Cheapest & Latest DIN Standard (PDF) (22)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


DIN EN 2591-507:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity; German and English version EN 2591-507:2002 (FOREIGN STANDARD)
DIN EN 2591-506:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools; German and English version EN 2591-506:2001 (FOREIGN STANDARD)
DIN EN 2591-505:2002
Aeospace series - Elements of electrical and optical connection; Test methods - Part 505: Contact protection effectiveness (scoop-proof); German and English version EN 2591-505:2001 (FOREIGN STANDARD)
DIN EN 2591-503:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 503: Contact deformation after crimping; German and English version EN 2591-503:2001 (FOREIGN STANDARD)
DIN EN 2591-502:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 502: Restricted entry; German and English version EN 2591-502:2001 (FOREIGN STANDARD)
DIN EN 2591-501:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 501: Soft solderability; German and English version EN 2591-501:2002 (FOREIGN STANDARD)
DIN EN 2591-428:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs; German and English version EN 2591-428:2002 (FOREIGN STANDARD)
DIN EN 2591-423:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength; German and English version EN 2591-423:2005 (FOREIGN STANDARD)
DIN EN 2591-422:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 422: Locking wire hole strength; German and English version EN 2591-422:2002 (FOREIGN STANDARD)
DIN EN 2591-421:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 421: Free fall; German and English version EN 2591-421:2002 (FOREIGN STANDARD)
DIN EN 2591-420:2007
Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2006 (FOREIGN STANDARD)
DIN EN 2591-419:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 419: Stability of male contacts in insert; German and English version EN 2591-419:2001 (FOREIGN STANDARD)
DIN EN 2591-418:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 418: Gauge insertion/extraction forces (female contacts); German and English version EN 2591-418:2001 (FOREIGN STANDARD)
DIN EN 2591-417:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 417: Tensile strength (crimped connection); German and English version EN 2591-417:2001 (FOREIGN STANDARD)
DIN EN 2591-416:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength; German and English version EN 2591-416:2001 (FOREIGN STANDARD)
DIN EN 2591-415:2002
Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001 (FOREIGN STANDARD)
DIN EN 2591-414:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 414: Unmating of lanyard release connectors (FOREIGN STANDARD)
DIN EN 2591-413:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system (FOREIGN STANDARD)
DIN EN 2591-412:1999
Aerospace series -Elements of electrical and optical connection; test methods - Part 412: Contact insertion and extraction forces (FOREIGN STANDARD)
DIN EN 2591-411:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 411: Insert retention in housing (torsional) (FOREIGN STANDARD)
DIN EN 2591-410:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 410: Insert retention in housing (axial) (FOREIGN STANDARD)
DIN EN 2591-409:1999
Aerospace series -Elements of electrical and optical connection; test methods - Part 409: Contact retention in insert (FOREIGN STANDARD)
DIN EN 2591-408:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 408: Mating and unmating forces (FOREIGN STANDARD)
DIN EN 2591-407:1999
Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals (FOREIGN STANDARD)
DIN EN 2591-406:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 406: Mechanical endurance (FOREIGN STANDARD)
DIN EN 2591-405:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 405: Axial load (FOREIGN STANDARD)
DIN EN 2591-404:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 404: Transverse load (FOREIGN STANDARD)
DIN EN 2591-403:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 403: Sinusoidal and random vibration (FOREIGN STANDARD)
DIN EN 2591-402:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 402: Shock (FOREIGN STANDARD)
DIN EN 2591-325:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 325: Ice resistance; German and English version EN 2591-325:2002 (FOREIGN STANDARD)
DIN EN 2591-324:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing (FOREIGN STANDARD)
DIN EN 2591-323:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 323: Thermal shock (FOREIGN STANDARD)
DIN EN 2591-322:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity (FOREIGN STANDARD)
DIN EN 2591-321:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 321: Damp heat, cyclic test (FOREIGN STANDARD)
DIN EN 2591-320:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 320: Simulated solar radiation at ground level (FOREIGN STANDARD)
DIN EN 2591-319:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections (FOREIGN STANDARD)
DIN EN 2591-318:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 318: Fire-resistance (FOREIGN STANDARD)
DIN EN 2591-317:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 317: Flammability (FOREIGN STANDARD)
DIN EN 2591-316:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 316: Ozone resistance (FOREIGN STANDARD)
DIN EN 2591-315:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 315: Fluid resistance (FOREIGN STANDARD)
DIN EN 2591-314:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 314: Immersion at low air pressure (FOREIGN STANDARD)
DIN EN 2591-313:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 313: Artificial rain (FOREIGN STANDARD)
DIN EN 2591-312:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage (FOREIGN STANDARD)
DIN EN 2591-311:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 311: Low air pressure (FOREIGN STANDARD)
DIN EN 2591-310:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 310: Cold (FOREIGN STANDARD)
DIN EN 2591-309:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 309: Dry heat (FOREIGN STANDARD)
DIN EN 2591-308:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 308: Sand and dust (FOREIGN STANDARD)
DIN EN 2591-307:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 307: Salt mist (FOREIGN STANDARD)
DIN EN 2591-306:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 306: Mould growth (FOREIGN STANDARD)
DIN EN 2591-305:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 305: Rapid change of temperature (FOREIGN STANDARD)
DIN EN 2591-304:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 304: Damp heat steady state (FOREIGN STANDARD)
DIN EN 2591-303:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 303: Cold/low pressure and damp heat (FOREIGN STANDARD)
DIN EN 2591-302:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 302: Climatic sequence (FOREIGN STANDARD)
DIN EN 2591-226:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 226: Corona level; German and English version EN 2591-226:2007 (Foreign Standard)
DIN EN 2591-225:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 225: RF high potential withstanding voltage; German and English version EN 2591-225:2007 (Foreign Standard)
DIN EN 2591-224:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage; German and English version EN 2591-224:2007 (Foreign Standard)
DIN EN 2591-223:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact; German and English version EN 2591-223:2007 (Foreign Standard)
DIN EN 2591-222:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.); German and English version EN 2591-222:2007 (Foreign Standard)
DIN EN 2591-221:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR); German and English version EN 2591-221:2007 (Foreign Standard)
DIN EN 2591-220:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling; German and English version EN 2591-220:2005 (FOREIGN STANDARD)
DIN EN 2591-219:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices; German and English version EN 2591-219:2002 (FOREIGN STANDARD)
DIN EN 2591-218:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling; German and English version EN 2591-218:2002 (FOREIGN STANDARD)
DIN EN 2591-217:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices; German and English version EN 2591-217:2002 (FOREIGN STANDARD)
DIN EN 2591-216:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 216: Engagement depth of contacts (FOREIGN STANDARD)
DIN EN 2591-214:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse; German and English version EN 2591-214:2005 (FOREIGN STANDARD)
DIN EN 2591-213:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz (FOREIGN STANDARD)
DIN EN 2591-212:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance; German and English version EN 2591-212:2005 (FOREIGN STANDARD)
DIN EN 2591-211:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance; German and English version EN 2591-211:2002 (FOREIGN STANDARD)
DIN EN 2591-210:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 210: Electrical overload (FOREIGN STANDARD)
DIN EN 2591-209:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 209: Current temperature derating (FOREIGN STANDARD)
DIN EN 2591-208:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 208: Temperature rise due to rated current (FOREIGN STANDARD)
DIN EN 2591-207:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 207: Voltage proof test (FOREIGN STANDARD)
DIN EN 2591-206:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 206: Measurement of insulation resistance (FOREIGN STANDARD)
DIN EN 2591-205:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 205: Housing (shell) electrical continuity (FOREIGN STANDARD)
DIN EN 2591-204:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 204: Discontinuity of contacts in the microsecond range (FOREIGN STANDARD)
DIN EN 2591-203:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 203: Electrical continuity at microvolt level (FOREIGN STANDARD)
DIN EN 2591-202:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 202: Contact resistance at rated current (FOREIGN STANDARD)
DIN EN 2591-201:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 201: Contact resistance, low level (FOREIGN STANDARD)
DIN EN 2591-102:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 102: Examination of dimensions and mass (FOREIGN STANDARD)
DIN EN 2591-101:1994
Aerospace series - Elements of electrical and optical connection; test methods - Part 101: Visual examination (FOREIGN STANDARD)
DIN EN 2591-100:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General; German and English version EN 2591-100:2005 (FOREIGN STANDARD)
DIN EN 2590:1993
Aerospace series; steel; sheets and plates, hot rolled; dimensions (FOREIGN STANDARD)
DIN EN 2589:1995
Aerospace series - Steel - Sheet and strip, cold rolled; thickness 0,1 mm a 3 mm; dimensions (FOREIGN STANDARD)
DIN EN 2588:2006
Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads; German and English version EN 2588:2006 (FOREIGN STANDARD)
DIN EN 2585:2006
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2001 (FOREIGN STANDARD)
DIN EN 2583:1997
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 ?C; technical specification (FOREIGN STANDARD)
DIN EN 2573:2007
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - R<(Index)m> 780 MPa - Wire - 0,25 mm D<(Index)e> 3 mm; German and English version EN 2573:2007 (FOREIGN STANDARD)
DIN EN 2570:1996
Aerospace series - Nickel-cadmium batteries - Technical specification (FOREIGN STANDARD)
DIN EN 2568:1995
Aerospace series - Fluorocarbon rubber (FPM) - Hardness 90 IRHD (FOREIGN STANDARD)
DIN EN 2567:1995
Aerospace series - Fluorocarbon rubber (FPM) - Hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 2566:1995
Aerospace series - Fluorocarbon rubber (FPM) - Hardness 70 IRHD (FOREIGN STANDARD)
DIN EN 2565:1993
Aerospace series; preparation of carbon fibre reinforced resin panels for test purposes (FOREIGN STANDARD)
DIN EN 2564:1998
Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents (FOREIGN STANDARD)
DIN EN 2563:1997
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength (FOREIGN STANDARD)
DIN EN 2562:1997
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction (FOREIGN STANDARD)
DIN EN 2561:1995
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction (FOREIGN STANDARD)
DIN EN 2560:1998
Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow (FOREIGN STANDARD)
DIN EN 2559:1997
Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area (FOREIGN STANDARD)
DIN EN 2558:1997
Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content (FOREIGN STANDARD)
DIN EN 2557:1997
Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area (FOREIGN STANDARD)
DIN EN 2556:1999
Aerospace series - Rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series (FOREIGN STANDARD)
DIN EN 2555:1999
Aerospace series - Rivets, solid, 100? countersunk normal head with dome, in aluminium alloy 5056A, inch based series (FOREIGN STANDARD)
DIN EN 2553:1999
Aerospace series - Rivets, solid, 100? countersunk normal head with dome, in aluminium alloy 2017A, inch based series (FOREIGN STANDARD)
DIN EN 2552:1999
Aerospace series - Rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series (FOREIGN STANDARD)
DIN EN 2551:1999
Aerospace series - Rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 2117, inch based series (FOREIGN STANDARD)
DIN EN 2549:2007
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2546:2006
Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions; German and English version EN 2546:2006 (FOREIGN STANDARD)
DIN EN 2545-3:1995
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 3: Pre-productions and production castings (FOREIGN STANDARD)
DIN EN 2545-2:1995
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock (FOREIGN STANDARD)
DIN EN 2545-1:1995
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 2543:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm a 2 mm - For prevailing torque nuts; German and English version EN 2543:2009 (Foreign Standard)
DIN EN 2542:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and Wire - D<(Index)e> 40 mm - For prevailing torque nuts; German and English version EN 2542:2008 (Foreign Standard)
DIN EN 2540:1998
Aerospace series - Steel FE-PM3902 (X7CrNiAl17-7) air melted, solution treated and precipitation hardened - Sheet and strip, a 6 mm, 1240 MPa R<(Index)m> 1450 MPa (FOREIGN STANDARD)
DIN EN 2536:1995
Aerospace series - Hard anodizing of aluminium alloys (FOREIGN STANDARD)
DIN EN 2535:1994
Aerospace series - Vacuum deposition of cadmium (FOREIGN STANDARD)
DIN EN 2516:1997
Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys (FOREIGN STANDARD)
DIN EN 2512:2000
Aerospace series - Aluminium alloy AL-P7175-T7351 - Plate, 6 mm a 100 mm (FOREIGN STANDARD)
DIN EN 2511:2006
Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm a 100 mm; German and English version EN 2511:2005 (FOREIGN STANDARD)
DIN EN 2500-5:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 5: Specific requirements for steel; Inactive for new design (FOREIGN STANDARD)
DIN EN 2500-4:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 4: Specific requirements for titanium and titanium alloys; inactive for new design (FOREIGN STANDARD)
DIN EN 2500-3:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 3: Specific requirements for heat resisting alloys; Inactive for new design (FOREIGN STANDARD)
DIN EN 2500-2:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 2: Specific requirements for aluminium, aluminium alloys and magnesium alloys; inactive for new design (FOREIGN STANDARD)
DIN EN 2491:1997
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods (FOREIGN STANDARD)
DIN EN 2489:1995
Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids (FOREIGN STANDARD)
DIN EN 2486:2006
Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005 (FOREIGN STANDARD)
DIN EN 2485:1998
Aerospace series - Aluminium alloy AL-P2214 - Forging stock (FOREIGN STANDARD)
DIN EN 2480:2009
Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa R<(Index)m> 1400 MPa - Bars - D<(Index)e> 75 mm; German and English version EN 2480:2008 (Foreign Standard)
DIN EN 2478:2009
Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1220 MPa R<(Index)m> 1370 MPa - Bars - D<(Index)e> 40 mm; German and English version EN 2478:2008 (Foreign Standard)
DIN EN 2475:1999
Aerospace series - Steel FE-PL2106 (30CrNiMo8), air melted, hardened and tempered - Bar for machining D<(Index)e> 100 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 2469:2007
Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm D 12,5 mm - 450 MPa R<(Index)m> 650 MPa; German and English version EN 2469:2007 (FOREIGN STANDARD)
DIN EN 2467:2008
Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm a 20 mm - 520 MPa R<(Index)m> 670 MPa; German and English version EN 2467:2007 (Foreign Standard)
DIN EN 2466:2009
Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - D<(Index)e> 100 mm; English version prEN 2466:2008 (Foreign Standard)
DIN EN 2465:2008
Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa R<(Index)m> 680 MPa - Bar for machining - 4 mm D<(Index)e> 100 mm; German and English version EN 2465:2007 (FOREIGN STANDARD)
DIN EN 2461:2009
Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa R<(Index)m> 800 MPa - Forgings - D<(Index)e> 70 mm; English version prEN 2461:2008 (Foreign Standard)
DIN EN 2460:2009
Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa R<(Index)m> 800 MPa - Bars - D<(Index)e> 70 mm; English version prEN 2460:2008 (Foreign Standard)
DIN EN 2448:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa R<(Index)m> 1100 MPa - Bars - D<(Index)e> 40 mm; German and English version EN 2448:2008 (Foreign Standard)
DIN EN 2446:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - 1100 MPa R<(Index)m> 1300 MPa - Bars - D<(Index)e> 25 mm; German and English version EN 2446:2008 (Foreign Standard)
DIN EN 2445:1999
Aerospace series - Steel FE-PL8201 (41NiCrMo2), air melted, hardened and tempered - Hand and die forgings D<(Index)e> 45 mm, 900 MPa R<(Index)m> 1100 MPa (FOREIGN STANDARD)
DIN EN 2439:2009
Aerospace series - Steel FE-PL2102 (34NiCr6) - 900 MPa R<(Index)m> 1100 MPa - Forgings - D<(Index)e> 40 mm; English version prEN 2439:2008 (Foreign Standard)
DIN EN 2438:2009
Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa R<(Index)m> 1100 MPa - Bars - D<(Index)e> 40 mm; German and English version EN 2438:2008 (Foreign Standard)
DIN EN 2436-006:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application; German and English version EN 2436-006:2006 (FOREIGN STANDARD)
DIN EN 2436-005:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance; German and English version EN 2436-005:2006 (FOREIGN STANDARD)
DIN EN 2436-004:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2436-004:2006 (FOREIGN STANDARD)
DIN EN 2436-003:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2436-003:2006 (FOREIGN STANDARD)
DIN EN 2436-002:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2436-002:2006 (FOREIGN STANDARD)
DIN EN 2436-001:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements; German and English version EN 2436-001:2006 (FOREIGN STANDARD)
DIN EN 2435-005:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application; German and English version EN 2435-005:2006 (FOREIGN STANDARD)
DIN EN 2435-004:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2435-004:2006 (FOREIGN STANDARD)
DIN EN 2435-003:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2435-003:2006 (FOREIGN STANDARD)
DIN EN 2435-002:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2435-002:2006 (FOREIGN STANDARD)
DIN EN 2435-001:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001: Minimum requirements; German and English version EN 2435-001:2006 (FOREIGN STANDARD)
DIN EN 2434-005:2007
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application; German and English version EN 2434-005:2006 (FOREIGN STANDARD)
DIN EN 2432:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD (FOREIGN STANDARD)
DIN EN 2431:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 2430:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD (FOREIGN STANDARD)
DIN EN 2429:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD (FOREIGN STANDARD)
DIN EN 2428:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD (FOREIGN STANDARD)
DIN EN 2424:2008
Aerospace series - Marking of aerospace products; German and English version prEN 2424:2007 (Foreign Standard)
DIN EN 2422:2006
Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm a 120 mm; German and English version EN 2422:2005 (FOREIGN STANDARD)
DIN EN 2419:2000
Aerospace series - Aluminium alloy AL-P2024-T351 - Plate, 6 mm a 80 mm (FOREIGN STANDARD)
DIN EN 2413:1995
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2407:1999
Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3), solution treated and precipitation treated - Sheet, strip and plate, 0,2 mm a 10 mm (FOREIGN STANDARD)
DIN EN 2405:1999
Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Hand and die forgings, D<(Index)e> 200 mm (FOREIGN STANDARD)
DIN EN 2403:1999
Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) vacuum melted, solution treated and precipitation treated - Precision casting, a or D 50 mm (FOREIGN STANDARD)
DIN EN 2399:2009
Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - R<(Index)m> 900 MPa - Bars for forged bolts - D 25 mm; German and English version EN 2399:2008 (Foreign Standard)
DIN EN 2398:2009
Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - R<(Index)m> 900 MPa - Bars for machined bolts - D 25 mm; German and English version EN 2398:2008 (Foreign Standard)
DIN EN 2395:2006
Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2395:2005 (FOREIGN STANDARD)
DIN EN 2386:1998
Aerospace series - Aluminium alloy AL-P7075-T7352 - Hand forgings a 150 mm (FOREIGN STANDARD)
DIN EN 2385:1993
Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D 125 mm (FOREIGN STANDARD)
DIN EN 2383:1998
Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a 100 mm (FOREIGN STANDARD)
DIN EN 2382:1998
Aerospace series - Aluminium alloy AL-P2214-T6 - Hand and die forgings a 100 mm (FOREIGN STANDARD)
DIN EN 2381:1993
Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mm a 150 mm (FOREIGN STANDARD)
DIN EN 2379:1995
Aerospace series - Fluids for assessment of non-metallic materials (FOREIGN STANDARD)
DIN EN 2378:1995
Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion (FOREIGN STANDARD)
DIN EN 2349-601:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance; German and English version EN 2349-601:2007 (FOREIGN STANDARD)
DIN EN 2349-415:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration; German and English version EN 2349-415:2007 (FOREIGN STANDARD)
DIN EN 2349-413:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random; German and English version EN 2349-413:2007 (FOREIGN STANDARD)
DIN EN 2349-412:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal; German and English version EN 2349-412:2007 (FOREIGN STANDARD)
DIN EN 2349-411:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change; German and English version EN 2349-411:2007 (FOREIGN STANDARD)
DIN EN 2349-410:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 410: Mould; German and English version EN 2349-410:2007 (FOREIGN STANDARD)
DIN EN 2349-409:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance; German and English version EN 2349-409:2007 (FOREIGN STANDARD)
DIN EN 2349-407:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 407: Cold/low pressure and moist heat; German and English version EN 2349-407:2006 (FOREIGN STANDARD)
DIN EN 2349-405:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance; German and English version EN 2349-405:2006 (FOREIGN STANDARD)
DIN EN 2349-402:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray; German and English version EN 2349-402:2006 (FOREIGN STANDARD)
DIN EN 2349-318:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature; German and English version EN 2349-318:2006 (FOREIGN STANDARD)
DIN EN 2349-317:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 317: Service life of coil switching device; German and English version EN 2349-317:2006 (FOREIGN STANDARD)
DIN EN 2349-316:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 316: Mechanical life (Endurance at reduced load); German and English version EN 2349-316:2006 (FOREIGN STANDARD)
DIN EN 2349-312:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load; German and English version EN 2349-312:2006 (FOREIGN STANDARD)
DIN EN 2349-310:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 310: Rupture; German and English version EN 2349-310:2006 (FOREIGN STANDARD)
DIN EN 2349-309:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006 (FOREIGN STANDARD)
DIN EN 2349-308:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 308: Coil current; German and English version EN 2349-308:2006 (FOREIGN STANDARD)
DIN EN 2349-307:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006 (FOREIGN STANDARD)
DIN EN 2349-306:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006 (FOREIGN STANDARD)
DIN EN 2349-305:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006 (FOREIGN STANDARD)
DIN EN 2349-304:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006 (FOREIGN STANDARD)
DIN EN 2349-303:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 303: Dielectric strength; German and English version EN 2349-303:2006 (FOREIGN STANDARD)
DIN EN 2349-302:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 302: Insulation resistance; German and English version EN 2349-302:2006 (FOREIGN STANDARD)
DIN EN 2349-301:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage; German and English version EN 2349-301:2006 (FOREIGN STANDARD)
DIN EN 2349-202:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006 (FOREIGN STANDARD)
DIN EN 2349-201:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection; German and English version EN 2349-201:2006 (FOREIGN STANDARD)
DIN EN 2349:1995
Aerospace series - Requirements and test procedures for switching devices (FOREIGN STANDARD)
DIN EN 2346-004:2007
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 ?C and 260 ?C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2346-003:2007
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 ?C and 260 ?C - Part 003: DL family, single core - Product standard; German and English version EN 2346-003:2006 (FOREIGN STANDARD)
DIN EN 2346-002:2007
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 ?C and 260 ?C - Part 002: General; German and English version EN 2346-002:2006 (FOREIGN STANDARD)
DIN EN 2345-2:1999
Aerospace series - Rivets, solid, in aluminium and aluminium alloy, metric series - Technical specification (FOREIGN STANDARD)
Aerospace series - Electrical contacts used in elements of connection - Part 055: Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T - Product standard; German and English version EN 3155-055:2006 (FOREIGN STANDARD)
DIN EN 3155-055:2007
Aerospace series - Electrical contacts used in elements of connection - Part 054: Contacts, electrical, male, thermocouple NiAl, type C, crimp, class T - Product standard; German and English version EN 3155-054:2006 (FOREIGN STANDARD)
DIN EN 3155-054:2007
Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard; German and English version EN 3155-045:2006 (FOREIGN STANDARD)
DIN EN 3155-045:2007
Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard; German and English version EN 3155-044:2007 (Foreign Standard)
DIN EN 3155-044:2008
Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard; German and English version EN 3155-043:2006 (FOREIGN STANDARD)
DIN EN 3155-043:2006
Aerospace series - Electrical contacts used in elements of connection - Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Product standard; German and English version EN 3155-042:2006 (FOREIGN STANDARD)
DIN EN 3155-042:2006
Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard; German and English version EN 3155-041:2007 (Foreign Standard)
DIN EN 3155-041:2008
Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard; German and English version EN 3155-040:2007 (Foreign Standard)
DIN EN 3155-040:2008
Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard; German and English version EN 3155-039:2007 (Foreign Standard)
DIN EN 3155-039:2008
Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard; German and English version EN 3155-035:2006 (Foreign Standard)
DIN EN 3155-035:2008
Aerospace series - Electrical contacts used in elements of connection - Part 033: Contacts, electrical, coaxial, 50 ohms, size 5, female, type D, crimp, class R - Product standard; German and English version EN 3155-033:2009 (Foreign Standard)
DIN EN 3155-033:2009
Aerospace series - Electrical contacts used in elements of connection - Part 032: Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R - Product standard; German and English version EN 3155-032:2009 (Foreign Standard)
DIN EN 3155-032:2009
Aerospace series - Electrical contacts used in elements of connection - Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Product standard; German and English version EN 3155-031:2006 (FOREIGN STANDARD)
DIN EN 3155-031:2007
Aerospace series - Electrical contacts used in elements of connection - Part 030: Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R - Product standard; German and English version EN 3155-030:2006 (FOREIGN STANDARD)
DIN EN 3155-030:2007
Aerospace series - Electrical contacts used in elements of connection - Part 029: Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R - Product standard; German and English version EN 3155-029:2007 (Foreign Standard)
DIN EN 3155-029:2008
Aerospace series - Electrical contacts used in elements of connection - Part 028: Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R - Product standard; German and English version EN 3155-028:2006 (FOREIGN STANDARD)
DIN EN 3155-028:2007
Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard; German and English version EN 3155-027:2006 (FOREIGN STANDARD)
DIN EN 3155-027:2006
Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard; German and English version EN 3155-026:2006 (FOREIGN STANDARD)
DIN EN 3155-026:2006
Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard; German and English version EN 3155-025:2006 (FOREIGN STANDARD)
DIN EN 3155-025:2007
Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard; German and English version EN 3155-024:2006 (FOREIGN STANDARD)
DIN EN 3155-024:2007
Aerospace series - Electrical contacts used in elements of connection - Part 023: Contacts, electrical rectangular, female, type A, crimp, class R - Product standard; German and English version EN 3155-023:2006 (FOREIGN STANDARD)
DIN EN 3155-023:2006
Aerospace series - Electrical contacts used in elements of connection - Part 022: Contacts, electrical rectangular, male, type A, crimp, class R - Product standard; German and English version EN 3155-022:2006 (FOREIGN STANDARD)
DIN EN 3155-022:2007
Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-019:2005 (FOREIGN STANDARD)
DIN EN 3155-019:2006
Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-018:2005 (FOREIGN STANDARD)
DIN EN 3155-018:2006
Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard; German and English version EN 3155-017:2006 (FOREIGN STANDARD)
DIN EN 3155-017:2007
Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-016:2006 (FOREIGN STANDARD)
DIN EN 3155-016:2007
Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-015:2006 (FOREIGN STANDARD)
DIN EN 3155-015:2007
Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-014:2006 (FOREIGN STANDARD)
DIN EN 3155-014:2007
Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R - Product standard; German and English version EN 3155-013:2006 (FOREIGN STANDARD)
DIN EN 3155-013:2007
Aerospace series - Electrical contacts used in elements of connection - Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R - Product standard; German and English version EN 3155-012:2006 (FOREIGN STANDARD)
DIN EN 3155-012:2007
Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-009:2009 (Foreign Standard)
DIN EN 3155-009:2009
Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-008:2005 (FOREIGN STANDARD)
DIN EN 3155-008:2006
Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006, Corrigenda to DIN (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3155-005 Berichtigung 1:2007
Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006 (FOREIGN STANDARD)
DIN EN 3155-005:2006
Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-003:2005 (FOREIGN STANDARD)
DIN EN 3155-003:2006
Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts; German and English version EN 3155-002:2006 (FOREIGN STANDARD)
DIN EN 3155-002:2007
Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 3155-001:2000
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 oC - Technical specification; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3152:2005
Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718) (FOREIGN STANDARD)
DIN EN 3151:1995
Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718) (FOREIGN STANDARD)
DIN EN 3150:1995
Aerospace series - Shank nuts - Installation holes, 60? swage, flanges - Design standard (FOREIGN STANDARD)
DIN EN 3149:1996
Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3145:2003
Aerospace series - Rivets, solid, 100? countersunk normal head, in nickel base alloy NI-P11; inch based series (FOREIGN STANDARD)
DIN EN 3144:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in nickel base alloy NI-P11, cadmium plated; inch based series (FOREIGN STANDARD)
DIN EN 3143:1995
Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series (FOREIGN STANDARD)
DIN EN 3142:1996
Aerospace series - Rivets, solid, universal head, in head resisting nickel base alloy NI-P11, cadmium plated, inch based series (FOREIGN STANDARD)
DIN EN 3141:1996
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3140:2001
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3139:2001
Aerospace series - Rivets, solid, 100? countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3138:2001
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in corrosion resisting steel FE-PA11, passivated (FOREIGN STANDARD)
DIN EN 3137:1992
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3135:1996
Aerospace series - Titanium alloy TI-P64003, cold worked and stress relieved - Seamless tube for pressure systems 4 mm D 51 mm, 690 MPa R<(Index)m> 1030 MPa (FOREIGN STANDARD)
DIN EN 3120:1996
Aerospace series - Titanium alloy TI-P46001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3119:1996
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D 10 mm; German and English version EN 3115:2009 (Foreign Standard)
DIN EN 3115:2009
Aerospace series - Test method - Microstructure of ( + á) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming; German and English version EN 3114-004:2006 (FOREIGN STANDARD)
DIN EN 3114-004:2007
Aerospace series - Test method - Microstructure of ( + á) titanium alloy wrought products - Part 003: Microstructure of plate; German and English version EN 3114-003:2006 (FOREIGN STANDARD)
DIN EN 3114-003:2007
Aerospace series - Test method - Microstructure of ( + ) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings; German and English version EN 3114-002:2007 (FOREIGN STANDARD)
DIN EN 3114-002:2007
Aerospace series - Test method - Microstructure of ( + á) titanium alloy wrought products - Part 001: General requirements; German and English version EN 3114-001:2006 (FOREIGN STANDARD)
DIN EN 3114-001:2007
Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3112:1995
Aerospace series - Sealants - Test methods; Determination of low-temperature flexibility (FOREIGN STANDARD)
DIN EN 3102:2000
Aerospace series - Non-metallic materials - Sealants; test methods; determination of resistance to thermal rupture (FOREIGN STANDARD)
DIN EN 3101:1997
Aerospace series - Sealants - Test method; determination of tack-free time (FOREIGN STANDARD)
DIN EN 3096:1996
Aerospace series - Sealants - Test method - Determination of extended assembly time (FOREIGN STANDARD)
DIN EN 3095:1999
Aerospace series - Sealants - Test method; determination of application time (FOREIGN STANDARD)
DIN EN 3094:1996
Aerospace series - hose assemblies - Designation limited to 15 digits (FOREIGN STANDARD)
DIN EN 3086:1999
Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3081:2002
Aerospace series - Pipe coupling 8?30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006 (FOREIGN STANDARD)
DIN EN 3080:2007
Aerospace series - Pipe coupling 8?30' up to 28000 kPa - Adaptors - Metric series - Technical specification; German and English version EN 3079:2006 (FOREIGN STANDARD)
DIN EN 3079:2007
Aerospace series - P, Q and saddle clamps with rubber cushion - Technical specification (FOREIGN STANDARD)
DIN EN 3078:1999
Aerospace series - Clamps worm drive - Technical specification (FOREIGN STANDARD)
DIN EN 3077:1999
Aerospace series - Straight bending of sheets and strips in aluminium and aluminium alloys - Dimensioning methods and calculations of developed lengths (FOREIGN STANDARD)
DIN EN 3071:1997
Aerospace series - Installation holes for self-locking, serrated shank nuts; design Standard (FOREIGN STANDARD)
DIN EN 3065:1996
Aerospace series - Shank nuts, self-locking, serrated - Installation procedure (FOREIGN STANDARD)
DIN EN 3064:1996
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 3063:1994
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads; German and English version EN 3061:2007 (FOREIGN STANDARD)
DIN EN 3061:2008
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3060:2007 (FOREIGN STANDARD)
DIN EN 3060:2008
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3059:2007 (FOREIGN STANDARD)
DIN EN 3059:2008
Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3058:1994
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads (FOREIGN STANDARD)
DIN EN 3057:1994
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3056:1994
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3055:1994
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads (FOREIGN STANDARD)
DIN EN 3054:1994
Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3053:1994
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3052:1999
Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification (FOREIGN STANDARD)
DIN EN 3050:1998
Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 3049:1998
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001 (FOREIGN STANDARD)
DIN EN 3048:2006
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3047:1994
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3046:1994
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3045:1994
Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard (FOREIGN STANDARD)
DIN EN 3044:1998
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa/650 ?C, manufacturing method optional - Technical specification; German and English version EN 3043:2008 (Foreign Standard)
DIN EN 3043:2008
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3038:1996
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated - Classification: 1100 MPa(at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3037:1996
Aerospace series - 100? countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3035:1996
Aerospace series - Nuts, self-locking, hexagonal, with captive washer - In heat resisting steel FE-PA92HT (A286), silver coated - Classification 1100 MPa/425 ?C; German and English version EN 3034:2009 (Foreign Standard)
DIN EN 3034:2009
Aerospace series - Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1100 MPa/425 ?C; German and English version EN 3033:2008 (Foreign Standard)
DIN EN 3033:2008
Aerospace series; test method for dry film lubricants; thickness measurement (FOREIGN STANDARD)
DIN EN 3032:1994
Aerospace series; test method for dry film lubricants; solids content (FOREIGN STANDARD)
DIN EN 3030:1994
Aerospace series; test method for dry film lubricants; salt spray test (FOREIGN STANDARD)
DIN EN 3027:1994
Aerospace series; test method for dry film lubricants; corrosion test on steels specimens (FOREIGN STANDARD)
DIN EN 3026:1994
Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286), silver-plated - Classification: 1 100 MPa (at ambient temperature)/650 ?C; German and English version EN 3020:2008 (Foreign Standard)
DIN EN 3020:2008
Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286) - Classification: 1 100 MPa (at ambient temperature)/650 ?C; German and English version EN 3019:2008 (Foreign Standard)
DIN EN 3019:2008
Aerospace series - Washers, facing/packing - Heat resisting steel; German and English version EN 3017:2008 (FOREIGN STANDARD)
DIN EN 3017:2008
Aerospace series - Washers countersunk, load spreading - Heat resisting steel; German and English version EN 3016:2008 (Foreign Standard)
DIN EN 3016:2008
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3015:2001
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3014:2001
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 3012:1995
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa/730 ?C (FOREIGN STANDARD)
DIN EN 3011:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 ?C (FOREIGN STANDARD)
DIN EN 3010:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa/650 ?C, silver plated (FOREIGN STANDARD)
DIN EN 3009:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 ?C (FOREIGN STANDARD)
DIN EN 3008:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3007:1996
Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3006:1994
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 oC - Technical specificatio (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3005:2005
Aerospace series - Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 ?C; technical specification (FOREIGN STANDARD)
DIN EN 3004:1997
Aerospace series; tempered float glass plies for aircraft applications; technical specification (FOREIGN STANDARD)
DIN EN 3001:1993
Aerospace series - Washers, flat, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 2998:1996
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 013: O-ring seal for jam-nut receptacles - Produ
DIN EN 2997-013:2009
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 012: Jam-nut for jam-nut receptacles - Product s
DIN EN 2997-012:2009
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 005: Hermet (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-005:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 004: Jam-nu (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-004:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 003: Square (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-003:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 002: Specif (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-002:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 001: Techni (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-001:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard; German and English version EN 2996-005:2006 (Foreign Standard)
DIN EN 2996-005:2009
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 - Part 005: With polarized signal contact - Product standard; German and English version EN 2996-005:2006 (FOREIGN STANDARD)
DIN EN 2996-005:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard; German and English version EN 2996-004:2006 (FOREIGN STANDARD)
DIN EN 2996-004:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification; German and English version EN 2996-001:2006 (FOREIGN STANDARD)
DIN EN 2996-001:2008
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard; German and English version EN 2995-005-2006 (FOREIGN STANDARD)
DIN EN 2995-005:2007
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard; German and English version EN 2995-004:2006 (FOREIGN STANDARD)
DIN EN 2995-004:2007
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification; German and English version EN 2995-001:2006 (FOREIGN STANDARD)
DIN EN 2995-001:2007
Aerospace series - Nickel-cadmium batteries - Of format F type (FOREIGN STANDARD)
DIN EN 2993:1996
Aerospace series - Nickel-cadmium batteries - Of format E type (FOREIGN STANDARD)
DIN EN 2991:1996
Aerospace series - Nickel-cadmium batteries of format D type (FOREIGN STANDARD)
DIN EN 2988:1996
Aerospace series - Nickel-cadmium batteries of format C type (FOREIGN STANDARD)
DIN EN 2987:1996
Aerospace series - Nickel-cadmium batteries - Of format B type (FOREIGN STANDARD)
DIN EN 2986:1996
Aerospace series - Nickel-cadmium batteries of format A type (FOREIGN STANDARD)
DIN EN 2985:1996
Aerospace series - Carbon fibre filament yarn (Polyacrylonitrile precursor) - Technical specification (FOREIGN STANDARD)
DIN EN 2962:1996
Aerospace series - Heat resisting alloy NI-PH2601, solution treated; bar for machined fasteners D 50 mm, R<(Index)m> 1270 MPa (FOREIGN STANDARD)
DIN EN 2961:1994
Aerospace series; heat resisting nickel base alloy (Ni-P101 HT); cold worked and solution treated; bar for machining for fasteners 3 D 50 mm (FOREIGN STANDARD)
DIN EN 2960:1988
Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al), solution treated and cold worked - Bar for forged fasteners 3 mm D 30 mm (FOREIGN STANDARD)
DIN EN 2959:2000
Aerospace series; recycling of titanium and titanium alloy scrap (FOREIGN STANDARD)
DIN EN 2955:1993
Aerospace series - Recycling of titanium and titanium alloy scrap (FOREIGN STANDARD)
DIN EN 2955/A1:1995
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked; bar for forged fasteners D 50 mm, 1270 MPa R<(Index)m> 1550 MPa (FOREIGN STANDARD)
DIN EN 2952:1996
Aerospace series - Metallic materials - Test method; micrographic determination of content of non-metallic inclusions (FOREIGN STANDARD)
DIN EN 2951:1998
Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects; German and English version EN 2950:2008 (Foreign Standard)
DIN EN 2950:2009
Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated (FOREIGN STANDARD)
DIN EN 2949:1996
Aerospace series - Washers, tab, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 2948:1996
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D 2,3 mm; German and English version EN 2947:2006 (FOREIGN STANDARD)
DIN EN 2947:2007
Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure (FOREIGN STANDARD)
DIN EN 2945:1998
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004 (FOREIGN STANDARD)
DIN EN 2944:1998
Aerospace series - Inserts, screw thread, helical coil, self-locking - Technical specification (FOREIGN STANDARD)
DIN EN 2943:1998
Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated (FOREIGN STANDARD)
DIN EN 2942:1998
Aerospace series - Nickel alloy rivets - Technical specification; German and English version EN 2941:2008 (Foreign Standard)
DIN EN 2941:2009
Aerospace series - Screws, 100? countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2940:1995
Aerospace series - Screws, 100? countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2939:1994
Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2938:1995
Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2937:1994
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 2936:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 2935:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2934:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2933:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2932:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2931:1994
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 ?C (FOREIGN STANDARD)
DIN EN 2930:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 2929:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2928:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2927:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2926:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2925:1994
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread; classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2924:1997
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2923:1997
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated, left hand thread; Classification: 600 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2922:1997
Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 2914:1996
Aerospace series - Washers, flat, large diameter, in steel, cadmium plated (FOREIGN STANDARD)
DIN EN 2913:2000
Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated (FOREIGN STANDARD)
DIN EN 2912:1996
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2911:1995
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2910:1994
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2909:1995
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2908:1994
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2907:1995
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2906:1994
Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers (FOREIGN STANDARD)
DIN EN 2899:1997
Aerospace series - Corrosion and heat resisting steel rivets - Technical specification; German and English version EN 2898:2008 (Foreign Standard)
DIN EN 2898:2009
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 ?C (FOREIGN STANDARD)
DIN EN 2897:1996
Aerospace series; nuts, hexagonal, plain, normal height, normal across flats, in corrosion resisting steel, passivated; classification: 900 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2895:1994
Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS<(Index)2> lubricated; classification: 1550 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2894:1995
Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C; German and English version EN 2889:2006 (FOREIGN STANDARD)
DIN EN 2889:2007
Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ?C; German and English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2888:2007
Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2887:1995
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 ?C (FOREIGN STANDARD)
DIN EN 2886:1996
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2885:1996
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2884:1996
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2883:1995
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English v (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2882:2008
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa ( (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2881:2007
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/120 ?C (FOREIGN STANDARD)
DIN EN 2880:1998
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2879:1998
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2878:1998
Aerospace series - Nuts, hexagon, plain, reduced height, normal across flats, in aluminium alloy, anodized - Classification: 450 MPa (at ambient temperature)/120 ?C (FOREIGN STANDARD)
DIN EN 2876:1995
Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2874:1996
Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2870:1996
Aerospace series; nuts, hexagonal, slotted/castellated; normal height, normal across flats, in heat resisting steel, silver passivated; classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2869:1993
Aerospace series; nuts, hexagonal, slotted/castellated; normal height, normal across flats, in heat resisting steel, silver plated; classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2868:1993
Aerospace series; nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2867:1993
Aerospace series; nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2866:1993
Aerospace series; nuts, anchor, self-locking, floating, two lug, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2865:1993
Aerospace series; nuts, anchor, self-locking, fixed, 90? corner, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2863:1993
Aerospace series; nuts, anchor, self-locking, fixed, 90? corner, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2862:1993
Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings (FOREIGN STANDARD)
DIN EN 2860-3:1994
Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 2: forging stock (FOREIGN STANDARD)
DIN EN 2860-2:1994
Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2860-1:1994
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2859:2008
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings (FOREIGN STANDARD)
DIN EN 2858-3:1994
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 2: forging stock (FOREIGN STANDARD)
DIN EN 2858-2:1994
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2858-1:1994
Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 ?C; German and English version EN 2856:2006 (FOREIGN STANDARD)
DIN EN 2856:2007
Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm <(hoch)2> - Operating temperatures between -55 ?C and 260 ?C - Part 003: Product standard; German and English version EN 2854-003:2009 (Foreign Stand
DIN EN 2854-003:2009
Aerospace series - Cables, electrical, for general purposes - Cross sections equal to and greater than 9 mm<(hoch)2>; operating temperatures between -55 ?C and 260 ?C - Part 002: General (FOREIGN STANDARD)
DIN EN 2854-002:1996
Aerospace series - Current ratings for electrical cables with conductor EN 2083; German and English version EN 2853:2005 (FOREIGN STANDARD)
DIN EN 2853:2006
Aerospace series - Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction (FOREIGN STANDARD)
DIN EN 2850:1998
Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 4: Unidirectional glass/epoxy resin preimpregnate curing at up to 125 ?C for continuous use up to 80 ?C (FOREIGN STANDARD)
DIN EN 2833-4:1998
Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 3: Glass fabric/epoxy resin preimpregnates curing at up to 180 ?C for continous use up to 120 ?C (FOREIGN STANDARD)
DIN EN 2833-3:1998
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 2: Glass fabric/Epoxy resin preimpregnates curing at up to 125 ?C for continous use up to 80 ?C (FOREIGN STANDARD)
DIN EN 2833-2:1995
Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 2833-1:1998
Aerospace series - Adhesion test for metallic coatings by shot peening (FOREIGN STANDARD)
DIN EN 2829:1995
Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics (FOREIGN STANDARD)
DIN EN 2823:1999
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 200 mm - R<(Index)m> 1310 MPa; German a (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2821:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5), consumable electrode remelted, solution treated and precipitation treated - Forgings a or D 200 mm, R<(Index)m> 1070 MPa (FOREIGN STANDARD)
DIN EN 2818:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, solution treated and precipitation treated - Bar for machining a or D 200 mm, R<(Index)m> 1070 MPa (FOREIGN STANDARD)
DIN EN 2817:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5), consumable electrode remelted, solution treated and precipitation treated - Forgings a or D 200 mm, R<(Index)m> 965 MPa (FOREIGN STANDARD)
DIN EN 2816:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, solution treated and precipitation treated - Bar for machining, a or D 200 mm, R<(Index)m> 965 MPa (FOREIGN STANDARD)
DIN EN 2815:2000
Aerospace series - Aluminium alloy AL-P6061-T6 - Drawn tube for pressure applications 0,6 mm a 12,5 mm (FOREIGN STANDARD)
DIN EN 2813:2000
Aerospace series - Stripping of electric cables (FOREIGN STANDARD)
DIN EN 2812:1997
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2810:2001
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2809:2001
Aerospace series - Anodizing of titanium and titanium alloys (FOREIGN STANDARD)
DIN EN 2808:1997
Aerospace series - Aluminium alloy AL-P7475-T7651 - Plate, 6 mm a 40 mm (FOREIGN STANDARD)
DIN EN 2805:2000
Aerospace series - Aluminium alloy AL-P7075-T7651 - Plate, 6 mm a 25 mm (FOREIGN STANDARD)
DIN EN 2804:2000
Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 2803:2005 (FOREIGN STANDARD)
DIN EN 2803:2005
DIN EN 2802: 2005 (FOREIGN STANDARD)
DIN EN 2802:2005
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 90 IRHD (FOREIGN STANDARD)
DIN EN 2799:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 2798:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 70 IRHD (FOREIGN STANDARD)
DIN EN 2797:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 60 IRHD (FOREIGN STANDARD)
DIN EN 2796:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 50 IRHD (FOREIGN STANDARD)
DIN EN 2795:1995
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard (FOREIGN STANDARD)
DIN EN 2794-004:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard (FOREIGN STANDARD)
DIN EN 2794-003:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 2794-001:1999
DIN EN 3626:2007
Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English version EN 3626:2006 (FOREIGN STANDARD)



Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm