2009/09/07

Cheapest & Latest BSI Standard (PDF) (41)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


98/120045DC 98/120045DC. BS ISO 10346-3:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 3. Determination of calcium oxide and magnesium oxide by complexometry (ISO 10346-3)
98/120044DC 98/120044DC. BS ISO 10346-2:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 2. Determination of aluminium oxide by complexometry and total iron (III) oxide and titanium oxide by molecular absorption spectrometry (ISO 10346-2)
98/120043DC 98/120043DC. BS ISO 10346-1:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 1. Determination of silicon dioxide by gravimetry and molecular absorption spectrometry (ISO 10346-1)
BS 7921:1998 BS 7921:1998. Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification
BS EN 12181:1998 BS EN 12181:1998. Oropharyngeal airways
98/700251DC 98/700251DC. Aerospace series. Electrical cables, installation, protection sleeves. Test methods. Part 305. Mould growth (prEN 6059-306)
98/700244DC 98/700244DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 202. Dimensions and mass (prEN 6059-202)
98/700243DC 98/700243DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 201. Visual inspection (prEN 6059-201)
98/700242DC 98/700242DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 100. General (prEN 6059-100)
98/700344DC 98/700344DC. Aerospace series. Requirements and test procedures for relays and contactors. Part 407. Cold/low pressure and moist heat (prEN 2349-407). Cold/low pressure and moist heat
BS EN 1934:1998 BS EN 1934:1998. Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry
BS ISO 13756:1997 BS ISO 13756:1997. Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using sodium chloride or potassium chloride
BS EN 1918-1:1998 BS EN 1918-1:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in aquifers
BS EN 1918-2:1998 BS EN 1918-2:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in oil and gas fields
BS EN 1918-4:1998 BS EN 1918-4:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in rock caverns
BS EN 1918-3:1998 BS EN 1918-3:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in solution-mined salt cavities
BS EN 1918-5:1998 BS EN 1918-5:1998. Gas supply systems. Underground gas storage. Functional recommendations for surface facilities
BS EN ISO 10993-2:1998 BS EN ISO 10993-2:1998. Biological evaluation of medical devices. Animal welfare requirements
BS 7755-4.2.2:1998, ISO 11268-2:1998 BS 7755-4.2.2:1998, ISO 11268-2:1998. Soil quality. Biological methods. Effects of pollutants on soil fauna. Determination of effects on reproduction on earthworms (Eisenia fetida)
BS ISO 8893:1997 BS ISO 8893:1997. Forestry machinery. Portable brush cutters and grass trimmers. Engine performance and fuel consumption
BS 6916-7:1998, ISO 7293:1997 BS 6916-7:1998, ISO 7293:1997. Chain saws. Method of evaluating engine performance including fuel consumption
BS EN ISO 11306:1998 BS EN ISO 11306:1998. Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water
BS EN 793:1998 BS EN 793:1998. Particular requirements for safety of medical supply units
BS 7012-6:1998, ISO 8577:1997 BS 7012-6:1998, ISO 8577:1997. Light microscopes. Specification for spectral filters
BS EN 1392:1998 BS EN 1392:1998. Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Test methods for measuring the bond strength under specified conditions
BS 7012-11:1998, ISO 12853:1997 BS 7012-11:1998, ISO 12853:1997. Light microscopes. Information provided to the user
BS EN 522:1998 BS EN 522:1998. Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification
BS EN 923:1998 BS EN 923:1998. Adhesives. Terms and definitions
BS EN 1239:1998 BS EN 1239:1998. Adhesives. Freeze-thaw stability
BS EN 1240:1998 BS EN 1240:1998. Adhesives. Determination of hydroxyl value and/or hydroxyl content
BS EN 1241:1998 BS EN 1241:1998. Adhesives. Determination of acid value
BS EN 1242:1998 BS EN 1242:1998. Adhesives. Determination of isocyanate content
BS EN 1244:1998 BS EN 1244:1998. Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light
BS EN 1246:1998 BS EN 1246:1998. Adhesives. Determination of ash and sulfated ash
BS EN 1391:1998 BS EN 1391:1998. Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification
BS EN 1013-3:1998 BS EN 1013-3:1998. Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
BS EN 1013-1:1998 BS EN 1013-1:1998. Light transmitting profiled plastic sheeting for single skin roofing. General requirements and test methods
BS EN 131700:1998 BS EN 131700:1998. Harmonized system of quality assessment for electronic components. Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
DD ENV 12936:1998 DD ENV 12936:1998. Feather and down. Determination of the permanent deformation after dynamic fatigue stress under constant load
BS EN 1727:1998 BS EN 1727:1998. Domestic furniture. Storage furniture. Safety requirements and test methods
BS EN 1272:1998 BS EN 1272:1998. Child care articles. Table mounted chairs. Safety requirements and test methods
BS 7913:1998 BS 7913:1998. Guide to the principles of the conservation of historic buildings
BS ISO 11632:1998 BS ISO 11632:1998. Stationary source emissions. Determination of mass concentration of sulfur dioxide. Ion chromatography method
BS ISO 11564:1998 BS ISO 11564:1998. Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method
BS EN ISO 140-8:1998 BS EN ISO 140-8:1998. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
BS ISO 4037-1:1996 BS ISO 4037-1:1996. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Radiation characteristics and production methods
BS EN ISO 8861:1998 BS EN ISO 8861:1998. Shipbuilding. Engine-room ventilation in diesel-engined ships. Design requirements and basis of calculations
BS 7403-4:1998, ISO 4548-4:1997 BS 7403-4:1998, ISO 4548-4:1997. Full-flow lubricating oil filters for internal combustion engines. Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
BS 7403-3:1998, ISO 4548-3:1997 BS 7403-3:1998, ISO 4548-3:1997. Full-flow lubricating oil filters for internal combustion engines. Methods of test for resistance to high differential pressure and to elevated temperature
BS 7403-2:1998, ISO 4548-2:1997 BS 7403-2:1998, ISO 4548-2:1997. Full-flow lubricating oil filters for internal combustion engines. Method of test for element by-pass valve characteristics
BS 7403-1:1998, ISO 4548-1:1997 BS 7403-1:1998, ISO 4548-1:1997. Full-flow lubricating oil filters for internal combustion engines. Methods of test for differential pressure/flow characteristics
BS ISO 9102:1997 BS ISO 9102:1997. Diesel engines. Screw-in injection nozzle holders types 24, 25, 26 and 26.1
BS EN 61800-1:1998, IEC 61800-1:1997 BS EN 61800-1:1998, IEC 61800-1:1997. Adjustable speed electrical power drive systems. Rating specifications for low voltage adjustable speed d.c. power drive systems
BS ISO 7176-4:1997 BS ISO 7176-4:1997. Wheelchairs. Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
BS ISO 3897:1997 BS ISO 3897:1997. Photography. Processed photographic plates. Storage practices
BS EN 45014:1998 BS EN 45014:1998. General criteria for supplier's declaration of conformity
BS EN 45020:1998 BS EN 45020:1998. Standardization and related activities. General vocabulary
BS IEC 61336:1996 BS IEC 61336:1996. Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS IEC 60748-2:1997 BS IEC 60748-2:1997. Semiconductor devices. Integrated circuits. Digital integrated circuits
BS 7911:1998 BS 7911:1998. Specification for organizations conducting market research
BS EN 61628-1:1998, IEC 61628-1:1997 BS EN 61628-1:1998, IEC 61628-1:1997. Corrugated pressboard and presspaper for electrical purposes. Definitions, designations and general requirements
BS EN 181104:1998 BS EN 181104:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: wavelength selective transmissive star for telecommunication application
BS EN 181103:1998 BS EN 181103:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: non wavelength selective transmissive star for telecommunication application
BS 5202-19:1998, ISO 6488-1:1997 BS 5202-19:1998, ISO 6488-1:1997. Methods for chemical analysis of tobacco and tobacco products. Determination of water content (Karl Fischer method)
BS ISO 10110-13:1997 BS ISO 10110-13:1997. Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold
BS EN 10090:1998 BS EN 10090:1998. Valve steels and alloys for internal combustion engines
BS 3936-9:1998 BS 3936-9:1998. Nursery stock. Specification for bulbs, corms and tubers
BS ISO/TR 12765:1998 BS ISO/TR 12765:1998. Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS ISO 13359:1998 BS ISO 13359:1998. Measurement of conductive liquid flow in closed conduits. Flanged electromagnetic flowmeters. Overall length
BS EN 12475-1:1998, BS 7225-1.2:1998 BS EN 12475-1:1998, BS 7225-1.2:1998. Classification of dense shaped refractory products. Alumina-silica products
BS EN 12475-2:1998, BS 7225-1.3:1998 BS EN 12475-2:1998, BS 7225-1.3:1998. Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon
BS EN 12475-3:1998, BS 7225-1-1.4:1998 BS EN 12475-3:1998, BS 7225-1-1.4:1998. Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon
BS EN ISO 11985:1998 BS EN ISO 11985:1998. Ophthalmic optics. Contact lenses. Ageing by exposure to UV and visible radiation (in vitro method)
BS EN 130902:1998 BS EN 130902:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level EZ
BS EN 130901:1998 BS EN 130901:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level E
BS EN 130900:1998 BS EN 130900:1998. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS EN 131802:1998 BS EN 131802:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level EZ
BS EN 131801:1998 BS EN 131801:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E
BS EN 131800:1998 BS EN 131800:1998. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 675:1998 BS EN 675:1998. Glass in building. Determination of thermal transmittance (U value). Heat flow meter method
BS EN 674:1998 BS EN 674:1998. Glass in building. Determination of thermal transmittance (U value). Guarded hot plate method
BS ISO 3338-1:1996 BS ISO 3338-1:1996. Cylindrical shanks for milling cutters. Dimensional characteristics of plain cylindrical shanks
BS ISO 3338-2:1996 BS ISO 3338-2:1996. Cylindrical shanks for milling cutters. Dimensional characteristics of flatted cylindrical shanks
BS ISO 10914:1996 BS ISO 10914:1996. Assembly tools for screws and nuts. Sockets and wrenches for spline drive
BS 6102-5:1998, ISO 5775-1:1997 BS 6102-5:1998, ISO 5775-1:1997. Cycles. Specification for bicycle tyre designations and dimensions
BS 1741-13:1998, ISO 11868:1997 BS 1741-13:1998, ISO 11868:1997. Methods for chemical analysis of liquid milk and cream. Determination of lactulose content of heat-treated milk (HPLC method)
BS 5086-5:1998, ISO 1738:1997 BS 5086-5:1998, ISO 1738:1997. Analysis of butter. Method for determination of salt content
BS EN 60814:1998, IEC 60814:1997 BS EN 60814:1998, IEC 60814:1997. Insulating liquids. Oil-impregnated paper and pressboard. Determination of water by automatic coulometric Karl Fischer titration
BS 4585-3:1998, ISO 928:1997 BS 4585-3:1998, ISO 928:1997. Methods of test for spices and condiments. Determination of total ash
BS EN 12006-2:1998 BS EN 12006-2:1998. Non-active surgical implants. Particular requirements for cardiac and vascular implants. Vascular prostheses including cardiac valve conduits
BS EN 60034-9:1998, IEC 60034-9:1997 BS EN 60034-9:1998, IEC 60034-9:1997. Rotating electrical machines. Noise limits
BS ISO 3865:1997, BS 903-A33:1998 BS ISO 3865:1997, BS 903-A33:1998. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS EN ISO 15004:1998 BS EN ISO 15004:1998. Ophthalmic instruments. Fundamental requirements and test methods
BS EN 60534-6-1:1998, IEC 60534-6-1:1997 BS EN 60534-6-1:1998, IEC 60534-6-1:1997. Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mounting on linear actuators
BS EN 186260:1998 BS EN 186260:1998. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type SC
BS ISO 6133:1998 BS ISO 6133:1998. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS EN 12256:1998, BS 2782-11:Method 1111F:1998 BS EN 12256:1998, BS 2782-11:Method 1111F:1998. Plastic piping systems. Thermoplastic fittings. Test method for mechanical strength or flexibility of fabricated fittings
BS ISO 10897:1996 BS ISO 10897:1996. Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
BS ISO 11345:1997, BS 903-A65:1998 BS ISO 11345:1997, BS 903-A65:1998. Rubber. Assessment of carbon black dispersion. Rapid comparative methods
BS ISO 4834:1997 BS ISO 4834:1997. Cinematography. Magnetic sound test films excluding striped release prints. Basic technical characteristics
BS EN 10056-1:1999 BS EN 10056-1:1999. Specification for structural steel equal and unequal angles. Dimensions
BS ISO 9897:1997 BS ISO 9897:1997. Freight containers. Container equipment data exchange (CEDEX). General communication codes
BS ISO 6196-3:1997 BS ISO 6196-3:1997. Micrographics. Vocabulary. Film processing
BS EN ISO 11593:1998 BS EN ISO 11593:1998. Manipulating industrial robots. Automatic end effector systems. Vocabulary and presentation of characteristics
BS 684-2.46:1998, ISO 9936:1997 BS 684-2.46:1998, ISO 9936:1997. Methods of analysis of fats and fatty oils. Other methods. Determination of tocopherols and tocotrienols contents
BS ISO 14808:1997 BS ISO 14808:1997. Photography. Composition of 135-film canisters
BS ISO/IEC 10514-3:1998 BS ISO/IEC 10514-3:1998. Information technology. Programming languages. Modula-2, object-oriented Modula-2
BS ISO/IEC 10514-2:1998 BS ISO/IEC 10514-2:1998. Information technology. Programming languages. Modula-2, generics in Modula-2
BS EN 60870-6-503:1998, IEC 60870-6-503:1997 BS EN 60870-6-503:1998, IEC 60870-6-503:1997. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.2 services and protocol
BS EN 60870-6-802:1998, IEC 60870-6-802:1997 BS EN 60870-6-802:1998, IEC 60870-6-802:1997. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.2 object models
BS 5266-2:1998 BS 5266-2:1998. Emergency lighting. Code of practice for electrical low mounted way guidance systems for emergency use
BS EN 1559-5:1998 BS EN 1559-5:1998. Founding. Technical conditions of delivery. Additional requirements for magnesium alloy castings
BS EN 45510-5-4:1998 BS EN 45510-5-4:1998. Guide for the procurement of power station equipment. Hydraulic turbines, storage pumps and pump-turbines
BS EN 1661:1998 BS EN 1661:1998. Hexagon nuts with flange
BS X 36:1998 BS X 36:1998. Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes
BS X 35:1998 BS X 35:1998. Specification for selectively removable intermediate coating for aerospace purposes
BS 5X 17:1998 BS 5X 17:1998. Specification for oleoresinous varnish for aerospace purposes
BS EN 1663:1998 BS EN 1663:1998. Prevailing torque type hexagon nuts with flange (with non-metallic insert)
BS EN 1664:1998 BS EN 1664:1998. Prevailing torque type all-metal hexagon nuts with flange
BS EN 1666:1998 BS EN 1666:1998. Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread
BS EN 1667:1998 BS EN 1667:1998. Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
BS EN 1762:1998 BS EN 1762:1998. Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
BS EN ISO 13397-4:1998 BS EN ISO 13397-4:1998. Periodontal curettes, dental scalers and excavators. Dental excavators. Discoid type
BS EN 1862:1998, BS 2782-12:Method 1209C:1998 BS EN 1862:1998, BS 2782-12:Method 1209C:1998. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment
BS ISO 11093-8:1997 BS ISO 11093-8:1997. Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-7:1997 BS ISO 11093-7:1997. Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN ISO 13819-1:1998 BS EN ISO 13819-1:1998. Petroleum and natural gas industries. Offshore structures. General requirements
BS EN 61847:1998, IEC 61847:1998 BS EN 61847:1998, IEC 61847:1998. Ultrasonics. Surgical systems. Measurement and declaration of the basic output characteristics
BS ISO 199:1997 BS ISO 199:1997. Rolling bearings. Thrust bearings. Tolerances
BS EN 50132-2-1:1998 BS EN 50132-2-1:1998. Alarm systems. CCTV surveillance systems for use in security applications. Black and white cameras
BS ISO 7879:1997 BS ISO 7879:1997. Diesel engines. Cradle mounted in-line fuel injection pumps. Mounting dimensions
BS ISO 4037-2:1997 BS ISO 4037-2:1997. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Dosimetry for radiation protection over the energy ranges 8 keV to 1, 3 MeV and 4 MeV to 9 MeV
BS ISO 7026:1997 BS ISO 7026:1997. Diesel engines. Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'
BS ISO 10889-1:1997 BS ISO 10889-1:1997. Tool holders with cylindrical shank. Cylindrical shank, location bore. Technical delivery conditions
BS ISO 10889-2:1997 BS ISO 10889-2:1997. Tool holders with cylindrical shank. Type A, shanks for tool holders of special designs
BS ISO 10889-3:1997 BS ISO 10889-3:1997. Tool holders with cylindrical shank. Type B with rectangular radial seat
BS ISO 10889-4:1997 BS ISO 10889-4:1997. Tool holders with cylindrical shank. Type C with rectangular axial seat
BS EN 60286-4:1998, IEC 60286-4:1997 BS EN 60286-4:1998, IEC 60286-4:1997. Packaging of components for automatic handling. Stick magazines for electronic components encapsulated in packages of form E and G
BS EN 60286-3:1998, IEC 60286-3:1997 BS EN 60286-3:1998, IEC 60286-3:1997. Packaging of components for automatic handling. Packaging of leadless components on continuous tapes
BS EN 60286-1:1998, IEC 60286-1:1997 BS EN 60286-1:1998, IEC 60286-1:1997. Packaging of components for automatic handling. Tape packaging of components with axial leads on continuous tapes
BS EN 60603-4:1998, IEC 60603-4:1987 BS EN 60603-4:1998, IEC 60603-4:1987. Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing
BS EN 60603-5:1998, IEC 60603-5:1987 BS EN 60603-5:1998, IEC 60603-5:1987. Connectors for frequencies below 3 MHz for use with printed boards. Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing
BS EN 60603-6:1998, IEC 60603-6:1987 BS EN 60603-6:1998, IEC 60603-6:1987. Connectors for frequencies below 3 MHz for use with printed boards. Edge-socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
BS EN 60603-8:1998, IEC 60603-8:1990 BS EN 60603-8:1998, IEC 60603-8:1990. Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm
BS EN 60603-3:1998, IEC 60603-3:1987 BS EN 60603-3:1998, IEC 60603-3:1987. Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
BS EN 60603-9:1998, IEC 60603-9:1990 BS EN 60603-9:1998, IEC 60603-9:1990. Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
BS EN 60603-10:1998, IEC 60603-10:1991 BS EN 60603-10:1998, IEC 60603-10:1991. Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
BS EN 60603-12:1998, IEC 60603-12:1992 BS EN 60603-12:1998, IEC 60603-12:1992. Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
BS EN 60603-13:1998, IEC 60603-13:1995 BS EN 60603-13:1998, IEC 60603-13:1995. Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID)
BS EN 61305-2:1998, IEC 61305-2:1997 BS EN 61305-2:1998, IEC 61305-2:1997. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. FM radio tuners
BS EN 60512-14-7:1998, IEC 60512-14-7:1997 BS EN 60512-14-7:1998, IEC 60512-14-7:1997. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Impacting water
BS EN 166100:1998 BS EN 166100:1998. Harmonized system of quality assessment for electronic components. Sectional specification:surface acoustic wave (SAW) filters
BS EN 61830:1998, IEC 61830:1997 BS EN 61830:1998, IEC 61830:1997. Microwave ferrite components. Measuring methods for major properties
BS EN 60315-4:1998, IEC 60315-4:1997 BS EN 60315-4:1998, IEC 60315-4:1997. Methods of measurement on radio receivers for various classes of emission. Receivers for frequency-modulated sound broadcasting emissions
BS EN 60679-4:1998, IEC 60679-4:1997 BS EN 60679-4:1998, IEC 60679-4:1997. Quartz crystal controlled oscillators of assessed quality. Sectional specification. Capability approval
BS EN 61603-3:1998, IEC 61603-3:1997 BS EN 61603-3:1998, IEC 61603-3:1997. Transmission of audio and/or video and related signals using infra-red radiation. Transmission systems for audio signals for conference and similar systems
BS EN 12263:1999 BS EN 12263:1999. Refrigerating systems and heat pumps. Safety switching devices for limiting the pressure. Requirements and tests
BS ISO 10889-5:1997 BS ISO 10889-5:1997. Tool holders with cylindrical shank. Type D with more than one rectangular seat
BS ISO 10889-8:1997 BS ISO 10889-8:1997. Tool holders with cylindrical shank. Type Z, accessories
BS ISO 10889-7:1997 BS ISO 10889-7:1997. Tool holders with cylindrical shank. Type F with taper seat
BS ISO 10889-6:1997 BS ISO 10889-6:1997. Tool holders with cylindrical shank. Type E with cylindrical seat
BS EN 12149:1998 BS EN 12149:1998. Wallcoverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release
BS AU 50-1.0d:1998 BS AU 50-1.0d:1998. Tyres and wheels. Tyres. General
BS EN ISO 10253:1998, BS 6068-5.22:1998 BS EN ISO 10253:1998, BS 6068-5.22:1998. Water quality. Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum
DD ENV 12875-1:1998 DD ENV 12875-1:1998. Mechanical dishwashing resistance of domestic utensils. Reference test method
BS EN 1875-3:1998 BS EN 1875-3:1998. Rubber and plastics-coated fabrics. Determination of tear strength. Trapezoidal method
BS EN 1876-2:1998 BS EN 1876-2:1998. Rubber- or plastics-coated fabrics. Low temperature tests. Impact test on loop
BS ISO 5025:1997 BS ISO 5025:1997. Reinforcement products. Woven fabrics. Determination of width and length
BS ISO 11480:1997 BS ISO 11480:1997. Pulp, paper and board. Determination of total chlorine and organically bound chlorine
BS ISO 5350-3:1997 BS ISO 5350-3:1997. Pulps. Estimation of dirt and shives. Inspection by reflected light
BS EN ISO 6800:1998, BS 684-2.39:1998 BS EN ISO 6800:1998, BS 684-2.39:1998. Animal and vegetable fats and oils. Determination of the composition of fatty acids in the 2-position of the triglyceride molecules
BS ISO/IEC 13247:1997 BS ISO/IEC 13247:1997. Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Basic call/connection control
BS ISO/IEC 15772:1998 BS ISO/IEC 15772:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Common information additional network feature
BS ISO/IEC TR 11802-5:1997 BS ISO/IEC TR 11802-5:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines. Media access control (MAC) bridging of Ethernet V2.0 in Local Area Networks
BS ISO/IEC 13246:1997 BS ISO/IEC 13246:1997. Information technology. Telecommunications and information exchange between systems. Broadband private integrated services network. Inter-exchange signalling protocol. Signalling ATM adaptation layer
BS ISO/IEC 14474:1998 BS ISO/IEC 14474:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Functional requirements for static circuit-mode inter-PINX connections
BS EN 936:1998 BS EN 936:1998. Chemicals used for treatment of water intended for human consumption. Carbon dioxide
BS EN 12305:1998 BS EN 12305:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified plants
BS EN 12307:1998 BS EN 12307:1998. Biotechnology. Large-scale process and production. Guidance for good practice, procedures, training and control for personnel
BS EN 12306:1998 BS EN 12306:1998. Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
BS EN 12167:1998 BS EN 12167:1998. Copper and copper alloys. Profiles and rectangular bar for general purposes
BS EN 12166:1998 BS EN 12166:1998. Copper and copper alloys. Wire for general purposes
BS EN 12163:1998 BS EN 12163:1998. Copper and copper alloys. Rod for general purposes
BS EN 12165:1998 BS EN 12165:1998. Copper and copper alloys. Wrought and unwrought forging stock
BS ISO 12636:1998 BS ISO 12636:1998. Graphic technology. Blankets for offset printing
BS ISO 1361:1997 BS ISO 1361:1997. Light-gauge metal containers. Round open-top cans. Internal diameters
BS EN 1795:1998 BS EN 1795:1998. Transportable gas cylinders (excluding LPG). Procedures for change of gas service
BS ISO 7790:1997 BS ISO 7790:1997. Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions
BS ISO 11158:1997 BS ISO 11158:1997. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG
BS EN 12280-1:1998 BS EN 12280-1:1998. Rubber- or plastics-coated fabrics. Accelerated ageing tests. Heat ageing
BS EN 480-12:1998 BS EN 480-12:1998. Admixtures for concrete, mortar and grout. Test methods. Determination of the alkali content of admixtures
BS 7723-6:1998, ISO/TR 7507-6:1997 BS 7723-6:1998, ISO/TR 7507-6:1997. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Recommendations for monitoring, checking and verification of tank calibration and capacity table
BS ISO 10762:1997 BS ISO 10762:1997. Hydraulic fluid power. Cylinder mounting dimensions. 10 MPa (100 bar) series
BS ISO 13591:1997 BS ISO 13591:1997. Small craft. Portable fuel systems for outboard motors
BS G 257-2:1998 BS G 257-2:1998. Design of electromagnetic hazard protection of civil aircraft. Guide to protection
BS 6336:1998 BS 6336:1998. Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment
BS EN 1988-2:1998 BS EN 1988-2:1998. Foodstuffs. Determination of sulfite. Enzymatic method
BS EN 1988-1:1998 BS EN 1988-1:1998. Foodstuffs. Determination of sulfite. Optimized Monier-Williams method
BS ISO 12103-2:1997 BS ISO 12103-2:1997. Road vehicles. Test dust for filter evaluation. Aluminium oxide test dust
BS ISO 12103-1:1997 BS ISO 12103-1:1997. Road vehicles. Test dust for filter evaluation. Arizona test dust
BS 7121-11:1998 BS 7121-11:1998. Code of practice for safe use of cranes. Offshore cranes
BS EN 1193:1998 BS EN 1193:1998. Timber structures. Structural timber and glued laminated timber. Determination of shear strength and mechanical properties perpendicular to the grain
BS EN ISO 3166-1:1998 BS EN ISO 3166-1:1998. Codes for the representation of names of countries and their subdivisions. Country codes
BS EN ISO 13000-2:1998 BS EN ISO 13000-2:1998. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Preparation of test specimens and determination of properties
BS EN ISO 13000-1:1998 BS EN ISO 13000-1:1998. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation
BS EN 480-1:1998 BS EN 480-1:1998. Admixtures for concrete, mortar and grout. Test methods. Reference concrete and reference mortar for testing
BS EN ISO 1561:1998 BS EN ISO 1561:1998. Dental casting wax
BS EN 1095:1998 BS EN 1095:1998. Deck safety harness and safety line for use on recreational craft. Safety requirements and test methods
BS ISO/TR 14697:1997 BS ISO/TR 14697:1997. Fire tests. Guidance on the choice of substrates for building products
BS EN 934-2:1998 BS EN 934-2:1998. Admixtures for concrete, mortar and grout. Concrete admixtures. Definitions and requirements
BS ISO/IEC 9496:1995 BS ISO/IEC 9496:1995. CCITT high level language (CHILL)
BS EN 866-2:1998 BS EN 866-2:1998. Biological systems for testing sterilizers and sterilization processes. Particular systems for use in ethylene oxide sterilizers
BS ISO TR 5925-2:1997 BS ISO TR 5925-2:1997. Fire tests. Smoke control door and shutter assemblies. Commentary on test method and test data application
BS EN 45510-5-1:1998 BS EN 45510-5-1:1998. Guide for the procurement of power station equipment. Steam turbines
BS EN 45510-5-2:1998 BS EN 45510-5-2:1998. Guide for the procurement of power station equipment. Gas turbines
BS EN 45510-5-3:1998 BS EN 45510-5-3:1998. Guide for the procurement of power station equipment. Wind turbines
BS EN 45510-6-2:1998 BS EN 45510-6-2:1998. Guide for the procurement of power station equipment. Turbine auxiliaries. Feedwater heaters
BS EN 45510-6-3:1998 BS EN 45510-6-3:1998. Guide for the procurement of power station equipment. Turbine auxiliaries. Condenser plant
BS EN 45510-6-7:1998 BS EN 45510-6-7:1998. Guide for the procurement of power station equipment. Turbine auxiliaries. Moisture separator reheaters
BS IEC 60747-12-3:1998 BS IEC 60747-12-3:1998. Discrete semiconductor devices and integrated circuits. Optoelectronic devices. Blank detail specification for light-emitting diodes (LEDs) for display applications
BS EN 160100:1998 BS EN 160100:1998. Harmonized system of quality assessment for electronic components. Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality
BS EN 12323:1998 BS EN 12323:1998. Bar coding. Symbology specifications. "Code 16K"
BS ISO/IEC 8859-13:1998 BS ISO/IEC 8859-13:1998. Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 7
BS ISO/IEC 8859-10:1998 BS ISO/IEC 8859-10:1998. Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 6
BS ISO/IEC 8859-9:1999 BS ISO/IEC 8859-9:1999. Latin alphabet No. 5
BS ISO/IEC 8859-6:1999 BS ISO/IEC 8859-6:1999. Information technology. 8-bit single-byte coded graphic character sets. Latin/Arabic alphabet
BS ISO/IEC 8859-5:1999 BS ISO/IEC 8859-5:1999. Information technology. 8-bit single-byte coded graphic character sets. Latin/Cyrillic alphabet
BS ISO/IEC 8859-4:1998 BS ISO/IEC 8859-4:1998. Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 4
BS ISO/IEC 8859-3:1999 BS ISO/IEC 8859-3:1999. Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 3
BS ISO/IEC 8859-2:1999 BS ISO/IEC 8859-2:1999. Latin alphabet No. 2
BS ISO/IEC 8859-1:1998 BS ISO/IEC 8859-1:1998. Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 1
BS ISO 1803:1997 BS ISO 1803:1997. Building construction. Tolerances. Expression of dimensional accuracy. Principles and terminology
BS EN 1170-5:1998 BS EN 1170-5:1998. Precast concrete products. Test method for glass-fibre reinforced cement. Measuring bending strength, "complete bending test" method
BS EN 1170-6:1998 BS EN 1170-6:1998. Precast concrete products. Test method for glass-fibre reinforced cement. Determination of the absorption of water by immersion and determination of the dry density
BS EN 1170-7:1998 BS EN 1170-7:1998. Precast concrete products. Test method for glass-fibre reinforced cement. Measurement of extremes of dimensional variations due to moisture content
BS EN 60309-2:1998, IEC 60309-2:1997 BS EN 60309-2:1998, IEC 60309-2:1997. Plugs, socket-outlets and couplers for industrial purposes. Dimensional interchangeability requirements for pin and contact-tube accessories
BS EN 60309-1:1998, IEC 60309-1:1997 BS EN 60309-1:1998, IEC 60309-1:1997. Plugs, socket-outlets and couplers for industrial purposes. General requirements
BS EN 1815:1998 BS EN 1815:1998. Resilient and textile floor coverings. Assessment of static electrical propensity
BS EN 1814:1998 BS EN 1814:1998. Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
BS EN ISO 7785-2:1998 BS EN ISO 7785-2:1998. Dental handpieces. Straight and geared angle handpieces
BS 7799-2:1998 BS 7799-2:1998. Information security management. Specification for information security management systems
BS 7874:1998 BS 7874:1998. Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
BS 7900:1998 BS 7900:1998. Specification for examination of the surface texture of precision steel castings
BS EN 60214:1998 BS EN 60214:1998. On-load tap-changers
BS 7844-3:1998 BS 7844-3:1998. Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating of a transformer loaded with non-sinusoidal current
BS 7821-2.2:1998 BS 7821-2.2:1998. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high voltage and/or low voltage side. Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1
BS IEC 60076-8:1997, IEC 60076-8:1997 BS IEC 60076-8:1997, IEC 60076-8:1997. Power transformers. Application guide
BS ISO/IEC 14977:1996 BS ISO/IEC 14977:1996. Information technology. Syntactic Metalanguage. Extended BNF
DD ENV 12925:1998 DD ENV 12925:1998. Bar coding. Symbology specifications. 'PDF417'
DD ENV 1402-6:1998 DD ENV 1402-6:1998. Unshaped refractory products. Measurement of physical properties
BS EN 1170-4:1998 BS EN 1170-4:1998. Precast concrete products. Test method for glass-fibre reinforced cement. Measuring bending strength. 'Simplified bending test' method
BS ISO 6051:1997 BS ISO 6051:1997. Photography. Processed reflection prints. Storage practices
BS 5873-5:1998 BS 5873-5:1998. Educational furniture. Specification for security of fixed secure storage furniture for educational institutions
BS EN 1170-1:1998 BS EN 1170-1:1998. Precast concrete products. Test method for glass-fibre reinforced cement. Measuring the consistency of the matrix. 'Slump test' method
BS EN 1170-3:1998 BS EN 1170-3:1998. Precast concrete products. Test method for glass-fibre reinforced cement. Measuring the fibre content of sprayed GRC
BS EN 1170-2:1998 BS EN 1170-2:1998. Precast concrete products. Test method for glass-fibre reinforced cement. Measuring the fibre content in fresh GRC, 'Wash out test'
DD ENV 1094-3:1998 DD ENV 1094-3:1998. Insulating refractory products. Classification of ceramic fibre products
BS ISO 4115:1997 BS ISO 4115:1997. Air cargo equipment. Air/land pallet nets
BS ISO 14615:1997 BS ISO 14615:1997. Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
BS EN ISO 8030:1998 BS EN ISO 8030:1998. Rubber and plastics hoses. Method of test for flammability
BS EN 1073-1:1998 BS EN 1073-1:1998. Protective clothing against radioactive contamination. Requirements and test methods for ventilated protective clothing against particulate radioactive contamination
BS EN 1621-1:1998 BS EN 1621-1:1998. Motorcyclists' protective clothing against mechanical impact. Requirements and test methods for impact protectors
BS 2782-11:Method 1150B:1998, ISO 11414:1996 BS 2782-11:Method 1150B:1998, ISO 11414:1996. Methods of testing plastics. Thermoplastics pipes, fittings and valves. Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS EN 1316-3:1998 BS EN 1316-3:1998. Hardwood round timber. Qualitative classification. Ash and maples and sycamore
BS 5576:1998 BS 5576:1998. Specification for fire safety features of camping tents, awnings, trailer tents and caravan awnings
BS AU 50-1.4.8:1998, ISO 11795:1997 BS AU 50-1.4.8:1998, ISO 11795:1997. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Method of measuring tyre rolling circumference for agricultural tractor drive wheels
BS 6068-1.9:1998, ISO 6107-9:1997 BS 6068-1.9:1998, ISO 6107-9:1997. Water quality. Glossary. Alphabetical list and subject index
BS EN 131701:1998 BS EN 131701:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric. Assessment level E
BS EN 131702:1998 BS EN 131702:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric. Assessment level EZ
BS ISO 8584-1:1990, BS 2782-11:Methods 1160A & B BS ISO 8584-1:1990, BS 2782-11:Methods 1160A & B. Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress. Polyolefin pipes
BS 7012-1:1998, ISO 8039:1997 BS 7012-1:1998, ISO 8039:1997. Light microscopes. Specification for the magnifying power of microscope imaging components
BS EN ISO 10545-5:1998 BS EN ISO 10545-5:1998. Ceramic tiles. Determination of impact resistance by measurement of coefficient of restitution
BS ISO 7197:1997 BS ISO 7197:1997. Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components
BS EN 10267:1998 BS EN 10267:1998. Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
BS 6911-13:1998, ISO 6016:1998 BS 6911-13:1998, ISO 6016:1998. Testing earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
BS ISO TR 8363:1997 BS ISO TR 8363:1997. Measurement of liquid flow in open channels. General guidelines for the selection of method
BS ISO 3057:1998 BS ISO 3057:1998. Non-destructive testing. Metallographic replica techniques of surface examination
BS ISO 3058:1998 BS ISO 3058:1998. Non-destructive testing. Aids to visual inspection. Selection of low-power magnifiers
DD ENV 12498:1998 DD ENV 12498:1998. Paper and board intended to come into contact with foodstuffs. Determination of cadmium, lead and chromium in an aqueous extract
BS EN 1760-1:1998 BS EN 1760-1:1998. Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
BS 7011-3.2:1998, ISO 8255-2:1997 BS 7011-3.2:1998, ISO 8255-2:1997. Consumable accessories for light microscopes. Cover glasses. Specification for materials and quality of finish
BS 6708:1998 BS 6708:1998. Flexible cables for use at mines and quarries
BS ISO/IEC 14772-1:1997 BS ISO/IEC 14772-1:1997. Information technology. Computer graphics and image processing. The Virtual Reality Modelling Language. Functional specification and UTF-8 encoding
BS EN 525:1998 BS EN 525:1998. Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
PD 6619:1998 PD 6619:1998. Copper and copper alloys. Provisions and procedures for the allocation of material numbers and registration of materials
BS EN ISO 10993-1:1998 BS EN ISO 10993-1:1998. Biological evaluation of medical devices. Evaluation and testing
BS EN ISO 11960:1998 BS EN ISO 11960:1998. Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN 1987-3:1998 BS EN 1987-3:1998. Electrically propelled road vehicles. Specific requirements for safety. Protection of users against electrical hazards
BS EN 752-5:1998 BS EN 752-5:1998. Drain and sewer systems outside buildings. Rehabilitation
BS EN 12176:1998 BS EN 12176:1998. Characterization of sludge. Determination of pH value
BS 5766-4:1998, ISO 5983:1997 BS 5766-4:1998, ISO 5983:1997. Methods for analysis of animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content
BS EN 50229:1998 BS EN 50229:1998. Electric clothes washer-dryers for household use. Methods of measuring the performance
BS EN 1175-3:1998 BS EN 1175-3:1998. Safety of industrial trucks. Electrical requirements. Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
BS EN 1175-2:1998 BS EN 1175-2:1998. Safety of industrial trucks. Electrical requirements. General requirements for internal combustion engine powered trucks
BS EN 1175-1:1998 BS EN 1175-1:1998. Safety of industrial trucks. Electrical requirements. General requirements for battery powered trucks
BS EN 1127-1:1998 BS EN 1127-1:1998. Explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology
BS ISO 4433-2:1997, BS 2782-11:Method 1161B:1998 BS ISO 4433-2:1997, BS 2782-11:Method 1161B:1998. Thermoplastics pipes. Resistance to liquid chemicals. Classification. Polyolefin pipes
BS ISO 4433-3:1997, BS 2782-11:Method 1161C:1998 BS ISO 4433-3:1997, BS 2782-11:Method 1161C:1998. Thermoplastic pipes. Resistance to liquid chemicals. Classification. Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes
BS ISO 4433-1:1997, BS 2782-11:Method 1161A:1998 BS ISO 4433-1:1997, BS 2782-11:Method 1161A:1998. Thermoplastic pipes. Resistance to liquid chemicals. Classification. Immersion test method
BS EN ISO 13783:1998, BS 2782-11:Method 1123C:1998 BS EN ISO 13783:1998, BS 2782-11:Method 1123C:1998. Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure
BS EN 12127:1998 BS EN 12127:1998. Textiles. Fabrics. Determination of mass per unit area using small samples
BS EN 497:1998 BS EN 497:1998. Specification for dedicated liquefied petroleum gas appliances. Multi-purpose boiling burners for outdoor use
BS EN 977:1998 BS EN 977:1998. Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids
BS EN 10208-1:1998 BS EN 10208-1:1998. Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
BS G 257-1:1998 BS G 257-1:1998. Design of electromagnetic hazard protection of civil aircraft. Guide to theory and threats
BS ISO 10110-8:1997 BS ISO 10110-8:1997. Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface texture
BS 4585-9:1998, ISO 930:1997 BS 4585-9:1998, ISO 930:1997. Methods of test for spices and condiments. Determination of acid-insoluble ash
BS EN 12055:1998 BS EN 12055:1998. Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements
PD 6620:1998 PD 6620:1998. Mains communications systems. Protocol and data integrity and interfaces
BS EN 1227:1998, BS 2782-12:Method 1214F:1998 BS EN 1227:1998, BS 2782-12:Method 1214F:1998. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions
BS EN ISO 4320:1998 BS EN ISO 4320:1998. Non-ionic surface active agents. Determination of cloud point index. Volumetric method
BS EN 1725:1998 BS EN 1725:1998. Domestic furniture. Beds and mattresses. Safety requirements and test methods
BS EN 1813:1998 BS EN 1813:1998. Textile floor coverings. Determination of wool fibre integrity using an abrasion machine
BS EN 1470:1998 BS EN 1470:1998. Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings
BS EN 1963:1998 BS EN 1963:1998. Textile floor coverings. Tests using the Lisson Tretrad machine
BS EN 130102:1998 BS EN 130102:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. Assessment level EZ
BS EN 130101:1998 BS EN 130101:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. Assessment level E
BS EN 130100:1998 BS EN 130100:1998. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current
BS EN 61196-3-2:1998, IEC 61196-3-2:1997 BS EN 61196-3-2:1998, IEC 61196-3-2:1997. Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 61196-3-3:1998, IEC 61196-3-3:1997 BS EN 61196-3-3:1998, IEC 61196-3-3:1997. Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 60966-2-4:1998, IEC 60966-2-4:1997 BS EN 60966-2-4:1998, IEC 60966-2-4:1997. Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers
BS EN 2133:1998 BS EN 2133:1998. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys
BS EN ISO 3098-5:1998 BS EN ISO 3098-5:1998. Technical product documentation. Lettering. CAD lettering of the Latin alphabet, numerals and marks
BS EN ISO 3098-0:1998 BS EN ISO 3098-0:1998. Technical product documentation. Lettering. General requirements
BS ISO/IEC TR 11802-1:1997 BS ISO/IEC TR 11802-1:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines. The structure and coding of Logical Link Control addresses in Local Area Networks
BS EN 12117:1998, BS 2782-11:Method 1121G:1998 BS EN 12117:1998, BS 2782-11:Method 1121G:1998. Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships
BS EN 12118:1998, BS 2782-11:Method 1103C:1998 BS EN 12118:1998, BS 2782-11:Method 1103C:1998. Plastics piping systems. Determination of moisture content in thermoplastics by coulometry
BS EN 12107:1998, BS 2782-11:Method 1121F:1997 BS EN 12107:1998, BS 2782-11:Method 1121F:1997. Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
BS EN 12106:1998, BS 2782-11:Method 1127C:1998 BS EN 12106:1998, BS 2782-11:Method 1127C:1998. Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off
BS EN 12100:1998, BS 2782-11:Method 1133D:1997 BS EN 12100:1998, BS 2782-11:Method 1133D:1997. Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
BS ISO/IEC 10021-6:1996 BS ISO/IEC 10021-6:1996. Information technology. Message handling systems (MHS). Protocol specifications
BS EN 50205:1998 BS EN 50205:1998. Relays with forcibly guided (linked) contacts
BS EN 1819:1998 BS EN 1819:1998. Laryngoscopes for tracheal intubation. Particular requirements
BS EN ISO 6507-1:1998 BS EN ISO 6507-1:1998. Metallic materials. Vickers hardness test. Test method
BS 6049-8:1998, ISO 11286:1997 BS 6049-8:1998, ISO 11286:1997. Methods of test for tea. Classification of grades by particle size analysis
BS EN 12066:1998 BS EN 12066:1998. Installations and equipment for liquefied natural gas. Testing of insulating linings for liquefied natural gas impounding areas
BS EN 2591-304:1998 BS EN 2591-304:1998. Elements of electrical and optical connection. Test methods. Damp heat steady state
BS EN 2591-305:1998 BS EN 2591-305:1998. Elements of electrical and optical connection. Test methods. Rapid change of temperature
BS EN 2591-309:1998 BS EN 2591-309:1998. Elements of electrical and optical connection. Test methods. Dry heat
BS EN 2591-312:1998 BS EN 2591-312:1998. Elements of electrical and optical connection. Test methods. Air leakage
BS EN 2591-314:1998 BS EN 2591-314:1998. Elements of electrical and optical connection. Test methods. Immersion at low air pressure
BS EN 61440:1998, IEC 61440:1997 BS EN 61440:1998, IEC 61440:1997. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium small prismatic rechargeable single cells
BS 7403-11:1998, ISO 4548-11:1997 BS 7403-11:1998, ISO 4548-11:1997. Full-flow lubricating oil filters for internal combustion engines. Methods of test for self-cleaning filters
BS EN ISO 14129:1998 BS EN ISO 14129:1998. Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method
BS EN 12824:1998 BS EN 12824:1998. Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Salmonella
BS EN 61300-3-39:1998, IEC 61300-3-39:1997 BS EN 61300-3-39:1998, IEC 61300-3-39:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. PC optical connector reference plug selection
BS EN 1765:1998 BS EN 1765:1998. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS EN 828:1998 BS EN 828:1998. Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
BS EN 12002:1998 BS EN 12002:1998. Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
BS EN 12003:1998 BS EN 12003:1998. Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives
BS EN 1177:1998 BS EN 1177:1998. Impact absorbing playground surfacing. Safety requirements and test methods
BS EN 71-1:1998 BS EN 71-1:1998. Safety of toys. Mechanical and physical properties
BS 7871-2:1998 BS 7871-2:1998. Pneumatic conveying. Glossary of equipment
BS ISO 7720:1997 BS ISO 7720:1997. Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
BS EN 60672-3:1998, IEC 60672-3:1997 BS EN 60672-3:1998, IEC 60672-3:1997. Ceramic and glass insulating materials. Specifications for individual materials
BS EN 869:1998 BS EN 869:1998. Safety requirements for high pressure metal diecasting units
BS EN 12133:1998 BS EN 12133:1998. Fruit and vegetable juices. Determination of chloride content. Potentiometric titration method
BS EN 12134:1998 BS EN 12134:1998. Fruit and vegetable juices. Determination of centrifugable pulp content
BS EN 1254-3:1998 BS EN 1254-3:1998. Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with plastics pipes
BS EN 1254-2:1998 BS EN 1254-2:1998. Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with copper tubes
BS EN ISO 3386-1:1998 BS EN ISO 3386-1:1998. Polymeric materials, cellular flexible. Determination of stress-strain characteristic in compression. Low-density materials
BS 7371-8:1998 BS 7371-8:1998. Coatings on metal fasteners. Specification for sherardized coatings
BS EN 12135:1998 BS EN 12135:1998. Fruit and vegetable juices. Determination of nitrogen content. Kjeldahl method
BS EN 1337-9:1998 BS EN 1337-9:1998. Structural bearings. Protection
BS EN 1337-11:1998 BS EN 1337-11:1998. Structural bearings. Transport, storage and installation
BS EN 12065:1998 BS EN 12065:1998. Installations and equipment for liquefied natural gas. Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
BS EN 498:1998 BS EN 498:1998. Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use
BS 6911-12:1998, ISO 7457:1997 BS 6911-12:1998, ISO 7457:1997. Testing earth-moving machinery. Determination of turning dimensions of wheeled machines
BS 7904:1998 BS 7904:1998. Guide to smoke measurement units. Their basis and use in smoke opacity test methods
BS 6914-10:1998, ISO 7131:1997 BS 6914-10:1998, ISO 7131:1997. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for loaders
BS EN 26360-2:1998 BS EN 26360-2:1998. Dentistry. Dental rotary instruments. Number coding system. Shape and specific characteristics
BS 7442-3.1:1998, ISO 7267-1:1997 BS 7442-3.1:1998, ISO 7267-1:1997. Rubber or plastics covered rollers. Method of test. Determination of apparent hardness (IRHD method)
BS EN 45010:1998 BS EN 45010:1998. General requirements for assessment and accreditation of certification systems
BS EN 45012:1998 BS EN 45012:1998. General requirements for bodies operating assessment and certification/registration of quality systems
BS EN 45011:1998 BS EN 45011:1998. General requirements for bodies operating product certification systems
BS EN 10223-1:1998 BS EN 10223-1:1998. Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
BS EN 10223-3:1998 BS EN 10223-3:1998. Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes
BS IEC 60300-3-6:1997 BS IEC 60300-3-6:1997. Dependability management. Application guide. Software aspects of dependability
BS ISO 12775:1997 BS ISO 12775:1997. Guidelines on types of glass of normal bulk-production composition and their test methods
BS EN 12137:1998 BS EN 12137:1998. Fruit and vegetable juices. Determination of tartaric acid in grape juices. Method by high performance liquid chromatography
BS ISO 4659:1997 BS ISO 4659:1997. Rubber, styrene-butadiene (carbon or carbon black and oil masterbatches). Evaluation procedure
BS 5381-4:1998, ISO 2965:1997 BS 5381-4:1998, ISO 2965:1997. Methods for determination of physical properties of tobacco and tobacco products. Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper
BS EN 60669-2-2:1998, IEC 60669-2-2:1996 BS EN 60669-2-2:1998, IEC 60669-2-2:1996. Switches for household and similar fixed electrical installations. Particular requirements. Remote-control switches (RCS)
BS EN ISO 8734:1998 BS EN ISO 8734:1998. Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)
BS EN ISO 8735:1998 BS EN ISO 8735:1998. Parallel pins with internal thread, of hardened steel or martensitic stainless steel
BS EN ISO 8739:1998 BS EN ISO 8739:1998. Grooved pins. Full-length parallel grooved, with pilot
BS EN ISO 8740:1998 BS EN ISO 8740:1998. Grooved pins. Full-length parallel grooved, with chamfer
DD ENV 12447:1998 DD ENV 12447:1998. Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis
BS EN ISO 1666:1998 BS EN ISO 1666:1998. Starch. Determination of moisture content. Oven-drying method
BS EN ISO 7719:1998 BS EN ISO 7719:1998. Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10
BS EN ISO 7040:1998 BS EN ISO 7040:1998. Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10
BS EN ISO 10642:1998 BS EN ISO 10642:1998. Hexagon socket countersunk head screws
BS EN ISO 7380:1998 BS EN ISO 7380:1998. Hexagon socket button head screws
BS EN ISO 4762:1998 BS EN ISO 4762:1998. Hexagon socket head cap screws
BS EN ISO 10513:1998 BS EN ISO 10513:1998. Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread. Property classes 8, 10 and 12
BS EN ISO 7042:1998 BS EN ISO 7042:1998. Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10 and 12
BS EN ISO 2338:1998 BS EN ISO 2338:1998. Parallel pins of unhardened steel and austenitic stainless steel
BS EN ISO 1234:1998 BS EN ISO 1234:1998. Split pins
BS EN ISO 3506-3:1998 BS EN ISO 3506-3:1998. Mechanical properties of corrosion-resistant stainless-steel fasteners. Set screws and similar fasteners not under tensile stress
BS EN ISO 3506-2:1998 BS EN ISO 3506-2:1998. Mechanical properties of corrosion-resistant stainless-steel fasteners. Nuts
BS EN ISO 3506-1:1998 BS EN ISO 3506-1:1998. Mechanical properties of corrosion-resistant stainless-steel fasteners. Bolts, screws and studs
BS EN ISO 8733:1998 BS EN ISO 8733:1998. Parallel pins with internal thread, of unhardened steel or austenitic stainless steel
BS EN ISO 10512:1998 BS EN ISO 10512:1998. Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread. Property classes 6, 8 and 10
BS EN ISO 10511:1998 BS EN ISO 10511:1998. Prevailing torque type hexagon thin nuts (with non-metallic insert)
BS EN 1648-2:1998 BS EN 1648-2:1998. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans
BS EN 1648-1:1998 BS EN 1648-1:1998. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans
BS EN 1748-2:1998 BS EN 1748-2:1998. Glass in building. Glass ceramics
BS EN 1793-3:1998 BS EN 1793-3:1998. Road traffic noise reducing devices. Test method for determining the acoustic performance. Normalized traffic noise spectrum
BS EN 1793-2:1998 BS EN 1793-2:1998. Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of airborne sound insulation
BS EN 12136:1998 BS EN 12136:1998. Fruit and vegetable juices. Determination of total carotenoid content and individual carotenoid fractions
DD ENV 12018:1998 DD ENV 12018:1998. Identification, administrative, and common clinical data structure for intermittently connected devices used in healthcare (including machine readable cards)
DD ENV 12017:1998 DD ENV 12017:1998. Medical informatics. Medical informatics vocabulary (MIVoc)
BS EN ISO 8751:1998 BS EN ISO 8751:1998. Spring-type straight pins. Coiled, light duty
BS EN ISO 8741:1998 BS EN ISO 8741:1998. Grooved pins. Half-length reverse-taper grooved
BS EN ISO 8748:1998 BS EN ISO 8748:1998. Spring-type straight pins. Coiled, heavy duty
BS EN ISO 8750:1998 BS EN ISO 8750:1998. Spring-type straight pins. Coiled, standard duty
BS EN ISO 8752:1998 BS EN ISO 8752:1998. Spring-type straight pins. Slotted, heavy duty
BS EN ISO 8743:1998 BS EN ISO 8743:1998. Grooved pins. Half-length centre grooved
BS EN ISO 8742:1998 BS EN ISO 8742:1998. Grooved pins. One-third-length centre grooved
BS EN ISO 8744:1998 BS EN ISO 8744:1998. Grooved pins. Full-length taper grooved
BS EN ISO 13337:1998 BS EN ISO 13337:1998. Spring-type straight pins. Slotted, light duty
BS EN ISO 8745:1998 BS EN ISO 8745:1998. Grooved pins. Half-length taper grooved
BS EN ISO 8746:1998 BS EN ISO 8746:1998. Grooved pins with round head
BS EN ISO 8747:1998 BS EN ISO 8747:1998. Grooved pins with countersunk head
BS EN 1809:1998 BS EN 1809:1998. Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods
BS EN 1212:1998 BS EN 1212:1998. Chemicals used for treatment of water intended for human consumption. Sodium polyphosphate
BS EN 1211:1998 BS EN 1211:1998. Chemicals used for treatment of water intended for human consumption. Potassium tripolyphosphate
BS EN 1210:1998 BS EN 1210:1998. Chemicals used for treatment of water intended for human consumption. Sodium tripolyphosphate
BS EN 1209:1998 BS EN 1209:1998. Chemicals used for treatment of water intended for human consumption. Sodium silicate
BS EN 1208:1998 BS EN 1208:1998. Chemicals used for treatment of water intended for human consumption. Sodium calcium polyphosphate
BS EN 1207:1998 BS EN 1207:1998. Chemicals used for treatment of water intended for human consumption. Tetrapotassium pyrophosphate
BS EN 1206:1998 BS EN 1206:1998. Chemicals used for treatment of water intended for human consumption. Tetrasodium pyrophosphate
BS EN 1205:1998 BS EN 1205:1998. Chemicals used for treatment of water intended for human consumption. Sodium acid pyrophosphate
BS EN 1204:1998 BS EN 1204:1998. Chemicals used for treatment of water intended for human consumption. Monocalcium phosphate
BS EN 1203:1998 BS EN 1203:1998. Chemicals used for treatment of water intended for human consumption. Tripotassium orthophosphate
BS EN 1202:1998 BS EN 1202:1998. Chemicals used for treatment of water intended for human consumption. Dipotassium hydrogen orthophosphate
BS EN 1201:1998 BS EN 1201:1998. Chemicals used for treatment of water intended for human consumption. Monopotassium dihydrogen orthophosphate
BS EN 1200:1998 BS EN 1200:1998. Chemicals used for treatment of water intended for human consumption. Trisodium orthophosphate
BS EN 1199:1998 BS EN 1199:1998. Chemicals used for treatment of water intended for human consumption. Disodium hydrogen orthophosphate
BS EN 1198:1998 BS EN 1198:1998. Chemicals used for treatment of water intended for human consumption. Sodium dihydrogen orthophosphate
BS EN ISO 11885:1998, BS 6068-2.60:1998 BS EN ISO 11885:1998, BS 6068-2.60:1998. Water quality. Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
BS ISO 12156-1:1997 BS ISO 12156-1:1997. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
BS 7825-3.9:1998 BS 7825-3.9:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Flammability characteristics
BS ISO 12639:1998 BS ISO 12639:1998. Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)
BS 6200-3.5.3:1998, ISO 13900:1997 BS 6200-3.5.3:1998, ISO 13900:1997. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boron. Curcumin spectrophotometric method after distillation
BS EN 1748-1:1998 BS EN 1748-1:1998. Glass in building. Borosilicate glasses
BS EN 1592-1:1998 BS EN 1592-1:1998. Aluminium and aluminium alloys. HF seam welded tubes. Technical conditions for inspection and delivery
DD ENV 12908:1998 DD ENV 12908:1998. Lead and lead alloys. Analysis by optical emission spectrometry (OES) with spark excitation
BS EN 1505:1998 BS EN 1505:1998. Ventilation for buildings. Sheet metal air ducts and fittings with rectangular cross-section. Dimensions
BS EN 1506:1998 BS EN 1506:1998. Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions
BS EN 12829:1998 BS EN 12829:1998. Surface active agents. Preparation of water with known calcium hardness
BS EN 1418:1998 BS EN 1418:1998. Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
BS EN 61234-2:1998, IEC 61234-2:1997 BS EN 61234-2:1998, IEC 61234-2:1997. Method of test for hydrolytic stability of electrical insulating materials. Moulded thermosets
BS EN 61621:1997, IEC 61621:1997 BS EN 61621:1997, IEC 61621:1997. Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
DD ENV 1257-2:1998 DD ENV 1257-2:1998. Identification card systems.Rules for personal identification number (PIN) handling in intersector environments. PIN protection
BS EN 60335-2-44:1998 BS EN 60335-2-44:1998. Specification for safety of household and similar electrical appliances. Particular requirements. Ironers
BS 5873-4:1998 BS 5873-4:1998. Educational furniture. Specification for strength and stability of storage furniture for educational institutions
BS EN ISO 14602:1998 BS EN ISO 14602:1998. Non-active surgical implants. Implants for osteosynthesis. Particular requirements
DD ENV 12896:1998 DD ENV 12896:1998. Road transport and traffic telematics. Public transport. Reference data model
BS EN 1264-3:1998 BS EN 1264-3:1998. Floor heating. Systems and components. Floor heating. Systems and components. Dimensioning
DD ENV 12923-1:1998 DD ENV 12923-1:1998. Advanced technical ceramics. Monolithic ceramics. General practice for undertaking corrosion tests
BS EN ISO 4597-1:1998 BS EN ISO 4597-1:1998. Plastics. Hardeners and accelerators for epoxide resins. Designation
BS EN ISO 584:1998 BS EN ISO 584:1998. Plastics. Unsaturated polyester resins. Determination of reactivity at 80 °C (conventional method)
BS EN 837-3:1998 BS EN 837-3:1998. Pressure gauges. Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing
BS EN 837-2:1998 BS EN 837-2:1998. Pressure gauges. Selection and installation recommendations for pressure gauges
BS EN 837-1:1998 BS EN 837-1:1998. Pressure gauges. Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing
BS EN 61237-4:1998, IEC 61237-4:1997 BS EN 61237-4:1998, IEC 61237-4:1997. Broadcast video tape recorders. Methods of measurement. Analogue audio performance measurements
BS EN 165000-5:1998 BS EN 165000-5:1998. Film and hybrid integrated circuits. Procedure for qualification approval
BS EN 61337-1-1:1998, IEC 61337-1-1:1995 BS EN 61337-1-1:1998, IEC 61337-1-1:1995. Filters using waveguide type dielectric resonators. General information, standard values and test conditions. General information and standard values
BS EN 125000:1998 BS EN 125000:1998. Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials
BS ISO/IEC TR 13818-5:1997 BS ISO/IEC TR 13818-5:1997.
BS EN 1610:1998 BS EN 1610:1998. Construction and testing of drains and sewers
BS EN 1922:1998 BS EN 1922:1998. Information technology. Character repertoire and coding for interworking with Telex services
BS EN 45510-1:1998 BS EN 45510-1:1998. Guide for the procurement of power station equipment. Common clauses
BS EN 60704-2-7:1998 BS EN 60704-2-7:1998. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Particular requirements for fans
BS EN 60335-2-60:1998 BS EN 60335-2-60:1998. Specification for safety of household and similar electrical appliances. Particular requirements. Whirlpool baths
BS EN 1441:1998 BS EN 1441:1998. Medical devices. Risk analysis
BS EN 1622:1998 BS EN 1622:1998. Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN)
BS ISO/IEC 13814:1998 BS ISO/IEC 13814:1998. Information technology. Programming languages. Generic package of complex elementary functions for Ada
BS ISO/IEC 13813:1998 BS ISO/IEC 13813:1998. Information technology. Programming languages. Generic packages of real and complex type declarations and basic operations for Ada (including vector and matrix types)
BS EN 1014-3:1998 BS EN 1014-3:1998. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the benzo[a]pyrene content of creosote
BS EN ISO 9241-15:1998 BS EN ISO 9241-15:1998. Ergonomic requirements for office work with visual display terminals (VDTs). Command dialogues
BS EN 1264-1:1998 BS EN 1264-1:1998. Floor heating. Systems and components. Definitions and symbols
BS 4551-1:1998 BS 4551-1:1998. Methods of testing mortars, screeds and plasters. Physical testing
BS EN 1792:1998 BS EN 1792:1998. Welding. Multilingual list of terms for welding and related processes
BS EN 670:1998 BS EN 670:1998. Resilient floor coverings. Identification of linoleum and determination of cement content and ash residue
BS EN 993-10:1998, BS 1902-5.10:1998 BS EN 993-10:1998, BS 1902-5.10:1998. Methods of test for dense shaped refractory products. Determination of permanent change in dimensions on heating
BS EN 45502-1:1998 BS EN 45502-1:1998. Active implantable medical devices. General requirements for safety, marking and information to be provided by the manufacturer
BS EN 60947-5-2:1998 BS EN 60947-5-2:1998. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches
BS EN 1592-3:1998 BS EN 1592-3:1998. Aluminium and aluminium alloys. HF seam welded tubes. Tolerances on dimensions and form for circular tubes
BS EN 1592-4:1998 BS EN 1592-4:1998. Aluminium and aluminium alloys. HF seam welded tubes. Tolerances on dimensions and form for square, rectangular and shaped tubes
BS EN 1592-2:1998 BS EN 1592-2:1998. Aluminium and aluminium alloys. HF seam welded tubes. Mechanical properties
BS EN 586-1:1998 BS EN 586-1:1998. Aluminium and aluminium alloys. Forgings. Technical conditions for inspection and delivery
BS EN ISO 7250:1998 BS EN ISO 7250:1998. Basic human body measurements for technological design
BS EN ISO 8442-3:1998 BS EN ISO 8442-3:1998. Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for silver-plated table and decorative holloware
BS EN 12019:1998 BS EN 12019:1998. Zinc and zinc alloys. Optical emission spectrometric analysis
BS EN 12060:1998 BS EN 12060:1998. Zinc and zinc alloys. Method of sampling. Specifications
BS ISO 10006:1997 BS ISO 10006:1997. Quality management. Guidelines to quality in project management
BS EN 1066:1998 BS EN 1066:1998. Adhesives. Sampling
BS EN ISO 9241-8:1998 BS EN ISO 9241-8:1998. Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for displayed colours
BS EN 476:1998 BS EN 476:1998. General requirements for components used in discharge pipes, drains and sewers for gravity systems
BS ISO TR 12764:1997 BS ISO TR 12764:1997. Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
BS EN 60669-2-1:1998 BS EN 60669-2-1:1998. Switches for household and similar fixed electrical installations. Particular requirements. Electronic switches
BS ISO/IEC 14143-1:1998 BS ISO/IEC 14143-1:1998. Information technology. Software measurement. Functional size measurement. Definition of concepts
BS EN 60352-6:1998, IEC 60352-6:1997 BS EN 60352-6:1998, IEC 60352-6:1997. Solderless connections. Solderless insulation piercing connections. General requirements, test methods and practical guidance
BS ISO/IEC 12089:1997 BS ISO/IEC 12089:1997. Information technology. Computer graphics and image processing. Encoding for the image interchange facility (IIF)
BS ISO/IEC 15026:1998 BS ISO/IEC 15026:1998. Information technology. System and software integrity levels
BS EN 61334-4-41:1998, IEC 61334-4-41:1996 BS EN 61334-4-41:1998, IEC 61334-4-41:1996. Distribution automation using distribution line carrier systems. Data communication protocols. Application protocols. Distribution line message specification
BS IEC 61334-1-4:1995 BS IEC 61334-1-4:1995. Distribution automation using distribution line carrier systems. General considerations. Guide to identification of data transmission parameters concerning medium and low-voltage distribution mains
BS IEC 60050(121):1998, IEC 60050-121:1998 BS IEC 60050(121):1998, IEC 60050-121:1998. International electrotechnical vocabulary. Electromagnetism
BS EN 186290:1998 BS EN 186290:1998. Harmonized system of quality assessment for electronic components. Connector sets for optical fibres and cables. Type MPO
BS EN 60598-2-4:1998 BS EN 60598-2-4:1998. Luminaires. Particular requirements. Portable general purpose luminaires
BS EN 160200-2:1998 BS EN 160200-2:1998. Harmonized system of quality assessment for electronic components. Sectional specification. Microwave modular electronic units of assessed quality. Index of test methods
BS EN 61953:1998, IEC 61953:1997 BS EN 61953:1998, IEC 61953:1997. Diagnostic X-ray imaging equipment. Characteristics of mammographic anti-scatter grids
BS EN 61041-4:1998, BS 7434-4:1998,IEC 61041-4:1997 BS EN 61041-4:1998, BS 7434-4:1998,IEC 61041-4:1997. Non-broadcast video tape recorders. Methods of measurement. Calibration tape (NTSC/PAL/SECAM)
BS EN 61041-5:1998, BS 7434-5:1998,IEC 61041-5:1997 BS EN 61041-5:1998, BS 7434-5:1998,IEC 61041-5:1997. Non-broadcast video tape recorders. Methods of measurement. High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)
BS EN 61248-7:1998, IEC 61248-7:1997 BS EN 61248-7:1998, IEC 61248-7:1997. Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure
BS EN 61595-2:1998, IEC 61595-2:1997 BS EN 61595-2:1998, IEC 61595-2:1997. Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use. Format B
BS EN 61566:1998, IEC 61566:1997 BS EN 61566:1998, IEC 61566:1997. Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz
BS ISO/IEC 9314-6:1998 BS ISO/IEC 9314-6:1998. Information processing systems. Fibre Distributed Data Interface (FDDI). Station management (SMT)
BS ISO/IEC 9314-7:1998 BS ISO/IEC 9314-7:1998. Information processing systems. Fibre Distributed Data Interface (FDDI). Physical layer protocol (PHY-2)
BS ISO/IEC 9314-8:1998 BS ISO/IEC 9314-8:1998. Information processing systems. Fibre Distributed Data Interface (FDDI). Media access control-2 (MAC-2)
BS ISO/IEC 15505:1997 BS ISO/IEC 15505:1997. Information technology. Private integrated services network (PISN). Specification, functional model and information flows. Message waiting indication supplementary service (MWISD)
BS ISO/IEC 15506:1997 BS ISO/IEC 15506:1997. Information technology. Private integrated services network (PISN). Inter-exchange signalling protocol. Message waiting indication supplementary service (QSIG-MWI)
BS EN 415-4:1998 BS EN 415-4:1998. Safety of packaging machines. Palletizers and depalletizers
BS ISO/IEC 13818-7:1997 BS ISO/IEC 13818-7:1997. Information technology. Generic coding of moving pictures and associated audio information. Advanced audio coding (AAC)
BS 7164-32.1:1998, ISO 10398:1998 BS 7164-32.1:1998, ISO 10398:1998. Chemical tests for raw and vulcanized rubber. Methods for determination of accelerators. Gas and thin layer chromatography
BS EN ISO 14630:1998 BS EN ISO 14630:1998. General requirements for non-active surgical implants
BS EN 60335-2-90:1998, IEC 60335-2-90:1997 BS EN 60335-2-90:1998, IEC 60335-2-90:1997. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial microwave ovens
BS ISO 4602:1997 BS ISO 4602:1997. Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft
BS ISO/IEC 13818-6:1998 BS ISO/IEC 13818-6:1998. Information technology. Generic coding of moving pictures and associated audio information. Extensions for DSM-CC
BS EN 1731:1998 BS EN 1731:1998. Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat
BS ISO TR 5168:1998 BS ISO TR 5168:1998. Measurement of fluid flow. Evaluation of uncertainties


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment