and services using tag-based identification
ISO/IEC24771 : 2009 EDTN1 ISO/IEC24771 : 2009 EDTN1. ISO/IEC24771 : 2009 Information technology - Telecommunications and information exchange between systems - MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment
ISO/IEC24767-2 : 2009 ED1 ISO/IEC24767-2 : 2009 ED1. Information technology. Home network security . Part 2: Internal security services. Secure communication protocol for middleware (SCPM)
BS ISO 12189:2008 BS ISO 12189:2008. Implants for surgery. Mechanical testing of implantable spinal devices. Fatigue test method for spinal implant assemblies using an anterior support
09/30185062 DC 09/30185062 DC. BS EN 12966-1 AMD1. Road vertical signs. Variable message traffic signs. Part 1. Product standard
BS EN 62002-2:2008 BS EN 62002-2:2008. Mobile and portable DVB-T/H radio access. Interface conformance testing
ISO/IEC22535 : 2009 EDTN3 ISO/IEC22535 : 2009 EDTN3. Information technology - Telecommunications and information exchange between systems - Corporate telecommunication networks - Tunnelling of QSIG over SIP
ISO/IEC/TR12861 : 2009 EDTN1 ISO/IEC/TR12861 : 2009 EDTN1. Information technology - Telecommunications and information exchange between systems - Next Generation Corporate Networks (NGCN) - Identification and routing
ISO/IEC/TR12860 : 2009 EDTN1 ISO/IEC/TR12860 : 2009 EDTN1. Information technology - Telecommunications and information exchange between systems - Next Generation Corporate Networks (NGCN) - General
ISO/IEC14165-521 : 2009 ED1 ISO/IEC14165-521 : 2009 ED1. Information technology. Fibre channel. Part 521: Fabric application interface standard (FAIS)
BS EN 14419:2009 BS EN 14419:2009. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
09/30185830 DC 09/30185830 DC. BS EN 15887. Building hardware. Uncontrolled Door Closing Devices for single action doors. Requirements and test methods
09/30185888 DC 09/30185888 DC. BS EN 13411-8. Terminations for steel wire ropes. Safety. Part 8. Swage terminals and swaging
09/30185897 DC 09/30185897 DC. BS EN 1341. Slabs of natural stone for external paving. Requirements and test methods
09/30185900 DC 09/30185900 DC. BS EN 1343. Kerbs of natural stone for external paving. Requirements and test methods
09/30185903 DC 09/30185903 DC. BS EN 14232. Advanced technical ceramics. Terms, definitions and abbreviations
09/30185912 DC 09/30185912 DC. BS EN 843-6. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Part 6. Guidance for fractographic investigation
09/30185951 DC 09/30185951 DC. BS EN 15889. Fire-fighting hoses. Test methods
09/30185965 DC 09/30185965 DC. BS EN 14566 AMD1. Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods
09/30185968 DC 09/30185968 DC. BS EN 15283-1 AMD1. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Part 1. Gypsum boards with mat reinforcement
09/30185971 DC 09/30185971 DC. BS EN 15283-2 AMD1. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Part 2. Gypsum fibre boards
09/30185974 DC 09/30185974 DC. BS EN 520 AMD1. Gypsum plasterboards. Definitions, requirements and test methods
09/30186154 DC 09/30186154 DC. BS ISO 11323. Iron ore and direct-reduced iron. Vocabulary
PD IEC/TR 62002-3:2008 PD IEC/TR 62002-3:2008. Mobile and portable DVB-T/H radio access. Measurement interface
09/30186180 DC 09/30186180 DC. BS EN 61760-3. Surface mounting technology. Part 3. Standard method for the specification of components for through hole reflow (THR) soldering
DD CEN/TS 15866:2009 DD CEN/TS 15866:2009. Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres
DD CEN/TS 15867:2009 DD CEN/TS 15867:2009. Advanced technical ceramics. Ceramic composites. Guide to the determination of the degree of misalignment in uniaxial mechanical tests
09/30186448 DC 09/30186448 DC. BS EN 13941. Design and installation of preinsulated bonded pipe systems for district heating
DD ISO/TS 22304:2008 DD ISO/TS 22304:2008. Tobacco. Determination of tobacco specific nitrosamines. Method using alkaline dichloromethane extraction
09/30186600 DC 09/30186600 DC. BS EN 13381-1. Test methods for determining the contribution to the fire resistance of structural members. Part 1. Horizontal protective membranes
09/30186636 DC 09/30186636 DC. BS EN ISO 9241-210. Ergonomics of human-system interaction. Part 210. Human-centred design for interactive systems
PD ISO/TR 26762:2008 PD ISO/TR 26762:2008. Natural gas. Upstream area. Allocation of gas and condensate
09/30186728 DC 09/30186728 DC. BS EN 62040-3. Uninterruptible power systems (UPS). Part 3. Method of specifying the performance and test requirements
09/30186768 DC 09/30186768 DC. BS ISO 6462. Face and shoulder milling cutters with indexable inserts. Dimensions
09/30186912 DC 09/30186912 DC. BS EN 14908-6. Open data communication in building automation, controls and building management. Control network protocol. Part 6. Application elements
09/30186950 DC 09/30186950 DC. BS EN 1782 AMD1. Tracheal tubes and connectors
09/30186956 DC 09/30186956 DC. BS EN 12342 AMD1. Breathing tubes intended for use with anaesthetic apparatus and ventilators
09/30187082 DC 09/30187082 DC. BS EN 60958-3 AMD1. Digital audio interface. Part 3. Consumer application
BS EN 12848:2009, BS 2000-486:2009 BS EN 12848:2009, BS 2000-486:2009. Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions
BS EN 12850:2009, BS 2000-488:2009 BS EN 12850:2009, BS 2000-488:2009. Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions
09/30187320 DC 09/30187320 DC. BS ISO 12759. Fans. Efficiency classification for fans
DD IEC/PAS 62137-3:2009 DD IEC/PAS 62137-3:2009. Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints
09/30187529 DC 09/30187529 DC. BS EN 14492-1 AMD1. Cranes. Power driven winches and hoists. Part 1. Power driven winches
09/30187532 DC 09/30187532 DC. BS EN 14492-2 AMD1. Cranes. Power driven winches and hoists. Part 2. Power driven hoists
09/30187605 DC 09/30187605 DC. BS ISO/IEC 14496-20 AMD2. Information technology. Coding of audio-visual objects. Part 20. Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF)
09/30187607 DC 09/30187607 DC. BS ISO/IEC 23000-9 AMD1. Information technology. Multimedia application format (MPEGA). Part 9. Digital Multimedia Broadcasting application format
09/30187627 DC 09/30187627 DC. BS ISO 12573. Aircraft. Tubing tolerances. Inch series
09/30187712 DC 09/30187712 DC. BS EN 81-1 AMD3. Safety rules for the construction and installation of lifts. Part 1. Electric lifts
09/30187715 DC 09/30187715 DC. BS EN 81-2 AMD3. Safety rules for the construction and installation of lifts. Part 2. Hydraulic lifts
09/30187726 DC 09/30187726 DC. BS EN 1870-17 AMD2. Safety of woodworking machines. Circular sawing machines. Part 17. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)
PD ISO/IEC TR 15504-6:2008 PD ISO/IEC TR 15504-6:2008. Information technology. Process assessment. An exemplar system life cycle process assessment model
DD IEC/PAS 60704-2-15:2008 DD IEC/PAS 60704-2-15:2008. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for household food waste disposers
09/30187984 DC 09/30187984 DC. BS EN ISO 10808. Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing. Complementary element
09/30188288 DC 09/30188288 DC. BS ISO 21828. Guidance on standards available for preparation and testing of unshaped refractory products
09/30188434 DC 09/30188434 DC. BS EN 598 AMD1. Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
PD CLC/TR 50083-10-1:2009 PD CLC/TR 50083-10-1:2009. Cable networks for television signals, sound signals and interactive services. Guidelines for the implementation of return paths in cable networks
09/30188666 DC 09/30188666 DC. BS 4607-5 AMD3. Non-metallic conduits and fittings for electrical installations. Part 5. Specification for rigid conduits, fittings and components of insulating material
BS ISO 14726:2008 BS ISO 14726:2008. Ships and marine technology. Identification colours for the content of piping systems
09/30188761 DC 09/30188761 DC. BS ISO/IEC 29143. Information technology. Automatic identification and data capture techniques. Air interface specification for Mobile RFID interrogators
09/30189092 DC 09/30189092 DC. BS EN 60297-3-106. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 3-106. Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
09/30189100 DC 09/30189100 DC. BS EN 60917-2-4. Modular order for the development of mechanical structures for electronic equipment practices. Part 2-4. Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in)
DD IEC/PAS 62601:2009 DD IEC/PAS 62601:2009. Industrial communication networks. Fieldbus Specifications. WIA-PA communication network and communication profile
09/30189153 DC 09/30189153 DC. BS ISO/IEC 14496-5 AMD15. Information technology. Coding of audio-visual objects. Part 5. Reference software
09/30189522 DC 09/30189522 DC. BS ISO 17331 AMD1. Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
09/30189572 DC 09/30189572 DC. BS EN 12864 AMD3. Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
09/30189744 DC 09/30189744 DC. BS ISO/IEC 24791-5. Information technology. Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 5. Device interface
09/30189756 DC 09/30189756 DC. BS ISO/IEC 18000-3. Information technology. Radio frequency identification for item management. Part 3. Parameters for air interface communications at 13,56 MHz
09/30189791 DC 09/30189791 DC. BS EN 61300-3-44. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-44. Examinations and measurements. Fibre optic receptacle connector endface visual and automated inspection
09/30189796 DC 09/30189796 DC. BS EN 61300-3-45. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-45. Examinations and measurements. Attenuation of random mated multi-fibre connectors
09/30189968 DC 09/30189968 DC. BS EN 13544-1 AMD1. Respiratory therapy equipment. Part 1. Nebulizing systems and their components
09/30189977 DC 09/30189977 DC. BS EN 13480-3 AMD4. Metallic industrial piping. Part 3. Design and calculation
BS EN 50216-11:2008 BS EN 50216-11:2008. Power transformer and reactor fittings. Oil and winding temperature indicators
BS EN 50216-11:2008 BS EN 50216-11:2008. Power transformer and reactor fittings. Oil and winding temperature indicators
09/30190333 DC 09/30190333 DC. BS EN 61400-24. Wind turbines. Part 24. Lightning protection
09/30190356 DC 09/30190356 DC. BS EN 60749-40. Semiconductor devices. Mechanical and climatic test methods. Part 40. Board level drop test method using a strain gauge
09/30190385 DC 09/30190385 DC. BS ISO 15765-4. Road vehicles. Diagnostics on Controller Area Networks (CAN). Part 4. Requirements for emissions-related systems
09/30190431 DC 09/30190431 DC. BS EN 61190-1-3 AMD1. Attachment materials for electronic assembly. Part 1-3. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications
PD CEN/TR 15858:2009 PD CEN/TR 15858:2009. Construction products. Assessment of the release of regulated dangerous substances from construction products based on the WT, WFT/FT procedures
09/30190478 DC 09/30190478 DC. BS EN 1147. Portable ladders for fire service use
09/30190483 DC 09/30190483 DC. BS EN 15767-3. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Part 3. Foam devices
09/30190527 DC 09/30190527 DC. BS ISO 26162. Systems to manage terminology, knowledge and content. Design, implementation and maintenance of terminology management systems
PD ISO/TR 1281-1:2008 PD ISO/TR 1281-1:2008. Rolling bearings. Explanatory notes on ISO 281. Basic dynamic load rating and basic rating life
PD ISO/TR 11044:2008 PD ISO/TR 11044:2008. Water quality. Scientific and technical aspects of batch algae growth inhibition tests
DD ISO/TS 16952-10:2008 DD ISO/TS 16952-10:2008. Technical product documentation. Reference designation system. Power plants
BS ISO 7919-3:2009 BS ISO 7919-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Coupled industrial machines
BS ISO 10816-3:2009 BS ISO 10816-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
BS ISO 15836:2009 BS ISO 15836:2009. Information and documentation. The Dublin Core metadata element set
DD ISO/TS 13399-100:2008 DD ISO/TS 13399-100:2008. Cutting tool data representation and exchange. Definitions, principles and methods for reference dictionaries
DD ISO/TS 25237:2008 DD ISO/TS 25237:2008. Health informatics. Pseudonymization
DD ISO/TS 25237:2008 DD ISO/TS 25237:2008. Health informatics. Pseudonymization
ISO11014 : 2009 EDTN1 ISO11014 : 2009 EDTN1. ISO11014 : 2009 Safety data sheet for chemical products - Content and order of sections
DD ISO/TS 13399-150:2008 DD ISO/TS 13399-150:2008. Cutting tool data representation and exchange. Usage guidelines
09/30190878 DC 09/30190878 DC. BS 1134-1. Assessment of surface texture. Part 1. Methods and instrumentation. Specification
09/30190926 DC 09/30190926 DC. BS ISO 29042-7. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 7. Test bench method for the measurement of the pollutant concentration parameter
09/30190929 DC 09/30190929 DC. BS ISO 29042-5. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 5. Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
09/30190932 DC 09/30190932 DC. BS ISO 29042-6. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 6. Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
09/30190935 DC 09/30190935 DC. BS ISO 10872. Water quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)
09/30190938 DC 09/30190938 DC. BS ISO 7919-4. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Part 4. Gas turbine sets with fluid-film bearings
09/30190941 DC 09/30190941 DC. BS ISO 10816-4. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 4. Gas turbine sets with fluid-film bearings
09/30190947 DC 09/30190947 DC. BS EN 60974-13. Arc welding equipment. Part 13. Return current clamp
09/30191126 DC 09/30191126 DC. BS EN 62132-8. Integrated circuits. Measurement of electromagnetic immunity. Part 8. Measurement of radiated immunity. IC Stripline method
09/30191130 DC 09/30191130 DC. BS EN 61967-8. Integrated circuits. Measurement of electromagnetic emissions. Part 8. Measurement of radiated emissions. IC Stripline method
PD ISO/TR 12885:2008 PD ISO/TR 12885:2008. Nanotechnologies. Health and safety practices in occupational settings relevant to nanotechnologies
09/30191208 DC 09/30191208 DC. BS 1134-2. Assessment of surface texture. Part 2. Guidance and general information
PD 5500:2009 PD 5500:2009. Specification for unfired fusion welded pressure vessels
09/30191222 DC 09/30191222 DC. BS 8902. Responsible sourcing sector certification schemes for construction products. Specification
09/30191398 DC 09/30191398 DC. BS EN 61169-18. Radio-frequency connectors. Part 18. Sectional specification. Radio frequency coaxial connectors of type SSMA
09/30191414 DC 09/30191414 DC. BS EN 61169-19. Radio-frequency connectors. Part 19. Sectional specification. Radio frequency coaxial connectors of type SSMB
09/30191428 DC 09/30191428 DC. BS EN 61169-41. Radio-frequency connectors. Part 41. Sectional specification for CQA series quick lock R.F. coaxial connectors
09/30191459 DC 09/30191459 DC. BS ISO 16063-41. Methods for the calibration of vibration and shock transducers. Part 41. Calibration of laser vibrometers
09/30191612 DC 09/30191612 DC. BS ISO 16992. Passenger car tyres. Spare unit substitutive equipment (SUSE)
09/30191615 DC 09/30191615 DC. BS ISO 4000-1. Passenger car tyres and rims. Part 1. Tyres (metric series)
09/30191644 DC 09/30191644 DC. BS ISO 8820-4. Road vehicles. Fuse-links. Part 4. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
09/30191895 DC 09/30191895 DC. BS ISO 10810. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 16814:2008 BS ISO 16814:2008. Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy
09/30191937 DC 09/30191937 DC. BS ISO 20152-1. Timber structures. Bond performance of adhesives. Part 1. Basic requirements
ISO/TS22745-11 : 2009 (CDROM) HEADER ED1 ISO/TS22745-11 : 2009 (CDROM) HEADER ED1. ISO/TS 22745-11 Industrial automation systems and integration - Open technical dictionaries and their application to master data . Part 11: Guidelines for the formulation of terminology
ISO/TS22745-13 : 2009 (CDROM) HEADER ED1 ISO/TS22745-13 : 2009 (CDROM) HEADER ED1. ISO/TS 22745-13 Industrial automation systems and integration - Open technical dictionaries and their application to master data . Part 13: Identification of concepts and terminology
09/30191982 DC 09/30191982 DC. BS ISO 21748. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
09/30192012 DC 09/30192012 DC. BS ISO 22390-1. Timber structures. Laminated veneer lumber (LVL). Part 1. Structural properties
09/30192027 DC 09/30192027 DC. BS EN 299. Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
09/30192039 DC 09/30192039 DC. BS EN 794-3 AMD2. Lung ventilators. Part 3. Particular requirements for emergency and transport ventilators
09/30192042 DC 09/30192042 DC. BS EN 13544-2 AMD1. Respiratory therapy equipment. Part 2. Tubing and connectors
09/30192045 DC 09/30192045 DC. BS EN 13544-3 AMD1. Respiratory therapy equipment. Part 3. Air entrainment devices
09/30192082 DC 09/30192082 DC. BS ISO/IEC 29160. Information technology. Radio frequency identification for item management. RFID emblem
09/30192126 DC 09/30192126 DC. BS ISO/IEC 15444-3 AMD1. Information technology. Part 3. JPEG 2000 image coding system. Motion JPEG 2000
09/30192128 DC 09/30192128 DC. BS ISO/IEC 15444-9 AMD4. Information technology. Part 9. JPEG 2000 image coding system. Interactivity tools, APIs and protocols
09/30192130 DC 09/30192130 DC. BS ISO/IEC 13818-1 AMD4. Information technology. Part 1. Generic coding of moving pictures and audio. Systems
09/30192137 DC 09/30192137 DC. BS ISO/IEC 14496-4 AMD37. Information technology. Coding of audio-visual objects. Part 4. Conformance testing
09/30192141 DC 09/30192141 DC. BS ISO/IEC 14496-5 AMD25. Information technology. Coding of audio-visual objects. Part 5. Reference software
09/30192146 DC 09/30192146 DC. BS ISO/IEC 14496-15 AMD3. Information technology. Coding of audio-visual objects. Part 15. Advanced Video Coding (AVC) file format
09/30192178 DC 09/30192178 DC. BS ISO/IEC 10373-6 AMD7. Identification cards. Test methods. Part 6. Proximity cards
BS EN ISO 15536-1:2008 BS EN ISO 15536-1:2008. Ergonomics. Computer manikins and body templates. General requirements
BS EN ISO 13732-1:2008 BS EN ISO 13732-1:2008. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Hot surfaces
BS EN ISO 13732-3:2008 BS EN ISO 13732-3:2008. Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Cold surfaces
BS EN ISO 14738:2008 BS EN ISO 14738:2008. Safety of machinery. Anthropometric requirements for the design of workstations at machinery. Anthropometric requirements for the design of workstations at machinery
09/30192332 DC 09/30192332 DC. BS EN 31. Wash basins. Connecting dimensions
09/30192335 DC 09/30192335 DC. BS EN 33. WC pans and WC suites. Connecting dimensions
09/30192341 DC 09/30192341 DC. BS EN 1060-2 AMD1. Non-invasive sphygmomanometers. Part 2. Supplementary requirements for mechanical sphygmomanometers
09/30192344 DC 09/30192344 DC. BS EN 1060-3 AMD2. Non-invasive sphygmomanometers. Part 3. Supplementary requirements for electro-mechanical blood pressure measuring systems
09/30192350 DC 09/30192350 DC. BS EN 12470-2 AMD1. Clinical thermometers. Part 2. Phase change type (dot matrix) thermometers
09/30192353 DC 09/30192353 DC. BS EN 12470-3 AMD1. Clinical thermometers. Part 3. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
09/30192356 DC 09/30192356 DC. BS EN 12470-4 AMD1. Clinical thermometers. Part 4. Performance of electrical thermometers for continuous measurement
09/30192362 DC 09/30192362 DC. BS EN 15892. Railway applications. Noise emission. Measurement of noise inside driver's cabs
DD ISO/TS 15869:2009 DD ISO/TS 15869:2009. Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks
09/30192396 DC 09/30192396 DC. BS ISO 18280. Plastics. Epoxy resins. Test methods
09/30192408 DC 09/30192408 DC. BS ISO 16014-1. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General principles
09/30192411 DC 09/30192411 DC. BS ISO 16014-2. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 2. Universal calibration method
09/30192414 DC 09/30192414 DC. BS ISO 16014-3. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperature method
09/30192417 DC 09/30192417 DC. BS ISO 16014-4. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
09/30192433 DC 09/30192433 DC. BS ISO 21581. Timber structures. Static and cyclic lateral load test method for shear walls
09/30192442 DC 09/30192442 DC. BS ISO 17491-1. Protective clothing. Test methods for clothing providing protection against chemicals. Part 1. Determination of resistance to outward leakage of gases (internal pressure test)
09/30192467 DC 09/30192467 DC. BS EN ISO 19142. Geographic information. Web Feature Service
09/30192470 DC 09/30192470 DC. BS ISO 19143. Geographic information. Filter encoding
BS EN ISO 17510-2:2009 BS EN ISO 17510-2:2009. Sleep apnoea breathing therapy. Masks and application accessories
BS EN ISO 17510-1:2009 BS EN ISO 17510-1:2009. Sleep apnoea breathing therapy. Sleep apnoea breathing therapy equipment
BS EN ISO 23747:2009 BS EN ISO 23747:2009. Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
09/30192596 DC 09/30192596 DC. BS 4500. Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
09/30192598 DC 09/30192598 DC. BS 1916-1. Limits and fits for engineering. Part 1. Limits and tolerances
09/30192611 DC 09/30192611 DC. BS 1916-2. Limits and fits for engineering. Part 2. Guide to the selection of fits in BS 1916-1
09/30192613 DC 09/30192613 DC. BS 1916-3. Limits and fits for engineering. Part 3. Recommendations for tolerances, limits and fits for large diameters (guidance)
09/30192729 DC 09/30192729 DC. BS EN 15643-2. Sustainability of construction works. Assessment of buildings. Part 2. Framework for the assessment of environmental performance
09/30192733 DC 09/30192733 DC. BS EN 15643-1. Sustainability of construction works. Assessment of buildings. Part 1. General framework
09/30192761 DC 09/30192761 DC. BS EN 115-2. Safety of escalators and moving walks. Part 2. Rules for the improvement of safety of existing escalators and moving walks
09/30192797 DC 09/30192797 DC. BS ISO 27875. Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
09/30192800 DC 09/30192800 DC. BS ISO 29262. Production equipment for microsystems. Interface between endeffector and handling system
09/30192807 DC 09/30192807 DC. BS ISO 7919-2. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Part 2. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
09/30192810 DC 09/30192810 DC. BS ISO 10816-2. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 2. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
BS ISO 3767-2:2008 BS ISO 3767-2:2008. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for agricultural tractors and machinery
ISO8536-7 : 2009 EDTN3 ISO8536-7 : 2009 EDTN3. ISO 8536-7 Infusion equipment for medical use. Part 7: Caps made of aluminium-plastics combinations for infusion bottles
09/30192939 DC 09/30192939 DC. BS EN 60811-100. Electric and optical fibre cables. Test methods for non-metallic materials. Part 100. General
09/30192943 DC 09/30192943 DC. BS EN 60811-201. Electric and optical fibre cables. Test methods for non-metallic materials. Part 201. General tests. Measurement of insulation thickness
09/30192947 DC 09/30192947 DC. BS EN 60811-202. Electric and optical fibre cables. Test methods for non-metallic materials. Part 202. General tests. Measurement of thickness of non-metallic sheath
09/30192954 DC 09/30192954 DC. BS EN 60811-203. Electric and optical fibre cables. Test methods for non-metallic materials. Part 203. General tests. Measurement of overall dimensions
09/30192958 DC 09/30192958 DC. BS EN 60811-301. Electric and optical fibre cables. Test methods for non-metallic materials. Part 301. Electrical tests. Measurement of the permittivity at 23°C of filling compounds
09/30192962 DC 09/30192962 DC. BS EN 60811-302. Electric and optical fibre cables. Test methods for non-metallic materials. Part 302. Electrical tests. Measurement of the D.C. resistivity at 23°C and 100°C of filling compounds
09/30192966 DC 09/30192966 DC. BS EN 60811-401. Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Environmental tests. Thermal ageing methods. Ageing in an air oven
09/30192970 DC 09/30192970 DC. BS EN 60811-402. Electric and optical fibre cables. Test methods for non-metallic materials. Part 402. Environmental tests. Water absorption tests
09/30192974 DC 09/30192974 DC. BS EN 60811-403. Electric and optical fibre cables. Test methods for non-metallic materials. Part 403. Environmental tests. Ozone resistance test on elastomeric compounds
09/30192978 DC 09/30192978 DC. BS EN 60811-404. Electric and optical fibre cables. Test methods for non-metallic materials. Part 404. Environmental tests. Mineral oil immersion tests for sheaths made with elastomeric compounds
09/30192982 DC 09/30192982 DC. BS EN 60811-405. Electric and optical fibre cables. Test methods for non-metallic materials. Part 405. Environmental tests. Thermal stability test for PVC insulations and PVC sheaths
09/30192986 DC 09/30192986 DC. BS EN 60811-406. Electric and optical fibre cables. Test methods for non-metallic materials. Part 406. Environmental tests. Resistance to environmental stress cracking of polyethylene and polypropylene compounds
09/30192990 DC 09/30192990 DC. BS EN 60811-407. Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Environmental tests. Measurement of mass increase of polyethylene and polypropylene compounds
09/30192994 DC 09/30192994 DC. BS EN 60811-408. Electric and optical fibre cables. Test methods for non-metallic materials. Part 408. Environmental tests. Long term stability test of polyethylene and polypropylene compounds
09/30192998 DC 09/30192998 DC. BS EN 60811-409. Electric and optical fibre cables. Test methods for non-metallic materials. Part 409. Environmental tests. Loss of mass test for thermoplastic insulations and sheaths
09/30193002 DC 09/30193002 DC. BS EN 60811-410. Electric and optical fibre cables. Test methods for non-metallic materials. Part 410. Environmental tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
09/30193006 DC 09/30193006 DC. BS EN 60811-411. Electric and optical fibre cables. Test methods for non-metallic materials. Part 411. Environmental tests. Low temperature brittleness of filling compounds
09/30193010 DC 09/30193010 DC. BS EN 60811-412. Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Environmental tests. Thermal ageing methods. Ageing in an air bomb
09/30193015 DC 09/30193015 DC. BS EN 60811-501. Electric and optical fibre cables. Test methods for non-metallic materials. Part 501. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
09/30193019 DC 09/30193019 DC. BS EN 60811-502. Electric and optical fibre cables. Test methods for non-metallic materials. Part 502. Mechanical tests. Shrinkage test for insulations
09/30193023 DC 09/30193023 DC. BS EN 60811-503. Electric and optical fibre cables. Test methods for non-metallic materials. Part 503. Mechanical tests. Shrinkage test for sheaths
09/30193027 DC 09/30193027 DC. BS EN 60811-504. Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths
09/30193031 DC 09/30193031 DC. BS EN 60811-505. Electric and optical fibre cables. Test methods for non-metallic materials. Part 505. Mechanical tests. Elongation at low temperature for insulations and sheaths
09/30193035 DC 09/30193035 DC. BS EN 60811-506. Electric and optical fibre cables. Test methods for non-metallic materials. Part 506. Mechanical tests. Impact test at low temperature for insulations and sheaths
09/30193039 DC 09/30193039 DC. BS EN 60811-507. Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for cross-linked materials
09/30193047 DC 09/30193047 DC. BS EN 60811-508. Electric and optical fibre cables. Test methods for non-metallic materials. Part 508. Mechanical tests. Pressure test at high temperature for insulation and sheaths
09/30193051 DC 09/30193051 DC. BS EN 60811-509. Electric and optical fibre cables. Test methods for non-metallic materials. Part 509. Mechanical tests. Test for resistance of insulations and sheaths to cracking
09/30193055 DC 09/30193055 DC. BS EN 60811-510. Electric and optical fibre cables. Test methods for non-metallic materials. Part 510. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air
09/30193059 DC 09/30193059 DC. BS EN 60811-511. Electric and optical fibre cables. Test methods for non-metallic materials. Part 511. Mechanical tests. Measurement of the melt flow index of polyethylene and polypropylene compounds
09/30193063 DC 09/30193063 DC. BS EN 60811-512. Electric and optical fibre cables. Test methods for non-metallic materials. Part 512. Mechanical tests. Tensile strength and elongation at break after conditioning at elevated temperature. Methods specific to polyethylene and polypropylene compounds
09/30193067 DC 09/30193067 DC. BS EN 60811-513. Electric and optical fibre cables. Test methods for non-metallic materials. Part 513. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning
09/30193071 DC 09/30193071 DC. BS EN 60811-601. Electric and optical fibre cables. Test methods for non-metallic materials. Part 601. Physical tests. Measurement of the drop-point of filling compounds
09/30193075 DC 09/30193075 DC. BS EN 60811-602. Electric and optical fibre cables. Test methods for non-metallic materials. Part 602. Physical Tests. Separation of oil in filling compounds
09/30193079 DC 09/30193079 DC. BS EN 60811-603. Electric and optical fibre cables. Test methods for non-metallic materials. Part 603. Physical tests. Measurement of total acid number of filling compounds
09/30193083 DC 09/30193083 DC. BS EN 60811-604. Electric and optical fibre cables. Test methods for non-metallic materials. Part 604. Physical tests. Measurement of absence of corrosive components in filling compounds
09/30193087 DC 09/30193087 DC. BS EN 60811-605. Electric and optical fibre cables. Test methods for non-metallic materials. Part 605. Physical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds
09/30193091 DC 09/30193091 DC. BS EN 60811-606. Electric and optical fibre cables. Test methods for non-metallic materials. Part 606. Physical tests. Methods for determining the density
09/30193095 DC 09/30193095 DC. BS EN 60811-607. Electric and optical fibre cables. Test methods for non-metallic materials. Part 607. Physical test. Test for the assessment of carbon black dispersion in Polyethylene and Polypropylene
09/30193134 DC 09/30193134 DC. BS 8204-1 AMD1. Screeds, Bases and in-situ floorings. Part 1. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice
09/30193137 DC 09/30193137 DC. BS 8204-2 AMD1. Screeds, Bases and in-situ floorings. Part 2. Concrete wearing surfaces. Code of practice
09/30193139 DC 09/30193139 DC. BS 8204-3 AMD1. Screeds, Bases and in-situ floorings. Part 3. Polymer modified cementitious levelling screeds and wearing screeds. Code of practice
09/30193169 DC 09/30193169 DC. BS 2TA 38. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
09/30193171 DC 09/30193171 DC. BS 2TA 39. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
09/30193173 DC 09/30193173 DC. BS 2TA 40. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1205-1375 MPa. Limiting ruling section over 25 mm up to and including 75 mm
09/30193175 DC 09/30193175 DC. BS 2TA 41. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1205-1375 MPa. Limiting ruling section over 25 mm up to and including 75 mm
09/30193177 DC 09/30193177 DC. BS 2TA 42. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1205-1375 MPa. Limiting ruling section over 25 mm up to and including 75 mm
09/30193179 DC 09/30193179 DC. BS 2TA 45. Specification for bar and section for machining of titanium-aluminium- molybdenumtin-silicon alloy. Tensile strength 1100-1280 MPa. Limiting ruling section 25 mm
09/30193181 DC 09/30193181 DC. BS 2TA 46. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin -silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section over 25 mm up to and including 100 mm
09/30193183 DC 09/30193183 DC. BS 2TA 47. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section 100 mm
09/30193185 DC 09/30193185 DC. BS 2TA 48. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy. Tensile strength 1050-1200 MPa. Limiting ruling section 100 mm
09/30193187 DC 09/30193187 DC. BS 2TA 49. Specification for bar and section for machining of titanium-aluminium-molybdenumtin- silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
09/30193240 DC 09/30193240 DC. BS 3TA 1. Specification for sheet and strip of commercially pure titanium (Tensile strength 290 - 420 MPa)
09/30193242 DC 09/30193242 DC. BS 3TA 2. Specification for sheet and strip of commercially pure titanium (Tensile strength 390 - 540 MPa)
09/30193244 DC 09/30193244 DC. BS 3TA 6. Specification for sheet and strip of commercially pure titanium (Tensile strength 570 - 730 MPa)
09/30193246 DC 09/30193246 DC. BS 3TA 7. Specification for bar and section for machining of commercially pure titanium (Tensile strength 540 - 740 MPa)
09/30193248 DC 09/30193248 DC. BS 3TA 10. Specification for sheet of titanium-aluminium-vanadium alloy (Tensile strength 960 - 1270 MPa)
09/30193250 DC 09/30193250 DC. BS 3TA 11. Specification for bar and section for machining of titanium-aluminium-vanadium alloy (Tensile strength 900 - 1160 MPa) (Limiting ruling section 150 mm)
09/30193252 DC 09/30193252 DC. BS 3TA 12. Specification for forging stock of titanium- aluminium-vanadium alloy (Tensile strength 900 - 1160 MPa) (Limiting ruling section 150 mm)
09/30193254 DC 09/30193254 DC. BS 3TA 13. Specification for forgings of titanium- aluminium-vanadium alloy (Tensile strength 900 - 1160 MPa) (Limiting ruling section 150 mm)
09/30193256 DC 09/30193256 DC. BS 3TA 21. Specification for sheet and strip of titanium-copper alloy (Tensile strength 540 - 700 MPa)
09/30193258 DC 09/30193258 DC. BS 3TA 28. Specification for forging stock and wire of titanium-aluminium-vanadium alloy (Tensile strength 1100 - 1300 MPa) (Limiting ruling section 20 mm)
09/30193260 DC 09/30193260 DC. BS 3TA 100. Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys
09/30193290 DC 09/30193290 DC. BS EN 12183. Manual wheelchairs. Requirements and test methods
09/30193293 DC 09/30193293 DC. BS EN 12184. Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
09/30193296 DC 09/30193296 DC. BS EN 15518-1. Winter maintenance equipment. Road weather information systems. Part 1. Global definitions and components
09/30193299 DC 09/30193299 DC. BS EN 15518-2. Winter maintenance equipment. Road weather information systems. Part 2. Road weather. Recommended observation and forecast
09/30193302 DC 09/30193302 DC. BS EN 15518-3. Winter maintenance equipment. Road weather information systems. Part 3. Requirements on measured values of stationary equipments
09/30193305 DC 09/30193305 DC. BS EN 15907. Film identification. Enhancing interoperability of metadata. Element sets and structures
09/30193349 DC 09/30193349 DC. BS ISO 11476. Paper and board. Determination of CIE-whiteness, C/2° (indoor illumination conditions)
09/30193379 DC 09/30193379 DC. BS ISO 813. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method
09/30193382 DC 09/30193382 DC. BS ISO 4647. Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test
09/30193388 DC 09/30193388 DC. BS ISO 4666-1. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Part 1. Basic principles
09/30193535 DC 09/30193535 DC. BS 2TA 50. Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
09/30193537 DC 09/30193537 DC. BS 2TA 51. Forgings of titanium-aluminium-molybdenum- tin-silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
09/30193539 DC 09/30193539 DC. BS 2TA 52. Specification for sheet and strip of titanium-copper alloy. Tensile strength 690-920 MPa
09/30193541 DC 09/30193541 DC. BS 2TA 56. Specification for plate of titanium- aluminium-vanadium alloy. Tensile strength 895-1150 MPa. Maximum thickness 100 mm
09/30193543 DC 09/30193543 DC. BS 2TA 57. Specification for plate of titanium- aluminium-molybdenum-tin-silicon alloy. Tensile strength 1030-1220 MPa. Maximum thickness 65 mm
09/30193545 DC 09/30193545 DC. BS 2TA 58. Specification for plate of titanium-copper alloy. Tensile strength 520-640 MPa. Maximum thickness 10 mm
09/30193547 DC 09/30193547 DC. BS 2TA 59. Specification for sheet of titanium-aluminium-vanadium alloy. Tensile strength 920-1180 MPa
DD IEC/PAS 62587:2008 DD IEC/PAS 62587:2008. Method for measuring performance of portable household electric room air cleaners
BS EN 50342-3:2008 BS EN 50342-3:2008. Lead-acid starter batteries. Terminal system for batteries with 36 V nominal voltage
09/30193656 DC 09/30193656 DC. BS ISO 28564-1. Public information guidance systems. Part 1. Design principles and element requirements for location plans, maps and diagrams
09/30193659 DC 09/30193659 DC. BS ISO 11089. Rubber, raw synthetic. Determination of anti-degradants by high-performance liquid chromatography
09/30193685 DC 09/30193685 DC. BS ISO 4081. Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
09/30193698 DC 09/30193698 DC. BS EN 14080. Timber structures. Glued laminated timber and glued laminated solid timber. Requirements
09/30193701 DC 09/30193701 DC. BS EN 15898. Conservation of cultural property. Main general terms and definitions concerning conservation of cultural property
DD IEC/PAS 62593:2008 DD IEC/PAS 62593:2008. Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulators in wireless communication and broadcasting systems
BS ISO 16111:2008 BS ISO 16111:2008. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
09/30193867 DC 09/30193867 DC. BS EN ISO 16409 AMD1. Dentistry. Oral hygiene products. Manual interdental brushes
09/30193875 DC 09/30193875 DC. BS EN ISO 11953. Dentistry. The performance of hand torque instruments for the clinical tightening of screw-retained joints in endosseous dental implant systems
09/30193885 DC 09/30193885 DC. BS EN 861 AMD1. Safety of woodworking machines. Surface planing and thicknessing machines
ISO/IEC29121 : 2009 EDTN1 ISO/IEC29121 : 2009 EDTN1. ISO/IEC29121 : 2009 Information technology Digitally recorded media for information interchange and storage Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks
09/30194017 DC 09/30194017 DC. BS EN 480-10. Admixtures for concrete, mortar and grout. Test methods. Part 10. Determination of water soluble chloride content
09/30194024 DC 09/30194024 DC. BS EN 15912. Durability of reaction to fire performances. Classes of fire retardant treated wood-based product in interior and exterior end use applications
ISO/TS22745-1 : 2009 (CD-ROM) HEADER ED1 ISO/TS22745-1 : 2009 (CD-ROM) HEADER ED1. ISO/TS 22745-1 Industrial automation systems and integration - Open technical dictionaries and their application to master data. Part 1: Overview and fundamental principles
ISO/TS22745-20 : 2009 (CDROM) HEADER ED1 ISO/TS22745-20 : 2009 (CDROM) HEADER ED1. ISO/TS 22745-20 Industrial automation systems and integration - Open technical dictionaries and their application to master data . Part 20: Procedures for the maintenance of an open technical dictionary
09/30194058 DC 09/30194058 DC. BS ISO 27955. Road vehicles. Securing of cargo in passenger cars, station wagons and multi-purpose vehicles. Requirements and test methods
09/30194061 DC 09/30194061 DC. BS ISO 8721. Road vehicles. Measurement techniques in impact tests. Optical instrumentation
ISO/TS10891 : 2009 EDTN1 ISO/TS10891 : 2009 EDTN1. ISO/TS10891 : 2009 Freight containers - Radio frequency identification (RFID) - Licence plate tag
09/30194066 DC 09/30194066 DC. BS ISO 11839. Machinery for forestry. Glazing and panel materials used in operator enclosures for protection against thrown objects. Test method and performance criteria
PD ISO/TR 12148:2009 PD ISO/TR 12148:2009. Natural gas. Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
ISO/TS22745-2 : 2009 (CD-ROM) HEADER ED1 ISO/TS22745-2 : 2009 (CD-ROM) HEADER ED1. ISO/TS 22745-2 Industrial automation systems and integration - Open technical dictionaries and their application to master data . Part 2: Vocabulary
09/30194083 DC 09/30194083 DC. BS EN 15900. Energy efficiency services. Definitions and essential requirements
09/30194273 DC 09/30194273 DC. BS EN 62208. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS EN 2542:2008 BS EN 2542:2008. Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts
09/30194296 DC 09/30194296 DC. BS 8406. Event stewarding and crowd safety services. Code of practice
09/30194345 DC 09/30194345 DC. BS EN 61386-25. Conduit systems for cable management. Part 25. Particular requirements. Conduit fixing devices
09/30194359 DC 09/30194359 DC. BS EN 60034-18-34. Rotating electrical machines. Part 18-34. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems
09/30194526 DC 09/30194526 DC. BS EN 15331. Criteria for design, management and control of maintenance services for buildings
09/30194529 DC 09/30194529 DC. BS EN 15429-2. Sweepers. Part 2. Performance requirements and test methods
09/30194594 DC 09/30194594 DC. BS ISO 22394. Hardmetals. Knoop hardness test
09/30194902 DC 09/30194902 DC. BS EN 12697-47. Bituminous mixtures. Test methods for hot mix asphalt. Part 47. Determination of the ash content of lake asphalt
09/30194905 DC 09/30194905 DC. BS EN 15905. Fertilizers. Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC)
09/30194908 DC 09/30194908 DC. BS EN 15904. Glass packaging. Standard tolerances for flaconnage
09/30194911 DC 09/30194911 DC. BS EN 14634. Glass packaging. 26 H 180 crown finish. Dimensions
BIP 3083:2009 BIP 3083:2009. Graphical symbols for use in the labelling of medical devices CD-ROM
09/30194915 DC 09/30194915 DC. BS EN 14635. Glass packaging. 26 H 126 crown finish. Dimensions
09/30194918 DC 09/30194918 DC. BS EN 15906. Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity
09/30194936 DC 09/30194936 DC. BS EN ISO 28460. Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations
09/30194939 DC 09/30194939 DC. BS ISO 12640-4. Graphic technology. Prepress digital data exchange. Part 4. Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID]
09/30194943 DC 09/30194943 DC. BS EN ISO 225. Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions
09/30194969 DC 09/30194969 DC. BS ISO 11237. Rubber hoses and hose assemblies. Compact wire-braid reinforced hydraulic types for oil-based or water-based fluids. Specification
09/30194984 DC 09/30194984 DC. BS EN ISO 105-E01. Textiles. Tests for colour fastness. Part E01. Colour fastness to water
09/30194987 DC 09/30194987 DC. BS EN ISO 105-E07. Textiles. Tests for colour fastness. Part E07. Colour fastness to spotting by water
09/30194990 DC 09/30194990 DC. BS EN ISO 105-E09. Textiles. Tests for colour fastness. Part E09. Colour fastness to boiling water
09/30194996 DC 09/30194996 DC. BS EN ISO 105-E03. Textiles. Tests for colour fastness. Part E03. Colour fastness to chlorinated water (swimming-pool water)
09/30195206 DC 09/30195206 DC. BS EN 54-30. Fire detection and fire alarm systems. Part 30. Multi-sensor fire detectors. Point detectors using a combination of carbon monoxide and heat sensors
09/30195262 DC 09/30195262 DC. BS ISO 12439. Mixing water for concrete
09/30195265 DC 09/30195265 DC. BS ISO 11349. Water quality. Determination of lipophilic substances of low volatility. Gravimetric method
09/30195277 DC 09/30195277 DC. BS EN 13451-1. Swimming pool equipment. Part 1. General safety requirements and test methods
09/30195283 DC 09/30195283 DC. BS EN 15908. Anaesthetic and respiratory equipment. Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
09/30195292 DC 09/30195292 DC. BS EN 15909. Fertilizers. Determination of calcium and formate in calcium foliar fertilizers
BS EN ISO 11102-2:2009 BS EN ISO 11102-2:2009. Reciprocating internal combustion engines. Handle starting equipment. Method of testing the angle of disengagement
09/30195327 DC 09/30195327 DC. BS EN ISO 7396-1 AMD2. Medical gas pipeline systems. Part 1. Pipeline systems for compressed medical gases and vacuum
09/30195606 DC 09/30195606 DC. BS EN 12899-6. Fixed vertical road traffic signs. Part 6. Visual performance of retroreflective sheeting materials
09/30195609 DC 09/30195609 DC. BS EN 15890. Foodstuffs. Determination of patulin in fruit juice and fruit based puree for young children. HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
09/30195699 DC 09/30195699 DC. BS EN 15910. Water quality. Guidance on the estimation of fish abundance with mobile hydroacoustic methods
09/30195708 DC 09/30195708 DC. BS EN 13383-1. Armourstone. Part 1. Specification
09/30195711 DC 09/30195711 DC. BS EN 13383-2. Armourstone. Part 2. Test methods
09/30195726 DC 09/30195726 DC. BS ISO 7827. Water quality. Evaluation of the “ready”, “ultimate” aerobic biodegradability of organic compounds in an aqueous medium. Method by analysis of dissolved organic carbon (DOC)
09/30195729 DC 09/30195729 DC. BS ISO 8969. Timber structures. Testing of punched metal plate fasterners and joints
09/30195759 DC 09/30195759 DC. BS ISO 11704. Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method
09/30195765 DC 09/30195765 DC. BS ISO 8970. Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
09/30195786 DC 09/30195786 DC. BS ISO/IEC 19500-1. Information technology. Open distributed processing. Common Object Request Broker Architecture (CORBA) specification. Part 1. CORBA interfaces
09/30195789 DC 09/30195789 DC. BS ISO/IEC 19500-2. Information technology. Open distributed processing. Common Object Request Broker Architecture (CORBA) specification. Part 2. Interoperability
09/30195792 DC 09/30195792 DC. BS ISO/IEC 19500-3. Information technology. Open distributed processing. Common Object Request Broker Architecture (CORBA) specification. Part 3. Components
09/30195952 DC 09/30195952 DC. BS ISO 12567-1. Thermal performance of windows and doors. Determination of thermal transmittance by hot-box method. Part 1. Complete windows and doors
09/30195958 DC 09/30195958 DC. BS ISO 22389. Timber structures. Bending applications of I-beams. Structural testing, evaluation and characterization
09/30196055 DC 09/30196055 DC. BS 8901. Specification for a sustainability management system for events
09/30196057 DC 09/30196057 DC. BS ISO 15779. Condensed-aerosol fire-extinguishing systems. Physical properties and system design. General requirements
09/30196088 DC 09/30196088 DC. BS ISO 27608. Animal and vegetable fats and oils. Determination of Lovibond colour. Automatic method
09/30196098 DC 09/30196098 DC. BS EN 61003-2. Industrial-process control systems. Instruments with analogue inputs and two or multi-state outputs. Part 2. Guidance for inspection and routine testing
09/30196484 DC 09/30196484 DC. BS ISO 24614-1. Language resource management. Word segmentation of written texts for monolingual and multilingual information processing. Part 1. Basic concepts and general principles
09/30196499 DC 09/30196499 DC. BS ISO 26422. Petroleum and related products. Determination of shear stability of lubricating oils containing polymers. Method using a tapered roller bearing
09/30196632 DC 09/30196632 DC. BS EN 4325. Aerospace series. Steel FE-WM 3504 (X4CrNiMo16-5-1). Air melted. Filller metal for welding
09/30196635 DC 09/30196635 DC. BS EN 60092-510. Electrical installations in ships. Part 510. Special features. High Voltage Shore Connection Systems (HVSC-Systems)
09/30196724 DC 09/30196724 DC. BS ISO 18292. Energy performance of fenestration systems. Calculation procedure
09/30196753 DC 09/30196753 DC. BS ISO 10041-1. Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Part 1. Main characteristics to include in the supplier's literature
09/30196757 DC 09/30196757 DC. BS ISO 10041-2. Pneumatic fluid power. Electrically modulated pneumatic flow rate control valves. Part 2. Test methods to determinate main characteristics to include in the supplier's literature
09/30196766 DC 09/30196766 DC. BS ISO 23269-4. Ships and marine technology. Breathing apparatus for ships. Part 4. Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes
09/30196769 DC 09/30196769 DC. BS ISO 12030. Tobacco and tobacco products. Non-destructive detection of lamina density deviation in case. Ionizing radiation method
09/30196776 DC 09/30196776 DC. BS EN ISO 11161 AMD1. Safety of machinery. Integrated manufacturing systems. Basic requirements
09/30196780 DC 09/30196780 DC. BS ISO 12493. Rubber, vulcanized. Determination of stress in tension on heating
09/30196939 DC 09/30196939 DC. BS ISO 12315. Aluminium oxide primarily used for production of aluminium. Method for calculating the Al2 O3 content of smelter-grade alumina
ISO8124-1 : 2009 ED2 ISO8124-1 : 2009 ED2. ISO8124-1 : 2009 Safety of toys. Part 1: Safety aspects related to mechanical and physical properties
09/30197069 DC 09/30197069 DC. BS EN 488. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
09/30197121 DC 09/30197121 DC. BS EN 15928. Fertilizers. Determination of the fineness of grinding (dry procedure)
09/30197132 DC 09/30197132 DC. BS EN 15911. Foodstuffs. Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection
09/30197184 DC 09/30197184 DC. BS ISO 24615. Language resource management. Syntactic annotation framework (SynAF)
09/30197413 DC 09/30197413 DC. BS EN 50411-3-2. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 3-2. Singlemode mechanical fibre splice
09/30197559 DC 09/30197559 DC. BS EN 60794-3-11. Optical fibre cables. Part 3-11. Outdoor cables. Product specification for duct and directly buried single-mode optical fibre telecommunication cables
09/30197676 DC 09/30197676 DC. BS IEC 61810-2-1. Electromechanical elementary relays. Part 2-1. Reliability. Procedure for the verification of B10 values
09/30197751 DC 09/30197751 DC. BS EN 4678. Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments
BS EN ISO 17232:2009 BS EN ISO 17232:2009. Leather. Physical and mechanical tests. Determination of heat resistance of patent leather
BS EN ISO 22288:2009 BS EN ISO 22288:2009. Leather. Physical and mechanical tests. Determination of flex resistance by the vamp flex method
09/30197816 DC 09/30197816 DC. BS ISO 10816-1 AMD1. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 1. General guidelines
09/30197819 DC 09/30197819 DC. BS ISO 2631-1 AMD1. Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration. Part 1. General requirements
09/30197862 DC 09/30197862 DC. BS EN 62616. Maritime navigation and radiocommunication equipment and systems. Bridge navigational watch alarm system (BNWAS). Performance requirements, methods of testing and required test results
09/30197921 DC 09/30197921 DC. BS EN 62561-4. Requirements for Lightning Protection System Components (LPSC). Part 4. Requirements for fasteners
09/30197925 DC 09/30197925 DC. BS EN 4641-301. Aerospace series. Cables, optical 125μm diameter cladding. Part 301. Tight structure 50-125μm GI fibre nominal 1.8 mm Outside Diameter. Product Standard
09/30197984 DC 09/30197984 DC. BS EN 1807-2. Safety of woodworking machines. Band sawing machines. Part 2. Log sawing machines
09/30198043 DC 09/30198043 DC. BS EN 1127-1. Explosive atmospheres. Explosion prevention and protection. Part 1. Basic concepts and methodology
09/30198046 DC 09/30198046 DC. BS EN 15918. Cycles. Bicycle trailers. Safety requirements and test methods
09/30198049 DC 09/30198049 DC. BS EN 14774-1. Solid biofuels. Determination of moisture content. Oven dry method. Part 1. Total moisture. Reference method
09/30198052 DC 09/30198052 DC. BS EN 14774-2. Solid biofuels. Determination of moisture content. Oven dry method. Part 2. Total moisture. Simplified method
09/30198055 DC 09/30198055 DC. BS EN 14774-3. Solid biofuels. Determination of moisture content. Oven dry method. Part 3. Moisture in general analysis sample
09/30198058 DC 09/30198058 DC. BS EN 15148. Solid biofuels. Determination of the content of volatile matter
09/30198061 DC 09/30198061 DC. BS EN 14775. Solid biofuels. Determination of ash content
09/30198066 DC 09/30198066 DC. BS EN 15927. Services offered by hearing aid professionals
09/30198118 DC 09/30198118 DC. BS ISO 13260. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
09/30198121 DC 09/30198121 DC. BS ISO 13262. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
09/30198124 DC 09/30198124 DC. BS ISO 13263. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
09/30198127 DC 09/30198127 DC. BS ISO 13264. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
09/30198133 DC 09/30198133 DC. BS ISO 13266. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
09/30198136 DC 09/30198136 DC. BS ISO 13267. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test method for buckling resistance
09/30198139 DC 09/30198139 DC. BS EN 61400-1 AMD1. Wind turbines. Part 1. Design requirements
09/30198143 DC 09/30198143 DC. BS ISO 13268. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
09/30198190 DC 09/30198190 DC. BS ISO 13229. Thermoplastics piping systems for non-pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value
09/30198193 DC 09/30198193 DC. BS ISO 13254. Thermoplastics piping systems for non-pressure applications. Test method for watertightness
09/30198196 DC 09/30198196 DC. BS ISO 13255. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints
09/30198199 DC 09/30198199 DC. BS ISO 13257. Thermoplastics piping systems for non pressure applications. Test method for resistance to elevated temperature cycling
09/30198202 DC 09/30198202 DC. BS ISO 13259. Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
09/30198206 DC 09/30198206 DC. BS ISO 17736. Workplace air quality. Determination of isocyanate in air using a double-filter samplingdevice and analysis by high pressure liquid chromatography
09/30198228 DC 09/30198228 DC. BS EN 15891. Foodstuffs. Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and UV detection
09/30198231 DC 09/30198231 DC. BS EN 62561-7. Requirements for Lightning Protection System Components (LPSC). Part 7. Requirements for earthing enhancing compounds
09/30198252 DC 09/30198252 DC. BS EN 12470-1 AMD1. Clinical thermometers. Part 1. Metallic liquid-in-glass thermometers with maximum device
09/30198254 DC 09/30198254 DC. BS EN 60368-3. Piezoelectric filters of assessed quality. Part 3. Standard outlines and lead connections
09/30198258 DC 09/30198258 DC. BS EN 60679-3. Quartz crystal controlled oscillators of assessed quality. Part 3. Standard outlines and lead connections
09/30198263 DC 09/30198263 DC. BS EN 61837-1. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Part 1. Plastic moulded enclosure outlines
CWA 15914-1:2009 CWA 15914-1:2009. Criteria, methodology and procedures for creating an E-codification concerning substances used in pharmaceutical compounding
ISO/IEC23000-4 : 2009 EDTN2 ISO/IEC23000-4 : 2009 EDTN2. Information technology. Multimedia application format (MPEG-A). Part 4: Musical slide show application format
09/30198357 DC 09/30198357 DC. BS EN 13411-4. Terminations for steel wire ropes. Safety. Part 4. Metal resin socketing
09/30198396 DC 09/30198396 DC. BS EN 61784-2. Industrial communication networks. Profiles. Part 2. Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
09/30198404 DC 09/30198404 DC. BS EN 61784-1. Industrial communication networks. Profiles. Part 1. Fieldbus profiles
09/30198417 DC 09/30198417 DC. BS EN 60505. Evaluation and qualification of electrical insulation systems
09/30198606 DC 09/30198606 DC. BS EN 60332-3-10. Tests on electric and optical fibre cables under fire conditions. Part 3-10. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
09/30198609 DC 09/30198609 DC. BS EN 60332-3-21. Tests on electric cables under fire conditions. Part 3-21. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A F/R
09/30198613 DC 09/30198613 DC. BS EN 60332-3-22. Tests on electric and optical fibre cables under fire conditions. Part 3-22. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A
09/30198617 DC 09/30198617 DC. BS EN 60332-3-23. Tests on electric and optical fibre cables under fire conditions. Part 3-23. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category B
09/30198621 DC 09/30198621 DC. BS EN 60332-3-24. Tests on electric and optical fibre cables under fire conditions. Part 3-24. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category C
09/30198647 DC 09/30198647 DC. BS EN 60335-2-4 AMD. Household and similar electrical appliances. Safety. Part 2-4. Particular requirements for spin extractors
09/30198650 DC 09/30198650 DC. BS EN 62329-3-102. Heat shrinkable moulded shapes. Part 3. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 102. Heat-shinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
09/30198654 DC 09/30198654 DC. BS EN 60335-2-7 AMD. Household and similar electrical appliances. Safety. Part 2-7. Particular requirements for washing machines
09/30198664 DC 09/30198664 DC. BS ISO/IEC 15421. Information technology. Automatic identification and data capture techniques. Bar code master test specifications
09/30198671 DC 09/30198671 DC. BS EN 60332-3-25. Tests on electric and optical fibre cables under fire conditions. Part 3-25. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category D
09/30198686 DC 09/30198686 DC. BS EN 46-1. Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajalus (Linnaeus). Part 1. Application by surface treatment (Laboratory method)
09/30198689 DC 09/30198689 DC. BS EN 46-2. Wood preservatives. Determination of the preventive action agaist Hylotrupes bajulus (Linnaeus). Part 2. Ovicidal effect (laboratory method)
09/30198703 DC 09/30198703 DC. BS EN 15930. Fibres. Elasticity of fibres. Test methods
09/30198710 DC 09/30198710 DC. BS EN 1948-4. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Part 4. Sampling and analysis of dioxin-like PCBs
09/30198714 DC 09/30198714 DC. BS EN 14918. Solid biofuels. Determination of calorific value
09/30198718 DC 09/30198718 DC. BS EN 15103. Solid biofuels. Determination of bulk density
09/30198721 DC 09/30198721 DC. BS EN 15210-1. Solid biofuels. Determination of mechanical durability of pellets and briquettes. Part 1. Pellets
09/30198762 DC 09/30198762 DC. BS EN 1807-1. Safety of woodworking machines. Band sawing machines. Part 1. Table band saws and band re-saws
09/30198786 DC 09/30198786 DC. BS EN 6049-008. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Part 008. Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, Flexible post installation operating temperature from 55°C to 200°C. Product standard
ISO/IECTR14496-9 : 2009 EDTN3 ISO/IECTR14496-9 : 2009 EDTN3. Information technology. Coding of audio-visual objects. Part 9: Reference hardware description
09/30198861 DC 09/30198861 DC. BS EN ISO 11114-1. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 1. Metallic materials
09/30198888 DC 09/30198888 DC. BS EN ISO 1043-2. Plastics. Symbols and abbreviated terms. Part 2. Fillers and reinforcing materials
09/30198956 DC 09/30198956 DC. BS EN 2997-016. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65°C to 175°C continuous, 200°C continuous, 260°C peak. Part 016. Plug with integrated accessory. Product standard
09/30198997 DC 09/30198997 DC. BS EN 2997-015. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65°C to 175°C continuous, 200°C continuous, 260°C peak. Part 015. Jam-nut mounted receptacle with integrated accessory. Product standard
09/30199020 DC 09/30199020 DC. BS EN 2997-014. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65°C to 175°C continuous, 200°C continuous, 260°C peak. Part 014. Square flange receptacle with integrated accessory. Product standard
09/30199064 DC 09/30199064 DC. BS EN 62364. Hydraulic machines. Guide for dealing with abrasive erosion in water
09/30199080 DC 09/30199080 DC. BS EN 4023. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°
09/30199086 DC 09/30199086 DC. BS EN ISO 105-C08. Textiles. Tests for colour fastness. Part C08. Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
09/30199092 DC 09/30199092 DC. BS EN 4025. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°, bulkhead
09/30199116 DC 09/30199116 DC. BS EN 4184. Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°, welded ends, double
09/30199120 DC 09/30199120 DC. BS EN ISO 17072-1. Leather. Chemical determination of metal content. Part 1. Extractable metals
09/30199124 DC 09/30199124 DC. BS EN ISO 17072-2. Leather. Chemical determination of metal content. Part 2. Total metal content
DD IEC/PAS 62591:2009 DD IEC/PAS 62591:2009. Industrial communication networks. Fieldbus specifications. WirelessHART communication network and communication profile
09/30199215 DC 09/30199215 DC. BS EN 60793-1-31. Optical fibres. Part 1-31. Measurement methods and test procedures. Tensile strength
09/30199219 DC 09/30199219 DC. BS EN 60793-1-32. Optical fibres. Part 1-32. Measurement methods and test procedures. Coating strippability
09/30199223 DC 09/30199223 DC. BS EN 60876-1. Fibre optic interconnecting devices and passive components. Fibre optic spatial switches. Part 1. Generic specification
09/30199239 DC 09/30199239 DC. BS ISO/IEC 25045. Software engineering. Software product Quality Requirements and Evaluation (SQuaRE). Evaluation Module for Recoverability
09/30199295 DC 09/30199295 DC. BS ISO 18901. Imaging materials. Processed silver-gelatin type black-and white films. Specifications for stability
09/30199323 DC 09/30199323 DC. BS EN 15293. Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
09/30199338 DC 09/30199338 DC. BS EN 957-6. Stationary training equipment. Part 6. Treadmills, additional specific safety requirements and test methods
09/30199352 DC 09/30199352 DC. BS EN 14476 AMD2. Chemical disinfectants and antiseptics. Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine. Test method and requirements (phase 2, step 1)
09/30199358 DC 09/30199358 DC. BS EN 12697-46. Bituminous mixtures. Test methods for hot mix asphalt. Part 46. Low temperature cracking and properties by uniaxial tension tests
09/30199361 DC 09/30199361 DC. BS EN 12829. Surface active agents. Preparation of water with known calcium and magnesium hardness
09/30199364 DC 09/30199364 DC. BS EN 13463-5. Non-electrical equipment intended for use in potentially explosive atmospheres. Part 5. Protection by constructional safety 'c'
09/30199378 DC 09/30199378 DC. BS EN 60061. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 43. Part 2. Lampholders. Amendment 40. Part 3. Gauges. Amendment 41
09/30199395 DC 09/30199395 DC. BS EN 62253. Photovoltaic pumping systems. Design qualification and performance measurements
09/30199438 DC 09/30199438 DC. BS EN 60112 AMD1. Method for the determination of the proof and the comparative tracking indices of solid insulating materials
CWA 15929:2009 CWA 15929:2009. Best practices for the design and development of critical information systems
09/30199512 DC 09/30199512 DC. BS EN 2591-307. Aerospace series. Elements of electrical and optical connection. Test methods. Part 307. Salt mist
09/30199515 DC 09/30199515 DC. BS EN 2591-402. Aerospace series. Elements of electrical and optical connection. Test methods. Part 402. Shock
09/30199518 DC 09/30199518 DC. BS EN 2591-403. Aerospace series. Elements of electrical and optical connection. Test methods. Part 403. Sinusoidal and random vibration
09/30199552 DC 09/30199552 DC. BS ISO/IEC 18014-3. Information technology. Security techniques. Time-stamping services. Part 3. Mechanisms producing linked tokens
09/30199557 DC 09/30199557 DC. BS ISO 15686-10. Buildings and constructed assets. Service life planning. Part 10. When to assess functional performance
09/30199560 DC 09/30199560 DC. BS 8243. Installation and configuration of intruder and hold-up alarm systems designed to generate confirmed alarm conditions. Code of practice
09/30199571 DC 09/30199571 DC. BS EN 60335-2-60 AMD. Household and similar electrical appliances. Safety. Part 2-60. Particular requirements for whirlpool baths and whirlpool spas
09/30199575 DC 09/30199575 DC. BS 7846. Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V, having low emission of smoke and corrosive gases when affected by fire. Specification
09/30199583 DC 09/30199583 DC. BS EN 62059-32-1. Electricity metering equipment. Dependability. Part 32-1. Durability. Testing of the stability of metrological characteristics by applying elevated temperature
09/30199592 DC 09/30199592 DC. BS EN 62489-2. Electroacoustics. Audio-frequency induction loop systems for assisted hearing. Part 2. Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
ISO10985 : 2009 EDTN3 ISO10985 : 2009 EDTN3. ISO 10985 Caps made of aluminium-plastics combinations for infusion bottles and injection vials - Requirements and test methods
09/30199661 DC 09/30199661 DC. BS ISO 18072-2. Ships and marine technology. Ship structures. Part 2. Requirements for their ultimate strength limit state assessment
09/30199704 DC 09/30199704 DC. BS EN 60862-2. Surface acoustic wave (SAW) filters of assessed quality. Part 2. Guide to the use
09/30199755 DC 09/30199755 DC. BS EN 15933. Soil, sludge, and treated biowaste. Determination of pH
09/30199758 DC 09/30199758 DC. BS EN 61754-26. Fibre optic connector interfaces. Part 26. Type SF connector family
09/30199762 DC 09/30199762 DC. BS EN 15934. Sludge, waste, soil and treated biowaste. Determination of dry matter. Gravimetric method
09/30199765 DC 09/30199765 DC. BS EN 15935. Soil, sludge, waste, and treated biowaste. Determination of loss on ignition
09/30199768 DC 09/30199768 DC. BS EN 15936. Sludge, waste, treated biowaste and soil. Determination of total organic carbon (TOC) by dry combustion
09/30199771 DC 09/30199771 DC. BS EN 15937. Soil, sludge, and treated biowaste. Determination of specific electrical conductivity
09/30199792 DC 09/30199792 DC. BS EN 61747-6-1. Liquid crystal display devices. Part 6-1. Measuring methods for liquid crystal display modules. Transmissive type
BS EN 15655:2009 BS EN 15655:2009. Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods
09/30199811 DC 09/30199811 DC. BS EN 4632-006. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. Part 006. Homogeneous assemblies titanium alloys
09/30199816 DC 09/30199816 DC. BS EN 2714-002. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Part 002. Screened and jacketed. General
09/30199821 DC 09/30199821 DC. BS EN 2267-002. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C. Part 002. General
ISO/IEC15418 : 2009 EDTN2 ISO/IEC15418 : 2009 EDTN2. ISO/IEC 15418 Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
09/30199926 DC 09/30199926 DC. BS EN 3155-026. Aerospace series. Electrical contacts used in elements of connection. Part 026. Contacts, electrical, male, type A, crimp, class R. Product standard
09/30199941 DC 09/30199941 DC. BS EN 61010-2-091. Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-091. Requirements for cabinet x-ray systems
09/30199945 DC 09/30199945 DC. BS EN 61010-2-092. Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-092. Particular requirements for equipment rated for use by children and young people in educational establishments
09/30199949 DC 09/30199949 DC. BS EN 60461. Time and control code (TA6)
09/30199968 DC 09/30199968 DC. BS EN 62040-3 AMD1. Uninterruptible power systems (UPS). Part 3. Method of specifying the performance and test requirements
CWA 15931-1:2009 CWA 15931-1:2009. Disaster and emergency management. Shared situation awareness. Message structure
CWA 15931-2:2009 CWA 15931-2:2009. Disaster and emergency management. Shared situation awareness. Codes for the message structure
09/30199993 DC 09/30199993 DC. BS EN 61076-2. Connectors for electronic equipment. Product requirements. Part 2. Circular connectors. Sectional specification
09/30199997 DC 09/30199997 DC. BS EN 61076-2-001. Connectors for electronic equipment. Product requirements. Part 2-001. Circular connectors. Blank detail specification
09/30200025 DC 09/30200025 DC. BS ISO 11784 AMD2. Radio frequency identification of animals. Code structure
09/30200031 DC 09/30200031 DC. BS EN 15938. Automotive fuels. Ethanol blending component and ethanol (E85) fuel. Determination of electrical conductivity
09/30200088 DC 09/30200088 DC. BS EN 14879-6. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Part 6. Combined linings with tile and brick layers
09/30200092 DC 09/30200092 DC. BS EN 10051. Hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
ISO/IECTR24785 : 2009 ED1 ISO/IECTR24785 : 2009 ED1. Information technology. Taxonomy of cultural and linguistic adaptability user requirements
09/30200098 DC 09/30200098 DC. BS EN 50395 AMD1. Electrical test methods for low voltage energy cables
09/30200102 DC 09/30200102 DC. BS EN 50396 AMD1. Non electrical test methods for low voltage electric cables
09/30200106 DC 09/30200106 DC. BS EN 50363-0 AMD1. Insulating, sheathing and covering materials for low voltage energy cables. General introduction
09/30200109 DC 09/30200109 DC. BS EN 50363-2-1 AMD1. Insulating, sheathing and covering materials for low-voltage energy cables. Part 2-1. Cross-linked elastomeric sheathing compounds
09/30200113 DC 09/30200113 DC. BS EN 50363-3 AMD1. Insulating, sheathing and covering materials for low voltage energy cables. Part 3. PVC insulating compounds
09/30200117 DC
09/30200120 DC 09/30200120 DC. BS EN 50363-6 AMD1. Insulating, sheathing and covering materials forlow-voltage energy cables. Part 6. Halogen-free, cross-linked sheathing compounds
09/30200123 DC 09/30200123 DC. BS EN 50363-8 AMD1. Insulating, sheathing and covering materials for low voltage energy cables. Part 8. Halogen-free, thermoplastic sheathing compounds
09/30200131 DC 09/30200131 DC. BS EN ISO 20345. Personal protective equipment. Safety footwear
09/30200143 DC 09/30200143 DC. BS EN 62080. Sound signalling devices for household and similar purposes
09/30200146 DC 09/30200146 DC. BS EN ISO 20344. Personal protective equipment. Test methods for footwear
09/30200151 DC 09/30200151 DC. BS EN ISO 20346. Personal protective equipment. Protective footwear
09/30200155 DC 09/30200155 DC. BS EN ISO 20347. Personal protective equipment. Occupational footwear
BS EN ISO 13370:2007 BS EN ISO 13370:2007. Thermal performance of buildings. Heat transfer via the ground. Calculation methods
09/30200251 DC 09/30200251 DC. BS EN 3375-002. Aerospace series. Cable, electrical, for digital data transmission. Part 002. General
09/30200342 DC 09/30200342 DC. BS ISO 29383. Terminology policies. Development and implementation
09/30200385 DC 09/30200385 DC. BS EN 60130-9. Connectors for frequencies below 3 MHz. Part 9. Circular connectors for radio and associated sound equipment
09/30200395 DC 09/30200395 DC. BS EN 61837-2. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Part 2. Ceramic enclosures
09/30200401 DC 09/30200401 DC. BS EN 61240. Piezoelectric devices. Preparation of outline drawings of surface mounted devices (SMD) for frequency control and selection. General rules
09/30200407 DC 09/30200407 DC. BS EN 50526-1. Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices. Part 1. Surge arresters
09/30200413 DC 09/30200413 DC. BS EN 60317-1. Specifications for particular types of winding wires. Part 1. Polyvinyl acetal enamelled round copper wire, class 105
09/30200475 DC 09/30200475 DC. BS EN 60317-3 AMD1. Specifications for particular types of winding wires. Part 3. Polyester enamelled round copper wire, class 155
09/30200483 DC 09/30200483 DC. BS EN ISO 5457 AMD1. Technical product documentation. Sizes and layout of drawing sheets
09/30200487 DC 09/30200487 DC. BS EN 60317-8. Specifications for particular types of winding wires. Part 8. Polyesterimide enamelled round copper wire, class 180
09/30200498 DC 09/30200498 DC. BS EN 60317-12. Specifications for particular types of winding wire. Part 12. Polyvinyl acetal enamelled round copper wire, class 120
09/30200517 DC 09/30200517 DC. BS EN 60317-13. Specifications for particular types of winding wires. Part 13. Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
09/30200527 DC 09/30200527 DC. BS EN 60317-15 AMD1. Specifications for particular types of winding wires. Part 15. Polyesterimide enamelled round aluminium wire, class 180
09/30200536 DC 09/30200536 DC. BS EN 60317-17. Specifications for particular types of winding wire. Part 17. Polyvinyl acetal enamelled rectangular copper wire, class 105
09/30200543 DC 09/30200543 DC. BS EN 60317-18 AMD1. Specifications for particular types of winding wires. Part 18. Polyvinyl acetal enamelled rectangular copper wire, class 120
09/30200548 DC 09/30200548 DC. BS EN 60317-22 AMD1. Specifications for particular types of winding wires. Part 22. Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
09/30200554 DC 09/30200554 DC. BS EN 60317-25. Specifications for particular types of winding wires. Part 25. Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminum wire, class 200
09/30200559 DC 09/30200559 DC. BS EN 60745-2-19 AMD1. Hand-held motor-operated electric tools. Safety. Part 2-19. Particular requirements for jointers
09/30200572 DC 09/30200572 DC. BS EN 60317-26 AMD2. Specifications for particular types of winding wires. Part 26. Polyamide-imide enamelled round copper wire, class 200
09/30200576 DC 09/30200576 DC. BS EN 60745-2-14. Hand-held motor-operated electric tools. Safety. Part 2-14. Particular requirements for planers
09/30200585 DC 09/30200585 DC. BS EN 60317-29 AMD2. Specifications for particular types of winding wires. Part 29. Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
09/30200589 DC 09/30200589 DC. BS EN 60317-42 AMD1. Specifications for particular types of winding wires. Part 42. Polyester-amide-imide enamelled round copper wire, class 200
09/30200593 DC 09/30200593 DC. BS EN 60317-43 AMD1. Specifications for particular types of winding wires. Part 43. Aromatic polyimide tape wrapped round copper wire, class 240
09/30200597 DC 09/30200597 DC. BS EN 60745-2-2 AMD. Hand-held motor-operated electric tools. Safety. Part 2-2. Particular requirements for screwdrivers and impact wrenches
09/30200601 DC 09/30200601 DC. BS EN 60317-44 AMD1. Specifications for particular types of winding wires. Part 44. Aromatic polyimide tape wrapped rectangular copper wire, class 240
09/30200606 DC 09/30200606 DC. BS EN 60745-2-11 AMD. Hand-held motor-operated electric tools. Safety. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)
09/30200619 DC 09/30200619 DC. BS EN 61892-1. Mobile and fixed offshore units. Electrical installations. Part 1. General requirements and conditions
09/30200661 DC 09/30200661 DC. BS EN 60669-1. Switches for household and similar fixed-electrical installations. Part 1. General requirements
09/30200666 DC 09/30200666 DC. BS EN 62341-6-2. Organic light emitting diode (OLED) displays. Part 6-2. Measuring methods of visual quality
09/30200675 DC 09/30200675 DC. BS EN 60669-2-1 AMD. Switches for household and similar fixed electrical installations. Part 2-1. Particular requirements. Electronic switches
CWA 15517:2009 CWA 15517:2009. European handbook for defence procurement
CWA 15940:2009 CWA 15940:2009. Automotive fuels. Paraffinic diesel from synthesis or hydrotreatment. Requirements and test methods
09/30200741 DC 09/30200741 DC. BS EN 60947-8 AMD2. Low-voltage switchgear and controlgear. Part 8. Control units for built-in thermal protection (PTC) for rotating electrical machines
09/30200763 DC 09/30200763 DC. BS ISO/IEC 14496-3 AMD1. Information technology. Coding of audio-visual objects. Part 3. Audio
09/30200776 DC 09/30200776 DC. BS ISO/IEC 14496-27 AMD1. Information technology. Coding of audio-visual objects. Part 27. 3D Graphics conformance
09/30200785 DC 09/30200785 DC. BS EN 60122-3. Quartz crystal units of assessed quality. Part 3. Standard outlines and lead connections
09/30200793 DC 09/30200793 DC. BS EN 61994-2. Piezoelectric and dielectric devices for frequency control and selection. Glossary. Part 2. Piezoelectric and dielectric filters
BIP 3082:2009 BIP 3082:2009. BS 8888:2008. Technical product specification (TPS). CD-ROM
09/30200820 DC 09/30200820 DC. BS ISO/IEC 14496-10 AMD1. Information technology. Coding of audio-visual objects. Part 10. Advanced Video Coding
09/30200871 DC 09/30200871 DC. BS EN 2591-227. Aerospace series. Elements of electrical and optical connection. Test methods. Part 227. Partial discharges test
09/30200888 DC 09/30200888 DC. BS EN 4644-003. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts. Operating temperature 125°C or 175°C continuous. Part 003. Rectangular inserts. Product standard
09/30200901 DC 09/30200901 DC. BS EN 4644-131. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175°C (or 125°C) continuous. Part 131. Size 3 plug for rack and Panel applications. Product standard
09/30200910 DC 09/30200910 DC. BS EN 4644-133. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175°C (or 125°C) continuous. Part 133. Size 3 receptacle for rack and panel application. Product standard
09/30200929 DC 09/30200929 DC. BS EN 4644-141. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175°C (or 125°C) continuous. Part 141. Size 4 plug for rack and panel applications. Product standard
09/30200941 DC 09/30200941 DC. BS EN 4644-142. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175°C (or 125°C) continuous. Part 142. Size 4 receptacle for rack and panel application. Product standard
09/30200957 DC 09/30200957 DC. BS ISO/IEC 14496-26 AMD1. Information technology. Coding of audio-visual objects. Part 26. Audio conformance
BS ISO 815-1:2008 BS ISO 815-1:2008. Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
09/30201036 DC 09/30201036 DC. BS EN 4677-002. Aerospace series. Welded and brazed assemblies for aerospace constructions. Electron beam welding machine. Part 002. Qualification specifications
09/30201049 DC 09/30201049 DC. BS EN 61249-2-41. Materials for printed boards and other interconnecting structures. Part 2-41. Reinforced base materials clad and unclad. Brominated Epoxide cellulose paper /woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
09/30201330 DC 09/30201330 DC. BS EN 60534-8-3. Industrial-process control valves. Part 8-3. Noise considerations. Control valve aerodynamic noise prediction method
09/30201377 DC 09/30201377 DC. BS EN 3274. Aerospace series. Pipe coupling 8°30'. Thread end. Geometric configuration
BS EN 200:2008 BS EN 200:2008. Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
09/30201382 DC 09/30201382 DC. BS EN 4685. Aerospace series. Titanium Ti10V2Fe3Al. Bars. D < 110 mm. Rm 3M 1240 MPa
09/30201385 DC 09/30201385 DC. BS EN 60603-7-2. Connectors for electronic equipment. Part 7-2. Detail specification for 8-way, unshielded free and fixed connectors, for data transmissions with frequencies up to 100 MHz
BS EN 50492:2008 BS EN 50492:2008. Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations
BS EN 50492:2008 BS EN 50492:2008. Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations
09/30201391 DC 09/30201391 DC. BS EN 55016-4-2. Specification for radio disturbance and immunity measuring apparatus and methods. Part 4-2. Uncertainties, statistics and limit modeling. Measurement instrumentation uncertainty
09/30201398 DC 09/30201398 DC. BS EN 62034. Automatic test systems for battery powered emergency escape lighting
09/30201403 DC 09/30201403 DC. BS EN 3268. Aerospace series. Pipe coupling 8°30' in titanium alloy. Pressure plugs
09/30201406 DC 09/30201406 DC. BS EN 4686. Aerospace series. Pipe coupling 8°30' in titanium alloy. Equipped blind ferrules
09/30201541 DC 09/30201541 DC. BS EN 60603-7-3. Connectors for electronic equipment. Part 7-3. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
09/30201553 DC 09/30201553 DC. BS EN 60603-7-4. Connectors for electronic equipment. Part 7-4. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
09/30201561 DC 09/30201561 DC. BS EN 60603-7-5. Connectors for electronic equipment. Part 7-5. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
09/30201591 DC 09/30201591 DC. BS EN 60603-7-7. Connectors for electronic equipment. Part 7-7. Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
BS EN 508-2:2008 BS EN 508-2:2008. Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet. Aluminium
09/30201614 DC 09/30201614 DC. BS EN ISO 3741. Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
09/30201621 DC 09/30201621 DC. BS EN ISO 3743-1. Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields. Part 1. Comparison method for hard-walled test rooms
09/30201631 DC 09/30201631 DC. BS EN ISO 3745. Acoustics. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
09/30201636 DC 09/30201636 DC. BS EN ISO 3745. Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for anechoic and semi-anechoic rooms
09/30201640 DC 09/30201640 DC. BS EN ISO 3746. Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
09/30201664 DC 09/30201664 DC. BS EN ISO 12100. Safety of machinery. General principles for design, risk assessment and risk reduction
09/30201707 DC 09/30201707 DC. BS EN 60664-3 AMD1. Insulation coordination for equipment within low-voltage systems. Part 3. Use of coating, potting or moulding for protection against pollution
09/30201712 DC 09/30201712 DC. BS EN 60534-7. Industrial-process control valves. Part 7. Control valve data sheet
09/30201742 DC 09/30201742 DC. BS EN ISO 13982-1 AMD1. Protective clothing for use against solid particulates. Part 1. Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
BIP 2180:2009 BIP 2180:2009. Energy-using Products: A Guide to the implementation of European Directive 2005/32/EC
09/30201764 DC 09/30201764 DC. BS EN 50364. Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
09/30201784 DC 09/30201784 DC. BS EN 50366 ISA. Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement
09/30201827 DC 09/30201827 DC. BS EN 60793-2-10. Optical fibres. Part 2-10. Product specifications. Sectional specification for category A1 multimode fibres
BS EN 12373-7:2002 BS EN 12373-7:2002. Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
09/30201868 DC 09/30201868 DC. BS EN 61300-3-28. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-28. Examinations and measurements. Transient loss
PAS 44:2009 PAS 44:2009. Official identification for cattle. Specification
09/30202067 DC 09/30202067 DC. BS EN 1342. Setts of natural stone for external paving. Requirements and test methods
09/30202071 DC 09/30202071 DC. BS EN 9115. Quality Management Systems. Requirements for Aviation, Space and Defense Organizations. Requirements for Deliverable Software
09/30202174 DC 09/30202174 DC. BS EN 50159. Railway applications. Communication, signalling and processing systems. Safety-related communication in transmission systems
09/30202183 DC 09/30202183 DC. BS EN 6059-503. Electrical cables, installation. Protection sleeves. Test methods. Part 503. Temperature rise due to rated current
09/30202200 DC 09/30202200 DC. BS EN 3197. Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
09/30202368 DC 09/30202368 DC. BS 5760-18. Reliability of systems, equipment and components. Part 18. Guide to the demonstration of dependability requirements. The dependability case
09/30202372 DC 09/30202372 DC. BS ISO 10936-2. Optics and photonics. Operation microscopes. Part 2. Light hazard from operation microscopes used in ocular surgery
09/30202389 DC 09/30202389 DC. BS EN 4681-004. Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. Part 004. ADA family, single and multicore assembly. Product standard
09/30202398 DC 09/30202398 DC. BS EN 61000-4-4 AMD1. Electromagnetic compatibility (EMC). Part 4-4. Testing and measurement techniques. Electrical fast transient/burst immunity test
09/30202402 DC 09/30202402 DC. BS EN 4681-003. Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. Part 003. AD family, single, UV laser printable. Product standard
09/30202407 DC 09/30202407 DC. BS EN 4681-002. Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. Part 002. General
09/30202409 DC 09/30202409 DC. BS EN 4681-001. Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. Part 001. Technical specification
09/30202411 DC 09/30202411 DC. BS EN 4651. Aerospace series. Copper-clad aluminium alloy conductors for electrical cables. Product standard
09/30202412 DC 09/30202412 DC. BS EN 4682-001. Aerospace series. Cables, electric, screened and jacketed, general purpose, with conductors in aluminium or copper-clad aluminium. Part 001. Technical specification
09/30202413 DC 09/30202413 DC. BS EN 4682-002. Aerospace series. Cables, electric, screened and jacketed, general purpose, with conductors in aluminium or copper-clad aluminium. Part 002. General
09/30202414 DC 09/30202414 DC. BS EN 4682-003. Aerospace series. Cables, electric, screened and jacketed, general purpose, with conductors in aluminium or copper-clad aluminium. Part 003. AD family, screened (spiral) and jacketed, UV laser printable. Product standard
09/30202438 DC 09/30202438 DC. BS EN 61969-1. Mechanical structures for electronic equipment. Outdoor enclosures. Part 1. Design guidelines
09/30202442 DC 09/30202442 DC. BS EN 61969-2. Mechanical structures for electronic equipment. Outdoor enclosures. Part 2. Coordination dimensions
09/30202446 DC 09/30202446 DC. BS EN 61969-3. Mechanical structures for electronic equipment. Outdoor enclosures. Part 3. Environmental requirements and tests, safety aspects
ISO/IECTR24784:2009 EDTN1 ISO/IECTR24784:2009 EDTN1. ISO/IEC24784 : 2009 Information technology. Keyboard layouts for alphanumeric inputs. Description of ISO/IEC 9995 issues regarding users' needs and necessary innovations
09/30202505 DC 09/30202505 DC. BS EN 50367. Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
09/30202642 DC 09/30202642 DC. BS EN ISO 16484-1. Building automation and control systems (BACS). Part 1. Project specification and implementation
09/30202690 DC 09/30202690 DC. BS EN 80416-3 AMD1. Basic principles for use on equipment. Part 3. Guidelines for the application of graphical symbols
BS EN 61300-2-44:2008 BS EN 61300-2-44:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flexing of the strain relief of fibre optic devices
BS ISO 7206-1:2008 BS ISO 7206-1:2008. Implants for surgery. Partial and total hip joint prostheses. Classification and designation of dimensions
09/30202761 DC 09/30202761 DC. BS EN ISO 6498. Animal feeding stuffs. Guidelines for sample preparation
09/30202780 DC 09/30202780 DC. BS EN 50110-2. Operation of electrical installations. Part 2. National annexes
09/30202783 DC 09/30202783 DC. BS EN 50065-1 AMD1. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 1. General requirements, frequency bands and electromagnetic disturbances
09/30203034 DC 09/30203034 DC. BS EN 13313. Refrigerating systems and heat pumps. Competence of personnel. Complementary element
09/30203113 DC 09/30203113 DC. BS EN 4666. Aerospace series. Aircraft integrated air quality and pressure standards, criteria and determination methods
09/30203151 DC 09/30203151 DC. BS EN 60745-2-1 AMD1. Hand-held motor-operated electric tools. Safety. Part 2-1. Particular requirements for drills and impact drills
09/30203154 DC 09/30203154 DC. BS EN 60745-2-2 AMD1. Hand-held motor-operated electric tools. Safety. Part 2-2. Particular requirements for screwdrivers and impact wrenches
09/30203158 DC 09/30203158 DC. BS EN 60745-2-3 AMD. Hand-held motor-operated electric tools. Safety. Part 2-3. Particular requirements for grinders, polishers and disk-type sanders
09/30203161 DC 09/30203161 DC. BS EN 60745-2-6 AMD1. Hand-held motor-operated electric tools. Safety. Part 2-6. Particular requirements for hammers
09/30203166 DC 09/30203166 DC. BS EN 60745-2-11 AMD1. Hand-held motor-operated electric tools. Safety. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)
09/30203195 DC 09/30203195 DC. BS EN 15497. Finger jointed structural timber. Performance requirements and minimum production requirements
09/30203267 DC 09/30203267 DC. BS EN 60749-15. Semiconductor devices. Mechanical and climatic test methods. Part 15. Resistance to soldering temperature for through-hole mounted devices
BS EN 13104:2009 BS EN 13104:2009. Railway applications. Wheelsets and bogies. Powered axles. Design method



Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment