2009/09/07

Cheapest & Latest DIN Standard (PDF) (23)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


DIN EN 3624:1996
Aerospace series - Polysulphide sealants, two component - Technical specification (FOREIGN STANDARD)
DIN EN 3618:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in titanium Ti 44,5 Cb; inch based series (FOREIGN STANDARD)
DIN EN 3615:1999
Aerospace series - Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption (FOREIGN STANDARD)
DIN EN 3612:1996
Aerospace series - Undercuts for splines - Design standard (FOREIGN STANDARD)
DIN EN 3611:1995
Aerospace series - Spigots - Dimensions and fit selection; design standard (FOREIGN STANDARD)
DIN EN 3567-004:2003
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard; German and English version EN 3567-004:2001 (FOREIGN STANDARD)
DIN EN 3567-003:2003
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard; German and English version EN 3567-003:2001 (FOREIGN STANDARD)
DIN EN 3567-001:2003
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification; German and English version EN 3567-001:2001 (FOREIGN STANDARD)
DIN EN 3557:1998
Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications, 0,6 mm a 3 mm (FOREIGN STANDARD)
DIN EN 3553:2006
Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D 160 mm; German and English version EN 3553:2004 (FOREIGN STANDARD)
DIN EN 3552:2006
Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 3552:2005 (FOREIGN STANDARD)
DIN EN 3545-009:2009
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 009: Protective cover for plug and receptacle - Product standard; German and English v
DIN EN 3545-008:2008
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 008: Tools for assembly/removal of coding and att (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-007:2006
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 007: Cable clamp - Product standard; German and E (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-006:2007
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 006: Male coding and attachment System for mounti (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-005:2007
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 005: Female coding and attachment System for moun (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-004:2006
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 004: Connectors with male contacts - Product stan (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-003:2006
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 003: Connectors with female contacts - Product st (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-002:2009
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 002: Specification of performance and contact arrangements; German and English version
DIN EN 3545-001:2009
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 001: Technical specification; German and English version EN 3545-001:2008 (Foreign Sta
DIN EN 3543:1997
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3542:1998
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) (FOREIGN STANDARD)
DIN EN 3539:1993
Aerospace series; nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3538:1993
Aerospace series; nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3537:1993
Aerospace series; nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3536:2007
Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C; German and English version EN 3536:2006 (FOREIGN STANDARD)
DIN EN 3532:2007
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm a 40 mm - 1 750 MPa R< (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3531:2007
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1 750 MPa R<(Index (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3529:1999
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5), vacuum induction melted and vacuum arc remelted, solution treated and precipitation treated - Forgings a or D 150 mm, 1750 MPa R<(Index)m> 2000 MPa (FOREIGN STANDARD)
DIN EN 3527:2007
Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D 300 mm; German and English version EN 3527:2007 (FOREIGN STANDARD)
DIN EN 3526:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm a 6 mm - 980 MPa R<(Index)m> 1180 MPa; German and English version EN 3526:2007 (FOREIGN STANDARD)
DIN EN 3525:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm a 20 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3525:2007 (FOREIGN STANDARD)
DIN EN 3524:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm a 6 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3524:2007 (FOREIGN STANDARD)
DIN EN 3523:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De 100 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3523:2007 (FOREIGN STANDARD)
DIN EN 3521:1999
Aerospace series - Steel FE-PL2106 (30CrNiMo8) air melted, hardened and tempered - Bar for machining D<(Index)e> 150 mm, 900 MPa R<(Index)m> 1100 MPa (FOREIGN STANDARD)
DIN EN 3520:1995
Aerospace series - Steel FE-PL2105 - Air melted; softened; forging stock a or D 300 mm (FOREIGN STANDARD)
DIN EN 3519:1995
Aerospace series - Steel FE-PL2105 - Air melted; hardened and tempered; bar for machining D<(Index)e> 150 mm, 880 MPa R<(Index)m> 1080 MPa (FOREIGN STANDARD)
DIN EN 3518:1995
Aerospace series - Steel FE-PL2105 - Air melted; hardened and tempered; forgings D<(Index)e> 150 mm, 1080 MPa R<(Index)m> 1280 MPa (FOREIGN STANDARD)
DIN EN 3517:1995
Aerospace series - Steel FE-PL2105 - Air melted; hardened and tempered; bar for machining D<(Index)e> 150 mm, 1080 MPa R<(Index)m> 1280 MPa (FOREIGN STANDARD)
DIN EN 3516:1999
Aerospace series - Steel FE-PL8201 (41NiCrMo2), air melted, softened - Forging stock a or D 300 mm (FOREIGN STANDARD)
DIN EN 3515:1999
Aerospace series - Steel FE-PL8201 (41NiCrMo2), air melted, hardened and tempered - Hand and die forgings D<(Index)e> 25 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 3512:1999
Aerospace series - Steel FE-PL1801 (100Cr6), vacuum induction melted and consumable electrode remelted, hardened and tempered - Hollow bars for the manufacturer of bearings 3,5 mm a 55 mm (FOREIGN STANDARD)
DIN EN 3511:1999
Aerospace series - Steel FE-PL1801 (100Cr6), vacuum induction melted and consumable electrode remelted, softened - Bar for the manufacture of machined bearings a or D 130 mm (FOREIGN STANDARD)
DIN EN 3510:1998
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) solution treated and precipitation treated - Bar and section D<(Index)e> 100 mm (FOREIGN STANDARD)
DIN EN 3509:1999
Aerospace series - Steel FE-PL1501 (30CrMo12), air melted, hardened and tempered - Bar D<(Index)e> 40 mm, 1050 MPa R<(Index)m> 1250 MPa (FOREIGN STANDARD)
DIN EN 3508:1999
Aerospace series - Steel FE-PL1501 (30CrMo12), air melted, hardened and tempered - Bar D<(Index)e> 100 mm, 930 MPa R<(Index)m> 1080 MPa (FOREIGN STANDARD)
DIN EN 3507:2007
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - D<(Index)e> 100 mm - 930 MPa R<(Index)m> 1080 MPa; German and English version EN 3507:2006 (FOREIGN STANDARD)
DIN EN 3506:2003
Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm; Dimensions; German and English version EN 3506:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3504:1994
Aerospace series; titanium and titanium alloys; circular tubes for fluids; close tolerances; diameter 3,2 mm D 50 mm, thickness 0,25 mm a 2 mm; dimensions (FOREIGN STANDARD)
DIN EN 3499:1992
Aerospace series; titanium TI-P99003; annealed, sheet and strip, cold rolled, a 3 mm, 570 MPa R<(Index)m> 730 MPa (FOREIGN STANDARD)
DIN EN 3498:1992
Aerospace series; titanium TI-P99002; annealed, sheet and strip, cold rolled, a 3 mm, 390 MPa R<(Index)m> 540 MPa (FOREIGN STANDARD)
DIN EN 3497:1992
Aerospace series; titanium TI-P99001; annealed, sheet and strip, cold rolled, a 3 mm, 290 MPa R<(Index)m> 420 MPa (FOREIGN STANDARD)
DIN EN 3496:1996
Aerospace series - Titanium TI-P99003 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3495:1996
Aerospace series - Titanium alloy TI-P19001 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3494:1996
Aerospace series - Titanium alloy TI-P19001 - Grade 2, solution treated and aged, forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3491:2007
Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - D<(Index)e> 100 mm - 900 MPa R<(Index)m> 1100 MPa; German and English version EN 3491:2006 (FOREIGN STANDARD)
DIN EN 3490:2007
Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De 200 mm - 900 MPa R<(Index)m> 1100 MPa; German and English version EN 3490:2007 (FOREIGN STANDARD)
DIN EN 3488:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - a 6 mm - 500 MPa R<(Index)m> 700 MPa; German and English version EN 3488:2007 (FOREIGN STANDARD)
DIN EN 3487:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D 250 mm - 500 MPa R<(Index)m> 700 MPa; German and English version EN 3487:2007 (FOREIGN STANDARD)
DIN EN 3480:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm a 50 mm - 500 MPa R<(Index)m> 700 MPa; German and English version EN 3480:2007 (FOREIGN STANDARD)
DIN EN 3479:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm a 20 mm - 1070 MPa R<(Index)m> (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3477:1999
Aerospace series - Steel FE-PM3503 (X7CrNiMo15-7-3) - Air melted, solution treated and precipitation treated - Plate 6 mm a 15 mm, 1310 MPa R<(Index)m> 1550 MPa (FOREIGN STANDARD)
DIN EN 3476:2007
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D 300 mm; German and English version EN 3476:2006 (FOREIGN STANDARD)
DIN EN 3475-811:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation; English version prEN 3475-811:2008 (Foreign Standard)
DIN EN 3475-810:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss; English version prEN 3475-810:2008 (Foreign Standard)
DIN EN 3475-809:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance; English version prEN 3475-809:2008 (Foreign Standard)
DIN EN 3475-808:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk; German and English version EN 3475-808:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-807:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance; German and English version EN 3475-807:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-806:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation; German and English version EN 3475-806:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-805:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance; German and English version EN 3475-805:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-804:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of propagation; German and English version EN 3475-804:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-803:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation; German and English version EN 3475-803:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-802:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance; English version prEN 3475-802:2008 (Foreign Standard)
DIN EN 3475-802:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-801:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length; German and English version EN 3475-801:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-706:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability; German and English version EN 3475-706:2005 (FOREIGN STANDARD)
DIN EN 3475-705:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement; German and English version EN 3475-705:2005 (FOREIGN STANDARD)
DIN EN 3475-704:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility; German and English version EN 3475-704:2007 (Foreign Standard)
DIN EN 3475-703:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturer's marking (FOREIGN STANDARD)
DIN EN 3475-702:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability (FOREIGN STANDARD)
DIN EN 3475-701:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippabilitiy and adherence of insulation to the conductor (FOREIGN STANDARD)
DIN EN 3475-605:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test; German and English version EN 3475-605:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-604:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-603:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2007 (Foreign Standard)
DIN EN 3475-602:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity; German and English version EN 3475-602:2007 (Foreign Standard)
DIN EN 3475-601:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3475-601:2007 (Foreign Standard)
DIN EN 3475-514:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands; German and English version EN 3475-514:2007 (Foreign Standard)
DIN EN 3475-513:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties); German and English version EN 3475-513:2005 (FOREIGN STANDARD)
DIN EN 3475-512:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-511:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-510:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-509:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-508:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness; German and English version EN 3475-508:2007 (Foreign Standard)
DIN EN 3475-507:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating; German and English version EN 3475-507:2007 (Foreign Standard)
DIN EN 3475-506:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity; German and English version EN 3475-506:2007 (Foreign Standard)
DIN EN 3475-504:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion (FOREIGN STANDARD)
DIN EN 3475-503:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion (FOREIGN STANDARD)
DIN EN 3475-502:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation (FOREIGN STANDARD)
DIN EN 3475-501:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through; German and English version EN 3475-501:2006 (FOREIGN STANDARD)
DIN EN 3475-418:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors; German and English version EN 3475-418:2007 (Foreign Standard)
DIN EN 3475-417:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness; English version prEN 3475-417:2008 (Foreign Standard)
DIN EN 3475-416:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability; German and English version EN 3475-416:2005 (FOREIGN STANDARD)
DIN EN 3475-415:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature; German and English version EN 3475-415:2005 (FOREIGN STANDARD)
DIN EN 3475-414:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test); German and English version EN 3475-414:2005 (FOREIGN STANDARD)
DIN EN 3475-413:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test; German and English version EN 3475-413:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-412:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-411:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids; German and English version EN 3475-411:2005 (FOREIGN STANDARD)
DIN EN 3475-410:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance (FOREIGN STANDARD)
DIN EN 3475-409:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing (FOREIGN STANDARD)
DIN EN 3475-408:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance; German and English version EN 3475-408:2005 (FOREIGN STANDARD)
DIN EN 3475-406:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test (FOREIGN STANDARD)
DIN EN 3475-405:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature (FOREIGN STANDARD)
DIN EN 3475-404:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock (FOREIGN STANDARD)
DIN EN 3475-403:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking (FOREIGN STANDARD)
DIN EN 3475-402:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination (FOREIGN STANDARD)
DIN EN 3475-401:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing (FOREIGN STANDARD)
DIN EN 3475-307:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage; German and English version EN 3475-307:2005 (FOREIGN STANDARD)
DIN EN 3475-306:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors; German and English version EN 3475-306:2005 (FOREIGN STANDARD)
DIN EN 3475-305:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance (FOREIGN STANDARD)
DIN EN 3475-304:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance (FOREIGN STANDARD)
DIN EN 3475-303:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance (FOREIGN STANDARD)
DIN EN 3475-302:2007
Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test; German and English version EN 3475-302:2006 (FOREIGN STANDARD)
DIN EN 3475-301:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Electrical resistance per unit length (FOREIGN STANDARD)
DIN EN 3475-203:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions; German and English version EN 3475-203:2006 (FOREIGN STANDARD)
DIN EN 3475-202:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass (FOREIGN STANDARD)
DIN EN 3475-201:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination (FOREIGN STANDARD)
DIN EN 3475-100:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General (FOREIGN STANDARD)
DIN EN 3474:2006
Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm; German and English version EN 3474:2005 (FOREIGN STANDARD)
DIN EN 3470:1999
Aerospace series - Steel FE-PM1503 (X3CrNiMoAL 13-8-2), vacuum induction melded and consumable electrode remelded, solution treated and precipitation treated - Hand and die forgings, a oder D 150 mm, 1200 M (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3469:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, solution treated and precipitation treated - Forgings a or D 200 mm, R<(Index)m> 1310 MPa (FOREIGN STANDARD)
DIN EN 3467:1997
Aerospace series - Titanium alloy TI-C64001, not heat treated - Remelting stock, D <(Index)e> 300 mm (FOREIGN STANDARD)
DIN EN 3466:1994
Aerospace series - Titanium alloy TI-P63001, solution treated and aged; bar for machining D 150 mm (FOREIGN STANDARD)
DIN EN 3465:1996
Aerospace series - Titanium alloy TI-P63001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3464:1996
Aerospace series - Titanium alloy TI-P64001, annealed - Plates 6 mma 100 mm (FOREIGN STANDARD)
DIN EN 3463:1994
Aerospace series - Titanium alloy TI-P19001, solution treated and aged; bar for machining D 75 mm (FOREIGN STANDARD)
DIN EN 3462:1994
Aerospace series - Titanium alloy TI-P19001, annealed - Bar for machining D 150 mm (FOREIGN STANDARD)
DIN EN 3461:1994
Aerospace series - Titanium alloy TI-P99003, annealed - Bar for machining D 150 mm, 540 MPa R<(Index)m> 740 MPa (FOREIGN STANDARD)
DIN EN 3460:1997
Aerospace series - Titanium TI-P99002, annealed - Bar for machining a or D 150 mm, R<(Index)m> 390 MPa (FOREIGN STANDARD)
DIN EN 3459:1996
Aerospace series - Titanium alloy TI-P63001, solution treated and aged - Plates 6 mma 50 mm (FOREIGN STANDARD)
DIN EN 3456:1992
Aerospace series; titanium alloy TI-P64001; annealed, sheet and strip, hot rolled, a 6 mm (FOREIGN STANDARD)
DIN EN 3455:1996
Aerospace series - Titanium alloy TI-P19001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3454:1996
Aerospace series - Titanium alloy TI-P19001 - Not heat treated, grade 2 forging stock for annealed forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3453:1996
Aerospace series - Titanium TI-P99003 - Not heat treated, grade 2 forging stock for annealed forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3452:1996
Aerospace series - Titanium TI-P99002 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3451:1996
Aerospace series - Titanium TI-P99002 - Not heat treated, grade 2 forging stock for annealed forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3446:1995
Aerospace series - Bearings, precision ball, without flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads (FOREIGN STANDARD)
DIN EN 3444:2007
Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature)/650 ?C; German a (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3442:1992
Aerospace series; titanium TI-P99002; annealed, sheet and strip, hot rolled, a 6 mm, 390 MPa R<(Index)m> 540 MPa (FOREIGN STANDARD)
DIN EN 3441:1992
Aerospace series; titanium TI-P99001; annealed, sheet and strip, hot rolled, a 6 mm, 290 MPa R<(Index)m> 420 MPa (FOREIGN STANDARD)
DIN EN 3439:1994
Aerospace series - Lead-acid batteries for aircraft of format D type - Product standard (FOREIGN STANDARD)
DIN EN 3438:1994
Aerospace series - Lead-acid batteries for aircraft of format C type - Product standard (FOREIGN STANDARD)
DIN EN 3437:1994
Aerospace series - Lead-acid batteries for aircraft of format B type - Product standard (FOREIGN STANDARD)
DIN EN 3436:1994
Aerospace series - Lead-acid batteries for aircraft of format A type - Product standard (FOREIGN STANDARD)
DIN EN 3435:1993
Aerospace series; nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3434:1999
Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3427:2007
Aerospace series - Groove dimensions for radial mounting retaining rings; German and English version EN 3427:2006 (FOREIGN STANDARD)
DIN EN 3424:1992
Aerospace series; rivets, solid, universal head, in titanium alloy Ti 45,5 Cb; metric series (FOREIGN STANDARD)
DIN EN 3422:1995
Aerospace series - Rivets, solid, universal head, in titanium TI-PO2, anodized - Metric series (FOREIGN STANDARD)
DIN EN 3421:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA11, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3420:1995
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3419:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in nickel base alloy NI-P11; metric series (FOREIGN STANDARD)
DIN EN 3418:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in nickel base alloy NI-P11, cadmium plated; metric series (FOREIGN STANDARD)
DIN EN 3417:1992
Aerospace series; rivets, solid, universal head, in nickel base alloy NI-P11; metric series (FOREIGN STANDARD)
DIN EN 3416:1992
Aerospace series; rivets, solid, universal head, in nickel base alloy NI-P11, cadmium plated; metric series (FOREIGN STANDARD)
DIN EN 3415:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA92HT, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3414:1995
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3413:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 7050; metric series (FOREIGN STANDARD)
DIN EN 3412:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3411:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A; metric series (FOREIGN STANDARD)
DIN EN 3410:1993
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium 1050A; metric series (FOREIGN STANDARD)
DIN EN 3409:1993
Aerospace series; rivets, solid, universal head, in aluminium 1050A, metric series (FOREIGN STANDARD)
DIN EN 3408:1992
Aerospace series; rivets, solid, 100? normal countersunk head in aluminium alloy 2017A; metric series (FOREIGN STANDARD)
DIN EN 3405:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 7050, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3404:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3403:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A; metric series (FOREIGN STANDARD)
DIN EN 3401:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium alloy 7050; metric series (FOREIGN STANDARD)
DIN EN 3400:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium alloy 5056A, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3399:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium alloy 5056A; metric series (FOREIGN STANDARD)
DIN EN 3398:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 7050, anodized or chromated, metric series (FOREIGN STANDARD)
DIN EN 3397:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 7050; metric series (FOREIGN STANDARD)
DIN EN 3396:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dom, in aluminium alloy 5056A; metric series (FOREIGN STANDARD)
DIN EN 3395:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dom, in aluminium alloy 2017A; metric series (FOREIGN STANDARD)
DIN EN 3389:2009
Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) - Classification: 1 210 MPa/730 ?C - Manufacturing method optional - Technical specification; German and English version EN 3389:2009 (Foreign Stan
DIN EN 3388:2009
Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa/650 ?C - Manufacturing method optional - Technical specification; German and English version EN 3388:2009 (Foreign S
DIN EN 3386:1992
Aerospace series; rings retaining, radial mounting, steel, phosphated (FOREIGN STANDARD)
DIN EN 3385:1992
Aerospace series; rings retaining, external, axial mounting, steel, vacuum cadmium plated (FOREIGN STANDARD)
DIN EN 3384:1992
Aerospace series; rings retaining, external, axial mounting, steel, phosphated (FOREIGN STANDARD)
DIN EN 3383:1992
Aerospace series; rings retaining, internal, axial mounting, steel, vacuum cadmium plated (FOREIGN STANDARD)
DIN EN 3382:1992
Aerospace series; rings retaining, internal, axial mounting, steel, phosphated (FOREIGN STANDARD)
DIN EN 3381:1996
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3380:1996
Aerospace series - Rings, retaining - Technical specification (FOREIGN STANDARD)
DIN EN 3379:1996
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 3378:1997
Aerospace series - Titanium TI-P99002, annealed - Wire for rivet 1,6 mm D 10 mm (FOREIGN STANDARD)
DIN EN 3377:1996
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3375-009:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 Ohms - Type WX - Product standard; English version prEN 3375-009:2008 (Foreign Standard)
DIN EN 3375-008:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard; German and English version prEN 3375-008:2008 (Foreign Standard)
DIN EN 3375-007:2008
Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard; German and English version EN 3375-007:2006 (FOREIGN STANDARD)
DIN EN 3375-006:2008
Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard; German and English version EN 3375-006:2006 (FOREIGN STANDARD)
DIN EN 3375-005:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard; German and English version EN 3375-005:2007 (Foreign Standard)
DIN EN 3375-004:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard; German and English version EN 3375-004:2007 (Foreign Standard)
DIN EN 3375-001:2008
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification; German and English version EN 3375-001:2007 (FOREIGN STANDARD)
DIN EN 3373-014:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 ?C - Product standard; English version prEN 3373-014:2008
DIN EN 3373-013:2007
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260YC - Produ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3373-012:2007
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 YC - Product standard (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3373-011:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 ?C for metric and inch stud series - Product standard;
DIN EN 3373-010:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 ?C for metric and inch stud series - Product standard; En
DIN EN 3373-002:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard; German and English version prEN 3373-002:2008 (Foreign Standard)
DIN EN 3373-001:2008
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 001: Technical specification; German and English version EN 3373-001:2007 (FOREIGN STANDARD)
DIN EN 3372-011:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 011: Dummy receptacle - Product standard; German and English versi
DIN EN 3372-009:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 009: Receptacle, jam nut mounting - Product standard; German and E
DIN EN 3372-008:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 008: Free plug with grounding spring - Product standard; German an
DIN EN 3372-007:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 007: Protective cover for plug - Product standard; German and Engl
DIN EN 3372-006:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 006: Protective cover for receptacle - Product standard; German an
DIN EN 3372-005:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product
DIN EN 3372-003:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 003: Square flange receptacle - Product standard; German and Engli
DIN EN 3372-002:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 002: Specification of performance and contact arrangements; German
DIN EN 3372-001:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 001: Technical specification; German and English version EN 3372-0
DIN EN 3370:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 7050, anodized or chromated; inch based series (FOREIGN STANDARD)
DIN EN 3369:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 7050, anodized or chromated, inch based series (FOREIGN STANDARD)
DIN EN 3368:2008
Aerospace series - Aerospace design standard - Holes for locating pins; German and English version EN 3368:2008 (FOREIGN STANDARD)
DIN EN 3365:2007
Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted, softened, forging stock a or D 300 mm; German and English version EN 3365:2007 (FOREIGN STANDARD)
DIN EN 3364:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3364:2007 (FOREIGN STANDARD)
DIN EN 3361:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a 6 mm, 1070 MPa R<(Index)m> 1220 MPa; (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3359:2007
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3359:2007 (FOREIGN STANDARD)
DIN EN 3358:1999
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2), vacuum induction melted and consumable electrode remelted, solution treated and precipitation treated - Bar for machining a or D 150 mm, R<(Index)m> < (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3357:1999
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2), vacuum induction melted and consumable electrode remelted, solution treated and precipitation treated - Bar for machining a or D 150 mm, 1200 MPa
DIN EN 3356:1996
Aerospace series - Titanium alloy TI-P46001 - Grade 2, solution treated and aged, forgings D<(Index)e> 100 mm (FOREIGN STANDARD)
DIN EN 3355:1997
Aerospace series - Titanium alloy TI-P64001, annealed - Extruded section, D<(Index)e> 150 mm, 900 MPa R<(Index)m> 1160 MPa (FOREIGN STANDARD)
DIN EN 3354:1999
Aerospace series - Titanium alloy TI-P64001, annealed - Sheet for superplastic forming a 6 mm (FOREIGN STANDARD)
DIN EN 3352:1997
Aerospace series - Titanium alloy TI-C64001 - Investment casting, hot isostatic pressed, a 50 mm, R<(Index)m> 880 MPa (FOREIGN STANDARD)
DIN EN 3351:1996
Aerospace series - Titanium alloy TI-P63001 - Grade 2, solution treated and aged, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3346:1998
Aerospace series - Aluminium alloy AL-P2014A-T3 - Drawn tube for structural applications; 0,6 mm a 12,5 mm (FOREIGN STANDARD)
DIN EN 3341:2006
Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 3341:2005 (FOREIGN STANDARD)
DIN EN 3339:2007
Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm; German and English version EN 3339:2006 (FOREIGN STANDARD)
DIN EN 3338:2006
Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3338:2005 (FOREIGN STANDARD)
DIN EN 3336:2000
Aerospace series - Aluminium alloy AL-P7150-T651 - Plate, 6 mm a 40 mm (FOREIGN STANDARD)
DIN EN 3335:2006
Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm; German and English version EN 3335:2005 (FOREIGN STANDARD)
DIN EN 3333:2006
Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm a 6 mm; German and English version EN 3333:2005 (FOREIGN STANDARD)
DIN EN 3332:2006
Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 3332:2005 (FOREIGN STANDARD)
DIN EN 3330:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealed - Bar and wire - D (Index)e 40 mm - For prevailing torque nuts; German and English version EN 3330:2009 (Foreign Standard)
DIN EN 3329:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealed - Sheet and strip - 0,3 mm a 2 mm - For prevailing torque nuts; German and English version EN 3329:2009 (Foreign Standard)
DIN EN 3328:2008
Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated - Classification: 1 000 MPa/550 ?C; German and English version EN 3328:2008 (Foreign Standard)
DIN EN 3327:2008
Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1275 MPa/650 ?C; German and English version EN 3327:2008 (Foreign Standard)
DIN EN 3323:2009
Aerospace series - Bolts with double hexagon head, relieved shank long thread - In heat resisting steel FE-PM38 (FV 535) Classification: 1000 MPa/550 ?C; German and English version EN 3323:2009 (Foreign Standard)
DIN EN 3322:1996
Aerospace series - Titanium alloy TI-P65001, solution treated and aged - Grade 1-forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3321:1996
Aerospace series - Titanium alloy TI-P65001, as forged - Grade 1 forging stock, for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3320:1996
Aerospace series - Titanium alloy TI-P64002 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3319:1994
Aerospace series - Titanium alloy TI-P64002, annealed; bar for machining D 80 mm (FOREIGN STANDARD)
DIN EN 3318:1996
Aerospace series - Titanium alloy TI-P64002 - Not heat treated, grade 2 forging stock for annealed forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3315:1996
Aerospace series - Titanium alloy TI-P64001, solution treated and aged - Forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3314:1994
Aerospace series - Titanium alloy TI-P64001, solution treated and aged; bar for machining D 75 mm (FOREIGN STANDARD)
DIN EN 3313:1996
Aerospace series - Titanium alloy TI-P64001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3312:1996
Aerospace series - Titanium alloy TI-P64001 - Grade 2, annealed, forgings D <(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3311:1994
Aerospace series - Titanium alloy TI-P64001, annealed - Bar for machining D 150 mm (FOREIGN STANDARD)
DIN EN 3310:1996
Aerospace series - Titanium alloy TI-P64001 - Not heat treated, grade 2 forging stock for annealed forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3308:1996
Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3307:1996
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3306:1996
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3305:1996
Aerospace series - Screws, 100? countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3304:1996
Aerospace series - Screws, 100? countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3303:1997
Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3301:2008
Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting steel FE-PM1708 (FV535), uncoated - Classification: 1000 MPa/550 ?C; German and English version EN 3301:2007 (FOREIGN STANDARD)
DIN EN 3299:2008
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification; German and English version EN 3299:2007 (FOREIGN STANDARD)
DIN EN 3298:2009
Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure; German and English version EN 3298:2008 (Foreign Standard)
DIN EN 3297:1998
Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification (FOREIGN STANDARD)
DIN EN 3295:1992
Aerospace series; shaft-nuts, self-locking, in FE-PA92HT (A286), silver plated (FOREIGN STANDARD)
DIN EN 3295/A1:1999
Aerospace series - Shaft-nuts, self-locking, in FE-PA92HT (A286), silver plated; Amendment A1 (FOREIGN STANDARD)
DIN EN 3294:2008
Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts - Classification: 1210 MPa/730 ?C; German and English version EN 3294:2008 (Foreign Standard)
DIN EN 3293:2008
Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1275 MPa/650 ?C; German and English version EN 3293:2008 (Foreign Standard)
DIN EN 3292:1994
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads (FOREIGN STANDARD)
DIN EN 3291:1994
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads (FOREIGN STANDARD)
DIN EN 3290:1994
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads (FOREIGN STANDARD)
DIN EN 3289:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads (FOREIGN STANDARD)
DIN EN 3288:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads (FOREIGN STANDARD)
DIN EN 3287:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load (FOREIGN STANDARD)
DIN EN 3286:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3285:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3284:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3283:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads (FOREIGN STANDARD)
DIN EN 3282:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads (FOREIGN STANDARD)
DIN EN 3281:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads (FOREIGN STANDARD)
DIN EN 3280:1994
Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification (FOREIGN STANDARD)
DIN EN 3280/A1:2002
Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification; Amendment A1 (FOREIGN STANDARD)
DIN EN 3275:2002
Aerospace series - Pipe coupling 8?30 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002 (FOREIGN STANDARD)
DIN EN 3274:2002
Aerospace series - Pipe coupling 8?30 - Threaded; Geometric configuration (FOREIGN STANDARD)
DIN EN 3273:2006
Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration; German and English version EN 3273:2001 (FOREIGN STANDARD)
DIN EN 3272:2006
Aerospace series - Pipe coupling 8o30' - Dynamic beam seal end for ferrule, welded - Geometric configuration; German and English version EN 3272:2001 (FOREIGN STANDARD)
DIN EN 3269:2006
Aerospace series - Pipe coupling 8o30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001 (FOREIGN STANDARD)
DIN EN 3268:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Pressure plug (FOREIGN STANDARD)
DIN EN 3267:2002
Aerospace series - Washers, bulkhead, in titanium alloy (FOREIGN STANDARD)
DIN EN 3266:2002
Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut (FOREIGN STANDARD)
DIN EN 3264:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Thrust wire nuts (FOREIGN STANDARD)
DIN EN 3247:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead, welded end (FOREIGN STANDARD)
DIN EN 3246:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead (FOREIGN STANDARD)
DIN EN 3245:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, reducer (FOREIGN STANDARD)
DIN EN 3244:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, double ended (FOREIGN STANDARD)
DIN EN 3243:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrule welded, with dynamic beam seal end (FOREIGN STANDARD)
DIN EN 3241:2009
Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), silver coated - Classification: 1100 MPa (at ambient temperature)/425 ?C; German and English version EN 3241:2008 (Foreign Standard)
DIN EN 3240:2008
Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1 100 MPa (at ambient temperature)/425 ?C; German and English version EN 3240:2007 (FOREIGN STANDARD)
DIN EN 3239:1995
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3237:1998
Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100 HT (Inconel 718) - Silver plated internal thread (FOREIGN STANDARD)
DIN EN 3236:1998
Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Silver plated internal thread (FOREIGN STANDARD)
DIN EN 3230:2001
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3229:1993
Aerospace series; nuts, hexagon, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread; classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3228:1993
Aerospace series; nuts, hexagon, plain, reduced height, normal across flats, in steel, cadmium plated; classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3226:1993
Aerospace series; nuts, hexagon, plain, normal height, normal across flats, in steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3225-4:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 4: pre-production and production parts (FOREIGN STANDARD)
DIN EN 3225-3:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 3: hot compacted forging stock (FOREIGN STANDARD)
DIN EN 3225-2:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 2: atomized powder (FOREIGN STANDARD)
DIN EN 3225-1:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 3220:1988
Aerospace series; heat resisting nickel base alloy (Ni-P101 HT); cold worked and softened; bar and wire for continuous forging or extrusion for fasteners 3 D 30 mm (FOREIGN STANDARD)
DIN EN 3219:1988
Aerospace series; heat resisting nickel base alloy (Ni-P100 HT); cold worked and softened; bar and wire for continuous forging or extrusion for fasteners 3 D 30 mm (FOREIGN STANDARD)
DIN EN 3218-011:2006
Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard; German and English version EN 3218-011:2006 (FOREIGN STANDARD)
DIN EN 3218-010:2006
Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard; German and English version EN 3218-010:2006 (FOREIGN STANDARD)
DIN EN 3218-009:2006
Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard; German and English version EN 3218-009:2006 (FOREIGN STANDARD)
DIN EN 3218-008:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-008:2006 (FOREIGN STANDARD)
DIN EN 3218-007:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-007:2006 (FOREIGN STANDARD)
DIN EN 3218-006:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-006:2006 (FOREIGN STANDARD)
DIN EN 3218-005:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-005:2006 (FOREIGN STANDARD)
DIN EN 3218-002:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006 (FOREIGN STANDARD)
DIN EN 3218-001:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 001: Technical specification; German and English version EN 3218-001:2006 (FOREIGN STANDARD)
DIN EN 3212:1995
Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution (FOREIGN STANDARD)
DIN EN 3207:1998
Aerospace series - Rubber compounds - Technical specification (FOREIGN STANDARD)
DIN EN 3202:1996
Aerospace series - Holes and traps for T-head bolts - Design standard (FOREIGN STANDARD)
DIN EN 3201:2009
Aerospace series - Holes for metric threaded fasteners - Design standard; German and English version EN 3201:2008 (Foreign Standard)
DIN EN 3199:1994
Aerospace series - Lead-acid batteries for aircraft - Technical specification (FOREIGN STANDARD)
DIN EN 3197:1994
Aerospace series; installation of aircraft electrical and optical interconnection systems (FOREIGN STANDARD)
DIN EN 3196:1994
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3163:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, softened, forging stock a or D 300 mm; German and English version EN 3163:2007 (FOREIGN STANDARD)
DIN EN 3162:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a 6 mm, R<(Index)m> 930 MPa; German and English version EN 3162:2007 (FOREIGN STANDARD)
DIN EN 3161:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, R<(Index)m> 930 MPa; German and English version EN 3161:2007 (FOREIGN STANDARD)
DIN EN 3160:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, R<(Index)m> 1310 MPa; German and English version EN 3160:2007 (FOREIGN STANDARD)
DIN EN 3155-075:2009
Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard; German and English version EN 3155-075:2009 (Foreign Standard)
DIN EN 3155-074:2009
Aerospace series - Electrical contacts used in elements of connection - Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R - Product standard; German and English version EN 3155-074:2009 (Foreign Standard)
DIN EN 3155-071:2009
Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-071:2007 (Foreign Standard)
DIN EN 3155-070:2009
Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-070:2007 (Foreign Standard)
DIN EN 3155-069:2009
Aerospace series - Electrical contacts used in elements of connection - Part 069: Contacts, electrical, coaxial, size 16, female, type D, solder, class P - Product standard; English version prEN 3155-069:2008 (Foreign Standard)
DIN EN 3155-068:2009
Aerospace series - Electrical contacts used in elements of connection - Part 068: Contacts, electrical, coaxial, size 08, female, type D, solder, class R - Product standard; English version prEN 3155-068:2008 (Foreign Standard)
DIN EN 3155-067:2009
Aerospace series - Electrical contacts used in elements of connection - Part 067: Contacts, electrical, coaxial, size 08, male, type D, solder, class R - Product standard; English version prEN 3155-067:2008 (Foreign Standard)
DIN EN 3155-066:2007
Aerospace series - Electrical contacts used in elements of connection - Part 066: Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard; German and English version EN 3155-066:2006 (FOREIGN STANDARD)
DIN EN 3155-065:2007
Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard; German and English version EN 3155-065:2006 (FOREIGN STANDARD)
DIN EN 3155-064:2009
Aerospace series - Electrical contacts used in elements of connection - Part 064: Contacts, electrical, coaxial, 50 ohms, size 1, female, type D, solder, class R - Product standard; German and English version EN 3155-064:2009 (Foreign Standard)
DIN EN 3155-063:2009
Aerospace series - Electrical contacts used in elements of connection - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R - Product standard; German and English version EN 3155-063:2009 (Foreign Standard)
DIN EN 3155-061:2007
Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard; German and English version EN 3155-061:2006 (FOREIGN STANDARD)
DIN EN 3155-060:2007
Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard; German and English version EN 3155-060:2006 (FOREIGN STANDARD)
DIN EN 3155-059:2007
Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard; German and English version EN 3155-059:2006 (FOREIGN STANDARD)
DIN EN 3155-058:2007
Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R - Product standard; German and English version EN 3155-058:2006 (FOREIGN STANDARD)
DIN EN 3155-057:2007
Aerospace series - Electrical contacts used in elements of connection - Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T - Product standard; German and English version EN 3155-057:2006 (FOREIGN STANDARD)
DIN EN 3155-056:2007
Aerospace series - Electrical contacts used in elements of connection - Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T - Product standard; German and English version EN 3155-056:2006 (FOREIGN STANDARD)
Aerospace series - Anaerobic polymerisable compounds - Technical specification (FOREIGN STANDARD)
DIN EN 3792:1995
Aerospace series - Holes for 100? countersunk head screws - Design standard; German and English version EN 3782:2008 (Foreign Standard)
DIN EN 3782:2008
Aerospace series - Grooves for spiral wound retaining rings - Design standard; German and English version EN 3781:2008 (Foreign Standard)
DIN EN 3781:2008
Aerospace series - Polycarbonate sheet - Dimensions (FOREIGN STANDARD)
DIN EN 3779:2002
Aerospace series - Pins, quick release, two balls, double acting, single locking, "L" type handle, in corrosion resisting steel (FOREIGN STANDARD)
DIN EN 3778:1999
Aerospace series - Pins, quick release, single and double acting - Technical specification (FOREIGN STANDARD)
DIN EN 3777:1999
Aerospace series - Pins, quick release, two balls, single acting, single locking, "L" type handle, in corrosion resisting steel (FOREIGN STANDARD)
DIN EN 3776:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 004: UNC thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3774-004:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 003: Metric thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3774-003:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 3774-001:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 004: UNC thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3773-004:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 003: Metric thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3773-003:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 3773-001:1999
Aerospace series - Nuts, bihexagonal, plain, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3771:1999
Aerospace series - Electrolytic polishing of corrosion resistant steels and heat resisting alloys (FOREIGN STANDARD)
DIN EN 3769:1997
Aerospace series; nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3768:1993
Aerospace series - Rivets, blind, nut plate, 100? countersunk head, in heat resisting steel, passivated, metric series (FOREIGN STANDARD)
DIN EN 3767:1996
Aerospace series - Rivets, blind, nut plate, universal head, in heat resisting steel, passivated, metric series (FOREIGN STANDARD)
DIN EN 3766:1996
Aerospace series - Electrolytic silver plating for general use - Steels, heat resisting alloys, copper and copper alloys (FOREIGN STANDARD)
DIN EN 3765:1997
Aerospace series - Washers, concave, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 3764:1997
Aerospace series - Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3763:1997
Aerospace series - Heat resisting alloy FE-PA2601, softened and cold worked; wire for forged fasteners D 15 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 3762:1994
Aerospace series - Heat resisting alloy FE-PA2601, softened and cold worked; bar for forged fasteners D 50 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 3761:1994
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3760:1996
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3759:1996
Aerospace series - Simplex high speed data transmission system (FOREIGN STANDARD)
DIN EN 3758:1998
Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3757:1999
Aerospace series; nuts, anchor, self-locking, fixed, 60? corner, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3754:1993
Aerospace series; nuts, anchor, self-locking, fixed, 60? corner, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3753:1993
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 oC - Technical specification; German and English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3752:2005
Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3751:1997
Aerospace series; nuts, anchor, self-locking, fixed, 90? corner, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3750:1993
Aerospace series - O-ring grooves - Dimensions; German and English version EN 3748:2001 (FOREIGN STANDARD)
DIN EN 3748:2002
Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Technical specification; German and English version EN 3747:2007 (FOREIGN STANDARD)
DIN EN 3747:2008
Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2007 (Foreign Standard)
DIN EN 3746:2008
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement; German and English version EN 3745-705:2007 (Foreign Standard)
DIN EN 3745-705:2009
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability; German and English version EN 3745-701:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-701:2002
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation; German and English version EN 3745-603:2008 (Foreign Standard)
DIN EN 3745-603:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity; German and English version EN 3745-602:2008 (Foreign Standard)
DIN EN 3745-602:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3745-601:2007 (Foreign Standard)
DIN EN 3745-601:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend; English version prEN 3745-514:2008 (Foreign Standard)
DIN EN 3745-514:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance; German and English version EN 3745-513:2005 (FOREIGN STANDARD)
DIN EN 3745-513:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance; German and English version EN 3745-512:2005 (FOREIGN STANDARD)
DIN EN 3745-512:2006
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-511:2002
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 510: Bending test; German and English version EN 3745-510:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-510:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 509: Kink test; German and English version EN 3745-509:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-509:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 508: Torsion; German and English version EN 3745-508:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-508:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through; German and English version EN 3745-507:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-507:2003
Aerospace series - Fibres and cables, optical, aircraft use; test methods - Part 506: Impact resistance (FOREIGN STANDARD)
DIN EN 3745-506:2000
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength; German and English version EN 3745-505:2007 (Foreign Standard)
DIN EN 3745-505:2009
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-504:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion; German and English version EN 3745-503:2005 (FOREIGN STANDARD)
DIN EN 3745-503:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres; German and English version EN 3745-502:2005 (FOREIGN STANDARD)
DIN EN 3745-502:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test; German and English version EN 3745-501:2005 (FOREIGN STANDARD)
DIN EN 3745-501:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance; German and English version EN 3745-412:2005 (FOREIGN STANDARD)
DIN EN 3745-412:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids; German and English version EN 3745-411:2007 (FOREIGN STANDARD)
DIN EN 3745-411:2008
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life; German and English version EN 3745-410:2007 (Foreign Standard)
DIN EN 3745-410:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability; German and English version EN 3745-407:2005 (FOREIGN STANDARD)
DIN EN 3745-407:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test; German and English version EN 3745-406:2005 (FOREIGN STANDARD)
DIN EN 3745-406:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock; German and English version EN 3745-404:2005 (FOREIGN STANDARD)
DIN EN 3745-404:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling; German and English version EN 3745-402:2005 (FOREIGN STANDARD)
DIN EN 3745-402:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing; German and English version EN 3745-401:2005 (FOREIGN STANDARD)
DIN EN 3745-401:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling; German and English version EN 3745-306:2005 (FOREIGN STANDARD)
DIN EN 3745-306:2006
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-305:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth; German and English version EN 3745-303:2007 (Foreign Standard)
DIN EN 3745-303:2009
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 302: Numerical aperture; German and English version EN 3745-302:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-302:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 301: Attenuation; German and English version EN 3745-301:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-301:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability; German and English version EN 3745-205:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-205:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions; German and English version EN 3745-203:2008 (Foreign Standard)
DIN EN 3745-203:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions; German and English version EN 3745-202:2005 (FOREIGN STANDARD)
DIN EN 3745-202:2006
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 201: Visual examination; German and English version EN 3745-201:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-201:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General; German and English version EN 3745-100:2008 (Foreign Standard)
DIN EN 3745-100:2009
Aerospace series; straight pins, spring type, light duty, in corrosion resisting spring steel, passivated (FOREIGN STANDARD)
DIN EN 3744:1993
Aerospace series; straight pins, spring type, heavy duty, in corrosion resisting spring steel, passivated (FOREIGN STANDARD)
DIN EN 3743:1993
Aerospace series - Nuts, clip, metric - Installation holes and assembly; German and English version EN 3741:2004 (FOREIGN STANDARD)
DIN EN 3741:2005
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3740:1996
Aerospace series; rivets, solid, 100? normal countersunk head, in titanium alloy Ti 45,5 Cb; metric series (FOREIGN STANDARD)
DIN EN 3739:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in titanium alloy Ti 45,5 Cb; metric series (FOREIGN STANDARD)
DIN EN 3738:1992
Aerospace series - Titanium alloy TI-P65002 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3737:1996
Aerospace series - Titanium alloy TI-P65002 - Grade 2, solution treated and aged, forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3736:1996
Aerospace series - Titanium alloy TI-P65002, solution treated and aged; bar for machining D 75 mm (FOREIGN STANDARD)
DIN EN 3735:1994
DIN EN 3733-108:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 108: Cable support boot - Product standard; German and English version EN 3733-108:2008 (Foreign Standard)
DIN EN 3733-108:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 106: Receptacle connector dummy jam nut - Product standard; German and English version EN 3733-106:2008 (Fo
DIN EN 3733-106:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 106: Receptacle connector dummy jam nut - Product standard; German and English version EN 3733-106 (Foreign
DIN EN 3733-106:2008
DIN EN 3733-105:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 105: Receptacle connector dummy two holes fixing - Product standard; German and English version EN 3733-105
DIN EN 3733-105:2008
DIN EN 3733-104:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 104: Receptacle connector dummy four holes fixing - Product standard; German and English Version EN 3733-10
DIN EN 3733-104:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 103: Protective cover jam nut receptacle - Product standard; German and English version EN 3733-103:2008 (F
DIN EN 3733-103:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 101: Protective cover receptacle - Product standard; German and English version EN 3733-101:2008 (Foreign S
DIN EN 3733-101:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3733-009:2007
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Pr (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3733-008:2007
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English ver
DIN EN 3733-007:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 006: Receptable, connector, jam nut fixing for cable according to EN 4532 - Product standard; German and English
DIN EN 3733-006:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532 - Product standard; German and English ver
DIN EN 3733-005:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 004: Receptacle, connector, four hole fixing cable to EN 4532, Product standard; German and English version EN 37
DIN EN 3733-004:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 003: Plug connector for cable according to EN 4532 - Product standard; German and English version EN 3733-003:200
DIN EN 3733-003:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 002: List of product standards; German and English version EN 3733-002:2008 (Foreign Standard)
DIN EN 3733-002:2008
Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 3730:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3730:2003
Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3729:2008 (Foreign Standard)
DIN EN 3729:2008
Aerospace series - Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3728:2008 (Foreign Standard)
DIN EN 3728:2008
Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification; German and English version EN 3727:2006 (FOREIGN STANDARD)
DIN EN 3727:2007
Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 oC; German and English version EN 3726:2004 (FOREIGN STANDARD)
DIN EN 3726:2005
Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004 (FOREIGN STANDARD)
DIN EN 3725:2005
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004 (FOREIGN STANDARD)
DIN EN 3724:2005
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3723:1996
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3722:1995
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3721:1995
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3720:1995
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard; German and English version EN 3719:2005 (FOREIGN STANDARD)
DIN EN 3719:2006
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes (FOREIGN STANDARD)
DIN EN 3718:1996
Aerospace series - Tubes - Selection for engines fluid systems; German and English version EN 3717:2008 (Foreign Standard)
DIN EN 3717:2008
Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 006: Crimp plug - Product standard; German and English version EN 3716-006:2006 (FOREIGN STANDARD)
DIN EN 3716-006:2008
Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 005: Crimp receptacle - Product standard; German and English version EN 3716-005:2006 (FOREIGN STANDARD)
DIN EN 3716-005:2008
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard; German and English version EN 3716-004:2006 (FOREIGN STANDARD)
DIN EN 3716-004:2007
Aerospace series - Connectors, single-way with traxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard; German and English version EN 3716-003:2006 (FOREIGN STANDARD)
DIN EN 3716-003:2007
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards; German and English version EN 3716-002:2006 (FOREIGN STANDARD)
DIN EN 3716-002:2007
Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification; German and English version EN 3716-001:2006 (FOREIGN STANDARD)
DIN EN 3716-001:2007
Aerospace series; nuts, anchor, self-locking, floating, two lug, with counterbore, in heat resisting steel, silver plated; classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3714:1993
Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset; German and English version EN 3711:2008 (Foreign Standard)
DIN EN 3711:2008
Aerospace series - Sockets, bi-hexagonal - Technical specification; German and English version EN 3710:2008 (Foreign Standard)
DIN EN 3710:2008
Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification; German and English version EN 3709:2006 (FOREIGN STANDARD)
DIN EN 3709:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard; German and English version EN 3708-005:2006 (FOREIGN STANDARD)
DIN EN 3708-005:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard; German and English version EN 3708-004:2006 (FOREIGN STANDARD)
DIN EN 3708-004:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard; German and English version EN 3708-003:2006 (FOREIGN STANDARD)
DIN EN 3708-003:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification; German and English version EN 3708-002:2006 (FOREIGN STANDARD)
DIN EN 3708-002:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 001: Technical specification; German and English version EN 3708-001:2006 (FOREIGN STANDARD)
DIN EN 3708-001:2007
Aerospace series - Heat release rate for materials and products under the influence of radiating heat and flames - Test method (FOREIGN STANDARD)
DIN EN 3703:1995
Aerospace series; static inverters for aircraft; technical specification (FOREIGN STANDARD)
DIN EN 3700:1993
Aerospace series - Washers in heat resisting steel; German and English version EN 3696:2001 (FOREIGN STANDARD)
DIN EN 3696:2003
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 ?C; German and English version EN 3686:2008 + AC:2009 (Foreign Standard)
DIN EN 3686:2009
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa/650 ?C; German and English version EN 3686:2008 (Foreign Standard)
DIN EN 3686:2008
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa/650 ?C - Technical specification; German and English version EN 3685:2008 (Foreign Standard)
DIN EN 3685:2008
Aerospace series - Test methods - Titanium alloy wrought products - Determination of transus temperature - Metallographic method; German and English version EN 3684:2007 (FOREIGN STANDARD)
DIN EN 3684:2007
Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary content - Point count method and line intercept method; German and English version EN 3683:2007 (FOREIGN STANDARD)
DIN EN 3683:2007
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 009: Size 4 plug - Product standard; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-009:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 008: Size 4 receptacle - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-008:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 007: Size 3 plug - Product standard; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-007:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 006: Size 3 receptacle - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-006:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 005: Size 2 plug - Product standard; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-005:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 004: Size 2 receptacle - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-004:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 003: Inserts - Product standard; German and Englis (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-003:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 002: Specification of performance and contact arra (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-002:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 001: Technical specification; German and English v (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-001:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) air melted, solution treated - Seamless tube for pressure applications D 50 mm; 0,5 mm a 5 mm, 500 MPa R<(Index)m> 750 MPa (FOREIGN STANDARD)
DIN EN 3680:1998
Aerospace series - Steel FE-PM3902 (X7CrNiAl17-7) air melted, solution treated and precipitation hardened - Plate, 6 mm a 15 mm, 1240 MPa R<(Index)m> 1450 MPa (FOREIGN STANDARD)
DIN EN 3679:1998
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 930 MPa; German and English version EN 3678:2007 (FOREIGN STANDARD)
DIN EN 3678:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 1 310 MPa; German and English version EN 3677:2007 (FOREIGN STANDARD)
DIN EN 3677:2007
Aerospace series - Inserts, thin wall, self-locking - Design standard (FOREIGN STANDARD)
DIN EN 3676:1998
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30? swage - Classification: 1210 MPa (at ambient temperature)/730 ?C; German and English version EN 3672:2008 (Foreign Standard)
DIN EN 3672:2008
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D 250 mm; German and English version EN 3671:2007 (FOREIGN STANDARD)
DIN EN 3671:2007
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D 250 mm; German and English version EN 3668:2006 (FOREIGN STANDARD)
DIN EN 3668:2007
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked; bar for forged fasteners D 50 mm, 1550 MPa R<(Index)m> 1830 MPa (FOREIGN STANDARD)
DIN EN 3666:1996
Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys (FOREIGN STANDARD)
DIN EN 3665:1997
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard; German and English version EN 3662-006:2006 (FOREIGN STANDARD)
DIN EN 3662-006:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard; German and English version EN 3662-005:2006 (FOREIGN STANDARD)



Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment