2009/11/01

Cheapest & Latest ASTM D-3 Standards (NEW|PDF)

Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards


NFPA Standards


IEEE Standards


Search & Listing Portal for ASTM Standards

Search & Listing Portal for ISO Standards

Search & Listing Portal for IEC Standards

Search & Listing Portal for BSI Standards

Search & Listing Portal for DIN Standards


ASTM D2864-09 Standard Terminology Relating to Electrical Insulating Liquids and Gases
ASTM D2865M-06 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D2866-94(2004) Standard Test Method for Total Ash Content of Activated Carbon
ASTM D2867-04 Standard Test Methods for Moisture in Activated Carbon
ASTM D2868-07 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
ASTM D2872-04 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D2875-00(2005) Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
ASTM D2876-00(2005) Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
ASTM D2878-95(2005) Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D2879-97(2007) Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2880-03 Standard Specification for Gas Turbine Fuel Oils
ASTM D2881-03(2009) Standard Classification for Metal Working Fluids and Related Materials
ASTM D2883-95(2005) Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
ASTM D2884-93(2007) Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2887-08 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2889-95(2005)e1 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
ASTM D2890-92(2008) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
ASTM D2892-05 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2893-04 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
ASTM D2896-07a Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2898-08e1 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM D2899-03 Standard Practice for Establishing Allowable Stresses for Round Timber Piles
ASTM D2902-00(2006) Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D2903-03 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D2908-91(2005) Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2913-96(2007) Standard Test Method for Mercaptan Content of the Atmosphere
ASTM D2914-01(2007) Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D2915-03 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D2916-09 Standard Specification for Isophorone
ASTM D2917-07 Standard Specification for Methyl Isoamyl Ketone
ASTM D2918-99(2005) Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D2919-01(2007) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2921-98(2005) Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
ASTM D2923-08 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM D2924-01(2006) Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2925-01(2007)e1 Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
ASTM D2929-89(2006) Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
ASTM D2930-03 Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration
ASTM D2936-08 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM D2937-04 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D2939-03 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings
ASTM D2940/D2940M-09 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
ASTM D2941-00(2008) Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2942-02(2008) Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
ASTM D2943-02(2007) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D2944-71(2008) Standard Test Method of Sampling Processed Peat Materials
ASTM D2945-90(2003)e2 Standard Test Method for Gas Content of Insulating Oils
ASTM D2946-01(2005) Standard Terminology for Asbestos and Asbestos-Cement Products
ASTM D2947-88(2006) Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM D2949-01a(2008) Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2950-09 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
ASTM D2959-95(2003) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D2960-05 Standard Test Method of Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances
ASTM D2961-02(2007) Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
ASTM D2962-97(2007) Standard Test Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches
ASTM D2967-07 Standard Test Method for Corner Coverage of Powder Coatings
ASTM D2968-95(2008) Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
ASTM D2969-04 Standard Test Methods for Steel Tire Cords
ASTM D2970/D2970M-04 Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
ASTM D2972-08 Standard Test Methods for Arsenic in Water
ASTM D2974-07a Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
ASTM D2976-71(2004) Standard Test Method for pH of Peat Materials
ASTM D2977-03 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2978-03 Standard Test Method for Volume of Processed Peat Materials
ASTM D2979-01(2009) Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
ASTM D2980-04 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
ASTM D2981-94(2009) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D2982-07 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D2983-04a Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D2985-92(2006) Standard Test Method for Color of Asbestos
ASTM D2987-88(2006) Standard Test Method for Moisture Content of Asbestos Fiber
ASTM D2988-96(2005) Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D2989-01(2006) Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
ASTM D2990-01 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D2992-06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D2995-99(2009) Standard Practice for Estimating Application Rate of Bituminous Distributors
ASTM D2996-01(2007)e1 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-01(2007)e1 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3002-07 Standard Guide for Evaluation of Coatings Applied to Plastics
ASTM D3003-01(2006) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D3004-08 Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM D3005-99(2004) Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3006-99(2004) Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3012-07 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM D3013-99(2004)e1 Standard Specification for Epoxy Molding Compounds
ASTM D3014-04a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
ASTM D3016-97(2003) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
ASTM D3018/D3018M-09 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
ASTM D3019-08 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered
ASTM D3021-01(2006) Standard Specification for Phthalocyanine Green Pigments
ASTM D3022-84(2005) Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
ASTM D3023-98(2003) Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
ASTM D3025-07 Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
ASTM D3030-95(2006) Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
ASTM D3032-04 Standard Test Methods for Hookup Wire Insulation
ASTM D3034-08 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D3035-08 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D3038-93(2004) Standard Test Method for Drop Shatter Test for Coke
ASTM D3039/D3039M-08 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D3042-09 Standard Test Method for Insoluble Residue in Carbonate Aggregates
ASTM D3043-00(2006) Standard Test Methods for Structural Panels in Flexure
ASTM D3044-94(2006) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
ASTM D3045-92(2003) Standard Practice for Heat Aging of Plastics Without Load
ASTM D3048-89(2003) Standard Test Method of Assay for Alkaline Protease
ASTM D3049-89(2003) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
ASTM D3050-07 Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
ASTM D3052-87(2003) Standard Practice for Rating Water-Emulsion Floor Polishes
ASTM D3053-08b Standard Terminology Relating to Carbon Black
ASTM D3056-05 Standard Test Method for Gel Time of Solventless Varnishes
ASTM D3060-94(2005) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
ASTM D3061-97(2008) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
ASTM D3064-97(2008) Terminology Relating to Aerosol Products
ASTM D3065-01(2006) Standard Test Methods for Flammability of Aerosol Products
ASTM D3069-94(2005) Standard Test Method for Delivery Rate of Aerosol Products
ASTM D3070-00(2005) Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D3076-00(2005) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D3078-02(2008) Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D3079-94(2009)e1 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
ASTM D3080-04 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
ASTM D3082-09 Standard Test Method for Boron in Water
ASTM D3084-05 Standard Practice for Alpha-Particle Spectrometry of Water
ASTM D3087-91(2009) Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM D3089-97(2008) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D3090-72(2008) Standard Practice for Storage Testing of Aerosol Products
ASTM D3091-72(2008) Standard Practice for Safe Filling of Low-Pressure Pressurized Products
ASTM D3094-00(2005) Standard Test Method for Seepage Rate of Aerosol Products
ASTM D3103-07e1 Standard Test Method for Thermal Insulation Performance of Distribution Packages
ASTM D3104-99(2005) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
ASTM D3105-08 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM D3106-07 Standard Test Method for Permanent Deformation of Elastomeric Yarns
ASTM D3107-07 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3108-07 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM D3111-99(2004)e1 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D3115-95(2005) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D3117-03 Standard Test Method for Wax Appearance Point of Distillate Fuels
ASTM D3120-08 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D3121-06 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D3122-95(2009) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
ASTM D3123-09 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3125-06 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D3128-07 Standard Specification for 2-Methoxyethanol
ASTM D3130-03 Standard Specification for n-Propyl Acetate (96 % Grade)
ASTM D3131-07 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM D3134-97(2008)e1 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3135-87(2005) Standard Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics
ASTM D3136-04(2008)e1 Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
ASTM D3137-81(2007) Standard Test Method for Rubber Property—Hydrolytic Stability
ASTM D3138-04 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
ASTM D3139-98(2005) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM D3141/D3141M-09 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D3143-08 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D3144-00(2006) Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
ASTM D3145-08 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
ASTM D3147-06 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
ASTM D3149-06 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D3150-00(2006) Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
ASTM D3153-87(2008) Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
ASTM D3154-00(2006) Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
ASTM D3155-98(2006) Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
ASTM D3156-96(2005) Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
ASTM D3157-05 Standard Test Method for Rubber from Natural Sources—Color
ASTM D3159-06 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
ASTM D3160-07 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)
ASTM D3161-09 Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM D3163-01(2008) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3164-03 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3164M-03 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3165-07 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D3166-99(2005) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D3167-03a(2004) Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D3168-85(2005) Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
ASTM D3170-03(2007) Standard Test Method for Chipping Resistance of Coatings
ASTM D3171-09 Standard Test Methods for Constituent Content of Composite Materials
ASTM D3172-07a Standard Practice for Proximate Analysis of Coal and Coke
ASTM D3173-03(2008) Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3174-04 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
ASTM D3175-07 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
ASTM D3176-89(2002) Standard Practice for Ultimate Analysis of Coal and Coke
ASTM D3177-02(2007) Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke
ASTM D3180-07 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D3181-95(2008) Standard Guide for Conducting Wear Tests on Textiles
ASTM D3182-07 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3183-09 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D3184-07 Standard Test Methods for Rubber—Evaluation of NR (Natural Rubber)
ASTM D3185-06 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
ASTM D3186-07 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
ASTM D3187-06 Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D3188-06 Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)
ASTM D3189-06 Standard Test Methods for Rubber-Evaluation of Solution BR (Polybutadiene Rubber)
ASTM D3190-06 Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)
ASTM D3191-09e1 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
ASTM D3192-09 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
ASTM D3193-09 Standard Specification for Ethylbenzene
ASTM D3194-04 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
ASTM D3195-90(2004) Standard Practice for Rotameter Calibration
ASTM D3198-97(2007) Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
ASTM D3200-74(2005) Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
ASTM D3201-08a Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM D3203-05 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
ASTM D3206-08 Standard Test Method for Soil Resistance of Floor Polishes
ASTM D3207-92(2008) Standard Test Method for Detergent Resistance of Floor Polish Films
ASTM D3208-00(2005) Standard Specification for Manifold Papers for Permanent Records
ASTM D3209-93(2008) Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
ASTM D3210-95(2008) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
ASTM D3212-07 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D3213-08 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
ASTM D3217-07 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM D3218-07 Standard Specification for Polyolefin Monofilaments
ASTM D3222-05 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D3223-02(2007)e1 Standard Test Method for Total Mercury in Water
ASTM D3227-04a Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D3228-08 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D3230-08 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3231-07 Standard Test Method for Phosphorus in Gasoline
ASTM D3233-93(2009) Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
ASTM D3235-06 Standard Test Method for Solvent Extractables in Petroleum Waxes
ASTM D3236-88(2004) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D3237-06e1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D3238-95(2005) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D3239-91(2006) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
ASTM D3240-05 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D3241-09 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D3242-08 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D3244-07a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D3245-03 Standard Test Method for Pumpability of Industrial Fuel Oils
ASTM D3246-05 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D3249-95(2005) Standard Practice for General Ambient Air Analyzer Procedures
ASTM D3251-04 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM D3256-86(2009) Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
ASTM D3257-06 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
ASTM D3258-04 Standard Test Method for Porosity of White or Near White Paint Films by Staining
ASTM D3259-95(2001)e1 Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
ASTM D3260-01(2005) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
ASTM D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3262-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3265-07 Standard Test Method for Carbon Black-Tint Strength
ASTM D3266-91(2005) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3267-91(2005) Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D3268-91(2005) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM D3269-96(2001)e1 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures)
ASTM D3270-00(2006) Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D3271-87(2006) Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
ASTM D3273-00(2005) Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D3274-09 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D3275-08 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D3276-07 Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D3277-95(2001)e1 Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation
ASTM D3278-96(2004)e1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D3279-07 Standard Test Method forn-Heptane Insolubles
ASTM D3280-85(2009) Standard Test Methods for Analysis of White Zinc Pigments
ASTM D3282-09 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM D3283-98(2004) Standard Specification for Air as an Electrical Insulating Material
ASTM D3284-05 Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM D3285-93(2005) Standard Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test)
ASTM D3288/D3288M-08 Standard Test Methods for Magnet-Wire Enamels
ASTM D3289-08 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
ASTM D3290-00(2005) Standard Specification for Bond and Ledger Papers for Permanent Records
ASTM D3291-97(2003) Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
ASTM D3294-03 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
ASTM D3295-06 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
ASTM D3296-03(2008) Standard Specification for FEP-Fluorocarbon Tube
ASTM D3299-08 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D3300-00(2006) Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
ASTM D3301-00(2005) Standard Specification for File Folders for Storage of Permanent Records
ASTM D3302/D3302M-09 Standard Test Method for Total Moisture in Coal
ASTM D3305-94(2005) Standard Practice for Sampling Small Gas Volume in a Transformer
ASTM D3306-08a Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D3307-08 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
ASTM D3308-06 Standard Specification for PTFE Resin Skived Tape
ASTM D3309-96a(2002) Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
ASTM D3310-00(2006) Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D3311-09a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3312-04 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
ASTM D3313-05a Standard Test Method for Carbon Black—Individual Pellet Hardness
ASTM D3314-02(2006) Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D3316-06 Standard Test Method for Stability of Perchloroethylene with Copper
ASTM D3319-06 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
ASTM D3320-00(2004)e1 Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
ASTM D3321-94(2007) Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D3322-82(2005) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D3325-90(2006) Standard Practice for Preservation of Waterborne Oil Samples
ASTM D3326-07 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D3328-06 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D3329-03 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D3330/D3330M-04 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3332-99(2004) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3333-07 Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing
ASTM D3335-85a(2009) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D3336-05e1 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3338/D3338M-09 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3339-08 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
ASTM D3340-07 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D3341-05 Standard Test Method for Lead in Gasoline-Iodine Monochloride Method
ASTM D3342-90(2006) Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
ASTM D3343-05 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D3344-90(2005) Standard Test Method for Total Wax Content of Corrugated Paperboard
ASTM D3345-08 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM D3346-07 Standard Test Methods for Rubber Property-Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
ASTM D3348-07 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
ASTM D3349-06 Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
ASTM D3350-08 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3352-08a Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
ASTM D3353-04 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM D3354-08 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3359-09 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D3361-01(2006) Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D3362-05 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography
ASTM D3363-05 Standard Test Method for Film Hardness by Pencil Test
ASTM D3364-99(2004) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D3366-95(2003)e1 Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
ASTM D3367-09 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
ASTM D3368-04 Standard Specification for FEP-Fluorocarbon Resin Sheet and Film
ASTM D3370-08 Standard Practices for Sampling Water from Closed Conduits
ASTM D3372-02(2007)e1 Standard Test Method for Molybdenum in Water
ASTM D3373-03(2007)e1 Standard Test Method for Vanadium in Water
ASTM D3374-07 Standard Specification for Vinyl-Coated Glass Yarns
ASTM D3375-95a(2007) Standard Test Method for Column Capacity of Particulate Mixed Bed Ion
ASTM Exchange Materials
ASTM D3376-88(2005) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D3377-04 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D3380-90(2003) Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
ASTM D3381-09 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D3382-07 Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
ASTM D3385-09 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM D3387-83(2003) Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
ASTM D3389-05 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D3393-91(2005) Standard Specification for Coated Fabrics-Waterproofness
ASTM D3394-94(2005) Standard Test Methods for Sampling and Testing Electrical Insulating Board
ASTM D3398-00(2006) Standard Test Method for Index of Aggregate Particle Shape and Texture
ASTM D3401-97(2006) Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
ASTM D3402/D3402M-93(2008) Standard Test Method for Tumbler Test for Coke
ASTM D3403-07 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
ASTM D3404-91(2004) Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
ASTM D3406-95(2006) Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
ASTM D3409-93(2008) Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
ASTM D3410/D3410M-03(2008) Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3412-07 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D3415-98(2004) Standard Practice for Identificaiton of Waterborne Oils
ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3419-00(2006) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
ASTM D3420-08a Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3423-84(2003) Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
ASTM D3424-09 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
ASTM D3426-97(2004) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D3427-07 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D3429-93(2007) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3430-95(2008) Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
ASTM D3433-99(2005) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3434-00(2006) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D3437-08 Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM D3438-07 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D3440-01(2007) Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
ASTM D3441-05 Standard Test Method for Mechanical Cone Penetration Tests of Soil
ASTM D3443-00(2005) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3444-00(2005) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3448-85(2005) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3450-00(2005) Standard Test Method for Washability Properties of Interior Architectural Coatings
ASTM D3451-06 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D3452-06 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
ASTM D3453-07 Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
ASTM D3454-05 Standard Test Method for Radium-226 in Water
ASTM D3455-02 Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
ASTM D3456-86(2008) Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D3458-00(2005) Standard Specification for Copies from Office Copying Machines for Permanent Records
ASTM D3460-07 Standard Specification for White Watermarked and Unwatermarked Bond, Reprographic, and Laser Printer Cut-Sized Office Papers
ASTM D3461-97(2007) Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
ASTM D3462/D3462M-09a Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
ASTM D3464-96(2007) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3465-00(2007)e1 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D3466-06 Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D3467-04(2009) Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
ASTM D3468-99(2006)e1 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
ASTM D3469-97(2007) Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
ASTM D3470-97(2007) Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
ASTM D3472-97(2007) Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
ASTM D3474-90(2007) Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications
ASTM D3475-09 Standard Classification of Child-Resistant Packages
ASTM D3479/D3479M-96(2007) Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3481-06 Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
ASTM D3482-07a Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM D3483-05(2009) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
ASTM D3484-06 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
ASTM D3485-02 Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ASTM D3487-08 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D3489-06 Standard Test Methods for Microcellular Urethane Materials
ASTM D3492-08 Standard Specification for Rubber Contraceptives (Male Condoms)
ASTM D3493-09 Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
ASTM D3495-00(2006) Standard Test Method for Hexane Extraction of Leather
ASTM D3496-99(2005) Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
ASTM D3498-03 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
ASTM D3499-94(2005) Standard Test Method for Toughness of Wood-Based Structural Panels
ASTM D3500-90(2003) Standard Test Methods for Structural Panels in Tension
ASTM D3501-05a Standard Test Methods for Wood-Based Structural Panels in Compression
ASTM D3504-96(2003)e1 Standard Specification for Maleic Anhydride
ASTM D3505-96(2006) Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
ASTM D3511-08 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3512-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM D3513-02(2007) Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
ASTM D3514-09 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
ASTM D3516-89(2006) Standard Test Methods for Ashing Cellulose
ASTM D3517-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3518/D3518M-94(2007) Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
ASTM D3519-88(2007) Standard Test Method for Foam in Aqueous Media (Blender Test)
ASTM D3521-86(2007) Standard Test Method for Surface Wax Coating On Corrugated Board
ASTM D3522-86(2007) Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing
ASTM D3523-92(2007) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
ASTM D3524-04 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ASTM D3525-04 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D3527-07e1 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D3528-96(2008) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D3529/D3529M-97(2008) Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM D3530/D3530M-97(2008) Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3531-99(2004) Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASTM D3532-99(2004) Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D3535-07a Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D3539-87(2004) Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
ASTM D3540-06 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)
ASTM D3541-05 Standard Specification for 2-Ethylhexyl Acrylate
ASTM D3542-08 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
ASTM D3543-93(2008) Standard Test Method for Metal Glide Adhesion
ASTM D3545-06 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
ASTM D3546-05 Standard Test Method for Formic Acid in Glacial Acetic Acid
ASTM D3547-05 Standard Specification for n-Butyl Acrylate
ASTM D3548-09 Standard Specification for Ethyl Acrylate
ASTM D3549-03 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D3550-01(2007) Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
ASTM D3551-08 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
ASTM D3552-96(2007) Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3554-07 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
ASTM D3555-07 Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90°C Operation
ASTM D3556-85(2001) Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
ASTM D3557-02(2007)e1 Standard Test Methods for Cadmium in Water
ASTM D3558-08 Standard Test Methods for Cobalt in Water
ASTM D3559-08 Standard Test Methods for Lead in Water
ASTM D3561-02(2007)e1 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3562-99(2005) Standard Performance Specification for Woven Drycleanable Coat Fabrics
ASTM D3564-95(2008) Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
ASTM D3566-03(2009) Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM D3567-97(2006) Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D3568-03 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
ASTM D3574-08 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
ASTM D3575-08 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
ASTM D3576-04 Standard Test Method for Cell Size of Rigid Cellular Plastics
ASTM D3577-09e1 Standard Specification for Rubber Surgical Gloves
ASTM D3578-05e1 Standard Specification for Rubber Examination Gloves
ASTM D3579-77(2004) Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
ASTM D3580-95(2004) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D3585-08 Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D3590-02(2006) Standard Test Methods for Total Kjeldahl Nitrogen in Water
ASTM D3591-97(2003) Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
ASTM D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3595-02(2007) Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
ASTM D3596-09 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM D3597-02(2008) Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked
ASTM D3598-89(2003) Standard Test Method for Citrate in Synthetic Detergents
ASTM D3601-88(2007) Standard Test Method for Foam In Aqueous Media (Bottle Test)
ASTM D3603-07 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
ASTM D3605-00(2005) Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D3606-07 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
ASTM D3607-08 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
ASTM D3608-95(2005) Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
ASTM D3609-00(2005) Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D3610-00(2004) Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D3611-06 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM D3612-02(2009) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
ASTM D3614-07 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
ASTM D3616-95(2004)e1 Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
ASTM D3617-07 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
ASTM D3618-05 Standard Test Method for Detection of Lead in Paint and Dried Paint Films
ASTM D3620-04(2009) Standard Specification for Glacial Acetic Acid
ASTM D3622-05 Standard Specification for 1-Propanol (n-Propyl Alcohol)
ASTM D3623-78a(2004) Standard Test Method for Testing Antifouling Panels in Shallow Submergence
ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3625-96(2005) Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
ASTM D3628-08 Standard Practice for Selection and Use of Emulsified Asphalts
ASTM D3631-99(2007) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D3632-98(2004) Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D3633-98(2006) Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
ASTM D3634-99(2005)e1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D3635-01(2005) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D3636-06 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D3638-07 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM D3639-92(2006)e1 Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM D3641-02 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D3642-98(2004) Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
ASTM D3643-98(2004) Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
ASTM D3644-06 Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
ASTM D3645-08 Standard Test Methods for Beryllium in Water
ASTM D3647-09 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
ASTM D3648-04 Standard Practices for the Measurement of Radioactivity
ASTM D3649-06 Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water
ASTM D3650-93(2006) Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
ASTM D3651-07 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
ASTM D3652/D3652M-01(2006) Standard Test Method for Thickness of Pressure-Sensitive Tapes
ASTM D3654/D3654M-06 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
ASTM D3655-02(2008) Standard Performance Specification for Men's and Women's Sliver Knitted Overcoat and Jacket Fabrics
ASTM D3656-07 Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
ASTM D3657-03 Standard Specification for Zipper Dimensions
ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3664-04 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
ASTM D3665-07 Standard Practice for Random Sampling of Construction Materials
ASTM D3666-09 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM D3667-05 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D3670-91(2007) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3673-89(2003) Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
ASTM D3675-09a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3676-07 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM D3678-97(2008)e1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
ASTM D3679-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D3681-06 Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
ASTM D3682-01(2006) Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D3683-04 Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D3684-01(2006) Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
ASTM D3685/D3685M-98(2005) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D3686-08 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3687-07 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D3689-07 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM D3690-02(2008) Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor
ASTM D3691/D3691M-09 Standard Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics
ASTM D3692-89(2005)e1 Standard Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings
ASTM D3693-02 Standard Specification for Labeled Length per Holder of Sewing Thread
ASTM D3694-96(2004) Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
ASTM D3695-95(2007) Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
ASTM D3697-07 Standard Test Method for Antimony in Water
ASTM D3698-04 Standard Practice for Solvent Vapor Degreasing Operations
ASTM D3699-08 Standard Specification for Kerosine
ASTM D3700-07 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D3701-01(2006) Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
ASTM D3702-94(2004) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
ASTM D3703-07 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
ASTM D3704-96(2006) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
ASTM D3705-86(2009) Standard Test Method for Misting Properties of Lubricating Fluids
ASTM D3707-89(2005)e1 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
ASTM D3708-88(2005) Standard Test Method for Weight of Wax Applied During Curtain Coating Operation
ASTM D3709-89(2005)e1 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
ASTM D3710-95(2009) Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
ASTM D3711-95(2005) Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ASTM D3712-05 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
ASTM D3715/D3715M-98(2004) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
ASTM D3716-99(2008) Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3720-90(2005) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-ray Diffraction
ASTM D3721-05 Standard Specification for Synthetic Red Iron Oxide Pigment
ASTM D3722-05 Standard Specification for Natural Red and Brown Iron Oxide Pigments
ASTM D3723-05 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D3724-01(2007) Standard Specification for Synthetic Brown Iron Oxide Pigment
ASTM D3728-08 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)
ASTM D3730-03 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
ASTM D3731-87(2004) Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
ASTM D3732-82(2005) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM D3734-05 Standard Specification for High-Flash Aromatic Naphthas
ASTM D3735-07 Standard Specification for VMP Naphthas
ASTM D3737-08 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
ASTM D3738-84(2004) Standard Specification for Rubber-Coated Cloth Hospital Sheeting
ASTM D3739-06 Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
ASTM D3740-08 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D3741-00(2004) Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
ASTM D3744-03 Standard Test Method for Aggregate Durability Index
ASTM D3745-95(2006) Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
ASTM D3746-85(2008) Standard Test Method for Impact Resistance of Bituminous Roofing Systems
ASTM D3747-79(2007) Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
ASTM D3748-09 Standard Practice for Evaluating High-Density Rigid Cellular Plastics
ASTM D3749-08 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
ASTM D3751-94(2008) Standard Practice for Evaluation of Furniture Polish
ASTM D3752-98(2006) Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
ASTM D3753-05e1 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
ASTM D3754-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D3755-97(2004) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D3756-97(2004) Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
ASTM D3757-89(2005)e1 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
ASTM D3758-95(2003) Standard Practice for Evaluation of Spray-Buff Products on Test Floors
ASTM D3759/D3759M-05 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3760-08 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
ASTM D3761-96(2002) Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D3762-03 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
ASTM D3763-08 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
ASTM D3764-09 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D3766-08 Standard Terminology Relating to Catalysts and Catalysis
ASTM D3767-03(2008) Standard Practice for Rubber—Measurement of Dimensions
ASTM D3768-06 Standard Test Method for Microcellular Urethanes-Flexural Recovery
ASTM D3769-05 Standard Test Method for Microcellular Urethanes--High Temperature Sag
ASTM D3771-03(2007) Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM D3772-01(2005) Standard Specification for Natural Rubber Finger Cots
ASTM D3773-07 Standard Test Methods for Length of Woven Fabric
ASTM D3774-96(2008)e1 Standard Test Methods for Width of Textile Fabric
ASTM D3775-08 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM D3776/D3776M-09a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3780-02(2008) Standard Performance Specification for Men's and Boys' Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics
ASTM D3782-02(2008) Standard Performance Specification for Men's and Boys' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics
ASTM D3783-02 Standard Performance Specification for Woven Flat Lining Fabrics for Men's and Boys' Apparel
ASTM D3785-02(2008) Standard Performance Specification for Woven Necktie and Scarf Fabrics
ASTM D3786/D3786M-09 Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM D3787-07 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
ASTM D3790-79(2006) Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
ASTM D3791-04 Standard Practice for Evaluating the Effects of Heat on Asphalts
ASTM D3792-05(2009) Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D3793-06 Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D3796-90(2004) Standard Practice for Calibration of Type S Pitot Tubes
ASTM D3797-05 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
ASTM D3800-99(2004) Standard Test Method for Density of High-Modulus Fibers
ASTM D3801-06 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position


Cheapest & Original

Any question, send the mail to findstandards@tom.com directly

findstandards.info

DIN Standards

BSI Standards

ASTM Standards

ISO Standards

SAE Standards

JIS Standards


NFPA Standards


IEEE Standards


Search & Listing Portal for ASTM Standards

Search & Listing Portal for ISO Standards

Search & Listing Portal for IEC Standards

Search & Listing Portal for BSI Standards

Search & Listing Portal for DIN Standards

No comments:

Post a Comment