2009/11/11

Update for Normos

DIN Standards : Update & Latest for DIN Standards

DIN EN 15532:2009 Cycles - Terminology; German version EN 15532:2008 + AC:2009 (Foreign Standard) DIN EN 764-1:2004 Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size; German version EN 764-1:2004 (Foreign Standard) DIN EN 15947-1:2009 Pyrotechnic articles - Fireworks category 1, 2 and 3 - Part 1: Terminology; German version prEN 15947-1:2009 (Foreign Standard) DIN EN 1330-9:2009 Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing; Trilingual version EN 1330-9:2009 (Foreign Standard) DIN EN 15528:2009 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure; German version EN 15528:2008 (Foreign Standard) DIN 81208-19:2009 Manoeuvring of ships - Part 19: Planar motion test (Foreign Standard) DIN EN 9100:2009 Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994); German and English version Fpr DIN EN ISO/IEC 17030:2009 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2003); German and English version EN ISO/IEC 17030:2009 (Foreign Standard) DIN 58940-7:2009 Medical microbiology - Susceptibility testing of microbial pathogens to antimicrobial agents - Part 7: Determination of the minimum bactericidal concentration (MBC) with the method of microbouillondilution; Text in German and English (Foreign Standard) DIN EN 12006-2:2009 Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 2: Vascular prostheses including cardiac valve conduits; German version EN 12006-2:1998+A1:2009 (Foreign Standard) DIN EN 12006-3:2009 Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 3: Endovascular devices; German version EN 12006-3:1998+A1:2009 (Foreign Standard) DIN EN 15267-2:2009 Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer's quality management system and post certification surveillance for the manufacturing process; German version EN 15267-2:2009 (Foreign Standard DIN EN 15327-1:2009 Railway applications - Passenger alarm subsystem - Part 1: General requirements and passenger interface for the passenger emergency brake system; German version EN 15327-1:2008 (Foreign Standard) DIN EN 15333-2:2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus; German version EN 15333-2:2009 (Foreign Standard) DIN EN 614-1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles; German version EN 614-1:2006+A1:2009 (Foreign Standard) DIN EN 13059:2009 Safety of industrial trucks - Test methods for measuring vibration; German version EN 13059:2002+A1:2008 (Foreign Standard) DIN EN 15170:2009 Characterization of sludges - Determination of calorific value; German version EN 15170:2008 (Foreign Standard) DIN EN 379:2009 Personal eye-protection - Automatic welding filters; German version EN 379:2003+A1:2009 (Foreign Standard) DIN EN 671-3:2009 Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose; German version EN 671-3:2009 (Foreign Standard) DIN EN 953:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards; German version EN 953:1997+A1:2009 (Foreign Standard) DIN EN 1366-3:2009 Fire resistance tests for service installations - Part 3: Penetration seals; German version EN 1366-3:2009 (Foreign Standard) DIN EN 1760-2:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars; German version EN 1760-2:2001+A1:2009 (Foreign Standard) DIN EN 12566-3:2009 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants; German version EN 12566-3:2005+A1:2009 (Foreign Standard) DIN EN 12845:2009 Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance; German version EN 12845:2004+A2:2009 (Foreign Standard) DIN EN 13158:2009 Protective clothing - Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers - Requirements and test methods; German version EN 13158:2009 (Foreign Standard) DIN EN 13277-7:2009 Protective equipment for martial arts - Part 7: Additional requirements and test methods for hand and foot protectors; German version EN 13277-7:2009 (Foreign Standard) DIN EN 14710-1:2009 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements; German version EN 14710-1:2005+A2:2008 (Foreign Standard) DIN EN 14710-2:2009 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements; German version EN 14710-2:2005+A2:2008 (Foreign Standard) DIN EN 15089:2009 Explosion isolation systems; German version EN 15089:2009 (Foreign Standard) DIN EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles; German version EN 15267-1:2009 (Foreign Standard) DIN EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals; German version EN 15882-3:2009 (Foreign Standard) DIN EN 15302:2009 Railway applications - Method for determining the equivalent conicity; German version EN 15302:2008 (Foreign Standard) DIN EN 1265:2009 Safety of machinery - Noise test code for foundry machines and equipment; German version EN 1265:1999+A1:2008 (Foreign Standard) DIN EN 1915-4:2009 Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction; German version EN 1915-4:2004+A1:2009 (Foreign Standard) DIN EN 12053:2009 Safety of industrial trucks - Test methods for measuring noise emissions; German version EN 12053:2001+A1:2008 (Foreign Standard) DIN 6336:2008 Star grips (Foreign Standard) DIN EN 14399-9:2009 High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies; German version EN 14399-9:2009 (Foreign Standard) DIN EN 14399-10:2009 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload; German version EN 14399-10:2009 (Foreign Standard) DIN EN 980 and DIN EN 1041 Medical Devices Package DIN EN 980 and DIN EN 1041 Medical Devices Package (Foreign Standard) DIN 3961 / 3962 / 3963 / 3964 / 3967 Tolerances for Cylindrical Gear Teeth Package DIN EN 253:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German and English version EN 253:2009 (Foreign Stand DIN EN 488:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German and English version prEN 488:2009 (Fo DIN EN 982:2009 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics; German version EN 982:1996+A1:2008 (Foreign Standard) DIN EN 983:2009 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics; German version EN 983:1996+A1:2008 (Foreign Standard) DIN EN 14419:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems; German and English version EN 14419:2009 (Foreign Standard) DIN EN 15698-1:2009 District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German and English version EN 15698 DIN EN 489:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German and English version EN 489:2009 (Foreign St DIN EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:2009 (Foreign Standard) DIN EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements; German version EN 11 DIN EN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1401-1:2009 (Foreign Standard) DIN EN 1447:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; German version EN 1447:2009 (Foreign Standard) DIN EN 1594:2009 Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2009 (Foreign Standard) DIN EN 1796:2009 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2006+A1:2008 (Foreign Standard) DIN EN 1852-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1852-1:2009 (Foreign Standard) DIN EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A; German version EN 10208-1:2009 (Foreign Standard) DIN EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B; German version EN 10208-2:2009 (Foreign Standard) DIN EN 12245:2009 Transportable gas cylinders - Fully wrapped composite cylinders; German version EN 12245:2009 (Foreign Standard) DIN EN 13445-4/A5:2009 Unfired pressure vessels - Part 4: Fabrication; German version EN 13445-4:2002/A5:2009 (Foreign Standard) DIN EN 14917:2009 Metal bellows expansion joints for pressure applications; German version EN 14917:2009 (Foreign Standard) DIN EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding; German version EN 1011-1:2009 (Foreign Standard) DIN EN 12417:2009 Machine tools - Safety - Machining centres; German version EN 12417:2001+A2:2009 (Foreign Standard) DIN EN 12717:2009 Safety of machine tools - Drilling machines; German version EN 12717:2001+A1:2009 (Foreign Standard) DIN EN 12957:2009 Machine tools - Safety - Electro discharge machines; German version EN 12957:2001+A1:2009 (Foreign Standard) DIN EN 14070:2009 Safety of machine tools - Transfer and special-purpose machines; German version EN 14070:2003+A1:2009 (Foreign Standard) DIN EN 15617:2009 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels; German version EN 15617:2009 (Foreign Standard) DIN EN 15646:2009 Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods; German version EN 15646:2009 (Foreign Standard) DIN EN 15316-4-6:2009 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems; German version EN 15316-4-6:2007 (Foreign Standard) DIN EN 61400-25-4:2009 Wind turbines - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile (IEC 61400-25-4:2008); English version EN 61400-25-4:2008 (Foreign Standard) DIN EN 60317-8:2009 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180 (IEC 55/1118/CDV:2009); German version FprEN 60317-8:2009 (Foreign Standard) DIN EN 60317-12:2009 Specifications for particular types of winding wire - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 (IEC 55/1119/CDV:2009); German version FprEN 60317-12:2009 (Foreign Standard) DIN EN 60317-13:2009 Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 (IEC 55/1120/CDV:2009); German version FprEN 60317-13:2009 (Foreign Standard) DIN EN 60317-15/A1:2009 Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 (IEC 55/1121/CDV:2009); German version EN 60317-15:2004/FprA1:2009 (Foreign Standard) DIN EN 60317-17:2009 Specifications for particular types of winding wire - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 (IEC 55/1122/CDV:2009); German version FprEN 60317-17:2009 (Foreign Standard) DIN EN 60317-18/A1:2009 Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 (IEC 55/1123/CDV:2009); German version EN 60317-18:2004/FprA1:2009 (Foreign Standard) DIN EN 60317-22/A1:2009 Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 (IEC 55/1124/CDV:2009); German version EN 60317-22:2004/FprA1:2009 (Foreign Standard) DIN EN 60317-25:2009 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminum wire, class 200 (IEC 55/1125/CDV:2009); German version FprEN 60317-25:2009 (Foreign Standard) DIN EN 60317-26/A2:2009 Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200 (IEC 55/1126/CDV:2009); German version EN 60317-26:1996/FprA2:2009 (Foreign Standard) DIN EN 60317-29/A2:2009 Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 (IEC 55/1127/CDV:2009); German version EN 60317-29:1996/FprA2:2009 (Foreign Standard) DIN EN 60317-42/A1:2009 Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200 (IEC 55/1128/CDV:2009); German version EN 60317-42:1997/FprA1:2009 (Foreign Standard) DIN EN 60317-43/A1:2009 Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 (IEC 55/1129/CDV:2009); German version EN 60317-43:1997/FprA1:2009 (Foreign Standard) DIN EN 60317-44/A1:2009 Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 (IEC 55/1130/CDV:2009); German version EN 60317-44:1997/FprA1:2009 (Foreign Standard)DIN EN 934-2:2009 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling; German version EN 934-2:2009 (Foreign Standard) DIN EN 13460:2009 Maintenance - Documentation for maintenance; German version EN 13460:2009 (Foreign Standard) DIN EN 13888:2009 Grout for tiles - Requirements, evaluation of conformity, classification and designation; German version EN 13888:2009 (Foreign Standard) DIN EN 15663:2009 Railway applications - Definition of vehicle reference masses; German version EN 15663:2009 (Foreign Standard) DIN EN ISO/IEC 19796-1:2009 Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005); German version EN ISO/IEC 19796-1:2009 (Foreign Standard) DIN EN 14166:2009 Foodstuffs - Determination of vitamin B<(Index)6> by microbiological assay; German version EN 14166:2009 (Foreign Standard) DIN EN 285:2009 Sterilization - Steam sterilizers - Large sterilizers; German version EN 285:2006+A2:2009 (Foreign Standard) DIN EN 868-2:2009 Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods; German version EN 868-2:2009 (Foreign Standard) DIN EN 868-3:2009 Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods; German version EN 868 DIN EN 868-4:2009 Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods; German version EN 868-4:2009 (Foreign Standard) DIN EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods; German version EN 868-5:2009 (Foreign Standard) DIN EN 868-6:2009 Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods; German version EN 868-6:2009 (Foreign Standard) DIN EN 868-7:2009 Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods; German version EN 868-7:2009 (Foreign Standard) DIN EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods; German version EN 868-8:2009 (Foreign Standard) DIN EN 868-9:2009 Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods; German version EN 868-9:2009 (Foreign Standard) DIN EN 868-10:2009 Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods; German version EN 868-10:2009 (Foreign Standard) DIN EN 1422:2009 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods; German version EN 1422:1997+A1:2009 (Foreign Standard) DIN EN 149:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking; German version EN 149:2001+A1:2009 (Foreign Standard) DIN EN 405:2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; German version EN 405:2001+A1:2009 (Foreign Standard) DIN EN 615:2009 Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders); German version EN 615:2009 (Foreign Standard) DIN EN 1760-1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors; German version EN 1760-1:1997+A1:2009 (Foreign Standard) DIN EN 1777:2009 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing; German version EN 1777:2004+A1:2009 (Foreign Standard) DIN EN 1846-2:2009 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance; German version EN 1846-2:2001+A3:2009 (Foreign Standard) DIN EN 13034:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB 6 equipment); German version EN 13034:2005+A1:2009 (Foreign Sta DIN EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements; German version EN 13463-1:2009 (Foreign Standard) DIN EN 14043:2009 High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods; German version EN 14043:2005+A1:2009 (Foreign Standard) DIN EN 14605:2009 Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB 3 and PB 4); German version E DIN EN 15713:2009 Secure destruction of confidential material - Code of practice; German version EN 15713:2009 (Foreign Standard) DIN EN 15767-2:2009 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 2: Water nozzles; German version EN 15767-2:2009 (Foreign Standard) DIN EN 60749-32/A1:2009 Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced) (IEC 47/2018/CDV:2009); German version EN 60749-32:2003/FprA1:2009 (Foreign Standard) DIN EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation; German version EN 15610:2009 (Foreign Standard) DIN EN 62562:2009 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates (IEC 46F/118/CDV:2009); German version FprEN 62562:2009 (Foreign Standard) DIN EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners; German version EN 409:2009 (Foreign Standard) DIN 2430-1:2009 Piping for pigging systems - Part 1: Pipes and elbows (Foreign Standard) DIN 2430-2:2009 Piping for pigging systems - Part 2: Piping connections (Foreign Standard) DIN 2430-3:2009 Piping for pigging systems - Part 3: Testing prior to commissioning (Foreign Standard) DIN EN 334:2009 Gas pressure regulators for inlet pressures up to 100 bar; German version EN 334:2005+A1:2009 (Foreign Standard) DIN EN 448:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2009 (Foreign Standard) DIN EN 593:2009 Industrial valves - Metallic butterfly valves; German version EN 593:2009 (Foreign Standard) DIN EN 15632-1:2009 District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods; German and English version EN 15632-1:2009 (Foreign Standard) DIN EN 15632-4:2009 District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes - Requirements and test methods; German and English version EN 15632-4:2009 (Foreign Standard) DIN EN 10244-1:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; German version EN 10244-1:2009 (Foreign Standard) DIN EN 13128:2009 Safety of machine tools - Milling machines (including boring machines); German version EN 13128:2001+A2:2009 (Foreign Standard) DIN EN 13898:2009 Machine tools - Safety - Sawing machines for cold metal; German version EN 13898:2003+A1:2009 (Foreign Standard) DIN EN 14587-2:2009 Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant; German version EN 14587-2:2009 (Foreign Standard) DIN EN 15594:2009 Railway applications - Track - Restoration of rails by electric arc welding; German version EN 15594:2009 (Foreign Standard) DIN EN 15711:2009 Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements; German version EN 15711:2009 (Foreign Standard) DIN EN 15773:2009 Industrial application of powder organic coatings to hot dip galvanized and sherardized steel articles duplex systems - Specifications, recommendations and guidelines; German version EN 15773:2009 (Foreign Standard) DIN EN 16001:2009 Energy management systems - Requirements with guidance for use; German version EN 16001:2009 (Foreign Standard) DIN EN 60749-23/A1:2009 Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life (IEC 47/2017/CDV:2009); German version EN 60749-23:2004/FprA1:2009 (Foreign Standard) DIN EN 61169-18:2009 Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA (IEC 46F/136/CDV:2009); German version FprEN 61169-18:2009 (Foreign Standard) DIN EN 61169-19:2009 Radio-frequency connectors - Part 19: Sectional specification- Radio frequency coaxial connectors of type SSMB (IEC 46F/138/CDV:2009); German version FprEN 61169-19:2009 (Foreign Standard) DIN EN 61375-1:2009 Electronic railway equipment - Train communication network - Part 1: TCN - Train Communication Network General Architecture (IEC 9/1273/CDV:2009); English version FprEN 61375-1:2009 (Foreign Standard) DIN EN 61375-2-1:2009 Electronic Railway Equipment - Train Communication Network - Part 2-1: WTB - Wire Train Bus (IEC 9/1274/CDV:2009); English version FprEN 61375-2-1:2009 (Foreign Standard) DIN EN 61375-2-2:2009 Electronic Railway Equipment - Train Communication Network - Part 2-2: WTB - Wire Train Bus Conformance Testing (IEC 9/1275/CDV:2009); English version FprEN 61375-2-2:2009 (Foreign Standard) DIN EN 61375-3-1:2009 Electronic Railway Equipment - Train Communication Network - Part 3-1: MVB - Multipurpose Vehicle Bus (IEC 9/1276/CDV:2009); English version FprEN 61375-3-1:2009 (Foreign Standard) DIN EN 61375-3-2:2009 Electronic Railway Equipment - Train Communication Network - Part 3-2: MVB - Multipurpose Vehicle Bus Conformance Testing (IEC 9/1277/CDV:2009); English version FprEN 61375-3-2:2009 (Foreign Standard) DIN EN 61375-3-3:2009 Electronic Railway Equipment - Train Communication Network - Part 3-3: CCN - CANopen Consist Network Bus (IEC 9/1278/CDV:2009); English version FprEN 61375-3-3:2009 (Foreign Standard) DIN EN 62264-5:2009 Enterprise system integration - Part 5: Business to manufacturing transactions (IEC 65E/100/CDV:2008); English version FprEN 62264-5:2008 (Foreign Standard) DIN EN 62439-1:2009 Industrial communication networks: high availability automation networks - Part 1: General concepts and calculation methods (Including RSTP) (IEC 65C/519/CDV:2008); English version FprEN 62439-1:2008 (Foreign Standard) DIN EN 62439-2:2009 Industrial communication networks: high availability automation networks - Part 2: Media Redundancy Protocol (MRP) (IEC 65C/519/CDV:2008); English version FprEN 62439-2:2008 (Foreign Standard) DIN EN 62439-3:2009 Industrial communication networks: high availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High availability Seamless Ring (HSR) (IEC 65C/519/CDV:2008); English version FprEN 62439-3:2008 (Foreign Standard) DIN EN 62439-4:2009 Industrial communication networks: high availability automation networks - Part 4: Cross-network Redundancy Protocol (CRP) (IEC 65C/519/CDV:2008); English version FprEN 62439-4:2008 (Foreign Standard) DIN EN 62439-5:2009 Industrial communication networks: high availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) (IEC 65C/519/CDV:2008); English version FprEN 62439-5:2008 (Foreign Standard) DIN EN 62439-6:2009 Industrial communication networks: high availability automation networks - Part 6: Distributed Redundancy Protocol (DRP) (IEC 65C/519/CDV:2008); English version FprEN 62439-6:2008 (Foreign Standard) DIN EN 62443-2-1:2009 Industrial communication networks - network and system security - Part 2-1: Establishing an industrial automation and control system security program (IEC 65/438/CDV:2009); German version FprEN 62443-2-1:2009 (Foreign Standard) DIN ISO/IEC 19770-1:2009 Information technology - Software asset management - Part 1: Processes (ISO/IEC 19770-1:2006) (Foreign Standard) DIN EN 1010-3/A1:2008 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines; English version EN 1010-3:2002/FprA1:2009 (Foreign Standard) DIN EN 1010-4/A1:2008 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines; English version EN 1010-4:2004/FprA1:2009 (Foreign Standard) DIN EN 12299:2009 Railway applications - Ride comfort for passengers - Measurement and evaluation; German version EN 12299:2009 (Foreign Standard) DIN EN 14067-4:2009 Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track; German version EN 14067-4:2005+A1:2009 (Foreign Standard) DIN EN 15220-1:2009 Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators; German version EN 15220-1:2008 (Foreign Standard) DIN EN 15355:2009 Railway applications - Braking - Distributor valves and distributor-isolating devices; German version EN 15355:2008 (Foreign Standard) DIN EN 61097-14:2009 Global maritime distress and safety system (GMDSS) - Part 14: AIS search and rescue transmitter (AIS-SART) - Operational and performance requirements, methods of testing and required test results (IEC 80/557A/CDV:2009); English version FprEN 61097-14:2009 DIN EN 62320-1/A1:2009 Maritime navigation and radiocommunication equipment and systems - Automatic Identification System (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results (IEC 62320-1:2007/A1:2008 DIN EN 2854-002:2009 Aerospace series - Cables, electrical, for general purpose - Cross sections equal to and greater than 9 mm<(hoch)2> - Operating temperatures between -55 ?C and 260 ?C - Part 002: General; German and English version EN 2854-002:2009 (Foreign Standard) DIN EN 2883:2009 Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C; German and English version EN 2883:2009 (Foreign Standard) DIN EN 3052:2009 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C; German and English version EN 3052:2009 (Foreign Sta DIN EN 3155-001:2009 Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical specification; German and English version EN 3155-001:2009 (Foreign Standard) DIN EN 3613:2009 Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1275 MPa/650 ?C; German and English version EN 3613:2009 (Foreign Standard) DIN EN 3614:2009 Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 900 MPa/650 ?C; German and English version EN 3614:2009 (Foreign Standard) DIN EN 4071:2009 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature) / 425 ?C; German and English version EN 4071:2009 (Foreign Standard) DIN EN 4072:2009 Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature) / 425 ?C; German and English version DIN EN 4074:2009 Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 ?C; German and English version EN 4074:2009 (Foreign DIN EN 4127:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 ?C; German and English version EN 4127:2009 (Foreign Standard) DIN EN 4128:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425 ?C; German and English version EN 4128:2009 (Fo DIN EN 4132:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English version EN 4132:2009 (Foreign Standard) DIN EN 4135:2009 Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C; German and English version EN 4135:2 DIN EN 4136:2009 Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English version EN 4136:2009 (Foreign Standard) DIN EN 4137:2009 Aerospace series - Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C; German and English version EN 4137:2009 (Foreign Standard) DIN EN 4301:2009 Aerospace series - Identification marking methods for engine items - Engineering requirements; German and English version EN 4301:2009 (Foreign Standard) DIN EN 4474:2009 Aerospace series - Aluminium pigmented coatings - Coating methods; German and English version EN 4474:2009 (Foreign Standard) DIN EN 12312-13:2009 Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment; German version EN 12312-13:2002+A1:2009 (Foreign Standard) DIN EN 12312-16:2009 Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment; German version EN 12312-16:2005+A1:2009 (Foreign Standard) DIN EN 13155:2009 Cranes - Safety - Non-fixed load lifting attachments; German version EN 13155:2003+A2:2009 (Foreign Standard) DIN EN 13531:2009 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997, modified); German version EN 13531:2001+A1:2008 (Foreign Standard) DIN EN 15573:2009 Earth-moving machinery - Design requirements for circulation on the road; German version EN 15573:2008 (Foreign Standard) DIN EN 15635:2009 Steel static storage systems - Application and maintenance of storage equipment; German version EN 15635:2008 (Foreign Standard) DIN EN 12375:2009 Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:2009 (Foreign Standard) DIN EN 15766:2009 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone; German version EN 15766:2009 (Foreign Standard) DIN EN 13732:2009 Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene; German version EN 13732:2002+A2:2009 (Foreign Standard) DIN EN 14910:2009 Garden equipment - Walk-behind combustion engine powered trimmers - Safety; German version EN 14910:2007+A1:2009 (Foreign Standard) DIN 10516:2009 Food hygiene - Cleaning and disinfection (Foreign Standard) DIN EN 12821:2009 Foodstuffs - Determination of vitamin D by high performance liquid chromatography - Measurement of cholecalciferol (D<(Index)3>) or ergocalciferol (D<(Index)2>); German version EN 12821:2009 (Foreign Standard) DIN EN 14132:2009 Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up; German version EN 14132:2009 (Foreign Standard) DIN EN 14133:2009 Foodstuffs - Determination of ochratoxin A in wine and beer - HPLC method with immunoaffinity column clean-up; German version EN 14133:2009 (Foreign Standard) DIN EN 12547:2009 Centrifuges - Common safety requirements; German version EN 12547:1999+A1:2009 (Foreign Standard) DIN EN 15228:2009 Structural timber - Structural timber preservative treated against biological attack; German version EN 15228:2009 (Foreign Standard) DIN EN 14678-1:2009 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers; German version EN 14678-1:2006+A1:2009 (Foreign Standard) DIN EN 15326:2009 Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method; German version EN 15326:2007+A1:2009 (Foreign Standard) DIN EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method; German version EN 15692:2009 (Foreign Standard) DIN EN 15769:2009 Ethanol as a blending component of petrol - Determination of appearance - Visual method; German version EN 15769:2009 (Foreign Standard) DIN EN 573-3:2009 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German version EN 573-3:2009 (Foreign Standard) DIN EN 10025-6:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition; German version EN 10025-6:2004+A1:2009 (Foreign Standard) DIN EN 10028-3:2009 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2009 (Foreign Standard) DIN EN 10028-4:2009 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties; German version EN 10028-4:2009 (Foreign Standard) DIN EN 10028-5:2009 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2009 (Foreign Standard) DIN EN 10028-6:2009 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2009 (Foreign Standard) DIN EN 14121:2009 Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications; German version EN 14121:2009 (Foreign Standard) DIN EN 1912:2009 Structural timber - Strength classes - Assignment of visual grades and species; German version EN 1912:2004+A3:2009 (Foreign Standard) DIN EN 13226:2009 Wood flooring - Solid parquet elements with grooves and/or tongues; German version EN 13226:2009 (Foreign Standard) DIN EN 13999-3:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007+A1:2009 (Foreign Standard) DIN EN 13999-4:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates; German version EN 13999-4:2007+A1:2009 (Foreign Standard) DIN EN 15870:2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified); German version EN 15870:2009 (Foreign Standard) DIN EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling; German version EN 934-4:2009 (Foreign Standard) DIN EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products; German version EN 1856-1:2009 (Foreign Standard) DIN EN 1856-2:2009 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes; German version EN 1856-2:2009 (Foreign Standard) DIN EN 1859:2009 Chimneys - Metal chimneys - Test methods; German version EN 1859:2009 (Foreign Standard) DIN EN 12350-1:2009 Testing fresh concrete - Part 1: Sampling; German version EN 12350-1:2009 (Foreign Standard) DIN EN 12350-2:2009 Testing fresh concrete - Part 2: Slump-test; German version EN 12350-2:2009 (Foreign Standard) DIN EN 12350-3:2009 Testing fresh concrete - Part 3: Vebe test; German version EN 12350-3:2009 (Foreign Standard) DIN EN 12350-4:2009 Testing fresh concrete - Part 4: Degree of compactability; German version EN 12350-4:2009 (Foreign Standard) DIN EN 12350-5:2009 Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:2009 (Foreign Standard) DIN EN 12350-7:2009 Testing fresh concrete - Part 7: Air content - Pressure methods; German version EN 12350-7:2009 (Foreign Standard) DIN EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens; German version EN 12591:2009 (Foreign Standard) DIN EN 13422:2009 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders; German version EN 13422:2004+A1:2009 (Foreign Standard) DIN EN 13848-3:2009 Railway applications - Track - Track geometry quality - Part 3: Measuring systems - Track construction and maintenance machines; German version EN 13848-3:2009 (Foreign Standard) DIN EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; German version EN 416-1:2009 (Foreign Standard) DIN EN 1335-2:2009 Office furniture - Office work chair - Part 2: Safety requirements; German version EN 1335-2:2009 (Foreign Standard) DIN EN 1335-3:2009 Office furniture - Office work chair - Part 3: Test methods; German version EN 1335-3:2009 (Foreign Standard) DIN EN 13613:2009 Roller sports equipment - Skateboards - Safety requirements and test methods; German version EN 13613:2009 (Foreign Standard) DIN EN 13843:2009 Roller sports equipment - Inline-skates - Safety requirements and test methods; German version EN 13843:2009 (Foreign Standard) DIN EN 15059:2009 Snow grooming equipment - Safety requirements; German version EN 15059:2009 (Foreign Standard) DIN EN 15706:2009 Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts; German version EN 15706:2009 (Foreign Standard)DIN EN 980 and DIN EN 1041 Medical Devices Package DIN EN 980 and DIN EN 1041 Medical Devices Package DIN 3961 / 3962 / 3963 / 3964 / 3967 - Tolerances for Cylindrical Gear Teeth Package DIN 3961 / 3962 / 3963 / 3964 / 3967 - Tolerances for Cylindrical Gear Teeth PackageDIN EN 13867:2009 Concentrates for haemodialysis and related therapies; German version EN 13867:2002+A1:2009 DIN EN 1760-3:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices; German version EN 1760-3:2004+A1:2009 DIN EN 1993-1-2 Berichtigung 1:2009 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design; German version EN 1993-1-2:2005 + AC:2005, Corrigendum to DIN EN 1993-1-2:2006-10; German version EN 1993-1-2:2005/AC:2009 DIN EN 12101-10 Berichtigung 1:2009 Smoke and heat control systems - Part 10: Power supplies; German version EN 12101-10:2005, Corrigendum to DIN EN 12101-10:2006-01; German version EN 12101-10:2005/AC:2007 DIN EN 12613:2009 Plastics warning devices for underground cables and pipelines with visual characteristics; German version EN 12613:2009 DIN EN 13565-2:2009 Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance; German version EN 13565-2:2009 + AC:2009 DIN EN 14044:2009 High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods; German version EN 14044:2005+A1:2009 DIN EN 14878 Berichtigung 1:2009 Textiles - Burning behaviour of children's nightwear - Specification; German version EN 14878:2007, Corrigendum to DIN EN 14878:2007-08; German version EN 14878:2007/AC:2009 DIN EN 15767-1:2009 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 1: General requirements for portable monitor assemblies; German version EN 15767-1:2009 DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009 DIN EN 980 and DIN EN 1041 Medical Devices Package DIN EN 980 and DIN EN 1041 Medical Devices Package DIN 3961 / 3962 / 3963 / 3964 / 3967 - Tolerances for Cylindrical Gear Teeth Package DIN 3961 / 3962 / 3963 / 3964 / 3967 - Tolerances for Cylindrical Gear Teeth Package DIN 34827 Berichtigung 1:2009 Hexalobular socket set screws, Corrigendum to DIN 34827:2005-11 DIN EN 1591-1:2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method; German version EN 1591-1:2001+A1:2009 DIN EN 12807:2009 LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 12807:2009 DIN EN 14382:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar; German version EN 14382:2005+A1:2009+AC:2009 DIN EN 60534-2-1:2009 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 65B/711/CDV:2009); German version FprEN 60534-2-1:2009 DIN EN 692:2009 Machine tools - Mechanical presses - Safety; German version EN 692:2005+A1:2009 DIN EN 10244-2:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; German version EN 10244-2:2009 DIN 4140:2008 Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations DIN EN 437:2009 Test gases - Test pressures - Appliance categories; German version EN 437:2003+A1:2009 DIN EN 60749-30/A1:2009 Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing (IEC 47/2019/CDV:2009); German version EN 60749-30:2005/FprA1:2009 DIN EN 60749-34:2009 Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling (IEC 47/2027/CDV:2009); German version FprEN 60749-34:2009 DIN EN 62258-2:2009 Semiconductor die products - Part 2: Exchange data formats (IEC 47/2023/CDV:2009); English version FprEN 62258-2:2009 DIN EN 60749-7:2009 Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases (IEC 47/2021/CDV:2009); German version FprEN 60749-7:2009 DIN EN 60749-19/A1:2009 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength (IEC 47/2016/CDV:2009); German version EN 60749-19:2003/FprA1:2009 DIN EN 60749-21:2009 Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability (IEC 47/2025/CDV:2009); German version FprEN 60749-21:2009 DIN EN 61977:2009 Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification (IEC 86B/2870/CDV:2009); German version FprEN 61977:2009 DIN EN 62514:2009 Guidelines for Multimedia Gateway in Home Networks (IEC 100/1526/CDV:2009); German version FprEN 62514:2009 DIN EN 50173-1/AB:2009 Information technology - Generic cabling systems - Part 1: General requirements; German version EN 50173-1:2007/prAB:2009 DIN EN 50173-2/AA:2009 Information technology - Generic cabling systems - Part 2: Office premises; German version EN 50173-2:2007/prAA:2009 DIN EN 50173-3/AA:2009 Information technology - Generic cabling systems - Part 3: Industrial premises; German version EN 50173-3:2007/prAA:2009 DIN EN 50173-4/AA:2009 Information technology - Generic cabling systems - Part 4: Homes; German version EN 50173-4:2007/prAA:2009 DIN EN 50173-5/AA:2009 Information technology - Generic cabling systems - Part 5: Data centres; German version EN 50173-5:2007/prAA:2009 DIN EN 12472:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items; German version EN 12472:2005+A1:2009 DIN EN 15583-1:2009 Winter maintenance equipment - Snow ploughs - Part 1: Product description and requirements; German version EN 15583-1:2009 DIN EN 13104:2009 Railway applications - Wheelsets and bogies - Powered axles - Design method; German version EN 13104:2009 DIN EN 2755:2009 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification; German and English version EN 2755:2009 DIN EN 2815:2009 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 200 mm - R<(Index)m> 965 MPa; German and English version EN 2815:2009 (ForeiDIN EN 2818:2009 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 1070 MPa; German and English version EN 2818:2009 (Foreign StandDIN EN 3311:2009 Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining D 110 mm; German and Englisch version EN 3311:2009 DIN EN 3469:2009 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 1310 MPa; German and English version EN 3469:2009 (Foreign StandDIN EN 3475-515:2009 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance; German and English version EN 3475-515:2009 DIN EN 3475-812:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR); German and English version EN 3475-812:2009 DIN EN 3660-016:2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 016: Grommet nut, style A, self-locking and non self-locking - Product standard; German and English version FprEN 3660-016:2009 (Foreign StanDIN EN 3660-020:2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020: Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645 - Product standard; German and English versDIN EN 3660-021:2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 021: Cable outlet, style A, 90, unsealed, self-locking with clamp strain relief for EN 3645 - Product standard; German and English version EDIN EN 3660-062:2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 062: Cable outlet, style K, 90, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 - Product standard; German and EnglishDIN EN 3660-064:2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 and EN 4067 - Product standard; GeDIN EN 3660-065:2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 065: Cable outlet, style K, 90, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 and EN 4067 - Product standard; GermanDIN EN 3745-506:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance; German and English version EN 3745-506:2009 DIN EN 4645-002:2009 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 002: Specification of performance and contact arrangements; German and EngDIN EN 6059-502:2009 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs; German and English version EN 6059-502:2009 DIN EN 12312-1:2009 Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs; German version EN 12312-1:2001+A1:2009 DIN EN 12312-2:2009 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles; German version EN 12312-2:2002+A1:2009 DIN EN 12312-3:2009 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles; German version EN 12312-3:2003+A1:2009 DIN EN 12312-4:2009 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges; German version EN 12312-4:2003+A1:2009 DIN EN 12312-5:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment; German version EN 12312-5:2005+A1:2009 DIN EN 12312-6:2009 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment; German version EN 12312-6:2004+A1:2009 DIN EN 12312-7:2009 Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment; German version EN 12312-7:2005+A1:2009 DIN EN 12312-8:2009 Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms; German version EN 12312-8:2005+A1:2009 DIN EN 12312-9:2009 Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders; German version EN 12312-9:2005+A1:2009 DIN EN 12312-10:2009 Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters; German version EN 12312-10:2005+A1:2009 DIN EN 12312-12:2009 Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment; German version EN 12312-12:2002+A1:2009 DIN EN 12312-14:2009 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles; German version EN 12312-14:2006+A1:2009 DIN EN 12312-15:2009 Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors; German version EN 12312-15:2006+A1:2009 DIN EN 12312-17:2009 Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment; German version EN 12312-17:2004+A1:2009 DIN EN 12312-18:2009 Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units; German version EN 12312-18:2005+A1:2009 DIN EN 12312-19:2009 Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions; German version EN 12312-19:2005+A1:2009 DIN EN 12312-20:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units; German version EN 12312-20:2005+A1:2009 DIN EN 14658/A1:2009 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining; English version EN 14658:2005/FprA1:2009 DIN EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2009 DIN EN 15543:2009 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids; German version EN 15543:2008 + AC:2008 DIN EN 12945:2009 Liming materials - Determination of neutralizing value - Titrimetric methods; German version EN 12945:2008+AC:2009 DIN EN 13683:2009 Garden equipment - Integrally powered shredders/chippers - Safety; German version EN 13683:2003+A1:2009 DIN EN 15607:2009 Foodstuffs - Determination of d-biotin by HPLC; German version EN 15607:2009 DIN EN 15652:2009 Foodstuffs - Determination of niacin by HPLC; German version EN 15652:2009 DIN EN 15664-1 Berichtigung 1:2009 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation; German version EN 15664-1:2008-06; Corrigendum to DIN EN 15664-1:2008-06 DIN EN 599-1:2009 Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class; German version EN 599-1:2009 DIN EN 1804-1/A1:2009 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; English version EN 1804-1:2001/prA1:2009 DIN EN 1804-2/A1:2009 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; English version EN 1804-2:2001/FprA1:2009 DIN EN 1804-3/A1:2009 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; English version EN 1804-3:2006/FprA1:2009 DIN EN 13617-1:2009 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units; German version EN 13617-1:2004+A1:2009 DIN EN 10028-2:2009 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2009 DIN EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions; German version EN 10225:2009 DIN EN 1218-2:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains; German version EN 1218-2:2004+A1:2009 DIN EN 1870-3:2009 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches; German version EN 1870-3:2001+A1:2009 DIN EN 1927-2 Berichtigung 1:2009 Qualitative classification of softwood round timber - Part 2: Pines; German version EN 1927-2:2008, Corrigendum to DIN EN 1927-2:2008-06; German version EN 1927-2:2008/AC:2009 DIN EN 820-4:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures; German version EN 820-4:2009 DIN EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures; German version EN 820-5:2009 DIN EN 1071-9:2009 Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain; German version EN 1071-9:2009 DIN EN 623-5:2009 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs; German version EN 623-5:2009 DIN EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements; German version EN 422:2009 DIN EN 12013:2009 Plastics and rubber machines - Internal mixers - Safety requirements; German version EN 12013:2000+A1:2008 DIN EN 15865:2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified); German version EN 15865:2009 DIN EN 1090-1:2009 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components; German version EN 1090-1:2009 DIN EN 1097-8:2009 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value; German version EN 1097-8:2009 DIN EN 12354-5:2009 Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment; German version EN 12354-5:2009 DIN EN 12978:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods; German version EN 12978:2003+A1:2009 DIN EN 13230-1:2009 Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements; German version EN 13230-1:2009 DIN EN 13230-2:2009 Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers; German version EN 13230-2:2009 DIN EN 13230-3:2009 Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers; German version EN 13230-3:2009 DIN EN 13230-5:2009 Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements; German version EN 13230-5:2009 DIN EN 14509 Berichtigung 1:2009 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications; German version EN 14509:2006, Corrigendum to DIN EN 14509:2007-02; German version EN 14509:2006/AC: 2008 DIN EN 15657-1:2009 Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, takingDIN EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety; German version EN 777-1:2009 DIN EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety; German version EN 777-2:2009 DIN EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety; German version EN 777-3:2009 DIN EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety; German version EN 777-4:2009 DIN EN 203-3:2009 Gas heated catering equipment - Part 3: Materials and parts in contact with food and other sanitary aspects; German version EN 203-3:2009 DIN EN 12521:2009 Furniture - Strength, durability and safety - Requirements for domestic tables; German version EN 12521:2009 DIN EN 15181:2009 Measuring method of the energy consumption of gas fired ovens; German version EN 15181:2008 DIN EN 415-1:2009 Packing machines safety - Part 1: Terminology and classification of packing machines and associated equipment; German version EN 415-1:2000+A1:2009 (Foreign Standard)DIN EN 12374:2009 Packaging - Flexible tubes - Terminology; German version EN 12374:2009 (Foreign Standard)DIN EN 14618:2009 Agglomerated stone - Terminology and classification; German version EN 14618:2009 (Foreign Standard)DIN 81208-20:2009 Manoeuvring of ships - Part 20: Rotating arm test (Foreign Standard)DIN 81208-21:2009 Manoeuvring of ships - Part 21: Oblique towing test (Foreign Standard)DIN 81208-22:2009 Manoeuvring of ships - Part 22: Wind tunnel test (Foreign Standard)DIN EN 13795-1:2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Part 1: General requirements for manufacturers, processors and products; German version EN 13795-1:2002+A1:2009 (Foreign Standard)DIN EN 1264 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods; German version EN 1264-2:2008 DIN EN 1264-5:2009 Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output; German version EN 1264-5:2008
DIN Standards : Update & Latest for DIN Standards

Update & Latest for ASTM Standards
ASTM C1277-09 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and FittingsASTM C1540-09 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and FittingsASTM C1695-09 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot ServiceASTM C1721-09 Standard Guide for Petrographic Examination of Dimension StoneASTM D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion TestASTM D1519-95(2009) Standard Test Method for Rubber Chemicals-Melting RangeASTM D1623-09 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular PlasticsASTM D198-09 Standard Test Methods of Static Tests of Lumber in Structural SizesASTM D2672-96a(2009) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement ASTM D2990-09 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of PlasticsASTM D3616-95(2009) Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution ViscosityASTM D4771/D4771M-09 Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture ASTM D4804-09 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid PlasticsASTM D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm FlameASTM D5054-90(2009) Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) AssayASTM D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable PlasticsASTM D5297-95(2009) Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography ASTM D5666-95(2009) Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid ChromatographyASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared SpectrophotometryASTM D5672-09 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection TechniqueASTM D5740-09 Standard Guide for Writing Material Standards in the Classification D4000 FormatASTM D6867-03(2009) Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer TubingASTM D7258-09 Standard Specification for Polymeric PilesASTM E1561-93(2009) Standard Practice for Analysis of Strain Gage Rosette DataASTM E2628-09 Standard Practice for Dosimetry for Radiation ProcessingASTM E2700-09 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays ASTM E2707-09 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement ExposureASTM E2709-09 Standard Practice for Demonstrating Capability to Comply with a Lot Acceptance Procedure ASTM E45-05e3 Standard Test Methods for Determining the Inclusion Content of SteelASTM E521-96(2009) Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle IrradiationASTM E798-96(2009) Standard Practice for Conducting Irradiations at Accelerator-Based Neutron SourcesASTM E821-96(2009) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation ASTM F2170-09 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ ProbesASTM F2264-09 Standard Consumer Safety Specification for Non-Powered ScootersASTM F2343-09 Standard Test Method for Livestock, Meat, and Poultry Evaluation DevicesASTM F564-02(2006)e1 Standard Specification and Test Methods for Metallic Bone StaplesASTM F610/F610M-00a(2009) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion TechniqueASTM A714-99(2009)e1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe ASTM A733-03(2009)e1 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples has been reapproved (with editorial change), ASTM A778-01(2009)e1 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular ProductsASTM A875/A875M-09 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip ProcessASTM A984/A984M-03(2009) Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-WeldedASTM B86-09a Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die CastingsASTM C1055-03(2009) Standard Guide for Heated System Surface Conditions That Produce Contact Burn InjuriesASTM C1203-04(2009) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel ASTM C1243-93(2009) Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc ASTM C1301-95(2009)e1 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)ASTM C1318-95(2009)e1 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)ASTM C1320-05(2009) Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame ConstructionASTM C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber InsulationASTM C1377-97(2009) Standard Test Method for Calibration of Surface/Stress Measuring Devices ASTM C1492-03(2009) Standard Specification for Concrete Roof TileASTM C1513-04(2009)e1 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing ConnectionsASTM C1597M-04(2009)e1 Standard Specification for Gypsum Wallboard (Hard Metric Sizes) has been reapproved (with editorial change), available as C1597M-04(2009)e1 ASTM C224-78(2009) Standard Practice for Sampling Glass Containers has been reapproved, available as C224-78(2009) ASTM C35-01(2009) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster ASTM C472-99(2009) Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum ConcreteASTM C473-09 Standard Test Methods for Physical Testing of Gypsum Panel ProductsASTM C484-99(2009) Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile ASTM C514-04(2009)e1 Standard Specification for Nails for the Application of Gypsum BoardASTM C583-05(2009) Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated TemperaturesASTM C676-04(2009) Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass TablewareASTM C735-04(2009) Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass ContainersASTM C777-04(2009) Standard Test Method for Sulfide Resistance of Ceramic Decorations on GlassASTM C895-87(2009) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic TileASTM C897-05(2009) Standard Specification for Aggregate for Job-Mixed Portland Cement-Based PlastersASTM C927-80(2009) Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels ASTM C929-94(2009) Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless SteelASTM C978-04(2009) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation ProceduresASTM D1459-93(2003) Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation (Withdrawn 2009)ASTM D1510-09b Standard Test Method for Carbon Black—Iodine Adsorption NumberASTM D2222-09 Standard Test Method for Methanol Extract of Vinyl Chloride ResinsASTM D2228-04(2009) Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader MethodASTM D2291-09 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin CompositesASTM D2343-09 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced PlasticsASTM D2734-09 Standard Test Methods for Void Content of Reinforced PlasticsASTM D2798-09a Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal ASTM D2803-09 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on MetalASTM D2862-97(2009) Standard Test Method for Particle Size Distribution of Granular Activated CarbonASTM D3122-95(2009) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and FittingsASTM D3367-09 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal ForceASTM D3647-09 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to CompositionASTM D3675-09a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy SourceASTM D3691/D3691M-09 Standard Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery FabricsASTM D3828-09 Standard Test Methods for Flash Point by Small Scale Closed Cup TesterASTM D4000-09b Standard Classification System for Specifying Plastic MaterialsASTM D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic RodsASTM D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal AnalysisASTM D5039 Standard Test Methods for Identification of Wire Side of Paper (Withdrawn 2009) ASTM D5117-09 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded StockASTM D5207-09 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic MaterialsASTM D5336-09 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending (Withdrawn 2009)ASTM D6265-09 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter TestASTM D6288-09 Standard Practice for Separation and Washing of Recycled Plastics Prior to TestingASTM D6338-09 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test MethodsASTM D6394-09 Standard Specification for Sulfone Plastics (SP)ASTM D6968-03(2009 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission DetectionASTM D7029-09 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]ASTM D710-97(2009)e1 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation ASTM D7566-09 Standard Specification for Aviation Turbine Fuel Containing Synthesized HydrocarbonsASTM D787-09 Standard Specification for Ethyl Cellulose Molding and Extrusion CompoundsASTM D828-92(2002) Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus (Withdrawn 2009)ASTM D919-97(2002) Standard Test Method for Copper Number of Paper and Paperboard (Withdrawn 2009)ASTM E1237-93(2009) Standard Guide for Installing Bonded Resistance Strain GagesASTM E1319-98(2009) Standard Guide for High-Temperature Static Strain MeasurementASTM E1426-98(2009)e1 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual StressASTM E1762-95(2009) Standard Guide for Electronic Authentication of Health Care Information ASTM E1949-03(2009) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain GagesASTM E2015-04(2009) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural ExaminationASTM E2147-01(2009) Standard Specification for Audit and Disclosure Logs for Use in Health Information SystemsASTM E2302-03a(2009) Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable ReflectometerASTM E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages has been reapproved, available as E251-92(2009) ASTM E691-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test MethodASTM E84-09c Standard Test Method for Surface Burning Characteristics of Building Materials ASTM F1365-91(2009) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric SealsASTM F1429-99(2009) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the BellASTM F1545-97(2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and FlangesASTM F1673-04(2009) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage SystemsASTM F1734-03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe ASTM F1865-02a(2009) Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) TubingASTM F2019-03(2009) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) ASTM F2580-09 Standard Test Method for Evaluation of Modular Connection of Proximally Fixed Femoral Hip ProsthesisASTM F2757 Standard Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing. ASTM F2787-09 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection ChambersASTM F876-09 Standard Specification for Crosslinked Polyethylene (PEX) TubingASTM A1064/A1064M-09 Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for ConcreteASTM B117-09 Standard Practice for Operating Salt Spray (Fog) ApparatusASTM D1757-03 Standard Test Method for Sulfate Sulfur in Ash from Coal and Coke (Withdrawn 2009) ASTM D2799-09 Standard Test Method for Microscopical Determination of the Maceral Composition of CoalASTM D4068-09 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment MembranASTM D5128-09 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity ASTM D5543-09 Standard Test Methods for Low-Level Dissolved Oxygen in WaterASTM D5926-09 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing System ASTM D5967-09 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine ASTM D7506/D7506M-09 Standard Test Method for Pocket ReinforcementASTM D7572-09 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process ReleasesASTM D7574-09 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry ASTM E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis ASTM E1732-09 Standard Terminology Relating to Forensic Science has been revised to ASTM E1868-09 Standard Test Method for Loss-On-Drying by ThermogravimetryASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical AnalysisASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers ASTM B127-05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and StripASTM B160-05(2009) Standard Specification for Nickel Rod and BarASTM B161-05(2009) Standard Specification for Nickel Seamless Pipe and TubeASTM B162-99(2009) Standard Specification for Nickel Plate, Sheet, and StripASTM B165-05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and TubeASTM B247M-09 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]ASTM B247-09 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring ForgingsASTM B29-03(2009) Standard Specification for Refined LeadASTM B423-05(2009) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and TubeASTM B424-05(2009) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and StripASTM B425-99(2009) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and BarASTM B443-00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and StripASTM B463-04(2009) Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and StripASTM B464-05(2009) Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy PipeASTM B468-04(2009) Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy TubesASTM B472-04a(2009) Standard Specification for Nickel Alloy Billets and Bars for ReforgingASTM B474-03(2009) Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy PipeASTM B511-01(2009) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and ShapesASTM B512-04(2009) Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and BarsASTM B514-05(2009) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe ASTM B515-95(2009) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy TubesASTM B517-05(2009) Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) PipeASTM B546-04(2009) Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) PipeASTM B704-03(2009) Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy TubesASTM B705-05(2009) Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded PipeASTM B749-03(2009) Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate ProductsASTM C1419-99a(2009) Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's ModulusASTM C179-09 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix SpecimensASTM C181-09 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic RefractoriesASTM C301-04(2009) Standard Test Methods for Vitrified Clay Pipe has been reapproved, available as C301-04(2009) ASTM C425-04(2009) Standard Specification for Compression Joints for Vitrified Clay Pipe and FittingsASTM C4-04(2009) Standard Specification for Clay Drain Tile and Perforated Clay Drain TileASTM C564-09 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and FittingsASTM C877M-02(2009) Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)ASTM C896-04(2009) Standard Terminology Relating to Clay ProductsASTM D121-09a Standard Terminology of Coal and CokeASTM D2063/D2063M-09 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread ClosuresASTM D2414-09a Standard Test Method for Carbon Black—Oil Absorption Number (OAN)ASTM D2862-97(2009)e1 Standard Test Method for Particle Size Distribution of Granular Activated CarbonASTM D3201-08ae1 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based ProductsASTM D3950-09a Standard Specification for Strapping, Nonmetallic (and Joining Methods)ASTM D4775/D4775M-09 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)ASTM D4793-09 Standard Test Method for Sequential Batch Extraction of Waste with WaterASTM D5094/D5094M-09 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style ClosuresASTM D5284-09 Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction FluidASTM D5625-97(2002) Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products (Withdrawn 2009)ASTM D586-97(2002) Standard Test Method for Ash in Pulp, Paper, and Paper Products (Withdrawn 2009)ASTM D6888-09 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric DetectionASTM D7365-09a Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of CyanideASTM D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated CylinderASTM E162-09 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy SourceASTM E2652-09e1 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°CASTM E535-09 Standard Practice for Preparation of Fire-Test-Response Standards ASTM E619-09 Standard Practice for Evaluating Foreign Odors in Paper Packaging ASTM E741-00(2006)e1 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas DilutionASTM E82-09 Standard Test Method for Determining the Orientation of a Metal CrystalASTM F1130-99(2009) Standard Practice for Inspecting the Coating System of a ShipASTM F2057-09a Standard Safety Specification for Chests, Door Chests, and DressersASTM F2125-09 Standard Test Method for Treestand Static Stability and Adherence ASTM F2128-09 Standard Test Method for Treestand Repetitive Loading Capability ASTM F2792-09 Standard Terminology for Additive Manufacturing TechnologiesASTM F875-09 Standard Test Method for Evaluation of Large Area Density and Background on Office CopiersASTM F940-99(2009) Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and ShipbuildingASTM F941-99(2009) Standard Practice for Inspection of Marine Surface Preparation and Coating ApplicationASTM F995-09 Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component DeveloperASTM A240/A240M-09b Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General ApplicationsASTM B710-04(2009) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe ASTM B719-00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar ASTM B723-00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded PipeASTM B725-05(2009) Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe ASTM B729-05(2009) - Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and TubeASTM B798-95(2009) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk ElectrographyASTM B799-95(2009) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide VaporASTM B827-05(2009)e1 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental TestsASTM B834-95(2009) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and PartsASTM C1276-94(2005) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer (Withdrawn 2009)ASTM C1279-09 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat GlassASTM C423-09 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room MethodASTM C443-05ae1 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber GasketsASTM D3306-09 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty ServiceASTM D5639/D5639M-09 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance RequirementsASTM D6890-09 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume ChamberASTM D6910/D6910M-09 Standard Test Method for Marsh Funnel Viscosity of Clay Construction SlurriesASTM D6958-03(2009) Standard Test Methods for Evaluating Side-Bonding Potential of Wood CoatingsASTM D7156-09 D7156-09 - Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel EngineASTM D7332/D7332M-09 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix CompositeASTM D7446-09 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core MaterialsASTM D7452-09 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading ASTM E1836/E1836M-09e1 Standard Practice for Building Floor Area Measurements for Facility ManagementASTM E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings ASTM E722-09e1 Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of ElectronicsASTM A623M-09 Standard Specification for Tin Mill Products, General Requirements [Metric]ASTM A623-09 Standard Specification for Tin Mill Products, General RequirementsASTM A709/A709M-09a Standard Specification for Structural Steel for BridgesASTM B418-09 Standard Specification for Cast and Wrought Galvanic Zinc AnodesASTM B899-09 Standard Terminology Relating to Non-ferrous Metals and AlloysASTM B908-09 Standard Practice for the Use of Color Codes for Zinc Casting Alloy IngotASTM B952/B952M-09 Standard Specification for Zinc Alloys in Ingot Form for Spin CastingASTM C119-08e1 Standard Terminology Relating to Dimension StoneASTM C12-09 Standard Practice for Installing Vitrified Clay Pipe LinesASTM C1353-09 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head AbraserASTM C1496-09 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and FacadesASTM C1515-09 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or ExistingASTM C423-09a Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room MethodASTM C700-09 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and PerforatedASTM D1557-09 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))ASTM D2898-09 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire TestingASTM D3796-09 Standard Practice for Calibration of Type S Pitot TubesASTM D4458-09 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines ASTM D6501-09 Standard Test Method for Phosphonate in BrinesASTM D7469-09 Standard Test Methods for End-Joints in Structural Wood ProductsASTM D7512-09 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical InstrumentationASTM D7535-09 Standard Test Method for Lead-210 in WaterASTM D7550-09 Standard Test Method for Determination of Ammonium, Alkali and Alkaline Earth Metals in Hydrogen and Other Cell Feed Gases by Ion ChromatographyASTM E1457-07e2 Standard Test Method for Measurement of Creep Crack Growth Times in Metals ASTM E1623-09 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)ASTM E1740-09 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone CalorimeterASTM E2061-09a Standard Guide for Fire Hazard Assessment of Rail Transportation VehiclesASTM E2102-09 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant HeaterASTM E2231-09 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning CharacteristicsASTM E2616-09 Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk ConsiderationsASTM E2712-09e1 Standard Test Methods for Forming Superplastic Metallic SheetASTM F1525/F1525M-09 Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical SpillsASTM F1686-09 Standard Guide for Surveys to Document and Assess Oiling Conditions on ShorelinesASTM F1687-09 Standard Guide for Terminology and Indices to Describe Oiling Conditions on ShorelinesASTM F1886/F1886M-09 Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual InspectionASTM F2137-09 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and DevicesASTM F2282(2009) Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical FastenersASTM F2780-09 Standard Guide for Design and Construction of Expanded Metal Security Fences and BarriersASTM F467-08e1 Standard Specification for Nonferrous Nuts for General UseASTM F716-09 Standard Test Methods for Sorbent Performance of Absorbents
Update & Latest for ASTM Standards

Update & Latest for BSI Standards

1,Automotive UpdatesBS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice BS 6739 gives recommendations for, and guidance on, the design for the installation of instrumentation of measurement and control systems in the process industry, and the implementation and commissioning of this installation. It is intended to be used as a manual of good practice on the site and also to assist those who design the installation.
This is a full revision of the standard, and introduces amendments that reflect changes in workplace practice and technology, new recommendations that take into account technology introduced since 1986 and guidance on legislation introduced since this date.Revised standards for automotive fuels Requirements and test methods BS EN 589:2008 Automotive fuels. LPG. Requirements and test methods
BS EN 589:2008 specifies requirements and test methods for marketed and delivered automotive LPG (Liquefied Petroleum Gas.
Revisions to this version of BS EN 589 include the introduction of two new test methods for residues, a revised specification of residue content and a new test method for free water detection.
BS EN 228:2008 Automotive fuels.Unleaded petrol.Requirements and test methods
BS EN 228:2008 specifies requirements and test methods for marketed and delivered unleaded petrol. It is applicable to unleaded petrol for use in petrol engine vehicles designed to run on unleaded petrol.
Several revised test methods have been introduced, incorporating European specific needs, and requirements included in the European Fuels Directive 98/70/EC [1] have been made explicit.BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice BS 6739 gives recommendations for, and guidance on, the design for the installation of instrumentation of measurement and control systems in the process industry, and the implementation and commissioning of this installation. It is intended to be used as a manual of good practice on the site and also to assist those who design the installation.
This is a full revision of the standard, and introduces amendments that reflect changes in workplace practice and technology, new recommendations that take into account technology introduced since 1986 and guidance on legislation introduced since this date.Buy your copyRevised standards for automotive fuels Requirements and test methods BS EN 589:2008 Automotive fuels. LPG. Requirements and test methods
BS EN 589:2008 specifies requirements and test methods for marketed and delivered automotive LPG (Liquefied Petroleum Gas.
Revisions to this version of BS EN 589 include the introduction of two new test methods for residues, a revised specification of residue content and a new test method for free water detection.
BS EN 228:2008 Automotive fuels.Unleaded petrol.Requirements and test methods
BS EN 228:2008 specifies requirements and test methods for marketed and delivered unleaded petrol. It is applicable to unleaded petrol for use in petrol engine vehicles designed to run on unleaded petrol.
Several revised test methods have been introduced, incorporating European specific needs, and requirements included in the European Fuels Directive 98/70/EC [1] have been made explicit.Cleanrooms and Contamination Control Standards & Best Practice Update2nd Annual conference and workshop 23-24 June 2009, Heathrow, London
If you operate, manage, equip, commission or build cleanrooms, attend this annual BSI event to learn about latest legislation, forthcoming changes to cleanroom standards and their impact on your business.
This year the conference will be streamed to tackle the varied issues faced by those different roles in a cleanroom’s life cycle, across electronics, automotive and aerospace.May 2009 — view Automotive Update - May 2009
BS EN 14214:2008 Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods BS ISO 4040:2009 Road vehicles. Location of hand controls, indicators and tell-tales in motor vehicles 2009 conferences - Help us build your conference programme August 2009 — view Automotive Update - August 2009
PD 16949:2009 Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations PD 16949, in conjunction with BS EN ISO 9001:2008 , defines the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products.Risk Management - Implementing Standards, Strategy and a Risk Culture, Conference and workshop (BS 31100:2008 Risk management. Code of practice) BS EN 590:2009 Automotive fuels. Diesel. Requirements and test methods
2,Conferences & Training Updates
OH&S conference
9-10 December, Manchester United FC
Includes a copy of the new BS OHSAS 18002:2008 Accessible Building Design BS 8300:2009 – Improving the Built Environment Coming up 2009 conference programme Accessible Building DesignBS 8300:2009 – Improving the Built Environment 4th Annual BCM conference and workshop12-14 May 2009, London
Improving Business Continuity ManagementBS 25999 and Beyond Life Cycle CostingImplementing UK Guidance to BS ISO 15686-5:2008Efficient Energy ManagementImplementing BS EN 16001 2nd Annual conference and workshop30 September – 1 October 2009, London BS EN 16001 has published -Now attend the conference!Energy Management
Implementing BS EN 16001Preparing for EurocodesManaging the Change Conference and workshop20-21 October 2009, London Life Cycle CostingImplementing the SMLCC Guidance to BS ISO 15686-5:2008 Risk ManagementImplementing Standards, Strategy and a Risk Culture 14-15 October 2009, London
Is your organization facing increased risks? See how BS 31100:2008 Risk management. Code of practice can improve your strategy and processes.Second workshop date announced —Don't miss out on your place!
Efficient Energy Management
Implementing BS EN 16001:2009 Risk ManagementImplementing Standards, Strategy and a Risk CultureConference and workshop14-15 October 2009, LondonSee how BS 31100:2008 Risk management. Code of practice can improve your risk management strategy and processes. 3,Construction & Building (incl. Eurocodes) UpdatesJanuary 2009 — view Construction and the Built Environment Update - January 2009
BS 6644:2005 + Amendment 1:2008 Specification for installation of gas-fired hot water boilers of rated inputs of between 70kW (net) and 1.8 MW (net) (2nd and 3rd family gases) BS 4592-6:2008 Industrial type flooring and stair treads. Glass reinforced plastics (GRP) moulded open mesh gratings and protective barriers. Specification DD 8483:2008 Cranes. Condition monitoring. Specification for data logging equipmentFebruary 2009 — view Construction and the Built Environment Update - February 2009
BS 6375:2009 series - Performance of windows and doors BS 5975:2008 Code of practice for temporary works procedures and the permissible stress design of falsework New standards for noise and vibration controlBS 5228-1:2009 Code of practice for noise and vibration control on construction and open sites. Noise
BS 5228-1 gives recommendations for basic methods of noise control. It applies to work activities and operations that generate significant noise levels and includes industry-specific guidance. February 2009 — view Eurocodes Newsletter - February 2009
BS EN 1995-1-1:2004 + Amendment 1:2008 - Eurocode 5. Design of timber structures. General. Common rules and rules for buildings BS EN 1090-2:2008 - Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures National Annex to BS EN 1993-1-1:2005 - Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildingsMarch 2009 — view Construction and the Built Environment Newsletter - March 2009
BS 8300:2009 Design of buildings and their approaches to meet the needs of disabled people. Code of practice BS 6798:2009 Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kW net BS 5422:2009 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C April 2009 — view Construction and the Built Environment Newsletter - April 2009
BS 8515:2009 Rainwater harvesting systems. Code of practice BS 644:2009 Timber windows. Fully finished factory-assembled windows of various types. Specification BS 7533-13:2009 Pavements constructed with clay, natural stone or concrete pavers. Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers May 2009 — view Construction and the Built Environment Newsletter - May 2009
BS EN 15381:2008 Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays Life Cycle Costing, September 2009, London BS 4449:2005 + Amendment 2:2009 Specification for carbon steel bars for the reinforcement of concrete
BS EN 12350-7:2009 Testing fresh concrete. Air content. Pressure methods Testing hardened concrete – get the latest standards nowThe following are the key standards you need to test concrete:
BS EN 12390-3:2009 Testing hardened concrete. Compressive strength of test specimens
BS EN 12390-5:2009 Testing hardened concrete. Flexural strength of test specimens
BS EN 12390-7:2009 Testing hardened concrete. Density of hardened concrete
BS EN 12390-8:2009 Testing hardened concrete. Depth of penetration of water under pressure
Building of new homes 'will begin within months' BS 6700:2006 + Amendment 1:2009 Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages Specification PD 6689:2009 Surface treatments. Guidance on the use of BS EN 12271 and BS EN 12273 BS 812-124:2009 Testing aggregates. Method for determination of frost heave
PAS 402 Waste resource management. Specification for performance reporting BS 8499:2009 Specification for domestic gas meter boxes and meter bracket Useful standards on copper and steelUseful standards on copper and steel: BS EN 1057:2006 Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications
BS EN 10025-6:2004+Amendment 1:2009Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
BS EN 10088-4:2009Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
BS EN 10088-5:2009Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes Eurocodes 'to be applied in L'Aquila rebuilding' BS EN 1090-1:2009 Execution of steel structures and aluminium structures. Requirements for BS EN 1090-1 Eurocodes Masterclasses
Key standard for gas installersBS 6173:2009 Specification for installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)New steel standards: BS EN 10025-6:2004+Amendment 1:2009 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
BS EN 10343:2009Steels for quenching and tempering for construction purposes. Technical delivery conditions
BS EN 10088-4:2009Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes4,Design & Innovation Updates
2nd Annual sustainable design conference BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice BS 8206-2:2008 Lighting for buildings. Code of practice for daylighting
BS 8887-2:2009 Design for manufacture, assembly, disassembly and end- of-life processing (MADE). Terms and definitions Conference and workshop: Sustainable Design - Designing Sustainable Products and Services New book coming soon: The Essential Guide to Technical Product Specification: Engineering Drawing, Neil Phelps and Colin Simmons :BS 8888:2008 Technical product specification.
BS EN 62430:2009 Environmentally conscious design for electrical and electronic products New conferences for designers and architects: Life Cycle Costing, Fire Safetyhow BS 9999 can help improve the fire safety of a building, right from the initial design stage.
5,Electrical manufacture UpdatesBS EN 61000-3-3:2008 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection BS EN ISO 12718:2008 Non-destructive testing. Eddy current testing. Vocabulary BSI membership - Helping your business prosper
BS EN 60079-14:2008 Explosive atmospheres. Electrical installations design, selection and erection BS EN 60598-1:2008 Luminaires. General requirements and tests BS EN 1715-2:2008 Aluminium and aluminium alloys. Drawing stock. Specific requirements for electrical applications
BS EN 62271-1:2008 High-voltage switchgear and controlgear. Common specifications BS EN 60027-1:2006 + Amendment 2:2007 Letter symbols to be used in electrical technology. General BS 8488-1:2009 Prefabricated wiring systems intended for permanent connection in fixed installations. Specification
Keep elecromagnetic disturbances under control: DD IEC/TS 61000-1-2:2008 Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
Ensure the safety of storage water heaters: BS EN 60335-2-21:2003+Amendment 2:2008 Household and similar electrical appliances. Safety. Particular requirements for storage water heaters
New draft available for public comment: BS 4607-5 Amendment 3. Non-metallic conduits and fittings for electrical installations. Part 5. Specification for rigid conduits, fittings and components of insulating material
BS 8887-2:2009 Design for manufacture, assembly, disassembly and end- of-life processing (MADE). Terms and definitions BS 60335-2 series Household and similar electrical appliances. Safety.Appliances for heating liquids BS EN 60335-2-15:2002+ Amendment 2:2008 Food waste disposers BS EN 60335-2-16:2003+ Amendment 1:2008 Blankets, pads, clothing and similar flexible heating appliances BS EN 60335-2-17:2002+ Amendment 2:2009 Motor-compressors BS EN 60335-2-34:2002+ Amendment 2:2009 Clothes dryers and towel rails BS EN 60335-2-43:2003+ Amendment 2:2008 Flexible sheet heating elementsfor room heating BS EN 60335-2-96:2002+ Amendment 2:2009 BS EN 61800-7-204:2008 Adjustable speed electrical power drive systems. Generic interface and use of profiles for power drive Systems. Profile type 4 specification
BS EN 61000-4-2:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test
BS EN 61000-4-6:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
BS EN 60669-1:2000+A2:2008, BS 3676-1:2000 Switches for household and similar fixed-electrical installations. General requirements Energy-using products: A Guide to the implementation of European Directive 2005/32/EC
BS EN 62430:2009 Environmentally conscious design for electrical and electronic products
BS EN 62271-100:2009 High-voltage switchgear and controlgear. Alternating current circuit-breakers
DD IEC/TS 62564-1:2009 Aerospace qualified electronic component (AQEC). Microcircuits
BS EN 60947-3 Low-voltage switchgear and controlgear -. Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 50523-1 Household appliances interworking. Functional specification and Data structures.BS EN 50523-1:2009 and BS EN 50523-2:2009Household appliances interworking. Functional specification and Data structures. BS EN 50304:2009, BS EN 60350:2009 Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
Electronics expert outlines benefits of EU Directive 2005/32/EC
BS EN 61535:2009 Installation couplers intended for permanent connection in fixed installations
The Essential Guide to Technical Product Specification: Engineering Drawing, Neil Phelps and Colin SimmonsThis new book is an essential guide to the British Standard BS 8888:2008 Technical product specification.
6,Energy UpdatesPopular energy related standards Wind turbines:
BS EN 61400-2:2006 Wind turbines. Design requirements for small wind turbines
BS EN 61400-12-1:2006 Wind turbines. Power performance measurements of electricity producing wind turbines
Fuel cell technologies:
BS EN 62282-2:2004 Fuel cell technologies. Fuel cell modules
BS EN 62282-3-2:2006 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
Solid biofuels:
DD CEN/TS 15359:2006 Solid recovered fuels. Specifications and classes
DD CEN/TS 15234:2006 Solid biofuels. Fuel quality assuranceBS EN 16001:2009 Energy management systems - Requirements with guidance for useEfficient Energy ManagementImplementing BS EN 16001
7,Engineering UpdatesBS 7079:2009 General introduction to standards for preparation of steel substrates before application of paints and related products BS EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions BSI membership
BS EN 60079-14:2008 Explosive atmospheres. Electrical installations design, selection and erection Are the buildings you design and build accessible? Attend the BS 8300 conference for important engineering guidanceAccessible Building DesignBS 8300:2009 - Improving the Built Environment BS EN 485-2:2008 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
BS 8888 is available on CD-ROM Full standard AND all cross referenced documents BS 4311-1:2007 Gauge blocks manufactured to imperial specification. Specification and validation, 2009 Corrigendum Revised standards Petroleum, petrochemicals and natural gas
BS EN 60204-1:2006 + Amendment 1:2009 Safety of machinery. Electrical equipment of machines. General requirements BS EN 10346:2009 Continuously hot-dip coated steel flat products. Technical delivery conditions New conferences: Sustainable Design, Designing Sustainable Products and ServicesNew Book coming soon: The Essential Guide to Technical Product Specification: Engineering Drawing, Neil Phelps and Colin SimmonsBS 8888:2008 Technical product specification BS 10:2009 Specification for flanges and bolting for pipes, valves and fittings BS 8887-2:2009 Design for manufacture, assembly, disassembly and end- of-life processing (MADE). Terms and definitions
BS EN 10208-1:2009 and BS EN 10208-2:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A and class B BS ISO 15786:2008 Technical drawing. Simplified representation and dimensioning of holes Two new electromagnetic compatibility standards now available: BS EN 61000-4-2:2009 and BS EN 61000-4-6:2009
BS EN ISO 13849-1:2008 Safety of machinery. Safety-related parts of control systems. General principles for design BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation. 21st CenturyCleanrooms seminar A one-day seminar to examine the design, construction and operation of the latest cleanrooms.
Smaller manufacturers demonstrating "cautious optimism" Standards for technical delivery conditions of stainless steelBS EN 10088-4:2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
Read more and buy
BS EN 10088-5:2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes.Time to update your BS EN 10028 seriesPart 2: Non-alloy and alloy steels with specified elevated temperature propertiesPart 3: Weldable fine grain steels, normalizedPart 4: Nickel alloy steels with specified low temperature propertiesPart 5: Weldable fine grain steels, thermomechanically rolledPart 6: Weldable fine grain steels, quenched and temperedPart 7: Stainless steels
New book: The Essential Guide to Technical Product Specification: Engineering Drawing Neil Phelps and Colin Simmons BS EN 9100:2009 Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and Quality systems. Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) BS EN 13480-3:2002 + Amendment 3:2009 Metallic industrial piping. Design and calculation
8,Environment UpdatesBS 7592:2008 Sampling for Legionella bacteria in water systems. Code of practice BS 1427:2009 Guide to on-site test methods for the analysis of waters Have you downloaded your complimentary copy of PAS 2050 yet?
PAS 2020:2009 Direct marketing. Environmental performance. Specification New for 2009: Green IT conference Sustainable Design - 2nd Annual conference & workshop
Need help getting to grips with environmental terms? Buy your vocabulary of terms and definitions nowBS ISO 14050:2009Environmental management. Vocabulary Sustainable business task force created We want to know what you think about the new draft of BS 8901
Sustainability conferences Environmental Manufacturing: Conference and workshop BS 8887-2:2009 Design for manufacture, assembly, disassembly and end- of-life processing (MADE). Terms and definitions
BS 2742:2009 Use of the Ringelmann and miniature smoke charts BS ISO 5667-11:2009 Water quality. Sampling. Guidance on sampling of groundwaters Energy-using products: A Guide to the implementation of European Directive 2005/32/EC
BS EN 16001 has published — Now attend the conference! Energy Management - Implementing BS EN 16001 BS EN 16001:2009PAS 402 Waste Resource Management. Specification for Performance Reporting Need help getting to grips with environmental terms? Buy your vocabulary of terms and definitions nowBS ISO 14050:2009Environmental management. VocabularySmart meters 'will encourage energy efficiency' BSI is starting work on new standards for smart metering BS 8499:2009 Specification for domestic gas meter boxes and meter bracket
Efficient EnergyManagement - Implementing BS EN16001: Conference date — 30 September, Extra workshop date — 12 October BS EN 16001:2009 New book: Energy Management Principles and Practice. A Companion to BS EN 16001, Vilnis Vesma Call for experts
9,Fire UpdatesBS 476-10:2009 Fire tests on building materials and structures. Guide to the principles, selection, role and application of fire testing and their outputs Accessible Building Design - BS 8300:2009 – Improving the Built Environment - Conference and workshop BSI membership - Helping your business prosper
BS 9999:2008 Code of practice for fire safety in the design, management and use of buildings BS 476-6 has been amended. Comment on the draft now. BS 476-10:2009 Fire tests on building materials and structures. Guide to the principles, selection, role and application of fire testing and their outputs
2009 Fire brochure now available to downloadFire safety engineering Fire extinguishing systems Fire risk assessment Fire testing Emergency lighting Fire detection systems Fire protection measures Need training on fire safety? Fire safety training courses now booking BS 5266-10:2008 Guide to the design and provision of emergency lighting to reduce the risks from hazards in the event of failure of the normal lighting supply
New book on voice alarm systems – pre-order your copy now The Design and Installation of Voice Alarm Systems. A Guide to BS 5839-8Buy your set of standards for voice alarm systems: BS 5839-1:2002+Amendment 2:2008 Fire detection and fire alarm systems for buildings. Code of practice for system design, installation, commissioning and maintenance BS 5839-8:2008 Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of voice alarm systems
Fire Safety in Buildings The Design, Management and Use of Buildings, Seminar and workshop BS 9999:2008 Code of practice for fire safety in the design, management and use of buildings 3rd BSI Security Summit Incorporating the Electronic Security & Fire Detection and Manned Security conferences and workshops.
New book on voice alarm systems The Design and Installation of Voice Alarm Systems. A Guide to BS 5839-8 BS EN 1366-3:2009 Fire resistance tests for service installations. Penetration seals Comment on the draft of BS 8524-1 Active fire curtain barrier assemblies. Specification
Fire Safety in Buildings The Design, Management and Use of Buildings: Seminar and workshop Download BSI’s latest training brochure Comment on the draft of Specification for distress signal units for the Fire and Rescue Service
BS 5306-3:2009 Fire extinguishing installations and equipment on premises. Commissioning and maintenance of portable fire extinguishers. Code of practice BS EN 12845:2004+Amendment 2:2009 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance Fire Safety Effective Design, Management and Use of BuildingsBS 9999:2008 Code of practice for fire safety in the design, management and use of buildings
Fire Safety - Effective Design, Management and Use of Buildings: Conference and masterclass, 12-13 November 2009, LondonBS 5306-0Fire protection installations and equipment on premises – Part 0: Guide for the selection of installed systems and other fire equipment
BS 8423Fireguards for fires for heating appliances for domestic use - SpecificationComment on drafts of British Standards Emergency lighting and fire safety training courses
10,Healthcare UpdatesMedical Device Directives 93/42/EEC and 90/385/EEC amended by 2007/47/E 2nd Annual cleanrooms conference and workshop - Standards & Best Practice Update BS EN ISO 10993-7:2008 Biological evaluation of medical devices. Ethylene oxide sterilization residuals
Read the latest nanotechnology news on BSI’s newly-launched website Back in Stock — Have you got BS EN 980 on CD yet? BS EN 980 Symbols for use in the labelling of medical devices, BS EN 1041:2008 Information supplied by the manufacturer of medical devices
Register now for BSI's cleanrooms conference and workshop BS EN ISO 14689 Nanotechnology – the latest developments from BSI Get the standards you need to comply with the medical devices DirectivesBS EN 60601-2-29:2008 Medical electrical equipment. Particular requirements for the basic safety and essential performance of radiotherapy simulators
BS EN 60601-2-39:2008 Medical electrical equipment. Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
Significant standards out this month BS EN ISO 15193:2009 BS EN ISO 15194:2009 BS EN ISO 9360-2:2009 2nd Annual conference and workshop - Cleanrooms and Contamination Control Liverpool nanoscientists receive £1.7m healthcare research grant
Significant standards out this month:BS EN ISO 10651-4:2009 Lung ventilators. Particular requirements for operator-powered resuscitators
BS EN ISO 8835-4:2009 Inhalational anaesthesia systems. Anaesthetic vapour delivery devices
BS ISO 13779-1:2008 Implants for surgery. Hydroxyapatite. Ceramic hydroxyapatite
BS ISO 13779-2:2008 Implants for surgery. Hydroxyapatite. Coatings of hydroxyapatite
BS ISO 13779-3:2008 Implants for surgery. Hydroxyapatite. Chemical analysis and characterization of crystallinity and phase purity
Final chance to comment – survey closes in 8 days - Calling users of BS EN ISO 13485 for medical devices Your chance to comment and shape a future standard - PAS 84 Regenerative medicine – Glossary
Standards revised this monthBS EN ISO 10993-1:2009 Biological evaluation of medical devices. Evaluation and testingBS EN ISO 10993-5:2009 Biological evaluation of medical devices. Tests for in vitro cytotoxicity (ISO 10993-5:2009)
BS EN ISO 10993-12:2009 Biological evaluation of medical devices. Sample preparation and reference materials
New technical reports this monthPD ISO/TR 12773-1:2009 Business requirements for health summary records.
PD ISO/TR 12773-2:2009 Business requirements for health summary records. Environmental scan
Your chance to comment and shape a future standard
BS EN ISO 14971:2009 Medical devices. Application of risk management to medical devices Join us at the BSOL Roadshow! New standards this monthBS EN 60601-2-2:2009Medical electrical equipment. Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
BS EN 60601-2-19:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant incubators

BS EN 60601-2-31:2008Medical electrical equipment. Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source

BS EN 60601-2-44:2009
Medical electrical equipment. Particular requirements for basic safety and essential performance of X-ray equipment for computed tomography
BS EN 60601-2-50:2009Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant phototherapy equipment
11,ICT UpdatesBS 10008:2008 Evidential weight and legal admissibility of electronic information. Specification Evidential Weight and Legal Admissibility of Information Stored Electronically, Communicated Electronically, and of Linking Electronic Identity to Documents. Can you tell us how ISO/IEC 27001 can be improved
Coming soon — BS 10012:2009 Data protection. Specification for a personal information management system Coming soon - The essential guide for data protection New conference: learn about the new standard on information management
Just published – Parts 1 and 2 of BS EN 50174 for cabling installation BS EN 50174-1:2009 Information technology. Cabling installation. Installation specification and quality assuranceBS EN 50174-2:2009 Information technology. Cabling installation. Installation planning and practices inside buildingsThe complete ISMS Documentation Toolkit CD-ROM and book. A Manager's Guide to Data Security and ISO 27001/ISO 27002 2009 ICT brochure now available to download
Just published: An overview of information security management systems PD ISO/IEC TR 24714-1:2008: Information technology. Biometrics. Jurisdictional and societal considerations for commercial applications. General guidance Join us at the BSOL Roadshow!BS ISO/IEC 27000:2009 Information technology. Security techniques. Information security management systems. Overview and vocabulary12,Manufacturing UpdatesBS EN 61000-3-3:2008 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection BS EN ISO 12718:2008 Non-destructive testing. Eddy current testing. Vocabulary BSI membership - Helping your business prosper
BS EN 60079-14:2008 Explosive atmospheres. Electrical installations design, selection and erection BS EN 999:1998+Amendment 1:2008 Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body BS EN 485-2:2008 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
BS 8888 is available on CD-ROM Read the latest nanotechnology news on BSI’s newly-launched website BS ISO 815-1:2008 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient and elevated temperatures
BS EN 62271-1:2008 High-voltage switchgear and controlgear. Common specifications BS EN 1011-1:2009 Welding. Recommendations for welding of metallic materials. General guidance for arc welding Cleanrooms and Contamination Control: 2nd annual conference and workshop
BS EN 10346:2006 Continuously hot-dip coated steel flat products. Technical delivery conditions BS EN 60204-1:2006/AMD 1:2009 Safety of machinery. Electrical equipment of machines. General requirements BS EN 10208-1 and BS EN 10208-2 Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A and class B
BS 8887-2:2009 Design for manufacture, assembly, disassembly and end- of-life processing (MADE). Terms and definitions Manufacture electrotechnical products responsibly. Energy-using Products. A guide to the implementation of European Directive 2005/32/EC
Manufacture household electrical appliances? BS EN 378-2:2008 + A1:2009 Refrigerating systems and heat pumps. Safety and environmental requirements. Design, construction, testing, marking and documentation BS EN ISO 13849-1:2008 Safety of machinery. Safety-related parts of control systems. General principles for design
13,Mechanical manufacture UpdatesRevised standards for machinery safety - BS EN ISO 11553 series BS EN ISO 11553-1:2008 Safety of machinery. Laser processing machines. General safety requirementsBS EN ISO 11553-2:2008 Safety of machinery. Laser processing machines. Safety requirements for hand-held laser processing devices
Have your say - BS 8887-2 Design for manufacture, assembly, disassembly and end-of-life processing (MADE). Terms and definitions Need guidance on CE marking? CE Marking for Machinery. A guide to the European Directive
BS EN 999:1998 + Amendment 1:2008 Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body 2nd Annual sustainable design conference Designing Sustainable Products and Services BS EN 747-2:2007 Furniture. Bunk beds and high beds for domestic use. Test methods
BS 8888 is available on CD-ROM: Full standard AND all cross referenced documents BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice BS 148:2009 Reclaimed mineral insulating oil for transformers and switchgear. Specification
BS EN 60204-1 + Amendment 1:2009 Safety of machinery. Electrical equipment of machines. General requirements BS 10:2009 Specification for flanges and bolting for pipes, valves and fittings BS EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
BS 8887-2:2009 Design for manufacture, assembly, disassembly and end- of-life processing (MADE). Terms and definitions New Book coming soon The Essential Guide to Technical Product Specification: Engineering Drawing, Neil Phelps and Colin Simmons BS 6593:1985 + Amendment 1:2009 Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
BS 8887-2:2009 Design for manufacture, assembly, disassembly and end-of-life processing (MADE). Terms and definitions BS EN 10208-1 and BS EN 10208-2 Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A and class B BS ISO 8140:2009 Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises
Smaller manufacturers demonstrating "cautious optimism" BS EN ISO 10644:2009 Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV BS EN 15800:2008 Cylindrical helical springs made of round wire. Quality specifications for cold coiled compression springsJuly 2009 — view Mechanical Manufacture
14,OHS UpdatesBS EN 999:1998 + Amendment 1 - Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body HSE urges firms to follow safe working practices Adventure Activities Overseas - Managing the Risk With the Amended BS 8848 conference and workshopDelegate price includes a copy of BS 8848:2007 + Amendment 1:2009.Need help to improve your health and safety performance? If you do then BS 18004 can help Emergency services hold disaster risk exercise Amended standard BS 8405:2003+Amendment 1:2009 Personal protective equipment against falls from a height. Descender devices. Single-hand operated descender devices for self or assisted rescue
2009 Occupational health and safety brochure now available to downloadBS OHSAS 18001:2007Occupational health and safety management systems. Requirements BS OHSAS 18002:2008Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 BS 18004:2008Guide to achieving effective occupational health and safety performanceNewly amended standard on machinery safety BS EN 60204-1:2006 + Amendment 1:2009Safety of machinery. Electrical equipment of machines. General requirementsYou may also find the following machinery safety standards useful...BS EN 999:1998 + Amendment 1:2008Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body
BS EN 349:1993 + Amendment 1:2008Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
BS EN 415-8:2008Safety of packaging machines. Strapping machines
BS EN ISO 13850:2008Safety of machinery. Emergency stop. Principles for designHave you got your set of food safety documents?BS EN ISO 22000:2005 Food safety management systems. Requirements for any organization in the food chainPAS 220:2008 Prerequisite programmes on food safety for food manufacturing Would you like help with checking if your OH&S management system works effectively? Occupational Health & Safety - A Healthier Workforce, A Healthier Business: 3rd Annual OHS conference and workshop
BS EN 60204-1:2006 + Amendment 1:2009 Safety of machinery. Electrical equipment of machines. General requirements Flu pandemic 'should prompt firms to update business continuity plans' Risk Management - Standards, Strategy and Best Practice: 2nd Annual conference and workshop
BS OHSAS 18002:2008 Occupational health and safety management systems. Guidelines for the implementation of BS OHSAS 18001:2007 3rd Annual OHS conference and workshop, November 2009, London CEDREC Health & Safety CD-ROMBS OHSAS 18002:2008 Occupational health and safety management systems. Guidelines for the implementation of BS OHSAS 18001:2007 OHSAS 18001:2007 Occupational health and safety management systems. Requirements.New machinery safety standards:BS EN ISO 12100-1:2003 + Amendment 1:2009 Safety of machinery. Basic concepts, general principles for design. Basic terminology, methodology
BS EN ISO 12100-2:2003 + Amendment 1:2009 Safety of machinery. Basic concepts, general principles for design. Technical principles
BS EN ISO 13849-1:2008 Safety of machinery. Safety-related parts of control systems. General principles for design
15,Pressure vessels UpdatesBS ISO 16528-1:2007 Boilers and pressure vessels. Performance requirements BS 5422:2009 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C BS 6798:2009 Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
PD 5500 has now published - PD 5500:2009 Specification for unfired fusion welded pressure vessels BS EN ISO 23251:2007+A1:2008 Petroleum, petrochemical and natural gas industries. Pressure-relieving and depressuring systems BS EN 60079-14:2008 Explosive atmospheres. Electrical installations design, selection and erection BS EN 60079-14:2008 BS EN 60079-14
Have you bought your copy of PD 5500? Now available as a PDF download BS EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service Just revised Standards for transportation tanksBS EN 13081:2008 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and couplerBS EN 13082:2008Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve
PD 5500 brochure now availiable for download PD 5500:2009 Specification for unfired fusion welded pressure vessels Environmental Manufacturing Conference and workshop BS EN 60079-10-1:2009 Explosive atmospheres. Classification of areas. Explosive gas atmospheres
BS EN ISO 4126-3:2006 Safety devices for protection against excessive pressure. Safety valves and bursting disc safety devices in combination BS EN ISO 13769:2009 Gas cylinders. Stamp marking BS 8887-2:2009 Design for manufacture, assembly, disassembly and end- of-life processing (MADE). Terms and definitions
Control leaktightness in gasketed circular flange connections BS EN 1591-1:2001 + Amendment 1:2009Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method
BS EN 1591-2:2008Flanges and their joints. Design rules for gasketed circular flange connections. Gasket parameters
Keep hot water safe and efficient in vehicles and boats BS EN 15033:2006Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
Risk Management - Standards, Strategy and Best Practice: 2nd Annual conference and workshopBS 31100:2008 Risk Management. Code of practice
BS EN 10028-1:2007 + Amendent 1:2009 and BS EN 10028-6:2009 BS EN ISO 4126 series: Safety devices for protection against excessive pressure. Energy Management - Implementing BS EN 16001: 2nd Annual conference and workshop, 30 September - 1 October 2009, LondonBS EN 16001:2009
PD 5500:2009 + Amendment 1: Specification for unfired fusion welded pressure vessels BS ISO 5208:2008: Industrial valves. Pressure testing of metallic valves. Energy Management - Implementing BS EN 16001: 2nd Annual conference, 30 September - 1 October 2009, London
16,Quality Management UpdatesNew standard - BS 6739:2009 Code of practice for instrumentation in process control systems: installation design nd practice 4th Annual BCM Conference and Workshop New Specification - PAS 2020:2009 Direct marketing. Environmental performance. Specification
Make sure you have a quality management system in place with BS EN ISO 9001:2008 Quality management systems. Requirements
BS 10012:2009Data protection. Specification for a personal information management system
BS EN ISO 9001:2008: Quality management systems. Requirements Want to get involved? BS 25999 Roadmap for the future: Workshop, 21 September 2009, London
17,Risk & BCM UpdatesBS 25777:2008 Information and communications technology continuity management. Code of practice Norwich Union highlights importance of business continuity planning 4th Annual BCM Conference and WorkshopBS ISO/IEC 38500:2008 Corporate governance of information technology
Complete your set of BCM standards with... BS 25999-1:2006Business continuity management. Code of practice
BS 25999-2:2007Business continuity management. Specification
BS 25777:2008Information and communications technology continuity management. Code of practice
18,Security UpdatesBS ISO/IEC 27005:2008 Information technology. Security techniques. Information security risk management
New PAS 97:2009 A specification for mail screening and security BS 8507-1:2008 Code of practice for close protection services. Services within the United Kingdom
BS 7858:2006+Amendment 2:2009 Security screening of individuals employed in a security environment. Code of practice BS 10012:2009 Data protection. Specification for a personal information management system BS 8517-1:2009 Security dogs. Code of practice for the use of general purpose security dogs
19,Services UpdatesBS 8878 is based on PAS 78:2006, Guide to good practice in commissioning accessible websitesBS EN 15696:2008 Self storage. Specification for self storage services BS ISO 26362:2009 Access panels in market, opinion and social research. Vocabulary and service requirements Conference and workshop: Sustainable Design - Designing Sustainable Products and Services Coming soon — BS 10012:2009 Data protection. Specification for a personal information management system
BS 8507-2:2009 Code of practice for close protection services. Operations outside the United Kingdom PAS 700 Provision of ICT facilities and services in workplaces. Specification BS 8522:2009 Furniture removal activities. Commercial moving services
20,Transport UpdatesBS EN 60079-14:2008 Explosive atmospheres. Electrical installations design, selection and erection 2nd Annual cleanrooms and contamination control conference and workshop - Standards & Best Practice Update BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
BS ISO 30000:2009 Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities 2nd Annual cleanrooms and contamination control conference and workshop - Standards & Best Practice Update BS EN 15194:2009 Cycles. Electrically power assisted cycles. EPAC bicycles
BS EN 9100:2009: Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and Quality systems. Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) PD CEN/TR 14383-7:2009: Prevention of crime. Urban planning and building design. Design and management of public transport facilities Risk Management - Implementing Standards, Strategy and a Risk Culture: Conference and workshop, 14-15 October 2009, Grange City Hotel, London
21,Welding UpdatesBS 4515-1:2009 Specification for welding of steel pipelines on land and offshore. Carbon and carbon manganese steel pipelines BS 499-1:2009 Welding terms and symbols. Glossary for welding, brazing and thermal cutting PD ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
Keep up to date with best practice for arc welding BS EN 1011-1:2009 Welding. Recommendations for welding of metallic materials. General guidance for arc weldingBS EN 1090-2 and BS EN 1090-3 Draft for public comment: BS ISO 10225 Gas welding equipment. Marking for equipment used for gas welding, cutting and allied processes
Stay on-track with railway restoration welding BS EN 15594:2009 Railway applications. Track. Restoration of rails by electric arc welding PD CEN/TR 15068:2009 Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method BS EN ISO 15011-4:2006 + Amendment 1:2008 Health and safety in welding and allied processes. Laboratory method for sampling for fume and gases. Fume data sheets
BS EN ISO 24373:2009 Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials Energy Management - Implementing BS EN 16001, 2nd Annual conference and workshopBS EN 50174-1:2009 Information technology. Cabling installation. Installation specification and quality assuranceBS EN 50174-2:2009 Information technology. Cabling installation. Installation planning and practices inside buildingsBS EN 10225:2009 Weldable structural steels for fixed offshore structures. Technical delivery conditions BS EN 4632-002:2008 Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. Homogeneous assemblies aluminium and aluminium alloysBS EN ISO 2503:2009 Gas welding equipment. Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)BS 4500 Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mmBS EN ISO/IEC 17030:2009 Conformity assessment. General requirements for third-party marks of conformityBS 8902:2009 Responsible sourcing sector certification schemes for construction products. SpecificationBS EN 12390-2:2009 Testing hardened concrete. Making and curing specimens for strength testsBS EN 12350-1:2009 Testing fresh concrete. Sampling BS EN 12504-1:2009 Testing concrete in structures.Cored specimens. Taking, examining and testing in compressionBS 7121-13:2009 Code of practice for safe use of cranes. Hydraulic gantry lifting systemsBS EN 280:2001 + Amendment 2:2009 Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests BS 8901:2009Specification for a sustainability management system for events BS EN 16001:2009Energy management systems. Requirements with guidance for use PAS 402:2009Waste resource management. Specification for performance reporting BS 4500:2009 Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mmBS 1916-1:2009 Part 1,Limits and fits for engineering. Guide to limits and tolerancesBS 1916-2:2009 Part 2,Guide to the selection of fits in BS 1916-1 BS 1916-3:2009 Part 3: Guide to tolerances, limits and fits for large diametersBS EN 1570:1998 + Amendment 2:2009 Safety requirements for lifting tables BS EN 10225:2009 Weldable structural steels for fixed offshore structures. Technical delivery conditions BS EN ISO 8359:2009 Oxygen concentrators for medical use. Safety requirementsBS EN ISO 8185:2009 Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systemsBS 7121-13:2009 Code of practice for safe use of cranes. Hydraulic gantry lifting systemsBS EN 280:2001 + Amendment 2:2009 Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and testsBS EN 12717:2001 Amendment 1:2009 Safety of machine tools. Drilling machinesBS EN 1570:1998 + Amendment 2:2009 Safety requirements for lifting tables BS EN 61000-3-2:2006 + Amendment 2:2009 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase)BS EN 61558-1:2005 + Amendment 1:2009 Safety of power transformers, power supplies, reactors and similar products. General requirements and testsBS EN 50174-1:2009 Information technology. Cabling installation. Installation specification and quality assuranceBS EN ISO 9004 Quality management systems. Guidelines for performance improvementsPD 5500:2009 + Amendment 1:2009 Specification for unfired fusion welded pressure vesselsBS EN 10028 Series Flat products made of steels for pressure purposesPP 1990:2007 Extracts from the Structural Eurocodes for students of structural design
Update & Latest for BSI Standards

Update & Latest for IEC Standards

IEC 60601-2-13 Ed. 3.1 en:2009 Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems IEC 62083 Ed. 2.0 b:2009 Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems IEC/TR 80002-1 Ed. 1.0 en:2009 Medical device software - Part 1: Guidance on the application of ISO 14971 to medical device software IEC 60335-2-13 Ed. 5.1 b:2004 "Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances" IEC 60335-2-41 Ed. 3.1 b:2004 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps IEC 60335-2-59 Amd.2 Ed. 3.0 b:2009 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers IEC 60335-2-74 Amd.2 Ed. 2.0 b:2009 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters IEC 61140 Ed. 3.1 b:2009 Protection against electric shock - Common aspects for installation and equipment IEC 60318-1 Ed. 2.0 b:2009 Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones IEC 62110 Ed. 1.0 b:2009 Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure IEC 60626-2 Ed. 3.0 b:2009 Combined flexible materials for electrical insulation - Part 2: Methods of test IEC 61010-2-081 Ed. 1.1 b:2009 "Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes" IEC 60335-2-40 Ed. 4.2 b:2005 "Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers" IEC 62271-SER Ed. 1.0 b:2009 High-voltage switchgear and controlgear - ALL PARTS IEC 60470 Ed. 2.0 b:1999 High-voltage alternating current contactors and contactor-based motor-starters IEC 60626-1 Ed. 3.0 b:2009 Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements IEC/PAS 62026-7 Ed. 1.0 en:2009 Low-voltage switchgear and controlgear - Controller-Device Interfaces (CDIs) - Part 7: CompoNet IEC 60371-3-4 Amd.1 Ed. 1.0 b:2006 Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder IEC 60371-3-6 Amd.1 Ed. 1.0 b:2006 Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder IEC 60371-3-7 Amd.1 Ed. 1.0 b:2006 Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping IEC 60371-3-8 Amd.1 Ed. 1.0 b:2007 Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flamme-resistant security cables IEC 60371-3-9 Amd.1 Ed. 1.0 b:2007 Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite IEC 60401-2 Ed. 2.0 b:2009 Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions IEC 60502-1 Amd.1 Ed. 2.0 b:2009 "Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)" IEC 60502-SER Ed. 1.0 b:2009 "Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS" IEC 60819-1 Ed. 3.0 b:2009 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements IEC 60893-3-6 Amd.1 Ed. 2.0 b:2009 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins IEC 60893-3-7 Amd.1 Ed. 2.0 b:2009 Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins IEC 60947-4-1 Ed. 3.0 b:2009 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters IEC/TR 62271-301 Ed. 2.0 b:2009 High-voltage switchgear and controlgear - Part 301: Dimensional standardisation of high-voltage terminals IEC/TR 62602 Ed. 1.0 b:2009 Conductors of insulated cables - Data for AWG and KCMIL sizes IEC/TS 60034-24 Ed. 1.0 b:2009 Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide IEC/TS 62610-1 Ed. 1.0 en:2009 Mechanical structures for electronic equipment - Thermal management for cabinets in accordance wit IEC 60297 and IEC 60917 series - Part 1: Design guide: Interface dimension and provision for thermoelectrical cooling systems (Peltier effect) IEC 61000-4-16 Amd.2 Ed. 1.0 b:2009 "Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz" IEC 61000-4-8 Ed. 2.0 b:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test IEC 61753-085-2 Ed. 1.0 b:2008 Fibre optic interconnecting devices and passive components performance standard - Part 085-2: Non-connectorized single-mode pigtailed CWDM devices for category C - Controlled environment IEC/TS 61000-5-8 Ed. 1.0 en:2009 Electromagnetic compatibility (EMC) - Part 5-8: Installation and mitigation guidelines - HEMP protection methods for the distributed infrastructure IEC 61000-3-5 Ed. 2.0 b Cor.1:2009 Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A IEC 61968-9 Ed. 1.0 en:2009 Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control IEC/TS 62592 Ed. 1.0 en:2009 Encoding guidelines for portable multimedia CE products using MP4 file format with AVC video codec and AAC audio codec IEC 60335-2-73 Amd.2 Ed. 2.0 b:2009 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters IEC 60335-2-36 Ed. 5.1 b:2004 "Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements" IEC 60335-2-39 Ed. 5.1 b:2004 Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans IEC 60335-2-42 Ed. 5.1 b:2009 "Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens" IEC 62115 Ed. 1.1 b:2004 Electric toys - Safety IEC 60436 Amd.1 Ed. 3.0 en:2009 Amendment 1 - Electric dishwashers for household use - Methods for measuring the performance IEC 61188-5-3 Ed. 1.0 b:2007 Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides IECEX 05 Ed. 1.0 en:2009 IECEx Scheme for Certification of Personnel Competencies for Explosive Atmospheres - Rules of Procedure
Update & Latest for IEC Standards

Update & Latest for ISO Standards
ISO 4720:2009 Essential oils - Nomenclature ISO 23185:2009 Assessment and benchmarking of terminological resources - General concepts, principles and requirements ISO 4378-1:2009 Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties ISO 4378-2:2009 Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear ISO 4378-3:2009 Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication ISO 4378-4:2009 Plain bearings - Terms, definitions, classification and symbols - Part 4: Basic symbols ISO 4378-5:2009 Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols ISO 10002/Cor1:2009 Quality management - Customer satisfaction - Guidelines for complaints handling in organizations - Corrigendum 1 ISO 3951-2/Amd1:2009 Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics - Amendment 1 IEC/FDIS 31010 Risk management - Risk assessment techniques ISO 14813-6:2009 Intelligent transport systems - Reference model architecture(s) for the ITS sector - Part 6: Data presentation in ASN.1 ISO/TS 17574:2009 Electronic fee collection - Guidelines for security protection profiles ISO 25424:2009 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices ISO 14161:2009 Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results ISO 21072-2:2009 Ships and marine technology - Marine environment protection: performance testing of oil skimmers - Part 2: Static water conditions ISO 5667-15:2009 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples ISO 23161:2009 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method ISO 18857-2:2009 Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity ISO/IEC Guide 98-1:2009 Uncertainty of measurement - Part 1: Introduction to the expression of uncertainty in measurement ISO 3548-2:2009 Plain bearings - Thin-walled half bearings with or without flange - Part 2: Measurement of wall thickness and flange thickness ISO 20806:2009 Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors ISO 8434-6:2009 Metallic tube connections for fluid power and general use - Part 6: 60 degree cone connectors with or without O-ring ISO 8521:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength ISO 3949:2009 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity ISO 13479:2009 Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes ISO 10928:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use ISO 18435-1:2009 Industrial automation systems and integration - Diagnostics, capability assessment and maintenance applications integration - Part 1: Overview and general requirements ISO 10303-235:2009 Industrial automation systems and integration - Product data representation and exchange - Part 235: Application protocol: Engineering properties for product design and verification ISO 10643:2009 Dimensions of accessories for cutter arbors with parallel key and tenon drive ISO 9463:2009 Nuclear energy - Nuclear fuel technology - Determination of plutonium in nitric acid solutions by spectrophotometry ISO 12967-1:2009 Health informatics - Service architecture - Part 1: Enterprise viewpoint ISO 12967-2:2009 Health informatics - Service architecture - Part 2: Information viewpoint ISO 12967-3:2009 Health informatics - Service architecture - Part 3: Computational viewpoint ISO 19144-1:2009 Geographic information - Classification systems - Part 1: Classification system structure ISO 19111-2:2009 Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values ISO 25720:2009 Health informatics - Genomic Sequence Variation Markup Language (GSVML) ISO/TR 25257:2009 Health informatics - Business requirements for an international coding system for medicinal products ISO 24097-1:2009 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery - Part 1: Realization of interoperable web services ISO 22179:2009 Intelligent transport systems - Full speed range adaptive cruise control (FSRA) systems - Performance requirements and test procedures ISO 11012:2009 Heavy commercial vehicles and buses - Open-loop test methods for the quantification of on-centre handling - Weave test and transition test ISO 10088:2009 Small craft - Permanently installed fuel systems ISO 2563:2009 Aircraft ducting and piping - Profile dimensions for flanges of V-band couplings ISO 22915-21:2009 Industrial trucks - Verification of stability - Part 21: Order-picking trucks with operator position elevating above 1 200 mm ISO 22915-7:2009 Industrial trucks - Verification of stability - Part 7: Bidirectional and multidirectional trucks ISO 14401-1:2009 Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 1: Test methods ISO 14401-2:2009 Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 2: Performance criteria ISO 4918:2009 Resilient, textile and laminate floor coverings - Castor chair test ISO 105-G02/Cor2:2009 Textiles - Tests for colour fastness - Part G02: Colour fastness to burnt-gas fumes - Corrigendum ISO 24631-1:2009 Radiofrequency identification of animals - Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code) ISO 24631-2:2009 Radiofrequency identification of animals - Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785 ISO 24631-3:2009 Radiofrequency identification of animals - Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785 ISO 24631-4:2009 Radiofrequency identification of animals - Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785 ISO 4254-6:2009 Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors ISO 28139:2009 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements ISO 1871:2009 Food and feed products - General guidelines for the determination of nitrogen by the Kjeldahl method ISO 11053:2009 Vegetable fats and oils - Determination of cocoa butter equivalents in milk chocolate ISO 28198:2009 Vegetable fats and oils - Determination of toluene insoluble matter ISO/TR 26369:2009 Cosmetics - Sun protection test methods - Review and evaluation of methods to assess the photoprotection of sun protection products ISO 17824:2009 Petroleum and natural gas industries - Downhole equipment - Sand screens ISO 11158:2009 Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HV and HG ISO 6892-1:2009 Metallic materials - Tensile testing - Part 1: Method of test at room temperature ISO 18352:2009 Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level ISO 1658:2009 Natural rubber (NR) - Evaluation procedure ISO 2006-2:2009 Rubber latex, synthetic - Determination of mechanical stability - Part 2: Moderate-speed method under load ISO 4662:2009 Rubber, vulcanized or thermoplastic - Determination of rebound resilience ISO 2006-1:2009 Rubber latex, synthetic - Determination of mechanical stability - Part 1: High-speed method ISO 2476:2009 Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures ISO 2322:2009 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification ISO 25518:2009 Single-use rubber gloves for general applications - Specification ISO 21627-1:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine ISO 21627-2:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine ISO 21627-3:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine ISO 11093-5:2009 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation ISO 28199-1:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels ISO 28199-2:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling ISO 28199-3:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power ISO/IEC TR 14165-312:2009 Information technology - Fibre Channel - Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553) ISO/IEC 9594-9:2008 Information technology - Open Systems Interconnection - The Directory: Replication ISO/IEC 9834-1:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: General procedures and top arcs of the International Object Identifier treeISO/IEC 29199-2:2009 JPEG XR image coding system - Part 2: Image coding specification ISO/IEC 9834-3:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-TISO/IEC 9834-7:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Joint ISO and ITU-T Registration of International Organizations ISO/IEC 9834-8:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Generation and registration of Universally Unique Identifiers (UUIDs) and their use as ASN.1 Object Identifier components ISO/IEC 24713-3:2009 Information technology - Biometric profiles for interoperability and data interchange - Part 3: Biometrics-based verification and identification of seafarers ISO/IEC 23000-4/Amd2:2009 - Amendment 2: Conformance and reference software for protected musical slide show application format ISO/IEC 14496-3:2009 Information technology - Coding of audio-visual objects - Part 3: Audio ISO/IEC 15459-8:2009 Information technology - Unique identifiers - Part 8: Grouping of transport units ISO/IEC 15963:2009 Information technology - Radio frequency identification for item management - Unique identification for RF tags ISO/IEC 11770-2/Cor1:2009 Information technology - Security techniques - Key management - Part 2: Mechanisms using symmetric techniques - Corrigendum 1 ISO/IEC 11770-3/Cor1:2009 Information technology - Security techniques - Key management - Part 3: Mechanisms using asymmetric techniques - Corrigendum 1 ISO/IEC 11770-4/Cor1:2009 Information technology - Security techniques - Key management - Part 4: Mechanisms based on weak secrets - Corrigendum 1 ISO/IEC 9798-3/Cor1:2009 Information technology - Security techniques - Entity authentication mechanisms - Part 3: Entity authentication using a public key algorithm - Corrigendum ISO/IEC 9798-4/Cor1:2009 Information technology - Security techniques - Entity authentication - Part 4: Mechanisms using a cryptographic check function - Corrigendum ISO/IEC 9798-6/Cor1:2009 Corrigendum ISO/IEC 1539-1/Cor4:2009 Information technology - Programming languages - Fortran - Part 1: Base language - CorrigendumISO/IEC 9945:2009 Information technology - Portable Operating System Interface (POSIXr) Base Specifications, Issue 7 ISO/IEC 15444-4/Cor1:2009 Information technology - JPEG 2000 image coding system: Conformance testing - Corrigendum 1 ISO/IEC 23003-1/Amd2/Cor1:2009 Information technology - MPEG audio technologies - Part 1: MPEG Surround - Amendment 2:Reference software - Corrigendum 1 ISO/IEC 18000-2:2009 Information technology - Radio frequency identification for item management - Part 2: Parameters for air interface communications below 135 kHz ISO/IEC 24739-1:2009 Information technology - AT Attachment with Packet Interface - 7 - Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1) ISO/IEC 14651/Amd1:2009 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering - Amendment 1 ISO/IEC 14496-12/Cor3:2009 Corrigendum ISO/IEC 15444-12/Cor3:2009 Corrigendum ISO/IEC 23003-1/Cor2:2009 Corrigendum ISO/IEC 24702/Amd1:2009 Information technology - Generic cabling - Industrial premises - Amendment 1 ISO 7131:2009 Earth-moving machinery - Loaders - Terminology and commercial specifications ISO/DIS 26000 Guidance on social responsibility ISO 22514-1:2009 Statistical methods in process management - Capability and performance - Part 1: General principles and concepts ISO 24978:2009 Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures ISO 9362:2009 Banking - Banking telecommunication messages - Business identifier code (BIC) ISO 80601-2-56:2009 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement ISO 8612:2009 Ophthalmic instruments - Tonometers ISO 21987:2009 Ophthalmic optics - Mounted spectacle lenses ISO 21969:2009 High-pressure flexible connections for use with medical gas systems ISO 11980:2009 Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations ISO 10993-1:2009 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices ISO/TS 21220:2009 Particulate air filters for general ventilation - Determination of filtration performance ISO 16000-17/Cor1:2009 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method - Corrigendum 1 ISO 15011-3:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding ISO 15011-2:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc wel ISO 15011-1:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis ISO/TS 10832:2009 Soil quality - Effects of pollutants on mycorrhizal fungi - Spore germination test ISO/TR 21808:2009 Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters ISO 7919-4:2009 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings ISO 10816-4:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings ISO 7919-2:2009 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min ISO 10816-2:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min ISO 10816-1/Amd1:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines - Amendment 1 ISO/TR 1281-2/Cor1:2009 Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses - Corrigendum 1 ISO/TR 1281-1/Cor1:2009 Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life - Corrigendum 1 ISO 5753-1:2009 Rolling bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-port directional flow-control valves ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity ISO 4395:2009 Fluid power systems and components - Cylinder piston rod end types and dimensions ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing ISO/TR 20173:2009 Welding - Grouping systems for materials - American materials ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification ISO/TS 22224:2009 Health informatics - Electronic reporting of adverse drug reactions ISO 15782-1:2009 Certificate management for financial services - Part 1: Public key certificates ISO/PAS 28005-2:2009 Security management systems for the supply chain - Electronic port clearance (EPC) - Part 2: Core data elements ISO/TR 15801:2009 Document management - Information stored electronically - Recommendations for trustworthiness and reliability ISO 3780:2009 Road vehicles - World manufacturer identifier (WMI) code ISO 7612:2009 Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions ISO 3779:2009 Road vehicles - Vehicle identification number (VIN) - Content and structure ISO/TR 10603:1992 Road vehicles - Legal situation concerning lighting and light-signalling devices ISO 30003:2009 Ships and marine technology - Ship recycling management systems - Requirements for bodies providing audit and certification of ship recycling management ISO 10596:2009 Ships and marine technology - Marine wind vane and anemometers ISO 105-B08/Amd1:2009 Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 - Amendment 1 ISO 28499-1:2009 Buffalo hides and buffalo calf skins - Part 1: Description of defects ISO 28499-2:2009 Buffalo hides and buffalo calf skins - Part 2: Grading on the basis of mass and size ISO 28499-3:2009 Buffalo hides and buffalo calf skins - Part 3: Grading on the basis of defects ISO 105-J03:2009 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences ISO 18696/Cor1:2009 Corrigendum ISO 1833-20:2009 Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) ISO 27587:2009 Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries ISO 20369:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content ISO 3308/Amd1:2009 Tobacco and tobacco products - Routine analytical cigarette-smoking machine - Definitions, standard conditions and auxiliary equipment - Amendment 1 ISO 3400/Amd1:2009 Tobacco and tobacco products - Determination of alkaloids in cigarette smoke condensates - Spectrophotometric method - Amendment 1 ISO 8454/Amd1:2009 Cigarettes - Determination of carbon monoxide in the vapour phase of smoke (NDIR method) - Amendment 1 ISO 24557:2009 Pulses - Determination of moisture content - Air-oven method ISO 11865:2009 Instant whole milk powder - Determination of white flecks number ISO 11870:2009 Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods ISO 12080-1:2009 Dried skimmed milk - Determination of vitamin A content - Part 1: Colorimetric method ISO 12080-2:2009 Dried skimmed milk - Determination of vitamin A content - Part 2: Method using high-performance liquid chromatography ISO 14378:2009 Milk and dried milk - Determination of iodide content - Method using high-performance liquid chromatography ISO 8196-1:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 1: Analytical attributes of alternative methods ISO 8196-2:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 2: Calibration and quality control in the dairy laboratory ISO 8196-3:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis ISO/TS 16634-2:2009 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products ISO 927:2009 Spices and condiments - Determination of extraneous matter and foreign matter content ISO 3890-1:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 1: General considerations and extraction methods ISO 3890-2:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 2: Test methods for crude extract purification and confirmation ISO/TR 16268:2009 Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation ISO 6145-9:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method ISO 7404-2:2009 Methods for the petrographic analysis of coals - Part 2: Methods of preparing coal samples ISO 7404-3:2009 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition ISO 7404-5:2009 Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite ISO 28300/Cor1:2009 Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks - Corrigendum 1 ISO 12917-1/Cor1:2009 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manual methods - Corrigendum 1 ISO 10407-2/Cor1:2009 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Inspection and classification of used drill stem elements - Corrigendum 1 ISO 15156-1:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials ISO 15156-2:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons ISO 15156-3:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys ISO 3907:2009 Hardmetals - Determination of total carbon - Gravimetric method ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method ISO/TR 10809-1:2009 Cast irons - Part 1: Materials and properties for design ISO 20501/Cor1:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data - Corrigendum 1 ISO 26842-1:2009 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments ISO 26842-2:2009 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2: Resistance to delamination in severe environments ISO 28078-2:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties ISO 28078-1:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles ISO 2470-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness) ISO 5631-1:2009 Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2 degrees) ISO 787-7:2009 General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure ISO 7579:2009 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods ISO 21873-2:2009 Building construction machinery and equipment - Mobile crushers - Part 2: Safety requirements ISO 29805:2009 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes ISO 24011:2009 Resilient floor coverings - Specification for plain and decorative linoleum ISO/IEC 15444-4/Cor1:2009 Information technology - JPEG 2000 image coding system: Conformance testing - Corrigendum 1 ISO/IEC 23003-1/Amd2/Cor1:2009 Information technology - MPEG audio technologies - Part 1: MPEG Surround - Amendment 2:Reference software - Corrigendum 1 ISO/IEC 18000-2:2009 Information technology - Radio frequency identification for item management - Part 2: Parameters for air interface communications below 135 kHz ISO/IEC 24739-1:2009 Information technology - AT Attachment with Packet Interface - 7 - Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1) ISO/IEC 14651/Amd1:2009 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering - Amendment 1 ISO/IEC 14496-12/Cor3:2009 Corrigendum ISO/IEC 15444-12/Cor3:2009 Corrigendum ISO/IEC 23003-1/Cor2:2009 Corrigendum ISO/IEC 24702/Amd1:2009 Information technology - Generic cabling - Industrial premises - Amendment 1 ISO/IEC 26513:2009 Systems and software engineering - Requirements for testers and reviewers of user documentation ISO/IEC 19794-2/Cor1:2009 Corrigendum ISO/IEC 9995-7:2009 Information technology - Keyboard layouts for text and office systems - Part 7: Symbols used to represent functions ISO/IEC 9995-8:2009 Information technology - Keyboard layouts for text and office systems - Part 8: Allocation of letters to the keys of a numeric keypad ISO/IEC 9995-5:2009 Information technology - Keyboard layouts for text and office systems - Part 5: Editing and function section ISO/IEC 9995-4:2009 Information technology - Keyboard layouts for text and office systems - Part 4: Numeric section ISO/IEC 9995-2:2009 Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric section ISO/IEC 9995-1:2009 Information technology - Keyboard layouts for text and office systems - Part 1: General principles governing keyboard layouts ISO/IEC 9594-3/Cor2:2009 Extensions to Support Paged Result on the DSP - Corrigendum ISO/IEC 9594-6/Cor2:2009 Extensions to Support Paged Result on the DSP - Corrigendum ISO/IEC 14496-5/Amd24:2009 Reference software for MPEG-4 - Amendment 2: Reference software for AAC-ELD ISO/IEC 14496-5/Amd22:2009 Reference software for MPEG-4 - Amendment 2: Reference software for 3D Graphics Compression Model (3DGCM) ISO/IEC TR 20000-3:2009 Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 ISO/IEC 10646/Amd6:2009 - Amendment 6: Bamum, Javanese, Lisu, Meetei Mayek, Samaritan, and other characters ISO/IEC 11693-2:2009 Identification cards - Optical memory cards - Part 2: Co-existence of optical memory with other machine readable technologiesISO 7240-18:2009 Fire detection and alarm systems - Part 18: Input/output devicesISO 3822-3/Amd1:2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1ISO 702-2/Cor1:2009 Machine tools - Spindle noses and face plates - Sizes for interchangeability - Part 2: Camlock type - Corrigendum 1ISO/TS 22224:2009 Health informatics - Electronic reporting of adverse drug reactionsISO 19126:2009 Geographic information - Feature concept dictionaries and registersISO 15511:2009 Information and documentation - International standard identifier for libraries and related organizations (ISIL) ISO 9100-3/Cor1:2009 Glass containers - Vacuum lug finishes - Part 3: 38 regular - Corrigendum 1ISO 9100-4/Cor1:2009 Glass containers - Vacuum lug finishes - Part 4: 38 medium - Corrigendum 1ISO 22958/Cor1:2009 Textiles - Water resistance - Rain tests: exposure to a horizontal water spray - Corrigendum 1ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devicesISO/TR 4277:2009 Cryolite, natural and artificial - Conventional test for evaluation of free fluorides contentISO 13503-2/Amd1:2009 Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppand specificationISO/IEC 19776-1:2009 Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings - Part 1: Extensible Markup Language (XML) encodingISO/IEC 13818-1/Amd3:2009 Information technology - Generic coding of moving pictures and associated audio information: Systems - Amendment 3: Transport of Scalable Video
Update & Latest for ISO Standards

SAE Standards >>Update & Latest for SAE Standards
Update & Latest for SAE Standards
SAE AMS-R-83412-1999 (SAE AMS-R-83412-1999) Rubber, Ethylene-Propylene, Hydrazine Resistant
SAE ARP 4101/1-1990 (SAE ARP4101/1-1990) Seats and Restraint Systems for the Flight Deck ( Reaffirmed: Apr 1999 Jul 2007 )
SAE ARP 4101/2-1989 (SAE ARP4101/2-1989) Pilot Visibility from the Flight Deck ( Reaffirmed: May 1994 Feb 2003 )
SAE ARP 4101/3-1992 (SAE ARP4101/3-1992) Crew Rest Facilities ( Reaffirmed: Dec 2006 )
SAE ARP 4101/4-1988 (SAE ARP4101/4-1988) Flight Deck Environment ( Reaffirmed: May 1994 Feb 2003 )
SAE ARP 4101/5-1989 (SAE ARP4101/5-1989) Aircraft Circuit Breaker and Fuse Arrangement ( Reaffirmed: May 1994 Jul 2007 )
SAE ARP 4101/6-1988 (SAE ARP4101/6-1988) Stowage of Flight Crew's Survival Emergency and Miscellaneous Equipment ( Reaffirmed: Jul 1993 Jul 2007 )
SAE ARP 4101/7-1988 (SAE ARP4101/7-1988) Flight Deck Escape Provisions for Transport Aircraft ( Reaffirmed: May 1994 Oct 2000 Jul 2007 )
SAE ARP 4101/8-1988 (SAE ARP4101/8-1988) Flight Deck Interior Doors for Transport Aircraft ( Reaffirmed: May 1994 Oct 2000 Jul 2007 )
SAE ARP 4101/9-1988 (SAE ARP4101/9-1988) Crew Safety Provisions for Cargo Aircraft ( Reaffirmed: Jul 1993 Jul 2007 )
SAE ARP 4162A-1998 (SAE ARP4162A-1998) Balancing Machine Proving Rotors
SAE ARP 4163-2003 (SAE ARP4163-2003) Balancing Machines: Tooling Design Criteria
SAE ARP 4166-1990 (SAE ARP4166-1990) Cover, Shipping and Storage (Flexible, Reusable, Water-Vaporproof) ( Reaffirmed: Oct 1995 Oct 2005 )
SAE ARP 4168A-2004 (SAE ARP4168A-2004) Night Vision Goggle (NVG) Compatible Light Sources
SAE ARP 4169A-2006 (SAE ARP4169A-2006) Night Vision Goggle (NVG) Filters
SAE ARP 416A-2001 (SAE ARP416A-2001) Directional Indicating System (Turbine Powered Subsonic Aircraft) ( Reaffirmed: Feb 2008 )
SAE ARP 4171A-1990 (SAE ARP4171A-1990) Safety Considerations of Food and Beverage Service Carts ( Reaffirmed: Mar 2000 )
SAE ARP 4191D-2003 (SAE ARP4191D-2003) Gas Turbine Engine Performance Presentation for Digital Computer Programs Using Fortran 77 ( Cancelled: May 2009 )
SAE ARP 4192A-1991 (SAE ARP4192A-1991) Passenger Safety Video Briefings ( Cancelled: Nov 2003 )
SAE MA 1547A-1989 (SAE MA1547A-1989) Wrenches, Twelve Spline, Metric ( Reaffirmed: Jul 1991 Oct 1995 )
SAE MA 1586A-1987 (SAE MA1586A-1987) Wrench Configuration, 12 Spline Drive, Metric ( Reaffirmed: Feb 1992 )
SAE J 1450-2001 (SAE J1450-2001) Air Brake Actuator Diaphragm Test Procedure ( Cancelled: May 2009 )
SAE J 2412-2004 (SAE J2412-2004) Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
Update & Latest for SAE Standards
Update & Latest for IEEE Standards

IEEE C57.12.24-2009 IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below
IEEE 1636-2009 IEEE trial-use standard for software interface for maintenance information collection and analysis (SIMICA)
IEEE 841-2009 IEEE Standard for Petroleum and Chemical Industry-Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including 370 kW (500 hp)
IEEE 802.16j-2009 IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Broadband Wireless Access Systems Amendment 1: Multiple Relay Specification
IEEE 802.1Qaw-2009 IEEE Standard for local and metropolitan area networks - Virtual Bridged Local Area Networks Amendment 9: Management of Data Driven and Data Dependent Connectivity Faults
IEEE 1613-2009 IEEE standard environmental and testing requirements for communications networking devices installed in electric power substations
IEEE 1559-2009 IEEE Standard for Inertial Systems Terminology
Update & Latest for IEEE Standards

Update & Latest for JIS Standards

JIS S 3200-7:2004/AMENDMENT 1:2009 Equipment for water supply service -- Test methods of effect to water quality (Amendment 1) (Foreign Standard)
JIS T 8125-2:2009 Protective clothing for users of hand-held chain-saws -- Part 2: Test methods and performance requirements for leg protectors (Foreign Standard)
JIS T 8125-3:2009 Protective clothing for users of hand-held chain-saws -- Part 3: Test methods for footwear (Foreign Standard)
JIS Z 8730:2009 Colour specification -- Colour differences of object colours (Foreign Standard)
JIS C 60068-2-80:2009 Environmental testing -- Part 2-80: Tests -- Test Fi: Vibration -- Mixed mode (Foreign Standard)
JIS B 0904:2001/AMENDMENT 1:2009 Conical shaft ends for cone taper ratio 1:10 (Amendment 1) (Foreign Standard)
JIS B 1082:2009 Stress area and bearing area for threaded fasteners (Foreign Standard)
JIS B 1116:2009 Slotted head screws for precision instruments (Foreign Standard)
JIS B 1217:2009 Bolting for use with pipe flanges (Foreign Standard)
JIS B 1301:1996/AMENDMENT 1:2009 Keys and their corresponding keyways (Amendment 1) (Foreign Standard)
JIS B 2011:2003/AMENDMENT 2:2009 Bronze, gate, globe, angle, and check valves (Amendment 2) (Foreign Standard)
JIS B 2061:2006/AMENDMENT 1:2009 Faucets, ball taps and flush valves (Amendment 1) (Foreign Standard)
JIS B 8274:2008 Flat tubesheet for pressure vessels (Foreign Standard)
JIS B 8410:2004/AMENDMENT 1:2009 Pressure reducing valves for water works (Amendment 1) (Foreign Standard)
JIS B 8414:2004/AMENDMENT 1:2009 Relief valves for hot water appliances (Amendment 1) (Foreign Standard)
JIS K 6769:2004/AMENDMENT 1:2009 Crosslinked polyethylene (PE-X) pipes (Amendment 1) (Foreign Standard)
JIS K 6770:2004/AMENDMENT 2:2009 Crosslinked polyethylene (PE-X) pipe fittings (Amendment 2) (Foreign Standard)
JIS K 6777:2007/AMENDMENT 1:2009 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 1) (Foreign Standard)
JIS K 6778:2004/AMENDMENT 1:2009 Polybutene (PB) pipes (Amendment 1) (Foreign Standard)
JIS K 6779:2004/AMENDMENT 1:2009 Polybutene (PB) pipe fittings (Amendment 1) (Foreign Standard)
JIS K 6787:2004/AMENDMENT 1:2009 Crosslinked polyethylene (PE-X) pipes for water supply (Amendment 1) (Foreign Standard)
JIS K 6788:2004/AMENDMENT 1:2009 Crosslinked polyethylene (PE-X) pipe fittings for water supply (Amendment 1) (Foreign Standard)
JIS K 6792:2004/AMENDMENT 1:2009 Polybutene (PB) pipes for water supply (Amendment 1) (Foreign Standard)
JIS K 6793:2004/AMENDMENT 1:2009 Polybutene (PB) pipe fittings for water supply (Amendment 1) (Foreign Standard)
JIS K 7013:1997/AMENDMENT 1:2009 Fibre reinforced plastic pipes (Amendment 1) (Foreign Standard)
JIS Z 3211:2008 Covered electrodes for mild steel, high tensile strength steel and low temperature service steel (Foreign Standard)
JIS C 8980:2009 Power conditioner for small photovoltaic power generating system (Foreign Standard)
JIS S 2109:2008/AMENDMENT 1:2009 Gas burning water heaters for domestic use (Amendment 1) (Foreign Standard)
JIS C 5101-14-3:2009 Fixed capacitors for use in electronic equipment -- Part 14-3: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains -- Assessment level DZ (Foreign Standard)
JIS C 5101-16:2009 Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors (Foreign Standard)
JIS L 1092:2009 Testing methods for water resistance of textiles (Foreign Standard)
JIS K 6353:1997/AMENDMENT 2:2009 Rubber goods for water works (Amendment 2) (Foreign Standard)
JIS K 6743:2007/AMENDMENT 1:2009 Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for water supply (Amendment 1) (Foreign Standard)
JIS K 6919:1992/AMENDMENT 1:2009 Liquid unsaturated polyester resins for fiber reinforced plastics (Amendment 1) (Foreign Standard)
JIS K 7015:1998/AMENDMENT 1:2009 Pultruded fibre reinforced plastics (Amendment 1) (Foreign Standard)
JIS A 9510:2009 Inorganic porous thermal insulation materials (Foreign Standard)
JIS C 9219:2005/AMENDMENT 1:2009 Electric storage tank water heaters (Amendment 1) (Foreign Standard)
JIS S 2116:2004/AMENDMENT 1:2009 Water heaters containing water under atmospheric pressure (Amendment 1) (Foreign Standard)
Update & Latest for JIS Standards

No comments:

Post a Comment